RSX Type-S 2005-06 (K20Z1) → MaxxECU MaxxECU MINI REV10+ (auto)
RSX Type-S 2005-06 (K20Z1) — MaxxECU — MaxxECU MINI
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-04
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUMINI-C1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | TRIGGER | — | W18 | — | 0.5 | OEM-A-7 | — | — | — |
| A2 | TRIGGER GND | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| B1 | DIN 1 (Hall only) | — | W36 | — | 0.5 | OEM-A-18 | — | — | — |
| B2 | DIN 2 (Hall only) | — | W37 | — | 0.5 | OEM-B-10 | — | — | — |
| B3 | SENSOR GND | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| B4 | SENSOR GND | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| C1 | CLT | — | W34 | — | 0.5 | OEM-B-8 | — | — | — |
| C2 | IAT | — | W35 | — | 0.5 | OEM-B-17 | — | — | — |
| C3 | AIN 3 (0-5V) | — | W31 | — | 0.5 | OEM-A-30 | — | — | — |
| C4 | AIN 4 (0-5V) | — | W33 | — | 0.5 | OEM-E-20 | — | — | — |
| D1 | GPO 8/TACHO | — | W30 | — | 0.5 | OEM-E-18 | — | — | — |
| D2 | TPS | — | W32 | — | 0.5 | OEM-A-29 | — | — | — |
| D3 | GND Shield | — | — | — | — | — | — | — | — |
| D4 | SENSOR GND | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| E1 | GPO 3 | — | W29 | — | 0.5 | OEM-E-17 | — | — | — |
| E2 | +5V sensor supply | — | W17 | — | 0.5 | OEM-A-20 | — | — | — |
| E3 | CAN L | — | — | — | — | — | — | — | — |
| E4 | CAN H | — | — | — | — | — | — | — | — |
| F1 | IGN 1 | — | W19 | — | 0.5 | OEM-A-16 | — | — | — |
| F2 | IGN 2 | — | W20 | — | 0.5 | OEM-A-15 | — | — | — |
| F3 | IGN 3 | — | W21 | — | 0.5 | OEM-A-14 | — | — | — |
| F4 | IGN 4 | — | W22 | — | 0.5 | OEM-A-13 | — | — | — |
| G1 | GPO 2 | — | W28 | — | 0.5 | OEM-E-12 | — | — | — |
| G2 | GPO 1 | — | W27 | — | 0.5 | OEM-E-8 | — | — | — |
| G3 | INJ 1 | — | W23 | — | 0.5 | OEM-B-5 | — | — | — |
| G4 | ENGINE GND | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| H1 | INJ 2 | — | W24 | — | 0.5 | OEM-B-4 | — | — | — |
| H2 | INJ 3 | — | W25 | — | 0.5 | OEM-B-3 | — | — | — |
| H3 | INJ 4 | — | W26 | — | 0.5 | OEM-B-2 | — | — | — |
| H4 | +12V (ECU power supply) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Knock sensor (KS) | — | — | — | — | — | — | — | — |
| 2 | Ignition power 2 (IGP2) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Ignition power 1 (IGP1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Power ground 2 (PG2) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground 1 (PG1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Camshaft position B (CMP B) | — | — | — | — | — | — | — | — |
| 7 | Crank position sensor (CKP) | — | W18 | — | 0.5 | MAXXECUMINI-C1-A1 | — | — | — |
| 8 | Logic ground 2 (LG2) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Logic ground 1 (LG1) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | A/F sensor heater control (AFSHTC) | — | — | — | — | — | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | Idle air control valve (IACV) | — | — | — | — | — | — | — | — |
| 13 | Ignition coil 4 (IGPLS4) | — | W22 | — | 0.5 | MAXXECUMINI-C1-F4 | — | — | — |
| 14 | Ignition coil 3 (IGPLS3) | — | W21 | — | 0.5 | MAXXECUMINI-C1-F3 | — | — | — |
