Cut list
Lengths need a layout (0 of 29 routed).
| Wire | From / To | Gauge | Signal |
|---|---|---|---|
| W1 | OEM-1-B / SP-14V-1 | 0.85 | ECU power +14V (main relay) |
| W2 | SP-14V-1 / MS3PROMINI-A-1 | 0.85 | 12V+ switched power in |
| W3 | OEM-2-A / SP-GND-1 | 0.85 | Power ground |
| W4 | OEM-2-B / SP-GND-1 | 0.85 | Power ground |
| W5 | OEM-2-C / SP-GND-1 | 0.85 | Power ground |
| W6 | OEM-2-D / SP-GND-1 | 0.85 | Power ground |
| W7 | SP-GND-1 / MS3PROMINI-A-22 | 0.85 | Power ground |
| W8 | SP-GND-1 / MS3PROMINI-A-23 | 0.85 | Power ground |
| W9 | OEM-2-F / SP-0V-1 | 0.5 | AFM ground |
| W10 | SP-0V-1 / MS3PROMINI-A-21 | 0.5 | Sensor ground |
| W11 | OEM-2-K / MS3PROMINI-A-2 | 0.5 | +5V sensor supply |
| W12 | OEM-2-E / MS3PROMINI-A-30 | 0.5 | Crank position (CAS NE) |
| W13 | OEM-2-G / MS3PROMINI-A-32 | 0.5 | Cam position (CAS G) |
| W14 | OEM-1-G / MS3PROMINI-A-17 | 0.5 | Ignition 1 (coils 1+4, wasted spark) |
| W15 | OEM-1-H / MS3PROMINI-A-18 | 0.5 | Ignition 2 (coils 2+3, wasted spark) |
| W16 | OEM-2-U / MS3PROMINI-A-10 | 0.5 | Injector 1 |
| W17 | OEM-2-V / MS3PROMINI-A-11 | 0.5 | Injector 2 |
| W18 | OEM-2-Y / MS3PROMINI-A-12 | 0.5 | Injector 3 |
| W19 | OEM-2-Z / MS3PROMINI-A-5 | 0.5 | Injector 4 |
| W20 | OEM-1-E / MS3PROMINI-A-3 | 0.5 | Malfunction indicator lamp (MIL) |
| W21 | OEM-2-O / MS3PROMINI-A-13 | 0.5 | Air flow meter (AFM) |
| W22 | OEM-2-N / MS3PROMINI-A-14 | 0.5 | O2 sensor |
| W23 | OEM-2-Q / MS3PROMINI-A-26 | 0.5 | Coolant temperature (ECT) |
| W24 | OEM-2-P / MS3PROMINI-A-27 | 0.5 | Intake air temperature (IAT) |
| W25 | OEM-1-C / MS3PROMINI-A-29 | 0.5 | Start signal |
| W26 | OEM-1-N / MS3PROMINI-A-34 | 0.5 | Wide-open throttle switch |
| W27 | OEM-1-P / MS3PROMINI-A-35 | 0.5 | Power steering pressure switch |
| W28 | OEM-1-Q / MS3PROMINI-A-15 | 0.5 | A/C request |
| W29 | OEM-1-V / MS3PROMINI-A-16 | 0.5 | Neutral/clutch switch |
Bill of materials
No parts in this harness.