BMW 3 Series E46 M3 2001–2006 (S54) → Emtron KV8 (auto)
BMW 3 Series E46 M3 2001–2006 (S54) — Emtron — KV8
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-08
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 74 wires · 13 connectors · 6 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X60001-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-X60003-4 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-X60003-5 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | SP-14V-1 | KV8-D-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | SP-14V-1 | KV8-D-2 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-14V-1 | KV8-D-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-X60001-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-X60001-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-X60001-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-X60001-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-X60005-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | KV8-B-34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | KV8-B-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | KV8-C-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-GND-1 | KV8-C-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X60003-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X60003-35 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X60003-36 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X60003-37 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X60003-45 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X60003-49 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X60004-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-X60004-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | KV8-C-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | KV8-C-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-X60004-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-X60004-9 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | SP-5V1-1 | KV8-D-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-X60003-3 | KV8-D-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | SP-0V-1 | KV8-D-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X60003-30 | KV8-D-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | SP-0V-1 | KV8-D-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X60003-33 | KV8-D-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X60003-34 | KV8-D-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X60005-6 | KV8-B-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X60005-7 | KV8-B-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X60005-4 | KV8-B-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X60005-8 | KV8-B-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X60005-1 | KV8-B-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X60005-9 | KV8-B-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X60003-13 | KV8-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X60003-6 | KV8-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X60003-26 | KV8-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X60003-7 | KV8-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X60003-11 | KV8-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X60003-8 | KV8-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X60003-42 | KV8-B-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X60003-43 | KV8-B-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X60003-22 | KV8-B-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-X60003-23 | KV8-B-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X60001-1 | KV8-D-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-X60002-23 | KV8-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X60004-10 | KV8-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X60002-1 | KV8-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X60002-12 | KV8-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X60002-2 | KV8-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X60002-6 | KV8-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X60003-10 | KV8-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X60003-12 | KV8-B-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X60003-21 | KV8-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-X60003-9 | KV8-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-X60003-1 | KV8-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-X60003-32 | KV8-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-X60004-8 | KV8-C-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-X60003-31 | KV8-C-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-X60004-13 | KV8-C-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-X60002-14 | KV8-C-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-X60002-16 | KV8-C-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-X60003-28 | KV8-C-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-X60003-27 | KV8-C-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-X60003-44 | KV8-C-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-X60003-16 | KV8-C-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-X60003-50 | KV8-C-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | KV8-D-1 | KV8-B-34 | open (OL) | +12 V supply must not touch power ground | |
