MX-5 Miata NB2 2001-05 (BP-Z3, VVT) → MoTeC M190 13190 (auto)
MX-5 Miata NB2 2001-05 (BP-Z3, VVT) — MoTeC — M190
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-08
Before you start
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 68 wires · 9 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-2-P | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-4-AF | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | M190-B-H | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | M190-B-J | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | SP-14V-1 | M190-B-K | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | SP-14V-1 | M190-B-L | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-4-AG | M190-A-38 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-3-A | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-3-B | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-4-A | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | M190-B-G | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | M190-B-W | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | M190-B-X | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | M190-B-Y | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | M190-B-Z | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-GND-1 | M190-B-c | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-4-O | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | M190-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | M190-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | M190-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | M190-C-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | M190-C-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | M190-C-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | M190-C-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-4-L | M190-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-3-Y | M190-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-3-V | M190-C-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-4-M | M190-C-51 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-3-F | M190-C-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-3-I | M190-C-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-2-A | M190-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-2-D | M190-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-2-G | M190-B-U | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-2-J | M190-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-2-B | M190-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-2-C | M190-B-V | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-2-K | M190-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-2-M | M190-B-b | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-3-H | M190-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-3-J | M190-B-A | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-3-P | M190-B-B | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-2-Q | M190-B-S | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-2-E | M190-A-48 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-2-F | M190-B-a | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-2-H | M190-A-40 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-2-I | M190-B-T | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-2-N | M190-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-2-R | M190-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-3-D | M190-A-47 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-3-E | M190-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-3-M | M190-A-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-3-U | M190-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-4-D | M190-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-4-X | M190-C-42 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-4-V | M190-C-36 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-4-AA | M190-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-4-W | M190-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-4-P | M190-C-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-4-N | M190-C-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-4-AD | M190-C-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-3-T | M190-C-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-3-S | M190-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-4-B | M190-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-4-C | M190-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-4-F | M190-A-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-4-H | M190-C-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-4-I | M190-C-40 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-4-J | M190-C-47 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | M190-A-16 | M190-A-18 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | M190-A-38 | M190-A-18 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | M190-B-H | M190-A-18 | open (OL) | +12 V supply must not touch sensor ground | |
