Honda NSX NA1 1991-2005 (C30A) → ECUMASTER EMU PRO 16 (auto)
Honda NSX NA1 1991-2005 (C30A) — ECUMASTER — EMU PRO 16
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-08
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 75 wires · 13 connectors · 5 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-25 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A-23 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A-24 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-B-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-A-26 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-B-10 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-B-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-B-14 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-B-16 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-D-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-D-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-D-18 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-D-19 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-D-20 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-5V1-1 | EMUPRO16-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-B-15 | EMUPRO16-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-D-4 | EMUPRO16-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-D-3 | EMUPRO16-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A-21 | EMUPRO16-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-A-22 | EMUPRO16-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-B-8 | EMUPRO16-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-B-6 | EMUPRO16-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-B-4 | EMUPRO16-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-B-3 | EMUPRO16-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A-1 | EMUPRO16-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-3 | EMUPRO16-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A-5 | EMUPRO16-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A-2 | EMUPRO16-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A-4 | EMUPRO16-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A-6 | EMUPRO16-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A-8 | EMUPRO16-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A-15 | EMUPRO16-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A-18 | EMUPRO16-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A-7 | EMUPRO16-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-5-F5 | EMUPRO16-C-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-5-F7 | EMUPRO16-C-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A-10 | EMUPRO16-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A-12 | EMUPRO16-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A-11 | EMUPRO16-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-A-13 | EMUPRO16-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-A-14 | EMUPRO16-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-A-20 | EMUPRO16-C-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A-9 | EMUPRO16-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-C-4 | EMUPRO16-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-D-17 | EMUPRO16-C-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-D-11 | EMUPRO16-C-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-D-14 | EMUPRO16-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-D-16 | EMUPRO16-C-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-D-13 | EMUPRO16-C-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-D-15 | EMUPRO16-C-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-D-12 | EMUPRO16-C-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-C-2 | EMUPRO16-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-D-9 | EMUPRO16-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-5-F2 | EMUPRO16-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-5-F4 | EMUPRO16-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-B-7 | EMUPRO16-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-C-11 | EMUPRO16-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-C-3 | EMUPRO16-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-C-5 | EMUPRO16-D-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-C-7 | EMUPRO16-D-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-C-9 | EMUPRO16-C-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-D-8 | EMUPRO16-C-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUPRO16-B-14 | EMUPRO16-A-20 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | EMUPRO16-A-11 | EMUPRO16-A-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 3 | EMUPRO16-A-11 | EMUPRO16-B-14 | open (OL) | power ground must not touch +12 V supply | |
