RSX Type-S 2005-06 (K20Z1) → ECUMASTER EMU Black (auto)
RSX Type-S 2005-06 (K20Z1) — ECUMASTER — EMU Black
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-08
Before you start
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 63 wires · 9 connectors · 4 part lines |
| Tools | 715131-1 · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 316836-1 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A-3 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A-8 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-E-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-A-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-A-24 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E-5 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-A-20 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-E-6 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-A-21 | EMUBLACK-Black-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-A-7 | EMUBLACK-Black-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-A-19 | EMUBLACK-Black-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-A-6 | EMUBLACK-Black-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-A-1 | EMUBLACK-Black-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A-16 | EMUBLACK-Grey-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-A-15 | EMUBLACK-Grey-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-A-14 | EMUBLACK-Grey-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-A-13 | EMUBLACK-Black-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-B-5 | EMUBLACK-Grey-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-B-4 | EMUBLACK-Grey-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-B-3 | EMUBLACK-Grey-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-B-2 | EMUBLACK-Grey-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E-10 | EMUBLACK-Grey-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E-8 | EMUBLACK-Grey-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E-12 | EMUBLACK-Grey-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E-17 | EMUBLACK-Grey-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E-18 | EMUBLACK-Grey-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E-9 | EMUBLACK-Grey-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E-21 | EMUBLACK-Grey-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A-10 | EMUBLACK-Grey-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A-12 | EMUBLACK-Grey-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-B-6 | EMUBLACK-Grey-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-B-1 | EMUBLACK-Grey-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-B-18 | EMUBLACK-Grey-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-B-21 | EMUBLACK-Grey-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E-19 | EMUBLACK-Grey-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A-31 | EMUBLACK-Black-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A-28 | EMUBLACK-Black-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A-30 | EMUBLACK-Black-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A-29 | EMUBLACK-Black-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E-20 | EMUBLACK-Black-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-B-8 | EMUBLACK-Black-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-B-17 | EMUBLACK-Black-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-B-13 | EMUBLACK-Black-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E-14 | EMUBLACK-Black-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E-15 | EMUBLACK-Black-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A-18 | EMUBLACK-Black-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-B-10 | EMUBLACK-Black-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-B-11 | EMUBLACK-Black-36 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-E-16 | EMUBLACK-Black-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-E-22 | EMUBLACK-Black-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUBLACK-Black-13 | EMUBLACK-Black-27 | open (OL) | +12 V supply must not touch power ground | |
