S2000 AP2 2006–09 cable conversion → MoTeC M800
AP2 2006–09 converted to cable throttle — MoTeC — M800
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-05
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
M800-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | AUX2 | — | W26 | — | 0.5 | OEM-E-7 | — | — | — |
| 2 | 5V Engine Sensor Supply | — | — | — | — | — | — | — | — |
| 3 | IGN1 | — | W17 | — | 0.5 | OEM-A-16 | — | — | — |
| 4 | IGN2 | — | W18 | — | 0.5 | OEM-A-15 | — | — | — |
| 5 | IGN3 | — | W19 | — | 0.5 | OEM-A-14 | — | — | — |
| 6 | IGN4 | — | W20 | — | 0.5 | OEM-A-13 | — | — | — |
| 7 | IGN5 | — | — | — | — | — | — | — | — |
| 8 | IGN6 | — | — | — | — | — | — | — | — |
| 9 | 5V Auxiliary Sensor Supply | — | W52 | — | 0.5 | SP-5V-1 | — | — | — |
| 10 | GND Battery Negative | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | GND Battery Negative | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | 8V Engine Sensor Supply | — | — | — | — | — | — | — | — |
| 13 | 8V Auxiliary Sensor and CAN Supply | — | — | — | — | — | — | — | — |
| 14 | AV1 | — | W36 | — | 0.5 | OEM-A-30 | — | — | — |
| 15 | Analog Voltage Input 2 | — | — | — | — | — | — | — | — |
| 16 | Analog Voltage Input 3 | — | W54 | — | 0.5 | TPS-J-SIG | — | — | — |
| 17 | Analog Voltage Input 4 | — | W37 | — | 0.5 | OEM-E-20 | — | — | — |
| 18 | AUX1 | — | W25 | — | 0.5 | OEM-E-17 | — | — | — |
| 19 | INJ1 | — | W21 | — | 0.5 | OEM-B-5 | — | — | — |
| 20 | INJ2 | — | W22 | — | 0.5 | OEM-B-4 | — | — | — |
| 21 | INJ3 | — | W23 | — | 0.5 | OEM-B-3 | — | — | — |
| 22 | INJ4 | — | W24 | — | 0.5 | OEM-B-2 | — | — | — |
| 23 | AUX3 | — | — | — | — | — | — | — | — |
| 24 | AUX4 | — | W27 | — | 0.5 | OEM-E-12 | — | — | — |
| 25 | Analog Voltage Input 5 | — | W41 | — | 0.5 | OEM-B-13 | — | — | — |
| 26 | VBAT Battery Positive | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | INJ5 | — | W32 | — | 0.5 | OEM-B-15 | — | — | — |
| 28 | INJ6 | — | W33 | — | 0.5 | OEM-B-18 | — | — | — |
| 29 | INJ7 | — | W34 | — | 0.5 | OEM-B-21 | — | — | — |
| 30 | INJ8 | — | W35 | — | 0.5 | OEM-E-19 | — | — | — |
| 31 | AUX5 | — | W28 | — | 0.5 | OEM-E-18 | — | — | — |
| 32 | AUX6 | — | W29 | — | 0.5 | OEM-E-8 | — | — | — |
| 33 | AUX7 | — | W30 | — | 0.5 | OEM-B-6 | — | — | — |
| 34 | AUX8 | — | W31 | — | 0.5 | OEM-E-21 | — | — | — |
M800-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Crank Reference Timing Input | — | W15 | — | 0.5 | OEM-A-7 | — | — | — |
| 2 | Cam Sync Timing Input | — | W16 | — | 0.5 | OEM-A-6 | — | — | — |
| 3 | Analog Temperature Input 1 | — | W38 | — | 0.5 | OEM-B-8 | — | — | — |
| 4 | Analog Temperature Input 2 | — | W39 | — | 0.5 | OEM-E-1 | — | — | — |
| 5 | Analog Temperature Input 3 | — | W40 | — | 0.5 | OEM-B-17 | — | — | — |
| 6 | Analog Temperature Input 4 | — | — | — | — | — | — | — | — |
| 7 | Analog Temperature Input 5 | — | — | — | — | — | — | — | — |
| 8 | Digital Input 1 | — | W45 | — | 0.5 | OEM-A-18 | — | — | — |
| 9 | Digital Input 2 | — | W46 | — | 0.5 | OEM-B-11 | — | — | — |
| 10 | Digital Input 3 | — | W47 | — | 0.5 | OEM-D-1 | — | — | — |
| 11 | Digital Input 4 | — | W48 | — | 0.5 | OEM-D-4 | — | — | — |
| 12 | Lambda2 Sense Voltage | — | — | — | — | — | — | — | — |
| 13 | Lambda2 Pump Current | — | — | — | — | — | — | — | — |
| 14 | 0V Comms Reference | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | 0V Auxiliary Sensor Supply | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | 0V Engine Sensor Supply | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | RS232 Transmit Data | — | — | — | — | — | — | — | — |
| 18 | RS232 Receive Data | — | — | — | — | — | — | — | — |
| 19 | Analog Temperature Input 6 | — | — | — | — | — | — | — | — |
| 20 | Analog Voltage Input 6 | — | W42 | — | 0.5 | OEM-E-14 | — | — | — |
| 21 | AV7 | — | W43 | — | 0.5 | OEM-E-15 | — | — | — |
| 22 | AV8 | — | W44 | — | 0.5 | OEM-E-16 | — | — | — |
