Connectors
MS3PROEVO-A
face not drawn
| Point | Function | Family | Evidence | Destination |
|---|---|---|---|---|
| High current out 1 | Low-side out | single_source | not connected | |
| High current out 2 | Low-side out | single_source | not connected | |
| Injector out J | Injector | single_source | OEM-2-UInjector 1 | |
| Injector out I | Injector | single_source | OEM-2-VInjector 2 | |
| High current out 3 | Low-side out | single_source | not connected | |
| CKP+ | Crank / cam | single_source | OEM-2-ECrank position (CAS NE) | |
| Knock In 2 | Knock | single_source | not connected | |
| 5V+ VREF out | 5V / 8V ref | single_source | OEM-2-K+5V sensor supply | |
| TPS in | Analog in | single_source | not connected | |
| MAT in | Temp in | single_source | OEM-2-QCoolant temperature (ECT) | |
| CLT in | Temp in | single_source | OEM-2-PIntake air temperature (IAT) | |
| Analog In 6 | Analog in | single_source | not connected | |
| Logic Ground | Sensor ground | single_source | SP-0V-1 | |
| PWM / Idle Out 1 | Low-side out | single_source | OEM-1-EMalfunction indicator lamp (MIL) | |
| CKP− | Crank / cam | single_source | SP-0V-1 | |
| Ground Shield Drain | Shield | single_source | not connected | |
| Analog In 7 | Analog in | single_source | not connected | |
| Sensor return | Sensor ground | single_source | SP-0V-1 | |
| Analog in 1 | Analog in | single_source | OEM-2-OAir flow meter (AFM) | |
| Analog in 2 | Analog in | single_source | not connected | |
| Analog in 3 | Analog in | single_source | not connected | |
| Analog In 4 | Analog in | single_source | not connected | |
| Analog In 5 | Analog in | single_source | not connected | |
| Tach out | Tacho out | single_source | OEM-2-ITachometer output | |
| O2 in | O2 narrowband | single_source | OEM-2-NO2 sensor | |
| CMP+ | Crank / cam | single_source | OEM-2-GCam position (CAS G) | |
| CMP− | Crank / cam | single_source | SP-0V-1 | |
| Fuel pump relay out | Low-side out | single_source | not connected | |
| PWM out 2 | Low-side out | single_source | not connected | |
| PWM out 3 | Low-side out | single_source | not connected | |
| Knock in 1 | Knock | single_source | not connected | |
| Digital switched in 1 | Digital in | single_source | OEM-1-CStart signal | |
| CAN L | CAN low | single_source | not connected | |
| CAN H | CAN high | single_source | not connected | |
| 12V+ switched power in | Power in | single_source | SP-14V-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with