Honda NSX NA1 1991-2005 (C30A) → ECUMASTER EMU Black (auto)
Honda NSX NA1 1991-2005 (C30A) — ECUMASTER — EMU Black
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-08
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 66 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-25 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A-23 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A-24 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-B-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-A-26 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-B-10 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-B-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-B-14 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-B-16 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-D-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-D-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-D-18 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-D-19 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-D-20 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-B-15 | EMUBLACK-Black-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-B-13 | EMUBLACK-Black-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-B-11 | EMUBLACK-Black-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-B-9 | EMUBLACK-Black-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-D-4 | EMUBLACK-Black-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-D-3 | EMUBLACK-Black-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-A-21 | EMUBLACK-Grey-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A-22 | EMUBLACK-Grey-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-B-8 | EMUBLACK-Grey-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-B-6 | EMUBLACK-Black-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-B-4 | EMUBLACK-Black-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-B-3 | EMUBLACK-Grey-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-A-1 | EMUBLACK-Grey-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A-3 | EMUBLACK-Grey-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-5 | EMUBLACK-Grey-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A-2 | EMUBLACK-Grey-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A-4 | EMUBLACK-Grey-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A-6 | EMUBLACK-Grey-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A-8 | EMUBLACK-Grey-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A-15 | EMUBLACK-Grey-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A-18 | EMUBLACK-Grey-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A-7 | EMUBLACK-Grey-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-5-F5 | EMUBLACK-Grey-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-5-F7 | EMUBLACK-Grey-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A-10 | EMUBLACK-Grey-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A-12 | EMUBLACK-Grey-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A-11 | EMUBLACK-Grey-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A-13 | EMUBLACK-Grey-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-A-14 | EMUBLACK-Grey-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-D-17 | EMUBLACK-Black-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-D-11 | EMUBLACK-Black-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-D-14 | EMUBLACK-Black-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-D-16 | EMUBLACK-Black-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-D-13 | EMUBLACK-Black-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-D-15 | EMUBLACK-Black-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-D-12 | EMUBLACK-Black-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-C-2 | EMUBLACK-Black-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-D-9 | EMUBLACK-Black-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-5-F2 | EMUBLACK-Black-36 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-5-F4 | EMUBLACK-Black-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-B-7 | EMUBLACK-Black-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-C-11 | EMUBLACK-Black-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUBLACK-Black-13 | EMUBLACK-Black-29 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | EMUBLACK-Black-13 | EMUBLACK-Black-26 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 3 | EMUBLACK-Black-27 | EMUBLACK-Black-13 | open (OL) | power ground must not touch +12 V supply | |