| 23 | CAN Bus High | — | W49 | — | 0.5 | OEM-E-11 | — | — | — |
| 24 | CAN Bus Low | — | W50 | — | 0.5 | OEM-E-24 | — | — | — |
| 25 | Lambda1 Sense Voltage | — | — | — | — | — | — | — | — |
| 26 | Lambda1 Pump Current | — | — | — | — | — | — | — | — |
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Knock sensor | — | — | — | — | — | — | — | — |
| 2 | Ignition power 2 | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Ignition power 1 | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Power ground 2 | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground 1 | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Cam position sensor (T2) | — | W16 | — | 0.5 | M800-B-2 | — | — | — |
| 7 | Crank position sensor (T1) | — | W15 | — | 0.5 | M800-B-1 | — | — | — |
| 8 | Logic ground 2 | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Logic ground 1 | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | A/F sensor heater | — | — | — | — | — | — | — | — |
| 11 | Unused cavity | — | — | — | — | — | — | — | — |
| 12 | Unused cavity | — | — | — | — | — | — | — | — |
| 13 | Ignition coil 4 | — | W20 | — | 0.5 | M800-A-6 | — | — | — |
| 14 | Ignition coil 3 | — | W19 | — | 0.5 | M800-A-5 | — | — | — |
| 15 | Ignition coil 2 | — | W18 | — | 0.5 | M800-A-4 | — | — | — |
| 16 | Ignition coil 1 | — | W17 | — | 0.5 | M800-A-3 | — | — | — |
| 17 | Unused cavity | — | — | — | — | — | — | — | — |
| 18 | Vehicle speed sensor | — | W45 | — | 0.5 | M800-B-8 | — | — | — |
| 19 | Unused cavity | — | — | — | — | — | — | — | — |
| 20 | Sensor voltage 2 | — | — | — | — | — | — | — | — |
| 21 | Sensor voltage 1 | — | W51 | — | 0.5 | SP-5V-1 | — | — | — |
| 22 | Unused cavity | — | — | — | — | — | — | — | — |
| 23 | Sensor ground 2 | — | — | — | — | — | — | — | — |
| 24 | Sensor ground 1 | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 25 | Accelerator pedal position B | — | — | — | — | — | — | — | — |
| 26 | Accelerator pedal position A | — | — | — | — | — | — | — | — |
| 27 | Unused cavity | — | — | — | — | — | — | — | — |
| 28 | A/F sensor signal − | — | — | — | — | — | — | — | — |
| 29 | Unused cavity | — | — | — | — | — | — | — | — |
| 30 | MAP sensor | — | W36 | — | 0.5 | M800-A-14 | — | — | — |
| 31 | A/F sensor signal + | — | — | — | — | — | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Unused cavity | — | — | — | — | — | — | — | — |
| 2 | Injector 4 | — | W24 | — | 0.5 | M800-A-22 | — | — | — |
| 3 | Injector 3 | — | W23 | — | 0.5 | M800-A-21 | — | — | — |
| 4 | Injector 2 | — | W22 | — | 0.5 | M800-A-20 | — | — | — |
| 5 | Injector 1 | — | W21 | — | 0.5 | M800-A-19 | — | — | — |
| 6 | VTEC solenoid | — | W30 | — | 0.5 | M800-A-33 | — | — | — |
| 7 | Unused cavity | — | — | — | — | — | — | — | — |
| 8 | Coolant temp sensor | — | W38 | — | 0.5 | M800-B-3 | — | — | — |
| 9 | Unused cavity | — | — | — | — | — | — | — | — |
| 10 | Alternator L signal | — | — | — | — | — | — | — | — |
| 11 | VTEC oil pressure switch | — | W46 | — | 0.5 | M800-B-9 | — | — | — |
| 12 | Unused cavity | — | — | — | — | — | — | — | — |
| 13 | Alternator FR signal | — | W41 | — | 0.5 | M800-A-25 | — | — | — |
| 14 | Unused cavity | — | — | — | — | — | — | — | — |
| 15 | Engine mount control solenoid | — | W32 | — | 0.5 | M800-A-27 | — | — | — |
| 16 | Unused cavity | — | — | — | — | — | — | — | — |
| 17 | Intake air temp sensor | — | W40 | — | 0.5 | M800-B-5 | — | — | — |
| 18 | Alternator control | — | W33 | — | 0.5 | M800-A-28 | — | — | — |
| 19 | Throttle actuator command to throttle control module (SEFD) | — | — | — | — | — | — | — | — |
| 20 | Throttle actuator command to throttle control module (SEDF) | — | — | — | — | — | — | — | — |
| 21 | Evap canister purge valve | — | W34 | — | 0.5 | M800-A-29 | — | — | — |
| 22 | Unused cavity | — | — | — | — | — | — | — | — |
| 23 | Unused cavity | — | — | — | — | — | — | — | — |
| 24 | Unused cavity | — | — | — | — | — | — | — | — |
