AP1 2000–03 (F20C) → MaxxECU MaxxECU PRO REV10+ (auto)
AP1 2000–03 (F20C) — MaxxECU — MaxxECU PRO
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-05
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUPRO-C1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | GPO 5 | — | W40 | — | 0.5 | OEM-A-28 | — | — | — |
| A2 | IGN 1 | — | W28 | — | 0.5 | OEM-C-4 | — | — | — |
| A3 | IGN 2 | — | W29 | — | 0.5 | OEM-C-12 | — | — | — |
| A4 | GPO 8/TACHO | — | W46 | — | 0.5 | OEM-A-12 | — | — | — |
| B1 | GPO 6 | — | W44 | — | 0.5 | OEM-B-23 | — | — | — |
| B2 | IGN 3 | — | W30 | — | 0.5 | OEM-C-13 | — | — | — |
| B3 | IGN 4 | — | W31 | — | 0.5 | OEM-C-14 | — | — | — |
| B4 | GPO 1 | — | W36 | — | 0.5 | OEM-A-15 | — | — | — |
| C1 | GPO 7 | — | W45 | — | 0.5 | OEM-A-1 | — | — | — |
| C2 | IGN 5 | — | — | — | — | — | — | — | — |
| C3 | IGN 6 | — | — | — | — | — | — | — | — |
| C4 | GPO 2 | — | W37 | — | 0.5 | OEM-A-16 | — | — | — |
| D1 | WBO2 Heater- | — | W42 | — | 0.5 | OEM-C-1 | — | — | — |
| D2 | IGN 7 | — | — | — | — | — | — | — | — |
| D3 | IGN 8 | — | — | — | — | — | — | — | — |
| D4 | GPO 3 | — | W38 | — | 0.5 | OEM-A-17 | — | — | — |
| E1 | CAN H | — | — | — | — | — | — | — | — |
| E2 | CAN L | — | — | — | — | — | — | — | — |
| E3 | GND Shield | — | — | — | — | — | — | — | — |
| E4 | GPO 4 | — | W39 | — | 0.5 | OEM-A-20 | — | — | — |
| F1 | CLT | — | — | — | — | — | — | — | — |
| F2 | IAT | — | — | — | — | — | — | — | — |
| F3 | WBO2 VREF | — | — | — | — | — | — | — | — |
| F4 | WBO2 VS | — | — | — | — | — | — | — | — |
| G1 | +5V sensor supply | — | W22 | — | 0.5 | OEM-C-19 | — | — | — |
| G2 | TPS/AIN | — | W55 | — | 0.5 | OEM-C-27 | — | — | — |
| G3 | WBO2 IP | — | — | — | — | — | — | — | — |
| G4 | WBO2 RCAL | — | — | — | — | — | — | — | — |
| H1 | Sensor GND | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| H2 | Trigger GND | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| H3 | TRIGGER | — | W24 | — | 0.5 | OEM-C-8 | — | — | — |
| H4 | HOME | — | W26 | — | 0.5 | OEM-C-20 | — | — | — |
| J1 | AIN 1 (temperature) | — | W59 | — | 0.5 | OEM-C-26 | — | — | — |
| J2 | AIN 2 (temperature) | — | W60 | — | 0.5 | OEM-C-25 | — | — | — |
| J3 | AIN 3 (0-5V) | — | W54 | — | 0.5 | OEM-C-17 | — | — | — |
| J4 | AIN 4 (0-5V) | — | W56 | — | 0.5 | OEM-A-23 | — | — | — |
| K1 | INJ 1 | — | W32 | — | 0.5 | OEM-B-11 | — | — | — |
| K2 | INJ 2 | — | W33 | — | 0.5 | OEM-B-3 | — | — | — |
| K3 | DIN/VR 1 | — | W64 | — | 0.5 | OEM-A-9 | — | — | — |
| K4 | DIN/VR 2 | — | W65 | — | 0.5 | OEM-C-5 | — | — | — |
| L1 | INJ 8 | — | — | — | — | — | — | — | — |
| L2 | INJ 7 | — | — | — | — | — | — | — | — |
| L3 | INJ 6 | — | — | — | — | — | — | — | — |
| L4 | Engine GND | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| M1 | INJ 3 | — | W34 | — | 0.5 | OEM-B-4 | — | — | — |
| M2 | INJ 4 | — | W35 | — | 0.5 | OEM-B-5 | — | — | — |
| M3 | INJ 5 | — | — | — | — | — | — | — | — |
| M4 | +12V ECU power supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
MAXXECUPRO-C2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | EGT 1+ | — | — | — | — | — | — | — | — |
| A2 | EGT 2+ | — | — | — | — | — | — | — | — |
| A3 | EGT 3+ | — | — | — | — | — | — | — | — |
| A4 | EGT 4+ | — | — | — | — | — | — | — | — |
| B1 | EGT 1- | — | — | — | — | — | — | — | — |
| B2 | EGT 2- | — | — | — | — | — | — | — | — |
| B3 | EGT 3- | — | — | — | — | — | — | — | — |
| B4 | EGT 4- | — | — | — | — | — | — | — | — |
| C1 | EGT 5+ | — | — | — | — | — | — | — | — |
| C2 | EGT 6+ | — | — | — | — | — | — | — | — |
| C3 | EGT 7+ | — | — | — | — | — | — | — | — |
| C4 | EGT 8+ | — | — | — | — | — | — | — | — |
| D1 | EGT 5- | — | — | — | — | — | — | — | — |
| D2 | EGT 6- | — | — | — | — | — | — | — | — |
| D3 | EGT 7- | — | — | — | — | — | — | — | — |
| D4 | EGT 8- | — | — | — | — | — | — | — | — |
| E1 | EGT 9+ | — | — | — | — | — | — | — | — |
| E2 | EGT 10+ | — | — | — | — | — | — | — | — |
| E3 | EGT 11+ | — | — | — | — | — | — | — | — |
| E4 | EGT 12+ | — | — | — | — | — | — | — | — |
| F1 | EGT 9- | — | — | — | — | — | — | — | — |
| F2 | EGT 10- | — | — | — | — | — | — | — | — |
| F3 | EGT 11- | — | — | — | — | — | — | — | — |
| F4 | EGT 12- | — | — | — | — | — | — | — | — |
| H1 | Engine ground 3 | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| H2 | Engine ground 3 | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| H3 | Engine ground 3 | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUPRO-C3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | DIN/VR 4 | — | W67 | — | 0.5 | OEM-A-26 | — | — | — |
| A2 | DIN/VR 5 | — | — | — | — | — | — | — | — |
