AP1 2000–03 (F20C) → MaxxECU MaxxECU MINI REV10+ (auto)
AP1 2000–03 (F20C) — MaxxECU — MaxxECU MINI
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-04
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUMINI-C1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | TRIGGER | — | W18 | — | 0.5 | OEM-C-8 | — | — | — |
| A2 | TRIGGER GND | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| B1 | DIN 1 (Hall only) | — | W37 | — | 0.5 | OEM-A-9 | — | — | — |
| B2 | DIN 2 (Hall only) | — | W38 | — | 0.5 | OEM-C-5 | — | — | — |
| B3 | SENSOR GND | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| B4 | SENSOR GND | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| C1 | CLT | — | W35 | — | 0.5 | OEM-C-26 | — | — | — |
| C2 | IAT | — | W36 | — | 0.5 | OEM-C-25 | — | — | — |
| C3 | AIN 3 (0-5V) | — | W32 | — | 0.5 | OEM-C-17 | — | — | — |
| C4 | AIN 4 (0-5V) | — | W34 | — | 0.5 | OEM-A-23 | — | — | — |
| D1 | GPO 8/TACHO | — | W31 | — | 0.5 | OEM-A-20 | — | — | — |
| D2 | TPS | — | W33 | — | 0.5 | OEM-C-27 | — | — | — |
| D3 | GND Shield | — | — | — | — | — | — | — | — |
| D4 | SENSOR GND | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| E1 | GPO 3 | — | W30 | — | 0.5 | OEM-A-17 | — | — | — |
| E2 | +5V sensor supply | — | W17 | — | 0.5 | OEM-C-19 | — | — | — |
| E3 | CAN L | — | — | — | — | — | — | — | — |
| E4 | CAN H | — | — | — | — | — | — | — | — |
| F1 | IGN 1 | — | W20 | — | 0.5 | OEM-C-4 | — | — | — |
| F2 | IGN 2 | — | W21 | — | 0.5 | OEM-C-12 | — | — | — |
| F3 | IGN 3 | — | W22 | — | 0.5 | OEM-C-13 | — | — | — |
| F4 | IGN 4 | — | W23 | — | 0.5 | OEM-C-14 | — | — | — |
| G1 | GPO 2 | — | W29 | — | 0.5 | OEM-A-16 | — | — | — |
| G2 | GPO 1 | — | W28 | — | 0.5 | OEM-A-15 | — | — | — |
| G3 | INJ 1 | — | W24 | — | 0.5 | OEM-B-11 | — | — | — |
| G4 | ENGINE GND | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| H1 | INJ 2 | — | W25 | — | 0.5 | OEM-B-3 | — | — | — |
| H2 | INJ 3 | — | W26 | — | 0.5 | OEM-B-4 | — | — | — |
| H3 | INJ 4 | — | W27 | — | 0.5 | OEM-B-5 | — | — | — |
| H4 | +12V (ECU power supply) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Coolant temp gauge drive | — | — | — | — | — | — | — | — |
| 2 | Air control valve solenoid | — | — | — | — | — | — | — | — |
| 3 | Evap bypass solenoid | — | — | — | — | — | — | — | — |
| 4 | Evap canister vent shut valve | — | — | — | — | — | — | — | — |
| 5 | NC | — | — | — | — | — | — | — | — |
| 6 | Evap canister purge valve | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | Vehicle speed sensor | — | W37 | — | 0.5 | MAXXECUMINI-C1-B1 | — | — | — |
| 10 | Service check signal | — | — | — | — | — | — | — | — |
| 11 | NC | — | — | — | — | — | — | — | — |
| 12 | Immobilizer indicator light | — | — | — | — | — | — | — | — |
| 13 | Immobilizer enable signal | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | Fuel pump relay (USDM) | — | W28 | — | 0.5 | MAXXECUMINI-C1-G2 | — | — | — |
| 16 | Fuel pump relay (JDM) | — | W29 | — | 0.5 | MAXXECUMINI-C1-G1 | — | — | — |
| 17 | A/C clutch relay | — | W30 | — | 0.5 | MAXXECUMINI-C1-E1 | — | — | — |
| 18 | Check engine light (MIL) | — | — | — | — | — | — | — | — |
| 19 | Tacho output | — | — | — | — | — | — | — | — |
| 20 | Radiator fan relay | — | W31 | — | 0.5 | MAXXECUMINI-C1-D1 | — | — | — |
| 21 | K-Line | — | — | — | — | — | — | — | — |
| 22 | NC | — | — | — | — | — | — | — | — |