| 2 | KV8-D-1 | KV8-C-17 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | KV8-B-34 | KV8-D-21 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | KV8-C-17 | KV8-D-21 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 5 | KV8-D-1 | KV8-D-21 | open (OL) | +12 V supply must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
KV8-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | — | — | — | — | — | — | — |
| 2 | — | — | — | — | — | — | — | — | — |
| 3 | — | — | — | — | — | — | — | — | — |
| 4 | — | — | — | — | — | — | — | — | — |
| 5 | — | — | — | — | — | — | — | — | — |
| 6 | — | — | — | — | — | — | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | — | — | — | — | — | — | — | — | — |
| 9 | — | — | — | — | — | — | — | — | — |
| 10 | Lambda 1 heater − | — | W55 | — | 0.5 | OEM-X60002-1 | — | — | — |
| 11 | Lambda 2 heater − | — | W56 | — | 0.5 | OEM-X60002-12 | — | — | — |
| 12 | — | — | — | — | — | — | — | — | — |
| 13 | — | — | — | — | — | — | — | — | — |
| 14 | — | — | — | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — | — | — | — |
| 16 | Lambda 1 heater + | — | — | — | — | — | — | — | — |
| 17 | Lambda 2 heater + | — | — | — | — | — | — | — | — |
| 18 | Lambda 1 Nernst cell (Vs) | — | — | — | — | — | — | — | — |
| 19 | — | — | — | — | — | — | — | — | — |
| 20 | Lambda 2 cal resistor | — | — | — | — | — | — | — | — |
| 21 | Lambda 2 Nernst cell (Vs) | — | — | — | — | — | — | — | — |
| 22 | Lambda 2 pump cell (Ip) | — | — | — | — | — | — | — | — |
| 23 | Lambda 2 virtual ground | — | — | — | — | — | — | — | — |
| 24 | Lambda 1 cal resistor | — | — | — | — | — | — | — | — |
| 25 | Lambda 1 pump cell (Ip) | — | — | — | — | — | — | — | — |
| 26 | Lambda 1 virtual ground | — | — | — | — | — | — | — | — |
KV8-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injection 1 | — | W42 | — | 0.5 | OEM-X60003-13 | — | — | — |
| 2 | Injection 2 | — | W43 | — | 0.5 | OEM-X60003-6 | — | — | — |
| 3 | Injection 3 | — | W44 | — | 0.5 | OEM-X60003-26 | — | — | — |
| 4 | Injection 4 | — | W45 | — | 0.5 | OEM-X60003-7 | — | — | — |
| 5 | Injection 5 | — | W46 | — | 0.5 | OEM-X60003-11 | — | — | — |
| 6 | Injection 6 | — | W47 | — | 0.5 | OEM-X60003-8 | — | — | — |
| 7 | Injection 7 | — | — | — | — | — | — | — | — |
| 8 | Injection 8 | — | — | — | — | — | — | — | — |
| 9 | ECU ground | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | Aux 1 | — | W59 | — | 0.5 | OEM-X60003-10 | — | — | — |
| 11 | Aux 2 | — | W60 | — | 0.5 | OEM-X60003-12 | — | — | — |
| 12 | Aux 3 | — | W61 | — | 0.5 | OEM-X60003-21 | — | — | — |
| 13 | Aux 4 | — | W62 | — | 0.5 | OEM-X60003-9 | — | — | — |
| 14 | Aux 5 | — | W53 | — | 0.5 | OEM-X60002-23 | — | — | — |
| 15 | Aux 6 | — | W54 | — | 0.5 | OEM-X60004-10 | — | — | — |
| 16 | Aux 7 | — | W57 | — | 0.5 | OEM-X60002-2 | — | — | — |
| 17 | Aux 8 | — | W58 | — | 0.5 | OEM-X60002-6 | — | — | — |
| 18 | Aux 9 | — | W48 | — | 0.5 | OEM-X60003-42 | — | — | — |
| 19 | Aux 10 | — | W49 | — | 0.5 | OEM-X60003-43 | — | — | — |
| 20 | Aux 11 | — | W50 | — | 0.5 | OEM-X60003-22 | — | — | — |
| 21 | Aux 12 | — | W51 | — | 0.5 | OEM-X60003-23 | — | — | — |
| 22 | Aux 13 | — | — | — | — | — | — | — | — |
| 23 | Aux 14 | — | — | — | — | — | — | — | — |
| 24 | Aux 15 | — | — | — | — | — | — | — | — |
| 25 | Aux 16 | — | — | — | — | — | — | — | — |
| 26 | Ignition 1 | — | W36 | — | 0.5 | OEM-X60005-6 | — | — | — |
| 27 | Ignition 2 | — | W37 | — | 0.5 | OEM-X60005-7 | — | — | — |
| 28 | Ignition 3 | — | W38 | — | 0.5 | OEM-X60005-4 | — | — | — |
| 29 | Ignition 4 | — | W39 | — | 0.5 | OEM-X60005-8 | — | — | — |
| 30 | Ignition 5 | — | W40 | — | 0.5 | OEM-X60005-1 | — | — | — |
| 31 | Ignition 6 | — | W41 | — | 0.5 | OEM-X60005-9 | — | — | — |
| 32 | Ignition 7 | — | — | — | — | — | — | — | — |
| 33 | Ignition 8 | — | — | — | — | — | — | — | — |
| 34 | ECU ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
KV8-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU ground | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Analog in 1 | — | W63 | — | 0.5 | OEM-X60003-1 | — | — | — |