| A3 | DIN 6 (SWITCH) | — | W66 | — | 0.5 | OEM-A-24 | — | — | — |
| A4 | DIN 7 (SWITCH) | — | W68 | — | 0.5 | OEM-A-27 | — | — | — |
| B1 | WBO2 2 RCAL | — | — | — | — | — | — | — | — |
| B2 | WBO2 2 IP | — | — | — | — | — | — | — | — |
| B3 | WBO2 2 VS | — | — | — | — | — | — | — | — |
| B4 | WBO2 2 COM | — | — | — | — | — | — | — | — |
| C1 | WBO2 2 Shield | — | — | — | — | — | — | — | — |
| C2 | +5V SENSOR SUPPLY 2 | — | W23 | — | 0.5 | OEM-C-28 | — | — | — |
| C3 | ANALOG IN 5 (0-5V) | — | W57 | — | 0.5 | OEM-C-15 | — | — | — |
| C4 | GPO 19 (12V) | — | — | — | — | — | — | — | — |
| D1 | ANALOG IN 6 (0-5V) | — | W58 | — | 0.5 | OEM-C-16 | — | — | — |
| D2 | ANALOG IN 7 (0-5V) | — | W61 | — | 0.5 | OEM-A-29 | — | — | — |
| D3 | ANALOG IN 8 (0-5V) | — | W62 | — | 0.5 | OEM-A-30 | — | — | — |
| D4 | GPO 20 (12V) | — | — | — | — | — | — | — | — |
| E1 | GPO 10/WBO2 2 HTR | — | W43 | — | 0.5 | OEM-C-11 | — | — | — |
| E2 | ANALOG IN 9 (0-5V) | — | W63 | — | 0.5 | OEM-C-24 | — | — | — |
| E3 | ANALOG IN 10 (0-5V) | — | — | — | — | — | — | — | — |
| E4 | GPO 21 (12V) | — | — | — | — | — | — | — | — |
| F1 | INJECTOR OUT 15 | — | — | — | — | — | — | — | — |
| F2 | ANALOG IN 11 (0-5V) | — | — | — | — | — | — | — | — |
| F3 | ANALOG IN 12 (0-5V) | — | — | — | — | — | — | — | — |
| F4 | GPO 22 (12V) | — | — | — | — | — | — | — | — |
| G1 | INJECTOR OUT 14 | — | — | — | — | — | — | — | — |
| G2 | IGNITION OUT 11 | — | — | — | — | — | — | — | — |
| G3 | IGNITION OUT 9 | — | — | — | — | — | — | — | — |
| G4 | GPO 15 (12V) | — | W41 | — | 0.5 | OEM-B-12 | — | — | — |
| H1 | INJECTOR OUT 13 | — | — | — | — | — | — | — | — |
| H2 | IGNITION OUT 12 | — | — | — | — | — | — | — | — |
| H3 | IGNITION OUT 10 | — | — | — | — | — | — | — | — |
| H4 | GPO 16 (12V) | — | — | — | — | — | — | — | — |
| J1 | INJECTOR OUT 16 | — | — | — | — | — | — | — | — |
| J2 | SENSOR GND | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| J3 | SENSOR GND | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| J4 | GPO 17 (12V) | — | — | — | — | — | — | — | — |
| K1 | INJECTOR OUT 10 | — | — | — | — | — | — | — | — |
| K2 | INJECTOR OUT 9 | — | — | — | — | — | — | — | — |
| K3 | KEY IN 12V | — | — | — | — | — | — | — | — |
| K4 | GPO 18 (12V) | — | — | — | — | — | — | — | — |
| L1 | INJECTOR OUT 11 | — | — | — | — | — | — | — | — |
| L2 | GPO 12/MOTOR 1 + | — | — | — | — | — | — | — | — |
| L3 | GPO 11/MOTOR 1 - | — | — | — | — | — | — | — | — |
| L4 | ENGINE GROUND 2 | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| M1 | INJECTOR OUT 12 | — | — | — | — | — | — | — | — |
| M2 | GPO 13/MOTOR 2 + | — | — | — | — | — | — | — | — |
| M3 | GPO 14/MOTOR 2 - | — | — | — | — | — | — | — | — |
| M4 | 12V ECU 2 | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
MAXXECUPRO-C4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | CAN 2 H | — | — | — | — | — | — | — | — |
| A2 | CAN 2 L | — | — | — | — | — | — | — | — |
| A3 | 0-5V out 1 | — | — | — | — | — | — | — | — |
| A4 | 0-5V out 2 | — | — | — | — | — | — | — | — |
| B1 | AIN 18 (0-5V) | — | — | — | — | — | — | — | — |
| B2 | AIN 17 (0-5V) | — | — | — | — | — | — | — | — |
| B3 | AIN 16 (0-5V) | — | — | — | — | — | — | — | — |
| B4 | AIN 15 (0-5V) | — | — | — | — | — | — | — | — |
| C1 | AIN 14 (0-5V) | — | — | — | — | — | — | — | — |
| C2 | AIN 13 (0-5V) | — | — | — | — | — | — | — | — |
| C3 | AIN 19 (temp) | — | — | — | — | — | — | — | — |
| C4 | AIN 20 (temp) | — | — | — | — | — | — | — | — |
| D1 | AIN 21 (temp) | — | — | — | — | — | — | — | — |
| D2 | AIN 22 (temp) | — | — | — | — | — | — | — | — |
| D3 | DIN 8 (switch) | — | W69 | — | 0.5 | OEM-A-32 | — | — | — |
| D4 | DIN 9 (switch) | — | W70 | — | 0.5 | OEM-C-10 | — | — | — |
| E1 | DIN 10 (switch) | — | — | — | — | — | — | — | — |
| E2 | DIN 11 (switch) | — | — | — | — | — | — | — | — |
| E3 | +5V sensor supply 3 | — | — | — | — | — | — | — | — |
| E4 | 5-10V sensor supply | — | — | — | — | — | — | — | — |
| F1 | GPO 23-30 flyback | — | — | — | — | — | — | — | — |
| F2 | Knock 1 | — | — | — | — | — | — | — | — |
| F3 | Knock 2 | — | — | — | — | — | — | — | — |
| F4 | Sensor GND3 / knock ground | — | — | — | — | — | — | — | — |
| G1 | GPO 23 | — | W47 | — | 0.5 | OEM-A-18 | — | — | — |
| G2 | GPO 24 | — | W48 | — | 0.5 | OEM-A-2 | — | — | — |
| G3 | GPO 25 | — | W49 | — | 0.5 | OEM-A-3 | — | — | — |
| G4 | GPO 26 | — | W50 | — | 0.5 | OEM-A-4 | — | — | — |
| H1 | GPO 27 | — | W51 | — | 0.5 | OEM-A-6 | — | — | — |
| H2 | GPO 28 | — | W52 | — | 0.5 | OEM-C-2 | — | — | — |
| H3 | GPO 29 | — | W53 | — | 0.5 | OEM-A-19 | — | — | — |
