AP1 2000–03 (F20C) → AMP EFI MS3Pro Mini (auto)
AP1 2000–03 (F20C) — AMP EFI — MS3Pro Mini
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-04
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MS3PROMINI-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | 12V+ switched power in | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 10 | Injector out F | — | W25 | — | 0.5 | OEM-B-11 | — | — | — |
| 11 | Injector out G | — | W26 | — | 0.5 | OEM-B-3 | — | — | — |
| 12 | Injector out H | — | W27 | — | 0.5 | OEM-B-4 | — | — | — |
| 13 | Analog in 1 | — | W35 | — | 0.5 | OEM-C-17 | — | — | — |
| 14 | Analog in 2 | — | W37 | — | 0.5 | OEM-A-23 | — | — | — |
| 15 | Analog in 3 | — | W38 | — | 0.5 | OEM-C-15 | — | — | — |
| 16 | Analog in 4 | — | W39 | — | 0.5 | OEM-C-16 | — | — | — |
| 17 | Spark out A | — | W21 | — | 0.5 | OEM-C-4 | — | — | — |
| 18 | Spark out B | — | W22 | — | 0.5 | OEM-C-12 | — | — | — |
| 19 | Spark out C | — | W23 | — | 0.5 | OEM-C-13 | — | — | — |
| 2 | +5V VREF out | — | W15 | — | 0.5 | OEM-C-19 | — | — | — |
| 20 | Spark out D | — | W24 | — | 0.5 | OEM-C-14 | — | — | — |
| 21 | Sensor ground | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 23 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 24 | CAN Low | — | — | — | — | — | — | — | — |
| 25 | CAN High | — | — | — | — | — | — | — | — |
| 26 | CLT in | — | W40 | — | 0.5 | OEM-C-26 | — | — | — |
| 27 | IAT in | — | W41 | — | 0.5 | OEM-C-25 | — | — | — |
| 28 | TPS in | — | W36 | — | 0.5 | OEM-C-27 | — | — | — |
| 29 | Digital switched in 1 / Flex fuel | — | W44 | — | 0.5 | OEM-A-24 | — | — | — |
| 3 | PWM out 1 / Idle | — | W30 | — | 0.5 | OEM-A-16 | — | — | — |
| 30 | CKP+ | — | W16 | — | 0.5 | OEM-C-8 | — | — | — |
| 31 | CKP- | — | — | — | — | — | — | — | — |
| 32 | CMP+ | — | W18 | — | 0.5 | OEM-C-20 | — | — | — |
| 33 | CMP- | — | W20 | — | 0.5 | OEM-C-29 | — | — | — |
| 34 | Digital frequency in 1 (Hall) | — | W42 | — | 0.5 | OEM-A-9 | — | — | — |
| 35 | Digital frequency in 2 (Hall) | — | W43 | — | 0.5 | OEM-C-5 | — | — | — |
| 4 | Fuel pump out | — | W29 | — | 0.5 | OEM-A-15 | — | — | — |
| 5 | Injector out A | — | W28 | — | 0.5 | OEM-B-5 | — | — | — |
| 6 | Injector out B | — | W31 | — | 0.5 | OEM-A-17 | — | — | — |
| 7 | Injector out C | — | W32 | — | 0.5 | OEM-A-20 | — | — | — |
| 8 | Injector out D | — | W33 | — | 0.5 | OEM-A-28 | — | — | — |
| 9 | Injector out E | — | W34 | — | 0.5 | OEM-B-23 | — | — | — |
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Coolant temp gauge drive | — | — | — | — | — | — | — | — |
| 2 | Air control valve solenoid | — | — | — | — | — | — | — | — |
| 3 | Evap bypass solenoid | — | — | — | — | — | — | — | — |
| 4 | Evap canister vent shut valve | — | — | — | — | — | — | — | — |
| 5 | NC | — | — | — | — | — | — | — | — |
| 6 | Evap canister purge valve | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | Vehicle speed sensor | — | W42 | — | 0.5 | MS3PROMINI-A-34 | — | — | — |
| 10 | Service check signal | — | — | — | — | — | — | — | — |
| 11 | NC | — | — | — | — | — | — | — | — |
| 12 | Immobilizer indicator light | — | — | — | — | — | — | — | — |
| 13 | Immobilizer enable signal | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | Fuel pump relay (USDM) | — | W29 | — | 0.5 | MS3PROMINI-A-4 | — | — | — |
| 16 | Fuel pump relay (JDM) | — | W30 | — | 0.5 | MS3PROMINI-A-3 | — | — | — |
| 17 | A/C clutch relay | — | W31 | — | 0.5 | MS3PROMINI-A-6 | — | — | — |
