MX-5 Miata NA6 1990-93 (B6-ZE, 1.6) → rusEFI Proteus (auto)
MX-5 Miata NA6 1990-93 (B6-ZE, 1.6) — rusEFI — Proteus
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-05
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Constant +12V | — | — | — | — | — | — | — | — |
| B | ECU power +14V (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| C | Start signal | — | W40 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| E | Malfunction indicator lamp (MIL) | — | W34 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| G | Ignition 1 (coils 1+4, wasted spark) | — | W28 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| H | Ignition 2 (coils 2+3, wasted spark) | — | W29 | — | 0.5 | PROTEUS-Black35-34 | — | — | — |
| N | Wide-open throttle switch | — | W41 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
| P | Power steering pressure switch | — | W42 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
| Q | A/C request | — | W43 | — | 0.5 | PROTEUS-Black23-11 | — | — | — |
| V | Neutral/clutch switch | — | W44 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
OEM-2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| B | Power ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| C | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| D | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| E | Crank position (CAS NE) | — | W25 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| F | AFM ground | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| G | Cam position (CAS G) | — | W27 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| I | Tachometer output | — | W35 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| K | +5V sensor supply | — | W24 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
| L | Idle switch (TPS) | — | W45 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| N | O2 sensor | — | W37 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| O | Air flow meter (AFM) | — | W36 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
| P | Intake air temperature (IAT) | — | W39 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| Q | Coolant temperature (ECT) | — | W38 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| U | Injector 1 | — | W30 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| V | Injector 2 | — | W31 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
| Y | Injector 3 | — | W32 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| Z | Injector 4 | — | W33 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W27 | — | 0.5 | OEM-2-G | — | — | — |
| 10 | Digital 1 | — | W40 | — | 0.5 | OEM-1-C | — | — | — |
| 11 | Digital 6 | — | W43 | — | 0.5 | OEM-1-Q | — | — | — |
| 12 | VR 2 negative | — | — | — | — | — | — | — | — |
| 13 | VR 1 negative | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | — | — | — | — | — | — | — |
| 16 | CAN 1 Low | — | — | — | — | — | — | — | — |
| 17 | CAN 1 High | — | — | — | — | — | — | — | — |
| 18 | Ignition switch in | — | — | — | — | — | — | — | — |
| 19 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W44 | — | 0.5 | OEM-1-V | — | — | — |
| 20 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W41 | — | 0.5 | OEM-1-N | — | — | — |
| 4 | VR 2 positive | — | — | — | — | — | — | — | — |
| 5 | VR 1 positive | — | W25 | — | 0.5 | OEM-2-E | — | — | — |
| 6 | ETB 1 negative | — | — | — | — | — | — | — | — |
| 7 | ETB 1 positive | — | — | — | — | — | — | — | — |
| 8 | ETB 2 negative | — | — | — | — | — | — | — | — |
| 9 | Digital 5 | — | W42 | — | 0.5 | OEM-1-P | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | — | — | — | — | — | — | — |
| 11 | Lowside 14 | — | — | — | — | — | — | — | — |
| 12 | Lowside 15 | — | — | — | — | — | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W31 | — | 0.5 | OEM-2-V | — | — | — |
| 16 | Injector 4 | — | W33 | — | 0.5 | OEM-2-Z | — | — | — |
| 17 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | — | — | — | — | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W34 | — | 0.5 | OEM-1-E | — | — | — |
| 21 | Lowside 12 | — | — | — | — | — | — | — | — |
| 22 | Ignition 3 | — | — | — | — | — | — | — | — |
| 23 | Lowside 16 | — | — | — | — | — | — | — | — |
| 24 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | — | — | — | — | — | — | — |
| 3 | Injector 1 | — | W30 | — | 0.5 | OEM-2-U | — | — | — |
| 30 | Ignition 7 | — | — | — | — | — | — | — | — |
| 31 | Ignition 6 | — | — | — | — | — | — | — | — |
| 32 | Ignition 5 | — | — | — | — | — | — | — | — |
| 33 | Ignition 4 | — | — | — | — | — | — | — | — |
| 34 | Ignition 2 | — | W29 | — | 0.5 | OEM-1-H | — | — | — |
| 35 | Ignition 1 | — | W28 | — | 0.5 | OEM-1-G | — | — | — |