OEM-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Cruise set switch | — | W47 | — | 0.5 | M800-B-10 | — | — | — |
| 2 | Unused cavity | — | — | — | — | — | — | — | — |
| 3 | Unused cavity | — | — | — | — | — | — | — | — |
| 4 | Cruise main switch | — | W48 | — | 0.5 | M800-B-11 | — | — | — |
| 5 | Unused cavity | — | — | — | — | — | — | — | — |
| 6 | Unused cavity | — | — | — | — | — | — | — | — |
| 7 | Cruise resume switch | — | — | — | — | — | — | — | — |
| 8 | Brake pedal position switch | — | — | — | — | — | — | — | — |
| 9 | Cruise clutch signal | — | — | — | — | — | — | — | — |
| 10 | Unused cavity | — | — | — | — | — | — | — | — |
| 11 | Unused cavity | — | — | — | — | — | — | — | — |
| 12 | Unused cavity | — | — | — | — | — | — | — | — |
| 13 | Unused cavity | — | — | — | — | — | — | — | — |
| 14 | Unused cavity | — | — | — | — | — | — | — | — |
| 15 | Throttle actuator relay | — | — | — | — | — | — | — | — |
| 16 | Unused cavity | — | — | — | — | — | — | — | — |
| 17 | Unused cavity | — | — | — | — | — | — | — | — |
OEM-E
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Coolant temp sensor 2 | — | W39 | — | 0.5 | M800-B-4 | — | — | — |
| 2 | Unused cavity | — | — | — | — | — | — | — | — |
| 3 | Logic ground 3 | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Sensor ground 3 | — | — | — | — | — | — | — | — |
| 5 | Sensor voltage 3 | — | — | — | — | — | — | — | — |
| 6 | Unused cavity | — | — | — | — | — | — | — | — |
| 7 | Main relay control | — | W26 | — | 0.5 | M800-A-1 | — | — | — |
| 8 | A/F sensor heater relay | — | W29 | — | 0.5 | M800-A-32 | — | — | — |
| 9 | Ignition signal | — | — | — | — | — | — | — | — |
| 10 | Unused cavity | — | — | — | — | — | — | — | — |
| 11 | CAN H | — | W49 | — | 0.5 | M800-B-23 | — | — | — |
| 12 | Radiator fan control | — | W27 | — | 0.5 | M800-A-24 | — | — | — |
| 13 | Multiplex communication | — | — | — | — | — | — | — | — |
| 14 | Fuel tank pressure sensor | — | W42 | — | 0.5 | M800-B-20 | — | — | — |
| 15 | Electrical load detector | — | W43 | — | 0.5 | M800-B-21 | — | — | — |
| 16 | Power steering load detector | — | W44 | — | 0.5 | M800-B-22 | — | — | — |
| 17 | Fuel pump relay | — | W25 | — | 0.5 | M800-A-18 | — | — | — |
| 18 | A/C clutch relay | — | W28 | — | 0.5 | M800-A-31 | — | — | — |
| 19 | Evap canister vent shut valve | — | W35 | — | 0.5 | M800-A-30 | — | — | — |
| 20 | Secondary O2 sensor | — | W37 | — | 0.5 | M800-A-17 | — | — | — |
| 21 | Secondary O2 heater | — | W31 | — | 0.5 | M800-A-34 | — | — | — |
| 22 | Brake pedal switch | — | — | — | — | — | — | — | — |
| 23 | Unused cavity | — | — | — | — | — | — | — | — |
| 24 | CAN L | — | W50 | — | 0.5 | M800-B-24 | — | — | — |
| 25 | Engine speed pulse (tacho) | — | — | — | — | — | — | — | — |
| 26 | Vehicle speed output | — | — | — | — | — | — | — | — |
| 27 | Immobilizer code | — | — | — | — | — | — | — | — |
| 28 | A/C switch signal | — | — | — | — | — | — | — | — |
| 29 | Service check signal | — | — | — | — | — | — | — | — |
| 30 | Write enable signal | — | — | — | — | — | — | — | — |
| 31 | Unused cavity | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W55 | — | 0.5 | TPS-J-GND | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-A-24 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | M800-B-14 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | M800-B-15 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | M800-B-16 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W3 | — | 0.85 | M800-A-26 | — | — | — |
| 1 | — | — | W1 | — | 0.85 | OEM-A-2 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A-3 | — | — | — |
SP-5V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W51 | — | 0.5 | OEM-A-21 | — | — | — |
| 1 | — | — | W52 | — | 0.5 | M800-A-9 | — | — | — |
