BMW 3 Series E46 1998–2006 (M54) → Link G4X FuryX 122-4000 (auto)
BMW 3 Series E46 1998–2006 (M54) — Link — G4X FuryX
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-08
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 75 wires · 12 connectors · 1 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | G4XFURYX-A-A5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | G4XFURYX-B-B5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-X60001-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-X60001-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-X60001-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-X60005-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | G4XFURYX-A-A25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | G4XFURYX-A-A34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | G4XFURYX-B-B25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | G4XFURYX-B-B34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-X60002-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-X60002-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-X60002-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X60002-24 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X60003-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X60003-17 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X60003-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X60003-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X60003-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X60003-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X60003-25 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-X60003-28 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-X60004-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-X60004-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | G4XFURYX-A-A24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-0V-1 | G4XFURYX-B-B22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-X60003-7 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-X60004-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-X60004-9 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | SP-5V1-1 | G4XFURYX-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X60003-8 | G4XFURYX-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X60003-2 | G4XFURYX-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X60003-5 | G4XFURYX-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X60003-29 | G4XFURYX-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X60003-30 | G4XFURYX-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X60005-3 | G4XFURYX-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X60005-2 | G4XFURYX-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X60005-1 | G4XFURYX-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X60005-9 | G4XFURYX-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X60005-8 | G4XFURYX-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X60005-7 | G4XFURYX-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X60003-33 | G4XFURYX-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X60003-34 | G4XFURYX-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X60003-35 | G4XFURYX-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X60003-36 | G4XFURYX-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X60003-37 | G4XFURYX-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X60003-38 | G4XFURYX-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X60003-48 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | SP-SHD-1 | G4XFURYX-A-A7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X60003-43 | G4XFURYX-B-B18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-X60003-44 | G4XFURYX-B-B26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X60001-1 | G4XFURYX-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X60002-23 | G4XFURYX-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X60004-10 | G4XFURYX-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X60002-1 | G4XFURYX-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X60002-13 | G4XFURYX-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X60002-19 | G4XFURYX-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X60002-7 | G4XFURYX-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X60003-40 | G4XFURYX-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-X60003-41 | G4XFURYX-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-X60003-42 | G4XFURYX-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-X60003-1 | G4XFURYX-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-X60003-19 | G4XFURYX-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-X60004-8 | G4XFURYX-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-X60003-10 | G4XFURYX-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-X60004-13 | G4XFURYX-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-X60002-14 | G4XFURYX-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-X60002-15 | G4XFURYX-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-X60002-16 | G4XFURYX-B-B23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-X60002-18 | G4XFURYX-B-B24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-X60003-24 | G4XFURYX-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-X60003-22 | G4XFURYX-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-X60003-27 | G4XFURYX-B-B6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | G4XFURYX-A-A5 | G4XFURYX-A-A24 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | G4XFURYX-A-A24 | G4XFURYX-A-A32 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 3 | G4XFURYX-A-A25 | G4XFURYX-A-A32 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | G4XFURYX-A-A25 | G4XFURYX-A-A5 | open (OL) | power ground must not touch +12 V supply | |
| 5 | G4XFURYX-A-A5 | G4XFURYX-A-A32 | open (OL) | +12 V supply must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G4XFURYX-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injector 4 | — | W47 | — | 0.5 | OEM-X60003-36 | — | — | — |
| A10 | Ignition 4 | — | W41 | — | 0.5 | OEM-X60005-9 | — | — | — |
| A11 | Ignition 3 | — | W40 | — | 0.5 | OEM-X60005-1 | — | — | — |
| A12 | Ignition 2 | — | W39 | — | 0.5 | OEM-X60005-2 | — | — | — |
| A13 | Ignition 1 | — | W38 | — | 0.5 | OEM-X60005-3 | — | — | — |
| A14 | Analog Volt 4 | — | W67 | — | 0.5 | OEM-X60003-10 | — | — | — |
| A15 | Analog Temp 1 | — | W73 | — | 0.5 | OEM-X60003-24 | — | — | — |
| A16 | Analog Temp 2 | — | W74 | — | 0.5 | OEM-X60003-22 | — | — | — |
| A17 | Analog Volt 1 | — | W64 | — | 0.5 | OEM-X60003-1 | — | — | — |
| A18 | Aux 4 | — | W57 | — | 0.5 | OEM-X60002-1 | — | — | — |
| A19 | Aux 3 | — | W56 | — | 0.5 | OEM-X60004-10 | — | — | — |
| A2 | Injector 3 | — | W46 | — | 0.5 | OEM-X60003-35 | — | — | — |
| A20 | Aux 2 | — | W55 | — | 0.5 | OEM-X60002-23 | — | — | — |
| A21 | Aux 1 | — | W54 | — | 0.5 | OEM-X60001-1 | — | — | — |
| A22 | Analog Volt 2 | — | W65 | — | 0.5 | OEM-X60003-19 | — | — | — |
| A23 | Digital Input 3 | — | — | — | — | — | — | — | — |
| A24 | Sensor Ground | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| A25 | System Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| A26 | Aux 8 | — | W61 | — | 0.5 | OEM-X60003-40 | — | — | — |
| A27 | Aux 7 | — | W60 | — | 0.5 | OEM-X60002-7 | — | — | — |
| A28 | Aux 6 | — | W59 | — | 0.5 | OEM-X60002-19 | — | — | — |
| A29 | Aux 5 | — | W58 | — | 0.5 | OEM-X60002-13 | — | — | — |
| A3 | Injector 2 | — | W45 | — | 0.5 | OEM-X60003-34 | — | — | — |
| A30 | Digital Input 1 | — | W35 | — | 0.5 | OEM-X60003-5 | — | — | — |
| A31 | Digital Input 2 | — | — | — | — | — | — | — | — |
| A32 | +5V Out | — | W32 | — | 0.5 | SP-5V1-1 | — | — | — |
| A33 | Analog Volt 3 | — | W66 | — | 0.5 | OEM-X60004-8 | — | — | — |
| A34 | System Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| A4 | Injector 1 | — | W44 | — | 0.5 | OEM-X60003-33 | — | — | — |
| A5 | +14V ECU Power | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| A6 | +8V Out | — | — | — | — | — | — | — | — |
| A7 | Shield Ground | — | W51 | — | 0.5 | SP-SHD-1 | — | — | — |
| A8 | Trigger 1 | — | W33 | — | 0.5 | OEM-X60003-8 | — | — | — |
| A9 | Trigger 2 | — | W34 | — | 0.5 | OEM-X60003-2 | — | — | — |
G4XFURYX-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injector 8 | — | W63 | — | 0.5 | OEM-X60003-42 | — | — | — |
| B10 | WBO Heater | — | — | — | — | — | — | — | — |
| B11 | WBO MES | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | W43 | — | 0.5 | OEM-X60005-7 | — | — | — |
| B13 | Ignition 5 | — | W42 | — | 0.5 | OEM-X60005-8 | — | — | — |
| B14 | WBO RE | — | — | — | — | — | — | — | — |
| B15 | Analog Volt 6 | — | W69 | — | 0.5 | OEM-X60002-14 | — | — | — |
| B16 | Analog Volt 7 | — | W70 | — | 0.5 | OEM-X60002-15 | — | — | — |
| B17 | Shield Ground | — | — | — | — | — | — | — | — |
| B18 | Aux 9 | — | W52 | — | 0.5 | OEM-X60003-43 | — | — | — |
| B19 | Digital Input 6 | — | — | — | — | — | — | — | — |
| B2 | Injector 7 | — | W62 | — | 0.5 | OEM-X60003-41 | — | — | — |
| B20 | Digital Input 5 | — | — | — | — | — | — | — | — |
| B21 | Digital Input 4 | — | — | — | — | — | — | — | — |
| B22 | Sensor Ground | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| B23 | Analog Volt 8 | — | W71 | — | 0.5 | OEM-X60002-16 | — | — | — |