| 4 | Injector 3 | — | W32 | — | 0.5 | OEM-2-Y | — | — | — |
| 5 | Injector 5 | — | — | — | — | — | — | — | — |
| 6 | Injector 6 | — | — | — | — | — | — | — | — |
| 7 | Injector 7 | — | — | — | — | — | — | — | — |
| 8 | Injector 9 | — | — | — | — | — | — | — | — |
| 9 | Lowside 11 | — | W35 | — | 0.5 | OEM-2-I | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W24 | — | 0.5 | OEM-2-K | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W36 | — | 0.5 | OEM-2-O | — | — | — |
| 14 | Analog Volt 3 | — | W45 | — | 0.5 | OEM-2-L | — | — | — |
| 15 | Analog Volt 5 | — | — | — | — | — | — | — | — |
| 16 | Analog Volt 7 | — | — | — | — | — | — | — | — |
| 17 | Analog Volt 9 | — | — | — | — | — | — | — | — |
| 18 | Analog Volt 11 | — | — | — | — | — | — | — | — |
| 19 | Thermistor 1 | — | — | — | — | — | — | — | — |
| 2 | Sensor ground | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W38 | — | 0.5 | OEM-2-Q | — | — | — |
| 21 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 22 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 23 | Sensor ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W37 | — | 0.5 | OEM-2-N | — | — | — |
| 25 | Analog Volt 4 | — | — | — | — | — | — | — | — |
| 26 | Analog Volt 6 | — | — | — | — | — | — | — | — |
| 27 | Analog Volt 8 | — | — | — | — | — | — | — | — |
| 28 | Analog Volt 10 | — | — | — | — | — | — | — | — |
| 29 | Sensor ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W39 | — | 0.5 | OEM-2-P | — | — | — |
| 31 | Thermistor 4 | — | — | — | — | — | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | — | — | — | — | — | — | — |
| 35 | Knock 2 | — | — | — | — | — | — | — | — |
| 4 | Sensor ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | OEM-2-F | — | — | — |
| 1 | — | — | W14 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-1-B | — | — | — |
| 1 | — | — | W2 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W3 | — | 0.85 | OEM-2-A | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-2-B | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-2-C | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-2-D | — | — | — |
| 1 | — | — | W7 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-1-A | Constant +12V | power_in | — | — | — | single_source | |
| OEM-1-B | ECU power +14V (main relay) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-1-C | Start signal | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | single_source | |
| OEM-1-E | Malfunction indicator lamp (MIL) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | single_source | |
| OEM-1-G | Ignition 1 (coils 1+4, wasted spark) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | single_source | |
| OEM-1-H | Ignition 2 (coils 2+3, wasted spark) | ignition_out | PROTEUS-Black35-34 | Ignition 2 | ignition_out | single_source | |
| OEM-1-N | Wide-open throttle switch | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | single_source | |
| OEM-1-P | Power steering pressure switch | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | single_source | |
| OEM-1-Q | A/C request | digital_in | PROTEUS-Black23-11 | Digital 6 | digital_in | single_source | |
| OEM-1-V | Neutral/clutch switch | digital_in | PROTEUS-Black23-2 | Digital 3 | digital_in | single_source | |
| OEM-2-A | Power ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-2-B | Power ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-2-C | Power ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-2-D | Power ground | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-2-E | Crank position (CAS NE) | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | single_source | |
| OEM-2-F | AFM ground | sensor_ground | PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-2-G | Cam position (CAS G) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | single_source | |
| OEM-2-I | Tachometer output | tacho_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | single_source | |
| OEM-2-K | +5V sensor supply | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-2-L | Idle switch (TPS) | digital_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | single_source | |
| OEM-2-N | O2 sensor | lambda_nb_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | single_source | |
| OEM-2-O | Air flow meter (AFM) | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | single_source | |
| OEM-2-P | Intake air temperature (IAT) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | single_source | |
| OEM-2-Q | Coolant temperature (ECT) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | single_source | |
| OEM-2-U | Injector 1 | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | single_source | |
