MX-5 Miata NB1 1999-00 (BP-4W) → Haltech Elite 2500 HT-151300 (auto)
MX-5 Miata NB1 1999-00 (BP-4W) — Haltech — Elite 2500
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-08
Before you start
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 55 wires · 8 connectors · 3 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-1-B | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-3-M | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | ELITE2500-A-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | ELITE2500-B-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-3-A | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-3-B | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-3-C | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | ELITE2500-A-10 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | ELITE2500-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-3-F | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-0V-1 | ELITE2500-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-0V-1 | ELITE2500-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-0V-1 | ELITE2500-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-2-I | ELITE2500-A-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-2-J | ELITE2500-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | ELITE2500-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-2-H | ELITE2500-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | ELITE2500-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-2-F | ELITE2500-B-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-3-G | ELITE2500-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-3-H | ELITE2500-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-3-W | ELITE2500-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-3-X | ELITE2500-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-3-Y | ELITE2500-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-3-Z | ELITE2500-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-1-I | ELITE2500-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-1-R | ELITE2500-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-1-S | ELITE2500-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-3-N | ELITE2500-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-1-U | ELITE2500-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-3-V | ELITE2500-B-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-3-O | ELITE2500-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-1-E | ELITE2500-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-1-O | ELITE2500-A-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-1-Q | ELITE2500-A-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-2-M | ELITE2500-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-2-N | ELITE2500-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-2-O | ELITE2500-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-2-P | ELITE2500-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-3-L | ELITE2500-B-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-3-Q | ELITE2500-B-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-2-L | ELITE2500-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-3-E | ELITE2500-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-2-C | ELITE2500-A-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-3-J | ELITE2500-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-2-E | ELITE2500-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-2-B | ELITE2500-B-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-2-A | ELITE2500-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-3-K | ELITE2500-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-3-S | ELITE2500-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-2-D | ELITE2500-B-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-1-F | ELITE2500-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-1-G | ELITE2500-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-1-P | ELITE2500-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-1-V | ELITE2500-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | ELITE2500-A-26 | ELITE2500-A-10 | open (OL) | +12 V supply must not touch power ground | |
| 2 | ELITE2500-A-26 | ELITE2500-B-14 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | ELITE2500-A-9 | ELITE2500-A-10 | open (OL) | 5 V sensor reference must not touch power ground | |
| 4 | ELITE2500-A-9 | ELITE2500-B-14 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 5 | ELITE2500-A-26 | ELITE2500-A-9 | open (OL) | +12 V supply must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
ELITE2500-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | DPO 2 | — | W28 | — | 0.5 | OEM-1-S | — | — | — |
| 10 | Battery ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | Battery ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | +8V DC | — | — | — | — | — | — | — | — |
| 13 | 12V ignition input | — | — | — | — | — | — | — | — |
| 14 | AVI 10 (TPS) | — | W55 | — | 0.5 | OEM-1-V | — | — | — |
| 15 | AVI 9 (MAP) | — | W50 | — | 0.5 | OEM-3-S | — | — | — |
| 16 | AVI 2 | — | W43 | — | 0.5 | OEM-3-E | — | — | — |
| 17 | AVI 3 | — | W44 | — | 0.5 | OEM-2-C | — | — | — |
| 18 | DPO 1 | — | W27 | — | 0.5 | OEM-1-R | — | — | — |
| 19 | INJ 1 | — | W22 | — | 0.5 | OEM-3-W | — | — | — |
| 2 | AVI 4 | — | W45 | — | 0.5 | OEM-3-J | — | — | — |
| 20 | INJ 2 | — | W23 | — | 0.5 | OEM-3-X | — | — | — |
| 21 | INJ 3 | — | W24 | — | 0.5 | OEM-3-Y | — | — | — |
| 22 | INJ 4 | — | W25 | — | 0.5 | OEM-3-Z | — | — | — |
| 23 | DPO 3 | — | W30 | — | 0.5 | OEM-1-U | — | — | — |
| 24 | DPO 5 (fuel pump trigger) | — | W29 | — | 0.5 | OEM-3-N | — | — | — |
| 25 | DPO 6 (ECR OUT) | — | W26 | — | 0.5 | OEM-1-I | — | — | — |
| 26 | ECU injector power input | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | INJ 5 | — | W36 | — | 0.5 | OEM-2-M | — | — | — |
| 28 | INJ 6 | — | W37 | — | 0.5 | OEM-2-N | — | — | — |
| 29 | INJ 7 | — | W38 | — | 0.5 | OEM-2-O | — | — | — |
| 3 | IGN 1 | — | W20 | — | 0.5 | OEM-3-G | — | — | — |
| 30 | INJ 8 | — | W39 | — | 0.5 | OEM-2-P | — | — | — |
| 31 | Stepper 1 P1 / DPO | — | W32 | — | 0.5 | OEM-3-O | — | — | — |
| 32 | Stepper 1 P2 / DPO | — | W33 | — | 0.5 | OEM-1-E | — | — | — |
| 33 | Stepper 1 P3 / DPO | — | W34 | — | 0.5 | OEM-1-O | — | — | — |
| 34 | Stepper 1 P4 / DPO | — | W35 | — | 0.5 | OEM-1-Q | — | — | — |
| 4 | IGN 2 | — | W21 | — | 0.5 | OEM-3-H | — | — | — |
| 5 | IGN 3 | — | — | — | — | — | — | — | — |
| 6 | IGN 4 | — | — | — | — | — | — | — | — |
| 7 | IGN 5 | — | — | — | — | — | — | — | — |
| 8 | IGN 6 | — | — | — | — | — | — | — | — |
| 9 | +5V DC | — | W14 | — | 0.5 | OEM-2-I | — | — | — |
ELITE2500-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Crank (Trigger) (+) | — | W15 | — | 0.5 | OEM-2-J | — | — | — |
