MX-5 Miata NB2 2001-05 (BP-Z3, VVT) → MoTeC M130 13130 (auto)
MX-5 Miata NB2 2001-05 (BP-Z3, VVT) — MoTeC — M130
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-05
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
M130-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Half Bridge Output 2 | — | W29 | — | 0.5 | OEM-3-P | — | — | — |
| 10 | Battery Negative 1 | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | Battery Negative 2 | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | Low Side Ignition 7 | — | — | — | — | — | — | — | — |
| 13 | Low Side Ignition 8 | — | — | — | — | — | — | — | — |
| 14 | Analogue Voltage Input 1 | — | W35 | — | 0.5 | OEM-4-X | — | — | — |
| 15 | Analogue Voltage Input 2 | — | W36 | — | 0.5 | OEM-4-V | — | — | — |
| 16 | Analogue Voltage Input 3 | — | W37 | — | 0.5 | OEM-4-AA | — | — | — |
| 17 | Analogue Voltage Input 4 | — | W38 | — | 0.5 | OEM-4-W | — | — | — |
| 18 | Half Bridge Output 1 | — | W28 | — | 0.5 | OEM-3-J | — | — | — |
| 19 | Peak Hold Injector 1 | — | W19 | — | 0.5 | OEM-2-A | — | — | — |
| 2 | Sensor 5.0V A | — | W13 | — | 0.5 | OEM-4-L | — | — | — |
| 20 | Peak Hold Injector 2 | — | W21 | — | 0.5 | OEM-2-G | — | — | — |
| 21 | Peak Hold Injector 3 | — | W23 | — | 0.5 | OEM-2-B | — | — | — |
| 22 | Peak Hold Injector 4 | — | W24 | — | 0.5 | OEM-2-C | — | — | — |
| 23 | Low Side Injector 1 | — | W20 | — | 0.5 | OEM-2-D | — | — | — |
| 24 | Low Side Injector 2 | — | W22 | — | 0.5 | OEM-2-J | — | — | — |
| 25 | Analogue Voltage Input 5 | — | W41 | — | 0.5 | OEM-4-AD | — | — | — |
| 26 | Battery Positive | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | Peak Hold Injector 5 | — | W25 | — | 0.5 | OEM-2-K | — | — | — |
| 28 | Peak Hold Injector 6 | — | W26 | — | 0.5 | OEM-2-M | — | — | — |
| 29 | Peak Hold Injector 7 | — | W27 | — | 0.5 | OEM-3-H | — | — | — |
| 3 | Low Side Ignition 1 | — | W17 | — | 0.5 | OEM-3-F | — | — | — |
| 30 | Peak Hold Injector 8 | — | W30 | — | 0.5 | OEM-2-Q | — | — | — |
| 31 | Half Bridge Output 3 | — | W31 | — | 0.5 | OEM-2-E | — | — | — |
| 32 | Half Bridge Output 4 | — | W32 | — | 0.5 | OEM-2-F | — | — | — |
| 33 | Half Bridge Output 5 | — | W33 | — | 0.5 | OEM-2-H | — | — | — |
| 34 | Half Bridge Output 6 | — | W34 | — | 0.5 | OEM-2-I | — | — | — |
| 4 | Low Side Ignition 2 | — | W18 | — | 0.5 | OEM-3-I | — | — | — |
| 5 | Low Side Ignition 3 | — | — | — | — | — | — | — | — |
| 6 | Low Side Ignition 4 | — | — | — | — | — | — | — | — |
| 7 | Low Side Ignition 5 | — | — | — | — | — | — | — | — |
| 8 | Low Side Ignition 6 | — | — | — | — | — | — | — | — |
| 9 | Sensor 5.0V B | — | — | — | — | — | — | — | — |
M130-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Universal Digital Input 1 | — | W14 | — | 0.5 | OEM-3-Y | — | — | — |
| 10 | Universal Digital Input 5 | — | W44 | — | 0.5 | OEM-4-B | — | — | — |
| 11 | Universal Digital Input 6 | — | W45 | — | 0.5 | OEM-4-C | — | — | — |
| 12 | Battery Backup | — | W4 | — | 0.85 | OEM-4-AG | — | — | — |
| 13 | Knock Input 2 | — | — | — | — | — | — | — | — |
| 14 | Universal Digital Input 7 | — | W46 | — | 0.5 | OEM-4-F | — | — | — |