| 15 | Ignition coil 2 (IGPLS2) | — | W20 | — | 0.5 | MAXXECUMINI-C1-F2 | — | — | — |
| 16 | Ignition coil 1 (IGPLS1) | — | W19 | — | 0.5 | MAXXECUMINI-C1-F1 | — | — | — |
| 17 | — | — | — | — | — | — | — | — | — |
| 18 | Neutral position switch (NC) | — | W36 | — | 0.5 | MAXXECUMINI-C1-B1 | — | — | — |
| 19 | Camshaft position A (CMP A) | — | — | — | — | — | — | — | — |
| 20 | Sensor 5V supply 2 (VCC2) | — | W17 | — | 0.5 | MAXXECUMINI-C1-E2 | — | — | — |
| 21 | Sensor 5V supply 1 (VCC1) | — | — | — | — | — | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | Sensor ground 2 (SG2) | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Sensor ground 1 (SG1) | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 25 | — | — | — | — | — | — | — | — | — |
| 26 | — | — | — | — | — | — | — | — | — |
| 27 | — | — | — | — | — | — | — | — | — |
| 28 | A/F sensor - (AFS-, wideband Vs) | — | — | — | — | — | — | — | — |
| 29 | Throttle position sensor (TPS) | — | W32 | — | 0.5 | MAXXECUMINI-C1-D2 | — | — | — |
| 30 | Manifold absolute pressure (MAP) | — | W31 | — | 0.5 | MAXXECUMINI-C1-C3 | — | — | — |
| 31 | A/F sensor + (AFS+, wideband Ip) | — | — | — | — | — | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | VTC oil control solenoid (+) | — | — | — | — | — | — | — | — |
| 2 | Injector 4 (INJ4) | — | W26 | — | 0.5 | MAXXECUMINI-C1-H3 | — | — | — |
| 3 | Injector 3 (INJ3) | — | W25 | — | 0.5 | MAXXECUMINI-C1-H2 | — | — | — |
| 4 | Injector 2 (INJ2) | — | W24 | — | 0.5 | MAXXECUMINI-C1-H1 | — | — | — |
| 5 | Injector 1 (INJ1) | — | W23 | — | 0.5 | MAXXECUMINI-C1-G3 | — | — | — |
| 6 | VTEC solenoid (VTS) | — | — | — | — | — | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | Coolant temp sensor (ECT) | — | W34 | — | 0.5 | MAXXECUMINI-C1-C1 | — | — | — |
| 9 | — | — | — | — | — | — | — | — | — |
| 10 | Alternator L signal (ALTL) | — | W37 | — | 0.5 | MAXXECUMINI-C1-B2 | — | — | — |
| 11 | VTEC oil pressure switch (VTPSW) | — | — | — | — | — | — | — | — |
| 12 | — | — | — | — | — | — | — | — | — |
| 13 | Alternator FR signal (ALTF) | — | — | — | — | — | — | — | — |
| 14 | — | — | — | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — | — | — | — |
| 16 | — | — | — | — | — | — | — | — | — |
| 17 | Intake air temp sensor (IAT) | — | W35 | — | 0.5 | MAXXECUMINI-C1-C2 | — | — | — |
| 18 | Alternator control (ALTC) | — | — | — | — | — | — | — | — |
| 19 | — | — | — | — | — | — | — | — | — |
| 20 | — | — | — | — | — | — | — | — | — |
| 21 | Evap canister purge valve (PCS) | — | — | — | — | — | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | — | — | — | — | — | — | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
OEM-E
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | — | — | — | — | — | — | — |
| 2 | — | — | — | — | — | — | — | — | — |
| 3 | Reverse lockout solenoid (RVS, Type-S) | — | — | — | — | — | — | — | — |
| 4 | Logic ground 3 (LG3) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Sensor ground 3 (SG3) | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor 5V supply 3 (VCC3) | — | — | — | — | — | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | Main relay control (MRLY) | — | W27 | — | 0.5 | MAXXECUMINI-C1-G2 | — | — | — |
| 9 | A/F sensor heater relay control (AFSHTCR) | — | — | — | — | — | — | — | — |
| 10 | Ignition switch signal (IG1) | — | — | — | — | — | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | Radiator fan control (FANC) | — | W28 | — | 0.5 | MAXXECUMINI-C1-G1 | — | — | — |
| 13 | Multiplex communication (SEFMJ) | — | — | — | — | — | — | — | — |
| 14 | Fuel tank pressure sensor (FTP) | — | — | — | — | — | — | — | — |
| 15 | Electrical load detector (ELD) | — | — | — | — | — | — | — | — |
| 16 | Power steering pressure switch (PSPSW) | — | — | — | — | — | — | — | — |
| 17 | Immobilizer fuel pump relay (IMO FPR) | — | W29 | — | 0.5 | MAXXECUMINI-C1-E1 | — | — | — |
| 18 | A/C clutch relay (ACC) | — | W30 | — | 0.5 | MAXXECUMINI-C1-D1 | — | — | — |
| 19 | Evap vent shut valve (VSV) | — | — | — | — | — | — | — | — |
| 20 | Secondary heated O2 sensor (SHO2S) | — | W33 | — | 0.5 | MAXXECUMINI-C1-C4 | — | — | — |
| 21 | Secondary O2 heater control (SO2SHTC) | — | — | — | — | — | — | — | — |
| 22 | Brake switch (BKSW) | — | — | — | — | — | — | — | — |
| 23 | K-line (diagnostic) | — | — | — | — | — | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
| 25 | Engine speed pulse / tacho (NEP) | — | — | — | — | — | — | — | — |
| 26 | Vehicle speed output (VSSOUT) | — | — | — | — | — | — | — | — |
| 27 | Immobilizer code (IMOCD) | — | — | — | — | — | — | — | — |
| 28 | — | — | — | — | — | — | — | — | — |
| 29 | Service check signal (SCS) | — | — | — | — | — | — | — | — |
| 30 | Write enable signal (WEN) | — | — | — | — | — | — | — | — |
| 31 | Malfunction indicator lamp (MIL) | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | MAXXECUMINI-C1-B3 | — | — | — |
| 1 | — | — | W10 | — | 0.5 | OEM-A-23 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-A-24 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-E-5 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | MAXXECUMINI-C1-A2 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | MAXXECUMINI-C1-B4 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | MAXXECUMINI-C1-D4 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-2 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A-3 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MAXXECUMINI-C1-H4 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-A-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A-5 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A-8 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A-9 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-E-4 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | MAXXECUMINI-C1-G4 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Knock sensor (KS) | knock_in | — | — | — | single_source | |
| OEM-A-10 | A/F sensor heater control (AFSHTC) | low_side_out | — | — | — | single_source | |
| OEM-A-12 | Idle air control valve (IACV) | low_side_out | — | — | — | single_source | |
| OEM-A-13 | Ignition coil 4 (IGPLS4) | ignition_out | MAXXECUMINI-C1-F4 | IGN 4 | ignition_out | single_source | |
| OEM-A-14 | Ignition coil 3 (IGPLS3) | ignition_out | MAXXECUMINI-C1-F3 | IGN 3 | ignition_out | single_source | |