| H4 | GPO 30 | — | — | — | — | — | — | — | — |
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Coolant temp gauge drive | — | W45 | — | 0.5 | MAXXECUPRO-C1-C1 | — | — | — |
| 2 | Air control valve solenoid | — | W48 | — | 0.5 | MAXXECUPRO-C4-G2 | — | — | — |
| 3 | Evap bypass solenoid | — | W49 | — | 0.5 | MAXXECUPRO-C4-G3 | — | — | — |
| 4 | Evap canister vent shut valve | — | W50 | — | 0.5 | MAXXECUPRO-C4-G4 | — | — | — |
| 5 | NC | — | — | — | — | — | — | — | — |
| 6 | Evap canister purge valve | — | W51 | — | 0.5 | MAXXECUPRO-C4-H1 | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | Vehicle speed sensor | — | W64 | — | 0.5 | MAXXECUPRO-C1-K3 | — | — | — |
| 10 | Service check signal | — | — | — | — | — | — | — | — |
| 11 | NC | — | — | — | — | — | — | — | — |
| 12 | Immobilizer indicator light | — | W46 | — | 0.5 | MAXXECUPRO-C1-A4 | — | — | — |
| 13 | Immobilizer enable signal | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | Fuel pump relay (USDM) | — | W36 | — | 0.5 | MAXXECUPRO-C1-B4 | — | — | — |
| 16 | Fuel pump relay (JDM) | — | W37 | — | 0.5 | MAXXECUPRO-C1-C4 | — | — | — |
| 17 | A/C clutch relay | — | W38 | — | 0.5 | MAXXECUPRO-C1-D4 | — | — | — |
| 18 | Check engine light (MIL) | — | W47 | — | 0.5 | MAXXECUPRO-C4-G1 | — | — | — |
| 19 | Tacho output | — | W53 | — | 0.5 | MAXXECUPRO-C4-H3 | — | — | — |
| 20 | Radiator fan relay | — | W39 | — | 0.5 | MAXXECUPRO-C1-E4 | — | — | — |
| 21 | K-Line | — | — | — | — | — | — | — | — |
| 22 | NC | — | — | — | — | — | — | — | — |
| 23 | Secondary O2 sensor | — | W56 | — | 0.5 | MAXXECUPRO-C1-J4 | — | — | — |
| 24 | Starter switch signal | — | W66 | — | 0.5 | MAXXECUPRO-C3-A3 | — | — | — |
| 25 | Immobilizer code | — | — | — | — | — | — | — | — |
| 26 | Power steering load detect | — | W67 | — | 0.5 | MAXXECUPRO-C3-A1 | — | — | — |
| 27 | A/C switch (request) | — | W68 | — | 0.5 | MAXXECUPRO-C3-A4 | — | — | — |
| 28 | Air pump relay | — | W40 | — | 0.5 | MAXXECUPRO-C1-A1 | — | — | — |
| 29 | Fuel tank pressure sensor | — | W61 | — | 0.5 | MAXXECUPRO-C3-D2 | — | — | — |
| 30 | Electrical load detector | — | W62 | — | 0.5 | MAXXECUPRO-C3-D3 | — | — | — |
| 31 | NC | — | — | — | — | — | — | — | — |
| 32 | Brake switch | — | W69 | — | 0.5 | MAXXECUPRO-C4-D3 | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power source 1 (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | Power ground 1 | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | Injector 2 | — | W33 | — | 0.5 | MAXXECUPRO-C1-K2 | — | — | — |
| 4 | Injector 3 | — | W34 | — | 0.5 | MAXXECUPRO-C1-M1 | — | — | — |
| 5 | Injector 4 | — | W35 | — | 0.5 | MAXXECUPRO-C1-M2 | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | Power source 2 (main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 10 | Power ground 2 | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | Injector 1 | — | W32 | — | 0.5 | MAXXECUPRO-C1-K1 | — | — | — |
| 12 | VTEC solenoid | — | W41 | — | 0.5 | MAXXECUPRO-C3-G4 | — | — | — |
| 13 | NC | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | NC | — | — | — | — | — | — | — | — |
| 16 | NC | — | — | — | — | — | — | — | — |
| 17 | NC | — | — | — | — | — | — | — | — |
| 18 | NC | — | — | — | — | — | — | — | — |
| 19 | NC | — | — | — | — | — | — | — | — |
| 20 | Ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | Backup power (battery constant) | — | — | — | — | — | — | — | — |
| 22 | Ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 23 | Idle air control valve | — | W44 | — | 0.5 | MAXXECUPRO-C1-B1 | — | — | — |
| 24 | NC | — | — | — | — | — | — | — | — |
| 25 | NC | — | — | — | — | — | — | — | — |
OEM-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Primary O2 heater | — | W42 | — | 0.5 | MAXXECUPRO-C1-D1 | — | — | — |
| 2 | Alternator control | — | W52 | — | 0.5 | MAXXECUPRO-C4-H2 | — | — | — |
| 3 | Knock sensor | — | — | — | — | — | — | — | — |
| 4 | Ignition coil 1 | — | W28 | — | 0.5 | MAXXECUPRO-C1-A2 | — | — | — |
| 5 | Alternator FR signal | — | W65 | — | 0.5 | MAXXECUPRO-C1-K4 | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | Sensor ground 1 | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Crank sensor + (CKP+) | — | W24 | — | 0.5 | MAXXECUPRO-C1-H3 | — | — | — |
| 9 | Crank sensor − (CKP−) | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | VTEC pressure switch | — | W70 | — | 0.5 | MAXXECUPRO-C4-D4 | — | — | — |
| 11 | Secondary O2 heater control | — | W43 | — | 0.5 | MAXXECUPRO-C3-E1 | — | — | — |
| 12 | Ignition coil 2 | — | W29 | — | 0.5 | MAXXECUPRO-C1-A3 | — | — | — |
