Connectors
EMUBLACK-Black
face not drawn
| Point | Function | Family | Evidence | Destination |
|---|---|---|---|---|
| Ignition coil #5 | Ignition | single_source | not connected | |
| EGT in #1 | No data | single_source | not connected | |
| Knock Sensor in #1 | Knock | single_source | OEM-A-9Knock sensor (KS) | |
| Analog In #2 | Analog in | single_source | OEM-E-2Secondary heated O2 sensor (SHO2S) | |
| CLT In | Temp in | single_source | OEM-B-17Intake air temp sensor (IAT) | |
| WBO Vs | Wideband Vs | single_source | OEM-A-16A/F sensor - (AFS-, wideband Vs) | |
| Camsync In #2 | Crank / cam | single_source | OEM-A-26Camshaft position B (CMP B) | |
| Primary trigger | Crank / cam | single_source | OEM-A-7Crank position sensor (CKP) | |
| Flex Fuel In | Analog in | single_source | OEM-E-14Fuel tank pressure sensor (FTP) | |
| Switch #1 In | Digital in | single_source | OEM-B-10Alternator L signal (ALTL) | |
| RS232 TXD | No data | single_source | not connected | |
| CAN H | CAN high | single_source | not connected | |
| Battery +12V | Power in | single_source | SP-14V-1 | |
| Ignition coil #4 | Ignition | single_source | OEM-A-27Ignition coil 4 (IGPLS4) | |
| EGT in #2 | No data | single_source | not connected | |
| Knock Sensor in #2 | Knock | single_source | not connected | |
| Analog In #3 | Analog in | single_source | OEM-B-13Alternator FR signal (ALTF) | |
| TPS In | Analog in | single_source | OEM-A-15Throttle position sensor (TPS) | |
| WBO Ip | Wideband Ip | single_source | OEM-A-6A/F sensor + (AFS+, wideband Ip) | |
| VSS In | Digital in | single_source | OEM-A-18Vehicle speed sensor (VSS, M/T) | |
| Camsync In #1 | Crank / cam | single_source | OEM-A-25Camshaft position A (CMP A) | |
| WBO Rcal | Wideband cal | single_source | not connected | |
| Switch #2 In | Digital in | single_source | OEM-B-9VTEC oil pressure switch (VTPSW) | |
| RS232 RXD | No data | single_source | not connected | |
| CAN L | CAN low | single_source | not connected | |
| +5V supply | 5V / 8V ref | single_source | OEM-A-20Sensor 5V supply 2 (VCC2) | |
| Power Ground | Ground | single_source | SP-GND-1 | |
| Ecu Ground | Ground | single_source | SP-GND-1 | |
| Sensor Ground | Sensor ground | single_source | SP-0V-1 | |
| Analog In #4 | Analog in | single_source | OEM-E-15Electrical load detector (ELD) | |
| Analog In #1 | Analog in | single_source | OEM-A-19Manifold absolute pressure (MAP) | |
| IAT In | Temp in | single_source | OEM-B-8Coolant temp sensor (ECT) | |
| WBO VGND | Wideband Vgnd | single_source | not connected | |
| +5V supply | 5V / 8V ref | single_source | OEM-A-21Sensor 5V supply 1 (VCC1) | |
| Analog In #5 | Analog in | single_source | OEM-E-20Brake switch / interlock (2WBS) | |
| Switch #3 In | Digital in | single_source | OEM-E-16Power steering pressure switch (PSPSW) | |
| Analog In #6 | Analog in | single_source | OEM-E-22Brake switch (BKSW) | |
| Sensor Ground | Sensor ground | single_source | SP-0V-1 | |
| Sensor Ground | Sensor ground | single_source | SP-0V-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with