| 3 | Analog in 2 | — | W64 | — | 0.5 | OEM-X60003-32 | — | — | — |
| 4 | Analog in 3 | — | W65 | — | 0.5 | OEM-X60004-8 | — | — | — |
| 5 | Analog in 4 | — | W66 | — | 0.5 | OEM-X60003-31 | — | — | — |
| 6 | Analog in 5 | — | W67 | — | 0.5 | OEM-X60004-13 | — | — | — |
| 7 | Analog in 6 | — | W68 | — | 0.5 | OEM-X60002-14 | — | — | — |
| 8 | Analog in 7 | — | W69 | — | 0.5 | OEM-X60002-16 | — | — | — |
| 9 | Analog in 8 | — | W70 | — | 0.5 | OEM-X60003-28 | — | — | — |
| 10 | Analog in 9 | — | W71 | — | 0.5 | OEM-X60003-27 | — | — | — |
| 11 | Analog in 10 | — | W72 | — | 0.5 | OEM-X60003-44 | — | — | — |
| 12 | Analog in 11 | — | — | — | — | — | — | — | — |
| 13 | Analog in 12 | — | — | — | — | — | — | — | — |
| 14 | Analog in 13 | — | — | — | — | — | — | — | — |
| 15 | Analog in 14 | — | — | — | — | — | — | — | — |
| 16 | Analog in 15 | — | — | — | — | — | — | — | — |
| 17 | Analog sensor 0V reference | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Digital in 9 | — | — | — | — | — | — | — | — |
| 19 | Digital in 10 | — | — | — | — | — | — | — | — |
| 20 | Digital in 11 | — | — | — | — | — | — | — | — |
| 21 | Digital in 12 | — | — | — | — | — | — | — | — |
| 22 | Digital in 13 | — | — | — | — | — | — | — | — |
| 23 | Digital in 14 | — | — | — | — | — | — | — | — |
| 24 | Analog in 16 | — | — | — | — | — | — | — | — |
| 25 | Analog sensor 0V reference | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 26 | ECU ground | — | W16 | — | 0.85 | SP-GND-1 | — | — | — |
| 27 | Digital in 1 | — | W73 | — | 0.5 | OEM-X60003-16 | — | — | — |
| 28 | Digital in 2 | — | W74 | — | 0.5 | OEM-X60003-50 | — | — | — |
| 29 | Digital in 3 | — | — | — | — | — | — | — | — |
| 30 | Digital in 4 | — | — | — | — | — | — | — | — |
| 31 | Digital in 5 | — | — | — | — | — | — | — | — |
| 32 | Digital in 6 | — | — | — | — | — | — | — | — |
| 33 | Digital in 7 | — | — | — | — | — | — | — | — |
| 34 | Digital in 8 | — | — | — | — | — | — | — | — |
KV8-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU 14V supply | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | Aux 13–16 14V supply | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Sensor supply 8V | — | — | — | — | — | — | — | — |
| 4 | Crank index sensor + | — | W30 | — | 0.5 | OEM-X60003-3 | — | — | — |
| 5 | Crank index sensor − | — | W31 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sync sensor + | — | W32 | — | 0.5 | OEM-X60003-30 | — | — | — |
| 7 | Sync sensor − | — | W33 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | CAN 1 H | — | — | — | — | — | — | — | — |
| 9 | EFI relay output (low side, 200 mA) | — | W52 | — | 0.5 | OEM-X60001-1 | — | — | — |
| 10 | CAN 2 H | — | — | — | — | — | — | — | — |
| 11 | Knock 1 + | — | W34 | — | 0.5 | OEM-X60003-33 | — | — | — |
| 12 | Knock 1 − | — | — | — | — | — | — | — | — |
| 13 | Shield (crank/cam/knock) | — | — | — | — | — | — | — | — |
| 14 | CAN 1 L | — | — | — | — | — | — | — | — |
| 15 | Ignition switch input | — | — | — | — | — | — | — | — |
| 16 | CAN 2 L | — | — | — | — | — | — | — | — |
| 17 | Knock 2 + | — | W35 | — | 0.5 | OEM-X60003-34 | — | — | — |
| 18 | Knock 2 − | — | — | — | — | — | — | — | — |
| 19 | Analog output 0–5V | — | — | — | — | — | — | — | — |
| 20 | Aux 9–12 14V supply | — | W7 | — | 0.85 | SP-14V-1 | — | — | — |
| 21 | Sensor supply Vref1 5.0V | — | W29 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Sensor supply Vref2 5.0V | — | — | — | — | — | — | — | — |
| 23 | Ethernet Tx+ | — | — | — | — | — | — | — | — |
| 24 | Ethernet Tx− | — | — | — | — | — | — | — | — |
| 25 | Ethernet Rx+ | — | — | — | — | — | — | — | — |
| 26 | Ethernet Rx− | — | — | — | — | — | — | — | — |
OEM-X60001
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector relay control | — | W52 | — | 0.5 | KV8-D-9 | — | — | — |
| 2 | DBW output-stage supply (P_DKSM+) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Battery constant (terminal 30) | — | — | — | — | — | — | — | — |
| 8 | ECU main power (terminal 87 via main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | DBW output-stage return (P_DKSM-) | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-X60002
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | O2 sensor heater, front 1 (pre-cat) | — | W55 | — | 0.5 | KV8-A-10 | — | — | — |
| 12 | O2 sensor heater, rear 2 (post-cat) | — | W56 | — | 0.5 | KV8-A-11 | — | — | — |
| 14 | O2 sensor signal, rear 2 (post-cat) | — | W68 | — | 0.5 | KV8-C-7 | — | — | — |
| 16 | O2 sensor signal, rear 1 (post-cat) | — | W69 | — | 0.5 | KV8-C-8 | — | — | — |
| 2 | O2 sensor heater, front 2 (pre-cat) | — | W57 | — | 0.5 | KV8-B-16 | — | — | — |