| 4 | EMUBLACK-Black-27 | EMUBLACK-Black-26 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | EMUBLACK-Black-29 | EMUBLACK-Black-26 | open (OL) | sensor ground must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUBLACK-Black
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #5 | — | W35 | — | 0.5 | OEM-B-4 | — | — | — |
| 10 | Switch #1 In | — | W61 | — | 0.5 | OEM-C-2 | — | — | — |
| 11 | RS232 TXD | — | — | — | — | — | — | — | — |
| 12 | CAN H | — | — | — | — | — | — | — | — |
| 13 | Battery +12V | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Ignition coil #4 | — | W34 | — | 0.5 | OEM-B-6 | — | — | — |
| 15 | EGT in #2 | — | — | — | — | — | — | — | — |
| 16 | Knock Sensor in #2 | — | W30 | — | 0.5 | OEM-D-3 | — | — | — |
| 17 | Analog In #3 | — | W57 | — | 0.5 | OEM-D-16 | — | — | — |
| 18 | TPS In | — | W55 | — | 0.5 | OEM-D-11 | — | — | — |
| 19 | WBO Ip | — | — | — | — | — | — | — | — |
| 2 | EGT in #1 | — | — | — | — | — | — | — | — |
| 20 | VSS In | — | W26 | — | 0.5 | OEM-B-13 | — | — | — |
| 21 | Camsync In #1 | — | W27 | — | 0.5 | OEM-B-11 | — | — | — |
| 22 | WBO Rcal | — | — | — | — | — | — | — | — |
| 23 | Switch #2 In | — | W62 | — | 0.5 | OEM-D-9 | — | — | — |
| 24 | RS232 RXD | — | — | — | — | — | — | — | — |
| 25 | CAN L | — | — | — | — | — | — | — | — |
| 26 | +5V supply | — | W24 | — | 0.5 | SP-5V1-1 | — | — | — |
| 27 | Power Ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 28 | Ecu Ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Sensor Ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Knock Sensor in #1 | — | W29 | — | 0.5 | OEM-D-4 | — | — | — |
| 30 | Analog In #4 | — | W60 | — | 0.5 | OEM-D-12 | — | — | — |
| 31 | Analog In #1 | — | W54 | — | 0.5 | OEM-D-17 | — | — | — |
| 32 | IAT In | — | W58 | — | 0.5 | OEM-D-13 | — | — | — |
| 33 | WBO VGND | — | — | — | — | — | — | — | — |
| 34 | +5V supply | — | — | — | — | — | — | — | — |
| 35 | Analog In #5 | — | W64 | — | 0.5 | OEM-5-F4 | — | — | — |
| 36 | Switch #3 In | — | W63 | — | 0.5 | OEM-5-F2 | — | — | — |
| 37 | Analog In #6 | — | W65 | — | 0.5 | OEM-B-7 | — | — | — |
| 38 | Sensor Ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 39 | Sensor Ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | Analog In #2 | — | W56 | — | 0.5 | OEM-D-14 | — | — | — |
| 5 | CLT In | — | W59 | — | 0.5 | OEM-D-15 | — | — | — |
| 6 | WBO Vs | — | — | — | — | — | — | — | — |
| 7 | Camsync In #2 | — | W28 | — | 0.5 | OEM-B-9 | — | — | — |
| 8 | Primary trigger | — | W25 | — | 0.5 | OEM-B-15 | — | — | — |
| 9 | Flex Fuel In | — | W66 | — | 0.5 | OEM-C-11 | — | — | — |
EMUBLACK-Grey
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #6 | — | W36 | — | 0.5 | OEM-B-3 | — | — | — |
| 10 | H-Bridge #1 Winding B | — | W47 | — | 0.5 | OEM-5-F5 | — | — | — |
| 11 | H-Bridge #2 Winding B | — | W52 | — | 0.5 | OEM-A-13 | — | — | — |
| 12 | AUX 5 | — | W50 | — | 0.5 | OEM-A-12 | — | — | — |
| 13 | AUX 2 / Injector #8 | — | W44 | — | 0.5 | OEM-A-15 | — | — | — |
| 14 | Injector #5 | — | W41 | — | 0.5 | OEM-A-4 | — | — | — |
| 15 | Injector #2 | — | W38 | — | 0.5 | OEM-A-3 | — | — | — |
| 16 | Ignition coil #2 | — | W32 | — | 0.5 | OEM-A-22 | — | — | — |
| 17 | Power Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition +12V | — | — | — | — | — | — | — | — |
| 19 | WBO Heater | — | W49 | — | 0.5 | OEM-A-10 | — | — | — |
| 2 | H-Bridge #1 Winding A | — | W48 | — | 0.5 | OEM-5-F7 | — | — | — |
| 20 | AUX 4 / Tacho | — | W46 | — | 0.5 | OEM-A-7 | — | — | — |
| 21 | AUX 1 / Injector #7 | — | W43 | — | 0.5 | OEM-A-8 | — | — | — |
| 22 | Injector #6 | — | W42 | — | 0.5 | OEM-A-6 | — | — | — |
| 23 | Injector #3 | — | W39 | — | 0.5 | OEM-A-5 | — | — | — |
| 24 | Power Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | H-Bridge #2 Winding A | — | W53 | — | 0.5 | OEM-A-14 | — | — | — |
