Toyota Supra A80 1993-98 USDM (2JZ-GTE, non-VVT) → rusEFI Proteus (auto)
Toyota Supra A80 1993-98 USDM (2JZ-GTE, non-VVT) — rusEFI — Proteus
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-08
Before you start
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 73 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-E9-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-E9-69 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E9-78 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E9-79 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E9-80 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E9-5 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E9-6 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-E9-65 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-E9-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E9-41 | PROTEUS-White35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E9-27 | PROTEUS-Black23-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E9-26 | PROTEUS-Black23-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E9-25 | PROTEUS-Black23-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E9-50 | PROTEUS-White35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E9-49 | PROTEUS-White35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E9-57 | PROTEUS-Black35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E9-56 | PROTEUS-Black35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E9-55 | PROTEUS-Black35-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E9-54 | PROTEUS-Black35-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E9-53 | PROTEUS-Black35-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E9-52 | PROTEUS-Black35-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E9-20 | PROTEUS-Black35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E9-19 | PROTEUS-Black35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E9-18 | PROTEUS-Black35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E9-17 | PROTEUS-Black35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E9-16 | PROTEUS-Black35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E9-15 | PROTEUS-Black35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E10-1 | PROTEUS-Black23-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E10-23 | PROTEUS-Black35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E10-24 | PROTEUS-Black35-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E9-71 | PROTEUS-Black35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E9-72 | PROTEUS-Black35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E10-22 | PROTEUS-Black35-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E10-6 | PROTEUS-Black35-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E9-32 | PROTEUS-Black35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E9-33 | PROTEUS-Black35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E9-34 | PROTEUS-Black35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E9-35 | PROTEUS-Black35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E9-60 | PROTEUS-Black23-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-E9-73 | PROTEUS-Black23-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-E9-74 | PROTEUS-Black23-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-E9-62 | PROTEUS-White35-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-E9-43 | PROTEUS-White35-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-E9-47 | PROTEUS-White35-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-E9-48 | PROTEUS-White35-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-E9-44 | PROTEUS-White35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-E9-45 | PROTEUS-White35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-E10-2 | PROTEUS-Black23-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-E10-21 | PROTEUS-Black23-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-E9-58 | PROTEUS-Black23-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-E10-15 | PROTEUS-Black23-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-E10-4 | PROTEUS-Black23-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-E9-76 | PROTEUS-White35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | PROTEUS-Black23-23 | PROTEUS-Black23-12 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | PROTEUS-Black23-23 | PROTEUS-Black23-14 | open (OL) | +12 V supply must not touch power ground | |