| 23 | Secondary O2 sensor | — | W34 | — | 0.5 | MAXXECUMINI-C1-C4 | — | — | — |
| 24 | Starter switch signal | — | — | — | — | — | — | — | — |
| 25 | Immobilizer code | — | — | — | — | — | — | — | — |
| 26 | Power steering load detect | — | — | — | — | — | — | — | — |
| 27 | A/C switch (request) | — | — | — | — | — | — | — | — |
| 28 | Air pump relay | — | — | — | — | — | — | — | — |
| 29 | Fuel tank pressure sensor | — | — | — | — | — | — | — | — |
| 30 | Electrical load detector | — | — | — | — | — | — | — | — |
| 31 | NC | — | — | — | — | — | — | — | — |
| 32 | Brake switch | — | — | — | — | — | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power source 1 (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | Power ground 1 | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | Injector 2 | — | W25 | — | 0.5 | MAXXECUMINI-C1-H1 | — | — | — |
| 4 | Injector 3 | — | W26 | — | 0.5 | MAXXECUMINI-C1-H2 | — | — | — |
| 5 | Injector 4 | — | W27 | — | 0.5 | MAXXECUMINI-C1-H3 | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | Power source 2 (main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 10 | Power ground 2 | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | Injector 1 | — | W24 | — | 0.5 | MAXXECUMINI-C1-G3 | — | — | — |
| 12 | VTEC solenoid | — | — | — | — | — | — | — | — |
| 13 | NC | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | NC | — | — | — | — | — | — | — | — |
| 16 | NC | — | — | — | — | — | — | — | — |
| 17 | NC | — | — | — | — | — | — | — | — |
| 18 | NC | — | — | — | — | — | — | — | — |
| 19 | NC | — | — | — | — | — | — | — | — |
| 20 | Ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | Backup power (battery constant) | — | — | — | — | — | — | — | — |
| 22 | Ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 23 | Idle air control valve | — | — | — | — | — | — | — | — |
| 24 | NC | — | — | — | — | — | — | — | — |
| 25 | NC | — | — | — | — | — | — | — | — |
OEM-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Primary O2 heater | — | — | — | — | — | — | — | — |
| 2 | Alternator control | — | — | — | — | — | — | — | — |
| 3 | Knock sensor | — | — | — | — | — | — | — | — |
| 4 | Ignition coil 1 | — | W20 | — | 0.5 | MAXXECUMINI-C1-F1 | — | — | — |
| 5 | Alternator FR signal | — | W38 | — | 0.5 | MAXXECUMINI-C1-B2 | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | Sensor ground 1 | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Crank sensor + (CKP+) | — | W18 | — | 0.5 | MAXXECUMINI-C1-A1 | — | — | — |
| 9 | Crank sensor − (CKP−) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | VTEC pressure switch | — | — | — | — | — | — | — | — |
| 11 | Secondary O2 heater control | — | — | — | — | — | — | — | — |
| 12 | Ignition coil 2 | — | W21 | — | 0.5 | MAXXECUMINI-C1-F2 | — | — | — |
| 13 | Ignition coil 3 | — | W22 | — | 0.5 | MAXXECUMINI-C1-F3 | — | — | — |
| 14 | Ignition coil 4 | — | W23 | — | 0.5 | MAXXECUMINI-C1-F4 | — | — | — |
| 15 | Secondary O2 sensor | — | — | — | — | — | — | — | — |
| 16 | Primary O2 sensor | — | — | — | — | — | — | — | — |
| 17 | MAP sensor | — | W32 | — | 0.5 | MAXXECUMINI-C1-C3 | — | — | — |
| 18 | Sensor ground 2 | — | W9 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Sensor 5V supply 1 (MAP) | — | W17 | — | 0.5 | MAXXECUMINI-C1-E2 | — | — | — |
| 20 | Cam (TDC1) sensor + | — | — | — | — | — | — | — | — |