| OEM-A-15 | Ignition coil 2 (IGPLS2) | ignition_out | MAXXECUMINI-C1-F2 | IGN 2 | ignition_out | single_source | |
| OEM-A-16 | Ignition coil 1 (IGPLS1) | ignition_out | MAXXECUMINI-C1-F1 | IGN 1 | ignition_out | single_source | |
| OEM-A-18 | Neutral position switch (NC) | digital_in | MAXXECUMINI-C1-B1 | DIN 1 (Hall only) | digital_in | single_source | |
| OEM-A-19 | Camshaft position A (CMP A) | trigger_in | — | — | — | single_source | |
| OEM-A-2 | Ignition power 2 (IGP2) | power_in | MAXXECUMINI-C1-H4 | +12V (ECU power supply) | power_in | single_source | |
| OEM-A-20 | Sensor 5V supply 2 (VCC2) | vref | MAXXECUMINI-C1-E2 | +5V sensor supply | vref | single_source | |
| OEM-A-21 | Sensor 5V supply 1 (VCC1) | vref | — | — | — | single_source | |
| OEM-A-23 | Sensor ground 2 (SG2) | sensor_ground | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | single_source | |
| OEM-A-24 | Sensor ground 1 (SG1) | sensor_ground | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | single_source | |
| OEM-A-28 | A/F sensor - (AFS-, wideband Vs) | wb_vs | — | — | — | single_source | |
| OEM-A-29 | Throttle position sensor (TPS) | analog_in | MAXXECUMINI-C1-D2 | TPS | analog_in | single_source | |
| OEM-A-3 | Ignition power 1 (IGP1) | power_in | MAXXECUMINI-C1-H4 | +12V (ECU power supply) | power_in | single_source | |
| OEM-A-30 | Manifold absolute pressure (MAP) | analog_in | MAXXECUMINI-C1-C3 | AIN 3 (0-5V) | analog_in | single_source | |
| OEM-A-31 | A/F sensor + (AFS+, wideband Ip) | wb_ip | — | — | — | single_source | |
| OEM-A-4 | Power ground 2 (PG2) | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-A-5 | Power ground 1 (PG1) | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-A-6 | Camshaft position B (CMP B) | trigger_in | — | — | — | single_source | |
| OEM-A-7 | Crank position sensor (CKP) | trigger_in | MAXXECUMINI-C1-A1 | TRIGGER | trigger_in | single_source | |
| OEM-A-8 | Logic ground 2 (LG2) | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-A-9 | Logic ground 1 (LG1) | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-B-1 | VTC oil control solenoid (+) | low_side_out | — | — | — | single_source | |
| OEM-B-10 | Alternator L signal (ALTL) | digital_in | MAXXECUMINI-C1-B2 | DIN 2 (Hall only) | digital_in | single_source | |
| OEM-B-11 | VTEC oil pressure switch (VTPSW) | digital_in | — | — | — | single_source | |
| OEM-B-13 | Alternator FR signal (ALTF) | analog_in | — | — | — | single_source | |
| OEM-B-17 | Intake air temp sensor (IAT) | temp_in | MAXXECUMINI-C1-C2 | IAT | temp_in | single_source | |
| OEM-B-18 | Alternator control (ALTC) | low_side_out | — | — | — | single_source | |
| OEM-B-2 | Injector 4 (INJ4) | injector_out | MAXXECUMINI-C1-H3 | INJ 4 | injector_out | single_source | |
| OEM-B-21 | Evap canister purge valve (PCS) | low_side_out | — | — | — | single_source | |
| OEM-B-3 | Injector 3 (INJ3) | injector_out | MAXXECUMINI-C1-H2 | INJ 3 | injector_out | single_source | |
| OEM-B-4 | Injector 2 (INJ2) | injector_out | MAXXECUMINI-C1-H1 | INJ 2 | injector_out | single_source | |