| 3 | PROTEUS-White35-10 | PROTEUS-Black23-12 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 4 | PROTEUS-Black23-14 | PROTEUS-White35-10 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | PROTEUS-Black23-23 | PROTEUS-White35-10 | open (OL) | +12 V supply must not touch 5 V sensor reference |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-E10
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition switch (IGSW) | — | W48 | — | 0.5 | PROTEUS-Black23-18 | — | — | — |
| 15 | Electrical load sensor (ELS) | — | W71 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
| 16 | Tachometer output | — | — | — | — | — | — | — | — |
| 2 | Vehicle speed sensor (SP1) | — | W68 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
| 21 | Fuel pump diagnostic (DI) | — | W69 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| 22 | Fuel pump control (FPC) | — | W53 | — | 0.5 | PROTEUS-Black35-11 | — | — | — |
| 23 | A/C clutch relay (ACMG) | — | W49 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| 24 | Main relay control (M-REL) | — | W50 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| 31 | ECU power +B (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 33 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 4 | Brake switch (STP) | — | W72 | — | 0.5 | PROTEUS-Black23-11 | — | — | — |
| 6 | Malfunction indicator lamp (MIL) | — | W54 | — | 0.5 | PROTEUS-Black35-12 | — | — | — |
OEM-E9
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 15 | Injector 6 | — | W47 | — | 0.5 | PROTEUS-Black35-6 | — | — | — |
| 16 | Injector 5 | — | W46 | — | 0.5 | PROTEUS-Black35-5 | — | — | — |
| 17 | Injector 4 | — | W45 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
| 18 | Injector 3 | — | W44 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| 19 | Injector 2 | — | W43 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
| 20 | Injector 1 | — | W42 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| 25 | Camshaft position 2 (G2) | — | W33 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| 26 | Camshaft position 1 (G1) | — | W31 | — | 0.5 | PROTEUS-Black23-4 | — | — | — |
| 27 | Crank position (NE) | — | W29 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| 32 | ISC stepper winding | — | W55 | — | 0.5 | PROTEUS-Black35-23 | — | — | — |
| 33 | ISC stepper winding | — | W56 | — | 0.5 | PROTEUS-Black35-7 | — | — | — |
| 34 | ISC stepper winding | — | W57 | — | 0.5 | PROTEUS-Black35-19 | — | — | — |
| 35 | ISC stepper winding | — | W58 | — | 0.5 | PROTEUS-Black35-8 | — | — | — |
| 4 | Power ground (E11) | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 41 | Sensor supply +5V (VCC) | — | W28 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
| 43 | Throttle position (VTA1) | — | W63 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| 44 | Coolant temperature (THW) | — | W66 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| 45 | Intake air temperature (THA) | — | W67 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| 47 | O2 sensor 2 (OX2) | — | W64 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| 48 | O2 sensor 1 (OX1) | — | W65 | — | 0.5 | PROTEUS-White35-25 | — | — | — |
| 49 | Knock sensor 2 (KNK2) | — | W35 | — | 0.5 | PROTEUS-White35-35 | — | — | — |
| 5 | Cam sensor 2 ground (G2-) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 50 | Knock sensor 1 (KNK1) | — | W34 | — | 0.5 | PROTEUS-White35-34 | — | — | — |
| 52 | Ignition 6 (IGT6) | — | W41 | — | 0.5 | PROTEUS-Black35-31 | — | — | — |
| 53 | Ignition 5 (IGT5) | — | W40 | — | 0.5 | PROTEUS-Black35-32 | — | — | — |
| 54 | Ignition 4 (IGT4) | — | W39 | — | 0.5 | PROTEUS-Black35-33 | — | — | — |
| 55 | Ignition 3 (IGT3) | — | W38 | — | 0.5 | PROTEUS-Black35-22 | — | — | — |