| 4 | AUX 6 | — | W51 | — | 0.5 | OEM-A-11 | — | — | — |
| 5 | AUX 3 | — | W45 | — | 0.5 | OEM-A-18 | — | — | — |
| 6 | Injector #4 | — | W40 | — | 0.5 | OEM-A-2 | — | — | — |
| 7 | Injector #1 | — | W37 | — | 0.5 | OEM-A-1 | — | — | — |
| 8 | Ignition coil #1 | — | W31 | — | 0.5 | OEM-A-21 | — | — | — |
| 9 | Ignition coil #3 | — | W33 | — | 0.5 | OEM-B-8 | — | — | — |
OEM-5
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| F2 | Front VTEC pressure switch | — | W63 | — | 0.5 | EMUBLACK-Black-36 | — | — | — |
| F4 | Rear VTEC pressure switch | — | W64 | — | 0.5 | EMUBLACK-Black-35 | — | — | — |
| F5 | Front VTEC solenoid valve | — | W47 | — | 0.5 | EMUBLACK-Grey-10 | — | — | — |
| F7 | Rear VTEC solenoid valve | — | W48 | — | 0.5 | EMUBLACK-Grey-2 | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 1 | — | W37 | — | 0.5 | EMUBLACK-Grey-7 | — | — | — |
| 10 | Front O2 sensor heater (HTCNTF) | — | W49 | — | 0.5 | EMUBLACK-Grey-19 | — | — | — |
| 11 | EGR control solenoid | — | W51 | — | 0.5 | EMUBLACK-Grey-4 | — | — | — |
| 12 | Rear O2 sensor heater (HTCNTR) | — | W50 | — | 0.5 | EMUBLACK-Grey-12 | — | — | — |
| 13 | Check engine light (WARN) | — | W52 | — | 0.5 | EMUBLACK-Grey-11 | — | — | — |
| 14 | Chamber volume control solenoid (BPS) | — | W53 | — | 0.5 | EMUBLACK-Grey-3 | — | — | — |
| 15 | A/C clutch relay (ACC) | — | W44 | — | 0.5 | EMUBLACK-Grey-13 | — | — | — |
| 18 | Radiator fan control (FANCNTR) | — | W45 | — | 0.5 | EMUBLACK-Grey-5 | — | — | — |
| 2 | Injector 4 | — | W40 | — | 0.5 | EMUBLACK-Grey-6 | — | — | — |
| 20 | EVAP purge cut-off solenoid (PGS) | — | — | — | — | — | — | — | — |
| 21 | Ignition coil 1 | — | W31 | — | 0.5 | EMUBLACK-Grey-8 | — | — | — |
| 22 | Ignition coil 2 | — | W32 | — | 0.5 | EMUBLACK-Grey-16 | — | — | — |
| 23 | Power ground (PG1) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 24 | Power ground (PG2) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | ECU power (IGP1) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | Sensor ground (LG1) | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Injector 2 | — | W38 | — | 0.5 | EMUBLACK-Grey-15 | — | — | — |
| 4 | Injector 5 | — | W41 | — | 0.5 | EMUBLACK-Grey-14 | — | — | — |
| 5 | Injector 3 | — | W39 | — | 0.5 | EMUBLACK-Grey-23 | — | — | — |
| 6 | Injector 6 | — | W42 | — | 0.5 | EMUBLACK-Grey-22 | — | — | — |
| 7 | Main relay | — | W46 | — | 0.5 | EMUBLACK-Grey-20 | — | — | — |
| 8 | Fuel pump relay 2 (FLR2) | — | W43 | — | 0.5 | EMUBLACK-Grey-21 | — | — | — |
| 9 | Idle air control valve (IACV) | — | — | — | — | — | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | CYL 2M — CYP sensor 2 return | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 11 | CYL 1P — CYP sensor 1 signal | — | W27 | — | 0.5 | EMUBLACK-Black-21 | — | — | — |
| 12 | CYL 1M — CYP sensor 1 return | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | CRNK 2P — TDC sensor signal | — | W26 | — | 0.5 | EMUBLACK-Black-20 | — | — | — |
| 14 | CRNK 2M — TDC sensor return | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | CRNK 1P — crank sensor signal | — | W25 | — | 0.5 | EMUBLACK-Black-8 | — | — | — |
| 16 | CRNK 1M — crank sensor return | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Chassis ground (LG2) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | Ignition coil 6 | — | W36 | — | 0.5 | EMUBLACK-Grey-1 | — | — | — |
| 4 | Ignition coil 5 | — | W35 | — | 0.5 | EMUBLACK-Black-1 | — | — | — |
| 6 | Ignition coil 4 | — | W34 | — | 0.5 | EMUBLACK-Black-14 | — | — | — |
| 7 | Neutral switch (M/T) / gear position (A/T) | — | W65 | — | 0.5 | EMUBLACK-Black-37 | — | — | — |
| 8 | Ignition coil 3 | — | W33 | — | 0.5 | EMUBLACK-Grey-9 | — | — | — |
| 9 | CYL 2P — CYP sensor 2 signal | — | W28 | — | 0.5 | EMUBLACK-Black-7 | — | — | — |
OEM-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU power (IGP2) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 10 | Traction control | — | — | — | — | — | — | — | — |
| 11 | Starter switch (STS) | — | W66 | — | 0.5 | EMUBLACK-Black-9 | — | — | — |
| 12 | Traction control | — | — | — | — | — | — | — | — |