| 4 | EMUPRO16-A-20 | EMUPRO16-A-12 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 5 | EMUPRO16-B-14 | EMUPRO16-A-12 | open (OL) | +12 V supply must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUPRO16-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 8 | — | — | — | — | — | — | — | — |
| 2 | Injector 1 | — | W38 | — | 0.5 | OEM-A-1 | — | — | — |
| 3 | Injector 2 | — | W39 | — | 0.5 | OEM-A-3 | — | — | — |
| 4 | Injector 3 | — | W40 | — | 0.5 | OEM-A-5 | — | — | — |
| 5 | Injector 4 | — | W41 | — | 0.5 | OEM-A-2 | — | — | — |
| 6 | Injector 5 | — | W42 | — | 0.5 | OEM-A-4 | — | — | — |
| 7 | Injector 6 | — | W43 | — | 0.5 | OEM-A-6 | — | — | — |
| 8 | Injector 7 | — | — | — | — | — | — | — | — |
| 9 | Injector 8 | — | — | — | — | — | — | — | — |
| 10 | Ignition 7 | — | — | — | — | — | — | — | — |
| 11 | Power GND | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | +5V source A | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
| 13 | Digital 2 | — | W65 | — | 0.5 | OEM-C-2 | — | — | — |
| 14 | Digital 4 | — | W67 | — | 0.5 | OEM-5-F2 | — | — | — |
| 15 | Digital 8 | — | W71 | — | 0.5 | OEM-C-3 | — | — | — |
| 16 | Digital 6 (turbo) | — | W69 | — | 0.5 | OEM-B-7 | — | — | — |
| 17 | Power GND | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition 6 | — | W37 | — | 0.5 | OEM-B-3 | — | — | — |
| 19 | Power GND | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Digital GND | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Digital 1 (crank) | — | W29 | — | 0.5 | OEM-B-15 | — | — | — |
| 22 | Digital 3 | — | W66 | — | 0.5 | OEM-D-9 | — | — | — |
| 23 | Digital 7 | — | W70 | — | 0.5 | OEM-C-11 | — | — | — |
| 24 | Digital 5 (turbo) | — | W68 | — | 0.5 | OEM-5-F4 | — | — | — |
| 25 | Auxiliary 9 | — | W54 | — | 0.5 | OEM-A-14 | — | — | — |
| 26 | Ignition 5 | — | W36 | — | 0.5 | OEM-B-4 | — | — | — |
| 27 | Ignition 4 | — | W35 | — | 0.5 | OEM-B-6 | — | — | — |
| 28 | Ignition 3 | — | W34 | — | 0.5 | OEM-B-8 | — | — | — |
| 29 | Ignition 2 | — | W33 | — | 0.5 | OEM-A-22 | — | — | — |
| 30 | Ignition 1 | — | W32 | — | 0.5 | OEM-A-21 | — | — | — |
| 31 | CAN 1 high (PC comm) | — | — | — | — | — | — | — | — |
| 32 | CAN 1 low (PC comm) | — | — | — | — | — | — | — | — |
| 33 | CAN 2 high | — | — | — | — | — | — | — | — |
| 34 | CAN 2 low | — | — | — | — | — | — | — | — |
EMUPRO16-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 1 (WBO heater) | — | W44 | — | 0.5 | OEM-A-8 | — | — | — |
| 2 | Auxiliary 2 (WBO heater) | — | W45 | — | 0.5 | OEM-A-15 | — | — | — |
| 3 | Auxiliary 3 (WBO heater) | — | W46 | — | 0.5 | OEM-A-18 | — | — | — |
| 4 | Auxiliary 4 (WBO heater) | — | W47 | — | 0.5 | OEM-A-7 | — | — | — |
| 5 | Auxiliary 5 | — | W50 | — | 0.5 | OEM-A-10 | — | — | — |
| 6 | Auxiliary 6 | — | W51 | — | 0.5 | OEM-A-12 | — | — | — |
| 7 | Auxiliary 7 | — | W52 | — | 0.5 | OEM-A-11 | — | — | — |
| 8 | +12V supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Digital GND (flash drive) | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | USB D- (flash drive) | — | — | — | — | — | — | — | — |
| 11 | USB D+ (flash drive) | — | — | — | — | — | — | — | — |
| 12 | +5V source A (flash drive) | — | — | — | — | — | — | — | — |
| 13 | Auxiliary 8 | — | W53 | — | 0.5 | OEM-A-13 | — | — | — |
| 14 | +12V supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 15 | +12V switched | — | — | — | — | — | — | — | — |
| 16 | Knock sensor 1 | — | W30 | — | 0.5 | OEM-D-4 | — | — | — |
| 17 | Knock sensor 2 | — | W31 | — | 0.5 | OEM-D-3 | — | — | — |
| 18 | WBO 2 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 19 | Power GND | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | WBO 1 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 21 | WBO 1 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 22 | WBO 1 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
| 23 | WBO 1 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 24 | WBO 2 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 25 | WBO 2 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 26 | WBO 2 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
EMUPRO16-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 10 | — | W55 | — | 0.5 | OEM-A-20 | — | — | — |
| 2 | Auxiliary 11 | — | W56 | — | 0.5 | OEM-A-9 | — | — | — |
| 3 | Auxiliary 12 | — | W57 | — | 0.5 | OEM-C-4 | — | — | — |
| 4 | Analog 7 | — | — | — | — | — | — | — | — |
| 5 | Analog 10 (2k2 pull) | — | — | — | — | — | — | — | — |
| 6 | H-bridge 1A | — | W49 | — | 0.5 | OEM-5-F7 | — | — | — |
| 7 | H-bridge 2B | — | — | — | — | — | — | — | — |