| 56 | Ignition 2 (IGT2) | — | W37 | — | 0.5 | PROTEUS-Black35-34 | — | — | — |
| 57 | Ignition 1 (IGT1) | — | W36 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| 58 | Ignition confirmation (IGF) | — | W70 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
| 6 | Cam sensor 1 ground (G1-) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 60 | Wastegate VSV (boost control) | — | W59 | — | 0.5 | PROTEUS-Black23-6 | — | — | — |
| 62 | MAP sensor (PIM) | — | W62 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
| 65 | Sensor ground (E2) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 69 | ECU power ground (E1) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Crank sensor ground (NE-) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 71 | O2 heater 1 (HT1) | — | W51 | — | 0.5 | PROTEUS-Black35-21 | — | — | — |
| 72 | O2 heater 2 (HT2) | — | W52 | — | 0.5 | PROTEUS-Black35-10 | — | — | — |
| 73 | Fuel pressure-up VSV (FPU) | — | W60 | — | 0.5 | PROTEUS-Black23-7 | — | — | — |
| 74 | Purge VSV (EVAP) | — | W61 | — | 0.5 | PROTEUS-Black23-15 | — | — | — |
| 76 | Starter signal (STA) | — | W73 | — | 0.5 | PROTEUS-White35-15 | — | — | — |
| 78 | Power ground (E01) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 79 | Power ground (E01/E02) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 80 | Power ground (E01/E02) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W33 | — | 0.5 | OEM-E9-25 | — | — | — |
| 10 | Digital 1 | — | W69 | — | 0.5 | OEM-E10-21 | — | — | — |
| 11 | Digital 6 | — | W72 | — | 0.5 | OEM-E10-4 | — | — | — |
| 12 | VR 2 negative | — | W32 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | VR 1 negative | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | W61 | — | 0.5 | OEM-E9-74 | — | — | — |
| 16 | CAN 1 Low | — | — | — | — | — | — | — | — |
| 17 | CAN 1 High | — | — | — | — | — | — | — | — |
| 18 | Ignition switch in | — | W48 | — | 0.5 | OEM-E10-1 | — | — | — |
| 19 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W68 | — | 0.5 | OEM-E10-2 | — | — | — |
| 20 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W70 | — | 0.5 | OEM-E9-58 | — | — | — |
| 4 | VR 2 positive | — | W31 | — | 0.5 | OEM-E9-26 | — | — | — |
| 5 | VR 1 positive | — | W29 | — | 0.5 | OEM-E9-27 | — | — | — |
| 6 | ETB 1 negative | — | W59 | — | 0.5 | OEM-E9-60 | — | — | — |
| 7 | ETB 1 positive | — | W60 | — | 0.5 | OEM-E9-73 | — | — | — |
| 8 | ETB 2 negative | — | — | — | — | — | — | — | — |
| 9 | Digital 5 | — | W71 | — | 0.5 | OEM-E10-15 | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | W52 | — | 0.5 | OEM-E9-72 | — | — | — |
| 11 | Lowside 14 | — | W53 | — | 0.5 | OEM-E10-22 | — | — | — |
| 12 | Lowside 15 | — | W54 | — | 0.5 | OEM-E10-6 | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W43 | — | 0.5 | OEM-E9-19 | — | — | — |
| 16 | Injector 4 | — | W45 | — | 0.5 | OEM-E9-17 | — | — | — |
| 17 | Power ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | W57 | — | 0.5 | OEM-E9-34 | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W49 | — | 0.5 | OEM-E10-23 | — | — | — |
| 21 | Lowside 12 | — | W51 | — | 0.5 | OEM-E9-71 | — | — | — |
| 22 | Ignition 3 | — | W38 | — | 0.5 | OEM-E9-55 | — | — | — |
| 23 | Lowside 16 | — | W55 | — | 0.5 | OEM-E9-32 | — | — | — |
| 24 | Power ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | — | — | — | — | — | — | — |
| 3 | Injector 1 | — | W42 | — | 0.5 | OEM-E9-20 | — | — | — |
| 30 | Ignition 7 | — | — | — | — | — | — | — | — |
| 31 | Ignition 6 | — | W41 | — | 0.5 | OEM-E9-52 | — | — | — |
| 32 | Ignition 5 | — | W40 | — | 0.5 | OEM-E9-53 | — | — | — |
| 33 | Ignition 4 | — | W39 | — | 0.5 | OEM-E9-54 | — | — | — |
| 34 | Ignition 2 | — | W37 | — | 0.5 | OEM-E9-56 | — | — | — |
| 35 | Ignition 1 | — | W36 | — | 0.5 | OEM-E9-57 | — | — | — |
| 4 | Injector 3 | — | W44 | — | 0.5 | OEM-E9-18 | — | — | — |
| 5 | Injector 5 | — | W46 | — | 0.5 | OEM-E9-16 | — | — | — |
| 6 | Injector 6 | — | W47 | — | 0.5 | OEM-E9-15 | — | — | — |
| 7 | Injector 7 | — | W56 | — | 0.5 | OEM-E9-33 | — | — | — |
| 8 | Injector 9 | — | W58 | — | 0.5 | OEM-E9-35 | — | — | — |
