Mustang GT 2011–14 (Coyote 5.0) → Emtron KV16 (auto)
Mustang GT 2011–14 (Coyote 5.0) — Emtron — KV16
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-07
Before you start
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 12: read the Findings page before cutting any wire |
| Size of the job | 67 wires · 9 connectors · 6 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-C175E-18 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | SP-14V-1 | KV16-D-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | KV16-D-2 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | KV16-D-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-C175E-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-C175E-40 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-C175E-49 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-C175E-52 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-C175E-54 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-C175E-67 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-C175E-69 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-0V-1 | KV16-C-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-0V-1 | KV16-C-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-C175E-17 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-C175E-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-C175E-8 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-5V1-1 | KV16-D-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-C175E-70 | KV16-D-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | KV16-D-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-C175E-55 | KV16-D-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | KV16-D-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-C175E-53 | KV16-D-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-C175E-68 | KV16-D-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-C175E-87 | KV16-B-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-C175E-88 | KV16-B-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-C175E-89 | KV16-B-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-C175E-90 | KV16-B-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-C175E-92 | KV16-B-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-C175E-93 | KV16-B-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-C175E-94 | KV16-B-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-C175E-95 | KV16-B-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-C175E-1 | KV16-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-C175E-62 | KV16-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-C175E-46 | KV16-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-C175E-3 | KV16-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-C175E-2 | KV16-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-C175E-31 | KV16-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-C175E-61 | KV16-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-C175E-16 | KV16-B-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-C175E-81 | KV16-B-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-C175E-82 | KV16-B-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-C175E-39 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | SP-SHD-1 | KV16-D-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-C175E-78 | KV16-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-C175E-79 | KV16-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-C175E-83 | KV16-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-C175E-84 | KV16-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-C175E-5 | KV16-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-C175E-4 | KV16-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-C175E-7 | KV16-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-C175E-6 | KV16-B-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-C175E-71 | KV16-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-C175E-35 | KV16-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-C175E-36 | KV16-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-C175E-50 | KV16-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-C175E-51 | KV16-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-C175E-20 | KV16-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-C175E-21 | KV16-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-C175E-44 | KV16-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-C175E-10 | KV16-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-C175E-9 | KV16-C-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-C175E-27 | KV16-C-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-C175E-47 | KV16-C-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-C175E-45 | KV16-C-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-C175E-30 | KV16-C-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-C175E-48 | KV16-C-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-C175E-57 | KV16-C-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | KV16-D-1 | KV16-C-17 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | KV16-D-21 | KV16-C-17 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 3 | KV16-D-21 | KV16-D-1 | open (OL) | 5 V sensor reference must not touch +12 V supply |
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
KV16-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injection Channel 9 | — | — | — | — | — | — | — | — |
| 2 | Injection Channel 10 | — | — | — | — | — | — | — | — |
| 3 | Injection Channel 11 | — | — | — | — | — | — | — | — |
| 4 | Injection Channel 12 | — | — | — | — | — | — | — | — |
| 5 | Injection Channel 13 | — | — | — | — | — | — | — | — |
| 6 | Injection Channel 14 | — | — | — | — | — | — | — | — |
| 7 | Injection Channel 15 | — | — | — | — | — | — | — | — |
| 8 | Ignition Channel 9 | — | — | — | — | — | — | — | — |
| 9 | Ignition Channel 10 | — | — | — | — | — | — | — | — |
| 10 | Lambda 1 Heater - | — | W44 | — | 0.5 | OEM-C175E-78 | — | — | — |
| 11 | Lambda 2 Heater - | — | W45 | — | 0.5 | OEM-C175E-79 | — | — | — |
| 12 | Injection Channel 16 | — | — | — | — | — | — | — | — |
| 13 | ECU Ground | — | — | — | — | — | — | — | — |
| 14 | Ignition Channel 11 | — | — | — | — | — | — | — | — |
| 15 | Ignition Channel 12 | — | — | — | — | — | — | — | — |
| 16 | Lambda 1 Heater + | — | — | — | — | — | — | — | — |
| 17 | Lambda 2 Heater + | — | — | — | — | — | — | — | — |
| 18 | Lambda 1 Nernst Cell (Vs) | — | W55 | — | 0.5 | OEM-C175E-50 | — | — | — |
| 19 | ECU Ground | — | — | — | — | — | — | — | — |
| 20 | Lambda 2 Cal Resistor (CalR) | — | — | — | — | — | — | — | — |
| 21 | Lambda 2 Nernst Cell (Vs) | — | W56 | — | 0.5 | OEM-C175E-51 | — | — | — |
| 22 | Lambda 2 Pump Cell (Ip) | — | W54 | — | 0.5 | OEM-C175E-36 | — | — | — |
| 23 | Lambda 2 Virtual Ground (VGnd) | — | W58 | — | 0.5 | OEM-C175E-21 | — | — | — |
| 24 | Lambda 1 Cal Resistor (CalR) | — | — | — | — | — | — | — | — |
| 25 | Lambda 1 Pump Cell (Ip) | — | W53 | — | 0.5 | OEM-C175E-35 | — | — | — |
| 26 | Lambda 1 Virtual Ground (VGnd) | — | W57 | — | 0.5 | OEM-C175E-20 | — | — | — |
