BMW 3 Series E46 M3 2001–2006 (S54) → Haltech Elite 2500 HT-151300 (auto)
BMW 3 Series E46 M3 2001–2006 (S54) — Haltech — Elite 2500
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-08
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 71 wires · 11 connectors · 1 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X60001-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-X60003-4 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-X60003-5 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | SP-14V-1 | ELITE2500-A-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | SP-14V-1 | ELITE2500-B-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-X60001-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-X60001-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-X60001-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-X60001-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-X60005-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | ELITE2500-A-10 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | ELITE2500-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-X60003-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-X60003-35 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X60003-36 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X60003-37 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X60003-45 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X60003-49 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X60004-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X60004-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | ELITE2500-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | ELITE2500-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | ELITE2500-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-X60004-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-X60004-9 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-5V1-1 | ELITE2500-A-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-X60003-3 | ELITE2500-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | SP-0V-1 | ELITE2500-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-X60003-30 | ELITE2500-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | SP-0V-1 | ELITE2500-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X60003-29 | ELITE2500-B-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X60003-33 | ELITE2500-B-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X60003-34 | ELITE2500-B-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X60005-6 | ELITE2500-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X60005-7 | ELITE2500-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X60005-4 | ELITE2500-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X60005-8 | ELITE2500-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X60005-1 | ELITE2500-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X60005-9 | ELITE2500-A-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X60003-13 | ELITE2500-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X60003-6 | ELITE2500-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X60003-26 | ELITE2500-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X60003-7 | ELITE2500-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X60003-11 | ELITE2500-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X60003-8 | ELITE2500-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X60003-42 | ELITE2500-B-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X60003-43 | ELITE2500-B-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X60001-1 | ELITE2500-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X60002-23 | ELITE2500-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-X60004-10 | ELITE2500-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X60002-1 | ELITE2500-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-X60002-12 | ELITE2500-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X60002-2 | ELITE2500-B-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X60002-6 | ELITE2500-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X60003-10 | ELITE2500-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X60003-12 | ELITE2500-A-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X60003-21 | ELITE2500-A-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X60003-9 | ELITE2500-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X60003-1 | ELITE2500-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X60003-32 | ELITE2500-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-X60004-8 | ELITE2500-A-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-X60003-31 | ELITE2500-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-X60004-13 | ELITE2500-B-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-X60002-14 | ELITE2500-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-X60002-16 | ELITE2500-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-X60003-28 | ELITE2500-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-X60003-27 | ELITE2500-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-X60003-44 | ELITE2500-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-X60003-16 | ELITE2500-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-X60003-50 | ELITE2500-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | ELITE2500-A-26 | ELITE2500-A-10 | open (OL) | +12 V supply must not touch power ground | |
| 2 | ELITE2500-A-26 | ELITE2500-B-14 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | ELITE2500-A-10 | ELITE2500-A-9 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | ELITE2500-A-26 | ELITE2500-A-9 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 5 | ELITE2500-B-14 | ELITE2500-A-9 | open (OL) | sensor ground must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
ELITE2500-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | DPO 2 | — | W52 | — | 0.5 | OEM-X60002-1 | — | — | — |
| 10 | Battery ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | Battery ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | +8V DC | — | — | — | — | — | — | — | — |
| 13 | 12V ignition input | — | — | — | — | — | — | — | — |
| 14 | AVI 10 (TPS) | — | W69 | — | 0.5 | OEM-X60003-44 | — | — | — |
| 15 | AVI 9 (MAP) | — | W68 | — | 0.5 | OEM-X60003-27 | — | — | — |
| 16 | AVI 2 | — | W61 | — | 0.5 | OEM-X60003-32 | — | — | — |
| 17 | AVI 3 | — | W62 | — | 0.5 | OEM-X60004-8 | — | — | — |
| 18 | DPO 1 | — | W50 | — | 0.5 | OEM-X60002-23 | — | — | — |
| 19 | INJ 1 | — | W41 | — | 0.5 | OEM-X60003-13 | — | — | — |
| 2 | AVI 4 | — | W63 | — | 0.5 | OEM-X60003-31 | — | — | — |
| 20 | INJ 2 | — | W42 | — | 0.5 | OEM-X60003-6 | — | — | — |
| 21 | INJ 3 | — | W43 | — | 0.5 | OEM-X60003-26 | — | — | — |
| 22 | INJ 4 | — | W44 | — | 0.5 | OEM-X60003-7 | — | — | — |
| 23 | DPO 3 | — | W53 | — | 0.5 | OEM-X60002-12 | — | — | — |
| 24 | DPO 5 (fuel pump trigger) | — | W51 | — | 0.5 | OEM-X60004-10 | — | — | — |
| 25 | DPO 6 (ECR OUT) | — | W49 | — | 0.5 | OEM-X60001-1 | — | — | — |
| 26 | ECU injector power input | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | INJ 5 | — | W45 | — | 0.5 | OEM-X60003-11 | — | — | — |
| 28 | INJ 6 | — | W46 | — | 0.5 | OEM-X60003-8 | — | — | — |
| 29 | INJ 7 | — | W59 | — | 0.5 | OEM-X60003-9 | — | — | — |
| 3 | IGN 1 | — | W35 | — | 0.5 | OEM-X60005-6 | — | — | — |
| 30 | INJ 8 | — | — | — | — | — | — | — | — |
| 31 | Stepper 1 P1 / DPO | — | W55 | — | 0.5 | OEM-X60002-6 | — | — | — |
| 32 | Stepper 1 P2 / DPO | — | W56 | — | 0.5 | OEM-X60003-10 | — | — | — |
| 33 | Stepper 1 P3 / DPO | — | W57 | — | 0.5 | OEM-X60003-12 | — | — | — |
| 34 | Stepper 1 P4 / DPO | — | W58 | — | 0.5 | OEM-X60003-21 | — | — | — |
| 4 | IGN 2 | — | W36 | — | 0.5 | OEM-X60005-7 | — | — | — |
| 5 | IGN 3 | — | W37 | — | 0.5 | OEM-X60005-4 | — | — | — |
| 6 | IGN 4 | — | W38 | — | 0.5 | OEM-X60005-8 | — | — | — |
| 7 | IGN 5 | — | W39 | — | 0.5 | OEM-X60005-1 | — | — | — |
| 8 | IGN 6 | — | W40 | — | 0.5 | OEM-X60005-9 | — | — | — |
| 9 | +5V DC | — | W27 | — | 0.5 | SP-5V1-1 | — | — | — |
ELITE2500-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Crank (Trigger) (+) | — | W28 | — | 0.5 | OEM-X60003-3 | — | — | — |
| 10 | SPI 3 | — | W71 | — | 0.5 | OEM-X60003-50 | — | — | — |
| 11 | +13.8V ECU supply | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
| 12 | AVI 6 (O2 Input 1) | — | W65 | — | 0.5 | OEM-X60002-14 | — | — | — |
| 13 | AVI 1 (O2 Input 2) | — | W60 | — | 0.5 | OEM-X60003-1 | — | — | — |
| 14 | Signal ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Signal ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Signal ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | IGN 7 | — | — | — | — | — | — | — | — |