| 23 | Main relay control | — | W53 | — | 0.5 | KV8-B-14 | — | — | — |
| 6 | O2 sensor heater, rear 1 (post-cat) | — | W58 | — | 0.5 | KV8-B-17 | — | — | — |
OEM-X60003
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Mass air flow (MAF) signal | — | W63 | — | 0.5 | KV8-C-2 | — | — | — |
| 10 | VANOS intake solenoid | — | W59 | — | 0.5 | KV8-B-10 | — | — | — |
| 11 | Injector cylinder 5 | — | W46 | — | 0.5 | KV8-B-5 | — | — | — |
| 12 | Map-controlled thermostat | — | W60 | — | 0.5 | KV8-B-11 | — | — | — |
| 13 | Injector cylinder 1 | — | W42 | — | 0.5 | KV8-B-1 | — | — | — |
| 15 | Throttle ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Oil pressure switch | — | W73 | — | 0.5 | KV8-C-27 | — | — | — |
| 21 | Evap purge valve | — | W61 | — | 0.5 | KV8-B-12 | — | — | — |
| 22 | Idle speed control, close | — | W50 | — | 0.5 | KV8-B-20 | — | — | — |
| 23 | Idle speed control, open | — | W51 | — | 0.5 | KV8-B-21 | — | — | — |
| 26 | Injector cylinder 3 | — | W44 | — | 0.5 | KV8-B-3 | — | — | — |
| 27 | Intake air temperature (IAT) | — | W71 | — | 0.5 | KV8-C-10 | — | — | — |
| 28 | Engine coolant temperature (ECT) | — | W70 | — | 0.5 | KV8-C-9 | — | — | — |
| 29 | Intake camshaft position | — | — | — | — | — | — | — | — |
| 3 | Crankshaft position | — | W30 | — | 0.5 | KV8-D-4 | — | — | — |
| 30 | Exhaust camshaft position | — | W32 | — | 0.5 | KV8-D-6 | — | — | — |
| 31 | Throttle position sensor 2 | — | W66 | — | 0.5 | KV8-C-5 | — | — | — |
| 32 | Throttle position sensor 1 | — | W64 | — | 0.5 | KV8-C-3 | — | — | — |
| 33 | Knock sensor 1 | — | W34 | — | 0.5 | KV8-D-11 | — | — | — |
| 34 | Knock sensor 2 | — | W35 | — | 0.5 | KV8-D-17 | — | — | — |
| 35 | ECT ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 36 | Intake camshaft ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 37 | Crankshaft ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | MAF supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 42 | Throttle motor drive 1 (H-bridge) | — | W48 | — | 0.5 | KV8-B-18 | — | — | — |
| 43 | Throttle motor drive 2 (H-bridge) | — | W49 | — | 0.5 | KV8-B-19 | — | — | — |
| 44 | Engine oil temperature | — | W72 | — | 0.5 | KV8-C-11 | — | — | — |
| 45 | Oil temperature ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 46 | Knock sensor 3 | — | — | — | — | — | — | — | — |
| 47 | Knock sensor 4 | — | — | — | — | — | — | — | — |
| 49 | Exhaust camshaft ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Throttle (EDK/ITB) supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 50 | Oil level switch | — | W74 | — | 0.5 | KV8-C-28 | — | — | — |
| 6 | Injector cylinder 2 | — | W43 | — | 0.5 | KV8-B-2 | — | — | — |
| 7 | Injector cylinder 4 | — | W45 | — | 0.5 | KV8-B-4 | — | — | — |
| 8 | Injector cylinder 6 | — | W47 | — | 0.5 | KV8-B-6 | — | — | — |
| 9 | VANOS exhaust solenoid | — | W62 | — | 0.5 | KV8-B-13 | — | — | — |
OEM-X60004
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Fuel pump relay control | — | W54 | — | 0.5 | KV8-B-15 | — | — | — |
| 12 | Pedal ground 2 | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | Pedal position signal 2 | — | W67 | — | 0.5 | KV8-C-6 | — | — | — |
| 14 | Pedal +5V supply 2 | — | W27 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | Pedal ground 1 | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Pedal position signal 1 | — | W65 | — | 0.5 | KV8-C-4 | — | — | — |
| 9 | Pedal +5V supply 1 | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
OEM-X60005
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil 5 | — | W40 | — | 0.5 | KV8-B-30 | — | — | — |
| 4 | Ignition coil 3 | — | W38 | — | 0.5 | KV8-B-28 | — | — | — |
| 5 | Ignition ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Ignition coil 1 | — | W36 | — | 0.5 | KV8-B-26 | — | — | — |
| 7 | Ignition coil 2 | — | W37 | — | 0.5 | KV8-B-27 | — | — | — |
| 8 | Ignition coil 4 | — | W39 | — | 0.5 | KV8-B-29 | — | — | — |
| 9 | Ignition coil 6 | — | W41 | — | 0.5 | KV8-B-31 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W17 | — | 0.5 | OEM-X60003-15 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X60003-35 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X60003-36 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X60003-37 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X60003-45 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-X60003-49 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-X60004-12 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-X60004-7 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | KV8-C-17 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | KV8-C-25 | — | — | — |
| 1 | — | — | W31 | — | 0.5 | KV8-D-5 | — | — | — |