| OEM-B-5 | Injector 1 (INJ1) | injector_out | MAXXECUMINI-C1-G3 | INJ 1 | injector_out | single_source | |
| OEM-B-6 | VTEC solenoid (VTS) | low_side_out | — | — | — | single_source | |
| OEM-B-8 | Coolant temp sensor (ECT) | temp_in | MAXXECUMINI-C1-C1 | CLT | temp_in | single_source | |
| OEM-E-10 | Ignition switch signal (IG1) | digital_in | — | — | — | single_source | |
| OEM-E-12 | Radiator fan control (FANC) | low_side_out | MAXXECUMINI-C1-G1 | GPO 2 | low_side_out | single_source | |
| OEM-E-13 | Multiplex communication (SEFMJ) | serial | — | — | — | single_source | |
| OEM-E-14 | Fuel tank pressure sensor (FTP) | analog_in | — | — | — | single_source | |
| OEM-E-15 | Electrical load detector (ELD) | analog_in | — | — | — | single_source | |
| OEM-E-16 | Power steering pressure switch (PSPSW) | digital_in | — | — | — | single_source | |
| OEM-E-17 | Immobilizer fuel pump relay (IMO FPR) | low_side_out | MAXXECUMINI-C1-E1 | GPO 3 | low_side_out | single_source | |
| OEM-E-18 | A/C clutch relay (ACC) | low_side_out | MAXXECUMINI-C1-D1 | GPO 8/TACHO | low_side_out | single_source | |
| OEM-E-19 | Evap vent shut valve (VSV) | low_side_out | — | — | — | single_source | |
| OEM-E-20 | Secondary heated O2 sensor (SHO2S) | lambda_nb_in | MAXXECUMINI-C1-C4 | AIN 4 (0-5V) | analog_in | single_source | |
| OEM-E-21 | Secondary O2 heater control (SO2SHTC) | low_side_out | — | — | — | single_source | |
| OEM-E-22 | Brake switch (BKSW) | digital_in | — | — | — | single_source | |
| OEM-E-23 | K-line (diagnostic) | serial | — | — | — | single_source | |
| OEM-E-25 | Engine speed pulse / tacho (NEP) | tacho_out | — | — | — | single_source | |
| OEM-E-26 | Vehicle speed output (VSSOUT) | tacho_out | — | — | — | single_source | |
| OEM-E-27 | Immobilizer code (IMOCD) | — | — | — | — | single_source | |
| OEM-E-29 | Service check signal (SCS) | — | — | — | — | single_source | |
| OEM-E-3 | Reverse lockout solenoid (RVS, Type-S) | low_side_out | — | — | — | single_source | |
| OEM-E-30 | Write enable signal (WEN) | — | — | — | — | single_source | |
| OEM-E-31 | Malfunction indicator lamp (MIL) | low_side_out | — | — | — | single_source | |
| OEM-E-4 | Logic ground 3 (LG3) | ground | MAXXECUMINI-C1-G4 | ENGINE GND | ground | single_source | |
| OEM-E-5 | Sensor ground 3 (SG3) | sensor_ground | MAXXECUMINI-C1-A2 + MAXXECUMINI-C1-B3 + MAXXECUMINI-C1-B4 + MAXXECUMINI-C1-D4 | TRIGGER GND + SENSOR GND + SENSOR GND + SENSOR GND | sensor_ground | single_source | |
| OEM-E-6 | Sensor 5V supply 3 (VCC3) | vref | — | — | — | single_source | |
| OEM-E-8 | Main relay control (MRLY) | low_side_out | MAXXECUMINI-C1-G2 | GPO 1 | low_side_out | single_source | |
| OEM-E-9 | A/F sensor heater relay control (AFSHTCR) | low_side_out | — | — | — | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-2 | SP-14V-1 | 0.85 | no route | Ignition power 2 (IGP2) | — | |
| W2 | OEM-A-3 | SP-14V-1 | 0.85 | no route | Ignition power 1 (IGP1) | — | |
| W3 | SP-14V-1 | MAXXECUMINI-C1-H4 | 0.85 | no route | +12V (ECU power supply) | — | |
| W4 | OEM-A-4 | SP-GND-1 | 0.85 | no route | Power ground 2 (PG2) | — | |
| W5 | OEM-A-5 | SP-GND-1 | 0.85 | no route | Power ground 1 (PG1) | — | |