| 18 | IGN 8 | — | — | — | — | — | — | — | — |
| 19 | DPO 4 | — | W54 | — | 0.5 | OEM-X60002-2 | — | — | — |
| 2 | Cam (Home) (+) | — | W30 | — | 0.5 | OEM-X60003-30 | — | — | — |
| 20 | AVI 5 | — | W64 | — | 0.5 | OEM-X60004-13 | — | — | — |
| 21 | KNOCK 1 | — | W33 | — | 0.5 | OEM-X60003-33 | — | — | — |
| 22 | KNOCK 2 | — | W34 | — | 0.5 | OEM-X60003-34 | — | — | — |
| 23 | CAN H | — | — | — | — | — | — | — | — |
| 24 | CAN L | — | — | — | — | — | — | — | — |
| 25 | DBW 1 / DPO | — | W47 | — | 0.5 | OEM-X60003-42 | — | — | — |
| 26 | DBW 2 / DPO | — | W48 | — | 0.5 | OEM-X60003-43 | — | — | — |
| 3 | AVI 7 (Air Temp) | — | W66 | — | 0.5 | OEM-X60002-16 | — | — | — |
| 4 | AVI 8 (Coolant Temp) | — | W67 | — | 0.5 | OEM-X60003-28 | — | — | — |
| 5 | Crank (Trigger) (−) | — | W29 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Cam (Home) (−) | — | W31 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | SPI 4 | — | — | — | — | — | — | — | — |
| 8 | SPI 1 | — | W32 | — | 0.5 | OEM-X60003-29 | — | — | — |
| 9 | SPI 2 | — | W70 | — | 0.5 | OEM-X60003-16 | — | — | — |
OEM-X60001
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector relay control | — | W49 | — | 0.5 | ELITE2500-A-25 | — | — | — |
| 2 | DBW output-stage supply (P_DKSM+) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Battery constant (terminal 30) | — | — | — | — | — | — | — | — |
| 8 | ECU main power (terminal 87 via main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | DBW output-stage return (P_DKSM-) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-X60002
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | O2 sensor heater, front 1 (pre-cat) | — | W52 | — | 0.5 | ELITE2500-A-1 | — | — | — |
| 12 | O2 sensor heater, rear 2 (post-cat) | — | W53 | — | 0.5 | ELITE2500-A-23 | — | — | — |
| 14 | O2 sensor signal, rear 2 (post-cat) | — | W65 | — | 0.5 | ELITE2500-B-12 | — | — | — |
| 16 | O2 sensor signal, rear 1 (post-cat) | — | W66 | — | 0.5 | ELITE2500-B-3 | — | — | — |
| 2 | O2 sensor heater, front 2 (pre-cat) | — | W54 | — | 0.5 | ELITE2500-B-19 | — | — | — |
| 23 | Main relay control | — | W50 | — | 0.5 | ELITE2500-A-18 | — | — | — |
| 6 | O2 sensor heater, rear 1 (post-cat) | — | W55 | — | 0.5 | ELITE2500-A-31 | — | — | — |
OEM-X60003
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Mass air flow (MAF) signal | — | W60 | — | 0.5 | ELITE2500-B-13 | — | — | — |
| 10 | VANOS intake solenoid | — | W56 | — | 0.5 | ELITE2500-A-32 | — | — | — |
| 11 | Injector cylinder 5 | — | W45 | — | 0.5 | ELITE2500-A-27 | — | — | — |
| 12 | Map-controlled thermostat | — | W57 | — | 0.5 | ELITE2500-A-33 | — | — | — |
| 13 | Injector cylinder 1 | — | W41 | — | 0.5 | ELITE2500-A-19 | — | — | — |
| 15 | Throttle ground | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Oil pressure switch | — | W70 | — | 0.5 | ELITE2500-B-9 | — | — | — |
| 21 | Evap purge valve | — | W58 | — | 0.5 | ELITE2500-A-34 | — | — | — |
| 22 | Idle speed control, close | — | — | — | — | — | — | — | — |
| 23 | Idle speed control, open | — | — | — | — | — | — | — | — |
| 26 | Injector cylinder 3 | — | W43 | — | 0.5 | ELITE2500-A-21 | — | — | — |
| 27 | Intake air temperature (IAT) | — | W68 | — | 0.5 | ELITE2500-A-15 | — | — | — |
| 28 | Engine coolant temperature (ECT) | — | W67 | — | 0.5 | ELITE2500-B-4 | — | — | — |
| 29 | Intake camshaft position | — | W32 | — | 0.5 | ELITE2500-B-8 | — | — | — |
| 3 | Crankshaft position | — | W28 | — | 0.5 | ELITE2500-B-1 | — | — | — |
| 30 | Exhaust camshaft position | — | W30 | — | 0.5 | ELITE2500-B-2 | — | — | — |
| 31 | Throttle position sensor 2 | — | W63 | — | 0.5 | ELITE2500-A-2 | — | — | — |
| 32 | Throttle position sensor 1 | — | W61 | — | 0.5 | ELITE2500-A-16 | — | — | — |
| 33 | Knock sensor 1 | — | W33 | — | 0.5 | ELITE2500-B-21 | — | — | — |
| 34 | Knock sensor 2 | — | W34 | — | 0.5 | ELITE2500-B-22 | — | — | — |
| 35 | ECT ground | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 36 | Intake camshaft ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 37 | Crankshaft ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | MAF supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 42 | Throttle motor drive 1 (H-bridge) | — | W47 | — | 0.5 | ELITE2500-B-25 | — | — | — |
| 43 | Throttle motor drive 2 (H-bridge) | — | W48 | — | 0.5 | ELITE2500-B-26 | — | — | — |