| 13 | Ignition coil 3 | — | W30 | — | 0.5 | MAXXECUPRO-C1-B2 | — | — | — |
| 14 | Ignition coil 4 | — | W31 | — | 0.5 | MAXXECUPRO-C1-B3 | — | — | — |
| 15 | Secondary O2 sensor | — | W57 | — | 0.5 | MAXXECUPRO-C3-C3 | — | — | — |
| 16 | Primary O2 sensor | — | W58 | — | 0.5 | MAXXECUPRO-C3-D1 | — | — | — |
| 17 | MAP sensor | — | W54 | — | 0.5 | MAXXECUPRO-C1-J3 | — | — | — |
| 18 | Sensor ground 2 | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Sensor 5V supply 1 (MAP) | — | W22 | — | 0.5 | MAXXECUPRO-C1-G1 | — | — | — |
| 20 | Cam (TDC1) sensor + | — | W26 | — | 0.5 | MAXXECUPRO-C1-H4 | — | — | — |
| 21 | Cam (TDC1) sensor − | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Knock sensor | — | — | — | — | — | — | — | — |
| 23 | NC | — | — | — | — | — | — | — | — |
| 24 | Air pump electric current sensor | — | W63 | — | 0.5 | MAXXECUPRO-C3-E2 | — | — | — |
| 25 | Intake air temp sensor | — | W60 | — | 0.5 | MAXXECUPRO-C1-J2 | — | — | — |
| 26 | Coolant temp sensor | — | W59 | — | 0.5 | MAXXECUPRO-C1-J1 | — | — | — |
| 27 | Throttle position sensor | — | W55 | — | 0.5 | MAXXECUPRO-C1-G2 | — | — | — |
| 28 | Sensor 5V supply 2 | — | W23 | — | 0.5 | MAXXECUPRO-C3-C2 | — | — | — |
| 29 | Cam (TDC2) sensor + | — | — | — | — | — | — | — | — |
| 30 | Cam (TDC2) sensor − | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | Timing ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
OEM-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | NC | — | — | — | — | — | — | — | — |
| 2 | NC | — | — | — | — | — | — | — | — |
| 3 | NC | — | — | — | — | — | — | — | — |
| 4 | NC | — | — | — | — | — | — | — | — |
| 5 | NC | — | — | — | — | — | — | — | — |
| 6 | NC | — | — | — | — | — | — | — | — |
| 7 | NC | — | — | — | — | — | — | — | — |
| 8 | NC | — | — | — | — | — | — | — | — |
| 9 | NC | — | — | — | — | — | — | — | — |
| 10 | NC | — | — | — | — | — | — | — | — |
| 11 | NC | — | — | — | — | — | — | — | — |
| 12 | NC | — | — | — | — | — | — | — | — |
| 13 | NC | — | — | — | — | — | — | — | — |
| 14 | NC | — | — | — | — | — | — | — | — |
| 15 | NC | — | — | — | — | — | — | — | — |
| 16 | NC | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W20 | — | 0.5 | MAXXECUPRO-C3-J2 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-C-18 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-C-30 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-C-31 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-C-7 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | MAXXECUPRO-C1-H1 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | MAXXECUPRO-C1-H2 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | MAXXECUPRO-C3-J3 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | OEM-C-9 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | OEM-C-21 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-B-1 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-B-9 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MAXXECUPRO-C1-M4 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | MAXXECUPRO-C3-M4 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-B-10 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-B-2 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-B-20 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-B-22 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | MAXXECUPRO-C1-L4 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | MAXXECUPRO-C2-H1 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | MAXXECUPRO-C2-H2 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | MAXXECUPRO-C2-H3 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | MAXXECUPRO-C3-L4 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Coolant temp gauge drive | low_side_out | MAXXECUPRO-C1-C1 | GPO 7 | low_side_out | corroborated | |
| OEM-A-10 | Service check signal | — | — | — | — | single_source | |
| OEM-A-11 | NC | — | — | — | — | unverified | |
| OEM-A-12 | Immobilizer indicator light | low_side_out | MAXXECUPRO-C1-A4 | GPO 8/TACHO | low_side_out | single_source | |
| OEM-A-13 | Immobilizer enable signal | — | — | — | — | single_source | |
| OEM-A-14 | NC | — | — | — | — | unverified | |
| OEM-A-15 | Fuel pump relay (USDM) | low_side_out | MAXXECUPRO-C1-B4 | GPO 1 | low_side_out | corroborated | |
| OEM-A-16 | Fuel pump relay (JDM) | low_side_out | MAXXECUPRO-C1-C4 | GPO 2 | low_side_out | single_source | |
| OEM-A-17 | A/C clutch relay | low_side_out | MAXXECUPRO-C1-D4 | GPO 3 | low_side_out | corroborated | |
| OEM-A-18 | Check engine light (MIL) | low_side_out | MAXXECUPRO-C4-G1 | GPO 23 | low_side_out | corroborated | |