| 1 | — | — | W33 | — | 0.5 | KV8-D-7 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X60001-2 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X60001-8 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-X60003-4 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-X60003-5 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | KV8-D-1 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | KV8-D-2 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | KV8-D-20 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W27 | — | 0.5 | OEM-X60004-14 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | OEM-X60004-9 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | KV8-D-21 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W8 | — | 0.85 | OEM-X60001-4 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-X60001-5 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-X60001-6 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-X60001-9 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | OEM-X60005-5 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | KV8-B-34 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | KV8-B-9 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | KV8-C-1 | — | — | — |
| 1 | — | — | W16 | — | 0.85 | KV8-C-26 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X60001-1 | Injector relay control | low_side_out | KV8-D-9 | EFI relay output (low side, 200 mA) | low_side_out | corroborated | |
| OEM-X60001-2 | DBW output-stage supply (P_DKSM+) | power_in | KV8-D-1 + KV8-D-2 + KV8-D-20 | ECU 14V supply + Aux 13–16 14V supply + Aux 9–12 14V supply | power_in | single_source | |
| OEM-X60001-4 | Power ground | ground | KV8-B-34 + KV8-B-9 + KV8-C-1 + KV8-C-26 | ECU ground + ECU ground + ECU ground + ECU ground | ground | corroborated | |
| OEM-X60001-5 | Power ground | ground | KV8-B-34 + KV8-B-9 + KV8-C-1 + KV8-C-26 | ECU ground + ECU ground + ECU ground + ECU ground | ground | corroborated | |
| OEM-X60001-6 | Power ground | ground | KV8-B-34 + KV8-B-9 + KV8-C-1 + KV8-C-26 | ECU ground + ECU ground + ECU ground + ECU ground | ground | corroborated | |
| OEM-X60001-7 | Battery constant (terminal 30) | power_in | — | — | — | corroborated | |
| OEM-X60001-8 | ECU main power (terminal 87 via main relay) | power_in | KV8-D-1 + KV8-D-2 + KV8-D-20 | ECU 14V supply + Aux 13–16 14V supply + Aux 9–12 14V supply | power_in | corroborated | |
| OEM-X60001-9 | DBW output-stage return (P_DKSM-) | ground | KV8-B-34 + KV8-B-9 + KV8-C-1 + KV8-C-26 | ECU ground + ECU ground + ECU ground + ECU ground | ground | single_source | |
| OEM-X60002-1 | O2 sensor heater, front 1 (pre-cat) | low_side_out | KV8-A-10 | Lambda 1 heater − | low_side_out | corroborated | |
| OEM-X60002-12 | O2 sensor heater, rear 2 (post-cat) | low_side_out | KV8-A-11 | Lambda 2 heater − | low_side_out | corroborated | |
| OEM-X60002-14 | O2 sensor signal, rear 2 (post-cat) | lambda_nb_in | KV8-C-7 | Analog in 6 | analog_in | corroborated | |
| OEM-X60002-16 | O2 sensor signal, rear 1 (post-cat) | lambda_nb_in | KV8-C-8 | Analog in 7 | analog_in | corroborated | |
| OEM-X60002-2 | O2 sensor heater, front 2 (pre-cat) | low_side_out | KV8-B-16 | Aux 7 | low_side_out | corroborated | |
| OEM-X60002-23 | Main relay control | low_side_out | KV8-B-14 | Aux 5 | low_side_out | corroborated | |
| OEM-X60002-6 | O2 sensor heater, rear 1 (post-cat) | low_side_out | KV8-B-17 | Aux 8 | low_side_out | corroborated | |
| OEM-X60003-1 | Mass air flow (MAF) signal | analog_in | KV8-C-2 | Analog in 1 | analog_in | corroborated | |
| OEM-X60003-10 | VANOS intake solenoid | low_side_out | KV8-B-10 | Aux 1 | low_side_out | corroborated | |
| OEM-X60003-11 | Injector cylinder 5 | injector_out | KV8-B-5 | Injection 5 | injector_out | corroborated | |
| OEM-X60003-12 | Map-controlled thermostat | low_side_out | KV8-B-11 | Aux 2 | low_side_out | corroborated | |
| OEM-X60003-13 | Injector cylinder 1 | injector_out | KV8-B-1 | Injection 1 | injector_out | corroborated | |
| OEM-X60003-15 | Throttle ground | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-16 | Oil pressure switch | digital_in | KV8-C-27 | Digital in 1 | digital_in | corroborated | |
| OEM-X60003-21 | Evap purge valve | low_side_out | KV8-B-12 | Aux 3 | low_side_out | corroborated | |
| OEM-X60003-22 | Idle speed control, close | hbridge_out | KV8-B-20 | Aux 11 | hbridge_out | corroborated | |
| OEM-X60003-23 | Idle speed control, open | hbridge_out | KV8-B-21 | Aux 12 | hbridge_out | corroborated | |
| OEM-X60003-26 | Injector cylinder 3 | injector_out | KV8-B-3 | Injection 3 | injector_out | corroborated | |
| OEM-X60003-27 | Intake air temperature (IAT) | temp_in | KV8-C-10 | Analog in 9 | analog_in | corroborated | |