| 10 | SPI 3 | — | W53 | — | 0.5 | OEM-1-G | — | — | — |
| 11 | +13.8V ECU supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 12 | AVI 6 (O2 Input 1) | — | W48 | — | 0.5 | OEM-2-A | — | — | — |
| 13 | AVI 1 (O2 Input 2) | — | W42 | — | 0.5 | OEM-2-L | — | — | — |
| 14 | Signal ground | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Signal ground | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Signal ground | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | IGN 7 | — | — | — | — | — | — | — | — |
| 18 | IGN 8 | — | — | — | — | — | — | — | — |
| 19 | DPO 4 | — | W31 | — | 0.5 | OEM-3-V | — | — | — |
| 2 | Cam (Home) (+) | — | W17 | — | 0.5 | OEM-2-H | — | — | — |
| 20 | AVI 5 | — | W47 | — | 0.5 | OEM-2-B | — | — | — |
| 21 | KNOCK 1 | — | W19 | — | 0.5 | OEM-2-F | — | — | — |
| 22 | KNOCK 2 | — | — | — | — | — | — | — | — |
| 23 | CAN H | — | — | — | — | — | — | — | — |
| 24 | CAN L | — | — | — | — | — | — | — | — |
| 25 | DBW 1 / DPO | — | W40 | — | 0.5 | OEM-3-L | — | — | — |
| 26 | DBW 2 / DPO | — | W41 | — | 0.5 | OEM-3-Q | — | — | — |
| 3 | AVI 7 (Air Temp) | — | W49 | — | 0.5 | OEM-3-K | — | — | — |
| 4 | AVI 8 (Coolant Temp) | — | W46 | — | 0.5 | OEM-2-E | — | — | — |
| 5 | Crank (Trigger) (−) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Cam (Home) (−) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | SPI 4 | — | W54 | — | 0.5 | OEM-1-P | — | — | — |
| 8 | SPI 1 | — | W51 | — | 0.5 | OEM-2-D | — | — | — |
| 9 | SPI 2 | — | W52 | — | 0.5 | OEM-1-F | — | — | — |
OEM-1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Constant +12V | — | — | — | — | — | — | — | — |
| B | ECU power +14V (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| E | Malfunction indicator lamp (MIL) | — | W33 | — | 0.5 | ELITE2500-A-32 | — | — | — |
| F | Brake switch | — | W52 | — | 0.5 | ELITE2500-B-9 | — | — | — |
| G | Power steering pressure switch | — | W53 | — | 0.5 | ELITE2500-B-10 | — | — | — |
| I | Condenser fan relay | — | W26 | — | 0.5 | ELITE2500-A-25 | — | — | — |
| O | Alternator control | — | W34 | — | 0.5 | ELITE2500-A-33 | — | — | — |
| P | A/C request | — | W54 | — | 0.5 | ELITE2500-B-7 | — | — | — |
| Q | Charge lamp | — | W35 | — | 0.5 | ELITE2500-A-34 | — | — | — |
| R | Cooling fan relay | — | W27 | — | 0.5 | ELITE2500-A-18 | — | — | — |
| S | A/C clutch relay | — | W28 | — | 0.5 | ELITE2500-A-1 | — | — | — |
| U | Front O2 heater | — | W30 | — | 0.5 | ELITE2500-A-23 | — | — | — |
| V | Neutral switch | — | W55 | — | 0.5 | ELITE2500-A-14 | — | — | — |
OEM-2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Fuel tank pressure | — | W48 | — | 0.5 | ELITE2500-B-12 | — | — | — |
| B | Intake air temperature (IAT) | — | W47 | — | 0.5 | ELITE2500-B-20 | — | — | — |
| C | Front O2 signal | — | W44 | — | 0.5 | ELITE2500-A-17 | — | — | — |
| D | Vehicle speed | — | W51 | — | 0.5 | ELITE2500-B-8 | — | — | — |
| E | Coolant temperature (ECT) | — | W46 | — | 0.5 | ELITE2500-B-4 | — | — | — |
| F | Knock sensor | — | W19 | — | 0.5 | ELITE2500-B-21 | — | — | — |
| H | Cam position (CMP) | — | W17 | — | 0.5 | ELITE2500-B-2 | — | — | — |
| I | +5V sensor supply | — | W14 | — | 0.5 | ELITE2500-A-9 | — | — | — |
| J | Crank position (CKP) | — | W15 | — | 0.5 | ELITE2500-B-1 | — | — | — |
| K | Tachometer output | — | — | — | — | — | — | — | — |
| L | Mass air flow (MAF) | — | W42 | — | 0.5 | ELITE2500-B-13 | — | — | — |