| 9 | Lowside 11 | — | W50 | — | 0.5 | OEM-E10-24 | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W28 | — | 0.5 | OEM-E9-41 | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W62 | — | 0.5 | OEM-E9-62 | — | — | — |
| 14 | Analog Volt 3 | — | W64 | — | 0.5 | OEM-E9-47 | — | — | — |
| 15 | Analog Volt 5 | — | W73 | — | 0.5 | OEM-E9-76 | — | — | — |
| 16 | Analog Volt 7 | — | — | — | — | — | — | — | — |
| 17 | Analog Volt 9 | — | — | — | — | — | — | — | — |
| 18 | Analog Volt 11 | — | — | — | — | — | — | — | — |
| 19 | Thermistor 1 | — | — | — | — | — | — | — | — |
| 2 | Sensor ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W66 | — | 0.5 | OEM-E9-44 | — | — | — |
| 21 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 22 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 23 | Sensor ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W63 | — | 0.5 | OEM-E9-43 | — | — | — |
| 25 | Analog Volt 4 | — | W65 | — | 0.5 | OEM-E9-48 | — | — | — |
| 26 | Analog Volt 6 | — | — | — | — | — | — | — | — |
| 27 | Analog Volt 8 | — | — | — | — | — | — | — | — |
| 28 | Analog Volt 10 | — | — | — | — | — | — | — | — |
| 29 | Sensor ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W67 | — | 0.5 | OEM-E9-45 | — | — | — |
| 31 | Thermistor 4 | — | — | — | — | — | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | W34 | — | 0.5 | OEM-E9-50 | — | — | — |
| 35 | Knock 2 | — | W35 | — | 0.5 | OEM-E9-49 | — | — | — |
| 4 | Sensor ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-E9-5 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-E9-6 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-E9-65 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-E9-7 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | PROTEUS-Black23-12 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E10-31 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W3 | — | 0.85 | OEM-E9-4 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-E9-69 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-E9-78 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-E9-79 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-E9-80 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E10-1 | Ignition switch (IGSW) | digital_in | PROTEUS-Black23-18 | Ignition switch in | digital_in | corroborated | |
| OEM-E10-15 | Electrical load sensor (ELS) | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | single_source | |
| OEM-E10-16 | Tachometer output | tacho_out | — | — | — | corroborated | |
| OEM-E10-2 | Vehicle speed sensor (SP1) | digital_in | PROTEUS-Black23-2 | Digital 3 | digital_in | corroborated | |
| OEM-E10-21 | Fuel pump diagnostic (DI) | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | single_source | |
| OEM-E10-22 | Fuel pump control (FPC) | low_side_out | PROTEUS-Black35-11 | Lowside 14 | low_side_out | corroborated | |
| OEM-E10-23 | A/C clutch relay (ACMG) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | corroborated | |
| OEM-E10-24 | Main relay control (M-REL) | low_side_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | corroborated | |
| OEM-E10-31 | ECU power +B (main relay) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | corroborated | |
| OEM-E10-33 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-E10-4 | Brake switch (STP) | digital_in | PROTEUS-Black23-11 | Digital 6 | digital_in | single_source | |
| OEM-E10-6 | Malfunction indicator lamp (MIL) | low_side_out | PROTEUS-Black35-12 | Lowside 15 | low_side_out | corroborated | |
| OEM-E9-15 | Injector 6 | injector_out | PROTEUS-Black35-6 | Injector 6 | injector_out | corroborated | |
| OEM-E9-16 | Injector 5 | injector_out | PROTEUS-Black35-5 | Injector 5 | injector_out | corroborated | |
| OEM-E9-17 | Injector 4 | injector_out | PROTEUS-Black35-16 | Injector 4 | injector_out | corroborated | |
| OEM-E9-18 | Injector 3 | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | corroborated | |
| OEM-E9-19 | Injector 2 | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | corroborated | |
| OEM-E9-20 | Injector 1 | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | corroborated | |