| 8 | H-bridge 3A | — | — | — | — | — | — | — | — |
| 9 | H-bridge 2A | — | — | — | — | — | — | — | — |
| 10 | Analog 1 (MAP) | — | W58 | — | 0.5 | OEM-D-17 | — | — | — |
| 11 | Analog 3 | — | W62 | — | 0.5 | OEM-D-13 | — | — | — |
| 12 | Analog 5 | — | W75 | — | 0.5 | OEM-D-8 | — | — | — |
| 13 | Analog 8 | — | — | — | — | — | — | — | — |
| 14 | Analog 11 (2k2 pull) | — | — | — | — | — | — | — | — |
| 15 | Analog 13 (1k pull) | — | — | — | — | — | — | — | — |
| 16 | Analog 15 (330R pull) | — | — | — | — | — | — | — | — |
| 17 | H-bridge 3B | — | — | — | — | — | — | — | — |
| 18 | Analog 2 | — | W60 | — | 0.5 | OEM-D-14 | — | — | — |
| 19 | Analog 4 | — | W64 | — | 0.5 | OEM-D-12 | — | — | — |
| 20 | Analog 6 | — | — | — | — | — | — | — | — |
| 21 | Analog 9 (2k2 pull) | — | — | — | — | — | — | — | — |
| 22 | Analog 12 (2k2 pull) | — | — | — | — | — | — | — | — |
| 23 | Analog 14 (1k pull) | — | — | — | — | — | — | — | — |
| 24 | Analog 16 (100R pull) | — | — | — | — | — | — | — | — |
| 25 | H-bridge 1B | — | W48 | — | 0.5 | OEM-5-F5 | — | — | — |
| 26 | LIN | — | — | — | — | — | — | — | — |
| 27 | +5V source B | — | — | — | — | — | — | — | — |
| 28 | +5V source B | — | — | — | — | — | — | — | — |
| 29 | Analog GND | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Power GND | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 31 | Precision analog 1 | — | W59 | — | 0.5 | OEM-D-11 | — | — | — |
| 32 | Precision analog 2 | — | W61 | — | 0.5 | OEM-D-16 | — | — | — |
| 33 | Precision analog 3 | — | W63 | — | 0.5 | OEM-D-15 | — | — | — |
| 34 | Precision analog 4 | — | W74 | — | 0.5 | OEM-C-9 | — | — | — |
EMUPRO16-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 10 | — | — | — | — | — | — | — | — |
| 2 | Injector 11 | — | — | — | — | — | — | — | — |
| 3 | Injector 12 | — | — | — | — | — | — | — | — |
| 4 | Injector 13 | — | — | — | — | — | — | — | — |
| 5 | Injector 14 | — | — | — | — | — | — | — | — |
| 6 | Injector 15 | — | — | — | — | — | — | — | — |
| 7 | Injector 16 | — | — | — | — | — | — | — | — |
| 8 | Injector 9 | — | — | — | — | — | — | — | — |
| 9 | Analog 17 | — | — | — | — | — | — | — | — |
| 10 | Analog 18 | — | — | — | — | — | — | — | — |
| 11 | Digital 9 / Analog 19 | — | W72 | — | 0.5 | OEM-C-5 | — | — | — |
| 12 | Digital 10 / Analog 20 | — | W73 | — | 0.5 | OEM-C-7 | — | — | — |
| 13 | Auxiliary 13 | — | — | — | — | — | — | — | — |
| 14 | H-bridge 4A | — | — | — | — | — | — | — | — |
| 15 | Precision analog 6 | — | — | — | — | — | — | — | — |
| 16 | Precision analog 8 | — | — | — | — | — | — | — | — |
| 17 | Analog GND | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Power GND | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Auxiliary 14 | — | — | — | — | — | — | — | — |
| 20 | H-bridge 4B | — | — | — | — | — | — | — | — |
| 21 | Precision analog 5 | — | — | — | — | — | — | — | — |
| 22 | Precision analog 7 | — | — | — | — | — | — | — | — |
| 23 | Ignition 9 | — | — | — | — | — | — | — | — |
| 24 | Ignition 10 | — | — | — | — | — | — | — | — |
| 25 | Auxiliary 16 | — | — | — | — | — | — | — | — |
| 26 | Auxiliary 15 | — | — | — | — | — | — | — | — |
OEM-5
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| F2 | Front VTEC pressure switch | — | W67 | — | 0.5 | EMUPRO16-A-14 | — | — | — |
| F4 | Rear VTEC pressure switch | — | W68 | — | 0.5 | EMUPRO16-A-24 | — | — | — |
| F5 | Front VTEC solenoid valve | — | W48 | — | 0.5 | EMUPRO16-C-25 | — | — | — |
| F7 | Rear VTEC solenoid valve | — | W49 | — | 0.5 | EMUPRO16-C-6 | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 1 | — | W38 | — | 0.5 | EMUPRO16-A-2 | — | — | — |
| 10 | Front O2 sensor heater (HTCNTF) | — | W50 | — | 0.5 | EMUPRO16-B-5 | — | — | — |
| 11 | EGR control solenoid | — | W52 | — | 0.5 | EMUPRO16-B-7 | — | — | — |
| 12 | Rear O2 sensor heater (HTCNTR) | — | W51 | — | 0.5 | EMUPRO16-B-6 | — | — | — |
| 13 | Check engine light (WARN) | — | W53 | — | 0.5 | EMUPRO16-B-13 | — | — | — |
| 14 | Chamber volume control solenoid (BPS) | — | W54 | — | 0.5 | EMUPRO16-A-25 | — | — | — |
| 15 | A/C clutch relay (ACC) | — | W45 | — | 0.5 | EMUPRO16-B-2 | — | — | — |
| 18 | Radiator fan control (FANCNTR) | — | W46 | — | 0.5 | EMUPRO16-B-3 | — | — | — |
| 2 | Injector 4 | — | W41 | — | 0.5 | EMUPRO16-A-5 | — | — | — |
| 20 | EVAP purge cut-off solenoid (PGS) | — | W55 | — | 0.5 | EMUPRO16-C-1 | — | — | — |
| 21 | Ignition coil 1 | — | W32 | — | 0.5 | EMUPRO16-A-30 | — | — | — |
| 22 | Ignition coil 2 | — | W33 | — | 0.5 | EMUPRO16-A-29 | — | — | — |