| 44 | Engine oil temperature | — | W69 | — | 0.5 | ELITE2500-A-14 | — | — | — |
| 45 | Oil temperature ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 46 | Knock sensor 3 | — | — | — | — | — | — | — | — |
| 47 | Knock sensor 4 | — | — | — | — | — | — | — | — |
| 49 | Exhaust camshaft ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Throttle (EDK/ITB) supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 50 | Oil level switch | — | W71 | — | 0.5 | ELITE2500-B-10 | — | — | — |
| 6 | Injector cylinder 2 | — | W42 | — | 0.5 | ELITE2500-A-20 | — | — | — |
| 7 | Injector cylinder 4 | — | W44 | — | 0.5 | ELITE2500-A-22 | — | — | — |
| 8 | Injector cylinder 6 | — | W46 | — | 0.5 | ELITE2500-A-28 | — | — | — |
| 9 | VANOS exhaust solenoid | — | W59 | — | 0.5 | ELITE2500-A-29 | — | — | — |
OEM-X60004
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Fuel pump relay control | — | W51 | — | 0.5 | ELITE2500-A-24 | — | — | — |
| 12 | Pedal ground 2 | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | Pedal position signal 2 | — | W64 | — | 0.5 | ELITE2500-B-20 | — | — | — |
| 14 | Pedal +5V supply 2 | — | W25 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | Pedal ground 1 | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Pedal position signal 1 | — | W62 | — | 0.5 | ELITE2500-A-17 | — | — | — |
| 9 | Pedal +5V supply 1 | — | W26 | — | 0.5 | SP-5V1-1 | — | — | — |
OEM-X60005
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil 5 | — | W39 | — | 0.5 | ELITE2500-A-7 | — | — | — |
| 4 | Ignition coil 3 | — | W37 | — | 0.5 | ELITE2500-A-5 | — | — | — |
| 5 | Ignition ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Ignition coil 1 | — | W35 | — | 0.5 | ELITE2500-A-3 | — | — | — |
| 7 | Ignition coil 2 | — | W36 | — | 0.5 | ELITE2500-A-4 | — | — | — |
| 8 | Ignition coil 4 | — | W38 | — | 0.5 | ELITE2500-A-6 | — | — | — |
| 9 | Ignition coil 6 | — | W40 | — | 0.5 | ELITE2500-A-8 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-X60003-15 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-X60003-35 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-X60003-36 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-X60003-37 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X60003-45 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X60003-49 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X60004-12 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X60004-7 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | ELITE2500-B-14 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | ELITE2500-B-15 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | ELITE2500-B-16 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | ELITE2500-B-5 | — | — | — |
| 1 | — | — | W31 | — | 0.5 | ELITE2500-B-6 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X60001-2 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X60001-8 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-X60003-4 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-X60003-5 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | ELITE2500-A-26 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | ELITE2500-B-11 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W25 | — | 0.5 | OEM-X60004-14 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | OEM-X60004-9 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | ELITE2500-A-9 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W7 | — | 0.85 | OEM-X60001-4 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-X60001-5 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-X60001-6 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-X60001-9 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-X60005-5 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | ELITE2500-A-10 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | ELITE2500-A-11 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X60001-1 | Injector relay control | low_side_out | ELITE2500-A-25 | DPO 6 (ECR OUT) | low_side_out | corroborated | |
| OEM-X60001-2 | DBW output-stage supply (P_DKSM+) | power_in | ELITE2500-A-26 + ELITE2500-B-11 | ECU injector power input + +13.8V ECU supply | power_in | single_source | |