| OEM-E9-25 | Camshaft position 2 (G2) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | corroborated | |
| OEM-E9-26 | Camshaft position 1 (G1) | trigger_in | PROTEUS-Black23-4 | VR 2 positive | trigger_in | corroborated | |
| OEM-E9-27 | Crank position (NE) | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | corroborated | |
| OEM-E9-32 | ISC stepper winding | low_side_out | PROTEUS-Black35-23 | Lowside 16 | low_side_out | corroborated | |
| OEM-E9-33 | ISC stepper winding | low_side_out | PROTEUS-Black35-7 | Injector 7 | injector_out | corroborated | |
| OEM-E9-34 | ISC stepper winding | low_side_out | PROTEUS-Black35-19 | Injector 8 | injector_out | corroborated | |
| OEM-E9-35 | ISC stepper winding | low_side_out | PROTEUS-Black35-8 | Injector 9 | injector_out | corroborated | |
| OEM-E9-4 | Power ground (E11) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-E9-41 | Sensor supply +5V (VCC) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | corroborated | |
| OEM-E9-43 | Throttle position (VTA1) | analog_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | corroborated | |
| OEM-E9-44 | Coolant temperature (THW) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | corroborated | |
| OEM-E9-45 | Intake air temperature (THA) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | corroborated | |
| OEM-E9-47 | O2 sensor 2 (OX2) | lambda_nb_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | single_source | |
| OEM-E9-48 | O2 sensor 1 (OX1) | lambda_nb_in | PROTEUS-White35-25 | Analog Volt 4 | analog_in | corroborated | |
| OEM-E9-49 | Knock sensor 2 (KNK2) | knock_in | PROTEUS-White35-35 | Knock 2 | knock_in | corroborated | |
| OEM-E9-5 | Cam sensor 2 ground (G2-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | corroborated | |
| OEM-E9-50 | Knock sensor 1 (KNK1) | knock_in | PROTEUS-White35-34 | Knock 1 | knock_in | corroborated | |
| OEM-E9-52 | Ignition 6 (IGT6) | ignition_out | PROTEUS-Black35-31 | Ignition 6 | ignition_out | corroborated | |
| OEM-E9-53 | Ignition 5 (IGT5) | ignition_out | PROTEUS-Black35-32 | Ignition 5 | ignition_out | corroborated | |
| OEM-E9-54 | Ignition 4 (IGT4) | ignition_out | PROTEUS-Black35-33 | Ignition 4 | ignition_out | corroborated | |
| OEM-E9-55 | Ignition 3 (IGT3) | ignition_out | PROTEUS-Black35-22 | Ignition 3 | ignition_out | corroborated | |
| OEM-E9-56 | Ignition 2 (IGT2) | ignition_out | PROTEUS-Black35-34 | Ignition 2 | ignition_out | corroborated | |
| OEM-E9-57 | Ignition 1 (IGT1) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | corroborated | |
| OEM-E9-58 | Ignition confirmation (IGF) | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | single_source | |
| OEM-E9-6 | Cam sensor 1 ground (G1-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | corroborated | |
| OEM-E9-60 | Wastegate VSV (boost control) | low_side_out | PROTEUS-Black23-6 | ETB 1 negative | hbridge_out | single_source | |
| OEM-E9-62 | MAP sensor (PIM) | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | single_source | |
| OEM-E9-65 | Sensor ground (E2) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | corroborated | |
| OEM-E9-69 | ECU power ground (E1) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-E9-7 | Crank sensor ground (NE-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | corroborated | |
| OEM-E9-71 | O2 heater 1 (HT1) | low_side_out | PROTEUS-Black35-21 | Lowside 12 | low_side_out | single_source | |
| OEM-E9-72 | O2 heater 2 (HT2) | low_side_out | PROTEUS-Black35-10 | Lowside 13 | low_side_out | single_source | |
| OEM-E9-73 | Fuel pressure-up VSV (FPU) | low_side_out | PROTEUS-Black23-7 | ETB 1 positive | hbridge_out | single_source | |
| OEM-E9-74 | Purge VSV (EVAP) | low_side_out | PROTEUS-Black23-15 | ETB 2 positive | hbridge_out | single_source | |
| OEM-E9-76 | Starter signal (STA) | digital_in | PROTEUS-White35-15 | Analog Volt 5 | analog_in | single_source | |
| OEM-E9-78 | Power ground (E01) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-E9-79 | Power ground (E01/E02) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated | |
| OEM-E9-80 | Power ground (E01/E02) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | no route | ECU power +B (main relay) | — | |
| W2 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W3 | OEM-E9-4 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W4 | OEM-E9-69 | SP-GND-1 | 0.85 | no route | ECU power ground (E1) | — | |
| W5 | OEM-E9-78 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W6 | OEM-E9-79 | SP-GND-1 | 0.85 | no route | Power ground (E01/E02) | — | |
| W7 | OEM-E9-80 | SP-GND-1 | 0.85 | no route | Power ground (E01/E02) | — | |
| W8 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W9 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W10 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W12 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W13 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W14 | OEM-E9-5 | SP-0V-1 | 0.5 | no route | Cam sensor 2 ground (G2-) | — | |
| W15 | OEM-E9-6 | SP-0V-1 | 0.5 | no route | Cam sensor 1 ground (G1-) | — | |
| W16 | OEM-E9-65 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W17 | OEM-E9-7 | SP-0V-1 | 0.5 | no route | Crank sensor ground (NE-) | — | |
| W18 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W19 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W20 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W21 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W22 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W23 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W24 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W25 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W26 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W27 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W28 | OEM-E9-41 | PROTEUS-White35-10 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W29 | OEM-E9-27 | PROTEUS-Black23-5 | 0.5 | no route | Crank position (NE) | — | |
| W30 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | no route | VR 1 negative | — | |
| W31 | OEM-E9-26 | PROTEUS-Black23-4 | 0.5 | no route | Camshaft position 1 (G1) | — | |
| W32 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | no route | VR 2 negative | — | |
| W33 | OEM-E9-25 | PROTEUS-Black23-1 | 0.5 | no route | Camshaft position 2 (G2) | — | |
| W34 | OEM-E9-50 | PROTEUS-White35-34 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W35 | OEM-E9-49 | PROTEUS-White35-35 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W36 | OEM-E9-57 | PROTEUS-Black35-35 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W37 | OEM-E9-56 | PROTEUS-Black35-34 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W38 | OEM-E9-55 | PROTEUS-Black35-22 | 0.5 | no route | Ignition 3 (IGT3) | — | |
| W39 | OEM-E9-54 | PROTEUS-Black35-33 | 0.5 | no route | Ignition 4 (IGT4) | — | |
| W40 | OEM-E9-53 | PROTEUS-Black35-32 | 0.5 | no route | Ignition 5 (IGT5) | — | |
| W41 | OEM-E9-52 | PROTEUS-Black35-31 | 0.5 | no route | Ignition 6 (IGT6) | — | |
| W42 | OEM-E9-20 | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 | — | |
| W43 | OEM-E9-19 | PROTEUS-Black35-15 | 0.5 | no route | Injector 2 | — | |
| W44 | OEM-E9-18 | PROTEUS-Black35-4 | 0.5 | no route | Injector 3 | — | |
| W45 | OEM-E9-17 | PROTEUS-Black35-16 | 0.5 | no route | Injector 4 | — | |
| W46 | OEM-E9-16 | PROTEUS-Black35-5 | 0.5 | no route | Injector 5 | — | |
| W47 | OEM-E9-15 | PROTEUS-Black35-6 | 0.5 | no route | Injector 6 | — | |
| W48 | OEM-E10-1 | PROTEUS-Black23-18 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W49 | OEM-E10-23 | PROTEUS-Black35-20 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W50 | OEM-E10-24 | PROTEUS-Black35-9 | 0.5 | no route | Main relay control (M-REL) | — | |
| W51 | OEM-E9-71 | PROTEUS-Black35-21 | 0.5 | no route | O2 heater 1 (HT1) | — | |
| W52 | OEM-E9-72 | PROTEUS-Black35-10 | 0.5 | no route | O2 heater 2 (HT2) | — | |
| W53 | OEM-E10-22 | PROTEUS-Black35-11 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W54 | OEM-E10-6 | PROTEUS-Black35-12 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W55 | OEM-E9-32 | PROTEUS-Black35-23 | 0.5 | no route | ISC stepper winding | — | |