| 2 | Vehicle speed sensor (VSS) | — | W61 | — | 0.5 | EMUBLACK-Black-10 | — | — | — |
| 3 | A/C switch (ACS) | — | — | — | — | — | — | — | — |
| 4 | Tachometer output (NEP) | — | — | — | — | — | — | — | — |
| 5 | A/C pressure switch (PDSW) | — | — | — | — | — | — | — | — |
| 6 | Traction control | — | — | — | — | — | — | — | — |
| 7 | Clutch switch (M/T) | — | — | — | — | — | — | — | — |
| 8 | Traction control | — | — | — | — | — | — | — | — |
| 9 | Service check connector (SCS) | — | — | — | — | — | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery backup (VBU) | — | — | — | — | — | — | — | — |
| 11 | Throttle position sensor (TPS) | — | W55 | — | 0.5 | EMUBLACK-Black-18 | — | — | — |
| 12 | EGR lift sensor (EGRL) | — | W60 | — | 0.5 | EMUBLACK-Black-30 | — | — | — |
| 13 | Engine coolant temperature (ECT) | — | W58 | — | 0.5 | EMUBLACK-Black-32 | — | — | — |
| 14 | Primary O2 sensor | — | W56 | — | 0.5 | EMUBLACK-Black-4 | — | — | — |
| 15 | Intake air temperature (IAT) | — | W59 | — | 0.5 | EMUBLACK-Black-5 | — | — | — |
| 16 | Secondary O2 sensor | — | W57 | — | 0.5 | EMUBLACK-Black-17 | — | — | — |
| 17 | MAP sensor | — | W54 | — | 0.5 | EMUBLACK-Black-31 | — | — | — |
| 18 | +5V sensor supply (VCC) | — | W21 | — | 0.5 | SP-5V1-1 | — | — | — |
| 19 | +5V sensor supply (VCC) | — | W22 | — | 0.5 | SP-5V1-1 | — | — | — |
| 20 | +5V sensor supply (VCC) | — | W23 | — | 0.5 | SP-5V1-1 | — | — | — |
| 21 | Sensor ground (SG) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Sensor ground (SG) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Knock sensor — rear | — | W30 | — | 0.5 | EMUBLACK-Black-16 | — | — | — |
| 4 | Knock sensor — front | — | W29 | — | 0.5 | EMUBLACK-Black-3 | — | — | — |
| 5 | Traction control | — | — | — | — | — | — | — | — |
| 6 | Fuel pump voltage monitor (VFP) | — | — | — | — | — | — | — | — |
| 8 | Ignition timing adjuster (IGADJ) | — | — | — | — | — | — | — | — |
| 9 | Alternator FR signal | — | W62 | — | 0.5 | EMUBLACK-Black-23 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W11 | — | 0.5 | OEM-A-26 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-B-10 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-B-12 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-B-14 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-B-16 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-D-21 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-D-22 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | EMUBLACK-Black-29 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | EMUBLACK-Black-38 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | EMUBLACK-Black-39 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-25 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C-1 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | EMUBLACK-Black-13 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W21 | — | 0.5 | OEM-D-18 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-D-19 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-D-20 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | EMUBLACK-Black-26 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-A-23 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A-24 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-B-2 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | EMUBLACK-Black-27 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | EMUBLACK-Black-28 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | EMUBLACK-Grey-17 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | EMUBLACK-Grey-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-5-F2 | Front VTEC pressure switch | digital_in | EMUBLACK-Black-36 | Switch #3 In | digital_in | single_source | |
| OEM-5-F4 | Rear VTEC pressure switch | digital_in | EMUBLACK-Black-35 | Analog In #5 | analog_in | single_source | |
| OEM-5-F5 | Front VTEC solenoid valve | high_side_out | EMUBLACK-Grey-10 | H-Bridge #1 Winding B | hbridge_out | single_source | |
| OEM-5-F7 | Rear VTEC solenoid valve | high_side_out | EMUBLACK-Grey-2 | H-Bridge #1 Winding A | hbridge_out | single_source | |
| OEM-A-1 | Injector 1 | injector_out | EMUBLACK-Grey-7 | Injector #1 | injector_out | single_source | |