| M | EGR valve | — | W36 | — | 0.5 | ELITE2500-A-27 | — | — | — |
| N | EGR valve | — | W37 | — | 0.5 | ELITE2500-A-28 | — | — | — |
| O | EGR valve | — | W38 | — | 0.5 | ELITE2500-A-29 | — | — | — |
| P | EGR valve | — | W39 | — | 0.5 | ELITE2500-A-30 | — | — | — |
OEM-3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| B | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| C | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| E | Throttle position (TPS) | — | W43 | — | 0.5 | ELITE2500-A-16 | — | — | — |
| F | Signal ground | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| G | Ignition 1 (coils 1+4, wasted spark) | — | W20 | — | 0.5 | ELITE2500-A-3 | — | — | — |
| H | Ignition 2 (coils 2+3, wasted spark) | — | W21 | — | 0.5 | ELITE2500-A-4 | — | — | — |
| I | Clutch switch | — | — | — | — | — | — | — | — |
| J | Rear O2 signal | — | W45 | — | 0.5 | ELITE2500-A-2 | — | — | — |
| K | Fuel level | — | W49 | — | 0.5 | ELITE2500-B-3 | — | — | — |
| L | Evap purge solenoid | — | W40 | — | 0.5 | ELITE2500-B-25 | — | — | — |
| M | ISC valve +14V feed | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| N | Fuel pump relay | — | W29 | — | 0.5 | ELITE2500-A-24 | — | — | — |
| O | ISC valve low side | — | W32 | — | 0.5 | ELITE2500-A-31 | — | — | — |
| Q | VICS solenoid (intake butterflies) | — | W41 | — | 0.5 | ELITE2500-B-26 | — | — | — |
| S | EGR boost sensor | — | W50 | — | 0.5 | ELITE2500-A-15 | — | — | — |
| T | EGR boost solenoid | — | — | — | — | — | — | — | — |
| U | Canister drain cut valve (CDCV) | — | — | — | — | — | — | — | — |
| V | Rear O2 heater | — | W31 | — | 0.5 | ELITE2500-B-19 | — | — | — |
| W | Injector 1 | — | W22 | — | 0.5 | ELITE2500-A-19 | — | — | — |
| X | Injector 2 | — | W23 | — | 0.5 | ELITE2500-A-20 | — | — | — |
| Y | Injector 3 | — | W24 | — | 0.5 | ELITE2500-A-21 | — | — | — |
| Z | Injector 4 | — | W25 | — | 0.5 | ELITE2500-A-22 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.5 | OEM-3-F | — | — | — |
| 1 | — | — | W11 | — | 0.5 | ELITE2500-B-14 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | ELITE2500-B-15 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | ELITE2500-B-16 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | ELITE2500-B-5 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | ELITE2500-B-6 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-1-B | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-3-M | — | — | — |
| 1 | — | — | W3 | — | 0.85 | ELITE2500-A-26 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | ELITE2500-B-11 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-3-A | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-3-B | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-3-C | — | — | — |
| 1 | — | — | W8 | — | 0.85 | ELITE2500-A-10 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | ELITE2500-A-11 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-1-A | Constant +12V | power_in | — | — | — | single_source | |
| OEM-1-B | ECU power +14V (main relay) | power_in | ELITE2500-A-26 + ELITE2500-B-11 | ECU injector power input + +13.8V ECU supply | power_in | single_source | |
| OEM-1-E | Malfunction indicator lamp (MIL) | low_side_out | ELITE2500-A-32 | Stepper 1 P2 / DPO | switch_out | single_source | |
| OEM-1-F | Brake switch | digital_in | ELITE2500-B-9 | SPI 2 | digital_in | single_source | |