| OEM-X60003-28 | Engine coolant temperature (ECT) | temp_in | KV8-C-9 | Analog in 8 | analog_in | corroborated | |
| OEM-X60003-29 | Intake camshaft position | trigger_in | — | — | — | corroborated | |
| OEM-X60003-3 | Crankshaft position | trigger_in | KV8-D-4 | Crank index sensor + | trigger_in | corroborated | |
| OEM-X60003-30 | Exhaust camshaft position | trigger_in | KV8-D-6 | Sync sensor + | trigger_in | corroborated | |
| OEM-X60003-31 | Throttle position sensor 2 | analog_in | KV8-C-5 | Analog in 4 | analog_in | corroborated | |
| OEM-X60003-32 | Throttle position sensor 1 | analog_in | KV8-C-3 | Analog in 2 | analog_in | corroborated | |
| OEM-X60003-33 | Knock sensor 1 | knock_in | KV8-D-11 | Knock 1 + | knock_in | corroborated | |
| OEM-X60003-34 | Knock sensor 2 | knock_in | KV8-D-17 | Knock 2 + | knock_in | corroborated | |
| OEM-X60003-35 | ECT ground | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-36 | Intake camshaft ground | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-37 | Crankshaft ground | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-4 | MAF supply | power_in | KV8-D-1 + KV8-D-2 + KV8-D-20 | ECU 14V supply + Aux 13–16 14V supply + Aux 9–12 14V supply | power_in | corroborated | |
| OEM-X60003-42 | Throttle motor drive 1 (H-bridge) | hbridge_out | KV8-B-18 | Aux 9 | hbridge_out | corroborated | |
| OEM-X60003-43 | Throttle motor drive 2 (H-bridge) | hbridge_out | KV8-B-19 | Aux 10 | hbridge_out | corroborated | |
| OEM-X60003-44 | Engine oil temperature | temp_in | KV8-C-11 | Analog in 10 | analog_in | corroborated | |
| OEM-X60003-45 | Oil temperature ground | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-46 | Knock sensor 3 | knock_in | — | — | — | corroborated | |
| OEM-X60003-47 | Knock sensor 4 | knock_in | — | — | — | corroborated | |
| OEM-X60003-49 | Exhaust camshaft ground | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-5 | Throttle (EDK/ITB) supply | power_in | KV8-D-1 + KV8-D-2 + KV8-D-20 | ECU 14V supply + Aux 13–16 14V supply + Aux 9–12 14V supply | power_in | corroborated | |
| OEM-X60003-50 | Oil level switch | digital_in | KV8-C-28 | Digital in 2 | digital_in | corroborated | |
| OEM-X60003-6 | Injector cylinder 2 | injector_out | KV8-B-2 | Injection 2 | injector_out | corroborated | |
| OEM-X60003-7 | Injector cylinder 4 | injector_out | KV8-B-4 | Injection 4 | injector_out | corroborated | |
| OEM-X60003-8 | Injector cylinder 6 | injector_out | KV8-B-6 | Injection 6 | injector_out | corroborated | |
| OEM-X60003-9 | VANOS exhaust solenoid | low_side_out | KV8-B-13 | Aux 4 | low_side_out | corroborated | |
| OEM-X60004-10 | Fuel pump relay control | low_side_out | KV8-B-15 | Aux 6 | low_side_out | corroborated | |
| OEM-X60004-12 | Pedal ground 2 | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60004-13 | Pedal position signal 2 | analog_in | KV8-C-6 | Analog in 5 | analog_in | corroborated | |
| OEM-X60004-14 | Pedal +5V supply 2 | vref | KV8-D-21 | Sensor supply Vref1 5.0V | vref | corroborated | |
| OEM-X60004-7 | Pedal ground 1 | sensor_ground | KV8-C-17 + KV8-C-25 + KV8-D-5 + KV8-D-7 | Analog sensor 0V reference + Analog sensor 0V reference + Crank index sensor − + Sync sensor − | sensor_ground + trigger_in | corroborated | |
| OEM-X60004-8 | Pedal position signal 1 | analog_in | KV8-C-4 | Analog in 3 | analog_in | corroborated | |
| OEM-X60004-9 | Pedal +5V supply 1 | vref | KV8-D-21 | Sensor supply Vref1 5.0V | vref | corroborated | |
| OEM-X60005-1 | Ignition coil 5 | ignition_out | KV8-B-30 | Ignition 5 | ignition_out | corroborated | |
| OEM-X60005-4 | Ignition coil 3 | ignition_out | KV8-B-28 | Ignition 3 | ignition_out | corroborated | |
| OEM-X60005-5 | Ignition ground | ground | KV8-B-34 + KV8-B-9 + KV8-C-1 + KV8-C-26 | ECU ground + ECU ground + ECU ground + ECU ground | ground | corroborated | |
| OEM-X60005-6 | Ignition coil 1 | ignition_out | KV8-B-26 | Ignition 1 | ignition_out | corroborated | |
| OEM-X60005-7 | Ignition coil 2 | ignition_out | KV8-B-27 | Ignition 2 | ignition_out | corroborated | |
| OEM-X60005-8 | Ignition coil 4 | ignition_out | KV8-B-29 | Ignition 4 | ignition_out | corroborated | |
| OEM-X60005-9 | Ignition coil 6 | ignition_out | KV8-B-31 | Ignition 6 | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-2 | SP-14V-1 | 0.85 | no route | DBW output-stage supply (P_DKSM+) | — | |
| W2 | OEM-X60001-8 | SP-14V-1 | 0.85 | no route | ECU main power (terminal 87 via main relay) | — | |
| W3 | OEM-X60003-4 | SP-14V-1 | 0.85 | no route | MAF supply | — | |
| W4 | OEM-X60003-5 | SP-14V-1 | 0.85 | no route | Throttle (EDK/ITB) supply | — | |