| 15 | Sensor 0V A | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Sensor 0V B | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | CAN Bus 1 High | — | — | — | — | — | — | — | — |
| 18 | CAN Bus 1 Low | — | — | — | — | — | — | — | — |
| 19 | Sensor 6.3V | — | — | — | — | — | — | — | — |
| 2 | Universal Digital Input 2 | — | W15 | — | 0.5 | OEM-3-V | — | — | — |
| 20 | Analogue Voltage Input 6 | — | W47 | — | 0.5 | OEM-4-H | — | — | — |
| 21 | Analogue Voltage Input 7 | — | W48 | — | 0.5 | OEM-4-I | — | — | — |
| 22 | Analogue Voltage Input 8 | — | W49 | — | 0.5 | OEM-4-J | — | — | — |
| 23 | Ethernet Transmit + | — | — | — | — | — | — | — | — |
| 24 | Ethernet Transmit - | — | — | — | — | — | — | — | — |
| 25 | Ethernet Receive + | — | — | — | — | — | — | — | — |
| 26 | Ethernet Receive - | — | — | — | — | — | — | — | — |
| 3 | Analogue Temperature Input 1 | — | W39 | — | 0.5 | OEM-4-P | — | — | — |
| 4 | Analogue Temperature Input 2 | — | W40 | — | 0.5 | OEM-4-N | — | — | — |
| 5 | Analogue Temperature Input 3 | — | — | — | — | — | — | — | — |
| 6 | Analogue Temperature Input 4 | — | — | — | — | — | — | — | — |
| 7 | Knock Input 1 | — | W16 | — | 0.5 | OEM-4-M | — | — | — |
| 8 | Universal Digital Input 3 | — | W42 | — | 0.5 | OEM-3-T | — | — | — |
| 9 | Universal Digital Input 4 | — | W43 | — | 0.5 | OEM-3-S | — | — | — |
OEM-2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Injector 1 | — | W19 | — | 0.5 | M130-A-19 | — | — | — |
| B | Cooling fan relay | — | W23 | — | 0.5 | M130-A-21 | — | — | — |
| C | Condenser fan relay | — | W24 | — | 0.5 | M130-A-22 | — | — | — |
| D | Injector 2 | — | W20 | — | 0.5 | M130-A-23 | — | — | — |
| E | EGR valve | — | W31 | — | 0.5 | M130-A-31 | — | — | — |
| F | EGR valve | — | W32 | — | 0.5 | M130-A-32 | — | — | — |
| G | Injector 3 | — | W21 | — | 0.5 | M130-A-20 | — | — | — |
| H | EGR valve | — | W33 | — | 0.5 | M130-A-33 | — | — | — |
| I | EGR valve | — | W34 | — | 0.5 | M130-A-34 | — | — | — |
| J | Injector 4 | — | W22 | — | 0.5 | M130-A-24 | — | — | — |
| K | A/C clutch relay | — | W25 | — | 0.5 | M130-A-27 | — | — | — |
| M | Fuel pump relay | — | W26 | — | 0.5 | M130-A-28 | — | — | — |
| N | VTCS solenoid (intake butterflies) | — | — | — | — | — | — | — | — |
| P | ISC valve +14V feed | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| Q | ISC valve low side | — | W30 | — | 0.5 | M130-A-30 | — | — | — |
| R | Malfunction indicator lamp (MIL) | — | — | — | — | — | — | — | — |
OEM-3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| B | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| D | EGR boost solenoid | — | — | — | — | — | — | — | — |
| E | Charcoal canister purge | — | — | — | — | — | — | — | — |
| F | Ignition 1 (coils 1+4, wasted spark) | — | W17 | — | 0.5 | M130-A-3 | — | — | — |
| H | Main relay | — | W27 | — | 0.5 | M130-A-29 | — | — | — |
| I | Ignition 2 (coils 2+3, wasted spark) | — | W18 | — | 0.5 | M130-A-4 | — | — | — |
| J | Front O2 heater | — | W28 | — | 0.5 | M130-A-18 | — | — | — |
| M | Alternator control | — | — | — | — | — | — | — | — |
| O | Tachometer output | — | — | — | — | — | — | — | — |