| 2 | EMUBLACK-Black-13 | EMUBLACK-Black-29 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | EMUBLACK-Black-26 | EMUBLACK-Black-29 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 4 | EMUBLACK-Black-34 | EMUBLACK-Black-29 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 5 | EMUBLACK-Black-13 | EMUBLACK-Black-26 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 6 | EMUBLACK-Black-13 | EMUBLACK-Black-34 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 7 | EMUBLACK-Black-27 | EMUBLACK-Black-26 | open (OL) | power ground must not touch 5 V sensor reference | |
| 8 | EMUBLACK-Black-27 | EMUBLACK-Black-34 | open (OL) | power ground must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUBLACK-Black
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #5 | — | — | — | — | — | — | — | — |
| 10 | Switch #1 In | — | W59 | — | 0.5 | OEM-A-18 | — | — | — |
| 11 | RS232 TXD | — | — | — | — | — | — | — | — |
| 12 | CAN H | — | — | — | — | — | — | — | — |
| 13 | Battery +12V | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Ignition coil #4 | — | W30 | — | 0.5 | OEM-A-13 | — | — | — |
| 15 | EGT in #2 | — | — | — | — | — | — | — | — |
| 16 | Knock Sensor in #2 | — | — | — | — | — | — | — | — |
| 17 | Analog In #3 | — | W56 | — | 0.5 | OEM-B-13 | — | — | — |
| 18 | TPS In | — | W52 | — | 0.5 | OEM-A-29 | — | — | — |
| 19 | WBO Ip | — | W49 | — | 0.5 | OEM-A-31 | — | — | — |
| 2 | EGT in #1 | — | — | — | — | — | — | — | — |
| 20 | VSS In | — | W62 | — | 0.5 | OEM-E-16 | — | — | — |
| 21 | Camsync In #1 | — | W24 | — | 0.5 | OEM-A-19 | — | — | — |
| 22 | WBO Rcal | — | — | — | — | — | — | — | — |
| 23 | Switch #2 In | — | W60 | — | 0.5 | OEM-B-10 | — | — | — |
| 24 | RS232 RXD | — | — | — | — | — | — | — | — |
| 25 | CAN L | — | — | — | — | — | — | — | — |
| 26 | +5V supply | — | W21 | — | 0.5 | SP-5V1-1 | — | — | — |
| 27 | Power Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 28 | Ecu Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Sensor Ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Knock Sensor in #1 | — | W26 | — | 0.5 | OEM-A-1 | — | — | — |
| 30 | Analog In #4 | — | W58 | — | 0.5 | OEM-E-15 | — | — | — |
| 31 | Analog In #1 | — | W51 | — | 0.5 | OEM-A-30 | — | — | — |
| 32 | IAT In | — | W54 | — | 0.5 | OEM-B-8 | — | — | — |
| 33 | WBO VGND | — | — | — | — | — | — | — | — |
| 34 | +5V supply | — | W22 | — | 0.5 | OEM-A-21 | — | — | — |
| 35 | Analog In #5 | — | W63 | — | 0.5 | OEM-E-22 | — | — | — |
| 36 | Switch #3 In | — | W61 | — | 0.5 | OEM-B-11 | — | — | — |
| 37 | Analog In #6 | — | — | — | — | — | — | — | — |
| 38 | Sensor Ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 39 | Sensor Ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | Analog In #2 | — | W53 | — | 0.5 | OEM-E-20 | — | — | — |
| 5 | CLT In | — | W55 | — | 0.5 | OEM-B-17 | — | — | — |
| 6 | WBO Vs | — | W50 | — | 0.5 | OEM-A-28 | — | — | — |
| 7 | Camsync In #2 | — | W25 | — | 0.5 | OEM-A-6 | — | — | — |
| 8 | Primary trigger | — | W23 | — | 0.5 | OEM-A-7 | — | — | — |
| 9 | Flex Fuel In | — | W57 | — | 0.5 | OEM-E-14 | — | — | — |
EMUBLACK-Grey
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #6 | — | — | — | — | — | — | — | — |
| 10 | H-Bridge #1 Winding B | — | W45 | — | 0.5 | OEM-B-1 | — | — | — |
| 11 | H-Bridge #2 Winding B | — | W47 | — | 0.5 | OEM-B-21 | — | — | — |
| 12 | AUX 5 | — | W40 | — | 0.5 | OEM-E-9 | — | — | — |
| 13 | AUX 2 / Injector #8 | — | W37 | — | 0.5 | OEM-E-12 | — | — | — |
| 14 | Injector #5 | — | W43 | — | 0.5 | OEM-A-12 | — | — | — |
| 15 | Injector #2 | — | W32 | — | 0.5 | OEM-B-4 | — | — | — |
| 16 | Ignition coil #2 | — | W28 | — | 0.5 | OEM-A-15 | — | — | — |
| 17 | Power Ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition +12V | — | W35 | — | 0.5 | OEM-E-10 | — | — | — |
| 19 | WBO Heater | — | W41 | — | 0.5 | OEM-E-21 | — | — | — |
| 2 | H-Bridge #1 Winding A | — | W46 | — | 0.5 | OEM-B-18 | — | — | — |
| 20 | AUX 4 / Tacho | — | W39 | — | 0.5 | OEM-E-18 | — | — | — |
| 21 | AUX 1 / Injector #7 | — | W36 | — | 0.5 | OEM-E-8 | — | — | — |
| 22 | Injector #6 | — | W44 | — | 0.5 | OEM-B-6 | — | — | — |
| 23 | Injector #3 | — | W33 | — | 0.5 | OEM-B-3 | — | — | — |