| 21 | Cam (TDC1) sensor − | — | — | — | — | — | — | — | — |
| 22 | Knock sensor | — | — | — | — | — | — | — | — |
| 23 | NC | — | — | — | — | — | — | — | — |
| 24 | Air pump electric current sensor | — | — | — | — | — | — | — | — |
| 25 | Intake air temp sensor | — | W36 | — | 0.5 | MAXXECUMINI-C1-C2 | — | — | — |
| 26 | Coolant temp sensor | — | W35 | — | 0.5 | MAXXECUMINI-C1-C1 | — | — | — |
| 27 | Throttle position sensor | — | W33 | — | 0.5 | MAXXECUMINI-C1-D2 | — | — | — |
| 28 | Sensor 5V supply 2 | — | — | — | — | — | — | — | — |
| 29 | Cam (TDC2) sensor + | — | — | — | — | — | — | — | — |
| 30 | Cam (TDC2) sensor − | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | Timing ground | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
OEM-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | NC | — | — | — | — | — | — | — | — |
| 2 | NC | — | — | — | — | — | — | — | — |
| 3 | NC | — | — | — | — | — | — | — | — |
| 4 | NC | — | — | — | — | — | — | — | — |
| 5 | NC | — | — | — | — | — | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | NC | — | — | — | — | — | — | — | — |
| 10 | NC | — | — | — | — | — | — | — | — |
| 11 | NC | — | — | — | — | — | — | — | — |
| 12 | NC | — | — | — | — | — | — | — | — |
| 13 | NC | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | NC | — | — | — | — | — | — | — | — |
| 16 | NC | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W15 | — | 0.5 | MAXXECUMINI-C1-B4 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | MAXXECUMINI-C1-D4 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-C-9 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | MAXXECUMINI-C1-B3 | — | — | — |
| 1 | — | — | W9 | — | 0.5 | OEM-C-18 | — | — | — |
| 1 | — | — | W10 | — | 0.5 | OEM-C-30 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-C-31 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-C-7 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | MAXXECUMINI-C1-A2 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-B-1 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-B-9 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MAXXECUMINI-C1-H4 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-B-10 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-B-2 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-B-20 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-B-22 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | MAXXECUMINI-C1-G4 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Coolant temp gauge drive | low_side_out | — | — | — | corroborated | |
| OEM-A-10 | Service check signal | — | — | — | — | single_source | |
| OEM-A-11 | NC | — | — | — | — | unverified | |
| OEM-A-12 | Immobilizer indicator light | low_side_out | — | — | — | single_source | |
| OEM-A-13 | Immobilizer enable signal | — | — | — | — | single_source | |
| OEM-A-14 | NC | — | — | — | — | unverified | |
| OEM-A-15 | Fuel pump relay (USDM) | low_side_out | MAXXECUMINI-C1-G2 | GPO 1 | low_side_out | corroborated | |
| OEM-A-16 | Fuel pump relay (JDM) | low_side_out | MAXXECUMINI-C1-G1 | GPO 2 | low_side_out | single_source | |
| OEM-A-17 | A/C clutch relay | low_side_out | MAXXECUMINI-C1-E1 | GPO 3 | low_side_out | corroborated | |
| OEM-A-18 | Check engine light (MIL) | low_side_out | — | — | — | corroborated | |
| OEM-A-19 | Tacho output | tacho_out | — | — | — | corroborated | |