| 4 | M190-B-H | M190-B-G | open (OL) | +12 V supply must not touch power ground | |
| 5 | M190-A-38 | M190-A-16 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 6 | M190-B-G | M190-A-16 | open (OL) | power ground must not touch 5 V sensor reference | |
| 7 | M190-B-G | M190-A-38 | open (OL) | power ground must not touch +12 V supply | |
| 8 | M190-B-H | M190-A-16 | open (OL) | +12 V supply must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
M190-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Low Side Injector 3 | — | W37 | — | 0.5 | OEM-2-K | — | — | — |
| 10 | Low Side Injector 8 | — | W48 | — | 0.5 | OEM-2-R | — | — | — |
| 11 | Peak Hold Injector 1 | — | W31 | — | 0.5 | OEM-2-A | — | — | — |
| 12 | Peak Hold Injector 2 | — | W34 | — | 0.5 | OEM-2-J | — | — | — |
| 13 | Analogue Voltage Input 11 | — | — | — | — | — | — | — | — |
| 14 | Digital Input 2 | — | W63 | — | 0.5 | OEM-4-B | — | — | — |
| 15 | RS232 Receive | — | — | — | — | — | — | — | — |
| 16 | Sensor 5.0V C3 | — | W25 | — | 0.5 | OEM-4-L | — | — | — |
| 17 | Low Side Injector 11 | — | W51 | — | 0.5 | OEM-3-M | — | — | — |
| 18 | Sensor 0V C1 | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Sensor 0V C2 | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Low Side Injector 2 | — | W35 | — | 0.5 | OEM-2-B | — | — | — |
| 20 | Sensor 0V C3 | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Digital Input 1 | — | W62 | — | 0.5 | OEM-3-S | — | — | — |
| 22 | LIN Bus | — | — | — | — | — | — | — | — |
| 23 | RS232 Transmit | — | — | — | — | — | — | — | — |
| 24 | CAN Bus 2 High | — | — | — | — | — | — | — | — |
| 25 | Low Side Injector 7 | — | W47 | — | 0.5 | OEM-2-N | — | — | — |
| 26 | Peak Hold Injector 3 | — | W53 | — | 0.5 | OEM-4-D | — | — | — |
| 27 | Analogue Voltage Input 15 | — | — | — | — | — | — | — | — |
| 28 | Analogue Voltage Input 16 | — | — | — | — | — | — | — | — |
| 29 | Analogue Voltage Input 17 | — | — | — | — | — | — | — | — |
| 3 | Low Side Injector 1 | — | W32 | — | 0.5 | OEM-2-D | — | — | — |
| 30 | Digital Input 3 | — | W64 | — | 0.5 | OEM-4-C | — | — | — |
| 31 | CAN Bus 2 Low | — | — | — | — | — | — | — | — |
| 32 | Low Side Injector 10 | — | W50 | — | 0.5 | OEM-3-E | — | — | — |
| 33 | Peak Hold Injector 4 | — | — | — | — | — | — | — | — |
| 34 | Analogue Voltage Input 13 | — | — | — | — | — | — | — | — |
| 35 | Analogue Voltage Input 12 | — | — | — | — | — | — | — | — |
| 36 | Peak Hold Injector 7 | — | — | — | — | — | — | — | — |
| 37 | Digital Input 4 | — | W65 | — | 0.5 | OEM-4-F | — | — | — |
| 38 | Battery Backup | — | W7 | — | 0.85 | OEM-4-AG | — | — | — |
| 39 | CAN Bus 3 High | — | — | — | — | — | — | — | — |
| 4 | Low Side Injector 12 | — | W52 | — | 0.5 | OEM-3-U | — | — | — |
| 40 | Low Side Injector 6 | — | W45 | — | 0.5 | OEM-2-H | — | — | — |
| 41 | Analogue Voltage Input 14 | — | — | — | — | — | — | — | — |
| 42 | Peak Hold Injector 9 | — | — | — | — | — | — | — | — |
| 43 | Peak Hold Injector 10 | — | — | — | — | — | — | — | — |
| 44 | Peak Hold Injector 6 | — | — | — | — | — | — | — | — |
| 45 | Peak Hold Injector 5 | — | — | — | — | — | — | — | — |
| 46 | CAN Bus 3 Low | — | — | — | — | — | — | — | — |
| 47 | Low Side Injector 9 | — | W49 | — | 0.5 | OEM-3-D | — | — | — |
| 48 | Low Side Injector 5 | — | W43 | — | 0.5 | OEM-2-E | — | — | — |
| 49 | Peak Hold Injector 11 | — | — | — | — | — | — | — | — |
| 5 | Low Side Injector 4 | — | W39 | — | 0.5 | OEM-3-H | — | — | — |
| 50 | Peak Hold Injector 12 | — | — | — | — | — | — | — | — |
| 51 | Peak Hold Injector 8 | — | — | — | — | — | — | — | — |
| 52 | Low Side Ignition 12 | — | — | — | — | — | — | — | — |
| 53 | Low Side Ignition 9 | — | — | — | — | — | — | — | — |
| 54 | Low Side Ignition 10 | — | — | — | — | — | — | — | — |