| OEM-A-10 | Front O2 sensor heater (HTCNTF) | low_side_out | EMUBLACK-Grey-19 | WBO Heater | low_side_out | single_source | |
| OEM-A-11 | EGR control solenoid | low_side_out | EMUBLACK-Grey-4 | AUX 6 | low_side_out | single_source | |
| OEM-A-12 | Rear O2 sensor heater (HTCNTR) | low_side_out | EMUBLACK-Grey-12 | AUX 5 | low_side_out | single_source | |
| OEM-A-13 | Check engine light (WARN) | low_side_out | EMUBLACK-Grey-11 | H-Bridge #2 Winding B | hbridge_out | single_source | |
| OEM-A-14 | Chamber volume control solenoid (BPS) | low_side_out | EMUBLACK-Grey-3 | H-Bridge #2 Winding A | hbridge_out | single_source | |
| OEM-A-15 | A/C clutch relay (ACC) | low_side_out | EMUBLACK-Grey-13 | AUX 2 / Injector #8 | low_side_out | single_source | |
| OEM-A-18 | Radiator fan control (FANCNTR) | low_side_out | EMUBLACK-Grey-5 | AUX 3 | low_side_out | single_source | |
| OEM-A-2 | Injector 4 | injector_out | EMUBLACK-Grey-6 | Injector #4 | injector_out | single_source | |
| OEM-A-20 | EVAP purge cut-off solenoid (PGS) | low_side_out | — | — | — | single_source | |
| OEM-A-21 | Ignition coil 1 | ignition_out | EMUBLACK-Grey-8 | Ignition coil #1 | ignition_out | single_source | |
| OEM-A-22 | Ignition coil 2 | ignition_out | EMUBLACK-Grey-16 | Ignition coil #2 | ignition_out | single_source | |
| OEM-A-23 | Power ground (PG1) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A-24 | Power ground (PG2) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A-25 | ECU power (IGP1) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-A-26 | Sensor ground (LG1) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A-3 | Injector 2 | injector_out | EMUBLACK-Grey-15 | Injector #2 | injector_out | single_source | |
| OEM-A-4 | Injector 5 | injector_out | EMUBLACK-Grey-14 | Injector #5 | injector_out | corroborated | |
| OEM-A-5 | Injector 3 | injector_out | EMUBLACK-Grey-23 | Injector #3 | injector_out | single_source | |
| OEM-A-6 | Injector 6 | injector_out | EMUBLACK-Grey-22 | Injector #6 | injector_out | single_source | |
| OEM-A-7 | Main relay | low_side_out | EMUBLACK-Grey-20 | AUX 4 / Tacho | low_side_out | single_source | |
| OEM-A-8 | Fuel pump relay 2 (FLR2) | low_side_out | EMUBLACK-Grey-21 | AUX 1 / Injector #7 | low_side_out | single_source | |
| OEM-A-9 | Idle air control valve (IACV) | low_side_out | — | — | — | single_source | |
| OEM-B-10 | CYL 2M — CYP sensor 2 return | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-11 | CYL 1P — CYP sensor 1 signal | trigger_in | EMUBLACK-Black-21 | Camsync In #1 | trigger_in | single_source | |
| OEM-B-12 | CYL 1M — CYP sensor 1 return | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-13 | CRNK 2P — TDC sensor signal | trigger_in | EMUBLACK-Black-20 | VSS In | digital_in | single_source | |
| OEM-B-14 | CRNK 2M — TDC sensor return | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-15 | CRNK 1P — crank sensor signal | trigger_in | EMUBLACK-Black-8 | Primary trigger | trigger_in | single_source | |
| OEM-B-16 | CRNK 1M — crank sensor return | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-2 | Chassis ground (LG2) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-B-3 | Ignition coil 6 | ignition_out | EMUBLACK-Grey-1 | Ignition coil #6 | ignition_out | single_source | |
| OEM-B-4 | Ignition coil 5 | ignition_out | EMUBLACK-Black-1 | Ignition coil #5 | ignition_out | single_source | |
| OEM-B-6 | Ignition coil 4 | ignition_out | EMUBLACK-Black-14 | Ignition coil #4 | ignition_out | single_source | |
| OEM-B-7 | Neutral switch (M/T) / gear position (A/T) | digital_in | EMUBLACK-Black-37 | Analog In #6 | analog_in | single_source | |
| OEM-B-8 | Ignition coil 3 | ignition_out | EMUBLACK-Grey-9 | Ignition coil #3 | ignition_out | single_source | |
| OEM-B-9 | CYL 2P — CYP sensor 2 signal | trigger_in | EMUBLACK-Black-7 | Camsync In #2 | trigger_in | single_source | |
| OEM-C-1 | ECU power (IGP2) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-C-10 | Traction control | — | — | — | — | single_source | |
| OEM-C-11 | Starter switch (STS) | digital_in | EMUBLACK-Black-9 | Flex Fuel In | analog_in | single_source | |