| 1 | — | — | W53 | — | 0.5 | TPS-J-VCC | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.85 | M800-A-11 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-A-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A-5 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A-9 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-E-3 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | M800-A-10 | — | — | — |
TPS-J
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| VCC | 5V supply in | — | W53 | — | 0.5 | SP-5V-1 | — | — | — |
| SIG | Throttle position signal | — | W54 | — | 0.5 | M800-A-16 | — | — | — |
| GND | Sensor ground | — | W55 | — | 0.5 | SP-0V-1 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Knock sensor | knock_in | — | — | — | single_source | |
| OEM-A-10 | A/F sensor heater | low_side_out | — | — | — | single_source | |
| OEM-A-11 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-12 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-13 | Ignition coil 4 | ignition_out | M800-A-6 | IGN4 | ignition_out | single_source | |
| OEM-A-14 | Ignition coil 3 | ignition_out | M800-A-5 | IGN3 | ignition_out | single_source | |
| OEM-A-15 | Ignition coil 2 | ignition_out | M800-A-4 | IGN2 | ignition_out | single_source | |
| OEM-A-16 | Ignition coil 1 | ignition_out | M800-A-3 | IGN1 | ignition_out | single_source | |
| OEM-A-17 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-18 | Vehicle speed sensor | digital_in | M800-B-8 | Digital Input 1 | digital_in | single_source | |
| OEM-A-19 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-2 | Ignition power 2 | power_in | M800-A-26 | VBAT Battery Positive | power_in | single_source | |
| OEM-A-20 | Sensor voltage 2 | vref | — | — | — | corroborated | |
| OEM-A-21 | Sensor voltage 1 | vref | M800-A-9 + TPS-J-VCC | 5V Auxiliary Sensor Supply + 5V supply in | power_in + vref | single_source | |
| OEM-A-22 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-23 | Sensor ground 2 | sensor_ground | — | — | — | corroborated | |
| OEM-A-24 | Sensor ground 1 | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 + TPS-J-GND | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply + Sensor ground | sensor_ground | single_source | |
| OEM-A-25 | Accelerator pedal position B | analog_in | — | — | — | corroborated | |
| OEM-A-26 | Accelerator pedal position A | analog_in | — | — | — | corroborated | |
| OEM-A-27 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-28 | A/F sensor signal − | — | — | — | — | single_source | |
| OEM-A-29 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-3 | Ignition power 1 | power_in | M800-A-26 | VBAT Battery Positive | power_in | single_source | |
| OEM-A-30 | MAP sensor | analog_in | M800-A-14 | AV1 | analog_in | single_source | |
| OEM-A-31 | A/F sensor signal + | — | — | — | — | single_source | |
| OEM-A-4 | Power ground 2 | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | single_source | |
| OEM-A-5 | Power ground 1 | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | single_source | |
| OEM-A-6 | Cam position sensor (T2) | trigger_in | M800-B-2 | Cam Sync Timing Input | trigger_in | single_source | |
| OEM-A-7 | Crank position sensor (T1) | trigger_in | M800-B-1 | Crank Reference Timing Input | trigger_in | single_source | |
| OEM-A-8 | Logic ground 2 | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | single_source | |
| OEM-A-9 | Logic ground 1 | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | single_source | |
| OEM-B-1 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-10 | Alternator L signal | — | — | — | — | single_source | |
| OEM-B-11 | VTEC oil pressure switch | digital_in | M800-B-9 | Digital Input 2 | digital_in | single_source | |
| OEM-B-12 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-13 | Alternator FR signal | analog_in | M800-A-25 | Analog Voltage Input 5 | analog_in | single_source | |
| OEM-B-14 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-15 | Engine mount control solenoid | low_side_out | M800-A-27 | INJ5 | injector_out | single_source | |