| 55 | Low Side Ignition 11 | — | — | — | — | — | — | — | — |
| 6 | Lambda Narrow Input 2 | — | W57 | — | 0.5 | OEM-4-W | — | — | — |
| 7 | Lambda Narrow Input 1 | — | W56 | — | 0.5 | OEM-4-AA | — | — | — |
| 8 | Sensor 5.0V C1 | — | — | — | — | — | — | — | — |
| 9 | Sensor 5.0V C2 | — | — | — | — | — | — | — | — |
M190-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Half Bridge Output 1 | — | W40 | — | 0.5 | OEM-3-J | — | — | — |
| B | Half Bridge Output 2 | — | W41 | — | 0.5 | OEM-3-P | — | — | — |
| C | Half Bridge Output 3 | — | — | — | — | — | — | — | — |
| D | Half Bridge Output 4 | — | — | — | — | — | — | — | — |
| E | Half Bridge Output 5 | — | — | — | — | — | — | — | — |
| F | Half Bridge Output 6 | — | — | — | — | — | — | — | — |
| G | Battery Negative 1 | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| H | Battery Positive 1 | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| J | Battery Positive 2 | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| K | Battery Positive 3 | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| L | Battery Positive 4 | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
| M | Half Bridge Output 10 | — | — | — | — | — | — | — | — |
| N | Half Bridge Output 9 | — | — | — | — | — | — | — | — |
| P | Half Bridge Output 8 | — | — | — | — | — | — | — | — |
| R | Half Bridge Output 7 | — | — | — | — | — | — | — | — |
| S | Low Side Injector 4 | — | W42 | — | 0.5 | OEM-2-Q | — | — | — |
| T | Low Side Injector 6 | — | W46 | — | 0.5 | OEM-2-I | — | — | — |
| U | Low Side Injector 1 | — | W33 | — | 0.5 | OEM-2-G | — | — | — |
| V | Low Side Injector 2 | — | W36 | — | 0.5 | OEM-2-C | — | — | — |
| W | Battery Negative 2 | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| X | Battery Negative 3 | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| Y | Battery Negative 4 | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| Z | Battery Negative 5 | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| a | Low Side Injector 5 | — | W44 | — | 0.5 | OEM-2-F | — | — | — |
| b | Low Side Injector 3 | — | W38 | — | 0.5 | OEM-2-M | — | — | — |
| c | Battery Negative 6 | — | W16 | — | 0.85 | SP-GND-1 | — | — | — |
M190-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Low Side Ignition 4 | — | — | — | — | — | — | — | — |
| 10 | Universal Digital Input 8 | — | — | — | — | — | — | — | — |
| 11 | Analogue Voltage Input 6 | — | — | — | — | — | — | — | — |
| 12 | Analogue Voltage Input 7 | — | — | — | — | — | — | — | — |
| 13 | Analogue Voltage Input 9 | — | — | — | — | — | — | — | — |
| 14 | Sensor 0V A1 | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Sensor 0V A2 | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Low Side Ignition 1 | — | W29 | — | 0.5 | OEM-3-F | — | — | — |
| 17 | Universal Digital Input 7 | — | — | — | — | — | — | — | — |
| 18 | Universal Digital Input 1 | — | W26 | — | 0.5 | OEM-3-Y | — | — | — |
| 19 | Universal Digital Input 12 | — | — | — | — | — | — | — | — |
| 2 | Low Side Ignition 3 | — | — | — | — | — | — | — | — |
| 20 | Universal Digital Input 11 | — | — | — | — | — | — | — | — |
| 21 | Universal Digital Input 10 | — | — | — | — | — | — | — | — |
| 22 | Universal Digital Input 9 | — | — | — | — | — | — | — | — |
| 23 | Sensor 0V B1 | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | CAN Bus 1 High | — | — | — | — | — | — | — | — |
| 25 | Universal Digital Input 3 | — | W61 | — | 0.5 | OEM-3-T | — | — | — |
| 26 | Ethernet Receive - | — | — | — | — | — | — | — | — |
| 27 | Universal Digital Input 4 | — | W66 | — | 0.5 | OEM-4-H | — | — | — |
| 28 | Analogue Voltage Input 4 | — | — | — | — | — | — | — | — |
| 29 | Analogue Voltage Input 5 | — | — | — | — | — | — | — | — |
| 3 | Low Side Ignition 8 | — | — | — | — | — | — | — | — |
| 30 | Sensor 0V B2 | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | CAN Bus 1 Low | — | — | — | — | — | — | — | — |
| 32 | Universal Digital Input 2 | — | W27 | — | 0.5 | OEM-3-V | — | — | — |
| 33 | Ethernet Receive + | — | — | — | — | — | — | — | — |
| 34 | Ethernet Transmit - | — | — | — | — | — | — | — | — |
| 35 | Analogue Voltage Input 3 | — | W60 | — | 0.5 | OEM-4-AD | — | — | — |
| 36 | Analogue Voltage Input 2 | — | W55 | — | 0.5 | OEM-4-V | — | — | — |
| 37 | Analogue Temperature Input 1 | — | W58 | — | 0.5 | OEM-4-P | — | — | — |
