RSX Type-S 2005-06 (K20Z1) → Emtron Shadow 8 (auto)
RSX Type-S 2005-06 (K20Z1) — Emtron — Shadow 8
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-08
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 2: read the Findings page before cutting any wire |
| Size of the job | 60 wires · 9 connectors · 7 part lines |
| Tools | 715131-1 · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 · 316836-1 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A-3 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | SHADOW8-A-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | SHADOW8-B-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A-8 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-E-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | SHADOW8-A-34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | SHADOW8-A-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-A-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-A-24 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E-5 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-0V-1 | SHADOW8-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | SHADOW8-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A-20 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A-21 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-E-6 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-5V1-1 | SHADOW8-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-A-7 | SHADOW8-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-A-19 | SHADOW8-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-A-1 | SHADOW8-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-A-16 | SHADOW8-B-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-A-15 | SHADOW8-B-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-A-14 | SHADOW8-B-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A-13 | SHADOW8-B-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-B-5 | SHADOW8-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-B-4 | SHADOW8-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-B-3 | SHADOW8-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-B-2 | SHADOW8-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E-10 | SHADOW8-B-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E-8 | SHADOW8-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E-12 | SHADOW8-B-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E-17 | SHADOW8-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E-18 | SHADOW8-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E-9 | SHADOW8-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E-21 | SHADOW8-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-10 | SHADOW8-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A-12 | SHADOW8-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-B-6 | SHADOW8-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-B-1 | SHADOW8-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-B-18 | SHADOW8-B-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-B-21 | SHADOW8-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E-19 | SHADOW8-B-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E-3 | SHADOW8-B-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E-31 | SHADOW8-B-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A-30 | SHADOW8-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A-29 | SHADOW8-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E-20 | SHADOW8-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-B-8 | SHADOW8-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-B-17 | SHADOW8-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-B-13 | SHADOW8-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E-14 | SHADOW8-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E-15 | SHADOW8-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A-18 | SHADOW8-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-B-10 | SHADOW8-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-B-11 | SHADOW8-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E-16 | SHADOW8-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-E-22 | SHADOW8-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | SHADOW8-A-1 | SHADOW8-A-34 | open (OL) | +12 V supply must not touch power ground | |
