Mustang GT 2011–14 (Coyote 5.0) → AMP EFI MS3Pro EVO+ (auto)
Mustang GT 2011–14 (Coyote 5.0) — AMP EFI — MS3Pro EVO+
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-08
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 7: read the Findings page before cutting any wire |
| Size of the job | 68 wires · 8 connectors · 1 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-C175E-18 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | SP-14V-1 | MS3PROEVO-A-35 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-C175E-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-C175E-40 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-C175E-49 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-C175E-52 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-C175E-54 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-C175E-67 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-C175E-69 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-0V-1 | MS3PROEVO-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-0V-1 | MS3PROEVO-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-0V-1 | MS3PROEVO-C-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-0V-1 | MS3PROEVO-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-0V-1 | MS3PROEVO-C-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-0V-1 | MS3PROEVO-C-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | MS3PROEVO-C-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-C175E-17 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-C175E-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-C175E-8 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-5V1-1 | MS3PROEVO-A-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-C175E-70 | MS3PROEVO-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | MS3PROEVO-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-C175E-55 | MS3PROEVO-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | MS3PROEVO-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-C175E-56 | MS3PROEVO-B-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | MS3PROEVO-B-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-C175E-41 | MS3PROEVO-B-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-C175E-42 | MS3PROEVO-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-C175E-53 | MS3PROEVO-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-C175E-68 | MS3PROEVO-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-C175E-87 | MS3PROEVO-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-C175E-88 | MS3PROEVO-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-C175E-89 | MS3PROEVO-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-C175E-90 | MS3PROEVO-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-C175E-92 | MS3PROEVO-B-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-C175E-93 | MS3PROEVO-B-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-C175E-94 | MS3PROEVO-B-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-C175E-95 | MS3PROEVO-B-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-C175E-1 | MS3PROEVO-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-C175E-62 | MS3PROEVO-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-C175E-46 | MS3PROEVO-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-C175E-3 | MS3PROEVO-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-C175E-2 | MS3PROEVO-B-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-C175E-31 | MS3PROEVO-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-C175E-61 | MS3PROEVO-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-C175E-16 | MS3PROEVO-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-C175E-81 | MS3PROEVO-B-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-C175E-82 | MS3PROEVO-B-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-C175E-39 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | SP-SHD-1 | MS3PROEVO-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-C175E-78 | MS3PROEVO-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-C175E-79 | MS3PROEVO-C-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-C175E-83 | MS3PROEVO-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-C175E-84 | MS3PROEVO-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-C175E-5 | MS3PROEVO-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-C175E-4 | MS3PROEVO-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-C175E-7 | MS3PROEVO-C-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-C175E-6 | MS3PROEVO-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-C175E-71 | MS3PROEVO-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-C175E-44 | MS3PROEVO-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-C175E-10 | MS3PROEVO-A-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-C175E-9 | MS3PROEVO-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-C175E-27 | MS3PROEVO-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-C175E-47 | MS3PROEVO-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-C175E-45 | MS3PROEVO-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-C175E-30 | MS3PROEVO-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-C175E-48 | MS3PROEVO-B-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-C175E-57 | MS3PROEVO-B-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MS3PROEVO-A-35 | MS3PROEVO-A-13 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | MS3PROEVO-A-8 | MS3PROEVO-A-13 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 3 | MS3PROEVO-A-8 | MS3PROEVO-A-35 | open (OL) | 5 V sensor reference must not touch +12 V supply |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MS3PROEVO-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | High current out 1 | — | W58 | — | 0.5 | OEM-C175E-6 | — | — | — |