KV16-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injection Channel 1 | — | W32 | — | 0.5 | OEM-C175E-1 | — | — | — |
| 2 | Injection Channel 2 | — | W33 | — | 0.5 | OEM-C175E-62 | — | — | — |
| 3 | Injection Channel 3 | — | W34 | — | 0.5 | OEM-C175E-46 | — | — | — |
| 4 | Injection Channel 4 | — | W35 | — | 0.5 | OEM-C175E-3 | — | — | — |
| 5 | Injection Channel 5 | — | W36 | — | 0.5 | OEM-C175E-2 | — | — | — |
| 6 | Injection Channel 6 | — | W37 | — | 0.5 | OEM-C175E-31 | — | — | — |
| 7 | Injection Channel 7 | — | W38 | — | 0.5 | OEM-C175E-61 | — | — | — |
| 8 | Injection Channel 8 | — | W39 | — | 0.5 | OEM-C175E-16 | — | — | — |
| 9 | ECU Ground | — | — | — | — | — | — | — | — |
| 10 | Auxiliary Output 1 | — | W50 | — | 0.5 | OEM-C175E-7 | — | — | — |
| 11 | Auxiliary Output 2 | — | W51 | — | 0.5 | OEM-C175E-6 | — | — | — |
| 12 | Auxiliary Output 3 | — | W52 | — | 0.5 | OEM-C175E-71 | — | — | — |
| 13 | Auxiliary Output 4 | — | — | — | — | — | — | — | — |
| 14 | Auxiliary Output 5 | — | W46 | — | 0.5 | OEM-C175E-83 | — | — | — |
| 15 | Auxiliary Output 6 | — | W47 | — | 0.5 | OEM-C175E-84 | — | — | — |
| 16 | Auxiliary Output 7 | — | W48 | — | 0.5 | OEM-C175E-5 | — | — | — |
| 17 | Auxiliary Output 8 | — | W49 | — | 0.5 | OEM-C175E-4 | — | — | — |
| 18 | Auxiliary Output 9 | — | W41 | — | 0.5 | OEM-C175E-82 | — | — | — |
| 19 | Auxiliary Output 10 | — | W40 | — | 0.5 | OEM-C175E-81 | — | — | — |
| 20 | Auxiliary Output 11 | — | — | — | — | — | — | — | — |
| 21 | Auxiliary Output 12 | — | — | — | — | — | — | — | — |
| 22 | Auxiliary Output 13 | — | — | — | — | — | — | — | — |
| 23 | Auxiliary Output 14 | — | — | — | — | — | — | — | — |
| 24 | Auxiliary Output 15 | — | — | — | — | — | — | — | — |
| 25 | Auxiliary Output 16 | — | — | — | — | — | — | — | — |
| 26 | Ignition Channel 1 | — | W24 | — | 0.5 | OEM-C175E-87 | — | — | — |
| 27 | Ignition Channel 2 | — | W25 | — | 0.5 | OEM-C175E-88 | — | — | — |
| 28 | Ignition Channel 3 | — | W26 | — | 0.5 | OEM-C175E-89 | — | — | — |
| 29 | Ignition Channel 4 | — | W27 | — | 0.5 | OEM-C175E-90 | — | — | — |
| 30 | Ignition Channel 5 | — | W28 | — | 0.5 | OEM-C175E-92 | — | — | — |
| 31 | Ignition Channel 6 | — | W29 | — | 0.5 | OEM-C175E-93 | — | — | — |
| 32 | Ignition Channel 7 | — | W30 | — | 0.5 | OEM-C175E-94 | — | — | — |
| 33 | Ignition Channel 8 | — | W31 | — | 0.5 | OEM-C175E-95 | — | — | — |
| 34 | ECU Ground | — | — | — | — | — | — | — | — |
KV16-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU Ground | — | — | — | — | — | — | — | — |
| 2 | Analog Input Channel 1 | — | W59 | — | 0.5 | OEM-C175E-44 | — | — | — |
| 3 | Analog Input Channel 2 | — | W60 | — | 0.5 | OEM-C175E-10 | — | — | — |
| 4 | Analog Input Channel 3 | — | W61 | — | 0.5 | OEM-C175E-9 | — | — | — |
| 5 | Analog Input Channel 4 | — | W62 | — | 0.5 | OEM-C175E-27 | — | — | — |
| 6 | Analog Input Channel 5 | — | W63 | — | 0.5 | OEM-C175E-47 | — | — | — |
| 7 | Analog Input Channel 6 | — | W64 | — | 0.5 | OEM-C175E-45 | — | — | — |
| 8 | Analog Input Channel 7 | — | — | — | — | — | — | — | — |
| 9 | Analog Input Channel 8 | — | — | — | — | — | — | — | — |
| 10 | Analog Input Channel 9 | — | — | — | — | — | — | — | — |
| 11 | Analog Input Channel 10 | — | — | — | — | — | — | — | — |
| 12 | Analog Input Channel 11 | — | — | — | — | — | — | — | — |
| 13 | Analog Input Channel 12 | — | — | — | — | — | — | — | — |
| 14 | Analog Input Channel 13 | — | — | — | — | — | — | — | — |
| 15 | Analog Input Channel 14 | — | — | — | — | — | — | — | — |