| 2 | SHADOW8-A-1 | SHADOW8-A-4 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | SHADOW8-A-3 | SHADOW8-A-4 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 4 | SHADOW8-A-1 | SHADOW8-A-3 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 5 | SHADOW8-A-34 | SHADOW8-A-3 | open (OL) | power ground must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Knock sensor (KS) | — | W23 | — | 0.5 | SHADOW8-A-16 | — | — | — |
| 2 | Ignition power 2 (IGP2) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Ignition power 1 (IGP1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Power ground 2 (PG2) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground 1 (PG1) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Camshaft position B (CMP B) | — | — | — | — | — | — | — | — |
| 7 | Crank position sensor (CKP) | — | W21 | — | 0.5 | SHADOW8-A-5 | — | — | — |
| 8 | Logic ground 2 (LG2) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Logic ground 1 (LG1) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | A/F sensor heater control (AFSHTC) | — | W39 | — | 0.5 | SHADOW8-B-16 | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | Idle air control valve (IACV) | — | W40 | — | 0.5 | SHADOW8-B-17 | — | — | — |
| 13 | Ignition coil 4 (IGPLS4) | — | W27 | — | 0.5 | SHADOW8-B-30 | — | — | — |
| 14 | Ignition coil 3 (IGPLS3) | — | W26 | — | 0.5 | SHADOW8-B-29 | — | — | — |
| 15 | Ignition coil 2 (IGPLS2) | — | W25 | — | 0.5 | SHADOW8-B-28 | — | — | — |
| 16 | Ignition coil 1 (IGPLS1) | — | W24 | — | 0.5 | SHADOW8-B-27 | — | — | — |
| 17 | — | — | — | — | — | — | — | — | — |
| 18 | Neutral position switch (NC) | — | W56 | — | 0.5 | SHADOW8-A-26 | — | — | — |
| 19 | Camshaft position A (CMP A) | — | W22 | — | 0.5 | SHADOW8-A-6 | — | — | — |
| 20 | Sensor 5V supply 2 (VCC2) | — | W17 | — | 0.5 | SP-5V1-1 | — | — | — |
| 21 | Sensor 5V supply 1 (VCC1) | — | W18 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | Sensor ground 2 (SG2) | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Sensor ground 1 (SG1) | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 25 | — | — | — | — | — | — | — | — | — |
| 26 | — | — | — | — | — | — | — | — | — |
| 27 | — | — | — | — | — | — | — | — | — |
| 28 | A/F sensor - (AFS-, wideband Vs) | — | — | — | — | — | — | — | — |
| 29 | Throttle position sensor (TPS) | — | W49 | — | 0.5 | SHADOW8-A-11 | — | — | — |
| 30 | Manifold absolute pressure (MAP) | — | W48 | — | 0.5 | SHADOW8-A-10 | — | — | — |
| 31 | A/F sensor + (AFS+, wideband Ip) | — | — | — | — | — | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | VTC oil control solenoid (+) | — | W42 | — | 0.5 | SHADOW8-B-7 | — | — | — |
| 2 | Injector 4 (INJ4) | — | W31 | — | 0.5 | SHADOW8-B-5 | — | — | — |
| 3 | Injector 3 (INJ3) | — | W30 | — | 0.5 | SHADOW8-B-4 | — | — | — |
| 4 | Injector 2 (INJ2) | — | W29 | — | 0.5 | SHADOW8-B-3 | — | — | — |
| 5 | Injector 1 (INJ1) | — | W28 | — | 0.5 | SHADOW8-B-2 | — | — | — |
| 6 | VTEC solenoid (VTS) | — | W41 | — | 0.5 | SHADOW8-B-6 | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | Coolant temp sensor (ECT) | — | W51 | — | 0.5 | SHADOW8-A-13 | — | — | — |
| 9 | — | — | — | — | — | — | — | — | — |
| 10 | Alternator L signal (ALTL) | — | W57 | — | 0.5 | SHADOW8-A-27 | — | — | — |
| 11 | VTEC oil pressure switch (VTPSW) | — | W58 | — | 0.5 | SHADOW8-A-28 | — | — | — |
| 12 | — | — | — | — | — | — | — | — | — |
| 13 | Alternator FR signal (ALTF) | — | W53 | — | 0.5 | SHADOW8-A-18 | — | — | — |
| 14 | — | — | — | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — | — | — | — |
| 16 | — | — | — | — | — | — | — | — | — |
| 17 | Intake air temp sensor (IAT) | — | W52 | — | 0.5 | SHADOW8-A-14 | — | — | — |
| 18 | Alternator control (ALTC) | — | W43 | — | 0.5 | SHADOW8-B-8 | — | — | — |
| 19 | — | — | — | — | — | — | — | — | — |
| 20 | — | — | — | — | — | — | — | — | — |
| 21 | Evap canister purge valve (PCS) | — | W44 | — | 0.5 | SHADOW8-B-9 | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | — | — | — | — | — | — | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
OEM-E
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | — | — | — | — | — | — | — |
| 2 | — | — | — | — | — | — | — | — | — |
| 3 | Reverse lockout solenoid (RVS, Type-S) | — | W46 | — | 0.5 | SHADOW8-B-23 | — | — | — |