| 18 | Check engine light (MIL) | — | — | — | — | — | — | — | — |
| 19 | Tacho output | — | — | — | — | — | — | — | — |
| 20 | Radiator fan relay | — | W32 | — | 0.5 | MS3PROMINI-A-7 | — | — | — |
| 21 | K-Line | — | — | — | — | — | — | — | — |
| 22 | NC | — | — | — | — | — | — | — | — |
| 23 | Secondary O2 sensor | — | W37 | — | 0.5 | MS3PROMINI-A-14 | — | — | — |
| 24 | Starter switch signal | — | W44 | — | 0.5 | MS3PROMINI-A-29 | — | — | — |
| 25 | Immobilizer code | — | — | — | — | — | — | — | — |
| 26 | Power steering load detect | — | — | — | — | — | — | — | — |
| 27 | A/C switch (request) | — | — | — | — | — | — | — | — |
| 28 | Air pump relay | — | W33 | — | 0.5 | MS3PROMINI-A-8 | — | — | — |
| 29 | Fuel tank pressure sensor | — | — | — | — | — | — | — | — |
| 30 | Electrical load detector | — | — | — | — | — | — | — | — |
| 31 | NC | — | — | — | — | — | — | — | — |
| 32 | Brake switch | — | — | — | — | — | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power source 1 (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | Power ground 1 | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | Injector 2 | — | W26 | — | 0.5 | MS3PROMINI-A-11 | — | — | — |
| 4 | Injector 3 | — | W27 | — | 0.5 | MS3PROMINI-A-12 | — | — | — |
| 5 | Injector 4 | — | W28 | — | 0.5 | MS3PROMINI-A-5 | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | Power source 2 (main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 10 | Power ground 2 | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | Injector 1 | — | W25 | — | 0.5 | MS3PROMINI-A-10 | — | — | — |
| 12 | VTEC solenoid | — | — | — | — | — | — | — | — |
| 13 | NC | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | NC | — | — | — | — | — | — | — | — |
| 16 | NC | — | — | — | — | — | — | — | — |
| 17 | NC | — | — | — | — | — | — | — | — |
| 18 | NC | — | — | — | — | — | — | — | — |
| 19 | NC | — | — | — | — | — | — | — | — |
| 20 | Ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | Backup power (battery constant) | — | — | — | — | — | — | — | — |
| 22 | Ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 23 | Idle air control valve | — | W34 | — | 0.5 | MS3PROMINI-A-9 | — | — | — |
| 24 | NC | — | — | — | — | — | — | — | — |
| 25 | NC | — | — | — | — | — | — | — | — |
OEM-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Primary O2 heater | — | — | — | — | — | — | — | — |
| 2 | Alternator control | — | — | — | — | — | — | — | — |
| 3 | Knock sensor | — | — | — | — | — | — | — | — |
| 4 | Ignition coil 1 | — | W21 | — | 0.5 | MS3PROMINI-A-17 | — | — | — |
| 5 | Alternator FR signal | — | W43 | — | 0.5 | MS3PROMINI-A-35 | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | Sensor ground 1 | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Crank sensor + (CKP+) | — | W16 | — | 0.5 | MS3PROMINI-A-30 | — | — | — |
| 9 | Crank sensor − (CKP−) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | VTEC pressure switch | — | — | — | — | — | — | — | — |
| 11 | Secondary O2 heater control | — | — | — | — | — | — | — | — |
| 12 | Ignition coil 2 | — | W22 | — | 0.5 | MS3PROMINI-A-18 | — | — | — |
| 13 | Ignition coil 3 | — | W23 | — | 0.5 | MS3PROMINI-A-19 | — | — | — |
| 14 | Ignition coil 4 | — | W24 | — | 0.5 | MS3PROMINI-A-20 | — | — | — |
| 15 | Secondary O2 sensor | — | W38 | — | 0.5 | MS3PROMINI-A-15 | — | — | — |
| 16 | Primary O2 sensor | — | W39 | — | 0.5 | MS3PROMINI-A-16 | — | — | — |