| 10 | MAT in | — | W63 | — | 0.5 | OEM-C175E-27 | — | — | — |
| 11 | CLT in | — | W64 | — | 0.5 | OEM-C175E-47 | — | — | — |
| 12 | Analog In 6 | — | — | — | — | — | — | — | — |
| 13 | Logic Ground | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | PWM / Idle Out 1 | — | W51 | — | 0.5 | OEM-C175E-78 | — | — | — |
| 15 | CKP− | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Ground Shield Drain | — | W50 | — | 0.5 | SP-SHD-1 | — | — | — |
| 17 | Analog In 7 | — | — | — | — | — | — | — | — |
| 18 | Sensor return | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Analog in 1 | — | W60 | — | 0.5 | OEM-C175E-44 | — | — | — |
| 2 | High current out 2 | — | W59 | — | 0.5 | OEM-C175E-71 | — | — | — |
| 20 | Analog in 2 | — | W62 | — | 0.5 | OEM-C175E-9 | — | — | — |
| 21 | Analog in 3 | — | W65 | — | 0.5 | OEM-C175E-45 | — | — | — |
| 22 | Analog In 4 | — | — | — | — | — | — | — | — |
| 23 | Analog In 5 | — | — | — | — | — | — | — | — |
| 24 | Tach out | — | — | — | — | — | — | — | — |
| 25 | O2 in | — | — | — | — | — | — | — | — |
| 26 | CMP+ | — | W23 | — | 0.5 | OEM-C175E-55 | — | — | — |
| 27 | CMP− | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 28 | Fuel pump relay out | — | — | — | — | — | — | — | — |
| 29 | PWM out 2 | — | W53 | — | 0.5 | OEM-C175E-83 | — | — | — |
| 3 | Injector out J | — | W39 | — | 0.5 | OEM-C175E-1 | — | — | — |
| 30 | PWM out 3 | — | W55 | — | 0.5 | OEM-C175E-5 | — | — | — |
| 31 | Knock in 1 | — | W29 | — | 0.5 | OEM-C175E-53 | — | — | — |
| 32 | Digital switched in 1 | — | W66 | — | 0.5 | OEM-C175E-30 | — | — | — |
| 33 | CAN L | — | — | — | — | — | — | — | — |
| 34 | CAN H | — | — | — | — | — | — | — | — |
| 35 | 12V+ switched power in | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Injector out I | — | W40 | — | 0.5 | OEM-C175E-62 | — | — | — |
| 5 | High current out 3 | — | — | — | — | — | — | — | — |
| 6 | CKP+ | — | W21 | — | 0.5 | OEM-C175E-70 | — | — | — |
| 7 | Knock In 2 | — | W30 | — | 0.5 | OEM-C175E-68 | — | — | — |
| 8 | 5V+ VREF out | — | W20 | — | 0.5 | SP-5V1-1 | — | — | — |
| 9 | TPS in | — | W61 | — | 0.5 | OEM-C175E-10 | — | — | — |
MS3PROEVO-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector out A | — | W41 | — | 0.5 | OEM-C175E-46 | — | — | — |
| 10 | Injector out F | — | W42 | — | 0.5 | OEM-C175E-3 | — | — | — |
| 11 | Injector out G | — | W43 | — | 0.5 | OEM-C175E-2 | — | — | — |
| 12 | Injector out H | — | W44 | — | 0.5 | OEM-C175E-31 | — | — | — |
| 13 | Spark out G | — | W31 | — | 0.5 | OEM-C175E-87 | — | — | — |
| 14 | Spark out E | — | W32 | — | 0.5 | OEM-C175E-88 | — | — | — |
| 15 | Spark out C | — | W33 | — | 0.5 | OEM-C175E-89 | — | — | — |
| 16 | Spark out H | — | W34 | — | 0.5 | OEM-C175E-90 | — | — | — |
| 17 | Digital frequency in 2 (Hall) | — | W28 | — | 0.5 | OEM-C175E-42 | — | — | — |
| 18 | Ground Shield Drain | — | — | — | — | — | — | — | — |
| 19 | Digital switched 12V in | — | — | — | — | — | — | — | — |
| 2 | Injector out B | — | W45 | — | 0.5 | OEM-C175E-61 | — | — | — |
| 20 | Digital switched in 2 | — | W67 | — | 0.5 | OEM-C175E-48 | — | — | — |
| 21 | Digital frequency in 3 (unconditioned) | — | — | — | — | — | — | — | — |
| 22 | Digital Frequency in 3 (VR+) | — | — | — | — | — | — | — | — |
| 23 | Digital Frequency In 3 (VR−) | — | — | — | — | — | — | — | — |
| 24 | Spark out F | — | W35 | — | 0.5 | OEM-C175E-92 | — | — | — |
| 25 | Spark out B | — | W36 | — | 0.5 | OEM-C175E-93 | — | — | — |
| 26 | Spark out D | — | W37 | — | 0.5 | OEM-C175E-94 | — | — | — |
| 27 | Spark out A | — | W38 | — | 0.5 | OEM-C175E-95 | — | — | — |
| 28 | Digital frequency in 1 (unconditioned) | — | W27 | — | 0.5 | OEM-C175E-41 | — | — | — |
| 29 | Digital switched in 3 | — | W68 | — | 0.5 | OEM-C175E-57 | — | — | — |
| 3 | Ground | — | — | — | — | — | — | — | — |
| 30 | Stepper IAC out 1B | — | W48 | — | 0.5 | OEM-C175E-82 | — | — | — |
| 31 | Stepper IAC out 1A | — | W47 | — | 0.5 | OEM-C175E-81 | — | — | — |
| 32 | Stepper IAC out 2A | — | — | — | — | — | — | — | — |
| 33 | Stepper IAC out 2B | — | — | — | — | — | — | — | — |
| 34 | Digital Frequency in 1 (VR+) | — | W25 | — | 0.5 | OEM-C175E-56 | — | — | — |
| 35 | Digital Frequency in 1 (VR−) | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | Injector out C | — | W46 | — | 0.5 | OEM-C175E-16 | — | — | — |
| 5 | Ground | — | — | — | — | — | — | — | — |
| 6 | Injector out D | — | — | — | — | — | — | — | — |
| 7 | Ground | — | — | — | — | — | — | — | — |