| 4 | Logic ground 3 (LG3) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Sensor ground 3 (SG3) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor 5V supply 3 (VCC3) | — | W19 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | Main relay control (MRLY) | — | W33 | — | 0.5 | SHADOW8-B-10 | — | — | — |
| 9 | A/F sensor heater relay control (AFSHTCR) | — | W37 | — | 0.5 | SHADOW8-B-14 | — | — | — |
| 10 | Ignition switch signal (IG1) | — | W32 | — | 0.5 | SHADOW8-B-21 | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | Radiator fan control (FANC) | — | W34 | — | 0.5 | SHADOW8-B-11 | — | — | — |
| 13 | Multiplex communication (SEFMJ) | — | — | — | — | — | — | — | — |
| 14 | Fuel tank pressure sensor (FTP) | — | W54 | — | 0.5 | SHADOW8-A-19 | — | — | — |
| 15 | Electrical load detector (ELD) | — | W55 | — | 0.5 | SHADOW8-A-20 | — | — | — |
| 16 | Power steering pressure switch (PSPSW) | — | W59 | — | 0.5 | SHADOW8-A-29 | — | — | — |
| 17 | Immobilizer fuel pump relay (IMO FPR) | — | W35 | — | 0.5 | SHADOW8-B-12 | — | — | — |
| 18 | A/C clutch relay (ACC) | — | W36 | — | 0.5 | SHADOW8-B-13 | — | — | — |
| 19 | Evap vent shut valve (VSV) | — | W45 | — | 0.5 | SHADOW8-B-22 | — | — | — |
| 20 | Secondary heated O2 sensor (SHO2S) | — | W50 | — | 0.5 | SHADOW8-A-12 | — | — | — |
| 21 | Secondary O2 heater control (SO2SHTC) | — | W38 | — | 0.5 | SHADOW8-B-15 | — | — | — |
| 22 | Brake switch (BKSW) | — | W60 | — | 0.5 | SHADOW8-A-30 | — | — | — |
| 23 | K-line (diagnostic) | — | — | — | — | — | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
| 25 | Engine speed pulse / tacho (NEP) | — | — | — | — | — | — | — | — |
| 26 | Vehicle speed output (VSSOUT) | — | — | — | — | — | — | — | — |
| 27 | Immobilizer code (IMOCD) | — | — | — | — | — | — | — | — |
| 28 | — | — | — | — | — | — | — | — | — |
| 29 | Service check signal (SCS) | — | — | — | — | — | — | — | — |
| 30 | Write enable signal (WEN) | — | — | — | — | — | — | — | — |
| 31 | Malfunction indicator lamp (MIL) | — | W47 | — | 0.5 | SHADOW8-B-24 | — | — | — |
SHADOW8-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | 8.0V sensor supply | — | — | — | — | — | — | — | — |
| 3 | 5.0V sensor supply | — | W20 | — | 0.5 | SP-5V1-1 | — | — | — |
| 4 | 0V analog reference | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Crank position sensor | — | W21 | — | 0.5 | OEM-A-7 | — | — | — |
| 6 | Sync position sensor | — | W22 | — | 0.5 | OEM-A-19 | — | — | — |
| 7 | Trigger ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Shield | — | — | — | — | — | — | — | — |
| 9 | Ground 1 | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | Analog voltage 1 | — | W48 | — | 0.5 | OEM-A-30 | — | — | — |
| 11 | Analog voltage 2 | — | W49 | — | 0.5 | OEM-A-29 | — | — | — |
| 12 | Analog voltage 3 | — | W50 | — | 0.5 | OEM-E-20 | — | — | — |
| 13 | Analog voltage 4 | — | W51 | — | 0.5 | OEM-B-8 | — | — | — |
| 14 | Analog voltage 5 | — | W52 | — | 0.5 | OEM-B-17 | — | — | — |
| 15 | CAN bus 1 high | — | — | — | — | — | — | — | — |
| 16 | Knock 1 + | — | W23 | — | 0.5 | OEM-A-1 | — | — | — |
| 17 | Knock 1 − | — | — | — | — | — | — | — | — |
| 18 | Analog voltage 6 | — | W53 | — | 0.5 | OEM-B-13 | — | — | — |
| 19 | Analog voltage 7 (switchable 1k pull-up) | — | W54 | — | 0.5 | OEM-E-14 | — | — | — |
| 20 | Analog voltage 8 (switchable 1k pull-up) | — | W55 | — | 0.5 | OEM-E-15 | — | — | — |
| 21 | Analog voltage 9 (switchable 1k pull-up) | — | — | — | — | — | — | — | — |
| 22 | Analog voltage 10 (switchable 1k pull-up) | — | — | — | — | — | — | — | — |
| 23 | CAN bus 1 low | — | — | — | — | — | — | — | — |
| 24 | Knock 2 + | — | — | — | — | — | — | — | — |
| 25 | Knock 2 − | — | — | — | — | — | — | — | — |
| 26 | Digital input 1 | — | W56 | — | 0.5 | OEM-A-18 | — | — | — |
| 27 | Digital input 2 | — | W57 | — | 0.5 | OEM-B-10 | — | — | — |
| 28 | Digital input 3 | — | W58 | — | 0.5 | OEM-B-11 | — | — | — |
| 29 | Digital input 4 | — | W59 | — | 0.5 | OEM-E-16 | — | — | — |
| 30 | Digital input 5 | — | W60 | — | 0.5 | OEM-E-22 | — | — | — |
| 31 | Digital input 6 | — | — | — | — | — | — | — | — |
| 32 | CAN bus 2 high | — | — | — | — | — | — | — | — |
| 33 | CAN bus 2 low | — | — | — | — | — | — | — | — |
| 34 | Ground 2 | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
SHADOW8-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (HOT) supply | — | — | — | — | — | — | — | — |