| OEM-2-V | Injector 2 | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | single_source | |
| OEM-2-Y | Injector 3 | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | single_source | |
| OEM-2-Z | Injector 4 | injector_out | PROTEUS-Black35-16 | Injector 4 | injector_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-1-B | SP-14V-1 | 0.85 | no route | ECU power +14V (main relay) | — | |
| W2 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W3 | OEM-2-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W4 | OEM-2-B | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W5 | OEM-2-C | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-2-D | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W8 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W9 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W10 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W12 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W13 | OEM-2-F | SP-0V-1 | 0.5 | no route | AFM ground | — | |
| W14 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W15 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W16 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W17 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W18 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W19 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W20 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W21 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W22 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W23 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W24 | OEM-2-K | PROTEUS-White35-10 | 0.5 | no route | +5V sensor supply | — | |
| W25 | OEM-2-E | PROTEUS-Black23-5 | 0.5 | no route | Crank position (CAS NE) | — | |
| W26 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | no route | VR 1 negative | — | |
| W27 | OEM-2-G | PROTEUS-Black23-1 | 0.5 | no route | Cam position (CAS G) | — | |
| W28 | OEM-1-G | PROTEUS-Black35-35 | 0.5 | no route | Ignition 1 (coils 1+4, wasted spark) | — | |
| W29 | OEM-1-H | PROTEUS-Black35-34 | 0.5 | no route | Ignition 2 (coils 2+3, wasted spark) | — | |
| W30 | OEM-2-U | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 | — | |
| W31 | OEM-2-V | PROTEUS-Black35-15 | 0.5 | no route | Injector 2 | — | |
| W32 | OEM-2-Y | PROTEUS-Black35-4 | 0.5 | no route | Injector 3 | — | |
| W33 | OEM-2-Z | PROTEUS-Black35-16 | 0.5 | no route | Injector 4 | — | |
| W34 | OEM-1-E | PROTEUS-Black35-20 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W35 | OEM-2-I | PROTEUS-Black35-9 | 0.5 | no route | Tachometer output | — | |
| W36 | OEM-2-O | PROTEUS-White35-13 | 0.5 | no route | Air flow meter (AFM) | — | |
| W37 | OEM-2-N | PROTEUS-White35-24 | 0.5 | no route | O2 sensor | — | |
| W38 | OEM-2-Q | PROTEUS-White35-20 | 0.5 | no route | Coolant temperature (ECT) | — | |
| W39 | OEM-2-P | PROTEUS-White35-30 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W40 | OEM-1-C | PROTEUS-Black23-10 | 0.5 | no route | Start signal | — | |
| W41 | OEM-1-N | PROTEUS-Black23-3 | 0.5 | no route | Wide-open throttle switch | — | |
| W42 | OEM-1-P | PROTEUS-Black23-9 | 0.5 | no route | Power steering pressure switch | — | |
| W43 | OEM-1-Q | PROTEUS-Black23-11 | 0.5 | no route | A/C request | — | |
| W44 | OEM-1-V | PROTEUS-Black23-2 | 0.5 | no route | Neutral/clutch switch | — | |
| W45 | OEM-2-L | PROTEUS-White35-14 | 0.5 | no route | Idle switch (TPS) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (3)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-2-L ↔ PROTEUS-White35-14 | OEM-2-L "Idle switch (TPS)" [digital_in] is wired to PROTEUS-White35-14 "Analog Volt 3" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-2-I ↔ PROTEUS-Black35-9 | OEM-2-I "Tachometer output" [tacho_out] is wired to PROTEUS-Black35-9 "Lowside 11" [low_side_out]. Tacho as a low-side output: check the tach needs a pull-up. |
| info | NET_FAMILY | PROTEUS-White35-1 ↔ PROTEUS-Black23-13 | PROTEUS-White35-1 "Sensor ground" [sensor_ground] is wired to PROTEUS-Black23-13 "VR 1 negative" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-1-A | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-04. Review every wire against both manuals before building. Not wired: - OEM-1 A: Constant +12V: rusEFI Proteus has no battery-constant input; not needed - PROTEUS-Black23 18: Ignition switch in: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL |
|---|---|---|---|
| 4 | vendor_doc | Link G4X MX5X install manual (NA 1.6/1.8) | https://linkecu.com/documentation/MX5X.pdf |
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors |