Connectors
MAXXECUGEN2T-MX1
face not drawn
| Point | Function | Family | Evidence | Destination |
|---|---|---|---|---|
| Ignition 1 | Ignition | single_source | OEM-1-GIgnition 1 (coils 1+4, wasted spark) | |
| Ignition 2 | Ignition | single_source | OEM-1-HIgnition 2 (coils 2+3, wasted spark) | |
| Ignition 3 | Ignition | single_source | not connected | |
| Ignition 4 | Ignition | single_source | not connected | |
| GP out 1 (GND) | Low-side out | single_source | OEM-1-EMalfunction indicator lamp (MIL) | |
| GP out 2 (GND) | Low-side out | single_source | OEM-2-ITachometer output | |
| GP out 3 (GND) | Low-side out | single_source | not connected | |
| GP out 4 (GND) | Low-side out | single_source | not connected | |
| Engine gnd | Ground | single_source | SP-GND-1 | |
| Digital/VR 1 SIGNAL + | Crank / cam | single_source | OEM-2-ECrank position (CAS NE) | |
| Digital/VR 1 SIGNAL - | Shield | single_source | not connected | |
| Digital/VR 1 POWER SUPPLY | 5V / 8V ref | single_source | OEM-2-K+5V sensor supply | |
| Digital/VR 1 SHIELD | Shield | single_source | not connected | |
| SENSOR GND | Sensor ground | single_source | SP-0V-1 | |
| CAN L | CAN low | single_source | not connected | |
| CAN H | CAN high | single_source | not connected | |
| GP out 5 (GND) | Low-side out | single_source | not connected | |
| Digital/VR 2 SIGNAL + | Crank / cam | single_source | OEM-2-GCam position (CAS G) | |
| Digital/VR 2 SIGNAL - | Shield | single_source | not connected | |
| Digital/VR 2 POWER SUPPLY | 5V / 8V ref | single_source | not connected | |
| Digital/VR 2 SHIELD | Shield | single_source | not connected | |
| 5V power supply | 5V / 8V ref | single_source | not connected | |
| Digital/VR 3 SIGNAL + | Digital in | single_source | OEM-1-CStart signal | |
| Digital/VR 4 SIGNAL + | Digital in | single_source | OEM-1-NWide-open throttle switch | |
| 12V supply 1 | Power in | single_source | SP-14V-1 | |
| AIN 1 | Analog in | single_source | OEM-2-OAir flow meter (AFM) | |
| AIN 2 | Analog in | single_source | OEM-2-NO2 sensor | |
| AIN 3 | Analog in | single_source | OEM-2-QCoolant temperature (ECT) | |
| AIN 4 | Analog in | single_source | OEM-2-PIntake air temperature (IAT) | |
| AIN 5 | Analog in | single_source | OEM-1-VNeutral/clutch switch | |
| INJECTOR 1 | Injector | single_source | OEM-2-UInjector 1 | |
| INJECTOR 2 | Injector | single_source | OEM-2-VInjector 2 | |
| INJECTOR 3 | Injector | single_source | OEM-2-YInjector 3 | |
| INJECTOR 4 | Injector | single_source | OEM-2-ZInjector 4 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with