| 8 | Injector out E | — | — | — | — | — | — | — | — |
| 9 | Ground | — | — | — | — | — | — | — | — |
MS3PROEVO-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | PWM out 5 | — | W57 | — | 0.5 | OEM-C175E-7 | — | — | — |
| 10 | Digital switched in 5 | — | — | — | — | — | — | — | — |
| 11 | Digital switched in 4 | — | — | — | — | — | — | — | — |
| 12 | Digital I/O 5 | — | — | — | — | — | — | — | — |
| 13 | Digital I/O 3 | — | — | — | — | — | — | — | — |
| 14 | Digital I/O 1 | — | — | — | — | — | — | — | — |
| 15 | 5V+ VREF out 2 | — | — | — | — | — | — | — | — |
| 17 | Sensor return | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Sensor return | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Sensor return | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | PWM out 4 | — | W56 | — | 0.5 | OEM-C175E-4 | — | — | — |
| 20 | Sensor return | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Sensor return | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | 5V+ VREF out 1 | — | — | — | — | — | — | — | — |
| 3 | Digital out 2 | — | W54 | — | 0.5 | OEM-C175E-84 | — | — | — |
| 4 | Digital out 1 | — | W52 | — | 0.5 | OEM-C175E-79 | — | — | — |
| 5 | Digital I/O 4 | — | — | — | — | — | — | — | — |
| 6 | Digital I/O 2 | — | — | — | — | — | — | — | — |
| 7 | Analog in 8 | — | — | — | — | — | — | — | — |
OEM-C175E
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Fuel injector driver 1 (INJ 1) | — | W39 | — | 0.5 | MS3PROEVO-A-3 | — | — | — |
| 2 | Fuel injector driver 5 (INJ 5) | — | W43 | — | 0.5 | MS3PROEVO-B-11 | — | — | — |
| 3 | Fuel injector driver 4 (INJ 4) | — | W42 | — | 0.5 | MS3PROEVO-B-10 | — | — | — |
| 4 | Variable camshaft timing valve 2 (VCT2) | — | W56 | — | 0.5 | MS3PROEVO-C-2 | — | — | — |
| 5 | Variable camshaft timing valve 1 (VCT1) | — | W55 | — | 0.5 | MS3PROEVO-A-30 | — | — | — |
| 6 | Variable camshaft timing valve 4 (VCT4) | — | W58 | — | 0.5 | MS3PROEVO-A-1 | — | — | — |
| 7 | Variable camshaft timing valve 3 (VCT3) | — | W57 | — | 0.5 | MS3PROEVO-C-1 | — | — | — |
| 8 | Electronic throttle control reference (ETCREF) | — | W19 | — | 0.5 | SP-5V1-1 | — | — | — |
| 9 | Throttle position positive slope (TP2-PS) | — | W62 | — | 0.5 | MS3PROEVO-A-20 | — | — | — |
| 10 | Throttle position negative slope (TP1-NS) | — | W61 | — | 0.5 | MS3PROEVO-A-9 | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | — | — | — | — | — | — | — | — | — |
| 13 | — | — | — | — | — | — | — | — | — |
| 14 | — | — | — | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — | — | — | — |
| 16 | Fuel injector driver 8 (INJ 8) | — | W46 | — | 0.5 | MS3PROEVO-B-4 | — | — | — |
| 17 | Buffered power supply sensors (VBPWR) | — | W17 | — | 0.5 | SP-5V1-1 | — | — | — |
| 18 | PCM power feed (VPWR, fused) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 19 | — | — | — | — | — | — | — | — | — |
| 20 | Universal HEGO 1st reference (UREF-11) | — | — | — | — | — | — | — | — |
| 21 | Universal HEGO 2nd reference (UREF-21) | — | — | — | — | — | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | Electronic throttle control return (ETCRTN) | — | W3 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
| 25 | — | — | — | — | — | — | — | — | — |
| 26 | — | — | — | — | — | — | — | — | — |
| 27 | Intake air temperature (IAT) | — | W63 | — | 0.5 | MS3PROEVO-A-10 | — | — | — |
| 28 | — | — | — | — | — | — | — | — | — |
| 29 | — | — | — | — | — | — | — | — | — |
| 30 | Engine oil level switch (EOL) | — | W66 | — | 0.5 | MS3PROEVO-A-32 | — | — | — |
| 31 | Fuel injector driver 6 (INJ 6) | — | W44 | — | 0.5 | MS3PROEVO-B-12 | — | — | — |
| 32 | — | — | — | — | — | — | — | — | — |
| 33 | — | — | — | — | — | — | — | — | — |
| 34 | Voltage reference engine (VREF) | — | W18 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Universal HEGO 1st pump current (UO2SIP-11) | — | — | — | — | — | — | — | — |
| 36 | Universal HEGO 2nd pump current (UO2SIP-21) | — | — | — | — | — | — | — | — |
| 37 | — | — | — | — | — | — | — | — | — |
| 38 | — | — | — | — | — | — | — | — | — |
| 39 | Crankshaft sensor shield/drain | — | W49 | — | 0.5 | SP-SHD-1 | — | — | — |
| 40 | VR sensor return (VRSRTN) | — | W4 | — | 0.5 | SP-0V-1 | — | — | — |
| 41 | Camshaft position bank 2 (CMP2) | — | W27 | — | 0.5 | MS3PROEVO-B-28 | — | — | — |
| 42 | Camshaft position bank 2 exhaust (CMP2 EX) | — | W28 | — | 0.5 | MS3PROEVO-B-17 | — | — | — |
| 43 | — | — | — | — | — | — | — | — | — |
| 44 | Intake manifold monitor (IMM) | — | W60 | — | 0.5 | MS3PROEVO-A-19 | — | — | — |
| 45 | Intake port deactivation valve position | — | W65 | — | 0.5 | MS3PROEVO-A-21 | — | — | — |
| 46 | Fuel injector driver 3 (INJ 3) | — | W41 | — | 0.5 | MS3PROEVO-B-1 | — | — | — |
| 47 | Cylinder head temperature (CHT) | — | W64 | — | 0.5 | MS3PROEVO-A-11 | — | — | — |
| 48 | Oil pressure switch | — | W67 | — | 0.5 | MS3PROEVO-B-20 | — | — | — |
| 49 | Signal return engine #2 | — | W5 | — | 0.5 | SP-0V-1 | — | — | — |
| 50 | Universal HEGO 1st sense (UO2SN-11) | — | — | — | — | — | — | — | — |
| 51 | Universal HEGO 2nd sense (UO2SN-21) | — | — | — | — | — | — | — | — |
| 52 | Knock sensor 1 bank 1 return (KS1−) | — | W6 | — | 0.5 | SP-0V-1 | — | — | — |