| 16 | Analog Input Channel 15 | — | — | — | — | — | — | — | — |
| 17 | Analog Sensor 0V Reference | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Digital Input 9 | — | — | — | — | — | — | — | — |
| 19 | Digital Input 10 | — | — | — | — | — | — | — | — |
| 20 | Digital Input 11 | — | — | — | — | — | — | — | — |
| 21 | Digital Input 12 | — | — | — | — | — | — | — | — |
| 22 | Digital Input 13 | — | — | — | — | — | — | — | — |
| 23 | Digital Input 14 | — | — | — | — | — | — | — | — |
| 24 | Analog Input Channel 16 | — | — | — | — | — | — | — | — |
| 25 | Analog Sensor 0V Reference | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 26 | ECU Ground | — | — | — | — | — | — | — | — |
| 27 | Digital Input 1 | — | W65 | — | 0.5 | OEM-C175E-30 | — | — | — |
| 28 | Digital Input 2 | — | W66 | — | 0.5 | OEM-C175E-48 | — | — | — |
| 29 | Digital Input 3 | — | W67 | — | 0.5 | OEM-C175E-57 | — | — | — |
| 30 | Digital Input 4 | — | — | — | — | — | — | — | — |
| 31 | Digital Input 5 | — | — | — | — | — | — | — | — |
| 32 | Digital Input 6 | — | — | — | — | — | — | — | — |
| 33 | Digital Input 7 | — | — | — | — | — | — | — | — |
| 34 | Digital Input 8 | — | — | — | — | — | — | — | — |
KV16-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU 14V Supply | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | Auxiliary Output 13-16 14V Supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Sensor Supply 8V | — | — | — | — | — | — | — | — |
| 4 | Crank Index Sensor + | — | W18 | — | 0.5 | OEM-C175E-70 | — | — | — |
| 5 | Crank Index Sensor - | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sync Sensor + | — | W20 | — | 0.5 | OEM-C175E-55 | — | — | — |
| 7 | Sync Sensor - | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | CAN 1H | — | — | — | — | — | — | — | — |
| 9 | EFI Relay Output (Low Side 200mA) | — | — | — | — | — | — | — | — |
| 10 | CAN 2H | — | — | — | — | — | — | — | — |
| 11 | Knock 1 + | — | W22 | — | 0.5 | OEM-C175E-53 | — | — | — |
| 12 | Knock 1 - | — | — | — | — | — | — | — | — |
| 13 | Shield (Crank/Cam/ Knock) | — | W43 | — | 0.5 | SP-SHD-1 | — | — | — |
| 14 | CAN 1L | — | — | — | — | — | — | — | — |
| 15 | Ignition Switch Input | — | — | — | — | — | — | — | — |
| 16 | CAN 2L | — | — | — | — | — | — | — | — |
| 17 | Knock 2 + | — | W23 | — | 0.5 | OEM-C175E-68 | — | — | — |
| 18 | Knock 2 - | — | — | — | — | — | — | — | — |
| 19 | Analog Output (0.0 - 5.0V) | — | — | — | — | — | — | — | — |
| 20 | Auxiliary Output 9-12 14V Supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 21 | Sensor Supply Vref1: 5.0V | — | W17 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Sensor Supply Vref2: 5.0V | — | — | — | — | — | — | — | — |
| 23 | Ethernet Tx + | — | — | — | — | — | — | — | — |
| 24 | Ethernet Tx - | — | — | — | — | — | — | — | — |
| 25 | Ethernet Rx + | — | — | — | — | — | — | — | — |
| 26 | Ethernet Rx - | — | — | — | — | — | — | — | — |
OEM-C175E
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Fuel injector driver 1 (INJ 1) | — | W32 | — | 0.5 | KV16-B-1 | — | — | — |
| 2 | Fuel injector driver 5 (INJ 5) | — | W36 | — | 0.5 | KV16-B-5 | — | — | — |
| 3 | Fuel injector driver 4 (INJ 4) | — | W35 | — | 0.5 | KV16-B-4 | — | — | — |
| 4 | Variable camshaft timing valve 2 (VCT2) | — | W49 | — | 0.5 | KV16-B-17 | — | — | — |
| 5 | Variable camshaft timing valve 1 (VCT1) | — | W48 | — | 0.5 | KV16-B-16 | — | — | — |
| 6 | Variable camshaft timing valve 4 (VCT4) | — | W51 | — | 0.5 | KV16-B-11 | — | — | — |