| OEM-B-16 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-17 | Intake air temp sensor | temp_in | M800-B-5 | Analog Temperature Input 3 | temp_in | single_source | |
| OEM-B-18 | Alternator control | low_side_out | M800-A-28 | INJ6 | injector_out | single_source | |
| OEM-B-19 | Throttle actuator command to throttle control module (SEFD) | — | — | — | — | conflict | |
| OEM-B-2 | Injector 4 | injector_out | M800-A-22 | INJ4 | injector_out | single_source | |
| OEM-B-20 | Throttle actuator command to throttle control module (SEDF) | — | — | — | — | conflict | |
| OEM-B-21 | Evap canister purge valve | low_side_out | M800-A-29 | INJ7 | injector_out | single_source | |
| OEM-B-22 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-23 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-24 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-3 | Injector 3 | injector_out | M800-A-21 | INJ3 | injector_out | single_source | |
| OEM-B-4 | Injector 2 | injector_out | M800-A-20 | INJ2 | injector_out | single_source | |
| OEM-B-5 | Injector 1 | injector_out | M800-A-19 | INJ1 | injector_out | single_source | |
| OEM-B-6 | VTEC solenoid | high_side_out | M800-A-33 | AUX7 | switch_out | single_source | |
| OEM-B-7 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-8 | Coolant temp sensor | temp_in | M800-B-3 | Analog Temperature Input 1 | temp_in | single_source | |
| OEM-B-9 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-1 | Cruise set switch | digital_in | M800-B-10 | Digital Input 3 | digital_in | single_source | |
| OEM-D-10 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-11 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-12 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-13 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-14 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-15 | Throttle actuator relay | low_side_out | — | — | — | single_source | |
| OEM-D-16 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-17 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-2 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-3 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-4 | Cruise main switch | digital_in | M800-B-11 | Digital Input 4 | digital_in | single_source | |
| OEM-D-5 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-6 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-7 | Cruise resume switch | digital_in | — | — | — | single_source | |
| OEM-D-8 | Brake pedal position switch | digital_in | — | — | — | single_source | |
| OEM-D-9 | Cruise clutch signal | digital_in | — | — | — | single_source | |
| OEM-E-1 | Coolant temp sensor 2 | temp_in | M800-B-4 | Analog Temperature Input 2 | temp_in | single_source | |
| OEM-E-10 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-11 | CAN H | can_h | M800-B-23 | CAN Bus High | can_h | single_source | |
| OEM-E-12 | Radiator fan control | low_side_out | M800-A-24 | AUX4 | switch_out | single_source | |
| OEM-E-13 | Multiplex communication | serial | — | — | — | single_source | |
| OEM-E-14 | Fuel tank pressure sensor | analog_in | M800-B-20 | Analog Voltage Input 6 | analog_in | single_source | |
| OEM-E-15 | Electrical load detector | analog_in | M800-B-21 | AV7 | analog_in | single_source | |
| OEM-E-16 | Power steering load detector | analog_in | M800-B-22 | AV8 | analog_in | corroborated | |
| OEM-E-17 | Fuel pump relay | low_side_out | M800-A-18 | AUX1 | switch_out | single_source | |
| OEM-E-18 | A/C clutch relay | low_side_out | M800-A-31 | AUX5 | switch_out | single_source | |
| OEM-E-19 | Evap canister vent shut valve | low_side_out | M800-A-30 | INJ8 | injector_out | single_source | |
| OEM-E-2 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-20 | Secondary O2 sensor | lambda_nb_in | M800-A-17 | Analog Voltage Input 4 | analog_in | single_source | |
| OEM-E-21 | Secondary O2 heater | low_side_out | M800-A-34 | AUX8 | switch_out | single_source | |