| OEM-X60001-4 | Power ground | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-X60001-5 | Power ground | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-X60001-6 | Power ground | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-X60001-7 | Battery constant (terminal 30) | power_in | — | — | — | corroborated | |
| OEM-X60001-8 | ECU main power (terminal 87 via main relay) | power_in | ELITE2500-A-26 + ELITE2500-B-11 | ECU injector power input + +13.8V ECU supply | power_in | corroborated | |
| OEM-X60001-9 | DBW output-stage return (P_DKSM-) | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | single_source | |
| OEM-X60002-1 | O2 sensor heater, front 1 (pre-cat) | low_side_out | ELITE2500-A-1 | DPO 2 | low_side_out | corroborated | |
| OEM-X60002-12 | O2 sensor heater, rear 2 (post-cat) | low_side_out | ELITE2500-A-23 | DPO 3 | low_side_out | corroborated | |
| OEM-X60002-14 | O2 sensor signal, rear 2 (post-cat) | lambda_nb_in | ELITE2500-B-12 | AVI 6 (O2 Input 1) | analog_in | corroborated | |
| OEM-X60002-16 | O2 sensor signal, rear 1 (post-cat) | lambda_nb_in | ELITE2500-B-3 | AVI 7 (Air Temp) | analog_in | corroborated | |
| OEM-X60002-2 | O2 sensor heater, front 2 (pre-cat) | low_side_out | ELITE2500-B-19 | DPO 4 | low_side_out | corroborated | |
| OEM-X60002-23 | Main relay control | low_side_out | ELITE2500-A-18 | DPO 1 | low_side_out | corroborated | |
| OEM-X60002-6 | O2 sensor heater, rear 1 (post-cat) | low_side_out | ELITE2500-A-31 | Stepper 1 P1 / DPO | switch_out | corroborated | |
| OEM-X60003-1 | Mass air flow (MAF) signal | analog_in | ELITE2500-B-13 | AVI 1 (O2 Input 2) | analog_in | corroborated | |
| OEM-X60003-10 | VANOS intake solenoid | low_side_out | ELITE2500-A-32 | Stepper 1 P2 / DPO | switch_out | corroborated | |
| OEM-X60003-11 | Injector cylinder 5 | injector_out | ELITE2500-A-27 | INJ 5 | injector_out | corroborated | |
| OEM-X60003-12 | Map-controlled thermostat | low_side_out | ELITE2500-A-33 | Stepper 1 P3 / DPO | switch_out | corroborated | |
| OEM-X60003-13 | Injector cylinder 1 | injector_out | ELITE2500-A-19 | INJ 1 | injector_out | corroborated | |
| OEM-X60003-15 | Throttle ground | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-16 | Oil pressure switch | digital_in | ELITE2500-B-9 | SPI 2 | digital_in | corroborated | |
| OEM-X60003-21 | Evap purge valve | low_side_out | ELITE2500-A-34 | Stepper 1 P4 / DPO | switch_out | corroborated | |
| OEM-X60003-22 | Idle speed control, close | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-23 | Idle speed control, open | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-26 | Injector cylinder 3 | injector_out | ELITE2500-A-21 | INJ 3 | injector_out | corroborated | |
| OEM-X60003-27 | Intake air temperature (IAT) | temp_in | ELITE2500-A-15 | AVI 9 (MAP) | analog_in | corroborated | |
| OEM-X60003-28 | Engine coolant temperature (ECT) | temp_in | ELITE2500-B-4 | AVI 8 (Coolant Temp) | analog_in | corroborated | |
| OEM-X60003-29 | Intake camshaft position | trigger_in | ELITE2500-B-8 | SPI 1 | digital_in | corroborated | |
| OEM-X60003-3 | Crankshaft position | trigger_in | ELITE2500-B-1 | Crank (Trigger) (+) | trigger_in | corroborated | |
| OEM-X60003-30 | Exhaust camshaft position | trigger_in | ELITE2500-B-2 | Cam (Home) (+) | trigger_in | corroborated | |
| OEM-X60003-31 | Throttle position sensor 2 | analog_in | ELITE2500-A-2 | AVI 4 | analog_in | corroborated | |
| OEM-X60003-32 | Throttle position sensor 1 | analog_in | ELITE2500-A-16 | AVI 2 | analog_in | corroborated | |
| OEM-X60003-33 | Knock sensor 1 | knock_in | ELITE2500-B-21 | KNOCK 1 | knock_in | corroborated | |
| OEM-X60003-34 | Knock sensor 2 | knock_in | ELITE2500-B-22 | KNOCK 2 | knock_in | corroborated | |
| OEM-X60003-35 | ECT ground | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-36 | Intake camshaft ground | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-37 | Crankshaft ground | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-4 | MAF supply | power_in | ELITE2500-A-26 + ELITE2500-B-11 | ECU injector power input + +13.8V ECU supply | power_in | corroborated | |
| OEM-X60003-42 | Throttle motor drive 1 (H-bridge) | hbridge_out | ELITE2500-B-25 | DBW 1 / DPO | hbridge_out | corroborated | |
| OEM-X60003-43 | Throttle motor drive 2 (H-bridge) | hbridge_out | ELITE2500-B-26 | DBW 2 / DPO | hbridge_out | corroborated | |
| OEM-X60003-44 | Engine oil temperature | temp_in | ELITE2500-A-14 | AVI 10 (TPS) | analog_in | corroborated | |