| P | Rear O2 heater | — | W29 | — | 0.5 | M130-A-1 | — | — | — |
| S | Immobiliser | — | W43 | — | 0.5 | M130-B-9 | — | — | — |
| T | Vehicle speed | — | W42 | — | 0.5 | M130-B-8 | — | — | — |
| U | Charge lamp | — | — | — | — | — | — | — | — |
| V | Cam position (CMP) | — | W15 | — | 0.5 | M130-B-2 | — | — | — |
| Y | Crank position (CKP) | — | W14 | — | 0.5 | M130-B-1 | — | — | — |
OEM-4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| AA | Rear O2 signal | — | W37 | — | 0.5 | M130-A-16 | — | — | — |
| AD | Fuel level | — | W41 | — | 0.5 | M130-A-25 | — | — | — |
| AF | ECU power +14V (main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| AG | Constant +12V | — | W4 | — | 0.85 | M130-B-12 | — | — | — |
| B | Brake switch | — | W44 | — | 0.5 | M130-B-10 | — | — | — |
| C | Power steering pressure switch | — | W45 | — | 0.5 | M130-B-11 | — | — | — |
| D | VVT oil-control solenoid | — | — | — | — | — | — | — | — |
| F | A/C request | — | W46 | — | 0.5 | M130-B-14 | — | — | — |
| H | Neutral switch | — | W47 | — | 0.5 | M130-B-20 | — | — | — |
| I | Clutch switch | — | W48 | — | 0.5 | M130-B-21 | — | — | — |
| J | VTCS vacuum switch | — | W49 | — | 0.5 | M130-B-22 | — | — | — |
| L | +5V sensor supply | — | W13 | — | 0.5 | M130-A-2 | — | — | — |
| M | Knock sensor | — | W16 | — | 0.5 | M130-B-7 | — | — | — |
| N | Intake air temperature (IAT) | — | W40 | — | 0.5 | M130-B-4 | — | — | — |
| O | Signal ground | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| P | Coolant temperature (ECT) | — | W39 | — | 0.5 | M130-B-3 | — | — | — |
| V | Throttle position (TPS) | — | W36 | — | 0.5 | M130-A-15 | — | — | — |
| W | Front O2 signal | — | W38 | — | 0.5 | M130-A-17 | — | — | — |
| X | Mass air flow (MAF) | — | W35 | — | 0.5 | M130-A-14 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.5 | OEM-4-O | — | — | — |
| 1 | — | — | W11 | — | 0.5 | M130-B-15 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | M130-B-16 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-2-P | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-4-AF | — | — | — |
| 1 | — | — | W3 | — | 0.85 | M130-A-26 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-3-A | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-3-B | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-4-A | — | — | — |
| 1 | — | — | W8 | — | 0.85 | M130-A-10 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | M130-A-11 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-2-A | Injector 1 | injector_out | M130-A-19 | Peak Hold Injector 1 | injector_out | single_source | |
| OEM-2-B | Cooling fan relay | low_side_out | M130-A-21 | Peak Hold Injector 3 | injector_out | single_source | |
| OEM-2-C | Condenser fan relay | low_side_out | M130-A-22 | Peak Hold Injector 4 | injector_out | single_source | |
| OEM-2-D | Injector 2 | injector_out | M130-A-23 | Low Side Injector 1 | injector_out | single_source | |
| OEM-2-E | EGR valve | low_side_out | M130-A-31 | Half Bridge Output 3 | hbridge_out | single_source | |
| OEM-2-F | EGR valve | low_side_out | M130-A-32 | Half Bridge Output 4 | hbridge_out | single_source | |
| OEM-2-G | Injector 3 | injector_out | M130-A-20 | Peak Hold Injector 2 | injector_out | single_source | |