| B24 | Analog Volt 9 | — | W72 | — | 0.5 | OEM-X60002-18 | — | — | — |
| B25 | System Ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| B26 | Aux 10 | — | W53 | — | 0.5 | OEM-X60003-44 | — | — | — |
| B27 | CAN 2 H | — | — | — | — | — | — | — | — |
| B28 | CAN 2 L | — | — | — | — | — | — | — | — |
| B29 | Digital Input 8 | — | — | — | — | — | — | — | — |
| B3 | Injector 6 | — | W49 | — | 0.5 | OEM-X60003-38 | — | — | — |
| B30 | Digital Input 7 | — | — | — | — | — | — | — | — |
| B31 | WBO IPE | — | — | — | — | — | — | — | — |
| B32 | WBO APE | — | — | — | — | — | — | — | — |
| B33 | Analog Volt 5 | — | W68 | — | 0.5 | OEM-X60004-13 | — | — | — |
| B34 | System Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| B4 | Injector 5 | — | W48 | — | 0.5 | OEM-X60003-37 | — | — | — |
| B5 | Aux 9/10 E-Throttle Supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| B6 | Analog Temp 3 | — | W75 | — | 0.5 | OEM-X60003-27 | — | — | — |
| B7 | Analog Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W37 | — | 0.5 | OEM-X60003-30 | — | — | — |
| B9 | Knock 1 | — | W36 | — | 0.5 | OEM-X60003-29 | — | — | — |
OEM-X60001
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector/unloader relay control (terminal 15) | — | W54 | — | 0.5 | G4XFURYX-A-A21 | — | — | — |
| 4 | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Battery constant (terminal 30) | — | — | — | — | — | — | — | — |
| 8 | ECU main power (terminal 87 via main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Voltage supply (injector / fuse carrier) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
OEM-X60002
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | O2 sensor heater, bank 1 pre-cat | — | W57 | — | 0.5 | G4XFURYX-A-A18 | — | — | — |
| 13 | O2 sensor heater, bank 2 pre-cat | — | W58 | — | 0.5 | G4XFURYX-A-A29 | — | — | — |
| 14 | O2 sensor signal, bank 1 pre-cat | — | W69 | — | 0.5 | G4XFURYX-B-B15 | — | — | — |
| 15 | O2 sensor signal, bank 2 pre-cat | — | W70 | — | 0.5 | G4XFURYX-B-B16 | — | — | — |
| 16 | O2 sensor signal, bank 1 post-cat | — | W71 | — | 0.5 | G4XFURYX-B-B23 | — | — | — |
| 18 | O2 sensor signal, bank 2 post-cat | — | W72 | — | 0.5 | G4XFURYX-B-B24 | — | — | — |
| 19 | O2 sensor heater, bank 2 post-cat | — | W59 | — | 0.5 | G4XFURYX-A-A28 | — | — | — |
| 20 | O2 sensor ground, bank 1 pre-cat | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | O2 sensor ground, bank 2 pre-cat | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | O2 sensor ground, bank 1 post-cat | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Main relay control | — | W55 | — | 0.5 | G4XFURYX-A-A20 | — | — | — |
| 24 | O2 sensor ground, bank 2 post-cat | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | O2 sensor heater, bank 1 post-cat | — | W60 | — | 0.5 | G4XFURYX-A-A27 | — | — | — |
OEM-X60003
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Mass air flow (MAF) signal | — | W64 | — | 0.5 | G4XFURYX-A-A17 | — | — | — |
| 10 | Throttle position sensor 2 | — | W67 | — | 0.5 | G4XFURYX-A-A14 | — | — | — |
| 15 | Exhaust camshaft ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | MAF ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Intake camshaft ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Throttle position sensor 1 | — | W65 | — | 0.5 | G4XFURYX-A-A22 | — | — | — |
| 2 | Exhaust camshaft position | — | W34 | — | 0.5 | G4XFURYX-A-A9 | — | — | — |
| 20 | Throttle ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Crankshaft ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Intake air temperature (IAT) | — | W74 | — | 0.5 | G4XFURYX-A-A16 | — | — | — |
| 23 | IAT ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Engine coolant temperature (ECT) | — | W73 | — | 0.5 | G4XFURYX-A-A15 | — | — | — |
| 25 | ECT ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 27 | Engine oil temperature | — | W75 | — | 0.5 | G4XFURYX-B-B6 | — | — | — |
| 28 | Oil temperature ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 29 | Knock sensor, cylinders 1-3 (A) | — | W36 | — | 0.5 | G4XFURYX-B-B9 | — | — | — |
| 30 | Knock sensor, cylinders 1-3 (B) | — | W37 | — | 0.5 | G4XFURYX-B-B8 | — | — | — |
| 31 | Knock sensor, cylinders 4-6 (A) | — | — | — | — | — | — | — | — |
| 32 | Knock sensor, cylinders 4-6 (B) | — | — | — | — | — | — | — | — |
| 33 | Injector cylinder 1 | — | W44 | — | 0.5 | G4XFURYX-A-A4 | — | — | — |
| 34 | Injector cylinder 2 | — | W45 | — | 0.5 | G4XFURYX-A-A3 | — | — | — |
| 35 | Injector cylinder 3 | — | W46 | — | 0.5 | G4XFURYX-A-A2 | — | — | — |
| 36 | Injector cylinder 4 | — | W47 | — | 0.5 | G4XFURYX-A-A1 | — | — | — |