| OEM-C-12 | Traction control | — | — | — | — | single_source | |
| OEM-C-2 | Vehicle speed sensor (VSS) | digital_in | EMUBLACK-Black-10 | Switch #1 In | digital_in | single_source | |
| OEM-C-3 | A/C switch (ACS) | digital_in | — | — | — | single_source | |
| OEM-C-4 | Tachometer output (NEP) | tacho_out | — | — | — | single_source | |
| OEM-C-5 | A/C pressure switch (PDSW) | digital_in | — | — | — | single_source | |
| OEM-C-6 | Traction control | — | — | — | — | single_source | |
| OEM-C-7 | Clutch switch (M/T) | digital_in | — | — | — | single_source | |
| OEM-C-8 | Traction control | — | — | — | — | single_source | |
| OEM-C-9 | Service check connector (SCS) | digital_in | — | — | — | single_source | |
| OEM-D-1 | Battery backup (VBU) | power_in | — | — | — | single_source | |
| OEM-D-11 | Throttle position sensor (TPS) | analog_in | EMUBLACK-Black-18 | TPS In | analog_in | single_source | |
| OEM-D-12 | EGR lift sensor (EGRL) | analog_in | EMUBLACK-Black-30 | Analog In #4 | analog_in | single_source | |
| OEM-D-13 | Engine coolant temperature (ECT) | temp_in | EMUBLACK-Black-32 | IAT In | temp_in | single_source | |
| OEM-D-14 | Primary O2 sensor | lambda_nb_in | EMUBLACK-Black-4 | Analog In #2 | analog_in | single_source | |
| OEM-D-15 | Intake air temperature (IAT) | temp_in | EMUBLACK-Black-5 | CLT In | temp_in | single_source | |
| OEM-D-16 | Secondary O2 sensor | lambda_nb_in | EMUBLACK-Black-17 | Analog In #3 | analog_in | single_source | |
| OEM-D-17 | MAP sensor | analog_in | EMUBLACK-Black-31 | Analog In #1 | analog_in | single_source | |
| OEM-D-18 | +5V sensor supply (VCC) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-D-19 | +5V sensor supply (VCC) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-D-20 | +5V sensor supply (VCC) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-D-21 | Sensor ground (SG) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-D-22 | Sensor ground (SG) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-D-3 | Knock sensor — rear | knock_in | EMUBLACK-Black-16 | Knock Sensor in #2 | knock_in | single_source | |
| OEM-D-4 | Knock sensor — front | knock_in | EMUBLACK-Black-3 | Knock Sensor in #1 | knock_in | single_source | |
| OEM-D-5 | Traction control | — | — | — | — | single_source | |
| OEM-D-6 | Fuel pump voltage monitor (VFP) | — | — | — | — | corroborated | |
| OEM-D-8 | Ignition timing adjuster (IGADJ) | digital_in | — | — | — | single_source | |
| OEM-D-9 | Alternator FR signal | digital_in | EMUBLACK-Black-23 | Switch #2 In | digital_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-25 | SP-14V-1 | 0.85 | no route | ECU power (IGP1) | — | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | no route | ECU power (IGP2) | — | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | no route | Battery +12V | — | |
| W4 | OEM-A-23 | SP-GND-1 | 0.85 | no route | Power ground (PG1) | — | |
| W5 | OEM-A-24 | SP-GND-1 | 0.85 | no route | Power ground (PG2) | — | |
| W6 | OEM-B-2 | SP-GND-1 | 0.85 | no route | Chassis ground (LG2) | — | |
| W7 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | no route | Power Ground | — | |
| W8 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | no route | Ecu Ground | — | |
| W9 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | no route | Power Ground | — | |
| W10 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | no route | Power Ground | — | |
| W11 | OEM-A-26 | SP-0V-1 | 0.5 | no route | Sensor ground (LG1) | — | |
| W12 | OEM-B-10 | SP-0V-1 | 0.5 | no route | CYL 2M — CYP sensor 2 return | — | |
| W13 | OEM-B-12 | SP-0V-1 | 0.5 | no route | CYL 1M — CYP sensor 1 return | — | |
| W14 | OEM-B-14 | SP-0V-1 | 0.5 | no route | CRNK 2M — TDC sensor return | — | |
| W15 | OEM-B-16 | SP-0V-1 | 0.5 | no route | CRNK 1M — crank sensor return | — | |
| W16 | OEM-D-21 | SP-0V-1 | 0.5 | no route | Sensor ground (SG) | — | |
| W17 | OEM-D-22 | SP-0V-1 | 0.5 | no route | Sensor ground (SG) | — | |
| W18 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | no route | Sensor Ground | — | |
| W19 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | no route | Sensor Ground | — | |