| OEM-A-2 | Air control valve solenoid | low_side_out | — | — | — | single_source | |
| OEM-A-20 | Radiator fan relay | low_side_out | MAXXECUMINI-C1-D1 | GPO 8/TACHO | low_side_out | corroborated | |
| OEM-A-21 | K-Line | serial | — | — | — | single_source | |
| OEM-A-22 | NC | — | — | — | — | unverified | |
| OEM-A-23 | Secondary O2 sensor | lambda_nb_in | MAXXECUMINI-C1-C4 | AIN 4 (0-5V) | analog_in | single_source | |
| OEM-A-24 | Starter switch signal | digital_in | — | — | — | corroborated | |
| OEM-A-25 | Immobilizer code | — | — | — | — | single_source | |
| OEM-A-26 | Power steering load detect | digital_in | — | — | — | corroborated | |
| OEM-A-27 | A/C switch (request) | digital_in | — | — | — | corroborated | |
| OEM-A-28 | Air pump relay | low_side_out | — | — | — | corroborated | |
| OEM-A-29 | Fuel tank pressure sensor | analog_in | — | — | — | corroborated | |
| OEM-A-3 | Evap bypass solenoid | low_side_out | — | — | — | single_source | |
| OEM-A-30 | Electrical load detector | analog_in | — | — | — | corroborated | |
| OEM-A-31 | NC | — | — | — | — | unverified | |
| OEM-A-32 | Brake switch | digital_in | — | — | — | corroborated | |
| OEM-A-4 | Evap canister vent shut valve | low_side_out | — | — | — | single_source | |
| OEM-A-5 | NC | — | — | — | — | unverified | |
| OEM-A-6 | Evap canister purge valve | low_side_out | — | — | — | single_source | |
| OEM-A-7 | NC | — | — | — | — | unverified | |
| OEM-A-8 | NC | — | — | — | — | unverified | |
| OEM-A-9 | Vehicle speed sensor | digital_in | MAXXECUMINI-C1-B1 | DIN 1 (Hall only) | digital_in | corroborated | |
| OEM-B-1 | Power source 1 (main relay) | power_in | MAXXECUMINI-C1-H4 | +12V (ECU power supply) | power_in | corroborated | |
| OEM-B-10 | Power ground 2 | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-B-11 | Injector 1 | injector_out | MAXXECUMINI-C1-G3 | INJ 1 | injector_out | corroborated | |
| OEM-B-12 | VTEC solenoid | high_side_out | — | — | — | corroborated | |
| OEM-B-13 | NC | — | — | — | — | unverified | |
| OEM-B-14 | NC | — | — | — | — | unverified | |
| OEM-B-15 | NC | — | — | — | — | unverified | |
| OEM-B-16 | NC | — | — | — | — | unverified | |
| OEM-B-17 | NC | — | — | — | — | unverified | |
| OEM-B-18 | NC | — | — | — | — | unverified | |
| OEM-B-19 | NC | — | — | — | — | unverified | |
| OEM-B-2 | Power ground 1 | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | corroborated | |
| OEM-B-20 | Ground | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-B-21 | Backup power (battery constant) | power_in | — | — | — | single_source | |
| OEM-B-22 | Ground | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-B-23 | Idle air control valve | low_side_out | — | — | — | corroborated | |
| OEM-B-24 | NC | — | — | — | — | unverified | |
| OEM-B-25 | NC | — | — | — | — | unverified | |
| OEM-B-3 | Injector 2 | injector_out | MAXXECUMINI-C1-H1 | INJ 2 | injector_out | corroborated | |
| OEM-B-4 | Injector 3 | injector_out | MAXXECUMINI-C1-H2 | INJ 3 | injector_out | corroborated | |
| OEM-B-5 | Injector 4 | injector_out | MAXXECUMINI-C1-H3 | INJ 4 | injector_out | corroborated | |
| OEM-B-6 | NC | — | — | — | — | unverified | |
| OEM-B-7 | NC | — | — | — | — | unverified | |
| OEM-B-8 | NC | — | — | — | — | unverified | |
| OEM-B-9 | Power source 2 (main relay) | power_in | MAXXECUMINI-C1-H4 | +12V (ECU power supply) | power_in | corroborated | |