| OEM-2-H | EGR valve | low_side_out | M130-A-33 | Half Bridge Output 5 | hbridge_out | single_source | |
| OEM-2-I | EGR valve | low_side_out | M130-A-34 | Half Bridge Output 6 | hbridge_out | single_source | |
| OEM-2-J | Injector 4 | injector_out | M130-A-24 | Low Side Injector 2 | injector_out | single_source | |
| OEM-2-K | A/C clutch relay | low_side_out | M130-A-27 | Peak Hold Injector 5 | injector_out | single_source | |
| OEM-2-M | Fuel pump relay | low_side_out | M130-A-28 | Peak Hold Injector 6 | injector_out | single_source | |
| OEM-2-N | VTCS solenoid (intake butterflies) | low_side_out | — | — | — | single_source | |
| OEM-2-P | ISC valve +14V feed | power_in | M130-A-26 | Battery Positive | power_in | single_source | |
| OEM-2-Q | ISC valve low side | low_side_out | M130-A-30 | Peak Hold Injector 8 | injector_out | single_source | |
| OEM-2-R | Malfunction indicator lamp (MIL) | low_side_out | — | — | — | single_source | |
| OEM-3-A | Power ground | ground | M130-A-10 + M130-A-11 | Battery Negative 1 + Battery Negative 2 | ground | single_source | |
| OEM-3-B | Power ground | ground | M130-A-10 + M130-A-11 | Battery Negative 1 + Battery Negative 2 | ground | single_source | |
| OEM-3-D | EGR boost solenoid | low_side_out | — | — | — | single_source | |
| OEM-3-E | Charcoal canister purge | low_side_out | — | — | — | single_source | |
| OEM-3-F | Ignition 1 (coils 1+4, wasted spark) | ignition_out | M130-A-3 | Low Side Ignition 1 | ignition_out | single_source | |
| OEM-3-H | Main relay | low_side_out | M130-A-29 | Peak Hold Injector 7 | injector_out | single_source | |
| OEM-3-I | Ignition 2 (coils 2+3, wasted spark) | ignition_out | M130-A-4 | Low Side Ignition 2 | ignition_out | single_source | |
| OEM-3-J | Front O2 heater | low_side_out | M130-A-18 | Half Bridge Output 1 | hbridge_out | single_source | |
| OEM-3-M | Alternator control | low_side_out | — | — | — | single_source | |
| OEM-3-O | Tachometer output | tacho_out | — | — | — | single_source | |
| OEM-3-P | Rear O2 heater | low_side_out | M130-A-1 | Half Bridge Output 2 | hbridge_out | single_source | |
| OEM-3-S | Immobiliser | digital_in | M130-B-9 | Universal Digital Input 4 | digital_in | single_source | |
| OEM-3-T | Vehicle speed | digital_in | M130-B-8 | Universal Digital Input 3 | digital_in | single_source | |
| OEM-3-U | Charge lamp | low_side_out | — | — | — | single_source | |
| OEM-3-V | Cam position (CMP) | trigger_in | M130-B-2 | Universal Digital Input 2 | digital_in | single_source | |
| OEM-3-Y | Crank position (CKP) | trigger_in | M130-B-1 | Universal Digital Input 1 | digital_in | single_source | |
| OEM-4-A | Power ground | ground | M130-A-10 + M130-A-11 | Battery Negative 1 + Battery Negative 2 | ground | single_source | |
| OEM-4-AA | Rear O2 signal | lambda_nb_in | M130-A-16 | Analogue Voltage Input 3 | analog_in | single_source | |
| OEM-4-AD | Fuel level | analog_in | M130-A-25 | Analogue Voltage Input 5 | analog_in | single_source | |
| OEM-4-AF | ECU power +14V (main relay) | power_in | M130-A-26 | Battery Positive | power_in | single_source | |