| 24 | Power Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | H-Bridge #2 Winding A | — | W48 | — | 0.5 | OEM-E-19 | — | — | — |
| 4 | AUX 6 | — | W42 | — | 0.5 | OEM-A-10 | — | — | — |
| 5 | AUX 3 | — | W38 | — | 0.5 | OEM-E-17 | — | — | — |
| 6 | Injector #4 | — | W34 | — | 0.5 | OEM-B-2 | — | — | — |
| 7 | Injector #1 | — | W31 | — | 0.5 | OEM-B-5 | — | — | — |
| 8 | Ignition coil #1 | — | W27 | — | 0.5 | OEM-A-16 | — | — | — |
| 9 | Ignition coil #3 | — | W29 | — | 0.5 | OEM-A-14 | — | — | — |
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Knock sensor (KS) | — | W26 | — | 0.5 | EMUBLACK-Black-3 | — | — | — |
| 2 | Ignition power 2 (IGP2) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Ignition power 1 (IGP1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Power ground 2 (PG2) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground 1 (PG1) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Camshaft position B (CMP B) | — | W25 | — | 0.5 | EMUBLACK-Black-7 | — | — | — |
| 7 | Crank position sensor (CKP) | — | W23 | — | 0.5 | EMUBLACK-Black-8 | — | — | — |
| 8 | Logic ground 2 (LG2) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Logic ground 1 (LG1) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | A/F sensor heater control (AFSHTC) | — | W42 | — | 0.5 | EMUBLACK-Grey-4 | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | Idle air control valve (IACV) | — | W43 | — | 0.5 | EMUBLACK-Grey-14 | — | — | — |
| 13 | Ignition coil 4 (IGPLS4) | — | W30 | — | 0.5 | EMUBLACK-Black-14 | — | — | — |
| 14 | Ignition coil 3 (IGPLS3) | — | W29 | — | 0.5 | EMUBLACK-Grey-9 | — | — | — |
| 15 | Ignition coil 2 (IGPLS2) | — | W28 | — | 0.5 | EMUBLACK-Grey-16 | — | — | — |
| 16 | Ignition coil 1 (IGPLS1) | — | W27 | — | 0.5 | EMUBLACK-Grey-8 | — | — | — |
| 17 | — | — | — | — | — | — | — | — | — |
| 18 | Neutral position switch (NC) | — | W59 | — | 0.5 | EMUBLACK-Black-10 | — | — | — |
| 19 | Camshaft position A (CMP A) | — | W24 | — | 0.5 | EMUBLACK-Black-21 | — | — | — |
| 20 | Sensor 5V supply 2 (VCC2) | — | W19 | — | 0.5 | SP-5V1-1 | — | — | — |
| 21 | Sensor 5V supply 1 (VCC1) | — | W22 | — | 0.5 | EMUBLACK-Black-34 | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | Sensor ground 2 (SG2) | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Sensor ground 1 (SG1) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 25 | — | — | — | — | — | — | — | — | — |
| 26 | — | — | — | — | — | — | — | — | — |
| 27 | — | — | — | — | — | — | — | — | — |
| 28 | A/F sensor - (AFS-, wideband Vs) | — | W50 | — | 0.5 | EMUBLACK-Black-6 | — | — | — |
| 29 | Throttle position sensor (TPS) | — | W52 | — | 0.5 | EMUBLACK-Black-18 | — | — | — |
| 30 | Manifold absolute pressure (MAP) | — | W51 | — | 0.5 | EMUBLACK-Black-31 | — | — | — |
| 31 | A/F sensor + (AFS+, wideband Ip) | — | W49 | — | 0.5 | EMUBLACK-Black-19 | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | VTC oil control solenoid (+) | — | W45 | — | 0.5 | EMUBLACK-Grey-10 | — | — | — |
| 2 | Injector 4 (INJ4) | — | W34 | — | 0.5 | EMUBLACK-Grey-6 | — | — | — |
| 3 | Injector 3 (INJ3) | — | W33 | — | 0.5 | EMUBLACK-Grey-23 | — | — | — |
| 4 | Injector 2 (INJ2) | — | W32 | — | 0.5 | EMUBLACK-Grey-15 | — | — | — |
| 5 | Injector 1 (INJ1) | — | W31 | — | 0.5 | EMUBLACK-Grey-7 | — | — | — |
| 6 | VTEC solenoid (VTS) | — | W44 | — | 0.5 | EMUBLACK-Grey-22 | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | Coolant temp sensor (ECT) | — | W54 | — | 0.5 | EMUBLACK-Black-32 | — | — | — |
| 9 | — | — | — | — | — | — | — | — | — |
| 10 | Alternator L signal (ALTL) | — | W60 | — | 0.5 | EMUBLACK-Black-23 | — | — | — |
| 11 | VTEC oil pressure switch (VTPSW) | — | W61 | — | 0.5 | EMUBLACK-Black-36 | — | — | — |
| 12 | — | — | — | — | — | — | — | — | — |
| 13 | Alternator FR signal (ALTF) | — | W56 | — | 0.5 | EMUBLACK-Black-17 | — | — | — |
| 14 | — | — | — | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — | — | — | — |
| 16 | — | — | — | — | — | — | — | — | — |
| 17 | Intake air temp sensor (IAT) | — | W55 | — | 0.5 | EMUBLACK-Black-5 | — | — | — |