| W5 | SP-14V-1 | KV8-D-1 | 0.85 | no route | ECU 14V supply | — | |
| W6 | SP-14V-1 | KV8-D-2 | 0.85 | no route | Aux 13–16 14V supply | — | |
| W7 | SP-14V-1 | KV8-D-20 | 0.85 | no route | Aux 9–12 14V supply | — | |
| W8 | OEM-X60001-4 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W9 | OEM-X60001-5 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W10 | OEM-X60001-6 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W11 | OEM-X60001-9 | SP-GND-1 | 0.85 | no route | DBW output-stage return (P_DKSM-) | — | |
| W12 | OEM-X60005-5 | SP-GND-1 | 0.85 | no route | Ignition ground | — | |
| W13 | SP-GND-1 | KV8-B-34 | 0.85 | no route | ECU ground | — | |
| W14 | SP-GND-1 | KV8-B-9 | 0.85 | no route | ECU ground | — | |
| W15 | SP-GND-1 | KV8-C-1 | 0.85 | no route | ECU ground | — | |
| W16 | SP-GND-1 | KV8-C-26 | 0.85 | no route | ECU ground | — | |
| W17 | OEM-X60003-15 | SP-0V-1 | 0.5 | no route | Throttle ground | — | |
| W18 | OEM-X60003-35 | SP-0V-1 | 0.5 | no route | ECT ground | — | |
| W19 | OEM-X60003-36 | SP-0V-1 | 0.5 | no route | Intake camshaft ground | — | |
| W20 | OEM-X60003-37 | SP-0V-1 | 0.5 | no route | Crankshaft ground | — | |
| W21 | OEM-X60003-45 | SP-0V-1 | 0.5 | no route | Oil temperature ground | — | |
| W22 | OEM-X60003-49 | SP-0V-1 | 0.5 | no route | Exhaust camshaft ground | — | |
| W23 | OEM-X60004-12 | SP-0V-1 | 0.5 | no route | Pedal ground 2 | — | |
| W24 | OEM-X60004-7 | SP-0V-1 | 0.5 | no route | Pedal ground 1 | — | |
| W25 | SP-0V-1 | KV8-C-17 | 0.5 | no route | Analog sensor 0V reference | — | |
| W26 | SP-0V-1 | KV8-C-25 | 0.5 | no route | Analog sensor 0V reference | — | |
| W27 | OEM-X60004-14 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 2 | — | |
| W28 | OEM-X60004-9 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 1 | — | |
| W29 | SP-5V1-1 | KV8-D-21 | 0.5 | no route | Sensor supply Vref1 5.0V | — | |
| W30 | OEM-X60003-3 | KV8-D-4 | 0.5 | no route | Crankshaft position | — | |
| W31 | SP-0V-1 | KV8-D-5 | 0.5 | no route | Crank index sensor − | — | |
| W32 | OEM-X60003-30 | KV8-D-6 | 0.5 | no route | Exhaust camshaft position | — | |
| W33 | SP-0V-1 | KV8-D-7 | 0.5 | no route | Sync sensor − | — | |
| W34 | OEM-X60003-33 | KV8-D-11 | 0.5 | no route | Knock sensor 1 | — | |
| W35 | OEM-X60003-34 | KV8-D-17 | 0.5 | no route | Knock sensor 2 | — | |
| W36 | OEM-X60005-6 | KV8-B-26 | 0.5 | no route | Ignition coil 1 | — | |
| W37 | OEM-X60005-7 | KV8-B-27 | 0.5 | no route | Ignition coil 2 | — | |
| W38 | OEM-X60005-4 | KV8-B-28 | 0.5 | no route | Ignition coil 3 | — | |
| W39 | OEM-X60005-8 | KV8-B-29 | 0.5 | no route | Ignition coil 4 | — | |
| W40 | OEM-X60005-1 | KV8-B-30 | 0.5 | no route | Ignition coil 5 | — | |
| W41 | OEM-X60005-9 | KV8-B-31 | 0.5 | no route | Ignition coil 6 | — | |
| W42 | OEM-X60003-13 | KV8-B-1 | 0.5 | no route | Injector cylinder 1 | — | |
| W43 | OEM-X60003-6 | KV8-B-2 | 0.5 | no route | Injector cylinder 2 | — | |
| W44 | OEM-X60003-26 | KV8-B-3 | 0.5 | no route | Injector cylinder 3 | — | |
| W45 | OEM-X60003-7 | KV8-B-4 | 0.5 | no route | Injector cylinder 4 | — | |
| W46 | OEM-X60003-11 | KV8-B-5 | 0.5 | no route | Injector cylinder 5 | — | |
| W47 | OEM-X60003-8 | KV8-B-6 | 0.5 | no route | Injector cylinder 6 | — | |
| W48 | OEM-X60003-42 | KV8-B-18 | 0.5 | no route | Throttle motor drive 1 (H-bridge) | — | |
| W49 | OEM-X60003-43 | KV8-B-19 | 0.5 | no route | Throttle motor drive 2 (H-bridge) | — | |
| W50 | OEM-X60003-22 | KV8-B-20 | 0.5 | no route | Idle speed control, close | — | |
| W51 | OEM-X60003-23 | KV8-B-21 | 0.5 | no route | Idle speed control, open | — | |
| W52 | OEM-X60001-1 | KV8-D-9 | 0.5 | no route | Injector relay control | — | |
| W53 | OEM-X60002-23 | KV8-B-14 | 0.5 | no route | Main relay control | — | |
| W54 | OEM-X60004-10 | KV8-B-15 | 0.5 | no route | Fuel pump relay control | — | |
| W55 | OEM-X60002-1 | KV8-A-10 | 0.5 | no route | O2 sensor heater, front 1 (pre-cat) | — | |
| W56 | OEM-X60002-12 | KV8-A-11 | 0.5 | no route | O2 sensor heater, rear 2 (post-cat) | — | |
| W57 | OEM-X60002-2 | KV8-B-16 | 0.5 | no route | O2 sensor heater, front 2 (pre-cat) | — | |
| W58 | OEM-X60002-6 | KV8-B-17 | 0.5 | no route | O2 sensor heater, rear 1 (post-cat) | — | |
| W59 | OEM-X60003-10 | KV8-B-10 | 0.5 | no route | VANOS intake solenoid | — | |
| W60 | OEM-X60003-12 | KV8-B-11 | 0.5 | no route | Map-controlled thermostat | — | |
| W61 | OEM-X60003-21 | KV8-B-12 | 0.5 | no route | Evap purge valve | — | |
| W62 | OEM-X60003-9 | KV8-B-13 | 0.5 | no route | VANOS exhaust solenoid | — | |
| W63 | OEM-X60003-1 | KV8-C-2 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W64 | OEM-X60003-32 | KV8-C-3 | 0.5 | no route | Throttle position sensor 1 | — | |