| OEM-A-19 | Tacho output | tacho_out | MAXXECUPRO-C4-H3 | GPO 29 | low_side_out | corroborated | |
| OEM-A-2 | Air control valve solenoid | low_side_out | MAXXECUPRO-C4-G2 | GPO 24 | low_side_out | single_source | |
| OEM-A-20 | Radiator fan relay | low_side_out | MAXXECUPRO-C1-E4 | GPO 4 | low_side_out | corroborated | |
| OEM-A-21 | K-Line | serial | — | — | — | single_source | |
| OEM-A-22 | NC | — | — | — | — | unverified | |
| OEM-A-23 | Secondary O2 sensor | lambda_nb_in | MAXXECUPRO-C1-J4 | AIN 4 (0-5V) | analog_in | single_source | |
| OEM-A-24 | Starter switch signal | digital_in | MAXXECUPRO-C3-A3 | DIN 6 (SWITCH) | digital_in | corroborated | |
| OEM-A-25 | Immobilizer code | — | — | — | — | single_source | |
| OEM-A-26 | Power steering load detect | digital_in | MAXXECUPRO-C3-A1 | DIN/VR 4 | digital_in | corroborated | |
| OEM-A-27 | A/C switch (request) | digital_in | MAXXECUPRO-C3-A4 | DIN 7 (SWITCH) | digital_in | corroborated | |
| OEM-A-28 | Air pump relay | low_side_out | MAXXECUPRO-C1-A1 | GPO 5 | low_side_out | corroborated | |
| OEM-A-29 | Fuel tank pressure sensor | analog_in | MAXXECUPRO-C3-D2 | ANALOG IN 7 (0-5V) | analog_in | corroborated | |
| OEM-A-3 | Evap bypass solenoid | low_side_out | MAXXECUPRO-C4-G3 | GPO 25 | low_side_out | single_source | |
| OEM-A-30 | Electrical load detector | analog_in | MAXXECUPRO-C3-D3 | ANALOG IN 8 (0-5V) | analog_in | corroborated | |
| OEM-A-31 | NC | — | — | — | — | unverified | |
| OEM-A-32 | Brake switch | digital_in | MAXXECUPRO-C4-D3 | DIN 8 (switch) | digital_in | corroborated | |
| OEM-A-4 | Evap canister vent shut valve | low_side_out | MAXXECUPRO-C4-G4 | GPO 26 | low_side_out | single_source | |
| OEM-A-5 | NC | — | — | — | — | unverified | |
| OEM-A-6 | Evap canister purge valve | low_side_out | MAXXECUPRO-C4-H1 | GPO 27 | low_side_out | single_source | |
| OEM-A-7 | NC | — | — | — | — | unverified | |
| OEM-A-8 | NC | — | — | — | — | unverified | |
| OEM-A-9 | Vehicle speed sensor | digital_in | MAXXECUPRO-C1-K3 | DIN/VR 1 | digital_in | corroborated | |
| OEM-B-1 | Power source 1 (main relay) | power_in | MAXXECUPRO-C1-M4 + MAXXECUPRO-C3-M4 | +12V ECU power supply + 12V ECU 2 | power_in | corroborated | |
| OEM-B-10 | Power ground 2 | ground | MAXXECUPRO-C1-L4 + MAXXECUPRO-C2-H1 + MAXXECUPRO-C2-H2 + MAXXECUPRO-C2-H3 + MAXXECUPRO-C3-L4 | Engine GND + Engine ground 3 + Engine ground 3 + Engine ground 3 + ENGINE GROUND 2 | ground | single_source | |
| OEM-B-11 | Injector 1 | injector_out | MAXXECUPRO-C1-K1 | INJ 1 | injector_out | corroborated | |
| OEM-B-12 | VTEC solenoid | high_side_out | MAXXECUPRO-C3-G4 | GPO 15 (12V) | high_side_out | corroborated | |
| OEM-B-13 | NC | — | — | — | — | unverified | |
| OEM-B-14 | NC | — | — | — | — | unverified | |
| OEM-B-15 | NC | — | — | — | — | unverified | |
| OEM-B-16 | NC | — | — | — | — | unverified | |
| OEM-B-17 | NC | — | — | — | — | unverified | |
| OEM-B-18 | NC | — | — | — | — | unverified | |
| OEM-B-19 | NC | — | — | — | — | unverified | |
| OEM-B-2 | Power ground 1 | ground | MAXXECUPRO-C1-L4 + MAXXECUPRO-C2-H1 + MAXXECUPRO-C2-H2 + MAXXECUPRO-C2-H3 + MAXXECUPRO-C3-L4 | Engine GND + Engine ground 3 + Engine ground 3 + Engine ground 3 + ENGINE GROUND 2 | ground | corroborated | |
| OEM-B-20 | Ground | ground | MAXXECUPRO-C1-L4 + MAXXECUPRO-C2-H1 + MAXXECUPRO-C2-H2 + MAXXECUPRO-C2-H3 + MAXXECUPRO-C3-L4 | Engine GND + Engine ground 3 + Engine ground 3 + Engine ground 3 + ENGINE GROUND 2 | ground | single_source | |
| OEM-B-21 | Backup power (battery constant) | power_in | — | — | — | single_source | |
| OEM-B-22 | Ground | ground | MAXXECUPRO-C1-L4 + MAXXECUPRO-C2-H1 + MAXXECUPRO-C2-H2 + MAXXECUPRO-C2-H3 + MAXXECUPRO-C3-L4 | Engine GND + Engine ground 3 + Engine ground 3 + Engine ground 3 + ENGINE GROUND 2 | ground | single_source | |
| OEM-B-23 | Idle air control valve | low_side_out | MAXXECUPRO-C1-B1 | GPO 6 | low_side_out | corroborated | |
| OEM-B-24 | NC | — | — | — | — | unverified | |
| OEM-B-25 | NC | — | — | — | — | unverified | |
| OEM-B-3 | Injector 2 | injector_out | MAXXECUPRO-C1-K2 | INJ 2 | injector_out | corroborated | |
| OEM-B-4 | Injector 3 | injector_out | MAXXECUPRO-C1-M1 | INJ 3 | injector_out | corroborated | |
| OEM-B-5 | Injector 4 | injector_out | MAXXECUPRO-C1-M2 | INJ 4 | injector_out | corroborated | |
| OEM-B-6 | NC | — | — | — | — | unverified | |
| OEM-B-7 | NC | — | — | — | — | unverified | |
| OEM-B-8 | NC | — | — | — | — | unverified | |
| OEM-B-9 | Power source 2 (main relay) | power_in | MAXXECUPRO-C1-M4 + MAXXECUPRO-C3-M4 | +12V ECU power supply + 12V ECU 2 | power_in | corroborated | |