| OEM-4-AG | Constant +12V | power_in | M130-B-12 | Battery Backup | power_in | single_source | |
| OEM-4-B | Brake switch | digital_in | M130-B-10 | Universal Digital Input 5 | digital_in | single_source | |
| OEM-4-C | Power steering pressure switch | digital_in | M130-B-11 | Universal Digital Input 6 | digital_in | single_source | |
| OEM-4-D | VVT oil-control solenoid | low_side_out | — | — | — | single_source | |
| OEM-4-F | A/C request | digital_in | M130-B-14 | Universal Digital Input 7 | digital_in | single_source | |
| OEM-4-H | Neutral switch | digital_in | M130-B-20 | Analogue Voltage Input 6 | analog_in | single_source | |
| OEM-4-I | Clutch switch | digital_in | M130-B-21 | Analogue Voltage Input 7 | analog_in | single_source | |
| OEM-4-J | VTCS vacuum switch | digital_in | M130-B-22 | Analogue Voltage Input 8 | analog_in | single_source | |
| OEM-4-L | +5V sensor supply | vref | M130-A-2 | Sensor 5.0V A | vref | single_source | |
| OEM-4-M | Knock sensor | knock_in | M130-B-7 | Knock Input 1 | knock_in | single_source | |
| OEM-4-N | Intake air temperature (IAT) | temp_in | M130-B-4 | Analogue Temperature Input 2 | temp_in | single_source | |
| OEM-4-O | Signal ground | sensor_ground | M130-B-15 + M130-B-16 | Sensor 0V A + Sensor 0V B | sensor_ground | single_source | |
| OEM-4-P | Coolant temperature (ECT) | temp_in | M130-B-3 | Analogue Temperature Input 1 | temp_in | single_source | |
| OEM-4-V | Throttle position (TPS) | analog_in | M130-A-15 | Analogue Voltage Input 2 | analog_in | single_source | |
| OEM-4-W | Front O2 signal | lambda_nb_in | M130-A-17 | Analogue Voltage Input 4 | analog_in | single_source | |
| OEM-4-X | Mass air flow (MAF) | analog_in | M130-A-14 | Analogue Voltage Input 1 | analog_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-2-P | SP-14V-1 | 0.85 | no route | ISC valve +14V feed | — | |
| W2 | OEM-4-AF | SP-14V-1 | 0.85 | no route | ECU power +14V (main relay) | — | |
| W3 | SP-14V-1 | M130-A-26 | 0.85 | no route | Battery Positive | — | |
| W4 | OEM-4-AG | M130-B-12 | 0.85 | no route | Constant +12V | — | |
| W5 | OEM-3-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-3-B | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | OEM-4-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W8 | SP-GND-1 | M130-A-10 | 0.85 | no route | Battery Negative 1 | — | |
| W9 | SP-GND-1 | M130-A-11 | 0.85 | no route | Battery Negative 2 | — | |
| W10 | OEM-4-O | SP-0V-1 | 0.5 | no route | Signal ground | — | |
| W11 | SP-0V-1 | M130-B-15 | 0.5 | no route | Sensor 0V A | — | |
| W12 | SP-0V-1 | M130-B-16 | 0.5 | no route | Sensor 0V B | — | |
| W13 | OEM-4-L | M130-A-2 | 0.5 | no route | +5V sensor supply | — | |
| W14 | OEM-3-Y | M130-B-1 | 0.5 | no route | Crank position (CKP) | — | |
| W15 | OEM-3-V | M130-B-2 | 0.5 | no route | Cam position (CMP) | — | |
| W16 | OEM-4-M | M130-B-7 | 0.5 | no route | Knock sensor | — | |
| W17 | OEM-3-F | M130-A-3 | 0.5 | no route | Ignition 1 (coils 1+4, wasted spark) | — | |
| W18 | OEM-3-I | M130-A-4 | 0.5 | no route | Ignition 2 (coils 2+3, wasted spark) | — | |
| W19 | OEM-2-A | M130-A-19 | 0.5 | no route | Injector 1 | — | |