| OEM-E-22 | Brake pedal switch | digital_in | — | — | — | single_source | |
| OEM-E-23 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-24 | CAN L | can_l | M800-B-24 | CAN Bus Low | can_l | single_source | |
| OEM-E-25 | Engine speed pulse (tacho) | tacho_out | — | — | — | single_source | |
| OEM-E-26 | Vehicle speed output | tacho_out | — | — | — | single_source | |
| OEM-E-27 | Immobilizer code | — | — | — | — | single_source | |
| OEM-E-28 | A/C switch signal | digital_in | — | — | — | single_source | |
| OEM-E-29 | Service check signal | — | — | — | — | single_source | |
| OEM-E-3 | Logic ground 3 | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | single_source | |
| OEM-E-30 | Write enable signal | — | — | — | — | single_source | |
| OEM-E-31 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-4 | Sensor ground 3 | sensor_ground | — | — | — | corroborated | |
| OEM-E-5 | Sensor voltage 3 | vref | — | — | — | corroborated | |
| OEM-E-6 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-7 | Main relay control | low_side_out | M800-A-1 | AUX2 | switch_out | single_source | |
| OEM-E-8 | A/F sensor heater relay | low_side_out | M800-A-32 | AUX6 | switch_out | single_source | |
| OEM-E-9 | Ignition signal | digital_in | — | — | — | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-2 | SP-14V-1 | 0.85 | no route | Ignition power 2 | — | |
| W2 | OEM-A-3 | SP-14V-1 | 0.85 | no route | Ignition power 1 | — | |
| W3 | SP-14V-1 | M800-A-26 | 0.85 | no route | VBAT Battery Positive | — | |
| W4 | OEM-A-4 | SP-GND-1 | 0.85 | no route | Power ground 2 | — | |
| W5 | OEM-A-5 | SP-GND-1 | 0.85 | no route | Power ground 1 | — | |
| W6 | OEM-A-8 | SP-GND-1 | 0.85 | no route | Logic ground 2 | — | |
| W7 | OEM-A-9 | SP-GND-1 | 0.85 | no route | Logic ground 1 | — | |
| W8 | OEM-E-3 | SP-GND-1 | 0.85 | no route | Logic ground 3 | — | |
| W9 | SP-GND-1 | M800-A-10 | 0.85 | no route | GND Battery Negative | — | |
| W10 | SP-GND-1 | M800-A-11 | 0.85 | no route | GND Battery Negative | — | |
| W11 | OEM-A-24 | SP-0V-1 | 0.5 | no route | Sensor ground 1 | — | |
| W12 | SP-0V-1 | M800-B-14 | 0.5 | no route | 0V Comms Reference | — | |
| W13 | SP-0V-1 | M800-B-15 | 0.5 | no route | 0V Auxiliary Sensor Supply | — | |
| W14 | SP-0V-1 | M800-B-16 | 0.5 | no route | 0V Engine Sensor Supply | — | |
| W15 | OEM-A-7 | M800-B-1 | 0.5 | no route | Crank position sensor (T1) | — | |
| W16 | OEM-A-6 | M800-B-2 | 0.5 | no route | Cam position sensor (T2) | — | |
| W17 | OEM-A-16 | M800-A-3 | 0.5 | no route | Ignition coil 1 | — | |
| W18 | OEM-A-15 | M800-A-4 | 0.5 | no route | Ignition coil 2 | — | |
| W19 | OEM-A-14 | M800-A-5 | 0.5 | no route | Ignition coil 3 | — | |
| W20 | OEM-A-13 | M800-A-6 | 0.5 | no route | Ignition coil 4 | — | |
| W21 | OEM-B-5 | M800-A-19 | 0.5 | no route | Injector 1 | — | |
| W22 | OEM-B-4 | M800-A-20 | 0.5 | no route | Injector 2 | — | |
| W23 | OEM-B-3 | M800-A-21 | 0.5 | no route | Injector 3 | — | |
| W24 | OEM-B-2 | M800-A-22 | 0.5 | no route | Injector 4 | — | |
| W25 | OEM-E-17 | M800-A-18 | 0.5 | no route | Fuel pump relay | — | |
| W26 | OEM-E-7 | M800-A-1 | 0.5 | no route | Main relay control | — | |
| W27 | OEM-E-12 | M800-A-24 | 0.5 | no route | Radiator fan control | — | |
| W28 | OEM-E-18 | M800-A-31 | 0.5 | no route | A/C clutch relay | — | |
| W29 | OEM-E-8 | M800-A-32 | 0.5 | no route | A/F sensor heater relay | — | |
| W30 | OEM-B-6 | M800-A-33 | 0.5 | no route | VTEC solenoid | — | |
| W31 | OEM-E-21 | M800-A-34 | 0.5 | no route | Secondary O2 heater | — | |
| W32 | OEM-B-15 | M800-A-27 | 0.5 | no route | Engine mount control solenoid | — | |
| W33 | OEM-B-18 | M800-A-28 | 0.5 | no route | Alternator control | — | |
| W34 | OEM-B-21 | M800-A-29 | 0.5 | no route | Evap canister purge valve | — | |
| W35 | OEM-E-19 | M800-A-30 | 0.5 | no route | Evap canister vent shut valve | — | |