| OEM-C-1 | Primary O2 heater | low_side_out | MAXXECUPRO-C1-D1 | WBO2 Heater- | low_side_out | corroborated | |
| OEM-C-10 | VTEC pressure switch | digital_in | MAXXECUPRO-C4-D4 | DIN 9 (switch) | digital_in | corroborated | |
| OEM-C-11 | Secondary O2 heater control | low_side_out | MAXXECUPRO-C3-E1 | GPO 10/WBO2 2 HTR | low_side_out | single_source | |
| OEM-C-12 | Ignition coil 2 | ignition_out | MAXXECUPRO-C1-A3 | IGN 2 | ignition_out | corroborated | |
| OEM-C-13 | Ignition coil 3 | ignition_out | MAXXECUPRO-C1-B2 | IGN 3 | ignition_out | corroborated | |
| OEM-C-14 | Ignition coil 4 | ignition_out | MAXXECUPRO-C1-B3 | IGN 4 | ignition_out | corroborated | |
| OEM-C-15 | Secondary O2 sensor | lambda_nb_in | MAXXECUPRO-C3-C3 | ANALOG IN 5 (0-5V) | analog_in | corroborated | |
| OEM-C-16 | Primary O2 sensor | lambda_nb_in | MAXXECUPRO-C3-D1 | ANALOG IN 6 (0-5V) | analog_in | corroborated | |
| OEM-C-17 | MAP sensor | analog_in | MAXXECUPRO-C1-J3 | AIN 3 (0-5V) | analog_in | corroborated | |
| OEM-C-18 | Sensor ground 2 | sensor_ground | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-C-19 | Sensor 5V supply 1 (MAP) | vref | MAXXECUPRO-C1-G1 | +5V sensor supply | vref | corroborated | |
| OEM-C-2 | Alternator control | low_side_out | MAXXECUPRO-C4-H2 | GPO 28 | low_side_out | single_source | |
| OEM-C-20 | Cam (TDC1) sensor + | trigger_in | MAXXECUPRO-C1-H4 | HOME | trigger_in | corroborated | |
| OEM-C-21 | Cam (TDC1) sensor − | trigger_in | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-C-22 | Knock sensor | knock_in | — | — | — | conflict | |
| OEM-C-23 | NC | — | — | — | — | unverified | |
| OEM-C-24 | Air pump electric current sensor | analog_in | MAXXECUPRO-C3-E2 | ANALOG IN 9 (0-5V) | analog_in | single_source | |
| OEM-C-25 | Intake air temp sensor | temp_in | MAXXECUPRO-C1-J2 | AIN 2 (temperature) | temp_in | corroborated | |
| OEM-C-26 | Coolant temp sensor | temp_in | MAXXECUPRO-C1-J1 | AIN 1 (temperature) | temp_in | corroborated | |
| OEM-C-27 | Throttle position sensor | analog_in | MAXXECUPRO-C1-G2 | TPS/AIN | analog_in | corroborated | |
| OEM-C-28 | Sensor 5V supply 2 | vref | MAXXECUPRO-C3-C2 | +5V SENSOR SUPPLY 2 | vref | corroborated | |
| OEM-C-29 | Cam (TDC2) sensor + | trigger_in | — | — | — | corroborated | |
| OEM-C-3 | Knock sensor | knock_in | — | — | — | conflict | |
| OEM-C-30 | Cam (TDC2) sensor − | sensor_ground | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-C-31 | Timing ground | sensor_ground | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | single_source | |
| OEM-C-4 | Ignition coil 1 | ignition_out | MAXXECUPRO-C1-A2 | IGN 1 | ignition_out | corroborated | |
| OEM-C-5 | Alternator FR signal | digital_in | MAXXECUPRO-C1-K4 | DIN/VR 2 | digital_in | single_source | |
| OEM-C-6 | NC | — | — | — | — | unverified | |
| OEM-C-7 | Sensor ground 1 | sensor_ground | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-C-8 | Crank sensor + (CKP+) | trigger_in | MAXXECUPRO-C1-H3 | TRIGGER | trigger_in | corroborated | |
| OEM-C-9 | Crank sensor − (CKP−) | trigger_in | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-D-1 | NC | — | — | — | — | unverified | |
| OEM-D-10 | NC | — | — | — | — | unverified | |
| OEM-D-11 | NC | — | — | — | — | unverified | |
| OEM-D-12 | NC | — | — | — | — | unverified | |
| OEM-D-13 | NC | — | — | — | — | unverified | |
| OEM-D-14 | NC | — | — | — | — | unverified | |
| OEM-D-15 | NC | — | — | — | — | unverified | |
| OEM-D-16 | NC | — | — | — | — | unverified | |
| OEM-D-2 | NC | — | — | — | — | unverified | |
| OEM-D-3 | NC | — | — | — | — | unverified | |
| OEM-D-4 | NC | — | — | — | — | unverified | |
| OEM-D-5 | NC | — | — | — | — | unverified | |
| OEM-D-6 | NC | — | — | — | — | unverified | |
| OEM-D-7 | NC | — | — | — | — | unverified | |
| OEM-D-8 | NC | — | — | — | — | unverified | |
| OEM-D-9 | NC | — | — | — | — | unverified |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-B-1 | SP-14V-1 | 0.85 | no route | Power source 1 (main relay) | — | |
| W2 | OEM-B-9 | SP-14V-1 | 0.85 | no route | Power source 2 (main relay) | — | |
| W3 | SP-14V-1 | MAXXECUPRO-C1-M4 | 0.85 | no route | +12V ECU power supply | — | |
| W4 | SP-14V-1 | MAXXECUPRO-C3-M4 | 0.85 | no route | 12V ECU 2 | — | |
| W5 | OEM-B-10 | SP-GND-1 | 0.85 | no route | Power ground 2 | — | |
| W6 | OEM-B-2 | SP-GND-1 | 0.85 | no route | Power ground 1 | — | |
| W7 | OEM-B-20 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W8 | OEM-B-22 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W9 | SP-GND-1 | MAXXECUPRO-C1-L4 | 0.85 | no route | Engine GND | — | |