| OEM-X60003-45 | Oil temperature ground | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-46 | Knock sensor 3 | knock_in | — | — | — | corroborated | |
| OEM-X60003-47 | Knock sensor 4 | knock_in | — | — | — | corroborated | |
| OEM-X60003-49 | Exhaust camshaft ground | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60003-5 | Throttle (EDK/ITB) supply | power_in | ELITE2500-A-26 + ELITE2500-B-11 | ECU injector power input + +13.8V ECU supply | power_in | corroborated | |
| OEM-X60003-50 | Oil level switch | digital_in | ELITE2500-B-10 | SPI 3 | digital_in | corroborated | |
| OEM-X60003-6 | Injector cylinder 2 | injector_out | ELITE2500-A-20 | INJ 2 | injector_out | corroborated | |
| OEM-X60003-7 | Injector cylinder 4 | injector_out | ELITE2500-A-22 | INJ 4 | injector_out | corroborated | |
| OEM-X60003-8 | Injector cylinder 6 | injector_out | ELITE2500-A-28 | INJ 6 | injector_out | corroborated | |
| OEM-X60003-9 | VANOS exhaust solenoid | low_side_out | ELITE2500-A-29 | INJ 7 | injector_out | corroborated | |
| OEM-X60004-10 | Fuel pump relay control | low_side_out | ELITE2500-A-24 | DPO 5 (fuel pump trigger) | low_side_out | corroborated | |
| OEM-X60004-12 | Pedal ground 2 | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60004-13 | Pedal position signal 2 | analog_in | ELITE2500-B-20 | AVI 5 | analog_in | corroborated | |
| OEM-X60004-14 | Pedal +5V supply 2 | vref | ELITE2500-A-9 | +5V DC | vref | corroborated | |
| OEM-X60004-7 | Pedal ground 1 | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | corroborated | |
| OEM-X60004-8 | Pedal position signal 1 | analog_in | ELITE2500-A-17 | AVI 3 | analog_in | corroborated | |
| OEM-X60004-9 | Pedal +5V supply 1 | vref | ELITE2500-A-9 | +5V DC | vref | corroborated | |
| OEM-X60005-1 | Ignition coil 5 | ignition_out | ELITE2500-A-7 | IGN 5 | ignition_out | corroborated | |
| OEM-X60005-4 | Ignition coil 3 | ignition_out | ELITE2500-A-5 | IGN 3 | ignition_out | corroborated | |
| OEM-X60005-5 | Ignition ground | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | corroborated | |
| OEM-X60005-6 | Ignition coil 1 | ignition_out | ELITE2500-A-3 | IGN 1 | ignition_out | corroborated | |
| OEM-X60005-7 | Ignition coil 2 | ignition_out | ELITE2500-A-4 | IGN 2 | ignition_out | corroborated | |
| OEM-X60005-8 | Ignition coil 4 | ignition_out | ELITE2500-A-6 | IGN 4 | ignition_out | corroborated | |
| OEM-X60005-9 | Ignition coil 6 | ignition_out | ELITE2500-A-8 | IGN 6 | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-2 | SP-14V-1 | 0.85 | no route | DBW output-stage supply (P_DKSM+) | — | |
| W2 | OEM-X60001-8 | SP-14V-1 | 0.85 | no route | ECU main power (terminal 87 via main relay) | — | |
| W3 | OEM-X60003-4 | SP-14V-1 | 0.85 | no route | MAF supply | — | |
| W4 | OEM-X60003-5 | SP-14V-1 | 0.85 | no route | Throttle (EDK/ITB) supply | — | |
| W5 | SP-14V-1 | ELITE2500-A-26 | 0.85 | no route | ECU injector power input | — | |
| W6 | SP-14V-1 | ELITE2500-B-11 | 0.85 | no route | +13.8V ECU supply | — | |
| W7 | OEM-X60001-4 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W8 | OEM-X60001-5 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W9 | OEM-X60001-6 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W10 | OEM-X60001-9 | SP-GND-1 | 0.85 | no route | DBW output-stage return (P_DKSM-) | — | |
| W11 | OEM-X60005-5 | SP-GND-1 | 0.85 | no route | Ignition ground | — | |
| W12 | SP-GND-1 | ELITE2500-A-10 | 0.85 | no route | Battery ground | — | |
| W13 | SP-GND-1 | ELITE2500-A-11 | 0.85 | no route | Battery ground | — | |
| W14 | OEM-X60003-15 | SP-0V-1 | 0.5 | no route | Throttle ground | — | |
| W15 | OEM-X60003-35 | SP-0V-1 | 0.5 | no route | ECT ground | — | |
| W16 | OEM-X60003-36 | SP-0V-1 | 0.5 | no route | Intake camshaft ground | — | |
| W17 | OEM-X60003-37 | SP-0V-1 | 0.5 | no route | Crankshaft ground | — | |
| W18 | OEM-X60003-45 | SP-0V-1 | 0.5 | no route | Oil temperature ground | — | |
| W19 | OEM-X60003-49 | SP-0V-1 | 0.5 | no route | Exhaust camshaft ground | — | |
| W20 | OEM-X60004-12 | SP-0V-1 | 0.5 | no route | Pedal ground 2 | — | |
| W21 | OEM-X60004-7 | SP-0V-1 | 0.5 | no route | Pedal ground 1 | — | |
| W22 | SP-0V-1 | ELITE2500-B-14 | 0.5 | no route | Signal ground | — | |
| W23 | SP-0V-1 | ELITE2500-B-15 | 0.5 | no route | Signal ground | — | |