| 18 | Alternator control (ALTC) | — | W46 | — | 0.5 | EMUBLACK-Grey-2 | — | — | — |
| 19 | — | — | — | — | — | — | — | — | — |
| 20 | — | — | — | — | — | — | — | — | — |
| 21 | Evap canister purge valve (PCS) | — | W47 | — | 0.5 | EMUBLACK-Grey-11 | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | — | — | — | — | — | — | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
OEM-E
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | — | — | — | — | — | — | — |
| 2 | — | — | — | — | — | — | — | — | — |
| 3 | Reverse lockout solenoid (RVS, Type-S) | — | — | — | — | — | — | — | — |
| 4 | Logic ground 3 (LG3) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Sensor ground 3 (SG3) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor 5V supply 3 (VCC3) | — | W20 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | Main relay control (MRLY) | — | W36 | — | 0.5 | EMUBLACK-Grey-21 | — | — | — |
| 9 | A/F sensor heater relay control (AFSHTCR) | — | W40 | — | 0.5 | EMUBLACK-Grey-12 | — | — | — |
| 10 | Ignition switch signal (IG1) | — | W35 | — | 0.5 | EMUBLACK-Grey-18 | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | Radiator fan control (FANC) | — | W37 | — | 0.5 | EMUBLACK-Grey-13 | — | — | — |
| 13 | Multiplex communication (SEFMJ) | — | — | — | — | — | — | — | — |
| 14 | Fuel tank pressure sensor (FTP) | — | W57 | — | 0.5 | EMUBLACK-Black-9 | — | — | — |
| 15 | Electrical load detector (ELD) | — | W58 | — | 0.5 | EMUBLACK-Black-30 | — | — | — |
| 16 | Power steering pressure switch (PSPSW) | — | W62 | — | 0.5 | EMUBLACK-Black-20 | — | — | — |
| 17 | Immobilizer fuel pump relay (IMO FPR) | — | W38 | — | 0.5 | EMUBLACK-Grey-5 | — | — | — |
| 18 | A/C clutch relay (ACC) | — | W39 | — | 0.5 | EMUBLACK-Grey-20 | — | — | — |
| 19 | Evap vent shut valve (VSV) | — | W48 | — | 0.5 | EMUBLACK-Grey-3 | — | — | — |
| 20 | Secondary heated O2 sensor (SHO2S) | — | W53 | — | 0.5 | EMUBLACK-Black-4 | — | — | — |
| 21 | Secondary O2 heater control (SO2SHTC) | — | W41 | — | 0.5 | EMUBLACK-Grey-19 | — | — | — |
| 22 | Brake switch (BKSW) | — | W63 | — | 0.5 | EMUBLACK-Black-35 | — | — | — |
| 23 | K-line (diagnostic) | — | — | — | — | — | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
| 25 | Engine speed pulse / tacho (NEP) | — | — | — | — | — | — | — | — |
| 26 | Vehicle speed output (VSSOUT) | — | — | — | — | — | — | — | — |
| 27 | Immobilizer code (IMOCD) | — | — | — | — | — | — | — | — |
| 28 | — | — | — | — | — | — | — | — | — |
| 29 | Service check signal (SCS) | — | — | — | — | — | — | — | — |
| 30 | Write enable signal (WEN) | — | — | — | — | — | — | — | — |
| 31 | Malfunction indicator lamp (MIL) | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-A-24 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-A-23 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-E-5 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | EMUBLACK-Black-29 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | EMUBLACK-Black-38 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | EMUBLACK-Black-39 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-2 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A-3 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | EMUBLACK-Black-13 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W19 | — | 0.5 | OEM-A-20 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-E-6 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | EMUBLACK-Black-26 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-A-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A-5 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A-8 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A-9 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-E-4 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | EMUBLACK-Black-27 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | EMUBLACK-Black-28 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | EMUBLACK-Grey-17 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | EMUBLACK-Grey-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Knock sensor (KS) | knock_in | EMUBLACK-Black-3 | Knock Sensor in #1 | knock_in | single_source | |