| 17 | MAP sensor | — | W35 | — | 0.5 | MS3PROMINI-A-13 | — | — | — |
| 18 | Sensor ground 2 | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Sensor 5V supply 1 (MAP) | — | W15 | — | 0.5 | MS3PROMINI-A-2 | — | — | — |
| 20 | Cam (TDC1) sensor + | — | W18 | — | 0.5 | MS3PROMINI-A-32 | — | — | — |
| 21 | Cam (TDC1) sensor − | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Knock sensor | — | — | — | — | — | — | — | — |
| 23 | NC | — | — | — | — | — | — | — | — |
| 24 | Air pump electric current sensor | — | — | — | — | — | — | — | — |
| 25 | Intake air temp sensor | — | W41 | — | 0.5 | MS3PROMINI-A-27 | — | — | — |
| 26 | Coolant temp sensor | — | W40 | — | 0.5 | MS3PROMINI-A-26 | — | — | — |
| 27 | Throttle position sensor | — | W36 | — | 0.5 | MS3PROMINI-A-28 | — | — | — |
| 28 | Sensor 5V supply 2 | — | — | — | — | — | — | — | — |
| 29 | Cam (TDC2) sensor + | — | W20 | — | 0.5 | MS3PROMINI-A-33 | — | — | — |
| 30 | Cam (TDC2) sensor − | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | Timing ground | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
OEM-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | NC | — | — | — | — | — | — | — | — |
| 2 | NC | — | — | — | — | — | — | — | — |
| 3 | NC | — | — | — | — | — | — | — | — |
| 4 | NC | — | — | — | — | — | — | — | — |
| 5 | NC | — | — | — | — | — | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | NC | — | — | — | — | — | — | — | — |
| 10 | NC | — | — | — | — | — | — | — | — |
| 11 | NC | — | — | — | — | — | — | — | — |
| 12 | NC | — | — | — | — | — | — | — | — |
| 13 | NC | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | NC | — | — | — | — | — | — | — | — |
| 16 | NC | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | MS3PROMINI-A-21 | — | — | — |
| 1 | — | — | W10 | — | 0.5 | OEM-C-18 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-C-30 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-C-31 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-C-7 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-C-9 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-C-21 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-B-1 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-B-9 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MS3PROMINI-A-1 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-B-10 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-B-2 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-B-20 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-B-22 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | MS3PROMINI-A-22 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | MS3PROMINI-A-23 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Coolant temp gauge drive | low_side_out | — | — | — | corroborated | |
| OEM-A-10 | Service check signal | — | — | — | — | single_source | |
| OEM-A-11 | NC | — | — | — | — | unverified | |
| OEM-A-12 | Immobilizer indicator light | low_side_out | — | — | — | single_source | |
| OEM-A-13 | Immobilizer enable signal | — | — | — | — | single_source | |
| OEM-A-14 | NC | — | — | — | — | unverified | |
| OEM-A-15 | Fuel pump relay (USDM) | low_side_out | MS3PROMINI-A-4 | Fuel pump out | low_side_out | corroborated | |
| OEM-A-16 | Fuel pump relay (JDM) | low_side_out | MS3PROMINI-A-3 | PWM out 1 / Idle | low_side_out | single_source | |
| OEM-A-17 | A/C clutch relay | low_side_out | MS3PROMINI-A-6 | Injector out B | injector_out | corroborated | |