| 23 | Power ground (PG1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 24 | Power ground (PG2) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | ECU power (IGP1) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | Sensor ground (LG1) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Injector 2 | — | W39 | — | 0.5 | EMUPRO16-A-3 | — | — | — |
| 4 | Injector 5 | — | W42 | — | 0.5 | EMUPRO16-A-6 | — | — | — |
| 5 | Injector 3 | — | W40 | — | 0.5 | EMUPRO16-A-4 | — | — | — |
| 6 | Injector 6 | — | W43 | — | 0.5 | EMUPRO16-A-7 | — | — | — |
| 7 | Main relay | — | W47 | — | 0.5 | EMUPRO16-B-4 | — | — | — |
| 8 | Fuel pump relay 2 (FLR2) | — | W44 | — | 0.5 | EMUPRO16-B-1 | — | — | — |
| 9 | Idle air control valve (IACV) | — | W56 | — | 0.5 | EMUPRO16-C-2 | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | CYL 2M — CYP sensor 2 return | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 11 | CYL 1P — CYP sensor 1 signal | — | — | — | — | — | — | — | — |
| 12 | CYL 1M — CYP sensor 1 return | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | CRNK 2P — TDC sensor signal | — | — | — | — | — | — | — | — |
| 14 | CRNK 2M — TDC sensor return | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | CRNK 1P — crank sensor signal | — | W29 | — | 0.5 | EMUPRO16-A-21 | — | — | — |
| 16 | CRNK 1M — crank sensor return | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Chassis ground (LG2) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | Ignition coil 6 | — | W37 | — | 0.5 | EMUPRO16-A-18 | — | — | — |
| 4 | Ignition coil 5 | — | W36 | — | 0.5 | EMUPRO16-A-26 | — | — | — |
| 6 | Ignition coil 4 | — | W35 | — | 0.5 | EMUPRO16-A-27 | — | — | — |
| 7 | Neutral switch (M/T) / gear position (A/T) | — | W69 | — | 0.5 | EMUPRO16-A-16 | — | — | — |
| 8 | Ignition coil 3 | — | W34 | — | 0.5 | EMUPRO16-A-28 | — | — | — |
| 9 | CYL 2P — CYP sensor 2 signal | — | — | — | — | — | — | — | — |
OEM-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU power (IGP2) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 10 | Traction control | — | — | — | — | — | — | — | — |
| 11 | Starter switch (STS) | — | W70 | — | 0.5 | EMUPRO16-A-23 | — | — | — |
| 12 | Traction control | — | — | — | — | — | — | — | — |
| 2 | Vehicle speed sensor (VSS) | — | W65 | — | 0.5 | EMUPRO16-A-13 | — | — | — |
| 3 | A/C switch (ACS) | — | W71 | — | 0.5 | EMUPRO16-A-15 | — | — | — |
| 4 | Tachometer output (NEP) | — | W57 | — | 0.5 | EMUPRO16-C-3 | — | — | — |
| 5 | A/C pressure switch (PDSW) | — | W72 | — | 0.5 | EMUPRO16-D-11 | — | — | — |
| 6 | Traction control | — | — | — | — | — | — | — | — |
| 7 | Clutch switch (M/T) | — | W73 | — | 0.5 | EMUPRO16-D-12 | — | — | — |
| 8 | Traction control | — | — | — | — | — | — | — | — |
| 9 | Service check connector (SCS) | — | W74 | — | 0.5 | EMUPRO16-C-34 | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery backup (VBU) | — | — | — | — | — | — | — | — |
| 11 | Throttle position sensor (TPS) | — | W59 | — | 0.5 | EMUPRO16-C-31 | — | — | — |
| 12 | EGR lift sensor (EGRL) | — | W64 | — | 0.5 | EMUPRO16-C-19 | — | — | — |
| 13 | Engine coolant temperature (ECT) | — | W62 | — | 0.5 | EMUPRO16-C-11 | — | — | — |
| 14 | Primary O2 sensor | — | W60 | — | 0.5 | EMUPRO16-C-18 | — | — | — |
| 15 | Intake air temperature (IAT) | — | W63 | — | 0.5 | EMUPRO16-C-33 | — | — | — |
| 16 | Secondary O2 sensor | — | W61 | — | 0.5 | EMUPRO16-C-32 | — | — | — |
| 17 | MAP sensor | — | W58 | — | 0.5 | EMUPRO16-C-10 | — | — | — |
| 18 | +5V sensor supply (VCC) | — | W25 | — | 0.5 | SP-5V1-1 | — | — | — |
| 19 | +5V sensor supply (VCC) | — | W26 | — | 0.5 | SP-5V1-1 | — | — | — |
| 20 | +5V sensor supply (VCC) | — | W27 | — | 0.5 | SP-5V1-1 | — | — | — |
| 21 | Sensor ground (SG) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Sensor ground (SG) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Knock sensor — rear | — | W31 | — | 0.5 | EMUPRO16-B-17 | — | — | — |
| 4 | Knock sensor — front | — | W30 | — | 0.5 | EMUPRO16-B-16 | — | — | — |
| 5 | Traction control | — | — | — | — | — | — | — | — |
| 6 | Fuel pump voltage monitor (VFP) | — | — | — | — | — | — | — | — |
| 8 | Ignition timing adjuster (IGADJ) | — | W75 | — | 0.5 | EMUPRO16-C-12 | — | — | — |