| 37 | Injector cylinder 5 | — | W48 | — | 0.5 | G4XFURYX-B-B4 | — | — | — |
| 38 | Injector cylinder 6 | — | W49 | — | 0.5 | G4XFURYX-B-B3 | — | — | — |
| 40 | VANOS intake solenoid | — | W61 | — | 0.5 | G4XFURYX-A-A26 | — | — | — |
| 41 | VANOS exhaust solenoid | — | W62 | — | 0.5 | G4XFURYX-B-B2 | — | — | — |
| 42 | Evap purge valve | — | W63 | — | 0.5 | G4XFURYX-B-B1 | — | — | — |
| 43 | Throttle motor drive 1 (H-bridge) | — | W52 | — | 0.5 | G4XFURYX-B-B18 | — | — | — |
| 44 | Throttle motor drive 2 (H-bridge) | — | W53 | — | 0.5 | G4XFURYX-B-B26 | — | — | — |
| 45 | Map-controlled thermostat | — | — | — | — | — | — | — | — |
| 46 | Idle speed control, close | — | — | — | — | — | — | — | — |
| 47 | Idle speed control, open | — | — | — | — | — | — | — | — |
| 48 | Knock sensor shield | — | W50 | — | 0.5 | SP-SHD-1 | — | — | — |
| 49 | DISA intake flap | — | — | — | — | — | — | — | — |
| 5 | Intake camshaft position | — | W35 | — | 0.5 | G4XFURYX-A-A30 | — | — | — |
| 7 | Throttle body +5V supply | — | W29 | — | 0.5 | SP-5V1-1 | — | — | — |
| 8 | Crankshaft position | — | W33 | — | 0.5 | G4XFURYX-A-A8 | — | — | — |
OEM-X60004
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Fuel pump relay control | — | W56 | — | 0.5 | G4XFURYX-A-A19 | — | — | — |
| 12 | Pedal ground 2 | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | Pedal position signal 2 | — | W68 | — | 0.5 | G4XFURYX-B-B33 | — | — | — |
| 14 | Pedal +5V supply 2 | — | W30 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | Pedal ground 1 | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Pedal position signal 1 | — | W66 | — | 0.5 | G4XFURYX-A-A33 | — | — | — |
| 9 | Pedal +5V supply 1 | — | W31 | — | 0.5 | SP-5V1-1 | — | — | — |
OEM-X60005
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil 3 | — | W40 | — | 0.5 | G4XFURYX-A-A11 | — | — | — |
| 2 | Ignition coil 2 | — | W39 | — | 0.5 | G4XFURYX-A-A12 | — | — | — |
| 3 | Ignition coil 1 | — | W38 | — | 0.5 | G4XFURYX-A-A13 | — | — | — |
| 5 | Ignition ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Ignition coil 6 | — | W43 | — | 0.5 | G4XFURYX-B-B12 | — | — | — |
| 8 | Ignition coil 5 | — | W42 | — | 0.5 | G4XFURYX-B-B13 | — | — | — |
| 9 | Ignition coil 4 | — | W41 | — | 0.5 | G4XFURYX-A-A10 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | OEM-X60002-20 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-X60002-21 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-X60002-22 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-X60002-24 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-X60003-15 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X60003-17 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X60003-18 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X60003-20 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X60003-21 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-X60003-23 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-X60003-25 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-X60003-28 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | OEM-X60004-12 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | OEM-X60004-7 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | G4XFURYX-A-A24 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | G4XFURYX-B-B22 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X60001-8 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X60001-9 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | G4XFURYX-A-A5 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | G4XFURYX-B-B5 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W29 | — | 0.5 | OEM-X60003-7 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | OEM-X60004-14 | — | — | — |
| 1 | — | — | W31 | — | 0.5 | OEM-X60004-9 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | G4XFURYX-A-A32 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-X60001-4 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-X60001-5 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-X60001-6 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-X60005-5 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | G4XFURYX-A-A25 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | G4XFURYX-A-A34 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | G4XFURYX-B-B25 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | G4XFURYX-B-B34 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W50 | — | 0.5 | OEM-X60003-48 | — | — | — |
| 1 | — | — | W51 | — | 0.5 | G4XFURYX-A-A7 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X60001-1 | Injector/unloader relay control (terminal 15) | low_side_out | G4XFURYX-A-A21 | Aux 1 | low_side_out | corroborated | |