| 38 | Analogue Temperature Input 3 | — | — | — | — | — | — | — | — |
| 39 | Analogue Temperature Input 2 | — | W59 | — | 0.5 | OEM-4-N | — | — | — |
| 4 | Low Side Ignition 6 | — | — | — | — | — | — | — | — |
| 40 | Universal Digital Input 5 | — | W67 | — | 0.5 | OEM-4-I | — | — | — |
| 41 | Ethernet Transmit + | — | — | — | — | — | — | — | — |
| 42 | Analogue Voltage Input 1 | — | W54 | — | 0.5 | OEM-4-X | — | — | — |
| 43 | Knock Input 3 | — | — | — | — | — | — | — | — |
| 44 | Knock Input 2 | — | — | — | — | — | — | — | — |
| 45 | Analogue Temperature Input 5 | — | — | — | — | — | — | — | — |
| 46 | Analogue Temperature Input 4 | — | — | — | — | — | — | — | — |
| 47 | Universal Digital Input 6 | — | W68 | — | 0.5 | OEM-4-J | — | — | — |
| 48 | Sensor 5.0V A1 | — | — | — | — | — | — | — | — |
| 49 | Knock Input 4 | — | — | — | — | — | — | — | — |
| 5 | Low Side Ignition 5 | — | — | — | — | — | — | — | — |
| 50 | Sensor 5.0V B1 | — | — | — | — | — | — | — | — |
| 51 | Knock Input 1 | — | W28 | — | 0.5 | OEM-4-M | — | — | — |
| 52 | Analogue Temperature Input 6 | — | — | — | — | — | — | — | — |
| 53 | Sensor 5.0V A2 | — | — | — | — | — | — | — | — |
| 54 | Sensor 6.3V | — | — | — | — | — | — | — | — |
| 55 | Sensor 5.0V B2 | — | — | — | — | — | — | — | — |
| 6 | Analogue Voltage Input 8 | — | — | — | — | — | — | — | — |
| 7 | Analogue Voltage Input 10 | — | — | — | — | — | — | — | — |
| 8 | Low Side Ignition 2 | — | W30 | — | 0.5 | OEM-3-I | — | — | — |
| 9 | Low Side Ignition 7 | — | — | — | — | — | — | — | — |
OEM-2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Injector 1 | — | W31 | — | 0.5 | M190-A-11 | — | — | — |
| B | Cooling fan relay | — | W35 | — | 0.5 | M190-A-2 | — | — | — |
| C | Condenser fan relay | — | W36 | — | 0.5 | M190-B-V | — | — | — |
| D | Injector 2 | — | W32 | — | 0.5 | M190-A-3 | — | — | — |
| E | EGR valve | — | W43 | — | 0.5 | M190-A-48 | — | — | — |
| F | EGR valve | — | W44 | — | 0.5 | M190-B-a | — | — | — |
| G | Injector 3 | — | W33 | — | 0.5 | M190-B-U | — | — | — |
| H | EGR valve | — | W45 | — | 0.5 | M190-A-40 | — | — | — |
| I | EGR valve | — | W46 | — | 0.5 | M190-B-T | — | — | — |
| J | Injector 4 | — | W34 | — | 0.5 | M190-A-12 | — | — | — |
| K | A/C clutch relay | — | W37 | — | 0.5 | M190-A-1 | — | — | — |
| M | Fuel pump relay | — | W38 | — | 0.5 | M190-B-b | — | — | — |
| N | VTCS solenoid (intake butterflies) | — | W47 | — | 0.5 | M190-A-25 | — | — | — |
| P | ISC valve +14V feed | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| Q | ISC valve low side | — | W42 | — | 0.5 | M190-B-S | — | — | — |
| R | Malfunction indicator lamp (MIL) | — | W48 | — | 0.5 | M190-A-10 | — | — | — |
OEM-3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| B | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| D | EGR boost solenoid | — | W49 | — | 0.5 | M190-A-47 | — | — | — |
| E | Charcoal canister purge | — | W50 | — | 0.5 | M190-A-32 | — | — | — |
| F | Ignition 1 (coils 1+4, wasted spark) | — | W29 | — | 0.5 | M190-C-16 | — | — | — |
| H | Main relay | — | W39 | — | 0.5 | M190-A-5 | — | — | — |
| I | Ignition 2 (coils 2+3, wasted spark) | — | W30 | — | 0.5 | M190-C-8 | — | — | — |
| J | Front O2 heater | — | W40 | — | 0.5 | M190-B-A | — | — | — |
| M | Alternator control | — | W51 | — | 0.5 | M190-A-17 | — | — | — |
| O | Tachometer output | — | — | — | — | — | — | — | — |
| P | Rear O2 heater | — | W41 | — | 0.5 | M190-B-B | — | — | — |
| S | Immobiliser | — | W62 | — | 0.5 | M190-A-21 | — | — | — |
| T | Vehicle speed | — | W61 | — | 0.5 | M190-C-25 | — | — | — |
| U | Charge lamp | — | W52 | — | 0.5 | M190-A-4 | — | — | — |
| V | Cam position (CMP) | — | W27 | — | 0.5 | M190-C-32 | — | — | — |
| Y | Crank position (CKP) | — | W26 | — | 0.5 | M190-C-18 | — | — | — |
OEM-4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| AA | Rear O2 signal | — | W56 | — | 0.5 | M190-A-7 | — | — | — |
| AD | Fuel level | — | W60 | — | 0.5 | M190-C-35 | — | — | — |
| AF | ECU power +14V (main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| AG | Constant +12V | — | W7 | — | 0.85 | M190-A-38 | — | — | — |
| B | Brake switch | — | W63 | — | 0.5 | M190-A-14 | — | — | — |
| C | Power steering pressure switch | — | W64 | — | 0.5 | M190-A-30 | — | — | — |
| D | VVT oil-control solenoid | — | W53 | — | 0.5 | M190-A-26 | — | — | — |
| F | A/C request | — | W65 | — | 0.5 | M190-A-37 | — | — | — |