| 2 | Injector cylinder 1 | — | W28 | — | 0.5 | OEM-B-5 | — | — | — |
| 3 | Injector cylinder 2 | — | W29 | — | 0.5 | OEM-B-4 | — | — | — |
| 4 | Injector cylinder 3 | — | W30 | — | 0.5 | OEM-B-3 | — | — | — |
| 5 | Injector cylinder 4 | — | W31 | — | 0.5 | OEM-B-2 | — | — | — |
| 6 | Injector cylinder 5 | — | W41 | — | 0.5 | OEM-B-6 | — | — | — |
| 7 | Injector cylinder 6 | — | W42 | — | 0.5 | OEM-B-1 | — | — | — |
| 8 | Injector cylinder 7 | — | W43 | — | 0.5 | OEM-B-18 | — | — | — |
| 9 | Injector cylinder 8 | — | W44 | — | 0.5 | OEM-B-21 | — | — | — |
| 10 | Aux output 1 | — | W33 | — | 0.5 | OEM-E-8 | — | — | — |
| 11 | Aux output 2 | — | W34 | — | 0.5 | OEM-E-12 | — | — | — |
| 12 | Aux output 3 | — | W35 | — | 0.5 | OEM-E-17 | — | — | — |
| 13 | Aux output 4 | — | W36 | — | 0.5 | OEM-E-18 | — | — | — |
| 14 | Aux output 5 | — | W37 | — | 0.5 | OEM-E-9 | — | — | — |
| 15 | Aux output 6 | — | W38 | — | 0.5 | OEM-E-21 | — | — | — |
| 16 | Aux output 7 | — | W39 | — | 0.5 | OEM-A-10 | — | — | — |
| 17 | Aux output 8 | — | W40 | — | 0.5 | OEM-A-12 | — | — | — |
| 18 | Digital input 7 | — | — | — | — | — | — | — | — |
| 19 | Digital input 8 | — | — | — | — | — | — | — | — |
| 20 | Digital input 9 | — | — | — | — | — | — | — | — |
| 21 | Digital input 10 / ignition switch | — | W32 | — | 0.5 | OEM-E-10 | — | — | — |
| 22 | Aux output 9 | — | W45 | — | 0.5 | OEM-E-19 | — | — | — |
| 23 | Aux output 10 | — | W46 | — | 0.5 | OEM-E-3 | — | — | — |
| 24 | Aux output 11 | — | W47 | — | 0.5 | OEM-E-31 | — | — | — |
| 25 | Aux output 12 | — | — | — | — | — | — | — | — |
| 26 | Aux 9–12 power supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | Ignition TTL cylinder 1 | — | W24 | — | 0.5 | OEM-A-16 | — | — | — |
| 28 | Ignition TTL cylinder 2 | — | W25 | — | 0.5 | OEM-A-15 | — | — | — |
| 29 | Ignition TTL cylinder 3 | — | W26 | — | 0.5 | OEM-A-14 | — | — | — |
| 30 | Ignition TTL cylinder 4 | — | W27 | — | 0.5 | OEM-A-13 | — | — | — |
| 31 | Ignition TTL cylinder 5 | — | — | — | — | — | — | — | — |
| 32 | Ignition TTL cylinder 6 | — | — | — | — | — | — | — | — |
| 33 | Ignition TTL cylinder 7 | — | — | — | — | — | — | — | — |
| 34 | Ignition TTL cylinder 8 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W12 | — | 0.5 | OEM-A-23 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-A-24 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-E-5 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | SHADOW8-A-4 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | SHADOW8-A-7 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-2 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A-3 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | SHADOW8-A-1 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | SHADOW8-B-26 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W17 | — | 0.5 | OEM-A-20 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-A-21 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-E-6 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | SHADOW8-A-3 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-A-4 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A-5 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A-8 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-A-9 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-E-4 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | SHADOW8-A-34 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | SHADOW8-A-9 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Knock sensor (KS) | knock_in | SHADOW8-A-16 | Knock 1 + | knock_in | single_source | |
| OEM-A-10 | A/F sensor heater control (AFSHTC) | low_side_out | SHADOW8-B-16 | Aux output 7 | switch_out | single_source | |
| OEM-A-12 | Idle air control valve (IACV) | low_side_out | SHADOW8-B-17 | Aux output 8 | switch_out | single_source | |
| OEM-A-13 | Ignition coil 4 (IGPLS4) | ignition_out | SHADOW8-B-30 | Ignition TTL cylinder 4 | ignition_out | single_source | |
| OEM-A-14 | Ignition coil 3 (IGPLS3) | ignition_out | SHADOW8-B-29 | Ignition TTL cylinder 3 | ignition_out | single_source | |
| OEM-A-15 | Ignition coil 2 (IGPLS2) | ignition_out | SHADOW8-B-28 | Ignition TTL cylinder 2 | ignition_out | single_source | |
| OEM-A-16 | Ignition coil 1 (IGPLS1) | ignition_out | SHADOW8-B-27 | Ignition TTL cylinder 1 | ignition_out | single_source | |