| 9 | Alternator FR signal | — | W66 | — | 0.5 | EMUPRO16-A-22 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-A-26 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-B-10 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-B-12 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-B-14 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-B-16 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-D-21 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-D-22 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | EMUPRO16-A-20 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | EMUPRO16-B-9 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | EMUPRO16-C-29 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | EMUPRO16-D-17 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-25 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C-1 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | EMUPRO16-B-14 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | EMUPRO16-B-8 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W25 | — | 0.5 | OEM-D-18 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | OEM-D-19 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | OEM-D-20 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | EMUPRO16-A-12 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-A-23 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A-24 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-B-2 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | EMUPRO16-A-11 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | EMUPRO16-A-17 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | EMUPRO16-A-19 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | EMUPRO16-B-19 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | EMUPRO16-C-30 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | EMUPRO16-D-18 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-5-F2 | Front VTEC pressure switch | digital_in | EMUPRO16-A-14 | Digital 4 | digital_in | single_source | |
| OEM-5-F4 | Rear VTEC pressure switch | digital_in | EMUPRO16-A-24 | Digital 5 (turbo) | digital_in | single_source | |
| OEM-5-F5 | Front VTEC solenoid valve | high_side_out | EMUPRO16-C-25 | H-bridge 1B | hbridge_out | single_source | |
| OEM-5-F7 | Rear VTEC solenoid valve | high_side_out | EMUPRO16-C-6 | H-bridge 1A | hbridge_out | single_source | |
| OEM-A-1 | Injector 1 | injector_out | EMUPRO16-A-2 | Injector 1 | injector_out | single_source | |
| OEM-A-10 | Front O2 sensor heater (HTCNTF) | low_side_out | EMUPRO16-B-5 | Auxiliary 5 | low_side_out | single_source | |
| OEM-A-11 | EGR control solenoid | low_side_out | EMUPRO16-B-7 | Auxiliary 7 | low_side_out | single_source | |
| OEM-A-12 | Rear O2 sensor heater (HTCNTR) | low_side_out | EMUPRO16-B-6 | Auxiliary 6 | low_side_out | single_source | |
| OEM-A-13 | Check engine light (WARN) | low_side_out | EMUPRO16-B-13 | Auxiliary 8 | low_side_out | single_source | |
| OEM-A-14 | Chamber volume control solenoid (BPS) | low_side_out | EMUPRO16-A-25 | Auxiliary 9 | low_side_out | single_source | |
| OEM-A-15 | A/C clutch relay (ACC) | low_side_out | EMUPRO16-B-2 | Auxiliary 2 (WBO heater) | low_side_out | single_source | |
| OEM-A-18 | Radiator fan control (FANCNTR) | low_side_out | EMUPRO16-B-3 | Auxiliary 3 (WBO heater) | low_side_out | single_source | |
| OEM-A-2 | Injector 4 | injector_out | EMUPRO16-A-5 | Injector 4 | injector_out | single_source | |
| OEM-A-20 | EVAP purge cut-off solenoid (PGS) | low_side_out | EMUPRO16-C-1 | Auxiliary 10 | low_side_out | single_source | |
| OEM-A-21 | Ignition coil 1 | ignition_out | EMUPRO16-A-30 | Ignition 1 | ignition_out | single_source | |
| OEM-A-22 | Ignition coil 2 | ignition_out | EMUPRO16-A-29 | Ignition 2 | ignition_out | single_source | |
| OEM-A-23 | Power ground (PG1) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A-24 | Power ground (PG2) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A-25 | ECU power (IGP1) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-A-26 | Sensor ground (LG1) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-A-3 | Injector 2 | injector_out | EMUPRO16-A-3 | Injector 2 | injector_out | single_source | |
| OEM-A-4 | Injector 5 | injector_out | EMUPRO16-A-6 | Injector 5 | injector_out | corroborated | |
| OEM-A-5 | Injector 3 | injector_out | EMUPRO16-A-4 | Injector 3 | injector_out | single_source | |
| OEM-A-6 | Injector 6 | injector_out | EMUPRO16-A-7 | Injector 6 | injector_out | single_source | |
| OEM-A-7 | Main relay | low_side_out | EMUPRO16-B-4 | Auxiliary 4 (WBO heater) | low_side_out | single_source | |
| OEM-A-8 | Fuel pump relay 2 (FLR2) | low_side_out | EMUPRO16-B-1 | Auxiliary 1 (WBO heater) | low_side_out | single_source | |
| OEM-A-9 | Idle air control valve (IACV) | low_side_out | EMUPRO16-C-2 | Auxiliary 11 | low_side_out | single_source | |
| OEM-B-10 | CYL 2M — CYP sensor 2 return | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-11 | CYL 1P — CYP sensor 1 signal | trigger_in | — | — | — | single_source | |
| OEM-B-12 | CYL 1M — CYP sensor 1 return | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-13 | CRNK 2P — TDC sensor signal | trigger_in | — | — | — | single_source | |