| W10 | SP-GND-1 | MAXXECUPRO-C2-H1 | 0.85 | no route | Engine ground 3 | — | |
| W11 | SP-GND-1 | MAXXECUPRO-C2-H2 | 0.85 | no route | Engine ground 3 | — | |
| W12 | SP-GND-1 | MAXXECUPRO-C2-H3 | 0.85 | no route | Engine ground 3 | — | |
| W13 | SP-GND-1 | MAXXECUPRO-C3-L4 | 0.85 | no route | ENGINE GROUND 2 | — | |
| W14 | OEM-C-18 | SP-0V-1 | 0.5 | no route | Sensor ground 2 | — | |
| W15 | OEM-C-30 | SP-0V-1 | 0.5 | no route | Cam (TDC2) sensor − | — | |
| W16 | OEM-C-31 | SP-0V-1 | 0.5 | no route | Timing ground | — | |
| W17 | OEM-C-7 | SP-0V-1 | 0.5 | no route | Sensor ground 1 | — | |
| W18 | SP-0V-1 | MAXXECUPRO-C1-H1 | 0.5 | no route | Sensor GND | — | |
| W19 | SP-0V-1 | MAXXECUPRO-C1-H2 | 0.5 | no route | Trigger GND | — | |
| W20 | SP-0V-1 | MAXXECUPRO-C3-J2 | 0.5 | no route | SENSOR GND | — | |
| W21 | SP-0V-1 | MAXXECUPRO-C3-J3 | 0.5 | no route | SENSOR GND | — | |
| W22 | OEM-C-19 | MAXXECUPRO-C1-G1 | 0.5 | no route | Sensor 5V supply 1 (MAP) | — | |
| W23 | OEM-C-28 | MAXXECUPRO-C3-C2 | 0.5 | no route | Sensor 5V supply 2 | — | |
| W24 | OEM-C-8 | MAXXECUPRO-C1-H3 | 0.5 | no route | Crank sensor + (CKP+) | — | |
| W25 | OEM-C-9 | SP-0V-1 | 0.5 | no route | Crank sensor − (CKP−) | — | |
| W26 | OEM-C-20 | MAXXECUPRO-C1-H4 | 0.5 | no route | Cam (TDC1) sensor + | — | |
| W27 | OEM-C-21 | SP-0V-1 | 0.5 | no route | Cam (TDC1) sensor − | — | |
| W28 | OEM-C-4 | MAXXECUPRO-C1-A2 | 0.5 | no route | Ignition coil 1 | — | |
| W29 | OEM-C-12 | MAXXECUPRO-C1-A3 | 0.5 | no route | Ignition coil 2 | — | |
| W30 | OEM-C-13 | MAXXECUPRO-C1-B2 | 0.5 | no route | Ignition coil 3 | — | |
| W31 | OEM-C-14 | MAXXECUPRO-C1-B3 | 0.5 | no route | Ignition coil 4 | — | |
| W32 | OEM-B-11 | MAXXECUPRO-C1-K1 | 0.5 | no route | Injector 1 | — | |
| W33 | OEM-B-3 | MAXXECUPRO-C1-K2 | 0.5 | no route | Injector 2 | — | |
| W34 | OEM-B-4 | MAXXECUPRO-C1-M1 | 0.5 | no route | Injector 3 | — | |
| W35 | OEM-B-5 | MAXXECUPRO-C1-M2 | 0.5 | no route | Injector 4 | — | |
| W36 | OEM-A-15 | MAXXECUPRO-C1-B4 | 0.5 | no route | Fuel pump relay (USDM) | — | |
| W37 | OEM-A-16 | MAXXECUPRO-C1-C4 | 0.5 | no route | Fuel pump relay (JDM) | — | |
| W38 | OEM-A-17 | MAXXECUPRO-C1-D4 | 0.5 | no route | A/C clutch relay | — | |
| W39 | OEM-A-20 | MAXXECUPRO-C1-E4 | 0.5 | no route | Radiator fan relay | — | |
| W40 | OEM-A-28 | MAXXECUPRO-C1-A1 | 0.5 | no route | Air pump relay | — | |
| W41 | OEM-B-12 | MAXXECUPRO-C3-G4 | 0.5 | no route | VTEC solenoid | — | |
| W42 | OEM-C-1 | MAXXECUPRO-C1-D1 | 0.5 | no route | Primary O2 heater | — | |
| W43 | OEM-C-11 | MAXXECUPRO-C3-E1 | 0.5 | no route | Secondary O2 heater control | — | |
| W44 | OEM-B-23 | MAXXECUPRO-C1-B1 | 0.5 | no route | Idle air control valve | — | |
| W45 | OEM-A-1 | MAXXECUPRO-C1-C1 | 0.5 | no route | Coolant temp gauge drive | — | |
| W46 | OEM-A-12 | MAXXECUPRO-C1-A4 | 0.5 | no route | Immobilizer indicator light | — | |
| W47 | OEM-A-18 | MAXXECUPRO-C4-G1 | 0.5 | no route | Check engine light (MIL) | — | |
| W48 | OEM-A-2 | MAXXECUPRO-C4-G2 | 0.5 | no route | Air control valve solenoid | — | |
| W49 | OEM-A-3 | MAXXECUPRO-C4-G3 | 0.5 | no route | Evap bypass solenoid | — | |
| W50 | OEM-A-4 | MAXXECUPRO-C4-G4 | 0.5 | no route | Evap canister vent shut valve | — | |
| W51 | OEM-A-6 | MAXXECUPRO-C4-H1 | 0.5 | no route | Evap canister purge valve | — | |
| W52 | OEM-C-2 | MAXXECUPRO-C4-H2 | 0.5 | no route | Alternator control | — | |
| W53 | OEM-A-19 | MAXXECUPRO-C4-H3 | 0.5 | no route | Tacho output | — | |
| W54 | OEM-C-17 | MAXXECUPRO-C1-J3 | 0.5 | no route | MAP sensor | — | |
| W55 | OEM-C-27 | MAXXECUPRO-C1-G2 | 0.5 | no route | Throttle position sensor | — | |
| W56 | OEM-A-23 | MAXXECUPRO-C1-J4 | 0.5 | no route | Secondary O2 sensor | — | |
| W57 | OEM-C-15 | MAXXECUPRO-C3-C3 | 0.5 | no route | Secondary O2 sensor | — | |
| W58 | OEM-C-16 | MAXXECUPRO-C3-D1 | 0.5 | no route | Primary O2 sensor | — | |
| W59 | OEM-C-26 | MAXXECUPRO-C1-J1 | 0.5 | no route | Coolant temp sensor | — | |
| W60 | OEM-C-25 | MAXXECUPRO-C1-J2 | 0.5 | no route | Intake air temp sensor | — | |
| W61 | OEM-A-29 | MAXXECUPRO-C3-D2 | 0.5 | no route | Fuel tank pressure sensor | — | |
| W62 | OEM-A-30 | MAXXECUPRO-C3-D3 | 0.5 | no route | Electrical load detector | — | |
| W63 | OEM-C-24 | MAXXECUPRO-C3-E2 | 0.5 | no route | Air pump electric current sensor | — | |
| W64 | OEM-A-9 | MAXXECUPRO-C1-K3 | 0.5 | no route | Vehicle speed sensor | — | |
| W65 | OEM-C-5 | MAXXECUPRO-C1-K4 | 0.5 | no route | Alternator FR signal | — | |