| OEM-A-18 | Neutral position switch (NC) | digital_in | SHADOW8-A-26 | Digital input 1 | digital_in | single_source | |
| OEM-A-19 | Camshaft position A (CMP A) | trigger_in | SHADOW8-A-6 | Sync position sensor | trigger_in | single_source | |
| OEM-A-2 | Ignition power 2 (IGP2) | power_in | SHADOW8-A-1 + SHADOW8-B-26 | ECU supply + Aux 9–12 power supply | power_in | single_source | |
| OEM-A-20 | Sensor 5V supply 2 (VCC2) | vref | SHADOW8-A-3 | 5.0V sensor supply | vref | single_source | |
| OEM-A-21 | Sensor 5V supply 1 (VCC1) | vref | SHADOW8-A-3 | 5.0V sensor supply | vref | single_source | |
| OEM-A-23 | Sensor ground 2 (SG2) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-A-24 | Sensor ground 1 (SG1) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-A-28 | A/F sensor - (AFS-, wideband Vs) | wb_vs | — | — | — | single_source | |
| OEM-A-29 | Throttle position sensor (TPS) | analog_in | SHADOW8-A-11 | Analog voltage 2 | analog_in | single_source | |
| OEM-A-3 | Ignition power 1 (IGP1) | power_in | SHADOW8-A-1 + SHADOW8-B-26 | ECU supply + Aux 9–12 power supply | power_in | single_source | |
| OEM-A-30 | Manifold absolute pressure (MAP) | analog_in | SHADOW8-A-10 | Analog voltage 1 | analog_in | single_source | |
| OEM-A-31 | A/F sensor + (AFS+, wideband Ip) | wb_ip | — | — | — | single_source | |
| OEM-A-4 | Power ground 2 (PG2) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A-5 | Power ground 1 (PG1) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A-6 | Camshaft position B (CMP B) | trigger_in | — | — | — | single_source | |
| OEM-A-7 | Crank position sensor (CKP) | trigger_in | SHADOW8-A-5 | Crank position sensor | trigger_in | single_source | |
| OEM-A-8 | Logic ground 2 (LG2) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A-9 | Logic ground 1 (LG1) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-B-1 | VTC oil control solenoid (+) | low_side_out | SHADOW8-B-7 | Injector cylinder 6 | injector_out | single_source | |
| OEM-B-10 | Alternator L signal (ALTL) | digital_in | SHADOW8-A-27 | Digital input 2 | digital_in | single_source | |
| OEM-B-11 | VTEC oil pressure switch (VTPSW) | digital_in | SHADOW8-A-28 | Digital input 3 | digital_in | single_source | |
| OEM-B-13 | Alternator FR signal (ALTF) | analog_in | SHADOW8-A-18 | Analog voltage 6 | analog_in | single_source | |
| OEM-B-17 | Intake air temp sensor (IAT) | temp_in | SHADOW8-A-14 | Analog voltage 5 | analog_in | single_source | |
| OEM-B-18 | Alternator control (ALTC) | low_side_out | SHADOW8-B-8 | Injector cylinder 7 | injector_out | single_source | |
| OEM-B-2 | Injector 4 (INJ4) | injector_out | SHADOW8-B-5 | Injector cylinder 4 | injector_out | single_source | |
| OEM-B-21 | Evap canister purge valve (PCS) | low_side_out | SHADOW8-B-9 | Injector cylinder 8 | injector_out | single_source | |
| OEM-B-3 | Injector 3 (INJ3) | injector_out | SHADOW8-B-4 | Injector cylinder 3 | injector_out | single_source | |
| OEM-B-4 | Injector 2 (INJ2) | injector_out | SHADOW8-B-3 | Injector cylinder 2 | injector_out | single_source | |
| OEM-B-5 | Injector 1 (INJ1) | injector_out | SHADOW8-B-2 | Injector cylinder 1 | injector_out | single_source | |
| OEM-B-6 | VTEC solenoid (VTS) | low_side_out | SHADOW8-B-6 | Injector cylinder 5 | injector_out | single_source | |
| OEM-B-8 | Coolant temp sensor (ECT) | temp_in | SHADOW8-A-13 | Analog voltage 4 | analog_in | single_source | |
| OEM-E-10 | Ignition switch signal (IG1) | digital_in | SHADOW8-B-21 | Digital input 10 / ignition switch | digital_in | single_source | |
| OEM-E-12 | Radiator fan control (FANC) | low_side_out | SHADOW8-B-11 | Aux output 2 | low_side_out | single_source | |
| OEM-E-13 | Multiplex communication (SEFMJ) | serial | — | — | — | single_source | |
| OEM-E-14 | Fuel tank pressure sensor (FTP) | analog_in | SHADOW8-A-19 | Analog voltage 7 (switchable 1k pull-up) | analog_in | single_source | |
| OEM-E-15 | Electrical load detector (ELD) | analog_in | SHADOW8-A-20 | Analog voltage 8 (switchable 1k pull-up) | analog_in | single_source | |
| OEM-E-16 | Power steering pressure switch (PSPSW) | digital_in | SHADOW8-A-29 | Digital input 4 | digital_in | single_source | |
| OEM-E-17 | Immobilizer fuel pump relay (IMO FPR) | low_side_out | SHADOW8-B-12 | Aux output 3 | low_side_out | single_source | |