| OEM-C-1 | Primary O2 heater | low_side_out | — | — | — | corroborated | |
| OEM-C-10 | VTEC pressure switch | digital_in | — | — | — | corroborated | |
| OEM-C-11 | Secondary O2 heater control | low_side_out | — | — | — | single_source | |
| OEM-C-12 | Ignition coil 2 | ignition_out | MAXXECUMINI-C1-F2 | IGN 2 | ignition_out | corroborated | |
| OEM-C-13 | Ignition coil 3 | ignition_out | MAXXECUMINI-C1-F3 | IGN 3 | ignition_out | corroborated | |
| OEM-C-14 | Ignition coil 4 | ignition_out | MAXXECUMINI-C1-F4 | IGN 4 | ignition_out | corroborated | |
| OEM-C-15 | Secondary O2 sensor | lambda_nb_in | — | — | — | corroborated | |
| OEM-C-16 | Primary O2 sensor | lambda_nb_in | — | — | — | corroborated | |
| OEM-C-17 | MAP sensor | analog_in | MAXXECUMINI-C1-C3 | AIN 3 (0-5V) | analog_in | corroborated | |
| OEM-C-18 | Sensor ground 2 | sensor_ground | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-C-19 | Sensor 5V supply 1 (MAP) | vref | MAXXECUMINI-C1-E2 | +5V sensor supply | vref | corroborated | |
| OEM-C-2 | Alternator control | low_side_out | — | — | — | single_source | |
| OEM-C-20 | Cam (TDC1) sensor + | trigger_in | — | — | — | corroborated | |
| OEM-C-21 | Cam (TDC1) sensor − | trigger_in | — | — | — | corroborated | |
| OEM-C-22 | Knock sensor | knock_in | — | — | — | conflict | |
| OEM-C-23 | NC | — | — | — | — | unverified | |
| OEM-C-24 | Air pump electric current sensor | analog_in | — | — | — | single_source | |
| OEM-C-25 | Intake air temp sensor | temp_in | MAXXECUMINI-C1-C2 | IAT | temp_in | corroborated | |
| OEM-C-26 | Coolant temp sensor | temp_in | MAXXECUMINI-C1-C1 | CLT | temp_in | corroborated | |
| OEM-C-27 | Throttle position sensor | analog_in | MAXXECUMINI-C1-D2 | TPS | analog_in | corroborated | |
| OEM-C-28 | Sensor 5V supply 2 | vref | — | — | — | corroborated | |
| OEM-C-29 | Cam (TDC2) sensor + | trigger_in | — | — | — | corroborated | |
| OEM-C-3 | Knock sensor | knock_in | — | — | — | conflict | |
| OEM-C-30 | Cam (TDC2) sensor − | sensor_ground | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-C-31 | Timing ground | sensor_ground | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | single_source | |
| OEM-C-4 | Ignition coil 1 | ignition_out | MAXXECUMINI-C1-F1 | IGN 1 | ignition_out | corroborated | |
| OEM-C-5 | Alternator FR signal | digital_in | MAXXECUMINI-C1-B2 | DIN 2 (Hall only) | digital_in | single_source | |
| OEM-C-6 | NC | — | — | — | — | unverified | |
| OEM-C-7 | Sensor ground 1 | sensor_ground | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-C-8 | Crank sensor + (CKP+) | trigger_in | MAXXECUMINI-C1-A1 | TRIGGER | trigger_in | corroborated | |
| OEM-C-9 | Crank sensor − (CKP−) | trigger_in | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-D-1 | NC | — | — | — | — | unverified | |
| OEM-D-10 | NC | — | — | — | — | unverified | |
| OEM-D-11 | NC | — | — | — | — | unverified | |
| OEM-D-12 | NC | — | — | — | — | unverified | |
| OEM-D-13 | NC | — | — | — | — | unverified | |
| OEM-D-14 | NC | — | — | — | — | unverified | |
| OEM-D-15 | NC | — | — | — | — | unverified | |
| OEM-D-16 | NC | — | — | — | — | unverified | |
| OEM-D-2 | NC | — | — | — | — | unverified | |
| OEM-D-3 | NC | — | — | — | — | unverified | |
| OEM-D-4 | NC | — | — | — | — | unverified | |