| 53 | Knock sensor 1 bank 1 signal (KS1+) | — | W29 | — | 0.5 | MS3PROEVO-A-31 | — | — | — |
| 54 | VR sensor return (VRSRTN) | — | W7 | — | 0.5 | SP-0V-1 | — | — | — |
| 55 | Camshaft position bank 1 (CMP1) | — | W23 | — | 0.5 | MS3PROEVO-A-26 | — | — | — |
| 56 | Camshaft position bank 1 exhaust (CMP1 EX) | — | W25 | — | 0.5 | MS3PROEVO-B-34 | — | — | — |
| 57 | Oil pressure switch (MTX) | — | W68 | — | 0.5 | MS3PROEVO-B-29 | — | — | — |
| 58 | — | — | — | — | — | — | — | — | — |
| 59 | Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD) | — | — | — | — | — | — | — | — |
| 60 | IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD) | — | — | — | — | — | — | — | — |
| 61 | Fuel injector driver 7 (INJ 7) | — | W45 | — | 0.5 | MS3PROEVO-B-2 | — | — | — |
| 62 | Fuel injector driver 2 (INJ 2) | — | W40 | — | 0.5 | MS3PROEVO-A-4 | — | — | — |
| 63 | — | — | — | — | — | — | — | — | — |
| 64 | — | — | — | — | — | — | — | — | — |
| 65 | — | — | — | — | — | — | — | — | — |
| 66 | — | — | — | — | — | — | — | — | — |
| 67 | Knock sensor 2 bank 1 return (KS2−) | — | W8 | — | 0.5 | SP-0V-1 | — | — | — |
| 68 | Knock sensor 2 bank 1 signal (KS2+) | — | W30 | — | 0.5 | MS3PROEVO-A-7 | — | — | — |
| 69 | Crankshaft position return (CKP−) | — | W9 | — | 0.5 | SP-0V-1 | — | — | — |
| 70 | Crankshaft position (CKP+) | — | W21 | — | 0.5 | MS3PROEVO-A-6 | — | — | — |
| 71 | Canister purge valve (CANP) | — | W59 | — | 0.5 | MS3PROEVO-A-2 | — | — | — |
| 72 | — | — | — | — | — | — | — | — | — |
| 73 | — | — | — | — | — | — | — | — | — |
| 74 | — | — | — | — | — | — | — | — | — |
| 75 | — | — | — | — | — | — | — | — | — |
| 76 | — | — | — | — | — | — | — | — | — |
| 77 | — | — | — | — | — | — | — | — | — |
| 78 | Heater O2 post-cat 1st (HTR12) | — | W51 | — | 0.5 | MS3PROEVO-A-14 | — | — | — |
| 79 | Heater O2 pre-cat 1st (HTR11) | — | W52 | — | 0.5 | MS3PROEVO-C-4 | — | — | — |
| 80 | — | — | — | — | — | — | — | — | — |
| 81 | Throttle actuator control motor − (TACM−) | — | W47 | — | 0.5 | MS3PROEVO-B-31 | — | — | — |
| 82 | Throttle actuator control motor + (TACM+) | — | W48 | — | 0.5 | MS3PROEVO-B-30 | — | — | — |
| 83 | Heater O2 post-cat 2nd (HTR22) | — | W53 | — | 0.5 | MS3PROEVO-A-29 | — | — | — |
| 84 | Heater O2 pre-cat 2nd (HTR21) | — | W54 | — | 0.5 | MS3PROEVO-C-3 | — | — | — |
| 85 | — | — | — | — | — | — | — | — | — |
| 86 | — | — | — | — | — | — | — | — | — |
| 87 | Ignition coil on plug G (COP-G) | — | W31 | — | 0.5 | MS3PROEVO-B-13 | — | — | — |
| 88 | Ignition coil on plug F (COP-F) | — | W32 | — | 0.5 | MS3PROEVO-B-14 | — | — | — |
| 89 | Ignition coil on plug E (COP-E) | — | W33 | — | 0.5 | MS3PROEVO-B-15 | — | — | — |
| 90 | Ignition coil on plug H (COP-H) | — | W34 | — | 0.5 | MS3PROEVO-B-16 | — | — | — |
| 91 | — | — | — | — | — | — | — | — | — |
| 92 | Ignition coil on plug D (COP-D) | — | W35 | — | 0.5 | MS3PROEVO-B-24 | — | — | — |
| 93 | Ignition coil on plug A (COP-A) | — | W36 | — | 0.5 | MS3PROEVO-B-25 | — | — | — |
| 94 | Ignition coil on plug C (COP-C) | — | W37 | — | 0.5 | MS3PROEVO-B-26 | — | — | — |
| 95 | Ignition coil on plug B (COP-B) | — | W38 | — | 0.5 | MS3PROEVO-B-27 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.5 | MS3PROEVO-A-13 | — | — | — |
| 1 | — | — | W3 | — | 0.5 | OEM-C175E-23 | — | — | — |
| 1 | — | — | W4 | — | 0.5 | OEM-C175E-40 | — | — | — |
| 1 | — | — | W5 | — | 0.5 | OEM-C175E-49 | — | — | — |
| 1 | — | — | W6 | — | 0.5 | OEM-C175E-52 | — | — | — |
| 1 | — | — | W7 | — | 0.5 | OEM-C175E-54 | — | — | — |
| 1 | — | — | W8 | — | 0.5 | OEM-C175E-67 | — | — | — |
| 1 | — | — | W9 | — | 0.5 | OEM-C175E-69 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | MS3PROEVO-A-18 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | MS3PROEVO-C-17 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | MS3PROEVO-C-18 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | MS3PROEVO-C-19 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | MS3PROEVO-C-20 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | MS3PROEVO-C-21 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | MS3PROEVO-A-15 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | MS3PROEVO-A-27 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | MS3PROEVO-B-35 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-C175E-18 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | MS3PROEVO-A-35 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W17 | — | 0.5 | OEM-C175E-17 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-C175E-34 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-C175E-8 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | MS3PROEVO-A-8 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W49 | — | 0.5 | OEM-C175E-39 | — | — | — |
| 1 | — | — | W50 | — | 0.5 | MS3PROEVO-A-16 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-C175E-1 | Fuel injector driver 1 (INJ 1) | injector_out | MS3PROEVO-A-3 | Injector out J | injector_out | corroborated | |
| OEM-C175E-10 | Throttle position negative slope (TP1-NS) | analog_in | MS3PROEVO-A-9 | TPS in | analog_in | corroborated | |