| OEM-A-18 | Check engine light (MIL) | low_side_out | — | — | — | corroborated | |
| OEM-A-19 | Tacho output | tacho_out | — | — | — | corroborated | |
| OEM-A-2 | Air control valve solenoid | low_side_out | — | — | — | single_source | |
| OEM-A-20 | Radiator fan relay | low_side_out | MS3PROMINI-A-7 | Injector out C | injector_out | corroborated | |
| OEM-A-21 | K-Line | serial | — | — | — | single_source | |
| OEM-A-22 | NC | — | — | — | — | unverified | |
| OEM-A-23 | Secondary O2 sensor | lambda_nb_in | MS3PROMINI-A-14 | Analog in 2 | analog_in | single_source | |
| OEM-A-24 | Starter switch signal | digital_in | MS3PROMINI-A-29 | Digital switched in 1 / Flex fuel | digital_in | corroborated | |
| OEM-A-25 | Immobilizer code | — | — | — | — | single_source | |
| OEM-A-26 | Power steering load detect | digital_in | — | — | — | corroborated | |
| OEM-A-27 | A/C switch (request) | digital_in | — | — | — | corroborated | |
| OEM-A-28 | Air pump relay | low_side_out | MS3PROMINI-A-8 | Injector out D | injector_out | corroborated | |
| OEM-A-29 | Fuel tank pressure sensor | analog_in | — | — | — | corroborated | |
| OEM-A-3 | Evap bypass solenoid | low_side_out | — | — | — | single_source | |
| OEM-A-30 | Electrical load detector | analog_in | — | — | — | corroborated | |
| OEM-A-31 | NC | — | — | — | — | unverified | |
| OEM-A-32 | Brake switch | digital_in | — | — | — | corroborated | |
| OEM-A-4 | Evap canister vent shut valve | low_side_out | — | — | — | single_source | |
| OEM-A-5 | NC | — | — | — | — | unverified | |
| OEM-A-6 | Evap canister purge valve | low_side_out | — | — | — | single_source | |
| OEM-A-7 | NC | — | — | — | — | unverified | |
| OEM-A-8 | NC | — | — | — | — | unverified | |
| OEM-A-9 | Vehicle speed sensor | digital_in | MS3PROMINI-A-34 | Digital frequency in 1 (Hall) | digital_in | corroborated | |
| OEM-B-1 | Power source 1 (main relay) | power_in | MS3PROMINI-A-1 | 12V+ switched power in | power_in | corroborated | |
| OEM-B-10 | Power ground 2 | ground | MS3PROMINI-A-22 + MS3PROMINI-A-23 | Power ground + Power ground | ground | single_source | |
| OEM-B-11 | Injector 1 | injector_out | MS3PROMINI-A-10 | Injector out F | injector_out | corroborated | |
| OEM-B-12 | VTEC solenoid | high_side_out | — | — | — | corroborated | |
| OEM-B-13 | NC | — | — | — | — | unverified | |
| OEM-B-14 | NC | — | — | — | — | unverified | |
| OEM-B-15 | NC | — | — | — | — | unverified | |
| OEM-B-16 | NC | — | — | — | — | unverified | |
| OEM-B-17 | NC | — | — | — | — | unverified | |
| OEM-B-18 | NC | — | — | — | — | unverified | |
| OEM-B-19 | NC | — | — | — | — | unverified | |
| OEM-B-2 | Power ground 1 | ground | MS3PROMINI-A-22 + MS3PROMINI-A-23 | Power ground + Power ground | ground | corroborated | |
| OEM-B-20 | Ground | ground | MS3PROMINI-A-22 + MS3PROMINI-A-23 | Power ground + Power ground | ground | single_source | |
| OEM-B-21 | Backup power (battery constant) | power_in | — | — | — | single_source | |
| OEM-B-22 | Ground | ground | MS3PROMINI-A-22 + MS3PROMINI-A-23 | Power ground + Power ground | ground | single_source | |
| OEM-B-23 | Idle air control valve | low_side_out | MS3PROMINI-A-9 | Injector out E | injector_out | corroborated | |
| OEM-B-24 | NC | — | — | — | — | unverified | |
| OEM-B-25 | NC | — | — | — | — | unverified | |
| OEM-B-3 | Injector 2 | injector_out | MS3PROMINI-A-11 | Injector out G | injector_out | corroborated | |