| OEM-D-5 | NC | — | — | — | — | unverified | |
| OEM-D-6 | NC | — | — | — | — | unverified | |
| OEM-D-7 | NC | — | — | — | — | unverified | |
| OEM-D-8 | NC | — | — | — | — | unverified | |
| OEM-D-9 | NC | — | — | — | — | unverified |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-B-1 | SP-14V-1 | 0.85 | no route | Power source 1 (main relay) | — | |
| W2 | OEM-B-9 | SP-14V-1 | 0.85 | no route | Power source 2 (main relay) | — | |
| W3 | SP-14V-1 | MAXXECUMINI-C1-H4 | 0.85 | no route | +12V (ECU power supply) | — | |
| W4 | OEM-B-10 | SP-GND-1 | 0.85 | no route | Power ground 2 | — | |
| W5 | OEM-B-2 | SP-GND-1 | 0.85 | no route | Power ground 1 | — | |
| W6 | OEM-B-20 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W7 | OEM-B-22 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W8 | SP-GND-1 | MAXXECUMINI-C1-G4 | 0.85 | no route | ENGINE GND | — | |
| W9 | OEM-C-18 | SP-0V-1 | 0.5 | no route | Sensor ground 2 | — | |
| W10 | OEM-C-30 | SP-0V-1 | 0.5 | no route | Cam (TDC2) sensor − | — | |
| W11 | OEM-C-31 | SP-0V-1 | 0.5 | no route | Timing ground | — | |
| W12 | OEM-C-7 | SP-0V-1 | 0.5 | no route | Sensor ground 1 | — | |
| W13 | SP-0V-1 | MAXXECUMINI-C1-A2 | 0.5 | no route | TRIGGER GND | — | |
| W14 | SP-0V-1 | MAXXECUMINI-C1-B3 | 0.5 | no route | SENSOR GND | — | |
| W15 | SP-0V-1 | MAXXECUMINI-C1-B4 | 0.5 | no route | SENSOR GND | — | |
| W16 | SP-0V-1 | MAXXECUMINI-C1-D4 | 0.5 | no route | SENSOR GND | — | |
| W17 | OEM-C-19 | MAXXECUMINI-C1-E2 | 0.5 | no route | Sensor 5V supply 1 (MAP) | — | |
| W18 | OEM-C-8 | MAXXECUMINI-C1-A1 | 0.5 | no route | Crank sensor + (CKP+) | — | |
| W19 | OEM-C-9 | SP-0V-1 | 0.5 | no route | Crank sensor − (CKP−) | — | |
| W20 | OEM-C-4 | MAXXECUMINI-C1-F1 | 0.5 | no route | Ignition coil 1 | — | |
| W21 | OEM-C-12 | MAXXECUMINI-C1-F2 | 0.5 | no route | Ignition coil 2 | — | |
| W22 | OEM-C-13 | MAXXECUMINI-C1-F3 | 0.5 | no route | Ignition coil 3 | — | |
| W23 | OEM-C-14 | MAXXECUMINI-C1-F4 | 0.5 | no route | Ignition coil 4 | — | |
| W24 | OEM-B-11 | MAXXECUMINI-C1-G3 | 0.5 | no route | Injector 1 | — | |
| W25 | OEM-B-3 | MAXXECUMINI-C1-H1 | 0.5 | no route | Injector 2 | — | |
| W26 | OEM-B-4 | MAXXECUMINI-C1-H2 | 0.5 | no route | Injector 3 | — | |
| W27 | OEM-B-5 | MAXXECUMINI-C1-H3 | 0.5 | no route | Injector 4 | — | |
| W28 | OEM-A-15 | MAXXECUMINI-C1-G2 | 0.5 | no route | Fuel pump relay (USDM) | — | |
| W29 | OEM-A-16 | MAXXECUMINI-C1-G1 | 0.5 | no route | Fuel pump relay (JDM) | — | |
| W30 | OEM-A-17 | MAXXECUMINI-C1-E1 | 0.5 | no route | A/C clutch relay | — | |
| W31 | OEM-A-20 | MAXXECUMINI-C1-D1 | 0.5 | no route | Radiator fan relay | — | |
| W32 | OEM-C-17 | MAXXECUMINI-C1-C3 | 0.5 | no route | MAP sensor | — | |
| W33 | OEM-C-27 | MAXXECUMINI-C1-D2 | 0.5 | no route | Throttle position sensor | — | |
| W34 | OEM-A-23 | MAXXECUMINI-C1-C4 | 0.5 | no route | Secondary O2 sensor | — | |
| W35 | OEM-C-26 | MAXXECUMINI-C1-C1 | 0.5 | no route | Coolant temp sensor | — | |
| W36 | OEM-C-25 | MAXXECUMINI-C1-C2 | 0.5 | no route | Intake air temp sensor | — | |
| W37 | OEM-A-9 | MAXXECUMINI-C1-B1 | 0.5 | no route | Vehicle speed sensor | — | |