| OEM-E-18 | A/C clutch relay (ACC) | low_side_out | SHADOW8-B-13 | Aux output 4 | low_side_out | single_source | |
| OEM-E-19 | Evap vent shut valve (VSV) | low_side_out | SHADOW8-B-22 | Aux output 9 | hbridge_out | single_source | |
| OEM-E-20 | Secondary heated O2 sensor (SHO2S) | lambda_nb_in | SHADOW8-A-12 | Analog voltage 3 | analog_in | single_source | |
| OEM-E-21 | Secondary O2 heater control (SO2SHTC) | low_side_out | SHADOW8-B-15 | Aux output 6 | switch_out | single_source | |
| OEM-E-22 | Brake switch (BKSW) | digital_in | SHADOW8-A-30 | Digital input 5 | digital_in | single_source | |
| OEM-E-23 | K-line (diagnostic) | serial | — | — | — | single_source | |
| OEM-E-25 | Engine speed pulse / tacho (NEP) | tacho_out | — | — | — | single_source | |
| OEM-E-26 | Vehicle speed output (VSSOUT) | tacho_out | — | — | — | single_source | |
| OEM-E-27 | Immobilizer code (IMOCD) | — | — | — | — | single_source | |
| OEM-E-29 | Service check signal (SCS) | — | — | — | — | single_source | |
| OEM-E-3 | Reverse lockout solenoid (RVS, Type-S) | low_side_out | SHADOW8-B-23 | Aux output 10 | hbridge_out | single_source | |
| OEM-E-30 | Write enable signal (WEN) | — | — | — | — | single_source | |
| OEM-E-31 | Malfunction indicator lamp (MIL) | low_side_out | SHADOW8-B-24 | Aux output 11 | hbridge_out | single_source | |
| OEM-E-4 | Logic ground 3 (LG3) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-E-5 | Sensor ground 3 (SG3) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-E-6 | Sensor 5V supply 3 (VCC3) | vref | SHADOW8-A-3 | 5.0V sensor supply | vref | single_source | |
| OEM-E-8 | Main relay control (MRLY) | low_side_out | SHADOW8-B-10 | Aux output 1 | low_side_out | single_source | |
| OEM-E-9 | A/F sensor heater relay control (AFSHTCR) | low_side_out | SHADOW8-B-14 | Aux output 5 | switch_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-2 | SP-14V-1 | 0.85 | no route | Ignition power 2 (IGP2) | — | |
| W2 | OEM-A-3 | SP-14V-1 | 0.85 | no route | Ignition power 1 (IGP1) | — | |
| W3 | SP-14V-1 | SHADOW8-A-1 | 0.85 | no route | ECU supply | — | |
| W4 | SP-14V-1 | SHADOW8-B-26 | 0.85 | no route | Aux 9–12 power supply | — | |
| W5 | OEM-A-4 | SP-GND-1 | 0.85 | no route | Power ground 2 (PG2) | — | |
| W6 | OEM-A-5 | SP-GND-1 | 0.85 | no route | Power ground 1 (PG1) | — | |
| W7 | OEM-A-8 | SP-GND-1 | 0.85 | no route | Logic ground 2 (LG2) | — | |
| W8 | OEM-A-9 | SP-GND-1 | 0.85 | no route | Logic ground 1 (LG1) | — | |
| W9 | OEM-E-4 | SP-GND-1 | 0.85 | no route | Logic ground 3 (LG3) | — | |
| W10 | SP-GND-1 | SHADOW8-A-34 | 0.85 | no route | Ground 2 | — | |
| W11 | SP-GND-1 | SHADOW8-A-9 | 0.85 | no route | Ground 1 | — | |
| W12 | OEM-A-23 | SP-0V-1 | 0.5 | no route | Sensor ground 2 (SG2) | — | |
| W13 | OEM-A-24 | SP-0V-1 | 0.5 | no route | Sensor ground 1 (SG1) | — | |
| W14 | OEM-E-5 | SP-0V-1 | 0.5 | no route | Sensor ground 3 (SG3) | — | |
| W15 | SP-0V-1 | SHADOW8-A-4 | 0.5 | no route | 0V analog reference | — | |
| W16 | SP-0V-1 | SHADOW8-A-7 | 0.5 | no route | Trigger ground | — | |
| W17 | OEM-A-20 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply 2 (VCC2) | — | |
| W18 | OEM-A-21 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply 1 (VCC1) | — | |
| W19 | OEM-E-6 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply 3 (VCC3) | — | |
| W20 | SP-5V1-1 | SHADOW8-A-3 | 0.5 | no route | 5.0V sensor supply | — | |
| W21 | OEM-A-7 | SHADOW8-A-5 | 0.5 | no route | Crank position sensor (CKP) | — | |
| W22 | OEM-A-19 | SHADOW8-A-6 | 0.5 | no route | Camshaft position A (CMP A) | — | |
| W23 | OEM-A-1 | SHADOW8-A-16 | 0.5 | no route | Knock sensor (KS) | — | |
| W24 | OEM-A-16 | SHADOW8-B-27 | 0.5 | no route | Ignition coil 1 (IGPLS1) | — | |
| W25 | OEM-A-15 | SHADOW8-B-28 | 0.5 | no route | Ignition coil 2 (IGPLS2) | — | |
| W26 | OEM-A-14 | SHADOW8-B-29 | 0.5 | no route | Ignition coil 3 (IGPLS3) | — | |
| W27 | OEM-A-13 | SHADOW8-B-30 | 0.5 | no route | Ignition coil 4 (IGPLS4) | — | |
| W28 | OEM-B-5 | SHADOW8-B-2 | 0.5 | no route | Injector 1 (INJ1) | — | |
| W29 | OEM-B-4 | SHADOW8-B-3 | 0.5 | no route | Injector 2 (INJ2) | — | |
| W30 | OEM-B-3 | SHADOW8-B-4 | 0.5 | no route | Injector 3 (INJ3) | — | |
| W31 | OEM-B-2 | SHADOW8-B-5 | 0.5 | no route | Injector 4 (INJ4) | — | |