| W20 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | no route | Sensor Ground | — | |
| W21 | OEM-D-18 | SP-5V1-1 | 0.5 | no route | +5V sensor supply (VCC) | — | |
| W22 | OEM-D-19 | SP-5V1-1 | 0.5 | no route | +5V sensor supply (VCC) | — | |
| W23 | OEM-D-20 | SP-5V1-1 | 0.5 | no route | +5V sensor supply (VCC) | — | |
| W24 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | no route | +5V supply | — | |
| W25 | OEM-B-15 | EMUBLACK-Black-8 | 0.5 | no route | CRNK 1P — crank sensor signal | — | |
| W26 | OEM-B-13 | EMUBLACK-Black-20 | 0.5 | no route | CRNK 2P — TDC sensor signal | — | |
| W27 | OEM-B-11 | EMUBLACK-Black-21 | 0.5 | no route | CYL 1P — CYP sensor 1 signal | — | |
| W28 | OEM-B-9 | EMUBLACK-Black-7 | 0.5 | no route | CYL 2P — CYP sensor 2 signal | — | |
| W29 | OEM-D-4 | EMUBLACK-Black-3 | 0.5 | no route | Knock sensor — front | — | |
| W30 | OEM-D-3 | EMUBLACK-Black-16 | 0.5 | no route | Knock sensor — rear | — | |
| W31 | OEM-A-21 | EMUBLACK-Grey-8 | 0.5 | no route | Ignition coil 1 | — | |
| W32 | OEM-A-22 | EMUBLACK-Grey-16 | 0.5 | no route | Ignition coil 2 | — | |
| W33 | OEM-B-8 | EMUBLACK-Grey-9 | 0.5 | no route | Ignition coil 3 | — | |
| W34 | OEM-B-6 | EMUBLACK-Black-14 | 0.5 | no route | Ignition coil 4 | — | |
| W35 | OEM-B-4 | EMUBLACK-Black-1 | 0.5 | no route | Ignition coil 5 | — | |
| W36 | OEM-B-3 | EMUBLACK-Grey-1 | 0.5 | no route | Ignition coil 6 | — | |
| W37 | OEM-A-1 | EMUBLACK-Grey-7 | 0.5 | no route | Injector 1 | — | |
| W38 | OEM-A-3 | EMUBLACK-Grey-15 | 0.5 | no route | Injector 2 | — | |
| W39 | OEM-A-5 | EMUBLACK-Grey-23 | 0.5 | no route | Injector 3 | — | |
| W40 | OEM-A-2 | EMUBLACK-Grey-6 | 0.5 | no route | Injector 4 | — | |
| W41 | OEM-A-4 | EMUBLACK-Grey-14 | 0.5 | no route | Injector 5 | — | |
| W42 | OEM-A-6 | EMUBLACK-Grey-22 | 0.5 | no route | Injector 6 | — | |
| W43 | OEM-A-8 | EMUBLACK-Grey-21 | 0.5 | no route | Fuel pump relay 2 (FLR2) | — | |
| W44 | OEM-A-15 | EMUBLACK-Grey-13 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W45 | OEM-A-18 | EMUBLACK-Grey-5 | 0.5 | no route | Radiator fan control (FANCNTR) | — | |
| W46 | OEM-A-7 | EMUBLACK-Grey-20 | 0.5 | no route | Main relay | — | |
| W47 | OEM-5-F5 | EMUBLACK-Grey-10 | 0.5 | no route | Front VTEC solenoid valve | — | |
| W48 | OEM-5-F7 | EMUBLACK-Grey-2 | 0.5 | no route | Rear VTEC solenoid valve | — | |
| W49 | OEM-A-10 | EMUBLACK-Grey-19 | 0.5 | no route | Front O2 sensor heater (HTCNTF) | — | |
| W50 | OEM-A-12 | EMUBLACK-Grey-12 | 0.5 | no route | Rear O2 sensor heater (HTCNTR) | — | |
| W51 | OEM-A-11 | EMUBLACK-Grey-4 | 0.5 | no route | EGR control solenoid | — | |
| W52 | OEM-A-13 | EMUBLACK-Grey-11 | 0.5 | no route | Check engine light (WARN) | — | |
| W53 | OEM-A-14 | EMUBLACK-Grey-3 | 0.5 | no route | Chamber volume control solenoid (BPS) | — | |
| W54 | OEM-D-17 | EMUBLACK-Black-31 | 0.5 | no route | MAP sensor | — | |
| W55 | OEM-D-11 | EMUBLACK-Black-18 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W56 | OEM-D-14 | EMUBLACK-Black-4 | 0.5 | no route | Primary O2 sensor | — | |
| W57 | OEM-D-16 | EMUBLACK-Black-17 | 0.5 | no route | Secondary O2 sensor | — | |
| W58 | OEM-D-13 | EMUBLACK-Black-32 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W59 | OEM-D-15 | EMUBLACK-Black-5 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W60 | OEM-D-12 | EMUBLACK-Black-30 | 0.5 | no route | EGR lift sensor (EGRL) | — | |
| W61 | OEM-C-2 | EMUBLACK-Black-10 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W62 | OEM-D-9 | EMUBLACK-Black-23 | 0.5 | no route | Alternator FR signal | — | |
| W63 | OEM-5-F2 | EMUBLACK-Black-36 | 0.5 | no route | Front VTEC pressure switch | — | |
| W64 | OEM-5-F4 | EMUBLACK-Black-35 | 0.5 | no route | Rear VTEC pressure switch | — | |
| W65 | OEM-B-7 | EMUBLACK-Black-37 | 0.5 | no route | Neutral switch (M/T) / gear position (A/T) | — | |