| W38 | OEM-C-5 | MAXXECUMINI-C1-B2 | 0.5 | no route | Alternator FR signal | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 179679-6 | TE | S2000 2000–05 ECU harness plug B (25P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | 179680-5 | TE | S2000 2000–05 ECU harness plug C (31P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | 179681-6 | TE | S2000 2000–05 ECU harness plug A (32P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | S2K-0005-ECU-D | Honda | S2000 2000–05 ECU plug D (P/N unknown) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (9)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-C-20 | Required OEM function "Cam (TDC1) sensor +" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C-21 | Required OEM function "Cam (TDC1) sensor −" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C-28 | Required OEM function "Sensor 5V supply 2" (vref) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-D1 | MAXXECUMINI-C1-D1 "GPO 8/TACHO" drives OEM-A-20 Radiator fan relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-E1 | MAXXECUMINI-C1-E1 "GPO 3" drives OEM-A-17 A/C clutch relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-G1 | MAXXECUMINI-C1-G1 "GPO 2" drives OEM-A-16 Fuel pump relay (JDM) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-G2 | MAXXECUMINI-C1-G2 "GPO 1" drives OEM-A-15 Fuel pump relay (USDM) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| info | NET_FAMILY | OEM-C-9 ↔ MAXXECUMINI-C1-B3 | OEM-C-9 "Crank sensor − (CKP−)" [trigger_in] is wired to MAXXECUMINI-C1-B3 "SENSOR GND" [sensor_ground]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 32 optional OEM pins are not mapped: OEM-A-1 Coolant temp gauge drive; OEM-A-10 Service check signal; OEM-A-12 Immobilizer indicator light; OEM-A-13 Immobilizer enable signal; OEM-A-18 Check engine light (MIL); OEM-A-19 Tacho output; OEM-A-2 Air control valve solenoid; OEM-A-21 K-Line; OEM-A-24 Starter switch signal; OEM-A-25 Immobilizer code; OEM-A-26 Power steering load detect; OEM-A-27 A/C switch (request); OEM-A-28 Air pump relay; OEM-A-29 Fuel tank pressure sensor; OEM-A-3 Evap bypass solenoid; OEM-A-30 Electrical load detector; OEM-A-32 Brake switch; OEM-A-4 Evap canister vent shut valve; OEM-A-6 Evap canister purge valve; OEM-B-12 VTEC solenoid; OEM-B-21 Backup power (battery constant); OEM-B-23 Idle air control valve; OEM-C-1 Primary O2 heater; OEM-C-10 VTEC pressure switch; OEM-C-11 Secondary O2 heater control; OEM-C-15 Secondary O2 sensor; OEM-C-16 Primary O2 sensor; OEM-C-2 Alternator control; OEM-C-22 Knock sensor; OEM-C-24 Air pump electric current sensor; OEM-C-29 Cam (TDC2) sensor +; OEM-C-3 Knock sensor |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-04. Review every wire against both manuals before building. Open items: - OEM-C 28: Sensor 5V supply 2: no free 5 V reference left on MaxxECU MaxxECU MINI for supply group "s2k_vcc2" (groups must stay separate) - OEM-C 20: Cam (TDC1) sensor +: no free cam_vr/cam_hall/frequency_in input on MaxxECU MaxxECU MINI - OEM-C 21: Cam (TDC1) sensor −: no free cam_vr/cam_hall/frequency_in input on MaxxECU MaxxECU MINI Not wired: - OEM-B 21: Backup power (battery constant): MaxxECU MaxxECU MINI has no battery-constant input; not needed - OEM-C 29: Cam (TDC2) sensor +: no free cam_vr/cam_hall/frequency_in input on MaxxECU MaxxECU MINI - OEM-C 3: Knock sensor: no free knock input on MaxxECU MaxxECU MINI - OEM-C 22: Knock sensor: no free knock input on MaxxECU MaxxECU MINI - OEM-A 28: Air pump relay: no free relay_control/low_side/ls_hs/injector/hbridge