| W32 | OEM-E-10 | SHADOW8-B-21 | 0.5 | no route | Ignition switch signal (IG1) | — | |
| W33 | OEM-E-8 | SHADOW8-B-10 | 0.5 | no route | Main relay control (MRLY) | — | |
| W34 | OEM-E-12 | SHADOW8-B-11 | 0.5 | no route | Radiator fan control (FANC) | — | |
| W35 | OEM-E-17 | SHADOW8-B-12 | 0.5 | no route | Immobilizer fuel pump relay (IMO FPR) | — | |
| W36 | OEM-E-18 | SHADOW8-B-13 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W37 | OEM-E-9 | SHADOW8-B-14 | 0.5 | no route | A/F sensor heater relay control (AFSHTCR) | — | |
| W38 | OEM-E-21 | SHADOW8-B-15 | 0.5 | no route | Secondary O2 heater control (SO2SHTC) | — | |
| W39 | OEM-A-10 | SHADOW8-B-16 | 0.5 | no route | A/F sensor heater control (AFSHTC) | — | |
| W40 | OEM-A-12 | SHADOW8-B-17 | 0.5 | no route | Idle air control valve (IACV) | — | |
| W41 | OEM-B-6 | SHADOW8-B-6 | 0.5 | no route | VTEC solenoid (VTS) | — | |
| W42 | OEM-B-1 | SHADOW8-B-7 | 0.5 | no route | VTC oil control solenoid (+) | — | |
| W43 | OEM-B-18 | SHADOW8-B-8 | 0.5 | no route | Alternator control (ALTC) | — | |
| W44 | OEM-B-21 | SHADOW8-B-9 | 0.5 | no route | Evap canister purge valve (PCS) | — | |
| W45 | OEM-E-19 | SHADOW8-B-22 | 0.5 | no route | Evap vent shut valve (VSV) | — | |
| W46 | OEM-E-3 | SHADOW8-B-23 | 0.5 | no route | Reverse lockout solenoid (RVS, Type-S) | — | |
| W47 | OEM-E-31 | SHADOW8-B-24 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W48 | OEM-A-30 | SHADOW8-A-10 | 0.5 | no route | Manifold absolute pressure (MAP) | — | |
| W49 | OEM-A-29 | SHADOW8-A-11 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W50 | OEM-E-20 | SHADOW8-A-12 | 0.5 | no route | Secondary heated O2 sensor (SHO2S) | — | |
| W51 | OEM-B-8 | SHADOW8-A-13 | 0.5 | no route | Coolant temp sensor (ECT) | — | |
| W52 | OEM-B-17 | SHADOW8-A-14 | 0.5 | no route | Intake air temp sensor (IAT) | — | |
| W53 | OEM-B-13 | SHADOW8-A-18 | 0.5 | no route | Alternator FR signal (ALTF) | — | |
| W54 | OEM-E-14 | SHADOW8-A-19 | 0.5 | no route | Fuel tank pressure sensor (FTP) | — | |
| W55 | OEM-E-15 | SHADOW8-A-20 | 0.5 | no route | Electrical load detector (ELD) | — | |
| W56 | OEM-A-18 | SHADOW8-A-26 | 0.5 | no route | Neutral position switch (NC) | — | |
| W57 | OEM-B-10 | SHADOW8-A-27 | 0.5 | no route | Alternator L signal (ALTL) | — | |
| W58 | OEM-B-11 | SHADOW8-A-28 | 0.5 | no route | VTEC oil pressure switch (VTPSW) | — | |
| W59 | OEM-E-16 | SHADOW8-A-29 | 0.5 | no route | Power steering pressure switch (PSPSW) | — | |
| W60 | OEM-E-22 | SHADOW8-A-30 | 0.5 | no route | Brake switch (BKSW) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 1318682-6 | TE | K-series ECU harness plug A (040-3 HD plug assy, 31P) | 1.000 | ea |
| connector | 353029-1 | TE | K-series ECU harness plug B (040 H/D-3 plug HSG assy, 24P) | 1.000 | ea |
| connector | 353826-1 | TE | K-series ECU harness plug E (040 HD 31P plug HSG assy-B, 31P) | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 47.000 | ea |
| terminal | 316836-1 | TE | Multilock 040 III HD socket, tin, 22–18 AWG (0.3–0.85 mm²) | 53.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (20)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | PHYS_REQUIRED_OPEN | SHADOW8-B-1 | SHADOW8-B-1 "Battery constant (HOT) supply" is required but not wired. |
| error | REQUIRED_UNMAPPED | OEM-A-6 | Required OEM function "Camshaft position B (CMP B)" (trigger_in) is not connected to the new ECU. |
| warn | DATASET_GAP | RSX ECU A | 6 of 31 cavities on RSX ECU A have no pin data (11,17,22,25,26,27). Anything there is invisible to these checks. |
| warn | DATASET_GAP | RSX ECU B | 11 of 24 cavities on RSX ECU B have no pin data (7,9,12,14,15,16,19,20,22,23,24). Anything there is invisible to these checks. |
| warn | DATASET_GAP | RSX ECU E | 6 of 31 cavities on RSX ECU E have no pin data (1,2,7,11,24,28). Anything there is invisible to these checks. |