| W36 | OEM-A-30 | M800-A-14 | 0.5 | no route | MAP sensor | — | |
| W37 | OEM-E-20 | M800-A-17 | 0.5 | no route | Secondary O2 sensor | — | |
| W38 | OEM-B-8 | M800-B-3 | 0.5 | no route | Coolant temp sensor | — | |
| W39 | OEM-E-1 | M800-B-4 | 0.5 | no route | Coolant temp sensor 2 | — | |
| W40 | OEM-B-17 | M800-B-5 | 0.5 | no route | Intake air temp sensor | — | |
| W41 | OEM-B-13 | M800-A-25 | 0.5 | no route | Alternator FR signal | — | |
| W42 | OEM-E-14 | M800-B-20 | 0.5 | no route | Fuel tank pressure sensor | — | |
| W43 | OEM-E-15 | M800-B-21 | 0.5 | no route | Electrical load detector | — | |
| W44 | OEM-E-16 | M800-B-22 | 0.5 | no route | Power steering load detector | — | |
| W45 | OEM-A-18 | M800-B-8 | 0.5 | no route | Vehicle speed sensor | — | |
| W46 | OEM-B-11 | M800-B-9 | 0.5 | no route | VTEC oil pressure switch | — | |
| W47 | OEM-D-1 | M800-B-10 | 0.5 | no route | Cruise set switch | — | |
| W48 | OEM-D-4 | M800-B-11 | 0.5 | no route | Cruise main switch | — | |
| W49 | OEM-E-11 | M800-B-23 | 0.5 | no route | CAN H | — | |
| W50 | OEM-E-24 | M800-B-24 | 0.5 | no route | CAN L | — | |
| W51 | OEM-A-21 | SP-5V-1 | 0.5 | no route | Sensor voltage 1 | — | |
| W52 | SP-5V-1 | M800-A-9 | 0.5 | no route | 5V Auxiliary Sensor Supply | — | |
| W53 | SP-5V-1 | TPS-J-VCC | 0.5 | no route | 5V supply in | — | |
| W54 | TPS-J-SIG | M800-A-16 | 0.5 | no route | Throttle position signal | — | |
| W55 | TPS-J-GND | SP-0V-1 | 0.5 | no route | Sensor ground | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | S2K-0609-ECU-A | Honda | S2000 2006–09 ECU plug A (P/N unknown) | 1.000 | ea |
| connector | S2K-0609-ECU-B | Honda | S2000 2006–09 ECU plug B (P/N unknown) | 1.000 | ea |
| connector | S2K-0609-ECU-D | Honda | S2000 2006–09 ECU plug D (P/N unknown) | 1.000 | ea |
| connector | S2K-0609-ECU-E | Honda | S2000 2006–09 ECU plug E (P/N unknown) | 1.000 | ea |
| connector | TPS-3W | Generic | 3-way throttle position sensor plug (match to your throttle body) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (25)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | LOAD_UNKNOWN | M800-A-1 | M800-A-1 "AUX2" drives OEM-E-7 Main relay control (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-18 | M800-A-18 "AUX1" drives OEM-E-17 Fuel pump relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-19 | M800-A-19 "INJ1" drives OEM-B-5 Injector 1 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-20 | M800-A-20 "INJ2" drives OEM-B-4 Injector 2 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-21 | M800-A-21 "INJ3" drives OEM-B-3 Injector 3 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-22 | M800-A-22 "INJ4" drives OEM-B-2 Injector 4 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-24 | M800-A-24 "AUX4" drives OEM-E-12 Radiator fan control (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-31 | M800-A-31 "AUX5" drives OEM-E-18 A/C clutch relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-32 | M800-A-32 "AUX6" drives OEM-E-8 A/F sensor heater relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | M800-A-33 | M800-A-33 "AUX7" drives OEM-B-6 VTEC solenoid (load 1.0 A) but its current rating is unknown. Check the ECU manual. |
| info | NET_FAMILY | OEM-B-15 ↔ M800-A-27 | OEM-B-15 "Engine mount control solenoid" [low_side_out] is wired to M800-A-27 "INJ5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-18 ↔ M800-A-28 | OEM-B-18 "Alternator control" [low_side_out] is wired to M800-A-28 "INJ6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-21 ↔ M800-A-29 | OEM-B-21 "Evap canister purge valve" [low_side_out] is wired to M800-A-29 "INJ7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-6 ↔ M800-A-33 | OEM-B-6 "VTEC solenoid" [high_side_out] is wired to M800-A-33 "AUX7" [switch_out]. Configure this output as high side. |