| W20 | OEM-2-D | M130-A-23 | 0.5 | no route | Injector 2 | — | |
| W21 | OEM-2-G | M130-A-20 | 0.5 | no route | Injector 3 | — | |
| W22 | OEM-2-J | M130-A-24 | 0.5 | no route | Injector 4 | — | |
| W23 | OEM-2-B | M130-A-21 | 0.5 | no route | Cooling fan relay | — | |
| W24 | OEM-2-C | M130-A-22 | 0.5 | no route | Condenser fan relay | — | |
| W25 | OEM-2-K | M130-A-27 | 0.5 | no route | A/C clutch relay | — | |
| W26 | OEM-2-M | M130-A-28 | 0.5 | no route | Fuel pump relay | — | |
| W27 | OEM-3-H | M130-A-29 | 0.5 | no route | Main relay | — | |
| W28 | OEM-3-J | M130-A-18 | 0.5 | no route | Front O2 heater | — | |
| W29 | OEM-3-P | M130-A-1 | 0.5 | no route | Rear O2 heater | — | |
| W30 | OEM-2-Q | M130-A-30 | 0.5 | no route | ISC valve low side | — | |
| W31 | OEM-2-E | M130-A-31 | 0.5 | no route | EGR valve | — | |
| W32 | OEM-2-F | M130-A-32 | 0.5 | no route | EGR valve | — | |
| W33 | OEM-2-H | M130-A-33 | 0.5 | no route | EGR valve | — | |
| W34 | OEM-2-I | M130-A-34 | 0.5 | no route | EGR valve | — | |
| W35 | OEM-4-X | M130-A-14 | 0.5 | no route | Mass air flow (MAF) | — | |
| W36 | OEM-4-V | M130-A-15 | 0.5 | no route | Throttle position (TPS) | — | |
| W37 | OEM-4-AA | M130-A-16 | 0.5 | no route | Rear O2 signal | — | |
| W38 | OEM-4-W | M130-A-17 | 0.5 | no route | Front O2 signal | — | |
| W39 | OEM-4-P | M130-B-3 | 0.5 | no route | Coolant temperature (ECT) | — | |
| W40 | OEM-4-N | M130-B-4 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W41 | OEM-4-AD | M130-A-25 | 0.5 | no route | Fuel level | — | |
| W42 | OEM-3-T | M130-B-8 | 0.5 | no route | Vehicle speed | — | |
| W43 | OEM-3-S | M130-B-9 | 0.5 | no route | Immobiliser | — | |
| W44 | OEM-4-B | M130-B-10 | 0.5 | no route | Brake switch | — | |
| W45 | OEM-4-C | M130-B-11 | 0.5 | no route | Power steering pressure switch | — | |
| W46 | OEM-4-F | M130-B-14 | 0.5 | no route | A/C request | — | |
| W47 | OEM-4-H | M130-B-20 | 0.5 | no route | Neutral switch | — | |
| W48 | OEM-4-I | M130-B-21 | 0.5 | no route | Clutch switch | — | |
| W49 | OEM-4-J | M130-B-22 | 0.5 | no route | VTCS vacuum switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (18)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-2-E ↔ M130-A-31 | OEM-2-E "EGR valve" [low_side_out] is wired to M130-A-31 "Half Bridge Output 3" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-2-F ↔ M130-A-32 | OEM-2-F "EGR valve" [low_side_out] is wired to M130-A-32 "Half Bridge Output 4" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-2-H ↔ M130-A-33 | OEM-2-H "EGR valve" [low_side_out] is wired to M130-A-33 "Half Bridge Output 5" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-2-I ↔ M130-A-34 | OEM-2-I "EGR valve" [low_side_out] is wired to M130-A-34 "Half Bridge Output 6" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-3-J ↔ M130-A-18 | OEM-3-J "Front O2 heater" [low_side_out] is wired to M130-A-18 "Half Bridge Output 1" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-3-P ↔ M130-A-1 | OEM-3-P "Rear O2 heater" [low_side_out] is wired to M130-A-1 "Half Bridge Output 2" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-3-V ↔ M130-B-2 | OEM-3-V "Cam position (CMP)" [trigger_in] is wired to M130-B-2 "Universal Digital Input 2" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-3-Y ↔ M130-B-1 | OEM-3-Y "Crank position (CKP)" [trigger_in] is wired to M130-B-1 "Universal Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-4-H ↔ M130-B-20 | OEM-4-H "Neutral switch" [digital_in] is wired to M130-B-20 "Analogue Voltage Input 6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-4-I ↔ M130-B-21 | OEM-4-I "Clutch switch" [digital_in] is wired to M130-B-21 "Analogue Voltage Input 7" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-4-J ↔ M130-B-22 | OEM-4-J "VTCS vacuum switch" [digital_in] is wired to M130-B-22 "Analogue Voltage Input 8" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-2-B ↔ M130-A-21 | OEM-2-B "Cooling fan relay" [low_side_out] is wired to M130-A-21 "Peak Hold Injector 3" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-C ↔ M130-A-22 | OEM-2-C "Condenser fan relay" [low_side_out] is wired to M130-A-22 "Peak Hold Injector 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-K ↔ M130-A-27 | OEM-2-K "A/C clutch relay" [low_side_out] is wired to M130-A-27 "Peak Hold Injector 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-M ↔ M130-A-28 | OEM-2-M "Fuel pump relay" [low_side_out] is wired to M130-A-28 "Peak Hold Injector 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-Q ↔ M130-A-30 | OEM-2-Q "ISC valve low side" [low_side_out] is wired to M130-A-30 "Peak Hold Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-3-H ↔ M130-A-29 | OEM-3-H "Main relay" [low_side_out] is wired to M130-A-29 "Peak Hold Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-2-N VTCS solenoid (intake butterflies); OEM-2-R Malfunction indicator lamp (MIL); OEM-3-D EGR boost solenoid; OEM-3-E Charcoal canister purge; OEM-3-M Alternator control; OEM-3-O Tachometer output; OEM-3-U Charge lamp; OEM-4-D VVT oil-control solenoid |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-04. Review every wire against both manuals before building. Not wired: - OEM-2 N: VTCS solenoid (intake butterflies): no free low_side/ls_hs/injector/hbridge on MoTeC M130 - OEM-2 R: Malfunction indicator lamp (MIL): no free low_side/ls_hs/injector/hbridge on MoTeC M130 - OEM-3 D: EGR boost solenoid: no free low_side/ls_hs/injector/hbridge on MoTeC M130 - OEM-3 E: Charcoal canister purge: no free low_side/ls_hs/injector/hbridge on MoTeC M130 - OEM-3 M: Alternator control: no free low_side/ls_hs/injector/hbridge on MoTeC M130 - OEM-3 U: Charge lamp: no free low_side/ls_hs/injector/hbridge on MoTeC M130 - OEM-4 D: VVT oil-control solenoid: no free low_side/ls_hs/injector/hbridge on MoTeC M130 - OEM-3 O: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on MoTeC M130
Sources
| Reliability | Kind | Title | URL |
|---|---|---|---|
| 4 | vendor_doc | Link G4X MX5NB2X install manual (NB2 2001-05) | https://linkecu.com/documentation/MX5XNB2.pdf |
| 4 | vendor_doc | MoTeC: M1 ECU Hardware manual (7 Nov 2013) — M130/M150/M170/M190 pinout tables | https://web.archive.org/web/2023id_/https://www.motec.com.au/hessian/uploads/M1_ECU_Hardware_c2517380e4.pdf |