| OEM-A-10 | A/F sensor heater control (AFSHTC) | low_side_out | EMUBLACK-Grey-4 | AUX 6 | low_side_out | single_source | |
| OEM-A-12 | Idle air control valve (IACV) | low_side_out | EMUBLACK-Grey-14 | Injector #5 | injector_out | single_source | |
| OEM-A-13 | Ignition coil 4 (IGPLS4) | ignition_out | EMUBLACK-Black-14 | Ignition coil #4 | ignition_out | single_source | |
| OEM-A-14 | Ignition coil 3 (IGPLS3) | ignition_out | EMUBLACK-Grey-9 | Ignition coil #3 | ignition_out | single_source | |
| OEM-A-15 | Ignition coil 2 (IGPLS2) | ignition_out | EMUBLACK-Grey-16 | Ignition coil #2 | ignition_out | single_source | |
| OEM-A-16 | Ignition coil 1 (IGPLS1) | ignition_out | EMUBLACK-Grey-8 | Ignition coil #1 | ignition_out | single_source | |
| OEM-A-18 | Neutral position switch (NC) | digital_in | EMUBLACK-Black-10 | Switch #1 In | digital_in | single_source | |
| OEM-A-19 | Camshaft position A (CMP A) | trigger_in | EMUBLACK-Black-21 | Camsync In #1 | trigger_in | single_source | |
| OEM-A-2 | Ignition power 2 (IGP2) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-A-20 | Sensor 5V supply 2 (VCC2) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-A-21 | Sensor 5V supply 1 (VCC1) | vref | EMUBLACK-Black-34 | +5V supply | vref | single_source | |
| OEM-A-23 | Sensor ground 2 (SG2) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A-24 | Sensor ground 1 (SG1) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A-28 | A/F sensor - (AFS-, wideband Vs) | wb_vs | EMUBLACK-Black-6 | WBO Vs | wb_vs | single_source | |
| OEM-A-29 | Throttle position sensor (TPS) | analog_in | EMUBLACK-Black-18 | TPS In | analog_in | single_source | |
| OEM-A-3 | Ignition power 1 (IGP1) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-A-30 | Manifold absolute pressure (MAP) | analog_in | EMUBLACK-Black-31 | Analog In #1 | analog_in | single_source | |
| OEM-A-31 | A/F sensor + (AFS+, wideband Ip) | wb_ip | EMUBLACK-Black-19 | WBO Ip | wb_ip | single_source | |
| OEM-A-4 | Power ground 2 (PG2) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A-5 | Power ground 1 (PG1) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A-6 | Camshaft position B (CMP B) | trigger_in | EMUBLACK-Black-7 | Camsync In #2 | trigger_in | single_source | |
| OEM-A-7 | Crank position sensor (CKP) | trigger_in | EMUBLACK-Black-8 | Primary trigger | trigger_in | single_source | |
| OEM-A-8 | Logic ground 2 (LG2) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A-9 | Logic ground 1 (LG1) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-B-1 | VTC oil control solenoid (+) | low_side_out | EMUBLACK-Grey-10 | H-Bridge #1 Winding B | hbridge_out | single_source | |
| OEM-B-10 | Alternator L signal (ALTL) | digital_in | EMUBLACK-Black-23 | Switch #2 In | digital_in | single_source | |
| OEM-B-11 | VTEC oil pressure switch (VTPSW) | digital_in | EMUBLACK-Black-36 | Switch #3 In | digital_in | single_source | |
| OEM-B-13 | Alternator FR signal (ALTF) | analog_in | EMUBLACK-Black-17 | Analog In #3 | analog_in | single_source | |
| OEM-B-17 | Intake air temp sensor (IAT) | temp_in | EMUBLACK-Black-5 | CLT In | temp_in | single_source | |
| OEM-B-18 | Alternator control (ALTC) | low_side_out | EMUBLACK-Grey-2 | H-Bridge #1 Winding A | hbridge_out | single_source | |
| OEM-B-2 | Injector 4 (INJ4) | injector_out | EMUBLACK-Grey-6 | Injector #4 | injector_out | single_source | |
| OEM-B-21 | Evap canister purge valve (PCS) | low_side_out | EMUBLACK-Grey-11 | H-Bridge #2 Winding B | hbridge_out | single_source | |
| OEM-B-3 | Injector 3 (INJ3) | injector_out | EMUBLACK-Grey-23 | Injector #3 | injector_out | single_source | |
| OEM-B-4 | Injector 2 (INJ2) | injector_out | EMUBLACK-Grey-15 | Injector #2 | injector_out | single_source | |
| OEM-B-5 | Injector 1 (INJ1) | injector_out | EMUBLACK-Grey-7 | Injector #1 | injector_out | single_source | |
| OEM-B-6 | VTEC solenoid (VTS) | low_side_out | EMUBLACK-Grey-22 | Injector #6 | injector_out | single_source | |
| OEM-B-8 | Coolant temp sensor (ECT) | temp_in | EMUBLACK-Black-32 | IAT In | temp_in | single_source | |