| H | Neutral switch | — | W66 | — | 0.5 | M190-C-27 | — | — | — |
| I | Clutch switch | — | W67 | — | 0.5 | M190-C-40 | — | — | — |
| J | VTCS vacuum switch | — | W68 | — | 0.5 | M190-C-47 | — | — | — |
| L | +5V sensor supply | — | W25 | — | 0.5 | M190-A-16 | — | — | — |
| M | Knock sensor | — | W28 | — | 0.5 | M190-C-51 | — | — | — |
| N | Intake air temperature (IAT) | — | W59 | — | 0.5 | M190-C-39 | — | — | — |
| O | Signal ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| P | Coolant temperature (ECT) | — | W58 | — | 0.5 | M190-C-37 | — | — | — |
| V | Throttle position (TPS) | — | W55 | — | 0.5 | M190-C-36 | — | — | — |
| W | Front O2 signal | — | W57 | — | 0.5 | M190-A-6 | — | — | — |
| X | Mass air flow (MAF) | — | W54 | — | 0.5 | M190-C-42 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W17 | — | 0.5 | OEM-4-O | — | — | — |
| 1 | — | — | W18 | — | 0.5 | M190-A-18 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | M190-A-19 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | M190-A-20 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | M190-C-14 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | M190-C-15 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | M190-C-23 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | M190-C-30 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-2-P | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-4-AF | — | — | — |
| 1 | — | — | W3 | — | 0.85 | M190-B-H | — | — | — |
| 1 | — | — | W4 | — | 0.85 | M190-B-J | — | — | — |
| 1 | — | — | W5 | — | 0.85 | M190-B-K | — | — | — |
| 1 | — | — | W6 | — | 0.85 | M190-B-L | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W8 | — | 0.85 | OEM-3-A | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-3-B | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-4-A | — | — | — |
| 1 | — | — | W11 | — | 0.85 | M190-B-G | — | — | — |
| 1 | — | — | W12 | — | 0.85 | M190-B-W | — | — | — |
| 1 | — | — | W13 | — | 0.85 | M190-B-X | — | — | — |
| 1 | — | — | W14 | — | 0.85 | M190-B-Y | — | — | — |
| 1 | — | — | W15 | — | 0.85 | M190-B-Z | — | — | — |
| 1 | — | — | W16 | — | 0.85 | M190-B-c | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-2-A | Injector 1 | injector_out | M190-A-11 | Peak Hold Injector 1 | injector_out | single_source | |
| OEM-2-B | Cooling fan relay | low_side_out | M190-A-2 | Low Side Injector 2 | injector_out | single_source | |
| OEM-2-C | Condenser fan relay | low_side_out | M190-B-V | Low Side Injector 2 | injector_out | single_source | |
| OEM-2-D | Injector 2 | injector_out | M190-A-3 | Low Side Injector 1 | injector_out | single_source | |
| OEM-2-E | EGR valve | low_side_out | M190-A-48 | Low Side Injector 5 | injector_out | single_source | |
| OEM-2-F | EGR valve | low_side_out | M190-B-a | Low Side Injector 5 | injector_out | single_source | |
| OEM-2-G | Injector 3 | injector_out | M190-B-U | Low Side Injector 1 | injector_out | single_source | |
| OEM-2-H | EGR valve | low_side_out | M190-A-40 | Low Side Injector 6 | injector_out | single_source | |
| OEM-2-I | EGR valve | low_side_out | M190-B-T | Low Side Injector 6 | injector_out | single_source | |
| OEM-2-J | Injector 4 | injector_out | M190-A-12 | Peak Hold Injector 2 | injector_out | single_source | |
| OEM-2-K | A/C clutch relay | low_side_out | M190-A-1 | Low Side Injector 3 | injector_out | single_source | |
| OEM-2-M | Fuel pump relay | low_side_out | M190-B-b | Low Side Injector 3 | injector_out | single_source | |
| OEM-2-N | VTCS solenoid (intake butterflies) | low_side_out | M190-A-25 | Low Side Injector 7 | injector_out | single_source | |
| OEM-2-P | ISC valve +14V feed | power_in | M190-B-H + M190-B-J + M190-B-K + M190-B-L | Battery Positive 1 + Battery Positive 2 + Battery Positive 3 + Battery Positive 4 | power_in | single_source | |
| OEM-2-Q | ISC valve low side | low_side_out | M190-B-S | Low Side Injector 4 | injector_out | single_source | |
| OEM-2-R | Malfunction indicator lamp (MIL) | low_side_out | M190-A-10 | Low Side Injector 8 | injector_out | single_source | |
| OEM-3-A | Power ground | ground | M190-B-G + M190-B-W + M190-B-X + M190-B-Y + M190-B-Z + M190-B-c | Battery Negative 1 + Battery Negative 2 + Battery Negative 3 + Battery Negative 4 + Battery Negative 5 + Battery Negative 6 | ground | single_source | |