| OEM-C175E-16 | Fuel injector driver 8 (INJ 8) | injector_out | MS3PROEVO-B-4 | Injector out C | injector_out | corroborated | |
| OEM-C175E-17 | Buffered power supply sensors (VBPWR) | vref | MS3PROEVO-A-8 | 5V+ VREF out | vref | corroborated | |
| OEM-C175E-18 | PCM power feed (VPWR, fused) | power_in | MS3PROEVO-A-35 | 12V+ switched power in | power_in | corroborated | |
| OEM-C175E-2 | Fuel injector driver 5 (INJ 5) | injector_out | MS3PROEVO-B-11 | Injector out G | injector_out | corroborated | |
| OEM-C175E-20 | Universal HEGO 1st reference (UREF-11) | wb_vgnd | — | — | — | corroborated | |
| OEM-C175E-21 | Universal HEGO 2nd reference (UREF-21) | wb_vgnd | — | — | — | corroborated | |
| OEM-C175E-23 | Electronic throttle control return (ETCRTN) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-B-35 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Digital Frequency in 1 (VR−) + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | digital_in + sensor_ground + trigger_in | corroborated | |
| OEM-C175E-27 | Intake air temperature (IAT) | temp_in | MS3PROEVO-A-10 | MAT in | temp_in | corroborated | |
| OEM-C175E-3 | Fuel injector driver 4 (INJ 4) | injector_out | MS3PROEVO-B-10 | Injector out F | injector_out | corroborated | |
| OEM-C175E-30 | Engine oil level switch (EOL) | digital_in | MS3PROEVO-A-32 | Digital switched in 1 | digital_in | corroborated | |
| OEM-C175E-31 | Fuel injector driver 6 (INJ 6) | injector_out | MS3PROEVO-B-12 | Injector out H | injector_out | corroborated | |
| OEM-C175E-34 | Voltage reference engine (VREF) | vref | MS3PROEVO-A-8 | 5V+ VREF out | vref | corroborated | |
| OEM-C175E-35 | Universal HEGO 1st pump current (UO2SIP-11) | wb_ip | — | — | — | corroborated | |
| OEM-C175E-36 | Universal HEGO 2nd pump current (UO2SIP-21) | wb_ip | — | — | — | corroborated | |
| OEM-C175E-39 | Crankshaft sensor shield/drain | shield | MS3PROEVO-A-16 | Ground Shield Drain | shield | corroborated | |
| OEM-C175E-4 | Variable camshaft timing valve 2 (VCT2) | low_side_out | MS3PROEVO-C-2 | PWM out 4 | low_side_out | corroborated | |
| OEM-C175E-40 | VR sensor return (VRSRTN) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-B-35 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Digital Frequency in 1 (VR−) + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | digital_in + sensor_ground + trigger_in | corroborated | |
| OEM-C175E-41 | Camshaft position bank 2 (CMP2) | trigger_in | MS3PROEVO-B-28 | Digital frequency in 1 (unconditioned) | digital_in | corroborated | |
| OEM-C175E-42 | Camshaft position bank 2 exhaust (CMP2 EX) | trigger_in | MS3PROEVO-B-17 | Digital frequency in 2 (Hall) | digital_in | corroborated | |
| OEM-C175E-44 | Intake manifold monitor (IMM) | analog_in | MS3PROEVO-A-19 | Analog in 1 | analog_in | corroborated | |
| OEM-C175E-45 | Intake port deactivation valve position | analog_in | MS3PROEVO-A-21 | Analog in 3 | analog_in | corroborated | |
| OEM-C175E-46 | Fuel injector driver 3 (INJ 3) | injector_out | MS3PROEVO-B-1 | Injector out A | injector_out | corroborated | |
| OEM-C175E-47 | Cylinder head temperature (CHT) | temp_in | MS3PROEVO-A-11 | CLT in | temp_in | corroborated | |
| OEM-C175E-48 | Oil pressure switch | digital_in | MS3PROEVO-B-20 | Digital switched in 2 | digital_in | corroborated | |
| OEM-C175E-49 | Signal return engine #2 | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-B-35 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Digital Frequency in 1 (VR−) + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | digital_in + sensor_ground + trigger_in | corroborated | |
| OEM-C175E-5 | Variable camshaft timing valve 1 (VCT1) | low_side_out | MS3PROEVO-A-30 | PWM out 3 | low_side_out | corroborated | |
| OEM-C175E-50 | Universal HEGO 1st sense (UO2SN-11) | wb_vs | — | — | — | corroborated | |
| OEM-C175E-51 | Universal HEGO 2nd sense (UO2SN-21) | wb_vs | — | — | — | corroborated | |
| OEM-C175E-52 | Knock sensor 1 bank 1 return (KS1−) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-B-35 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Digital Frequency in 1 (VR−) + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | digital_in + sensor_ground + trigger_in | corroborated | |
| OEM-C175E-53 | Knock sensor 1 bank 1 signal (KS1+) | knock_in | MS3PROEVO-A-31 | Knock in 1 | knock_in | corroborated | |
| OEM-C175E-54 | VR sensor return (VRSRTN) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-B-35 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Digital Frequency in 1 (VR−) + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | digital_in + sensor_ground + trigger_in | corroborated | |
| OEM-C175E-55 | Camshaft position bank 1 (CMP1) | trigger_in | MS3PROEVO-A-26 | CMP+ | trigger_in | corroborated | |
| OEM-C175E-56 | Camshaft position bank 1 exhaust (CMP1 EX) | trigger_in | MS3PROEVO-B-34 | Digital Frequency in 1 (VR+) | digital_in | corroborated | |
| OEM-C175E-57 | Oil pressure switch (MTX) | digital_in | MS3PROEVO-B-29 | Digital switched in 3 | digital_in | corroborated | |
| OEM-C175E-59 | Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD) | — | — | — | — | corroborated | |