| OEM-E-10 | Ignition switch signal (IG1) | digital_in | EMUBLACK-Grey-18 | Ignition +12V | digital_in | single_source | |
| OEM-E-12 | Radiator fan control (FANC) | low_side_out | EMUBLACK-Grey-13 | AUX 2 / Injector #8 | low_side_out | single_source | |
| OEM-E-13 | Multiplex communication (SEFMJ) | serial | — | — | — | single_source | |
| OEM-E-14 | Fuel tank pressure sensor (FTP) | analog_in | EMUBLACK-Black-9 | Flex Fuel In | analog_in | single_source | |
| OEM-E-15 | Electrical load detector (ELD) | analog_in | EMUBLACK-Black-30 | Analog In #4 | analog_in | single_source | |
| OEM-E-16 | Power steering pressure switch (PSPSW) | digital_in | EMUBLACK-Black-20 | VSS In | digital_in | single_source | |
| OEM-E-17 | Immobilizer fuel pump relay (IMO FPR) | low_side_out | EMUBLACK-Grey-5 | AUX 3 | low_side_out | single_source | |
| OEM-E-18 | A/C clutch relay (ACC) | low_side_out | EMUBLACK-Grey-20 | AUX 4 / Tacho | low_side_out | single_source | |
| OEM-E-19 | Evap vent shut valve (VSV) | low_side_out | EMUBLACK-Grey-3 | H-Bridge #2 Winding A | hbridge_out | single_source | |
| OEM-E-20 | Secondary heated O2 sensor (SHO2S) | lambda_nb_in | EMUBLACK-Black-4 | Analog In #2 | analog_in | single_source | |
| OEM-E-21 | Secondary O2 heater control (SO2SHTC) | low_side_out | EMUBLACK-Grey-19 | WBO Heater | low_side_out | single_source | |
| OEM-E-22 | Brake switch (BKSW) | digital_in | EMUBLACK-Black-35 | Analog In #5 | analog_in | single_source | |
| OEM-E-23 | K-line (diagnostic) | serial | — | — | — | single_source | |
| OEM-E-25 | Engine speed pulse / tacho (NEP) | tacho_out | — | — | — | single_source | |
| OEM-E-26 | Vehicle speed output (VSSOUT) | tacho_out | — | — | — | single_source | |
| OEM-E-27 | Immobilizer code (IMOCD) | — | — | — | — | single_source | |
| OEM-E-29 | Service check signal (SCS) | — | — | — | — | single_source | |
| OEM-E-3 | Reverse lockout solenoid (RVS, Type-S) | low_side_out | — | — | — | single_source | |
| OEM-E-30 | Write enable signal (WEN) | — | — | — | — | single_source | |
| OEM-E-31 | Malfunction indicator lamp (MIL) | low_side_out | — | — | — | single_source | |
| OEM-E-4 | Logic ground 3 (LG3) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-E-5 | Sensor ground 3 (SG3) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-E-6 | Sensor 5V supply 3 (VCC3) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-E-8 | Main relay control (MRLY) | low_side_out | EMUBLACK-Grey-21 | AUX 1 / Injector #7 | low_side_out | single_source | |
| OEM-E-9 | A/F sensor heater relay control (AFSHTCR) | low_side_out | EMUBLACK-Grey-12 | AUX 5 | low_side_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-2 | SP-14V-1 | 0.85 | no route | Ignition power 2 (IGP2) | — | |
| W2 | OEM-A-3 | SP-14V-1 | 0.85 | no route | Ignition power 1 (IGP1) | — | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | no route | Battery +12V | — | |
| W4 | OEM-A-4 | SP-GND-1 | 0.85 | no route | Power ground 2 (PG2) | — | |
| W5 | OEM-A-5 | SP-GND-1 | 0.85 | no route | Power ground 1 (PG1) | — | |
| W6 | OEM-A-8 | SP-GND-1 | 0.85 | no route | Logic ground 2 (LG2) | — | |
| W7 | OEM-A-9 | SP-GND-1 | 0.85 | no route | Logic ground 1 (LG1) | — | |
| W8 | OEM-E-4 | SP-GND-1 | 0.85 | no route | Logic ground 3 (LG3) | — | |
| W9 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | no route | Power Ground | — | |
| W10 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | no route | Ecu Ground | — | |
| W11 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | no route | Power Ground | — | |
| W12 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | no route | Power Ground | — | |
| W13 | OEM-A-23 | SP-0V-1 | 0.5 | no route | Sensor ground 2 (SG2) | — | |
| W14 | OEM-A-24 | SP-0V-1 | 0.5 | no route | Sensor ground 1 (SG1) | — | |
| W15 | OEM-E-5 | SP-0V-1 | 0.5 | no route | Sensor ground 3 (SG3) | — | |
| W16 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | no route | Sensor Ground | — | |
| W17 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | no route | Sensor Ground | — | |
| W18 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | no route | Sensor Ground | — | |