| OEM-B-14 | CRNK 2M — TDC sensor return | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-15 | CRNK 1P — crank sensor signal | trigger_in | EMUPRO16-A-21 | Digital 1 (crank) | trigger_in | single_source | |
| OEM-B-16 | CRNK 1M — crank sensor return | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-2 | Chassis ground (LG2) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-B-3 | Ignition coil 6 | ignition_out | EMUPRO16-A-18 | Ignition 6 | ignition_out | single_source | |
| OEM-B-4 | Ignition coil 5 | ignition_out | EMUPRO16-A-26 | Ignition 5 | ignition_out | single_source | |
| OEM-B-6 | Ignition coil 4 | ignition_out | EMUPRO16-A-27 | Ignition 4 | ignition_out | single_source | |
| OEM-B-7 | Neutral switch (M/T) / gear position (A/T) | digital_in | EMUPRO16-A-16 | Digital 6 (turbo) | digital_in | single_source | |
| OEM-B-8 | Ignition coil 3 | ignition_out | EMUPRO16-A-28 | Ignition 3 | ignition_out | single_source | |
| OEM-B-9 | CYL 2P — CYP sensor 2 signal | trigger_in | — | — | — | single_source | |
| OEM-C-1 | ECU power (IGP2) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-C-10 | Traction control | — | — | — | — | single_source | |
| OEM-C-11 | Starter switch (STS) | digital_in | EMUPRO16-A-23 | Digital 7 | digital_in | single_source | |
| OEM-C-12 | Traction control | — | — | — | — | single_source | |
| OEM-C-2 | Vehicle speed sensor (VSS) | digital_in | EMUPRO16-A-13 | Digital 2 | digital_in | single_source | |
| OEM-C-3 | A/C switch (ACS) | digital_in | EMUPRO16-A-15 | Digital 8 | digital_in | single_source | |
| OEM-C-4 | Tachometer output (NEP) | tacho_out | EMUPRO16-C-3 | Auxiliary 12 | low_side_out | single_source | |
| OEM-C-5 | A/C pressure switch (PDSW) | digital_in | EMUPRO16-D-11 | Digital 9 / Analog 19 | digital_in | single_source | |
| OEM-C-6 | Traction control | — | — | — | — | single_source | |
| OEM-C-7 | Clutch switch (M/T) | digital_in | EMUPRO16-D-12 | Digital 10 / Analog 20 | digital_in | single_source | |
| OEM-C-8 | Traction control | — | — | — | — | single_source | |
| OEM-C-9 | Service check connector (SCS) | digital_in | EMUPRO16-C-34 | Precision analog 4 | analog_in | single_source | |
| OEM-D-1 | Battery backup (VBU) | power_in | — | — | — | single_source | |
| OEM-D-11 | Throttle position sensor (TPS) | analog_in | EMUPRO16-C-31 | Precision analog 1 | analog_in | single_source | |
| OEM-D-12 | EGR lift sensor (EGRL) | analog_in | EMUPRO16-C-19 | Analog 4 | analog_in | single_source | |
| OEM-D-13 | Engine coolant temperature (ECT) | temp_in | EMUPRO16-C-11 | Analog 3 | analog_in | single_source | |
| OEM-D-14 | Primary O2 sensor | lambda_nb_in | EMUPRO16-C-18 | Analog 2 | analog_in | single_source | |
| OEM-D-15 | Intake air temperature (IAT) | temp_in | EMUPRO16-C-33 | Precision analog 3 | analog_in | single_source | |
| OEM-D-16 | Secondary O2 sensor | lambda_nb_in | EMUPRO16-C-32 | Precision analog 2 | analog_in | single_source | |
| OEM-D-17 | MAP sensor | analog_in | EMUPRO16-C-10 | Analog 1 (MAP) | analog_in | single_source | |
| OEM-D-18 | +5V sensor supply (VCC) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-D-19 | +5V sensor supply (VCC) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-D-20 | +5V sensor supply (VCC) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-D-21 | Sensor ground (SG) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-D-22 | Sensor ground (SG) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-D-3 | Knock sensor — rear | knock_in | EMUPRO16-B-17 | Knock sensor 2 | knock_in | single_source | |
| OEM-D-4 | Knock sensor — front | knock_in | EMUPRO16-B-16 | Knock sensor 1 | knock_in | single_source | |
| OEM-D-5 | Traction control | — | — | — | — | single_source | |
| OEM-D-6 | Fuel pump voltage monitor (VFP) | — | — | — | — | corroborated | |
| OEM-D-8 | Ignition timing adjuster (IGADJ) | digital_in | EMUPRO16-C-12 | Analog 5 | analog_in | single_source | |
| OEM-D-9 | Alternator FR signal | digital_in | EMUPRO16-A-22 | Digital 3 | digital_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-25 | SP-14V-1 | 0.85 | no route | ECU power (IGP1) | — | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | no route | ECU power (IGP2) | — | |
| W3 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | no route | +12V supply | — | |
| W4 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | no route | +12V supply | — | |
| W5 | OEM-A-23 | SP-GND-1 | 0.85 | no route | Power ground (PG1) | — | |
| W6 | OEM-A-24 | SP-GND-1 | 0.85 | no route | Power ground (PG2) | — | |
| W7 | OEM-B-2 | SP-GND-1 | 0.85 | no route | Chassis ground (LG2) | — | |
| W8 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | no route | Power GND | — | |