| OEM-C175E-6 | Variable camshaft timing valve 4 (VCT4) | low_side_out | MS3PROEVO-A-1 | High current out 1 | low_side_out | corroborated | |
| OEM-C175E-60 | IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD) | — | — | — | — | corroborated | |
| OEM-C175E-61 | Fuel injector driver 7 (INJ 7) | injector_out | MS3PROEVO-B-2 | Injector out B | injector_out | corroborated | |
| OEM-C175E-62 | Fuel injector driver 2 (INJ 2) | injector_out | MS3PROEVO-A-4 | Injector out I | injector_out | corroborated | |
| OEM-C175E-67 | Knock sensor 2 bank 1 return (KS2−) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-B-35 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Digital Frequency in 1 (VR−) + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | digital_in + sensor_ground + trigger_in | corroborated | |
| OEM-C175E-68 | Knock sensor 2 bank 1 signal (KS2+) | knock_in | MS3PROEVO-A-7 | Knock In 2 | knock_in | corroborated | |
| OEM-C175E-69 | Crankshaft position return (CKP−) | sensor_ground | MS3PROEVO-A-13 + MS3PROEVO-A-15 + MS3PROEVO-A-18 + MS3PROEVO-A-27 + MS3PROEVO-B-35 + MS3PROEVO-C-17 + MS3PROEVO-C-18 + MS3PROEVO-C-19 + MS3PROEVO-C-20 + MS3PROEVO-C-21 | Logic Ground + CKP− + Sensor return + CMP− + Digital Frequency in 1 (VR−) + Sensor return + Sensor return + Sensor return + Sensor return + Sensor return | digital_in + sensor_ground + trigger_in | corroborated | |
| OEM-C175E-7 | Variable camshaft timing valve 3 (VCT3) | low_side_out | MS3PROEVO-C-1 | PWM out 5 | low_side_out | corroborated | |
| OEM-C175E-70 | Crankshaft position (CKP+) | trigger_in | MS3PROEVO-A-6 | CKP+ | trigger_in | corroborated | |
| OEM-C175E-71 | Canister purge valve (CANP) | low_side_out | MS3PROEVO-A-2 | High current out 2 | low_side_out | corroborated | |
| OEM-C175E-78 | Heater O2 post-cat 1st (HTR12) | low_side_out | MS3PROEVO-A-14 | PWM / Idle Out 1 | low_side_out | corroborated | |
| OEM-C175E-79 | Heater O2 pre-cat 1st (HTR11) | low_side_out | MS3PROEVO-C-4 | Digital out 1 | low_side_out | corroborated | |
| OEM-C175E-8 | Electronic throttle control reference (ETCREF) | vref | MS3PROEVO-A-8 | 5V+ VREF out | vref | corroborated | |
| OEM-C175E-81 | Throttle actuator control motor − (TACM−) | hbridge_out | MS3PROEVO-B-31 | Stepper IAC out 1A | hbridge_out | corroborated | |
| OEM-C175E-82 | Throttle actuator control motor + (TACM+) | hbridge_out | MS3PROEVO-B-30 | Stepper IAC out 1B | hbridge_out | corroborated | |
| OEM-C175E-83 | Heater O2 post-cat 2nd (HTR22) | low_side_out | MS3PROEVO-A-29 | PWM out 2 | low_side_out | corroborated | |
| OEM-C175E-84 | Heater O2 pre-cat 2nd (HTR21) | low_side_out | MS3PROEVO-C-3 | Digital out 2 | low_side_out | corroborated | |
| OEM-C175E-87 | Ignition coil on plug G (COP-G) | ignition_out | MS3PROEVO-B-13 | Spark out G | ignition_out | corroborated | |
| OEM-C175E-88 | Ignition coil on plug F (COP-F) | ignition_out | MS3PROEVO-B-14 | Spark out E | ignition_out | corroborated | |
| OEM-C175E-89 | Ignition coil on plug E (COP-E) | ignition_out | MS3PROEVO-B-15 | Spark out C | ignition_out | corroborated | |
| OEM-C175E-9 | Throttle position positive slope (TP2-PS) | analog_in | MS3PROEVO-A-20 | Analog in 2 | analog_in | corroborated | |
| OEM-C175E-90 | Ignition coil on plug H (COP-H) | ignition_out | MS3PROEVO-B-16 | Spark out H | ignition_out | corroborated | |
| OEM-C175E-92 | Ignition coil on plug D (COP-D) | ignition_out | MS3PROEVO-B-24 | Spark out F | ignition_out | corroborated | |
| OEM-C175E-93 | Ignition coil on plug A (COP-A) | ignition_out | MS3PROEVO-B-25 | Spark out B | ignition_out | corroborated | |
| OEM-C175E-94 | Ignition coil on plug C (COP-C) | ignition_out | MS3PROEVO-B-26 | Spark out D | ignition_out | corroborated | |
| OEM-C175E-95 | Ignition coil on plug B (COP-B) | ignition_out | MS3PROEVO-B-27 | Spark out A | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-C175E-18 | SP-14V-1 | 0.85 | no route | PCM power feed (VPWR, fused) | — | |
| W2 | SP-14V-1 | MS3PROEVO-A-35 | 0.85 | no route | 12V+ switched power in | — | |
| W3 | OEM-C175E-23 | SP-0V-1 | 0.5 | no route | Electronic throttle control return (ETCRTN) | — | |
| W4 | OEM-C175E-40 | SP-0V-1 | 0.5 | no route | VR sensor return (VRSRTN) | — | |
| W5 | OEM-C175E-49 | SP-0V-1 | 0.5 | no route | Signal return engine #2 | — | |
| W6 | OEM-C175E-52 | SP-0V-1 | 0.5 | no route | Knock sensor 1 bank 1 return (KS1−) | — | |
| W7 | OEM-C175E-54 | SP-0V-1 | 0.5 | no route | VR sensor return (VRSRTN) | — | |
| W8 | OEM-C175E-67 | SP-0V-1 | 0.5 | no route | Knock sensor 2 bank 1 return (KS2−) | — | |
| W9 | OEM-C175E-69 | SP-0V-1 | 0.5 | no route | Crankshaft position return (CKP−) | — | |
| W10 | SP-0V-1 | MS3PROEVO-A-13 | 0.5 | no route | Logic Ground | — | |
| W11 | SP-0V-1 | MS3PROEVO-A-18 | 0.5 | no route | Sensor return | — | |
| W12 | SP-0V-1 | MS3PROEVO-C-17 | 0.5 | no route | Sensor return | — | |
| W13 | SP-0V-1 | MS3PROEVO-C-18 | 0.5 | no route | Sensor return | — | |
| W14 | SP-0V-1 | MS3PROEVO-C-19 | 0.5 | no route | Sensor return | — | |
| W15 | SP-0V-1 | MS3PROEVO-C-20 | 0.5 | no route | Sensor return | — | |