| OEM-X60001-4 | Power ground | ground | G4XFURYX-A-A25 + G4XFURYX-A-A34 + G4XFURYX-B-B25 + G4XFURYX-B-B34 | System Ground + System Ground + System Ground + System Ground | ground | corroborated | |
| OEM-X60001-5 | Power ground | ground | G4XFURYX-A-A25 + G4XFURYX-A-A34 + G4XFURYX-B-B25 + G4XFURYX-B-B34 | System Ground + System Ground + System Ground + System Ground | ground | corroborated | |
| OEM-X60001-6 | Power ground | ground | G4XFURYX-A-A25 + G4XFURYX-A-A34 + G4XFURYX-B-B25 + G4XFURYX-B-B34 | System Ground + System Ground + System Ground + System Ground | ground | corroborated | |
| OEM-X60001-7 | Battery constant (terminal 30) | power_in | — | — | — | corroborated | |
| OEM-X60001-8 | ECU main power (terminal 87 via main relay) | power_in | G4XFURYX-A-A5 + G4XFURYX-B-B5 | +14V ECU Power + Aux 9/10 E-Throttle Supply | power_in | corroborated | |
| OEM-X60001-9 | Voltage supply (injector / fuse carrier) | power_in | G4XFURYX-A-A5 + G4XFURYX-B-B5 | +14V ECU Power + Aux 9/10 E-Throttle Supply | power_in | corroborated | |
| OEM-X60002-1 | O2 sensor heater, bank 1 pre-cat | low_side_out | G4XFURYX-A-A18 | Aux 4 | low_side_out | corroborated | |
| OEM-X60002-13 | O2 sensor heater, bank 2 pre-cat | low_side_out | G4XFURYX-A-A29 | Aux 5 | switch_out | corroborated | |
| OEM-X60002-14 | O2 sensor signal, bank 1 pre-cat | lambda_nb_in | G4XFURYX-B-B15 | Analog Volt 6 | analog_in | corroborated | |
| OEM-X60002-15 | O2 sensor signal, bank 2 pre-cat | lambda_nb_in | G4XFURYX-B-B16 | Analog Volt 7 | analog_in | corroborated | |
| OEM-X60002-16 | O2 sensor signal, bank 1 post-cat | lambda_nb_in | G4XFURYX-B-B23 | Analog Volt 8 | analog_in | corroborated | |
| OEM-X60002-18 | O2 sensor signal, bank 2 post-cat | lambda_nb_in | G4XFURYX-B-B24 | Analog Volt 9 | analog_in | corroborated | |
| OEM-X60002-19 | O2 sensor heater, bank 2 post-cat | low_side_out | G4XFURYX-A-A28 | Aux 6 | switch_out | corroborated | |
| OEM-X60002-20 | O2 sensor ground, bank 1 pre-cat | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-21 | O2 sensor ground, bank 2 pre-cat | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-22 | O2 sensor ground, bank 1 post-cat | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-23 | Main relay control | low_side_out | G4XFURYX-A-A20 | Aux 2 | low_side_out | corroborated | |
| OEM-X60002-24 | O2 sensor ground, bank 2 post-cat | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-7 | O2 sensor heater, bank 1 post-cat | low_side_out | G4XFURYX-A-A27 | Aux 7 | switch_out | corroborated | |
| OEM-X60003-1 | Mass air flow (MAF) signal | analog_in | G4XFURYX-A-A17 | Analog Volt 1 | analog_in | corroborated | |
| OEM-X60003-10 | Throttle position sensor 2 | analog_in | G4XFURYX-A-A14 | Analog Volt 4 | analog_in | corroborated | |
| OEM-X60003-15 | Exhaust camshaft ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-17 | MAF ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-18 | Intake camshaft ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-19 | Throttle position sensor 1 | analog_in | G4XFURYX-A-A22 | Analog Volt 2 | analog_in | corroborated | |
| OEM-X60003-2 | Exhaust camshaft position | trigger_in | G4XFURYX-A-A9 | Trigger 2 | trigger_in | corroborated | |
| OEM-X60003-20 | Throttle ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-21 | Crankshaft ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-22 | Intake air temperature (IAT) | temp_in | G4XFURYX-A-A16 | Analog Temp 2 | temp_in | corroborated | |
| OEM-X60003-23 | IAT ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-24 | Engine coolant temperature (ECT) | temp_in | G4XFURYX-A-A15 | Analog Temp 1 | temp_in | corroborated | |
| OEM-X60003-25 | ECT ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-27 | Engine oil temperature | temp_in | G4XFURYX-B-B6 | Analog Temp 3 | temp_in | corroborated | |
| OEM-X60003-28 | Oil temperature ground | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-29 | Knock sensor, cylinders 1-3 (A) | knock_in | G4XFURYX-B-B9 | Knock 1 | knock_in | corroborated | |
| OEM-X60003-30 | Knock sensor, cylinders 1-3 (B) | knock_in | G4XFURYX-B-B8 | Knock 2 | knock_in | corroborated | |
| OEM-X60003-31 | Knock sensor, cylinders 4-6 (A) | knock_in | — | — | — | corroborated | |
| OEM-X60003-32 | Knock sensor, cylinders 4-6 (B) | knock_in | — | — | — | corroborated | |
| OEM-X60003-33 | Injector cylinder 1 | injector_out | G4XFURYX-A-A4 | Injector 1 | injector_out | corroborated | |