| W19 | OEM-A-20 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply 2 (VCC2) | — | |
| W20 | OEM-E-6 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply 3 (VCC3) | — | |
| W21 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | no route | +5V supply | — | |
| W22 | OEM-A-21 | EMUBLACK-Black-34 | 0.5 | no route | Sensor 5V supply 1 (VCC1) | — | |
| W23 | OEM-A-7 | EMUBLACK-Black-8 | 0.5 | no route | Crank position sensor (CKP) | — | |
| W24 | OEM-A-19 | EMUBLACK-Black-21 | 0.5 | no route | Camshaft position A (CMP A) | — | |
| W25 | OEM-A-6 | EMUBLACK-Black-7 | 0.5 | no route | Camshaft position B (CMP B) | — | |
| W26 | OEM-A-1 | EMUBLACK-Black-3 | 0.5 | no route | Knock sensor (KS) | — | |
| W27 | OEM-A-16 | EMUBLACK-Grey-8 | 0.5 | no route | Ignition coil 1 (IGPLS1) | — | |
| W28 | OEM-A-15 | EMUBLACK-Grey-16 | 0.5 | no route | Ignition coil 2 (IGPLS2) | — | |
| W29 | OEM-A-14 | EMUBLACK-Grey-9 | 0.5 | no route | Ignition coil 3 (IGPLS3) | — | |
| W30 | OEM-A-13 | EMUBLACK-Black-14 | 0.5 | no route | Ignition coil 4 (IGPLS4) | — | |
| W31 | OEM-B-5 | EMUBLACK-Grey-7 | 0.5 | no route | Injector 1 (INJ1) | — | |
| W32 | OEM-B-4 | EMUBLACK-Grey-15 | 0.5 | no route | Injector 2 (INJ2) | — | |
| W33 | OEM-B-3 | EMUBLACK-Grey-23 | 0.5 | no route | Injector 3 (INJ3) | — | |
| W34 | OEM-B-2 | EMUBLACK-Grey-6 | 0.5 | no route | Injector 4 (INJ4) | — | |
| W35 | OEM-E-10 | EMUBLACK-Grey-18 | 0.5 | no route | Ignition switch signal (IG1) | — | |
| W36 | OEM-E-8 | EMUBLACK-Grey-21 | 0.5 | no route | Main relay control (MRLY) | — | |
| W37 | OEM-E-12 | EMUBLACK-Grey-13 | 0.5 | no route | Radiator fan control (FANC) | — | |
| W38 | OEM-E-17 | EMUBLACK-Grey-5 | 0.5 | no route | Immobilizer fuel pump relay (IMO FPR) | — | |
| W39 | OEM-E-18 | EMUBLACK-Grey-20 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W40 | OEM-E-9 | EMUBLACK-Grey-12 | 0.5 | no route | A/F sensor heater relay control (AFSHTCR) | — | |
| W41 | OEM-E-21 | EMUBLACK-Grey-19 | 0.5 | no route | Secondary O2 heater control (SO2SHTC) | — | |
| W42 | OEM-A-10 | EMUBLACK-Grey-4 | 0.5 | no route | A/F sensor heater control (AFSHTC) | — | |
| W43 | OEM-A-12 | EMUBLACK-Grey-14 | 0.5 | no route | Idle air control valve (IACV) | — | |
| W44 | OEM-B-6 | EMUBLACK-Grey-22 | 0.5 | no route | VTEC solenoid (VTS) | — | |
| W45 | OEM-B-1 | EMUBLACK-Grey-10 | 0.5 | no route | VTC oil control solenoid (+) | — | |
| W46 | OEM-B-18 | EMUBLACK-Grey-2 | 0.5 | no route | Alternator control (ALTC) | — | |
| W47 | OEM-B-21 | EMUBLACK-Grey-11 | 0.5 | no route | Evap canister purge valve (PCS) | — | |
| W48 | OEM-E-19 | EMUBLACK-Grey-3 | 0.5 | no route | Evap vent shut valve (VSV) | — | |
| W49 | OEM-A-31 | EMUBLACK-Black-19 | 0.5 | no route | A/F sensor + (AFS+, wideband Ip) | — | |
| W50 | OEM-A-28 | EMUBLACK-Black-6 | 0.5 | no route | A/F sensor - (AFS-, wideband Vs) | — | |
| W51 | OEM-A-30 | EMUBLACK-Black-31 | 0.5 | no route | Manifold absolute pressure (MAP) | — | |
| W52 | OEM-A-29 | EMUBLACK-Black-18 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W53 | OEM-E-20 | EMUBLACK-Black-4 | 0.5 | no route | Secondary heated O2 sensor (SHO2S) | — | |
| W54 | OEM-B-8 | EMUBLACK-Black-32 | 0.5 | no route | Coolant temp sensor (ECT) | — | |
| W55 | OEM-B-17 | EMUBLACK-Black-5 | 0.5 | no route | Intake air temp sensor (IAT) | — | |
| W56 | OEM-B-13 | EMUBLACK-Black-17 | 0.5 | no route | Alternator FR signal (ALTF) | — | |
| W57 | OEM-E-14 | EMUBLACK-Black-9 | 0.5 | no route | Fuel tank pressure sensor (FTP) | — | |
| W58 | OEM-E-15 | EMUBLACK-Black-30 | 0.5 | no route | Electrical load detector (ELD) | — | |
| W59 | OEM-A-18 | EMUBLACK-Black-10 | 0.5 | no route | Neutral position switch (NC) | — | |
| W60 | OEM-B-10 | EMUBLACK-Black-23 | 0.5 | no route | Alternator L signal (ALTL) | — | |
| W61 | OEM-B-11 | EMUBLACK-Black-36 | 0.5 | no route | VTEC oil pressure switch (VTPSW) | — | |
| W62 | OEM-E-16 | EMUBLACK-Black-20 | 0.5 | no route | Power steering pressure switch (PSPSW) | — | |
| W63 | OEM-E-22 | EMUBLACK-Black-35 | 0.5 | no route | Brake switch (BKSW) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 1318682-6 | TE | K-series ECU harness plug A (040-3 HD plug assy, 31P) | 1.000 | ea |