| OEM-3-B | Power ground | ground | M190-B-G + M190-B-W + M190-B-X + M190-B-Y + M190-B-Z + M190-B-c | Battery Negative 1 + Battery Negative 2 + Battery Negative 3 + Battery Negative 4 + Battery Negative 5 + Battery Negative 6 | ground | single_source | |
| OEM-3-D | EGR boost solenoid | low_side_out | M190-A-47 | Low Side Injector 9 | injector_out | single_source | |
| OEM-3-E | Charcoal canister purge | low_side_out | M190-A-32 | Low Side Injector 10 | injector_out | single_source | |
| OEM-3-F | Ignition 1 (coils 1+4, wasted spark) | ignition_out | M190-C-16 | Low Side Ignition 1 | ignition_out | single_source | |
| OEM-3-H | Main relay | low_side_out | M190-A-5 | Low Side Injector 4 | injector_out | single_source | |
| OEM-3-I | Ignition 2 (coils 2+3, wasted spark) | ignition_out | M190-C-8 | Low Side Ignition 2 | ignition_out | single_source | |
| OEM-3-J | Front O2 heater | low_side_out | M190-B-A | Half Bridge Output 1 | hbridge_out | single_source | |
| OEM-3-M | Alternator control | low_side_out | M190-A-17 | Low Side Injector 11 | injector_out | single_source | |
| OEM-3-O | Tachometer output | tacho_out | — | — | — | single_source | |
| OEM-3-P | Rear O2 heater | low_side_out | M190-B-B | Half Bridge Output 2 | hbridge_out | single_source | |
| OEM-3-S | Immobiliser | digital_in | M190-A-21 | Digital Input 1 | digital_in | single_source | |
| OEM-3-T | Vehicle speed | digital_in | M190-C-25 | Universal Digital Input 3 | digital_in | single_source | |
| OEM-3-U | Charge lamp | low_side_out | M190-A-4 | Low Side Injector 12 | injector_out | single_source | |
| OEM-3-V | Cam position (CMP) | trigger_in | M190-C-32 | Universal Digital Input 2 | digital_in | single_source | |
| OEM-3-Y | Crank position (CKP) | trigger_in | M190-C-18 | Universal Digital Input 1 | digital_in | single_source | |
| OEM-4-A | Power ground | ground | M190-B-G + M190-B-W + M190-B-X + M190-B-Y + M190-B-Z + M190-B-c | Battery Negative 1 + Battery Negative 2 + Battery Negative 3 + Battery Negative 4 + Battery Negative 5 + Battery Negative 6 | ground | single_source | |
| OEM-4-AA | Rear O2 signal | lambda_nb_in | M190-A-7 | Lambda Narrow Input 1 | lambda_nb_in | single_source | |
| OEM-4-AD | Fuel level | analog_in | M190-C-35 | Analogue Voltage Input 3 | analog_in | single_source | |
| OEM-4-AF | ECU power +14V (main relay) | power_in | M190-B-H + M190-B-J + M190-B-K + M190-B-L | Battery Positive 1 + Battery Positive 2 + Battery Positive 3 + Battery Positive 4 | power_in | single_source | |
| OEM-4-AG | Constant +12V | power_in | M190-A-38 | Battery Backup | power_in | single_source | |
| OEM-4-B | Brake switch | digital_in | M190-A-14 | Digital Input 2 | digital_in | single_source | |
| OEM-4-C | Power steering pressure switch | digital_in | M190-A-30 | Digital Input 3 | digital_in | single_source | |
| OEM-4-D | VVT oil-control solenoid | low_side_out | M190-A-26 | Peak Hold Injector 3 | injector_out | single_source | |
| OEM-4-F | A/C request | digital_in | M190-A-37 | Digital Input 4 | digital_in | single_source | |
| OEM-4-H | Neutral switch | digital_in | M190-C-27 | Universal Digital Input 4 | digital_in | single_source | |
| OEM-4-I | Clutch switch | digital_in | M190-C-40 | Universal Digital Input 5 | digital_in | single_source | |
| OEM-4-J | VTCS vacuum switch | digital_in | M190-C-47 | Universal Digital Input 6 | digital_in | single_source | |
| OEM-4-L | +5V sensor supply | vref | M190-A-16 | Sensor 5.0V C3 | vref | single_source | |
| OEM-4-M | Knock sensor | knock_in | M190-C-51 | Knock Input 1 | knock_in | single_source | |
| OEM-4-N | Intake air temperature (IAT) | temp_in | M190-C-39 | Analogue Temperature Input 2 | temp_in | single_source | |
| OEM-4-O | Signal ground | sensor_ground | M190-A-18 + M190-A-19 + M190-A-20 + M190-C-14 + M190-C-15 + M190-C-23 + M190-C-30 | Sensor 0V C1 + Sensor 0V C2 + Sensor 0V C3 + Sensor 0V A1 + Sensor 0V A2 + Sensor 0V B1 + Sensor 0V B2 | sensor_ground | single_source | |
| OEM-4-P | Coolant temperature (ECT) | temp_in | M190-C-37 | Analogue Temperature Input 1 | temp_in | single_source | |
| OEM-4-V | Throttle position (TPS) | analog_in | M190-C-36 | Analogue Voltage Input 2 | analog_in | single_source | |
| OEM-4-W | Front O2 signal | lambda_nb_in | M190-A-6 | Lambda Narrow Input 2 | lambda_nb_in | single_source | |
| OEM-4-X | Mass air flow (MAF) | analog_in | M190-C-42 | Analogue Voltage Input 1 | analog_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-2-P | SP-14V-1 | 0.85 | no route | ISC valve +14V feed | — | |