| OEM-X60003-34 | Injector cylinder 2 | injector_out | G4XFURYX-A-A3 | Injector 2 | injector_out | corroborated | |
| OEM-X60003-35 | Injector cylinder 3 | injector_out | G4XFURYX-A-A2 | Injector 3 | injector_out | corroborated | |
| OEM-X60003-36 | Injector cylinder 4 | injector_out | G4XFURYX-A-A1 | Injector 4 | injector_out | corroborated | |
| OEM-X60003-37 | Injector cylinder 5 | injector_out | G4XFURYX-B-B4 | Injector 5 | injector_out | corroborated | |
| OEM-X60003-38 | Injector cylinder 6 | injector_out | G4XFURYX-B-B3 | Injector 6 | injector_out | corroborated | |
| OEM-X60003-40 | VANOS intake solenoid | low_side_out | G4XFURYX-A-A26 | Aux 8 | switch_out | corroborated | |
| OEM-X60003-41 | VANOS exhaust solenoid | low_side_out | G4XFURYX-B-B2 | Injector 7 | injector_out | corroborated | |
| OEM-X60003-42 | Evap purge valve | low_side_out | G4XFURYX-B-B1 | Injector 8 | injector_out | corroborated | |
| OEM-X60003-43 | Throttle motor drive 1 (H-bridge) | hbridge_out | G4XFURYX-B-B18 | Aux 9 | hbridge_out | corroborated | |
| OEM-X60003-44 | Throttle motor drive 2 (H-bridge) | hbridge_out | G4XFURYX-B-B26 | Aux 10 | hbridge_out | corroborated | |
| OEM-X60003-45 | Map-controlled thermostat | low_side_out | — | — | — | corroborated | |
| OEM-X60003-46 | Idle speed control, close | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-47 | Idle speed control, open | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-48 | Knock sensor shield | shield | G4XFURYX-A-A7 | Shield Ground | shield | corroborated | |
| OEM-X60003-49 | DISA intake flap | low_side_out | — | — | — | corroborated | |
| OEM-X60003-5 | Intake camshaft position | trigger_in | G4XFURYX-A-A30 | Digital Input 1 | digital_in | corroborated | |
| OEM-X60003-7 | Throttle body +5V supply | vref | G4XFURYX-A-A32 | +5V Out | vref | corroborated | |
| OEM-X60003-8 | Crankshaft position | trigger_in | G4XFURYX-A-A8 | Trigger 1 | trigger_in | corroborated | |
| OEM-X60004-10 | Fuel pump relay control | low_side_out | G4XFURYX-A-A19 | Aux 3 | low_side_out | corroborated | |
| OEM-X60004-12 | Pedal ground 2 | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-13 | Pedal position signal 2 | analog_in | G4XFURYX-B-B33 | Analog Volt 5 | analog_in | corroborated | |
| OEM-X60004-14 | Pedal +5V supply 2 | vref | G4XFURYX-A-A32 | +5V Out | vref | corroborated | |
| OEM-X60004-7 | Pedal ground 1 | sensor_ground | G4XFURYX-A-A24 + G4XFURYX-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-8 | Pedal position signal 1 | analog_in | G4XFURYX-A-A33 | Analog Volt 3 | analog_in | corroborated | |
| OEM-X60004-9 | Pedal +5V supply 1 | vref | G4XFURYX-A-A32 | +5V Out | vref | corroborated | |
| OEM-X60005-1 | Ignition coil 3 | ignition_out | G4XFURYX-A-A11 | Ignition 3 | ignition_out | corroborated | |
| OEM-X60005-2 | Ignition coil 2 | ignition_out | G4XFURYX-A-A12 | Ignition 2 | ignition_out | corroborated | |
| OEM-X60005-3 | Ignition coil 1 | ignition_out | G4XFURYX-A-A13 | Ignition 1 | ignition_out | corroborated | |
| OEM-X60005-5 | Ignition ground | ground | G4XFURYX-A-A25 + G4XFURYX-A-A34 + G4XFURYX-B-B25 + G4XFURYX-B-B34 | System Ground + System Ground + System Ground + System Ground | ground | corroborated | |
| OEM-X60005-7 | Ignition coil 6 | ignition_out | G4XFURYX-B-B12 | Ignition 6 | ignition_out | corroborated | |
| OEM-X60005-8 | Ignition coil 5 | ignition_out | G4XFURYX-B-B13 | Ignition 5 | ignition_out | corroborated | |
| OEM-X60005-9 | Ignition coil 4 | ignition_out | G4XFURYX-A-A10 | Ignition 4 | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | no route | ECU main power (terminal 87 via main relay) | — | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | no route | Voltage supply (injector / fuse carrier) | — | |
| W3 | SP-14V-1 | G4XFURYX-A-A5 | 0.85 | no route | +14V ECU Power | — | |
| W4 | SP-14V-1 | G4XFURYX-B-B5 | 0.85 | no route | Aux 9/10 E-Throttle Supply | — | |
| W5 | OEM-X60001-4 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-X60001-5 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | OEM-X60001-6 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W8 | OEM-X60005-5 | SP-GND-1 | 0.85 | no route | Ignition ground | — | |
| W9 | SP-GND-1 | G4XFURYX-A-A25 | 0.85 | no route | System Ground | — | |
| W10 | SP-GND-1 | G4XFURYX-A-A34 | 0.85 | no route | System Ground | — | |
| W11 | SP-GND-1 | G4XFURYX-B-B25 | 0.85 | no route | System Ground | — | |
| W12 | SP-GND-1 | G4XFURYX-B-B34 | 0.85 | no route | System Ground | — | |
| W13 | OEM-X60002-20 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 pre-cat | — | |
| W14 | OEM-X60002-21 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 pre-cat | — | |