| warn | NET_FAMILY | OEM-E-19 ↔ SHADOW8-B-22 | OEM-E-19 "Evap vent shut valve (VSV)" [low_side_out] is wired to SHADOW8-B-22 "Aux output 9" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-E-3 ↔ SHADOW8-B-23 | OEM-E-3 "Reverse lockout solenoid (RVS, Type-S)" [low_side_out] is wired to SHADOW8-B-23 "Aux output 10" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-E-31 ↔ SHADOW8-B-24 | OEM-E-31 "Malfunction indicator lamp (MIL)" [low_side_out] is wired to SHADOW8-B-24 "Aux output 11" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | SUPPLY_GROUP | OEM-A-20 + OEM-A-21 + OEM-E-6 + SHADOW8-A-3 + SP-5V1-1 | Supplies meant to stay independent share one net: OEM-A-20 [k_vcc2], OEM-A-21 [k_vcc1], OEM-E-6 [k_vcc3]. The new ECU has no free 5 V reference, so they share one: normal on a standalone, but a short on any of these sensors drops them all. |
| info | NET_FAMILY | OEM-A-10 ↔ SHADOW8-B-16 | OEM-A-10 "A/F sensor heater control (AFSHTC)" [low_side_out] is wired to SHADOW8-B-16 "Aux output 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A-12 ↔ SHADOW8-B-17 | OEM-A-12 "Idle air control valve (IACV)" [low_side_out] is wired to SHADOW8-B-17 "Aux output 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-B-1 ↔ SHADOW8-B-7 | OEM-B-1 "VTC oil control solenoid (+)" [low_side_out] is wired to SHADOW8-B-7 "Injector cylinder 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-17 ↔ SHADOW8-A-14 | OEM-B-17 "Intake air temp sensor (IAT)" [temp_in] is wired to SHADOW8-A-14 "Analog voltage 5" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-B-18 ↔ SHADOW8-B-8 | OEM-B-18 "Alternator control (ALTC)" [low_side_out] is wired to SHADOW8-B-8 "Injector cylinder 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-21 ↔ SHADOW8-B-9 | OEM-B-21 "Evap canister purge valve (PCS)" [low_side_out] is wired to SHADOW8-B-9 "Injector cylinder 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-6 ↔ SHADOW8-B-6 | OEM-B-6 "VTEC solenoid (VTS)" [low_side_out] is wired to SHADOW8-B-6 "Injector cylinder 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-8 ↔ SHADOW8-A-13 | OEM-B-8 "Coolant temp sensor (ECT)" [temp_in] is wired to SHADOW8-A-13 "Analog voltage 4" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-E-21 ↔ SHADOW8-B-15 | OEM-E-21 "Secondary O2 heater control (SO2SHTC)" [low_side_out] is wired to SHADOW8-B-15 "Aux output 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E-9 ↔ SHADOW8-B-14 | OEM-E-9 "A/F sensor heater relay control (AFSHTCR)" [low_side_out] is wired to SHADOW8-B-14 "Aux output 5" [switch_out]. Configure this output as low side. |
| info | UNMAPPED | OEM | 9 optional OEM pins are not mapped: OEM-A-28 A/F sensor - (AFS-, wideband Vs); OEM-A-31 A/F sensor + (AFS+, wideband Ip); OEM-E-13 Multiplex communication (SEFMJ); OEM-E-23 K-line (diagnostic); OEM-E-25 Engine speed pulse / tacho (NEP); OEM-E-26 Vehicle speed output (VSSOUT); OEM-E-27 Immobilizer code (IMOCD); OEM-E-29 Service check signal (SCS); OEM-E-30 Write enable signal (WEN) |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Open items: - OEM-A 6: Camshaft position B (CMP B): no free cam_hall/cam_vr/frequency_in input on Emtron Shadow 8 - SHADOW8-B 1: Battery constant (HOT) supply: required by Emtron Shadow 8 but no stock pin feeds it; wire by hand Not wired: - SHADOW8-A 17: Knock 1 − left open: the stock knock sensor has one ECU wire; check the ECU manual for single-wire knock sensors - OEM-E 25: Engine speed pulse / tacho (NEP): no free tacho/frequency_out/low_side/ls_hs on Emtron Shadow 8 - OEM-E 26: Vehicle speed output (VSSOUT): no free frequency_out/tacho/low_side/ls_hs on Emtron Shadow 8 - OEM-A 31: A/F sensor + (AFS+, wideband Ip): no free wb_ip on Emtron Shadow 8 - OEM-A 28: A/F sensor - (AFS-, wideband Vs): no free wb_vs on Emtron Shadow 8 - OEM-E 13: Multiplex communication (SEFMJ): no free k_line on Emtron Shadow 8 - OEM-E 23: K-line (diagnostic): no free k_line on Emtron Shadow 8 - OEM-E 27: Immobilizer code (IMOCD): not classified in the library; wire by hand - OEM-E 29: Service check signal (SCS): not classified in the library; wire by hand - OEM-E 30: Write enable signal (WEN): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Emtron Shadow 8 ECU datasheet | https://docs.emtronaustralia.com.au/engine-management/datasheets/shadow-8-datasheet/index.html | archive | 2026-10-05 | f004c9a8d60c |
| 4 | vendor_doc | Emtron Shadow 8 pinout | https://docs.emtronaustralia.com.au/engine-management/wiring/shadow-8/shadow-8-pinout/index.html | archive | 2026-10-05 | f510053951c7 |
| 3 | forum | FFS TechNet: K-series 02-06 RSX ECU pin diagram (Helm) | https://ff-squad.com/technet2/k-series-02-06-rsx-ecu-pin-diagram/ | archive | 2026-10-05 | b2b85002666e |