| W2 | OEM-4-AF | SP-14V-1 | 0.85 | no route | ECU power +14V (main relay) | — | |
| W3 | SP-14V-1 | M190-B-H | 0.85 | no route | Battery Positive 1 | — | |
| W4 | SP-14V-1 | M190-B-J | 0.85 | no route | Battery Positive 2 | — | |
| W5 | SP-14V-1 | M190-B-K | 0.85 | no route | Battery Positive 3 | — | |
| W6 | SP-14V-1 | M190-B-L | 0.85 | no route | Battery Positive 4 | — | |
| W7 | OEM-4-AG | M190-A-38 | 0.85 | no route | Constant +12V | — | |
| W8 | OEM-3-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W9 | OEM-3-B | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W10 | OEM-4-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | M190-B-G | 0.85 | no route | Battery Negative 1 | — | |
| W12 | SP-GND-1 | M190-B-W | 0.85 | no route | Battery Negative 2 | — | |
| W13 | SP-GND-1 | M190-B-X | 0.85 | no route | Battery Negative 3 | — | |
| W14 | SP-GND-1 | M190-B-Y | 0.85 | no route | Battery Negative 4 | — | |
| W15 | SP-GND-1 | M190-B-Z | 0.85 | no route | Battery Negative 5 | — | |
| W16 | SP-GND-1 | M190-B-c | 0.85 | no route | Battery Negative 6 | — | |
| W17 | OEM-4-O | SP-0V-1 | 0.5 | no route | Signal ground | — | |
| W18 | SP-0V-1 | M190-A-18 | 0.5 | no route | Sensor 0V C1 | — | |
| W19 | SP-0V-1 | M190-A-19 | 0.5 | no route | Sensor 0V C2 | — | |
| W20 | SP-0V-1 | M190-A-20 | 0.5 | no route | Sensor 0V C3 | — | |
| W21 | SP-0V-1 | M190-C-14 | 0.5 | no route | Sensor 0V A1 | — | |
| W22 | SP-0V-1 | M190-C-15 | 0.5 | no route | Sensor 0V A2 | — | |
| W23 | SP-0V-1 | M190-C-23 | 0.5 | no route | Sensor 0V B1 | — | |
| W24 | SP-0V-1 | M190-C-30 | 0.5 | no route | Sensor 0V B2 | — | |
| W25 | OEM-4-L | M190-A-16 | 0.5 | no route | +5V sensor supply | — | |
| W26 | OEM-3-Y | M190-C-18 | 0.5 | no route | Crank position (CKP) | — | |
| W27 | OEM-3-V | M190-C-32 | 0.5 | no route | Cam position (CMP) | — | |
| W28 | OEM-4-M | M190-C-51 | 0.5 | no route | Knock sensor | — | |
| W29 | OEM-3-F | M190-C-16 | 0.5 | no route | Ignition 1 (coils 1+4, wasted spark) | — | |
| W30 | OEM-3-I | M190-C-8 | 0.5 | no route | Ignition 2 (coils 2+3, wasted spark) | — | |
| W31 | OEM-2-A | M190-A-11 | 0.5 | no route | Injector 1 | — | |
| W32 | OEM-2-D | M190-A-3 | 0.5 | no route | Injector 2 | — | |
| W33 | OEM-2-G | M190-B-U | 0.5 | no route | Injector 3 | — | |
| W34 | OEM-2-J | M190-A-12 | 0.5 | no route | Injector 4 | — | |
| W35 | OEM-2-B | M190-A-2 | 0.5 | no route | Cooling fan relay | — | |
| W36 | OEM-2-C | M190-B-V | 0.5 | no route | Condenser fan relay | — | |
| W37 | OEM-2-K | M190-A-1 | 0.5 | no route | A/C clutch relay | — | |
| W38 | OEM-2-M | M190-B-b | 0.5 | no route | Fuel pump relay | — | |
| W39 | OEM-3-H | M190-A-5 | 0.5 | no route | Main relay | — | |
| W40 | OEM-3-J | M190-B-A | 0.5 | no route | Front O2 heater | — | |
| W41 | OEM-3-P | M190-B-B | 0.5 | no route | Rear O2 heater | — | |
| W42 | OEM-2-Q | M190-B-S | 0.5 | no route | ISC valve low side | — | |
| W43 | OEM-2-E | M190-A-48 | 0.5 | no route | EGR valve | — | |
| W44 | OEM-2-F | M190-B-a | 0.5 | no route | EGR valve | — | |
| W45 | OEM-2-H | M190-A-40 | 0.5 | no route | EGR valve | — | |
| W46 | OEM-2-I | M190-B-T | 0.5 | no route | EGR valve | — | |
| W47 | OEM-2-N | M190-A-25 | 0.5 | no route | VTCS solenoid (intake butterflies) | — | |
| W48 | OEM-2-R | M190-A-10 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W49 | OEM-3-D | M190-A-47 | 0.5 | no route | EGR boost solenoid | — | |
| W50 | OEM-3-E | M190-A-32 | 0.5 | no route | Charcoal canister purge | — | |
| W51 | OEM-3-M | M190-A-17 | 0.5 | no route | Alternator control | — | |
| W52 | OEM-3-U | M190-A-4 | 0.5 | no route | Charge lamp | — | |
| W53 | OEM-4-D | M190-A-26 | 0.5 | no route | VVT oil-control solenoid | — | |
| W54 | OEM-4-X | M190-C-42 | 0.5 | no route | Mass air flow (MAF) | — | |
| W55 | OEM-4-V | M190-C-36 | 0.5 | no route | Throttle position (TPS) | — | |
| W56 | OEM-4-AA | M190-A-7 | 0.5 | no route | Rear O2 signal | — | |
| W57 | OEM-4-W | M190-A-6 | 0.5 | no route | Front O2 signal | — | |
| W58 | OEM-4-P | M190-C-37 | 0.5 | no route | Coolant temperature (ECT) | — | |
| W59 | OEM-4-N | M190-C-39 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W60 | OEM-4-AD | M190-C-35 | 0.5 | no route | Fuel level | — | |
| W61 | OEM-3-T | M190-C-25 | 0.5 | no route | Vehicle speed | — | |
| W62 | OEM-3-S | M190-A-21 | 0.5 | no route | Immobiliser | — | |