| OEM-1-G | Power steering pressure switch | digital_in | ELITE2500-B-10 | SPI 3 | digital_in | single_source | |
| OEM-1-I | Condenser fan relay | low_side_out | ELITE2500-A-25 | DPO 6 (ECR OUT) | low_side_out | single_source | |
| OEM-1-O | Alternator control | low_side_out | ELITE2500-A-33 | Stepper 1 P3 / DPO | switch_out | single_source | |
| OEM-1-P | A/C request | digital_in | ELITE2500-B-7 | SPI 4 | digital_in | single_source | |
| OEM-1-Q | Charge lamp | low_side_out | ELITE2500-A-34 | Stepper 1 P4 / DPO | switch_out | single_source | |
| OEM-1-R | Cooling fan relay | low_side_out | ELITE2500-A-18 | DPO 1 | low_side_out | single_source | |
| OEM-1-S | A/C clutch relay | low_side_out | ELITE2500-A-1 | DPO 2 | low_side_out | single_source | |
| OEM-1-U | Front O2 heater | low_side_out | ELITE2500-A-23 | DPO 3 | low_side_out | single_source | |
| OEM-1-V | Neutral switch | digital_in | ELITE2500-A-14 | AVI 10 (TPS) | analog_in | single_source | |
| OEM-2-A | Fuel tank pressure | analog_in | ELITE2500-B-12 | AVI 6 (O2 Input 1) | analog_in | single_source | |
| OEM-2-B | Intake air temperature (IAT) | temp_in | ELITE2500-B-20 | AVI 5 | analog_in | single_source | |
| OEM-2-C | Front O2 signal | lambda_nb_in | ELITE2500-A-17 | AVI 3 | analog_in | single_source | |
| OEM-2-D | Vehicle speed | digital_in | ELITE2500-B-8 | SPI 1 | digital_in | single_source | |
| OEM-2-E | Coolant temperature (ECT) | temp_in | ELITE2500-B-4 | AVI 8 (Coolant Temp) | analog_in | single_source | |
| OEM-2-F | Knock sensor | knock_in | ELITE2500-B-21 | KNOCK 1 | knock_in | single_source | |
| OEM-2-H | Cam position (CMP) | trigger_in | ELITE2500-B-2 | Cam (Home) (+) | trigger_in | single_source | |
| OEM-2-I | +5V sensor supply | vref | ELITE2500-A-9 | +5V DC | vref | single_source | |
| OEM-2-J | Crank position (CKP) | trigger_in | ELITE2500-B-1 | Crank (Trigger) (+) | trigger_in | single_source | |
| OEM-2-K | Tachometer output | tacho_out | — | — | — | single_source | |
| OEM-2-L | Mass air flow (MAF) | analog_in | ELITE2500-B-13 | AVI 1 (O2 Input 2) | analog_in | single_source | |
| OEM-2-M | EGR valve | low_side_out | ELITE2500-A-27 | INJ 5 | injector_out | single_source | |
| OEM-2-N | EGR valve | low_side_out | ELITE2500-A-28 | INJ 6 | injector_out | single_source | |
| OEM-2-O | EGR valve | low_side_out | ELITE2500-A-29 | INJ 7 | injector_out | single_source | |
| OEM-2-P | EGR valve | low_side_out | ELITE2500-A-30 | INJ 8 | injector_out | single_source | |
| OEM-3-A | Power ground | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | single_source | |
| OEM-3-B | Power ground | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | single_source | |
| OEM-3-C | Power ground | ground | ELITE2500-A-10 + ELITE2500-A-11 | Battery ground + Battery ground | ground | single_source | |
| OEM-3-E | Throttle position (TPS) | analog_in | ELITE2500-A-16 | AVI 2 | analog_in | single_source | |
| OEM-3-F | Signal ground | sensor_ground | ELITE2500-B-14 + ELITE2500-B-15 + ELITE2500-B-16 + ELITE2500-B-5 + ELITE2500-B-6 | Signal ground + Signal ground + Signal ground + Crank (Trigger) (−) + Cam (Home) (−) | sensor_ground + trigger_in | single_source | |
| OEM-3-G | Ignition 1 (coils 1+4, wasted spark) | ignition_out | ELITE2500-A-3 | IGN 1 | ignition_out | single_source | |
| OEM-3-H | Ignition 2 (coils 2+3, wasted spark) | ignition_out | ELITE2500-A-4 | IGN 2 | ignition_out | single_source | |
