Connectors
MAXXECUMINI-C1
face not drawn
| Point | Function | Family | Evidence | Destination |
|---|---|---|---|---|
| TRIGGER | Crank / cam | single_source | OEM-A-7Crank position sensor (CKP) | |
| TRIGGER GND | Sensor ground | single_source | SP-0V-1 | |
| DIN 1 (Hall only) | Digital in | single_source | OEM-A-18Neutral position switch (NC) | |
| DIN 2 (Hall only) | Digital in | single_source | OEM-B-10Alternator L signal (ALTL) | |
| SENSOR GND | Sensor ground | single_source | SP-0V-1 | |
| SENSOR GND | Sensor ground | single_source | SP-0V-1 | |
| CLT | Temp in | single_source | OEM-B-8Coolant temp sensor (ECT) | |
| IAT | Temp in | single_source | OEM-B-17Intake air temp sensor (IAT) | |
| AIN 3 (0-5V) | Analog in | single_source | OEM-A-30Manifold absolute pressure (MAP) | |
| AIN 4 (0-5V) | Analog in | single_source | OEM-E-20Secondary heated O2 sensor (SHO2S) | |
| GPO 8/TACHO | Low-side out | single_source | OEM-E-18A/C clutch relay (ACC) | |
| TPS | Analog in | single_source | OEM-A-29Throttle position sensor (TPS) | |
| GND Shield | Shield | single_source | not connected | |
| SENSOR GND | Sensor ground | single_source | SP-0V-1 | |
| GPO 3 | Low-side out | single_source | OEM-E-17Immobilizer fuel pump relay (IMO FPR) | |
| +5V sensor supply | 5V / 8V ref | single_source | OEM-A-20Sensor 5V supply 2 (VCC2) | |
| CAN L | CAN low | single_source | not connected | |
| CAN H | CAN high | single_source | not connected | |
| IGN 1 | Ignition | single_source | OEM-A-16Ignition coil 1 (IGPLS1) | |
| IGN 2 | Ignition | single_source | OEM-A-15Ignition coil 2 (IGPLS2) | |
| IGN 3 | Ignition | single_source | OEM-A-14Ignition coil 3 (IGPLS3) | |
| IGN 4 | Ignition | single_source | OEM-A-13Ignition coil 4 (IGPLS4) | |
| GPO 2 | Low-side out | single_source | OEM-E-12Radiator fan control (FANC) | |
| GPO 1 | Low-side out | single_source | OEM-E-8Main relay control (MRLY) | |
| INJ 1 | Injector | single_source | OEM-B-5Injector 1 (INJ1) | |
| ENGINE GND | Ground | single_source | SP-GND-1 | |
| INJ 2 | Injector | single_source | OEM-B-4Injector 2 (INJ2) | |
| INJ 3 | Injector | single_source | OEM-B-3Injector 3 (INJ3) | |
| INJ 4 | Injector | single_source | OEM-B-2Injector 4 (INJ4) | |
| +12V (ECU power supply) | Power in | single_source | SP-14V-1 |
Mates
No mated connectors (e.g. OEM plug ↔ adapter header).
mates with