| OEM-B-4 | Injector 3 | injector_out | MS3PROMINI-A-12 | Injector out H | injector_out | corroborated | |
| OEM-B-5 | Injector 4 | injector_out | MS3PROMINI-A-5 | Injector out A | injector_out | corroborated | |
| OEM-B-6 | NC | — | — | — | — | unverified | |
| OEM-B-7 | NC | — | — | — | — | unverified | |
| OEM-B-8 | NC | — | — | — | — | unverified | |
| OEM-B-9 | Power source 2 (main relay) | power_in | MS3PROMINI-A-1 | 12V+ switched power in | power_in | corroborated | |
| OEM-C-1 | Primary O2 heater | low_side_out | — | — | — | corroborated | |
| OEM-C-10 | VTEC pressure switch | digital_in | — | — | — | corroborated | |
| OEM-C-11 | Secondary O2 heater control | low_side_out | — | — | — | single_source | |
| OEM-C-12 | Ignition coil 2 | ignition_out | MS3PROMINI-A-18 | Spark out B | ignition_out | corroborated | |
| OEM-C-13 | Ignition coil 3 | ignition_out | MS3PROMINI-A-19 | Spark out C | ignition_out | corroborated | |
| OEM-C-14 | Ignition coil 4 | ignition_out | MS3PROMINI-A-20 | Spark out D | ignition_out | corroborated | |
| OEM-C-15 | Secondary O2 sensor | lambda_nb_in | MS3PROMINI-A-15 | Analog in 3 | analog_in | corroborated | |
| OEM-C-16 | Primary O2 sensor | lambda_nb_in | MS3PROMINI-A-16 | Analog in 4 | analog_in | corroborated | |
| OEM-C-17 | MAP sensor | analog_in | MS3PROMINI-A-13 | Analog in 1 | analog_in | corroborated | |
| OEM-C-18 | Sensor ground 2 | sensor_ground | MS3PROMINI-A-21 | Sensor ground | sensor_ground | corroborated | |
| OEM-C-19 | Sensor 5V supply 1 (MAP) | vref | MS3PROMINI-A-2 | +5V VREF out | vref | corroborated | |
| OEM-C-2 | Alternator control | low_side_out | — | — | — | single_source | |
| OEM-C-20 | Cam (TDC1) sensor + | trigger_in | MS3PROMINI-A-32 | CMP+ | trigger_in | corroborated | |
| OEM-C-21 | Cam (TDC1) sensor − | trigger_in | MS3PROMINI-A-21 | Sensor ground | sensor_ground | corroborated | |
| OEM-C-22 | Knock sensor | knock_in | — | — | — | conflict | |
| OEM-C-23 | NC | — | — | — | — | unverified | |
| OEM-C-24 | Air pump electric current sensor | analog_in | — | — | — | single_source | |
| OEM-C-25 | Intake air temp sensor | temp_in | MS3PROMINI-A-27 | IAT in | temp_in | corroborated | |
| OEM-C-26 | Coolant temp sensor | temp_in | MS3PROMINI-A-26 | CLT in | temp_in | corroborated | |
| OEM-C-27 | Throttle position sensor | analog_in | MS3PROMINI-A-28 | TPS in | analog_in | corroborated | |
| OEM-C-28 | Sensor 5V supply 2 | vref | — | — | — | corroborated | |
| OEM-C-29 | Cam (TDC2) sensor + | trigger_in | MS3PROMINI-A-33 | CMP- | trigger_in | corroborated | |
| OEM-C-3 | Knock sensor | knock_in | — | — | — | conflict | |
| OEM-C-30 | Cam (TDC2) sensor − | sensor_ground | MS3PROMINI-A-21 | Sensor ground | sensor_ground | corroborated | |
| OEM-C-31 | Timing ground | sensor_ground | MS3PROMINI-A-21 | Sensor ground | sensor_ground | single_source | |
| OEM-C-4 | Ignition coil 1 | ignition_out | MS3PROMINI-A-17 | Spark out A | ignition_out | corroborated | |
| OEM-C-5 | Alternator FR signal | digital_in | MS3PROMINI-A-35 | Digital frequency in 2 (Hall) | digital_in | single_source | |
| OEM-C-6 | NC | — | — | — | — | unverified | |
| OEM-C-7 | Sensor ground 1 | sensor_ground | MS3PROMINI-A-21 | Sensor ground | sensor_ground | corroborated | |
| OEM-C-8 | Crank sensor + (CKP+) | trigger_in | MS3PROMINI-A-30 | CKP+ | trigger_in | corroborated | |
| OEM-C-9 | Crank sensor − (CKP−) | trigger_in | MS3PROMINI-A-21 | Sensor ground | sensor_ground | corroborated | |
| OEM-D-1 | NC | — | — | — | — | unverified | |