| OEM-3-I | Clutch switch | digital_in | — | — | — | single_source | |
| OEM-3-J | Rear O2 signal | lambda_nb_in | ELITE2500-A-2 | AVI 4 | analog_in | single_source | |
| OEM-3-K | Fuel level | analog_in | ELITE2500-B-3 | AVI 7 (Air Temp) | analog_in | single_source | |
| OEM-3-L | Evap purge solenoid | low_side_out | ELITE2500-B-25 | DBW 1 / DPO | hbridge_out | single_source | |
| OEM-3-M | ISC valve +14V feed | power_in | ELITE2500-A-26 + ELITE2500-B-11 | ECU injector power input + +13.8V ECU supply | power_in | single_source | |
| OEM-3-N | Fuel pump relay | low_side_out | ELITE2500-A-24 | DPO 5 (fuel pump trigger) | low_side_out | single_source | |
| OEM-3-O | ISC valve low side | low_side_out | ELITE2500-A-31 | Stepper 1 P1 / DPO | switch_out | single_source | |
| OEM-3-Q | VICS solenoid (intake butterflies) | low_side_out | ELITE2500-B-26 | DBW 2 / DPO | hbridge_out | single_source | |
| OEM-3-S | EGR boost sensor | analog_in | ELITE2500-A-15 | AVI 9 (MAP) | analog_in | single_source | |
| OEM-3-T | EGR boost solenoid | low_side_out | — | — | — | single_source | |
| OEM-3-U | Canister drain cut valve (CDCV) | low_side_out | — | — | — | single_source | |
| OEM-3-V | Rear O2 heater | low_side_out | ELITE2500-B-19 | DPO 4 | low_side_out | single_source | |
| OEM-3-W | Injector 1 | injector_out | ELITE2500-A-19 | INJ 1 | injector_out | single_source | |
| OEM-3-X | Injector 2 | injector_out | ELITE2500-A-20 | INJ 2 | injector_out | single_source | |
| OEM-3-Y | Injector 3 | injector_out | ELITE2500-A-21 | INJ 3 | injector_out | single_source | |
| OEM-3-Z | Injector 4 | injector_out | ELITE2500-A-22 | INJ 4 | injector_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-1-B | SP-14V-1 | 0.85 | no route | ECU power +14V (main relay) | — | |
| W2 | OEM-3-M | SP-14V-1 | 0.85 | no route | ISC valve +14V feed | — | |
| W3 | SP-14V-1 | ELITE2500-A-26 | 0.85 | no route | ECU injector power input | — | |
| W4 | SP-14V-1 | ELITE2500-B-11 | 0.85 | no route | +13.8V ECU supply | — | |
| W5 | OEM-3-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-3-B | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | OEM-3-C | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W8 | SP-GND-1 | ELITE2500-A-10 | 0.85 | no route | Battery ground | — | |
| W9 | SP-GND-1 | ELITE2500-A-11 | 0.85 | no route | Battery ground | — | |
| W10 | OEM-3-F | SP-0V-1 | 0.5 | no route | Signal ground | — | |
| W11 | SP-0V-1 | ELITE2500-B-14 | 0.5 | no route | Signal ground | — | |
| W12 | SP-0V-1 | ELITE2500-B-15 | 0.5 | no route | Signal ground | — | |
| W13 | SP-0V-1 | ELITE2500-B-16 | 0.5 | no route | Signal ground | — | |
| W14 | OEM-2-I | ELITE2500-A-9 | 0.5 | no route | +5V sensor supply | — | |
| W15 | OEM-2-J | ELITE2500-B-1 | 0.5 | no route | Crank position (CKP) | — | |
| W16 | SP-0V-1 | ELITE2500-B-5 | 0.5 | no route | Crank (Trigger) (−) | — | |
| W17 | OEM-2-H | ELITE2500-B-2 | 0.5 | no route | Cam position (CMP) | — | |
| W18 | SP-0V-1 | ELITE2500-B-6 | 0.5 | no route | Cam (Home) (−) | — | |
| W19 | OEM-2-F | ELITE2500-B-21 | 0.5 | no route | Knock sensor | — | |
| W20 | OEM-3-G | ELITE2500-A-3 | 0.5 | no route | Ignition 1 (coils 1+4, wasted spark) | — | |
| W21 | OEM-3-H | ELITE2500-A-4 | 0.5 | no route | Ignition 2 (coils 2+3, wasted spark) | — | |
| W22 | OEM-3-W | ELITE2500-A-19 | 0.5 | no route | Injector 1 | — | |