| W66 | OEM-C-11 | EMUBLACK-Black-9 | 0.5 | no route | Starter switch (STS) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (9)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-5-F4 ↔ EMUBLACK-Black-35 | OEM-5-F4 "Rear VTEC pressure switch" [digital_in] is wired to EMUBLACK-Black-35 "Analog In #5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-5-F5 ↔ EMUBLACK-Grey-10 | OEM-5-F5 "Front VTEC solenoid valve" [high_side_out] is wired to EMUBLACK-Grey-10 "H-Bridge #1 Winding B" [hbridge_out]. A half-bridge can act as a high-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-5-F7 ↔ EMUBLACK-Grey-2 | OEM-5-F7 "Rear VTEC solenoid valve" [high_side_out] is wired to EMUBLACK-Grey-2 "H-Bridge #1 Winding A" [hbridge_out]. A half-bridge can act as a high-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-A-13 ↔ EMUBLACK-Grey-11 | OEM-A-13 "Check engine light (WARN)" [low_side_out] is wired to EMUBLACK-Grey-11 "H-Bridge #2 Winding B" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-A-14 ↔ EMUBLACK-Grey-3 | OEM-A-14 "Chamber volume control solenoid (BPS)" [low_side_out] is wired to EMUBLACK-Grey-3 "H-Bridge #2 Winding A" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-B-13 ↔ EMUBLACK-Black-20 | OEM-B-13 "CRNK 2P — TDC sensor signal" [trigger_in] is wired to EMUBLACK-Black-20 "VSS In" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-B-7 ↔ EMUBLACK-Black-37 | OEM-B-7 "Neutral switch (M/T) / gear position (A/T)" [digital_in] is wired to EMUBLACK-Black-37 "Analog In #6" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-C-11 ↔ EMUBLACK-Black-9 | OEM-C-11 "Starter switch (STS)" [digital_in] is wired to EMUBLACK-Black-9 "Flex Fuel In" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | UNMAPPED | OEM | 14 optional OEM pins are not mapped: OEM-A-20 EVAP purge cut-off solenoid (PGS); OEM-A-9 Idle air control valve (IACV); OEM-C-10 Traction control; OEM-C-12 Traction control; OEM-C-3 A/C switch (ACS); OEM-C-4 Tachometer output (NEP); OEM-C-5 A/C pressure switch (PDSW); OEM-C-6 Traction control; OEM-C-7 Clutch switch (M/T); OEM-C-8 Traction control; OEM-C-9 Service check connector (SCS); OEM-D-5 Traction control; OEM-D-6 Fuel pump voltage monitor (VFP); OEM-D-8 Ignition timing adjuster (IGADJ) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-D-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for Honda C30A not found in the ECU's docs (EMU Black change log Honda entries = FN2 / S2000 CAM#2 / S2000 coolant gauge — no C30A/C32B/NSX) Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Not wired: - OEM-D 1: Battery backup (VBU): ECUMASTER EMU Black has no battery-constant input; not needed - OEM-A 20: EVAP purge cut-off solenoid (PGS): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A 9: Idle air control valve (IACV): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-C 4: Tachometer output (NEP): no free tacho/frequency_out/low_side/ls_hs on ECUMASTER EMU Black - OEM-C 3: A/C switch (ACS): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-C 5: A/C pressure switch (PDSW): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-C 7: Clutch switch (M/T): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-C 9: Service check connector (SCS): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-D 8: Ignition timing adjuster (IGADJ): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-C 10: Traction control: not classified in the library; wire by hand - OEM-C 12: Traction control: not classified in the library; wire by hand - OEM-C 6: Traction control: not classified in the library; wire by hand - OEM-C 8: Traction control: not classified in the library; wire by hand - OEM-D 5: Traction control: not classified in the library; wire by hand - OEM-D 6: Fuel pump voltage monitor (VFP): not classified in the library; wire by hand - EMUBLACK-Grey 18: Ignition +12V: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | AEM EMS 30-1042 (Series 1) plug-and-play install manual — 1991-94 NSX | https://fancy-craft.firebaseapp.com/NSX/report/ecu/EMS_-_30-1042.pdf | archive | 2026-10-05 | 0cad10bc64b5 |
| 4 | vendor_doc | ECUMASTER EMU Black — pinout (Black 39-pin / Grey 24-pin) | https://www.ecumaster.com/wp/wp-content/uploads/2020/05/EMU_Black_pinout.pdf | archive | 2026-10-05 | 096b2b4df1bd |
| 3 | vendor_doc | dodo-upgrades: Honda OBD1 V6 ECU pinout | https://dodo-upgrades.nl/index.php/obd1-v6-pinouts/ | archive | 2026-10-05 | f9539af28904 |