Connectors
S2K-AOEMbeing replaced
View side not yet checked against the FSM. Verify before trusting the mirror.
| Point | Function | Family | Evidence | Destination |
|---|---|---|---|---|
| Knock sensor | Knock | single_source | SL8-B-16Knock 1 + | |
| Ignition power 2 | Power in | single_source | SP-14V-1 | |
| Ignition power 1 | Power in | single_source | SP-14V-1 | |
| Power ground 2 | Ground | single_source | SP-GND-1 | |
| Power ground 1 | Ground | single_source | SP-GND-1 | |
| Cam position sensor (T2) | Crank / cam | single_source | SL8-B-7Sync sensor + | |
| Crank position sensor (T1) | Crank / cam | single_source | SL8-B-5Crank index sensor + | |
| Logic ground 2 | Ground | single_source | SP-GND-1 | |
| Logic ground 1 | Ground | single_source | SP-GND-1 | |
| A/F sensor heater | Low-side out | single_source | not connected | |
| Ignition coil 4 | Ignition | single_source | SL8-A-29Ignition channel 4 | |
| Ignition coil 3 | Ignition | single_source | SL8-A-28Ignition channel 3 | |
| Ignition coil 2 | Ignition | single_source | SL8-A-27Ignition channel 2 | |
| Ignition coil 1 | Ignition | single_source | SL8-A-26Ignition channel 1 | |
| Vehicle speed sensor | Digital in | single_source | SL8-A-20Digital input 1 | |
| Sensor voltage 2 | 5V / 8V ref | corroborated | SP-5V-1 | |
| Sensor voltage 1 | 5V / 8V ref | single_source | SP-5V-1 | |
| Sensor ground 2 | Sensor ground | corroborated | SP-0V-1 | |
| Sensor ground 1 | Sensor ground | single_source | SP-0V-1 | |
| Accelerator pedal position B | Analog in | corroborated | not connected | |
| Accelerator pedal position A | Analog in | corroborated | not connected | |
| A/F sensor signal − | No data | single_source | not connected | |
| MAP sensor | Analog in | single_source | SL8-B-11Analog input 1 | |
| A/F sensor signal + | No data | single_source | not connected |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with