| W56 | OEM-E9-33 | PROTEUS-Black35-7 | 0.5 | no route | ISC stepper winding | — | |
| W57 | OEM-E9-34 | PROTEUS-Black35-19 | 0.5 | no route | ISC stepper winding | — | |
| W58 | OEM-E9-35 | PROTEUS-Black35-8 | 0.5 | no route | ISC stepper winding | — | |
| W59 | OEM-E9-60 | PROTEUS-Black23-6 | 0.5 | no route | Wastegate VSV (boost control) | — | |
| W60 | OEM-E9-73 | PROTEUS-Black23-7 | 0.5 | no route | Fuel pressure-up VSV (FPU) | — | |
| W61 | OEM-E9-74 | PROTEUS-Black23-15 | 0.5 | no route | Purge VSV (EVAP) | — | |
| W62 | OEM-E9-62 | PROTEUS-White35-13 | 0.5 | no route | MAP sensor (PIM) | — | |
| W63 | OEM-E9-43 | PROTEUS-White35-24 | 0.5 | no route | Throttle position (VTA1) | — | |
| W64 | OEM-E9-47 | PROTEUS-White35-14 | 0.5 | no route | O2 sensor 2 (OX2) | — | |
| W65 | OEM-E9-48 | PROTEUS-White35-25 | 0.5 | no route | O2 sensor 1 (OX1) | — | |
| W66 | OEM-E9-44 | PROTEUS-White35-20 | 0.5 | no route | Coolant temperature (THW) | — | |
| W67 | OEM-E9-45 | PROTEUS-White35-30 | 0.5 | no route | Intake air temperature (THA) | — | |
| W68 | OEM-E10-2 | PROTEUS-Black23-2 | 0.5 | no route | Vehicle speed sensor (SP1) | — | |
| W69 | OEM-E10-21 | PROTEUS-Black23-10 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W70 | OEM-E9-58 | PROTEUS-Black23-3 | 0.5 | no route | Ignition confirmation (IGF) | — | |
| W71 | OEM-E10-15 | PROTEUS-Black23-9 | 0.5 | no route | Electrical load sensor (ELS) | — | |
| W72 | OEM-E10-4 | PROTEUS-Black23-11 | 0.5 | no route | Brake switch (STP) | — | |
| W73 | OEM-E9-76 | PROTEUS-White35-15 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (9)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NET_FAMILY | OEM-E9-60 ↔ PROTEUS-Black23-6 | OEM-E9-60 "Wastegate VSV (boost control)" [low_side_out] is wired to PROTEUS-Black23-6 "ETB 1 negative" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-E9-73 ↔ PROTEUS-Black23-7 | OEM-E9-73 "Fuel pressure-up VSV (FPU)" [low_side_out] is wired to PROTEUS-Black23-7 "ETB 1 positive" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-E9-74 ↔ PROTEUS-Black23-15 | OEM-E9-74 "Purge VSV (EVAP)" [low_side_out] is wired to PROTEUS-Black23-15 "ETB 2 positive" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-E9-76 ↔ PROTEUS-White35-15 | OEM-E9-76 "Starter signal (STA)" [digital_in] is wired to PROTEUS-White35-15 "Analog Volt 5" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-E9-33 ↔ PROTEUS-Black35-7 | OEM-E9-33 "ISC stepper winding" [low_side_out] is wired to PROTEUS-Black35-7 "Injector 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-34 ↔ PROTEUS-Black35-19 | OEM-E9-34 "ISC stepper winding" [low_side_out] is wired to PROTEUS-Black35-19 "Injector 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-35 ↔ PROTEUS-Black35-8 | OEM-E9-35 "ISC stepper winding" [low_side_out] is wired to PROTEUS-Black35-8 "Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-7 ↔ PROTEUS-Black23-13 | OEM-E9-7 "Crank sensor ground (NE-)" [sensor_ground] is wired to PROTEUS-Black23-13 "VR 1 negative" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 1 optional OEM pins are not mapped: OEM-E10-16 Tachometer output |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E10-33 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Not wired: - OEM-E10 33: Battery constant (BATT): rusEFI Proteus has no battery-constant input; not needed - OEM-E10 16: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on rusEFI Proteus
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER: ECU2JZ JZA80 2JZ-GTE adapter technical information (knock sensor count) | https://drive.google.com/file/d/15sTEetwLt0aKjuQo6aXODn4EBAkEJrtN/view | archive | 2026-10-05 | 6a4adabba0f5 |
| 4 | vendor_doc | Link SupraLink TS2JZX install manual (JZA80 2JZ-GTE non-VVT) | https://linkecu.com/documentation/TS2JZX.pdf | — | — | — |
| 4 | service_manual | Toyota FSM P1300 Igniter Circuit (2JZ-GTE) — IGT1-6 / IGF ECM terminals | http://97supraturbo.com/Trouble%20Codes/P1300%20Ignitor.pdf | — | — | — |
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors | archive | 2026-10-05 | 738a2ea934c0 |