| W63 | OEM-4-B | M190-A-14 | 0.5 | no route | Brake switch | — | |
| W64 | OEM-4-C | M190-A-30 | 0.5 | no route | Power steering pressure switch | — | |
| W65 | OEM-4-F | M190-A-37 | 0.5 | no route | A/C request | — | |
| W66 | OEM-4-H | M190-C-27 | 0.5 | no route | Neutral switch | — | |
| W67 | OEM-4-I | M190-C-40 | 0.5 | no route | Clutch switch | — | |
| W68 | OEM-4-J | M190-C-47 | 0.5 | no route | VTCS vacuum switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (22)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-3-J ↔ M190-B-A | OEM-3-J "Front O2 heater" [low_side_out] is wired to M190-B-A "Half Bridge Output 1" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-3-P ↔ M190-B-B | OEM-3-P "Rear O2 heater" [low_side_out] is wired to M190-B-B "Half Bridge Output 2" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-3-V ↔ M190-C-32 | OEM-3-V "Cam position (CMP)" [trigger_in] is wired to M190-C-32 "Universal Digital Input 2" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-3-Y ↔ M190-C-18 | OEM-3-Y "Crank position (CKP)" [trigger_in] is wired to M190-C-18 "Universal Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-2-B ↔ M190-A-2 | OEM-2-B "Cooling fan relay" [low_side_out] is wired to M190-A-2 "Low Side Injector 2" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-C ↔ M190-B-V | OEM-2-C "Condenser fan relay" [low_side_out] is wired to M190-B-V "Low Side Injector 2" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-E ↔ M190-A-48 | OEM-2-E "EGR valve" [low_side_out] is wired to M190-A-48 "Low Side Injector 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-F ↔ M190-B-a | OEM-2-F "EGR valve" [low_side_out] is wired to M190-B-a "Low Side Injector 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-H ↔ M190-A-40 | OEM-2-H "EGR valve" [low_side_out] is wired to M190-A-40 "Low Side Injector 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-I ↔ M190-B-T | OEM-2-I "EGR valve" [low_side_out] is wired to M190-B-T "Low Side Injector 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-K ↔ M190-A-1 | OEM-2-K "A/C clutch relay" [low_side_out] is wired to M190-A-1 "Low Side Injector 3" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-M ↔ M190-B-b | OEM-2-M "Fuel pump relay" [low_side_out] is wired to M190-B-b "Low Side Injector 3" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-N ↔ M190-A-25 | OEM-2-N "VTCS solenoid (intake butterflies)" [low_side_out] is wired to M190-A-25 "Low Side Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-Q ↔ M190-B-S | OEM-2-Q "ISC valve low side" [low_side_out] is wired to M190-B-S "Low Side Injector 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-R ↔ M190-A-10 | OEM-2-R "Malfunction indicator lamp (MIL)" [low_side_out] is wired to M190-A-10 "Low Side Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-3-D ↔ M190-A-47 | OEM-3-D "EGR boost solenoid" [low_side_out] is wired to M190-A-47 "Low Side Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-3-E ↔ M190-A-32 | OEM-3-E "Charcoal canister purge" [low_side_out] is wired to M190-A-32 "Low Side Injector 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-3-H ↔ M190-A-5 | OEM-3-H "Main relay" [low_side_out] is wired to M190-A-5 "Low Side Injector 4" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-3-M ↔ M190-A-17 | OEM-3-M "Alternator control" [low_side_out] is wired to M190-A-17 "Low Side Injector 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-3-U ↔ M190-A-4 | OEM-3-U "Charge lamp" [low_side_out] is wired to M190-A-4 "Low Side Injector 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-4-D ↔ M190-A-26 | OEM-4-D "VVT oil-control solenoid" [low_side_out] is wired to M190-A-26 "Peak Hold Injector 3" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 1 optional OEM pins are not mapped: OEM-3-O Tachometer output |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Not wired: - OEM-3 O: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on MoTeC M190
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G4X MX5NB2X install manual (NB2 2001-05) | https://linkecu.com/documentation/MX5XNB2.pdf | archive | 2026-10-05 | 741efdd9f2c8 |
| 4 | vendor_doc | MoTeC: M1 ECU Hardware manual (7 Nov 2013) — M130/M150/M170/M190 pinout tables | https://web.archive.org/web/2023id_/https://www.motec.com.au/hessian/uploads/M1_ECU_Hardware_c2517380e4.pdf | — | 2026-10-05 | 03dc5975f739 |