| OEM-D-10 | NC | — | — | — | — | unverified | |
| OEM-D-11 | NC | — | — | — | — | unverified | |
| OEM-D-12 | NC | — | — | — | — | unverified | |
| OEM-D-13 | NC | — | — | — | — | unverified | |
| OEM-D-14 | NC | — | — | — | — | unverified | |
| OEM-D-15 | NC | — | — | — | — | unverified | |
| OEM-D-16 | NC | — | — | — | — | unverified | |
| OEM-D-2 | NC | — | — | — | — | unverified | |
| OEM-D-3 | NC | — | — | — | — | unverified | |
| OEM-D-4 | NC | — | — | — | — | unverified | |
| OEM-D-5 | NC | — | — | — | — | unverified | |
| OEM-D-6 | NC | — | — | — | — | unverified | |
| OEM-D-7 | NC | — | — | — | — | unverified | |
| OEM-D-8 | NC | — | — | — | — | unverified | |
| OEM-D-9 | NC | — | — | — | — | unverified |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-B-1 | SP-14V-1 | 0.85 | no route | Power source 1 (main relay) | — | |
| W2 | OEM-B-9 | SP-14V-1 | 0.85 | no route | Power source 2 (main relay) | — | |
| W3 | SP-14V-1 | MS3PROMINI-A-1 | 0.85 | no route | 12V+ switched power in | — | |
| W4 | OEM-B-10 | SP-GND-1 | 0.85 | no route | Power ground 2 | — | |
| W5 | OEM-B-2 | SP-GND-1 | 0.85 | no route | Power ground 1 | — | |
| W6 | OEM-B-20 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W7 | OEM-B-22 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W8 | SP-GND-1 | MS3PROMINI-A-22 | 0.85 | no route | Power ground | — | |
| W9 | SP-GND-1 | MS3PROMINI-A-23 | 0.85 | no route | Power ground | — | |
| W10 | OEM-C-18 | SP-0V-1 | 0.5 | no route | Sensor ground 2 | — | |
| W11 | OEM-C-30 | SP-0V-1 | 0.5 | no route | Cam (TDC2) sensor − | — | |
| W12 | OEM-C-31 | SP-0V-1 | 0.5 | no route | Timing ground | — | |
| W13 | OEM-C-7 | SP-0V-1 | 0.5 | no route | Sensor ground 1 | — | |
| W14 | SP-0V-1 | MS3PROMINI-A-21 | 0.5 | no route | Sensor ground | — | |
| W15 | OEM-C-19 | MS3PROMINI-A-2 | 0.5 | no route | Sensor 5V supply 1 (MAP) | — | |
| W16 | OEM-C-8 | MS3PROMINI-A-30 | 0.5 | no route | Crank sensor + (CKP+) | — | |
| W17 | OEM-C-9 | SP-0V-1 | 0.5 | no route | Crank sensor − (CKP−) | — | |
| W18 | OEM-C-20 | MS3PROMINI-A-32 | 0.5 | no route | Cam (TDC1) sensor + | — | |
| W19 | OEM-C-21 | SP-0V-1 | 0.5 | no route | Cam (TDC1) sensor − | — | |
| W20 | OEM-C-29 | MS3PROMINI-A-33 | 0.5 | no route | Cam (TDC2) sensor + | — | |
| W21 | OEM-C-4 | MS3PROMINI-A-17 | 0.5 | no route | Ignition coil 1 | — | |
| W22 | OEM-C-12 | MS3PROMINI-A-18 | 0.5 | no route | Ignition coil 2 | — | |
| W23 | OEM-C-13 | MS3PROMINI-A-19 | 0.5 | no route | Ignition coil 3 | — | |
| W24 | OEM-C-14 | MS3PROMINI-A-20 | 0.5 | no route | Ignition coil 4 | — | |
| W25 | OEM-B-11 | MS3PROMINI-A-10 | 0.5 | no route | Injector 1 | — | |
| W26 | OEM-B-3 | MS3PROMINI-A-11 | 0.5 | no route | Injector 2 | — | |
| W27 | OEM-B-4 | MS3PROMINI-A-12 | 0.5 | no route | Injector 3 | — | |
| W28 | OEM-B-5 | MS3PROMINI-A-5 | 0.5 | no route | Injector 4 | — | |
| W29 | OEM-A-15 | MS3PROMINI-A-4 | 0.5 | no route | Fuel pump relay (USDM) | — | |
| W30 | OEM-A-16 | MS3PROMINI-A-3 | 0.5 | no route | Fuel pump relay (JDM) | — | |
| W31 | OEM-A-17 | MS3PROMINI-A-6 | 0.5 | no route | A/C clutch relay | — | |
| W32 | OEM-A-20 | MS3PROMINI-A-7 | 0.5 | no route | Radiator fan relay | — | |
| W33 | OEM-A-28 | MS3PROMINI-A-8 | 0.5 | no route | Air pump relay | — | |
| W34 | OEM-B-23 | MS3PROMINI-A-9 | 0.5 | no route | Idle air control valve | — | |
| W35 | OEM-C-17 | MS3PROMINI-A-13 | 0.5 | no route | MAP sensor | — | |