| W23 | OEM-3-X | ELITE2500-A-20 | 0.5 | no route | Injector 2 | — | |
| W24 | OEM-3-Y | ELITE2500-A-21 | 0.5 | no route | Injector 3 | — | |
| W25 | OEM-3-Z | ELITE2500-A-22 | 0.5 | no route | Injector 4 | — | |
| W26 | OEM-1-I | ELITE2500-A-25 | 0.5 | no route | Condenser fan relay | — | |
| W27 | OEM-1-R | ELITE2500-A-18 | 0.5 | no route | Cooling fan relay | — | |
| W28 | OEM-1-S | ELITE2500-A-1 | 0.5 | no route | A/C clutch relay | — | |
| W29 | OEM-3-N | ELITE2500-A-24 | 0.5 | no route | Fuel pump relay | — | |
| W30 | OEM-1-U | ELITE2500-A-23 | 0.5 | no route | Front O2 heater | — | |
| W31 | OEM-3-V | ELITE2500-B-19 | 0.5 | no route | Rear O2 heater | — | |
| W32 | OEM-3-O | ELITE2500-A-31 | 0.5 | no route | ISC valve low side | — | |
| W33 | OEM-1-E | ELITE2500-A-32 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W34 | OEM-1-O | ELITE2500-A-33 | 0.5 | no route | Alternator control | — | |
| W35 | OEM-1-Q | ELITE2500-A-34 | 0.5 | no route | Charge lamp | — | |
| W36 | OEM-2-M | ELITE2500-A-27 | 0.5 | no route | EGR valve | — | |
| W37 | OEM-2-N | ELITE2500-A-28 | 0.5 | no route | EGR valve | — | |
| W38 | OEM-2-O | ELITE2500-A-29 | 0.5 | no route | EGR valve | — | |
| W39 | OEM-2-P | ELITE2500-A-30 | 0.5 | no route | EGR valve | — | |
| W40 | OEM-3-L | ELITE2500-B-25 | 0.5 | no route | Evap purge solenoid | — | |
| W41 | OEM-3-Q | ELITE2500-B-26 | 0.5 | no route | VICS solenoid (intake butterflies) | — | |
| W42 | OEM-2-L | ELITE2500-B-13 | 0.5 | no route | Mass air flow (MAF) | — | |
| W43 | OEM-3-E | ELITE2500-A-16 | 0.5 | no route | Throttle position (TPS) | — | |
| W44 | OEM-2-C | ELITE2500-A-17 | 0.5 | no route | Front O2 signal | — | |
| W45 | OEM-3-J | ELITE2500-A-2 | 0.5 | no route | Rear O2 signal | — | |
| W46 | OEM-2-E | ELITE2500-B-4 | 0.5 | no route | Coolant temperature (ECT) | — | |
| W47 | OEM-2-B | ELITE2500-B-20 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W48 | OEM-2-A | ELITE2500-B-12 | 0.5 | no route | Fuel tank pressure | — | |
| W49 | OEM-3-K | ELITE2500-B-3 | 0.5 | no route | Fuel level | — | |
| W50 | OEM-3-S | ELITE2500-A-15 | 0.5 | no route | EGR boost sensor | — | |
| W51 | OEM-2-D | ELITE2500-B-8 | 0.5 | no route | Vehicle speed | — | |
| W52 | OEM-1-F | ELITE2500-B-9 | 0.5 | no route | Brake switch | — | |
| W53 | OEM-1-G | ELITE2500-B-10 | 0.5 | no route | Power steering pressure switch | — | |
| W54 | OEM-1-P | ELITE2500-B-7 | 0.5 | no route | A/C request | — | |
| W55 | OEM-1-V | ELITE2500-A-14 | 0.5 | no route | Neutral switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 174514-6 | TE | AMP Multilock .040/.070 hybrid 16-pin female harness plug (Miata NB1 ECU) | 1.000 | ea |
| connector | 174515-6 | TE | AMP Multilock .040/.070 hybrid 22-pin female harness plug (Miata NA/NB ECU) | 1.000 | ea |
| connector | 174516-6 | TE | AMP Multilock .040/.070 hybrid 26-pin female harness plug (Miata NA/NB ECU) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (15)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-1-V ↔ ELITE2500-A-14 | OEM-1-V "Neutral switch" [digital_in] is wired to ELITE2500-A-14 "AVI 10 (TPS)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-3-L ↔ ELITE2500-B-25 | OEM-3-L "Evap purge solenoid" [low_side_out] is wired to ELITE2500-B-25 "DBW 1 / DPO" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-3-Q ↔ ELITE2500-B-26 | OEM-3-Q "VICS solenoid (intake butterflies)" [low_side_out] is wired