| W9 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | no route | Power GND | — | |
| W10 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | no route | Power GND | — | |
| W11 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | no route | Power GND | — | |
| W12 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | no route | Power GND | — | |
| W13 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | no route | Power GND | — | |
| W14 | OEM-A-26 | SP-0V-1 | 0.5 | no route | Sensor ground (LG1) | — | |
| W15 | OEM-B-10 | SP-0V-1 | 0.5 | no route | CYL 2M — CYP sensor 2 return | — | |
| W16 | OEM-B-12 | SP-0V-1 | 0.5 | no route | CYL 1M — CYP sensor 1 return | — | |
| W17 | OEM-B-14 | SP-0V-1 | 0.5 | no route | CRNK 2M — TDC sensor return | — | |
| W18 | OEM-B-16 | SP-0V-1 | 0.5 | no route | CRNK 1M — crank sensor return | — | |
| W19 | OEM-D-21 | SP-0V-1 | 0.5 | no route | Sensor ground (SG) | — | |
| W20 | OEM-D-22 | SP-0V-1 | 0.5 | no route | Sensor ground (SG) | — | |
| W21 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | no route | Digital GND | — | |
| W22 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | no route | Digital GND (flash drive) | — | |
| W23 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | no route | Analog GND | — | |
| W24 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | no route | Analog GND | — | |
| W25 | OEM-D-18 | SP-5V1-1 | 0.5 | no route | +5V sensor supply (VCC) | — | |
| W26 | OEM-D-19 | SP-5V1-1 | 0.5 | no route | +5V sensor supply (VCC) | — | |
| W27 | OEM-D-20 | SP-5V1-1 | 0.5 | no route | +5V sensor supply (VCC) | — | |
| W28 | SP-5V1-1 | EMUPRO16-A-12 | 0.5 | no route | +5V source A | — | |
| W29 | OEM-B-15 | EMUPRO16-A-21 | 0.5 | no route | CRNK 1P — crank sensor signal | — | |
| W30 | OEM-D-4 | EMUPRO16-B-16 | 0.5 | no route | Knock sensor — front | — | |
| W31 | OEM-D-3 | EMUPRO16-B-17 | 0.5 | no route | Knock sensor — rear | — | |
| W32 | OEM-A-21 | EMUPRO16-A-30 | 0.5 | no route | Ignition coil 1 | — | |
| W33 | OEM-A-22 | EMUPRO16-A-29 | 0.5 | no route | Ignition coil 2 | — | |
| W34 | OEM-B-8 | EMUPRO16-A-28 | 0.5 | no route | Ignition coil 3 | — | |
| W35 | OEM-B-6 | EMUPRO16-A-27 | 0.5 | no route | Ignition coil 4 | — | |
| W36 | OEM-B-4 | EMUPRO16-A-26 | 0.5 | no route | Ignition coil 5 | — | |
| W37 | OEM-B-3 | EMUPRO16-A-18 | 0.5 | no route | Ignition coil 6 | — | |
| W38 | OEM-A-1 | EMUPRO16-A-2 | 0.5 | no route | Injector 1 | — | |
| W39 | OEM-A-3 | EMUPRO16-A-3 | 0.5 | no route | Injector 2 | — | |
| W40 | OEM-A-5 | EMUPRO16-A-4 | 0.5 | no route | Injector 3 | — | |
| W41 | OEM-A-2 | EMUPRO16-A-5 | 0.5 | no route | Injector 4 | — | |
| W42 | OEM-A-4 | EMUPRO16-A-6 | 0.5 | no route | Injector 5 | — | |
| W43 | OEM-A-6 | EMUPRO16-A-7 | 0.5 | no route | Injector 6 | — | |
| W44 | OEM-A-8 | EMUPRO16-B-1 | 0.5 | no route | Fuel pump relay 2 (FLR2) | — | |
| W45 | OEM-A-15 | EMUPRO16-B-2 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W46 | OEM-A-18 | EMUPRO16-B-3 | 0.5 | no route | Radiator fan control (FANCNTR) | — | |
| W47 | OEM-A-7 | EMUPRO16-B-4 | 0.5 | no route | Main relay | — | |
| W48 | OEM-5-F5 | EMUPRO16-C-25 | 0.5 | no route | Front VTEC solenoid valve | — | |
| W49 | OEM-5-F7 | EMUPRO16-C-6 | 0.5 | no route | Rear VTEC solenoid valve | — | |
| W50 | OEM-A-10 | EMUPRO16-B-5 | 0.5 | no route | Front O2 sensor heater (HTCNTF) | — | |
| W51 | OEM-A-12 | EMUPRO16-B-6 | 0.5 | no route | Rear O2 sensor heater (HTCNTR) | — | |
| W52 | OEM-A-11 | EMUPRO16-B-7 | 0.5 | no route | EGR control solenoid | — | |
| W53 | OEM-A-13 | EMUPRO16-B-13 | 0.5 | no route | Check engine light (WARN) | — | |
| W54 | OEM-A-14 | EMUPRO16-A-25 | 0.5 | no route | Chamber volume control solenoid (BPS) | — | |
| W55 | OEM-A-20 | EMUPRO16-C-1 | 0.5 | no route | EVAP purge cut-off solenoid (PGS) | — | |
| W56 | OEM-A-9 | EMUPRO16-C-2 | 0.5 | no route | Idle air control valve (IACV) | — | |
| W57 | OEM-C-4 | EMUPRO16-C-3 | 0.5 | no route | Tachometer output (NEP) | — | |
| W58 | OEM-D-17 | EMUPRO16-C-10 | 0.5 | no route | MAP sensor | — | |
| W59 | OEM-D-11 | EMUPRO16-C-31 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W60 | OEM-D-14 | EMUPRO16-C-18 | 0.5 | no route | Primary O2 sensor | — | |
| W61 | OEM-D-16 | EMUPRO16-C-32 | 0.5 | no route | Secondary O2 sensor | — | |
| W62 | OEM-D-13 | EMUPRO16-C-11 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W63 | OEM-D-15 | EMUPRO16-C-33 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W64 | OEM-D-12 | EMUPRO16-C-19 | 0.5 | no route | EGR lift sensor (EGRL) | — | |