| W6 | OEM-A-8 | SP-GND-1 | 0.85 | no route | Logic ground 2 (LG2) | — | |
| W7 | OEM-A-9 | SP-GND-1 | 0.85 | no route | Logic ground 1 (LG1) | — | |
| W8 | OEM-E-4 | SP-GND-1 | 0.85 | no route | Logic ground 3 (LG3) | — | |
| W9 | SP-GND-1 | MAXXECUMINI-C1-G4 | 0.85 | no route | ENGINE GND | — | |
| W10 | OEM-A-23 | SP-0V-1 | 0.5 | no route | Sensor ground 2 (SG2) | — | |
| W11 | OEM-A-24 | SP-0V-1 | 0.5 | no route | Sensor ground 1 (SG1) | — | |
| W12 | OEM-E-5 | SP-0V-1 | 0.5 | no route | Sensor ground 3 (SG3) | — | |
| W13 | SP-0V-1 | MAXXECUMINI-C1-A2 | 0.5 | no route | TRIGGER GND | — | |
| W14 | SP-0V-1 | MAXXECUMINI-C1-B3 | 0.5 | no route | SENSOR GND | — | |
| W15 | SP-0V-1 | MAXXECUMINI-C1-B4 | 0.5 | no route | SENSOR GND | — | |
| W16 | SP-0V-1 | MAXXECUMINI-C1-D4 | 0.5 | no route | SENSOR GND | — | |
| W17 | OEM-A-20 | MAXXECUMINI-C1-E2 | 0.5 | no route | Sensor 5V supply 2 (VCC2) | — | |
| W18 | OEM-A-7 | MAXXECUMINI-C1-A1 | 0.5 | no route | Crank position sensor (CKP) | — | |
| W19 | OEM-A-16 | MAXXECUMINI-C1-F1 | 0.5 | no route | Ignition coil 1 (IGPLS1) | — | |
| W20 | OEM-A-15 | MAXXECUMINI-C1-F2 | 0.5 | no route | Ignition coil 2 (IGPLS2) | — | |
| W21 | OEM-A-14 | MAXXECUMINI-C1-F3 | 0.5 | no route | Ignition coil 3 (IGPLS3) | — | |
| W22 | OEM-A-13 | MAXXECUMINI-C1-F4 | 0.5 | no route | Ignition coil 4 (IGPLS4) | — | |
| W23 | OEM-B-5 | MAXXECUMINI-C1-G3 | 0.5 | no route | Injector 1 (INJ1) | — | |
| W24 | OEM-B-4 | MAXXECUMINI-C1-H1 | 0.5 | no route | Injector 2 (INJ2) | — | |
| W25 | OEM-B-3 | MAXXECUMINI-C1-H2 | 0.5 | no route | Injector 3 (INJ3) | — | |
| W26 | OEM-B-2 | MAXXECUMINI-C1-H3 | 0.5 | no route | Injector 4 (INJ4) | — | |
| W27 | OEM-E-8 | MAXXECUMINI-C1-G2 | 0.5 | no route | Main relay control (MRLY) | — | |
| W28 | OEM-E-12 | MAXXECUMINI-C1-G1 | 0.5 | no route | Radiator fan control (FANC) | — | |
| W29 | OEM-E-17 | MAXXECUMINI-C1-E1 | 0.5 | no route | Immobilizer fuel pump relay (IMO FPR) | — | |
| W30 | OEM-E-18 | MAXXECUMINI-C1-D1 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W31 | OEM-A-30 | MAXXECUMINI-C1-C3 | 0.5 | no route | Manifold absolute pressure (MAP) | — | |
| W32 | OEM-A-29 | MAXXECUMINI-C1-D2 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W33 | OEM-E-20 | MAXXECUMINI-C1-C4 | 0.5 | no route | Secondary heated O2 sensor (SHO2S) | — | |
| W34 | OEM-B-8 | MAXXECUMINI-C1-C1 | 0.5 | no route | Coolant temp sensor (ECT) | — | |
| W35 | OEM-B-17 | MAXXECUMINI-C1-C2 | 0.5 | no route | Intake air temp sensor (IAT) | — | |
| W36 | OEM-A-18 | MAXXECUMINI-C1-B1 | 0.5 | no route | Neutral position switch (NC) | — | |
| W37 | OEM-B-10 | MAXXECUMINI-C1-B2 | 0.5 | no route | Alternator L signal (ALTL) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 1318682-6 | TE | K-series ECU harness plug A (040-3 HD plug assy, 31P) | 1.000 | ea |
| connector | 353029-1 | TE | K-series ECU harness plug B (040 H/D-3 plug HSG assy, 24P) | 1.000 | ea |