| W16 | SP-0V-1 | MS3PROEVO-C-21 | 0.5 | no route | Sensor return | — | |
| W17 | OEM-C175E-17 | SP-5V1-1 | 0.5 | no route | Buffered power supply sensors (VBPWR) | — | |
| W18 | OEM-C175E-34 | SP-5V1-1 | 0.5 | no route | Voltage reference engine (VREF) | — | |
| W19 | OEM-C175E-8 | SP-5V1-1 | 0.5 | no route | Electronic throttle control reference (ETCREF) | — | |
| W20 | SP-5V1-1 | MS3PROEVO-A-8 | 0.5 | no route | 5V+ VREF out | — | |
| W21 | OEM-C175E-70 | MS3PROEVO-A-6 | 0.5 | no route | Crankshaft position (CKP+) | — | |
| W22 | SP-0V-1 | MS3PROEVO-A-15 | 0.5 | no route | CKP− | — | |
| W23 | OEM-C175E-55 | MS3PROEVO-A-26 | 0.5 | no route | Camshaft position bank 1 (CMP1) | — | |
| W24 | SP-0V-1 | MS3PROEVO-A-27 | 0.5 | no route | CMP− | — | |
| W25 | OEM-C175E-56 | MS3PROEVO-B-34 | 0.5 | no route | Camshaft position bank 1 exhaust (CMP1 EX) | — | |
| W26 | SP-0V-1 | MS3PROEVO-B-35 | 0.5 | no route | Digital Frequency in 1 (VR−) | — | |
| W27 | OEM-C175E-41 | MS3PROEVO-B-28 | 0.5 | no route | Camshaft position bank 2 (CMP2) | — | |
| W28 | OEM-C175E-42 | MS3PROEVO-B-17 | 0.5 | no route | Camshaft position bank 2 exhaust (CMP2 EX) | — | |
| W29 | OEM-C175E-53 | MS3PROEVO-A-31 | 0.5 | no route | Knock sensor 1 bank 1 signal (KS1+) | — | |
| W30 | OEM-C175E-68 | MS3PROEVO-A-7 | 0.5 | no route | Knock sensor 2 bank 1 signal (KS2+) | — | |
| W31 | OEM-C175E-87 | MS3PROEVO-B-13 | 0.5 | no route | Ignition coil on plug G (COP-G) | — | |
| W32 | OEM-C175E-88 | MS3PROEVO-B-14 | 0.5 | no route | Ignition coil on plug F (COP-F) | — | |
| W33 | OEM-C175E-89 | MS3PROEVO-B-15 | 0.5 | no route | Ignition coil on plug E (COP-E) | — | |
| W34 | OEM-C175E-90 | MS3PROEVO-B-16 | 0.5 | no route | Ignition coil on plug H (COP-H) | — | |
| W35 | OEM-C175E-92 | MS3PROEVO-B-24 | 0.5 | no route | Ignition coil on plug D (COP-D) | — | |
| W36 | OEM-C175E-93 | MS3PROEVO-B-25 | 0.5 | no route | Ignition coil on plug A (COP-A) | — | |
| W37 | OEM-C175E-94 | MS3PROEVO-B-26 | 0.5 | no route | Ignition coil on plug C (COP-C) | — | |
| W38 | OEM-C175E-95 | MS3PROEVO-B-27 | 0.5 | no route | Ignition coil on plug B (COP-B) | — | |
| W39 | OEM-C175E-1 | MS3PROEVO-A-3 | 0.5 | no route | Fuel injector driver 1 (INJ 1) | — | |
| W40 | OEM-C175E-62 | MS3PROEVO-A-4 | 0.5 | no route | Fuel injector driver 2 (INJ 2) | — | |
| W41 | OEM-C175E-46 | MS3PROEVO-B-1 | 0.5 | no route | Fuel injector driver 3 (INJ 3) | — | |
| W42 | OEM-C175E-3 | MS3PROEVO-B-10 | 0.5 | no route | Fuel injector driver 4 (INJ 4) | — | |
| W43 | OEM-C175E-2 | MS3PROEVO-B-11 | 0.5 | no route | Fuel injector driver 5 (INJ 5) | — | |
| W44 | OEM-C175E-31 | MS3PROEVO-B-12 | 0.5 | no route | Fuel injector driver 6 (INJ 6) | — | |
| W45 | OEM-C175E-61 | MS3PROEVO-B-2 | 0.5 | no route | Fuel injector driver 7 (INJ 7) | — | |
| W46 | OEM-C175E-16 | MS3PROEVO-B-4 | 0.5 | no route | Fuel injector driver 8 (INJ 8) | — | |
| W47 | OEM-C175E-81 | MS3PROEVO-B-31 | 0.5 | no route | Throttle actuator control motor − (TACM−) | — | |
| W48 | OEM-C175E-82 | MS3PROEVO-B-30 | 0.5 | no route | Throttle actuator control motor + (TACM+) | — | |
| W49 | OEM-C175E-39 | SP-SHD-1 | 0.5 | no route | Crankshaft sensor shield/drain | — | |
| W50 | SP-SHD-1 | MS3PROEVO-A-16 | 0.5 | no route | Ground Shield Drain | — | |
| W51 | OEM-C175E-78 | MS3PROEVO-A-14 | 0.5 | no route | Heater O2 post-cat 1st (HTR12) | — | |
| W52 | OEM-C175E-79 | MS3PROEVO-C-4 | 0.5 | no route | Heater O2 pre-cat 1st (HTR11) | — | |
| W53 | OEM-C175E-83 | MS3PROEVO-A-29 | 0.5 | no route | Heater O2 post-cat 2nd (HTR22) | — | |
| W54 | OEM-C175E-84 | MS3PROEVO-C-3 | 0.5 | no route | Heater O2 pre-cat 2nd (HTR21) | — | |
| W55 | OEM-C175E-5 | MS3PROEVO-A-30 | 0.5 | no route | Variable camshaft timing valve 1 (VCT1) | — | |
| W56 | OEM-C175E-4 | MS3PROEVO-C-2 | 0.5 | no route | Variable camshaft timing valve 2 (VCT2) | — | |
| W57 | OEM-C175E-7 | MS3PROEVO-C-1 | 0.5 | no route | Variable camshaft timing valve 3 (VCT3) | — | |
| W58 | OEM-C175E-6 | MS3PROEVO-A-1 | 0.5 | no route | Variable camshaft timing valve 4 (VCT4) | — | |
| W59 | OEM-C175E-71 | MS3PROEVO-A-2 | 0.5 | no route | Canister purge valve (CANP) | — | |
| W60 | OEM-C175E-44 | MS3PROEVO-A-19 | 0.5 | no route | Intake manifold monitor (IMM) | — | |
| W61 | OEM-C175E-10 | MS3PROEVO-A-9 | 0.5 | no route | Throttle position negative slope (TP1-NS) | — | |
| W62 | OEM-C175E-9 | MS3PROEVO-A-20 | 0.5 | no route | Throttle position positive slope (TP2-PS) | — | |
| W63 | OEM-C175E-27 | MS3PROEVO-A-10 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W64 | OEM-C175E-47 | MS3PROEVO-A-11 | 0.5 | no route | Cylinder head temperature (CHT) | — | |
| W65 | OEM-C175E-45 | MS3PROEVO-A-21 | 0.5 | no route | Intake port deactivation valve position | — | |
| W66 | OEM-C175E-30 | MS3PROEVO-A-32 | 0.5 | no route | Engine oil level switch (EOL) | — | |
| W67 | OEM-C175E-48 | MS3PROEVO-B-20 | 0.5 | no route | Oil pressure switch | — | |