| W24 | SP-0V-1 | ELITE2500-B-16 | 0.5 | no route | Signal ground | — | |
| W25 | OEM-X60004-14 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 2 | — | |
| W26 | OEM-X60004-9 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 1 | — | |
| W27 | SP-5V1-1 | ELITE2500-A-9 | 0.5 | no route | +5V DC | — | |
| W28 | OEM-X60003-3 | ELITE2500-B-1 | 0.5 | no route | Crankshaft position | — | |
| W29 | SP-0V-1 | ELITE2500-B-5 | 0.5 | no route | Crank (Trigger) (−) | — | |
| W30 | OEM-X60003-30 | ELITE2500-B-2 | 0.5 | no route | Exhaust camshaft position | — | |
| W31 | SP-0V-1 | ELITE2500-B-6 | 0.5 | no route | Cam (Home) (−) | — | |
| W32 | OEM-X60003-29 | ELITE2500-B-8 | 0.5 | no route | Intake camshaft position | — | |
| W33 | OEM-X60003-33 | ELITE2500-B-21 | 0.5 | no route | Knock sensor 1 | — | |
| W34 | OEM-X60003-34 | ELITE2500-B-22 | 0.5 | no route | Knock sensor 2 | — | |
| W35 | OEM-X60005-6 | ELITE2500-A-3 | 0.5 | no route | Ignition coil 1 | — | |
| W36 | OEM-X60005-7 | ELITE2500-A-4 | 0.5 | no route | Ignition coil 2 | — | |
| W37 | OEM-X60005-4 | ELITE2500-A-5 | 0.5 | no route | Ignition coil 3 | — | |
| W38 | OEM-X60005-8 | ELITE2500-A-6 | 0.5 | no route | Ignition coil 4 | — | |
| W39 | OEM-X60005-1 | ELITE2500-A-7 | 0.5 | no route | Ignition coil 5 | — | |
| W40 | OEM-X60005-9 | ELITE2500-A-8 | 0.5 | no route | Ignition coil 6 | — | |
| W41 | OEM-X60003-13 | ELITE2500-A-19 | 0.5 | no route | Injector cylinder 1 | — | |
| W42 | OEM-X60003-6 | ELITE2500-A-20 | 0.5 | no route | Injector cylinder 2 | — | |
| W43 | OEM-X60003-26 | ELITE2500-A-21 | 0.5 | no route | Injector cylinder 3 | — | |
| W44 | OEM-X60003-7 | ELITE2500-A-22 | 0.5 | no route | Injector cylinder 4 | — | |
| W45 | OEM-X60003-11 | ELITE2500-A-27 | 0.5 | no route | Injector cylinder 5 | — | |
| W46 | OEM-X60003-8 | ELITE2500-A-28 | 0.5 | no route | Injector cylinder 6 | — | |
| W47 | OEM-X60003-42 | ELITE2500-B-25 | 0.5 | no route | Throttle motor drive 1 (H-bridge) | — | |
| W48 | OEM-X60003-43 | ELITE2500-B-26 | 0.5 | no route | Throttle motor drive 2 (H-bridge) | — | |
| W49 | OEM-X60001-1 | ELITE2500-A-25 | 0.5 | no route | Injector relay control | — | |
| W50 | OEM-X60002-23 | ELITE2500-A-18 | 0.5 | no route | Main relay control | — | |
| W51 | OEM-X60004-10 | ELITE2500-A-24 | 0.5 | no route | Fuel pump relay control | — | |
| W52 | OEM-X60002-1 | ELITE2500-A-1 | 0.5 | no route | O2 sensor heater, front 1 (pre-cat) | — | |
| W53 | OEM-X60002-12 | ELITE2500-A-23 | 0.5 | no route | O2 sensor heater, rear 2 (post-cat) | — | |
| W54 | OEM-X60002-2 | ELITE2500-B-19 | 0.5 | no route | O2 sensor heater, front 2 (pre-cat) | — | |
| W55 | OEM-X60002-6 | ELITE2500-A-31 | 0.5 | no route | O2 sensor heater, rear 1 (post-cat) | — | |
| W56 | OEM-X60003-10 | ELITE2500-A-32 | 0.5 | no route | VANOS intake solenoid | — | |
| W57 | OEM-X60003-12 | ELITE2500-A-33 | 0.5 | no route | Map-controlled thermostat | — | |
| W58 | OEM-X60003-21 | ELITE2500-A-34 | 0.5 | no route | Evap purge valve | — | |
| W59 | OEM-X60003-9 | ELITE2500-A-29 | 0.5 | no route | VANOS exhaust solenoid | — | |
| W60 | OEM-X60003-1 | ELITE2500-B-13 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W61 | OEM-X60003-32 | ELITE2500-A-16 | 0.5 | no route | Throttle position sensor 1 | — | |
| W62 | OEM-X60004-8 | ELITE2500-A-17 | 0.5 | no route | Pedal position signal 1 | — | |
| W63 | OEM-X60003-31 | ELITE2500-A-2 | 0.5 | no route | Throttle position sensor 2 | — | |
| W64 | OEM-X60004-13 | ELITE2500-B-20 | 0.5 | no route | Pedal position signal 2 | — | |
| W65 | OEM-X60002-14 | ELITE2500-B-12 | 0.5 | no route | O2 sensor signal, rear 2 (post-cat) | — | |
| W66 | OEM-X60002-16 | ELITE2500-B-3 | 0.5 | no route | O2 sensor signal, rear 1 (post-cat) | — | |
| W67 | OEM-X60003-28 | ELITE2500-B-4 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W68 | OEM-X60003-27 | ELITE2500-A-15 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W69 | OEM-X60003-44 | ELITE2500-A-14 | 0.5 | no route | Engine oil temperature | — | |
| W70 | OEM-X60003-16 | ELITE2500-B-9 | 0.5 | no route | Oil pressure switch | — | |