| connector | 353826-1 | TE | K-series ECU harness plug E (040 HD 31P plug HSG assy-B, 31P) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (12)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-A-19 | Required OEM function "Camshaft position A (CMP A)" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-21 | Required OEM function "Sensor 5V supply 1 (VCC1)" (vref) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-6 | Required OEM function "Camshaft position B (CMP B)" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E-10 | Required OEM function "Ignition switch signal (IG1)" (digital_in) is not connected to the new ECU. |
| warn | DATASET_GAP | RSX ECU A | 6 of 31 cavities on RSX ECU A have no pin data (11,17,22,25,26,27). Anything there is invisible to these checks. |
| warn | DATASET_GAP | RSX ECU B | 11 of 24 cavities on RSX ECU B have no pin data (7,9,12,14,15,16,19,20,22,23,24). Anything there is invisible to these checks. |
| warn | DATASET_GAP | RSX ECU E | 6 of 31 cavities on RSX ECU E have no pin data (1,2,7,11,24,28). Anything there is invisible to these checks. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-D1 | MAXXECUMINI-C1-D1 "GPO 8/TACHO" drives OEM-E-18 A/C clutch relay (ACC) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-E1 | MAXXECUMINI-C1-E1 "GPO 3" drives OEM-E-17 Immobilizer fuel pump relay (IMO FPR) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-G1 | MAXXECUMINI-C1-G1 "GPO 2" drives OEM-E-12 Radiator fan control (FANC) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECUMINI-C1-G2 | MAXXECUMINI-C1-G2 "GPO 1" drives OEM-E-8 Main relay control (MRLY) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| info | UNMAPPED | OEM | 28 optional OEM pins are not mapped: OEM-A-1 Knock sensor (KS); OEM-A-10 A/F sensor heater control (AFSHTC); OEM-A-12 Idle air control valve (IACV); OEM-A-28 A/F sensor - (AFS-, wideband Vs); OEM-A-31 A/F sensor + (AFS+, wideband Ip); OEM-B-1 VTC oil control solenoid (+); OEM-B-11 VTEC oil pressure switch (VTPSW); OEM-B-13 Alternator FR signal (ALTF); OEM-B-18 Alternator control (ALTC); OEM-B-21 Evap canister purge valve (PCS); OEM-B-6 VTEC solenoid (VTS); OEM-E-13 Multiplex communication (SEFMJ); OEM-E-14 Fuel tank pressure sensor (FTP); OEM-E-15 Electrical load detector (ELD); OEM-E-16 Power steering pressure switch (PSPSW); OEM-E-19 Evap vent shut valve (VSV); OEM-E-21 Secondary O2 heater control (SO2SHTC); OEM-E-22 Brake switch (BKSW); OEM-E-23 K-line (diagnostic); OEM-E-25 Engine speed pulse / tacho (NEP); OEM-E-26 Vehicle speed output (VSSOUT); OEM-E-27 Immobilizer code (IMOCD); OEM-E-29 Service check signal (SCS); OEM-E-3 Reverse lockout solenoid (RVS, Type-S); OEM-E-30 Write enable signal (WEN); OEM-E-31 Malfunction indicator lamp (MIL); OEM-E-6 Sensor 5V supply 3 (VCC3); OEM-E-9 A/F sensor heater relay control (AFSHTCR) |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-04. Review every wire against both manuals before building. Open items: - OEM-A 21: Sensor 5V supply 1 (VCC1): no free 5 V reference left on MaxxECU MaxxECU MINI for supply group "k_vcc1" (groups must stay separate) - OEM-E 6: Sensor 5V supply 3 (VCC3): no free 5 V reference left on MaxxECU MaxxECU MINI for supply group "k_vcc3" (groups must stay separate) - OEM-A 19: Camshaft position A (CMP A): no free cam_vr/cam_hall/frequency_in input