| info | NET_FAMILY | OEM-E-12 ↔ M800-A-24 | OEM-E-12 "Radiator fan control" [low_side_out] is wired to M800-A-24 "AUX4" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E-17 ↔ M800-A-18 | OEM-E-17 "Fuel pump relay" [low_side_out] is wired to M800-A-18 "AUX1" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E-18 ↔ M800-A-31 | OEM-E-18 "A/C clutch relay" [low_side_out] is wired to M800-A-31 "AUX5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E-19 ↔ M800-A-30 | OEM-E-19 "Evap canister vent shut valve" [low_side_out] is wired to M800-A-30 "INJ8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E-21 ↔ M800-A-34 | OEM-E-21 "Secondary O2 heater" [low_side_out] is wired to M800-A-34 "AUX8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E-7 ↔ M800-A-1 | OEM-E-7 "Main relay control" [low_side_out] is wired to M800-A-1 "AUX2" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E-8 ↔ M800-A-32 | OEM-E-8 "A/F sensor heater relay" [low_side_out] is wired to M800-A-32 "AUX6" [switch_out]. Configure this output as low side. |
| info | PIN_UNSOURCED | TPS-J-GND | TPS-J-GND "Sensor ground" has no recorded source. |
| info | PIN_UNSOURCED | TPS-J-SIG | TPS-J-SIG "Throttle position signal" has no recorded source. |
| info | PIN_UNSOURCED | TPS-J-VCC | TPS-J-VCC "5V supply in" has no recorded source. |
| info | UNMAPPED | OEM | 19 optional OEM pins are not mapped: OEM-A-1 Knock sensor; OEM-A-10 A/F sensor heater; OEM-A-28 A/F sensor signal −; OEM-A-31 A/F sensor signal +; OEM-B-10 Alternator L signal; OEM-B-19 Throttle actuator command to throttle control module (SEFD); OEM-B-20 Throttle actuator command to throttle control module (SEDF); OEM-D-15 Throttle actuator relay; OEM-D-7 Cruise resume switch; OEM-D-8 Brake pedal position switch; OEM-D-9 Cruise clutch signal; OEM-E-13 Multiplex communication; OEM-E-22 Brake pedal switch; OEM-E-25 Engine speed pulse (tacho); OEM-E-26 Vehicle speed output; OEM-E-27 Immobilizer code; OEM-E-28 A/C switch signal; OEM-E-29 Service check signal; OEM-E-30 Write enable signal |
Accepted (7)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-A-20 | DBW removed: accelerator pedal dropped (its signal, 5 V supply and sensor ground are no longer needed). | mapping-proposal |
| REQUIRED_UNMAPPED | OEM-A-23 | DBW removed: accelerator pedal dropped (its signal, 5 V supply and sensor ground are no longer needed). | mapping-proposal |
| REQUIRED_UNMAPPED | OEM-A-25 | DBW removed: accelerator pedal dropped (its signal, 5 V supply and sensor ground are no longer needed). | mapping-proposal |
| REQUIRED_UNMAPPED | OEM-A-26 | DBW removed: accelerator pedal dropped (its signal, 5 V supply and sensor ground are no longer needed). | mapping-proposal |
| REQUIRED_UNMAPPED | OEM-E-4 | DBW removed: accelerator pedal dropped (its signal, 5 V supply and sensor ground are no longer needed). | mapping-proposal |
| REQUIRED_UNMAPPED | OEM-E-5 | DBW removed: accelerator pedal dropped (its signal, 5 V supply and sensor ground are no longer needed). | mapping-proposal |
| REQUIRED_UNMAPPED | OEM-E-9 | No ignition-sense input in the M800 library; feed switched ignition to a suitable input. | mapping-proposal |
Notes
No notes.
Sources
| Reliability | Kind | Title | URL |
|---|---|---|---|
| 4 | vendor_doc | AEM 30-6053 Series 2 Plug & Play EMS, 2006–2008 S2000 AP2 (original ECU pinout) | https://documents.aemelectronics.com/techlibrary_30-6053_series_2_plug___play_ems.pdf |
| 4 | service_manual | Honda S2000 Service Manual 2000–2008 (DBW engine control) | https://www.s2000.wiki/view/images/7/7f/Service_Manual_2000-2008.pdf |
| 4 | vendor_doc | MoTeC M400/M600/M800/M880 Manual — Appendix L: Pin list by Function | https://starracecars.com/wp-content/uploads/resources/M400_M600_M800_M880_Manual_A5.pdf |
| 4 | vendor_doc | MoTeC M800 OEM WRX56 Installation | https://motec.com.au |
| 3 | vendor_doc | ScienceofSpeed Link G4X ECU, S2000 2006–09 (product page) | https://www.scienceofspeed.com/s2000-2000-09/scienceofspeed-link-g4x-ecu-s2000-2006-09-enpp-3822.html |