to ELITE2500-B-26 "DBW 2 / DPO" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| info | NET_FAMILY | OEM-1-E ↔ ELITE2500-A-32 | OEM-1-E "Malfunction indicator lamp (MIL)" [low_side_out] is wired to ELITE2500-A-32 "Stepper 1 P2 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-1-O ↔ ELITE2500-A-33 | OEM-1-O "Alternator control" [low_side_out] is wired to ELITE2500-A-33 "Stepper 1 P3 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-1-Q ↔ ELITE2500-A-34 | OEM-1-Q "Charge lamp" [low_side_out] is wired to ELITE2500-A-34 "Stepper 1 P4 / DPO" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-2-B ↔ ELITE2500-B-20 | OEM-2-B "Intake air temperature (IAT)" [temp_in] is wired to ELITE2500-B-20 "AVI 5" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-2-E ↔ ELITE2500-B-4 | OEM-2-E "Coolant temperature (ECT)" [temp_in] is wired to ELITE2500-B-4 "AVI 8 (Coolant Temp)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-2-M ↔ ELITE2500-A-27 | OEM-2-M "EGR valve" [low_side_out] is wired to ELITE2500-A-27 "INJ 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-N ↔ ELITE2500-A-28 | OEM-2-N "EGR valve" [low_side_out] is wired to ELITE2500-A-28 "INJ 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-O ↔ ELITE2500-A-29 | OEM-2-O "EGR valve" [low_side_out] is wired to ELITE2500-A-29 "INJ 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-P ↔ ELITE2500-A-30 | OEM-2-P "EGR valve" [low_side_out] is wired to ELITE2500-A-30 "INJ 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-3-F ↔ ELITE2500-B-5 | OEM-3-F "Signal ground" [sensor_ground] is wired to ELITE2500-B-5 "Crank (Trigger) (−)" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-3-O ↔ ELITE2500-A-31 | OEM-3-O "ISC valve low side" [low_side_out] is wired to ELITE2500-A-31 "Stepper 1 P1 / DPO" [switch_out]. Configure this output as low side. |
| info | UNMAPPED | OEM | 4 optional OEM pins are not mapped: OEM-2-K Tachometer output; OEM-3-I Clutch switch; OEM-3-T EGR boost solenoid; OEM-3-U Canister drain cut valve (CDCV) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-1-A | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Not wired: - OEM-1 A: Constant +12V: Haltech Elite 2500 has no battery-constant input; not needed - OEM-3 T: EGR boost solenoid: no free low_side/ls_hs/injector/hbridge on Haltech Elite 2500 - OEM-3 U: Canister drain cut valve (CDCV): no free low_side/ls_hs/injector/hbridge on Haltech Elite 2500 - OEM-2 K: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on Haltech Elite 2500 - OEM-3 I: Clutch switch: no free switch_in/frequency_in/analog_0_5 on Haltech Elite 2500 - ELITE2500-A 13: 12V ignition input: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Haltech Elite 2500 (HT-151300) spec sheet | https://joeblospeedshop.com/wp-content/uploads/2023/11/HT-151300_SPEC-SHEET-2500-ELITE.pdf | archive | 2026-10-05 | c97da78cb851 |
| 4 | vendor_doc | Haltech Elite 2500 — 26-pin connector pinout | https://support.haltech.com/portal/en/kb/articles/main-connector-26-pin-elite2500 | archive | 2026-10-05 | ea6fd4d27ac7 |
| 4 | vendor_doc | Haltech Elite 2500 — 34-pin main connector pinout | https://support.haltech.com/portal/en/kb/articles/main-connector-34-pin-elite2500 | archive | 2026-10-05 | 4e633dff8340 |
| 4 | vendor_doc | Link G4X MX5NB1X install manual (NB1 1999-00) | https://linkecu.com/documentation/MX5XNB1.pdf | archive | 2026-10-05 | 2e36c91270cc |