| W36 | OEM-C-27 | MS3PROMINI-A-28 | 0.5 | no route | Throttle position sensor | — | |
| W37 | OEM-A-23 | MS3PROMINI-A-14 | 0.5 | no route | Secondary O2 sensor | — | |
| W38 | OEM-C-15 | MS3PROMINI-A-15 | 0.5 | no route | Secondary O2 sensor | — | |
| W39 | OEM-C-16 | MS3PROMINI-A-16 | 0.5 | no route | Primary O2 sensor | — | |
| W40 | OEM-C-26 | MS3PROMINI-A-26 | 0.5 | no route | Coolant temp sensor | — | |
| W41 | OEM-C-25 | MS3PROMINI-A-27 | 0.5 | no route | Intake air temp sensor | — | |
| W42 | OEM-A-9 | MS3PROMINI-A-34 | 0.5 | no route | Vehicle speed sensor | — | |
| W43 | OEM-C-5 | MS3PROMINI-A-35 | 0.5 | no route | Alternator FR signal | — | |
| W44 | OEM-A-24 | MS3PROMINI-A-29 | 0.5 | no route | Starter switch signal | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 179679-6 | TE | S2000 2000–05 ECU harness plug B (25P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | 179680-5 | TE | S2000 2000–05 ECU harness plug C (31P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | 179681-6 | TE | S2000 2000–05 ECU harness plug A (32P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | S2K-0005-ECU-D | Honda | S2000 2000–05 ECU plug D (P/N unknown) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (8)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | NET_MERGED | MS3PROMINI-A-21 + OEM-C-18 + OEM-C-21 + OEM-C-30 + OEM-C-31 + OEM-C-7 + OEM-C-9 + SP-0V-1 | 2 different OEM functions share one net: OEM-C-21 Cam (TDC1) sensor −; OEM-C-9 Crank sensor − (CKP−) |
| error | REQUIRED_UNMAPPED | OEM-C-28 | Required OEM function "Sensor 5V supply 2" (vref) is not connected to the new ECU. |
| info | NET_FAMILY | OEM-A-17 ↔ MS3PROMINI-A-6 | OEM-A-17 "A/C clutch relay" [low_side_out] is wired to MS3PROMINI-A-6 "Injector out B" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-20 ↔ MS3PROMINI-A-7 | OEM-A-20 "Radiator fan relay" [low_side_out] is wired to MS3PROMINI-A-7 "Injector out C" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A-28 ↔ MS3PROMINI-A-8 | OEM-A-28 "Air pump relay" [low_side_out] is wired to MS3PROMINI-A-8 "Injector out D" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-23 ↔ MS3PROMINI-A-9 | OEM-B-23 "Idle air control valve" [low_side_out] is wired to MS3PROMINI-A-9 "Injector out E" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-C-7 ↔ OEM-C-21 | OEM-C-7 "Sensor ground 1" [sensor_ground] is wired to OEM-C-21 "Cam (TDC1) sensor −" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 26 optional OEM pins are not mapped: OEM-A-1 Coolant temp gauge drive; OEM-A-10 Service check signal; OEM-A-12 Immobilizer indicator light; OEM-A-13 Immobilizer enable signal; OEM-A-18 Check engine light (MIL); OEM-A-19 Tacho output; OEM-A-2 Air control valve solenoid; OEM-A-21 K-Line; OEM-A-25 Immobilizer code; OEM-A-26 Power steering load detect; OEM-A-27 A/C switch (request); OEM-A-29 Fuel tank pressure sensor; OEM-A-3 Evap bypass solenoid; OEM-A-30 Electrical load detector; OEM-A-32 Brake switch; OEM-A-4 Evap canister vent shut valve; OEM-A-6 Evap canister purge valve; OEM-B-12 VTEC solenoid; OEM-B-21 Backup power (battery constant); OEM-C-1 Primary O2 heater; OEM-C-10 VTEC pressure switch; OEM-C-11 Secondary O2 heater control; OEM-C-2 Alternator control; OEM-C-22 Knock sensor; OEM-C-24 Air pump electric current sensor; OEM-C-3 Knock sensor |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-04. Review every wire against both manuals before building. Open items: - OEM-C 28: Sensor 5V supply 2: no free 5 V reference left on AMP EFI MS3Pro Mini for supply group "s2k_vcc2" (groups must stay separate) Not wired: - OEM-B 21: Backup power (battery constant): AMP EFI MS3Pro Mini has no battery-constant input; not needed - OEM-C 3: Knock sensor: no free knock input on AMP EFI MS3Pro Mini - OEM-C 22: Knock sensor: no free knock input on AMP EFI MS3Pro Mini - OEM-B 12: VTEC solenoid: no free high_side/ls_hs/hbridge rated ≥ 1.0 A on AMP EFI MS3Pro Mini - OEM-C 1: Primary O2 heater: no free heater_low_side/low_side/ls_hs/hbridge on AMP EFI MS3Pro Mini - OEM-C 11: Secondary O2 heater control: no free heater_low_side/low_side/ls_hs/hbridge on AMP EFI MS3Pro Mini - OEM-A 1: Coolant temp gauge drive: no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-A 12: Immobilizer indicator light: no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-A 18: Check engine light (MIL): no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-A 2: Air control valve solenoid: no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-A 3: Evap bypass solenoid: no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-A 4: Evap canister vent shut valve: no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-A 6: Evap canister purge valve: no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-C 2: Alternator control: no free low_side/ls_hs/injector/hbridge on AMP EFI MS3Pro Mini - OEM-A 19: Tacho output: no free tacho/frequency_out/low_side/ls_hs on AMP EFI MS3Pro Mini - OEM-A 29: Fuel tank pressure sensor: no free analog_0_5 on AMP EFI MS3Pro Mini - OEM-A 30: Electrical load detector: no free analog_0_5 on AMP EFI MS3Pro Mini - OEM-C 24: Air pump electric current sensor: no free analog_0_5 on AMP EFI MS3Pro Mini - OEM-A 26: Power steering load detect: no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro Mini - OEM-A 27: A/C switch (request): no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro Mini - OEM-A 32: Brake switch: no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro Mini - OEM-C 10: VTEC pressure switch: no free switch_in/frequency_in/analog_0_5 on AMP EFI MS3Pro Mini - OEM-A 21: K-Line: no free k_line on AMP EFI MS3Pro Mini - OEM-A 10: Service check signal: not classified in the library; wire by hand - OEM-A 13: Immobilizer enable signal: not classified in the library; wire by hand - OEM-A 25: Immobilizer code: not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL |
|---|---|---|---|
| 4 | vendor_doc | AEM 30-6052 Series 2 Plug & Play EMS, 2000–2005 S2000 (original ECU pinout) | https://documents.aemelectronics.com/techlibrary_30-6052_series_2_plug___play_ems.pdf |
| 4 | vendor_doc | AMP EFI: MS3Pro Mini manual (fw 1.6.1) pinout & output ratings | https://cdn.shopify.com/s/files/1/0960/0014/7754/files/MS3Pro_User_Manual_Firmware_1.6.1_Mini.pdf?v=1760643335 |
| 4 | vendor_doc | Haltech KB: F20C (AP1) engine | https://support.haltech.com/portal/en/kb/articles/f20c-ap1-engine |
| 4 | vendor_doc | Link S2000 AP1 PlugIn installation manual | https://linkecu.com/documentation/S2000X.pdf |
| 2 | forum | AllPinouts: 2000–2005 Honda S2000 ECU | https://allpinouts.org/pinouts/connectors/car/2000-2005-honda-s2000-ecu/ |
| 2 | forum | Autodata blog: ECU Pinout Honda S2000 2000-2004 | http://autodatas.blogspot.com/2012/11/ecu-pinout-honda-s2000-2000-2004.html |
| 2 | derived | Typical load estimates (relay coil ~0.2 A, high-Z injector ~1.2 A, VVT solenoid ~1 A) | — |