| W15 | OEM-X60002-22 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 post-cat | — | |
| W16 | OEM-X60002-24 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 post-cat | — | |
| W17 | OEM-X60003-15 | SP-0V-1 | 0.5 | no route | Exhaust camshaft ground | — | |
| W18 | OEM-X60003-17 | SP-0V-1 | 0.5 | no route | MAF ground | — | |
| W19 | OEM-X60003-18 | SP-0V-1 | 0.5 | no route | Intake camshaft ground | — | |
| W20 | OEM-X60003-20 | SP-0V-1 | 0.5 | no route | Throttle ground | — | |
| W21 | OEM-X60003-21 | SP-0V-1 | 0.5 | no route | Crankshaft ground | — | |
| W22 | OEM-X60003-23 | SP-0V-1 | 0.5 | no route | IAT ground | — | |
| W23 | OEM-X60003-25 | SP-0V-1 | 0.5 | no route | ECT ground | — | |
| W24 | OEM-X60003-28 | SP-0V-1 | 0.5 | no route | Oil temperature ground | — | |
| W25 | OEM-X60004-12 | SP-0V-1 | 0.5 | no route | Pedal ground 2 | — | |
| W26 | OEM-X60004-7 | SP-0V-1 | 0.5 | no route | Pedal ground 1 | — | |
| W27 | SP-0V-1 | G4XFURYX-A-A24 | 0.5 | no route | Sensor Ground | — | |
| W28 | SP-0V-1 | G4XFURYX-B-B22 | 0.5 | no route | Sensor Ground | — | |
| W29 | OEM-X60003-7 | SP-5V1-1 | 0.5 | no route | Throttle body +5V supply | — | |
| W30 | OEM-X60004-14 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 2 | — | |
| W31 | OEM-X60004-9 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 1 | — | |
| W32 | SP-5V1-1 | G4XFURYX-A-A32 | 0.5 | no route | +5V Out | — | |
| W33 | OEM-X60003-8 | G4XFURYX-A-A8 | 0.5 | no route | Crankshaft position | — | |
| W34 | OEM-X60003-2 | G4XFURYX-A-A9 | 0.5 | no route | Exhaust camshaft position | — | |
| W35 | OEM-X60003-5 | G4XFURYX-A-A30 | 0.5 | no route | Intake camshaft position | — | |
| W36 | OEM-X60003-29 | G4XFURYX-B-B9 | 0.5 | no route | Knock sensor, cylinders 1-3 (A) | — | |
| W37 | OEM-X60003-30 | G4XFURYX-B-B8 | 0.5 | no route | Knock sensor, cylinders 1-3 (B) | — | |
| W38 | OEM-X60005-3 | G4XFURYX-A-A13 | 0.5 | no route | Ignition coil 1 | — | |
| W39 | OEM-X60005-2 | G4XFURYX-A-A12 | 0.5 | no route | Ignition coil 2 | — | |
| W40 | OEM-X60005-1 | G4XFURYX-A-A11 | 0.5 | no route | Ignition coil 3 | — | |
| W41 | OEM-X60005-9 | G4XFURYX-A-A10 | 0.5 | no route | Ignition coil 4 | — | |
| W42 | OEM-X60005-8 | G4XFURYX-B-B13 | 0.5 | no route | Ignition coil 5 | — | |
| W43 | OEM-X60005-7 | G4XFURYX-B-B12 | 0.5 | no route | Ignition coil 6 | — | |
| W44 | OEM-X60003-33 | G4XFURYX-A-A4 | 0.5 | no route | Injector cylinder 1 | — | |
| W45 | OEM-X60003-34 | G4XFURYX-A-A3 | 0.5 | no route | Injector cylinder 2 | — | |
| W46 | OEM-X60003-35 | G4XFURYX-A-A2 | 0.5 | no route | Injector cylinder 3 | — | |
| W47 | OEM-X60003-36 | G4XFURYX-A-A1 | 0.5 | no route | Injector cylinder 4 | — | |
| W48 | OEM-X60003-37 | G4XFURYX-B-B4 | 0.5 | no route | Injector cylinder 5 | — | |
| W49 | OEM-X60003-38 | G4XFURYX-B-B3 | 0.5 | no route | Injector cylinder 6 | — | |
| W50 | OEM-X60003-48 | SP-SHD-1 | 0.5 | no route | Knock sensor shield | — | |
| W51 | SP-SHD-1 | G4XFURYX-A-A7 | 0.5 | no route | Shield Ground | — | |
| W52 | OEM-X60003-43 | G4XFURYX-B-B18 | 0.5 | no route | Throttle motor drive 1 (H-bridge) | — | |
| W53 | OEM-X60003-44 | G4XFURYX-B-B26 | 0.5 | no route | Throttle motor drive 2 (H-bridge) | — | |
| W54 | OEM-X60001-1 | G4XFURYX-A-A21 | 0.5 | no route | Injector/unloader relay control (terminal 15) | — | |
| W55 | OEM-X60002-23 | G4XFURYX-A-A20 | 0.5 | no route | Main relay control | — | |
| W56 | OEM-X60004-10 | G4XFURYX-A-A19 | 0.5 | no route | Fuel pump relay control | — | |
| W57 | OEM-X60002-1 | G4XFURYX-A-A18 | 0.5 | no route | O2 sensor heater, bank 1 pre-cat | — | |
| W58 | OEM-X60002-13 | G4XFURYX-A-A29 | 0.5 | no route | O2 sensor heater, bank 2 pre-cat | — | |
| W59 | OEM-X60002-19 | G4XFURYX-A-A28 | 0.5 | no route | O2 sensor heater, bank 2 post-cat | — | |
| W60 | OEM-X60002-7 | G4XFURYX-A-A27 | 0.5 | no route | O2 sensor heater, bank 1 post-cat | — | |
| W61 | OEM-X60003-40 | G4XFURYX-A-A26 | 0.5 | no route | VANOS intake solenoid | — | |
| W62 | OEM-X60003-41 | G4XFURYX-B-B2 | 0.5 | no route | VANOS exhaust solenoid | — | |
| W63 | OEM-X60003-42 | G4XFURYX-B-B1 | 0.5 | no route | Evap purge valve | — | |
| W64 | OEM-X60003-1 | G4XFURYX-A-A17 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W65 | OEM-X60003-19 | G4XFURYX-A-A22 | 0.5 | no route | Throttle position sensor 1 | — | |
| W66 | OEM-X60004-8 | G4XFURYX-A-A33 | 0.5 | no route | Pedal position signal 1 | — | |
| W67 | OEM-X60003-10 | G4XFURYX-A-A14 | 0.5 | no route | Throttle position sensor 2 | — | |
| W68 | OEM-X60004-13 | G4XFURYX-B-B33 | 0.5 | no route | Pedal position signal 2 | — | |