| W71 | OEM-X60003-50 | ELITE2500-B-10 | 0.5 | no route | Oil level switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | BMW-E46-MSS54-CONN | BMW | E46 DME (MSS54) harness connector | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (13)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | DBW_MOTOR_CURRENT | ELITE2500-B-25 | Cannot confirm Elite 2500 can drive the throttle motor: ELITE2500-B-25 "DBW 1 / DPO" is rated 5.0 A, but the motor current at OEM-X60003-42 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | ELITE2500-B-26 | Cannot confirm Elite 2500 can drive the throttle motor: ELITE2500-B-26 "DBW 2 / DPO" is rated 5.0 A, but the motor current at OEM-X60003-43 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | NET_FAMILY | OEM-X60003-29 ↔ ELITE2500-B-8 | OEM-X60003-29 "Intake camshaft position" [trigger_in] is wired to ELITE2500-B-8 "SPI 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-X60002-6 ↔ ELITE2500-A-31 | OEM-X60002-6 "O2 sensor heater, rear 1 (post-cat)" [low_side_out] is wired to ELITE2500-A-31 "Stepper 1 P1 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-10 ↔ ELITE2500-A-32 | OEM-X60003-10 "VANOS intake solenoid" [low_side_out] is wired to ELITE2500-A-32 "Stepper 1 P2 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-12 ↔ ELITE2500-A-33 | OEM-X60003-12 "Map-controlled thermostat" [low_side_out] is wired to ELITE2500-A-33 "Stepper 1 P3 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-21 ↔ ELITE2500-A-34 | OEM-X60003-21 "Evap purge valve" [low_side_out] is wired to ELITE2500-A-34 "Stepper 1 P4 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-27 ↔ ELITE2500-A-15 | OEM-X60003-27 "Intake air temperature (IAT)" [temp_in] is wired to ELITE2500-A-15 "AVI 9 (MAP)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-X60003-28 ↔ ELITE2500-B-4 | OEM-X60003-28 "Engine coolant temperature (ECT)" [temp_in] is wired to ELITE2500-B-4 "AVI 8 (Coolant Temp)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-X60003-44 ↔ ELITE2500-A-14 | OEM-X60003-44 "Engine oil temperature" [temp_in] is wired to ELITE2500-A-14 "AVI 10 (TPS)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-X60003-49 ↔ ELITE2500-B-5 | OEM-X60003-49 "Exhaust camshaft ground" [sensor_ground] is wired to ELITE2500-B-5 "Crank (Trigger) (−)" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-X60003-9 ↔ ELITE2500-A-29 | OEM-X60003-9 "VANOS exhaust solenoid" [low_side_out] is wired to ELITE2500-A-29 "INJ 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 4 optional OEM pins are not mapped: OEM-X60003-22 Idle speed control, close; OEM-X60003-23 Idle speed control, open; OEM-X60003-46 Knock sensor 3; OEM-X60003-47 Knock sensor 4 |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X60001-7 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Needs CAN (E46 K-bus/CAN); not documented for this ECU - Trigger pattern for BMW S54 not found in the ECU's docs (no BMW S-series trigger preset named) - This car has EWS 3.3 (rolling code) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Not wired: - OEM-X60001 7: Battery constant (terminal 30): Haltech Elite 2500 has no battery-constant input; not needed - OEM-X60003 46: Knock sensor 3: no free knock input on Haltech Elite 2500 - OEM-X60003 47: Knock sensor 4: no free knock input on Haltech Elite 2500 - OEM-X60003 22: Idle speed control, close: no free hbridge on Haltech Elite 2500 - OEM-X60003 23: Idle speed control, open: no free hbridge on Haltech Elite 2500 - ELITE2500-A 13: 12V ignition input: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | oem_wiring_diagram | BMW WDS A6000 DME pin table, E83 X3 (M54B30/MS45) | https://wds.psjr.org/sv/e83/zinfo/E83_PA6000A.htm | — | — | — |
| 4 | vendor_doc | Haltech Elite 2500 (HT-151300) spec sheet | https://joeblospeedshop.com/wp-content/uploads/2023/11/HT-151300_SPEC-SHEET-2500-ELITE.pdf | archive | 2026-10-05 | c97da78cb851 |
| 4 | vendor_doc | Haltech Elite 2500 — 26-pin connector pinout | https://support.haltech.com/portal/en/kb/articles/main-connector-26-pin-elite2500 | archive | 2026-10-05 | ea6fd4d27ac7 |
| 4 | vendor_doc | Haltech Elite 2500 — 34-pin main connector pinout | https://support.haltech.com/portal/en/kb/articles/main-connector-34-pin-elite2500 | archive | 2026-10-05 | 4e633dff8340 |
| 2 | community_copy | bimmer-service: DME MSS54 (S54) pinout | https://www.bimmer-service.com/2025/11/14/dme-mss54-s54-pinout-schematic-diagram/ | — | — | — |
| 2 | community_copy | rusefi wiki: 2002 and 2004 BMW M3 E46 DME pinout (S54/MSS54) | https://github.com/rusefi/rusefi/wiki/2002-and-2004-BMW-M3-E46-DME-pinout | — | — | — |