| W65 | OEM-X60004-8 | KV8-C-4 | 0.5 | no route | Pedal position signal 1 | — | |
| W66 | OEM-X60003-31 | KV8-C-5 | 0.5 | no route | Throttle position sensor 2 | — | |
| W67 | OEM-X60004-13 | KV8-C-6 | 0.5 | no route | Pedal position signal 2 | — | |
| W68 | OEM-X60002-14 | KV8-C-7 | 0.5 | no route | O2 sensor signal, rear 2 (post-cat) | — | |
| W69 | OEM-X60002-16 | KV8-C-8 | 0.5 | no route | O2 sensor signal, rear 1 (post-cat) | — | |
| W70 | OEM-X60003-28 | KV8-C-9 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W71 | OEM-X60003-27 | KV8-C-10 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W72 | OEM-X60003-44 | KV8-C-11 | 0.5 | no route | Engine oil temperature | — | |
| W73 | OEM-X60003-16 | KV8-C-27 | 0.5 | no route | Oil pressure switch | — | |
| W74 | OEM-X60003-50 | KV8-C-28 | 0.5 | no route | Oil level switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 3-1437290-8 | TE | Superseal 1.0 26-way plug, Key 2 | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| connector | BMW-E46-MSS54-CONN | BMW | E46 DME (MSS54) harness connector | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 55.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (10)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-X60003-29 | Required OEM function "Intake camshaft position" (trigger_in) is not connected to the new ECU. |
| warn | DATASET_GAP | KV8 A | 14 of 26 cavities on KV8 A have no pin data (1,2,3,4,5,6,7,8,9,12,13,14,15,19). Anything there is invisible to these checks. |
| warn | DBW_MOTOR_CURRENT | KV8-B-18 | Cannot confirm KV8 can drive the throttle motor: KV8-B-18 "Aux 9" is rated 5 A, but the motor current at OEM-X60003-42 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | KV8-B-19 | Cannot confirm KV8 can drive the throttle motor: KV8-B-19 "Aux 10" is rated 5 A, but the motor current at OEM-X60003-43 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_ISOLATION | KV8-D-20 | KV8-D-20 "Aux 9–12 14V supply" is fed from the same net as the ECU main supply (KV8-D-1). Link's S2000 DBW wiring feeds the throttle-motor supply through a separate isolation relay switched by the ECU, so motor power can be cut on a throttle fault. Add one, or confirm KV8 cuts the H-bridge internally. |
| info | NET_FAMILY | OEM-X60003-15 ↔ KV8-D-5 | OEM-X60003-15 "Throttle ground" [sensor_ground] is wired to KV8-D-5 "Crank index sensor −" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-X60003-27 ↔ KV8-C-10 | OEM-X60003-27 "Intake air temperature (IAT)" [temp_in] is wired to KV8-C-10 "Analog in 9" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-X60003-28 ↔ KV8-C-9 | OEM-X60003-28 "Engine coolant temperature (ECT)" [temp_in] is wired to KV8-C-9 "Analog in 8" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-X60003-44 ↔ KV8-C-11 | OEM-X60003-44 "Engine oil temperature" [temp_in] is wired to KV8-C-11 "Analog in 10" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 2 optional OEM pins are not mapped: OEM-X60003-46 Knock sensor 3; OEM-X60003-47 Knock sensor 4 |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X60001-7 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Needs CAN (E46 K-bus/CAN); not documented for this ECU - Trigger pattern for BMW S54 not found in the ECU's docs (no BMW S-series trigger pattern named) - This car has EWS 3.3 (rolling code) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Open items: - OEM-X60003 29: Intake camshaft position: no free cam_hall/cam_vr/frequency_in input on Emtron KV8 Not wired: - OEM-X60001 7: Battery constant (terminal 30): Emtron KV8 has no battery-constant input; not needed - KV8-D 12: Knock 1 − left open: the stock knock sensor has one ECU wire; check the ECU manual for single-wire knock sensors - KV8-D 18: Knock 2 − left open: the stock knock sensor has one ECU wire; check the ECU manual for single-wire knock sensors - OEM-X60003 46: Knock sensor 3: no free knock input on Emtron KV8 - OEM-X60003 47: Knock sensor 4: no free knock input on Emtron KV8 - KV8-D 15: Ignition switch input: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | oem_wiring_diagram | BMW WDS A6000 DME pin table, E83 X3 (M54B30/MS45) | https://wds.psjr.org/sv/e83/zinfo/E83_PA6000A.htm | — | — | — |
| 2 | user_dataset | Subaru ECU Matcher dataset (hiubin), vehicleId=1 | — | — | — | — |
| 2 | community_copy | bimmer-service: DME MSS54 (S54) pinout | https://www.bimmer-service.com/2025/11/14/dme-mss54-s54-pinout-schematic-diagram/ | — | — | — |
| 2 | community_copy | rusefi wiki: 2002 and 2004 BMW M3 E46 DME pinout (S54/MSS54) | https://github.com/rusefi/rusefi/wiki/2002-and-2004-BMW-M3-E46-DME-pinout | — | — | — |