| W69 | OEM-X60002-14 | G4XFURYX-B-B15 | 0.5 | no route | O2 sensor signal, bank 1 pre-cat | — | |
| W70 | OEM-X60002-15 | G4XFURYX-B-B16 | 0.5 | no route | O2 sensor signal, bank 2 pre-cat | — | |
| W71 | OEM-X60002-16 | G4XFURYX-B-B23 | 0.5 | no route | O2 sensor signal, bank 1 post-cat | — | |
| W72 | OEM-X60002-18 | G4XFURYX-B-B24 | 0.5 | no route | O2 sensor signal, bank 2 post-cat | — | |
| W73 | OEM-X60003-24 | G4XFURYX-A-A15 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W74 | OEM-X60003-22 | G4XFURYX-A-A16 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W75 | OEM-X60003-27 | G4XFURYX-B-B6 | 0.5 | no route | Engine oil temperature | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | BMW-E46-MS43-CONN | BMW | E46 DME (MS43) harness connector | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (11)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | DBW_MOTOR_CURRENT | G4XFURYX-B-B18 | Cannot confirm G4X FuryX can drive the throttle motor: neither the motor current (OEM-X60003-43) nor the rating of G4XFURYX-B-B18 "Aux 9" is known. |
| warn | DBW_MOTOR_CURRENT | G4XFURYX-B-B26 | Cannot confirm G4X FuryX can drive the throttle motor: neither the motor current (OEM-X60003-44) nor the rating of G4XFURYX-B-B26 "Aux 10" is known. |
| warn | DBW_MOTOR_ISOLATION | G4XFURYX-B-B5 | G4XFURYX-B-B5 "Aux 9/10 E-Throttle Supply" is fed from the same net as the ECU main supply (G4XFURYX-A-A5). Link's S2000 DBW wiring feeds the throttle-motor supply through a separate isolation relay switched by the ECU, so motor power can be cut on a throttle fault. Add one, or confirm G4X FuryX cuts the H-bridge internally. |
| warn | NET_FAMILY | OEM-X60003-5 ↔ G4XFURYX-A-A30 | OEM-X60003-5 "Intake camshaft position" [trigger_in] is wired to G4XFURYX-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-X60002-13 ↔ G4XFURYX-A-A29 | OEM-X60002-13 "O2 sensor heater, bank 2 pre-cat" [low_side_out] is wired to G4XFURYX-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60002-19 ↔ G4XFURYX-A-A28 | OEM-X60002-19 "O2 sensor heater, bank 2 post-cat" [low_side_out] is wired to G4XFURYX-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60002-7 ↔ G4XFURYX-A-A27 | OEM-X60002-7 "O2 sensor heater, bank 1 post-cat" [low_side_out] is wired to G4XFURYX-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-40 ↔ G4XFURYX-A-A26 | OEM-X60003-40 "VANOS intake solenoid" [low_side_out] is wired to G4XFURYX-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-41 ↔ G4XFURYX-B-B2 | OEM-X60003-41 "VANOS exhaust solenoid" [low_side_out] is wired to G4XFURYX-B-B2 "Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60003-42 ↔ G4XFURYX-B-B1 | OEM-X60003-42 "Evap purge valve" [low_side_out] is wired to G4XFURYX-B-B1 "Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 6 optional OEM pins are not mapped: OEM-X60003-31 Knock sensor, cylinders 4-6 (A); OEM-X60003-32 Knock sensor, cylinders 4-6 (B); OEM-X60003-45 Map-controlled thermostat; OEM-X60003-46 Idle speed control, close; OEM-X60003-47 Idle speed control, open; OEM-X60003-49 DISA intake flap |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X60001-7 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Needs CAN (E46 K-bus/CAN); not documented for this ECU - This car has EWS 3.3 (rolling code) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Not wired: - OEM-X60001 7: Battery constant (terminal 30): Link G4X FuryX has no battery-constant input; not needed - OEM-X60003 31: Knock sensor, cylinders 4-6 (A): no free knock input on Link G4X FuryX - OEM-X60003 32: Knock sensor, cylinders 4-6 (B): no free knock input on Link G4X FuryX - OEM-X60003 46: Idle speed control, close: no free hbridge on Link G4X FuryX - OEM-X60003 47: Idle speed control, open: no free hbridge on Link G4X FuryX - OEM-X60003 45: Map-controlled thermostat: no free low_side/ls_hs/injector/hbridge on Link G4X FuryX - OEM-X60003 49: DISA intake flap: no free low_side/ls_hs/injector/hbridge on Link G4X FuryX
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link: G4X FuryX quickstart + dealers | https://linkecu.com/documentation/FuryXQuickstartGuide.pdf | archive | 2026-10-05 | 5143b847c871 |
| 3 | community_copy | YourSpec: Link G4X FuryX flying-lead harness wiring list | https://wpm.yourspec.com/projects/view/1494 | — | — | — |
| 2 | community_copy | ms4x.net: Siemens MS43 Pinout | https://www.ms4x.net/index.php?title=Siemens_MS43_Pinout | — | — | — |
| 2 | community_copy | rusefi wiki: 2002 BMW 325 / 2004 BMW 330Ci E46 DME pinout (M54/MS43) | https://github.com/rusefi/rusefi/wiki/2002-BMW-325-and-2004-BMW-330Ci-E46-DME-pinout | — | — | — |