on MaxxECU MaxxECU MINI - OEM-A 6: Camshaft position B (CMP B): no free cam_vr/cam_hall/frequency_in input on MaxxECU MaxxECU MINI - OEM-E 10: Ignition switch signal (IG1): no free ign_switch_in on MaxxECU MaxxECU MINI Not wired: - OEM-A 1: Knock sensor (KS): no free knock input on MaxxECU MaxxECU MINI - OEM-E 9: A/F sensor heater relay control (AFSHTCR): no free relay_control/low_side/ls_hs/injector/hbridge rated ≥ 0.2 A on MaxxECU MaxxECU MINI - OEM-E 21: Secondary O2 heater control (SO2SHTC): no free heater_low_side/low_side/ls_hs/hbridge on MaxxECU MaxxECU MINI - OEM-A 10: A/F sensor heater control (AFSHTC): no free heater_low_side/low_side/ls_hs/hbridge on MaxxECU MaxxECU MINI - OEM-A 12: Idle air control valve (IACV): no free low_side/ls_hs/injector/hbridge rated ≥ 1.0 A on MaxxECU MaxxECU MINI - OEM-B 6: VTEC solenoid (VTS): no free low_side/ls_hs/injector/hbridge rated ≥ 1.0 A on MaxxECU MaxxECU MINI - OEM-B 1: VTC oil control solenoid (+): no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-B 18: Alternator control (ALTC): no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-B 21: Evap canister purge valve (PCS): no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-E 19: Evap vent shut valve (VSV): no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-E 3: Reverse lockout solenoid (RVS, Type-S): no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-E 31: Malfunction indicator lamp (MIL): no free low_side/ls_hs/injector/hbridge on MaxxECU MaxxECU MINI - OEM-E 25: Engine speed pulse / tacho (NEP): no free tacho/frequency_out/low_side/ls_hs on MaxxECU MaxxECU MINI - OEM-E 26: Vehicle speed output (VSSOUT): no free frequency_out/tacho/low_side/ls_hs on MaxxECU MaxxECU MINI - OEM-A 31: A/F sensor + (AFS+, wideband Ip): no free wb_ip on MaxxECU MaxxECU MINI - OEM-A 28: A/F sensor - (AFS-, wideband Vs): no free wb_vs on MaxxECU MaxxECU MINI - OEM-B 13: Alternator FR signal (ALTF): no free analog_0_5 on MaxxECU MaxxECU MINI - OEM-E 14: Fuel tank pressure sensor (FTP): no free analog_0_5 on MaxxECU MaxxECU MINI - OEM-E 15: Electrical load detector (ELD): no free analog_0_5 on MaxxECU MaxxECU MINI - OEM-B 11: VTEC oil pressure switch (VTPSW): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-E 16: Power steering pressure switch (PSPSW): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-E 22: Brake switch (BKSW): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU MINI - OEM-E 13: Multiplex communication (SEFMJ): no free k_line on MaxxECU MaxxECU MINI - OEM-E 23: K-line (diagnostic): no free k_line on MaxxECU MaxxECU MINI - OEM-E 27: Immobilizer code (IMOCD): not classified in the library; wire by hand - OEM-E 29: Service check signal (SCS): not classified in the library; wire by hand - OEM-E 30: Write enable signal (WEN): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL |
|---|---|---|---|
| 4 | vendor_doc | MaxxECU GEN1 pinout (MINI / STREET / SPORT / V1 / RACE / PRO) | http://www.maxxecu.com/webhelp/wirings-maxxecu_pinout.html |
| 3 | forum | FFS TechNet: K-series 02-06 RSX ECU pin diagram (Helm) | https://ff-squad.com/technet2/k-series-02-06-rsx-ecu-pin-diagram/ |