rated ≥ 0.2 A on MaxxECU MaxxECU MINI - OEM-B 12: VTEC solenoid: no free high_side/ls_hs/hbridge rated ≥ 1.0 A on MaxxECU MaxxECU MINI - OEM-C 1: Primary O2 heater: no free heater_low_side/low_side/ls_hs/hbridge on MaxxECU MaxxECU MINI - OEM-C 11: Secondary O2 heater control: no free heater_low_side/low_side/ls_hs/hbridge on MaxxECU MaxxECU MINI - OEM-B 23: Idle air control valve: no free low_side/ls_hs/injector/hbridge rated ≥ 1.0 A on MaxxECU MaxxECU MINI - OEM-A 1: Coolant temp gauge drive: no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-A 12: Immobilizer indicator light: no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-A 18: Check engine light (MIL): no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-A 2: Air control valve solenoid: no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-A 3: Evap bypass solenoid: no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-A 4: Evap canister vent shut valve: no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-A 6: Evap canister purge valve: no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-C 2: Alternator control: no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-A 19: Tacho output: no free tacho/frequency_out/low_side/ls_hs on MaxxECU MaxxECU MINI - OEM-C 15: Secondary O2 sensor: no free o2_narrowband/analog_0_5 on MaxxECU MaxxECU MINI - OEM-C 16: Primary O2 sensor: no free o2_narrowband/analog_0_5 on MaxxECU MaxxECU MINI - OEM-A 29: Fuel tank pressure sensor: no free analog_0_5 on MaxxECU MaxxECU MINI - OEM-A 30: Electrical load detector: no free analog_0_5 on MaxxECU MaxxECU MINI - OEM-C 24: Air pump electric current sensor: no free analog_0_5 on MaxxECU MaxxECU MINI - OEM-A 24: Starter switch signal: no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-A 26: Power steering load detect: no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-A 27: A/C switch (request): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-A 32: Brake switch: no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-C 10: VTEC pressure switch: no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-A 21: K-Line: no free k_line on MaxxECU MaxxECU MINI - OEM-A 10: Service check signal: not classified in the library; wire by hand - OEM-A 13: Immobilizer enable signal: not classified in the library; wire by hand - OEM-A 25: Immobilizer code: not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL |
|---|---|---|---|
| 4 | vendor_doc | AEM 30-6052 Series 2 Plug & Play EMS, 2000–2005 S2000 (original ECU pinout) | https://documents.aemelectronics.com/techlibrary_30-6052_series_2_plug___play_ems.pdf |
| 4 | vendor_doc | Haltech KB: F20C (AP1) engine | https://support.haltech.com/portal/en/kb/articles/f20c-ap1-engine |
| 4 | vendor_doc | Link S2000 AP1 PlugIn installation manual | https://linkecu.com/documentation/S2000X.pdf |
| 4 | vendor_doc | MaxxECU GEN1 pinout (MINI / STREET / SPORT / V1 / RACE / PRO) | http://www.maxxecu.com/webhelp/wirings-maxxecu_pinout.html |
| 2 | forum | AllPinouts: 2000–2005 Honda S2000 ECU | https://allpinouts.org/pinouts/connectors/car/2000-2005-honda-s2000-ecu/ |
| 2 | forum | Autodata blog: ECU Pinout Honda S2000 2000-2004 | http://autodatas.blogspot.com/2012/11/ecu-pinout-honda-s2000-2000-2004.html |
| 2 | derived | Typical load estimates (relay coil ~0.2 A, high-Z injector ~1.2 A, VVT solenoid ~1 A) | — |