| W65 | OEM-C-2 | EMUPRO16-A-13 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W66 | OEM-D-9 | EMUPRO16-A-22 | 0.5 | no route | Alternator FR signal | — | |
| W67 | OEM-5-F2 | EMUPRO16-A-14 | 0.5 | no route | Front VTEC pressure switch | — | |
| W68 | OEM-5-F4 | EMUPRO16-A-24 | 0.5 | no route | Rear VTEC pressure switch | — | |
| W69 | OEM-B-7 | EMUPRO16-A-16 | 0.5 | no route | Neutral switch (M/T) / gear position (A/T) | — | |
| W70 | OEM-C-11 | EMUPRO16-A-23 | 0.5 | no route | Starter switch (STS) | — | |
| W71 | OEM-C-3 | EMUPRO16-A-15 | 0.5 | no route | A/C switch (ACS) | — | |
| W72 | OEM-C-5 | EMUPRO16-D-11 | 0.5 | no route | A/C pressure switch (PDSW) | — | |
| W73 | OEM-C-7 | EMUPRO16-D-12 | 0.5 | no route | Clutch switch (M/T) | — | |
| W74 | OEM-C-9 | EMUPRO16-C-34 | 0.5 | no route | Service check connector (SCS) | — | |
| W75 | OEM-D-8 | EMUPRO16-C-12 | 0.5 | no route | Ignition timing adjuster (IGADJ) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 1473416-1 | TE | Superseal 1.0 26-way plug, Key 3 | 1.000 | ea |
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 60.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (9)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-B-11 | Required OEM function "CYL 1P — CYP sensor 1 signal" (trigger_in) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-5-F5 ↔ EMUPRO16-C-25 | OEM-5-F5 "Front VTEC solenoid valve" [high_side_out] is wired to EMUPRO16-C-25 "H-bridge 1B" [hbridge_out]. A half-bridge can act as a high-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-5-F7 ↔ EMUPRO16-C-6 | OEM-5-F7 "Rear VTEC solenoid valve" [high_side_out] is wired to EMUPRO16-C-6 "H-bridge 1A" [hbridge_out]. A half-bridge can act as a high-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-C-9 ↔ EMUPRO16-C-34 | OEM-C-9 "Service check connector (SCS)" [digital_in] is wired to EMUPRO16-C-34 "Precision analog 4" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-D-8 ↔ EMUPRO16-C-12 | OEM-D-8 "Ignition timing adjuster (IGADJ)" [digital_in] is wired to EMUPRO16-C-12 "Analog 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-C-4 ↔ EMUPRO16-C-3 | OEM-C-4 "Tachometer output (NEP)" [tacho_out] is wired to EMUPRO16-C-3 "Auxiliary 12" [low_side_out]. Tacho as a low-side output: check the tach needs a pull-up. |
| info | NET_FAMILY | OEM-D-13 ↔ EMUPRO16-C-11 | OEM-D-13 "Engine coolant temperature (ECT)" [temp_in] is wired to EMUPRO16-C-11 "Analog 3" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-D-15 ↔ EMUPRO16-C-33 | OEM-D-15 "Intake air temperature (IAT)" [temp_in] is wired to EMUPRO16-C-33 "Precision analog 3" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-B-13 CRNK 2P — TDC sensor signal; OEM-B-9 CYL 2P — CYP sensor 2 signal; OEM-C-10 Traction control; OEM-C-12 Traction control; OEM-C-6 Traction control; OEM-C-8 Traction control; OEM-D-5 Traction control; OEM-D-6 Fuel pump voltage monitor (VFP) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-D-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for Honda C30A not found in the ECU's docs (EMU Black change log Honda entries = FN2 / S2000 CAM#2 / S2000 coolant gauge — no C30A/C32B/NSX) Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Open items: - OEM-B 11: CYL 1P — CYP sensor 1 signal: no free cam_vr/cam_hall/frequency_in input on ECUMASTER EMU PRO 16 Not wired: - OEM-D 1: Battery backup (VBU): ECUMASTER EMU PRO 16 has no battery-constant input; not needed - OEM-B 13: CRNK 2P — TDC sensor signal: no free crank_vr/frequency_in input on ECUMASTER EMU PRO 16 - OEM-B 9: CYL 2P — CYP sensor 2 signal: no free cam_vr/cam_hall/frequency_in input on ECUMASTER EMU PRO 16 - OEM-C 10: Traction control: not classified in the library; wire by hand - OEM-C 12: Traction control: not classified in the library; wire by hand - OEM-C 6: Traction control: not classified in the library; wire by hand - OEM-C 8: Traction control: not classified in the library; wire by hand - OEM-D 5: Traction control: not classified in the library; wire by hand - OEM-D 6: Fuel pump voltage monitor (VFP): not classified in the library; wire by hand - EMUPRO16-B 15: +12V switched: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | AEM EMS 30-1042 (Series 1) plug-and-play install manual — 1991-94 NSX | https://fancy-craft.firebaseapp.com/NSX/report/ecu/EMS_-_30-1042.pdf | archive | 2026-10-05 | 0cad10bc64b5 |
| 4 | vendor_doc | ECUMASTER EMU PRO 16 — pinout (Connectors A/B/C/D) | https://www.ecumaster.com/files/EMU_PRO/EMU_PRO_16_Pinout_v1.0.pdf | archive | 2026-10-05 | 72799bed63fb |
| 3 | vendor_doc | dodo-upgrades: Honda OBD1 V6 ECU pinout | https://dodo-upgrades.nl/index.php/obd1-v6-pinouts/ | archive | 2026-10-05 | f9539af28904 |