| W68 | OEM-C175E-57 | MS3PROEVO-B-29 | 0.5 | no route | Oil pressure switch (MTX) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | COYOTE-PCM-A | — | 2011–14 Mustang GT PCM 70-way connector C175E (housing P/N unknown) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (15)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_MOTOR_DRIVE | throttle motor | This car has an electronic throttle, but no throttle-motor pins were found in the harness. Wire the motor to an H-bridge on the ECU, or switch to the cable-conversion variant. |
| error | DBW_SENSOR_INPUT | pedal | Only 0 pedal track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | DBW_SENSOR_INPUT | tps | Only 0 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | PHYS_REQUIRED_OPEN | MS3PROEVO-B-3 | MS3PROEVO-B-3 "Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | MS3PROEVO-B-5 | MS3PROEVO-B-5 "Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | MS3PROEVO-B-7 | MS3PROEVO-B-7 "Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | MS3PROEVO-B-9 | MS3PROEVO-B-9 "Ground" is required but not wired. |
| warn | DATASET_GAP | Mustang GT PCM C175E | 32 of 95 cavities on Mustang GT PCM C175E have no pin data (11,12,13,14,15,19,22,24,25,26,28,29,32,33,37,38,43,58,63,64,65,66,72,73,74,75,76,77,80,85,86,91). Anything there is invisible to these checks. |
| warn | NET_FAMILY | MS3PROEVO-A-15 ↔ MS3PROEVO-B-35 | MS3PROEVO-A-15 "CKP−" [trigger_in] is wired to MS3PROEVO-B-35 "Digital Frequency in 1 (VR−)" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-C175E-41 ↔ MS3PROEVO-B-28 | OEM-C175E-41 "Camshaft position bank 2 (CMP2)" [trigger_in] is wired to MS3PROEVO-B-28 "Digital frequency in 1 (unconditioned)" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-C175E-42 ↔ MS3PROEVO-B-17 | OEM-C175E-42 "Camshaft position bank 2 exhaust (CMP2 EX)" [trigger_in] is wired to MS3PROEVO-B-17 "Digital frequency in 2 (Hall)" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-C175E-56 ↔ MS3PROEVO-B-34 | OEM-C175E-56 "Camshaft position bank 1 exhaust (CMP1 EX)" [trigger_in] is wired to MS3PROEVO-B-34 "Digital Frequency in 1 (VR+)" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | MS3PROEVO-B-35 ↔ MS3PROEVO-C-20 | MS3PROEVO-B-35 "Digital Frequency in 1 (VR−)" [digital_in] is wired to MS3PROEVO-C-20 "Sensor return" [sensor_ground]. A digital input used as a ground/identification strap (e.g. AT/MT ID is grounded on manual cars) is compatible with a sensor ground. |
| info | NET_FAMILY | OEM-C175E-67 ↔ MS3PROEVO-A-27 | OEM-C175E-67 "Knock sensor 2 bank 1 return (KS2−)" [sensor_ground] is wired to MS3PROEVO-A-27 "CMP−" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-C175E-20 Universal HEGO 1st reference (UREF-11); OEM-C175E-21 Universal HEGO 2nd reference (UREF-21); OEM-C175E-35 Universal HEGO 1st pump current (UO2SIP-11); OEM-C175E-36 Universal HEGO 2nd pump current (UO2SIP-21); OEM-C175E-50 Universal HEGO 1st sense (UO2SN-11); OEM-C175E-51 Universal HEGO 2nd sense (UO2SN-21); OEM-C175E-59 Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD); OEM-C175E-60 IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD) |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Fit check: unconfirmed. Confirm these before building: - Needs CAN (ford_mustang_2011_14); not documented for this ECU - This car has PATS immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Open items: - MS3PROEVO-B 3: Ground: required by AMP EFI MS3Pro EVO+ but no stock pin feeds it; wire by hand - MS3PROEVO-B 5: Ground: required by AMP EFI MS3Pro EVO+ but no stock pin feeds it; wire by hand - MS3PROEVO-B 7: Ground: required by AMP EFI MS3Pro EVO+ but no stock pin feeds it; wire by hand - MS3PROEVO-B 9: Ground: required by AMP EFI MS3Pro EVO+ but no stock pin feeds it; wire by hand Not wired: - OEM-C175E 35: Universal HEGO 1st pump current (UO2SIP-11): no free wb_ip on AMP EFI MS3Pro EVO+ - OEM-C175E 36: Universal HEGO 2nd pump current (UO2SIP-21): no free wb_ip on AMP EFI MS3Pro EVO+ - OEM-C175E 50: Universal HEGO 1st sense (UO2SN-11): no free wb_vs on AMP EFI MS3Pro EVO+ - OEM-C175E 51: Universal HEGO 2nd sense (UO2SN-21): no free wb_vs on AMP EFI MS3Pro EVO+ - OEM-C175E 20: Universal HEGO 1st reference (UREF-11): no free wb_vgnd on AMP EFI MS3Pro EVO+ - OEM-C175E 21: Universal HEGO 2nd reference (UREF-21): no free wb_vgnd on AMP EFI MS3Pro EVO+ - OEM-C175E 59: Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD): not classified in the library; wire by hand - OEM-C175E 60: IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD): not classified in the library; wire by hand - MS3PROEVO-B 19: Digital switched 12V in: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | AMP EFI: MS3Pro EVO+ / EVO+ HC manual (fw 1.6.1) pinout tables | https://cdn.shopify.com/s/files/1/0960/0014/7754/files/MS3Pro_User_Manual_Firmware_1.6.1_EVO.pdf?v=1760643022 | archive | 2026-10-05 | d5dd8a31822d |
| 3 | community_copy | iihs.net: 2011 Mustang factory Wiring Diagrams (Cell 24 Electronic Engine Controls, 5.0L) | https://iihs.net/fsm/?d=711 | — | — | — |
| 2 | community_copy | rusEFI OEM-Docs: Coyote C175E pinout (Pin/Circuit/Gauge/Circuit Function/Qualifier) | https://raw.githubusercontent.com/rusefi/rusefi_documentation/master/OEM-Docs/Ford/Coyote-175e-pinout-B.png | — | — | — |