| W66 | OEM-A-24 | MAXXECUPRO-C3-A3 | 0.5 | no route | Starter switch signal | — | |
| W67 | OEM-A-26 | MAXXECUPRO-C3-A1 | 0.5 | no route | Power steering load detect | — | |
| W68 | OEM-A-27 | MAXXECUPRO-C3-A4 | 0.5 | no route | A/C switch (request) | — | |
| W69 | OEM-A-32 | MAXXECUPRO-C4-D3 | 0.5 | no route | Brake switch | — | |
| W70 | OEM-C-10 | MAXXECUPRO-C4-D4 | 0.5 | no route | VTEC pressure switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 179679-6 | TE | S2000 2000–05 ECU harness plug B (25P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | 179680-5 | TE | S2000 2000–05 ECU harness plug C (31P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | 179681-6 | TE | S2000 2000–05 ECU harness plug A (32P, TE 040 Multi-Lock) | 1.000 | ea |
| connector | S2K-0005-ECU-D | Honda | S2000 2000–05 ECU plug D (P/N unknown) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (11)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | NET_MERGED | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 + OEM-C-18 + OEM-C-21 + OEM-C-30 + OEM-C-31 + OEM-C-7 + OEM-C-9 + SP-0V-1 | 2 different OEM functions share one net: OEM-C-21 Cam (TDC1) sensor −; OEM-C-9 Crank sensor − (CKP−) |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C1-A1 | MAXXECUPRO-C1-A1 "GPO 5" drives OEM-A-28 Air pump relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C1-B1 | MAXXECUPRO-C1-B1 "GPO 6" drives OEM-B-23 Idle air control valve (load 1.0 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C1-B4 | MAXXECUPRO-C1-B4 "GPO 1" drives OEM-A-15 Fuel pump relay (USDM) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C1-C4 | MAXXECUPRO-C1-C4 "GPO 2" drives OEM-A-16 Fuel pump relay (JDM) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C1-D4 | MAXXECUPRO-C1-D4 "GPO 3" drives OEM-A-17 A/C clutch relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C1-E4 | MAXXECUPRO-C1-E4 "GPO 4" drives OEM-A-20 Radiator fan relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C3-G4 | MAXXECUPRO-C3-G4 "GPO 15 (12V)" drives OEM-B-12 VTEC solenoid (load 1.0 A) but its current rating is unknown. Check the ECU manual. |
| info | NET_FAMILY | OEM-A-19 ↔ MAXXECUPRO-C4-H3 | OEM-A-19 "Tacho output" [tacho_out] is wired to MAXXECUPRO-C4-H3 "GPO 29" [low_side_out]. Tacho as a low-side output: check the tach needs a pull-up. |
| info | NET_FAMILY | OEM-C-18 ↔ OEM-C-21 | OEM-C-18 "Sensor ground 2" [sensor_ground] is wired to OEM-C-21 "Cam (TDC1) sensor −" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-A-10 Service check signal; OEM-A-13 Immobilizer enable signal; OEM-A-21 K-Line; OEM-A-25 Immobilizer code; OEM-B-21 Backup power (battery constant); OEM-C-22 Knock sensor; OEM-C-29 Cam (TDC2) sensor +; OEM-C-3 Knock sensor |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-04. Review every wire against both manuals before building. Not wired: - OEM-B 21: Backup power (battery constant): MaxxECU MaxxECU PRO has no battery-constant input; not needed - OEM-C 29: Cam (TDC2) sensor +: no free cam_vr/cam_hall/frequency_in input on MaxxECU MaxxECU PRO - OEM-C 3: Knock sensor: 2 stock pins named "Knock sensor" without a documented polarity / pairing; wire by hand - OEM-C 22: Knock sensor: 2 stock pins named "Knock sensor" without a documented polarity / pairing; wire by hand - OEM-A 21: K-Line: no free k_line on MaxxECU MaxxECU PRO - OEM-A 10: Service check signal: not classified in the library; wire by hand - OEM-A 13: Immobilizer enable signal: not classified in the library; wire by hand - OEM-A 25: Immobilizer code: not classified in the library; wire by hand - MAXXECUPRO-C3 K3: KEY IN 12V: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL |
|---|---|---|---|
| 4 | vendor_doc | AEM 30-6052 Series 2 Plug & Play EMS, 2000–2005 S2000 (original ECU pinout) | https://documents.aemelectronics.com/techlibrary_30-6052_series_2_plug___play_ems.pdf |
| 4 | vendor_doc | Haltech KB: F20C (AP1) engine | https://support.haltech.com/portal/en/kb/articles/f20c-ap1-engine |
| 4 | vendor_doc | Link S2000 AP1 PlugIn installation manual | https://linkecu.com/documentation/S2000X.pdf |
| 4 | vendor_doc | MaxxECU GEN1 pinout (MINI / STREET / SPORT / V1 / RACE / PRO) | http://www.maxxecu.com/webhelp/wirings-maxxecu_pinout.html |
| 2 | forum | AllPinouts: 2000–2005 Honda S2000 ECU | https://allpinouts.org/pinouts/connectors/car/2000-2005-honda-s2000-ecu/ |
| 2 | forum | Autodata blog: ECU Pinout Honda S2000 2000-2004 | http://autodatas.blogspot.com/2012/11/ecu-pinout-honda-s2000-2000-2004.html |
| 2 | derived | Typical load estimates (relay coil ~0.2 A, high-Z injector ~1.2 A, VVT solenoid ~1 A) | — |