| connector | 353029-1 | TE | K-series ECU harness plug B (040 H/D-3 plug HSG assy, 24P) | 1.000 | ea |
| connector | 353826-1 | TE | K-series ECU harness plug E (040 HD 31P plug HSG assy-B, 31P) | 1.000 | ea |
| terminal | 316836-1 | TE | Multilock 040 III HD socket, tin, 22–18 AWG (0.3–0.85 mm²) | 54.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (12)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | DATASET_GAP | RSX ECU A | 6 of 31 cavities on RSX ECU A have no pin data (11,17,22,25,26,27). Anything there is invisible to these checks. |
| warn | DATASET_GAP | RSX ECU B | 11 of 24 cavities on RSX ECU B have no pin data (7,9,12,14,15,16,19,20,22,23,24). Anything there is invisible to these checks. |
| warn | DATASET_GAP | RSX ECU E | 6 of 31 cavities on RSX ECU E have no pin data (1,2,7,11,24,28). Anything there is invisible to these checks. |
| warn | NET_FAMILY | OEM-B-1 ↔ EMUBLACK-Grey-10 | OEM-B-1 "VTC oil control solenoid (+)" [low_side_out] is wired to EMUBLACK-Grey-10 "H-Bridge #1 Winding B" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-B-18 ↔ EMUBLACK-Grey-2 | OEM-B-18 "Alternator control (ALTC)" [low_side_out] is wired to EMUBLACK-Grey-2 "H-Bridge #1 Winding A" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-B-21 ↔ EMUBLACK-Grey-11 | OEM-B-21 "Evap canister purge valve (PCS)" [low_side_out] is wired to EMUBLACK-Grey-11 "H-Bridge #2 Winding B" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-E-19 ↔ EMUBLACK-Grey-3 | OEM-E-19 "Evap vent shut valve (VSV)" [low_side_out] is wired to EMUBLACK-Grey-3 "H-Bridge #2 Winding A" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-E-22 ↔ EMUBLACK-Black-35 | OEM-E-22 "Brake switch (BKSW)" [digital_in] is wired to EMUBLACK-Black-35 "Analog In #5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | SUPPLY_GROUP | EMUBLACK-Black-26 + OEM-A-20 + OEM-E-6 + SP-5V1-1 | Supplies meant to stay independent share one net: OEM-A-20 [k_vcc2], OEM-E-6 [k_vcc3]. The new ECU has no free 5 V reference, so they share one: normal on a standalone, but a short on any of these sensors drops them all. |
| info | NET_FAMILY | OEM-A-12 ↔ EMUBLACK-Grey-14 | OEM-A-12 "Idle air control valve (IACV)" [low_side_out] is wired to EMUBLACK-Grey-14 "Injector #5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-6 ↔ EMUBLACK-Grey-22 | OEM-B-6 "VTEC solenoid (VTS)" [low_side_out] is wired to EMUBLACK-Grey-22 "Injector #6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 9 optional OEM pins are not mapped: OEM-E-13 Multiplex communication (SEFMJ); OEM-E-23 K-line (diagnostic); OEM-E-25 Engine speed pulse / tacho (NEP); OEM-E-26 Vehicle speed output (VSSOUT); OEM-E-27 Immobilizer code (IMOCD); OEM-E-29 Service check signal (SCS); OEM-E-3 Reverse lockout solenoid (RVS, Type-S); OEM-E-30 Write enable signal (WEN); OEM-E-31 Malfunction indicator lamp (MIL) |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Not wired: - OEM-E 3: Reverse lockout solenoid (RVS, Type-S): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-E 31: Malfunction indicator lamp (MIL): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-E 25: Engine speed pulse / tacho (NEP): no free tacho/frequency_out/low_side/ls_hs on ECUMASTER EMU Black - OEM-E 26: Vehicle speed output (VSSOUT): no free frequency_out/tacho/low_side/ls_hs on ECUMASTER EMU Black - OEM-E 13: Multiplex communication (SEFMJ): no free k_line on ECUMASTER EMU Black - OEM-E 23: K-line (diagnostic): no free k_line on ECUMASTER EMU Black - OEM-E 27: Immobilizer code (IMOCD): not classified in the library; wire by hand - OEM-E 29: Service check signal (SCS): not classified in the library; wire by hand - OEM-E 30: Write enable signal (WEN): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER EMU Black — pinout (Black 39-pin / Grey 24-pin) | https://www.ecumaster.com/wp/wp-content/uploads/2020/05/EMU_Black_pinout.pdf | archive | 2026-10-05 | 096b2b4df1bd |
| 3 | forum | FFS TechNet: K-series 02-06 RSX ECU pin diagram (Helm) | https://ff-squad.com/technet2/k-series-02-06-rsx-ecu-pin-diagram/ | archive | 2026-10-05 | b2b85002666e |