| 7 | Variable camshaft timing valve 3 (VCT3) | — | W50 | — | 0.5 | KV16-B-10 | — | — | — |
| 8 | Electronic throttle control reference (ETCREF) | — | W16 | — | 0.5 | SP-5V1-1 | — | — | — |
| 9 | Throttle position positive slope (TP2-PS) | — | W61 | — | 0.5 | KV16-C-4 | — | — | — |
| 10 | Throttle position negative slope (TP1-NS) | — | W60 | — | 0.5 | KV16-C-3 | — | — | — |
| 11 | — | — | — | — | — | — | — | — | — |
| 12 | — | — | — | — | — | — | — | — | — |
| 13 | — | — | — | — | — | — | — | — | — |
| 14 | — | — | — | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — | — | — | — |
| 16 | Fuel injector driver 8 (INJ 8) | — | W39 | — | 0.5 | KV16-B-8 | — | — | — |
| 17 | Buffered power supply sensors (VBPWR) | — | W14 | — | 0.5 | SP-5V1-1 | — | — | — |
| 18 | PCM power feed (VPWR, fused) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 19 | — | — | — | — | — | — | — | — | — |
| 20 | Universal HEGO 1st reference (UREF-11) | — | W57 | — | 0.5 | KV16-A-26 | — | — | — |
| 21 | Universal HEGO 2nd reference (UREF-21) | — | W58 | — | 0.5 | KV16-A-23 | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | Electronic throttle control return (ETCRTN) | — | W5 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | — | — | — | — | — | — | — | — | — |
| 25 | — | — | — | — | — | — | — | — | — |
| 26 | — | — | — | — | — | — | — | — | — |
| 27 | Intake air temperature (IAT) | — | W62 | — | 0.5 | KV16-C-5 | — | — | — |
| 28 | — | — | — | — | — | — | — | — | — |
| 29 | — | — | — | — | — | — | — | — | — |
| 30 | Engine oil level switch (EOL) | — | W65 | — | 0.5 | KV16-C-27 | — | — | — |
| 31 | Fuel injector driver 6 (INJ 6) | — | W37 | — | 0.5 | KV16-B-6 | — | — | — |
| 32 | — | — | — | — | — | — | — | — | — |
| 33 | — | — | — | — | — | — | — | — | — |
| 34 | Voltage reference engine (VREF) | — | W15 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Universal HEGO 1st pump current (UO2SIP-11) | — | W53 | — | 0.5 | KV16-A-25 | — | — | — |
| 36 | Universal HEGO 2nd pump current (UO2SIP-21) | — | W54 | — | 0.5 | KV16-A-22 | — | — | — |
| 37 | — | — | — | — | — | — | — | — | — |
| 38 | — | — | — | — | — | — | — | — | — |
| 39 | Crankshaft sensor shield/drain | — | W42 | — | 0.5 | SP-SHD-1 | — | — | — |
| 40 | VR sensor return (VRSRTN) | — | W6 | — | 0.5 | SP-0V-1 | — | — | — |
| 41 | Camshaft position bank 2 (CMP2) | — | — | — | — | — | — | — | — |
| 42 | Camshaft position bank 2 exhaust (CMP2 EX) | — | — | — | — | — | — | — | — |
| 43 | — | — | — | — | — | — | — | — | — |
| 44 | Intake manifold monitor (IMM) | — | W59 | — | 0.5 | KV16-C-2 | — | — | — |
| 45 | Intake port deactivation valve position | — | W64 | — | 0.5 | KV16-C-7 | — | — | — |
| 46 | Fuel injector driver 3 (INJ 3) | — | W34 | — | 0.5 | KV16-B-3 | — | — | — |
| 47 | Cylinder head temperature (CHT) | — | W63 | — | 0.5 | KV16-C-6 | — | — | — |
| 48 | Oil pressure switch | — | W66 | — | 0.5 | KV16-C-28 | — | — | — |
| 49 | Signal return engine #2 | — | W7 | — | 0.5 | SP-0V-1 | — | — | — |
| 50 | Universal HEGO 1st sense (UO2SN-11) | — | W55 | — | 0.5 | KV16-A-18 | — | — | — |
| 51 | Universal HEGO 2nd sense (UO2SN-21) | — | W56 | — | 0.5 | KV16-A-21 | — | — | — |
| 52 | Knock sensor 1 bank 1 return (KS1−) | — | W8 | — | 0.5 | SP-0V-1 | — | — | — |
| 53 | Knock sensor 1 bank 1 signal (KS1+) | — | W22 | — | 0.5 | KV16-D-11 | — | — | — |
| 54 | VR sensor return (VRSRTN) | — | W9 | — | 0.5 | SP-0V-1 | — | — | — |
| 55 | Camshaft position bank 1 (CMP1) | — | W20 | — | 0.5 | KV16-D-6 | — | — | — |
| 56 | Camshaft position bank 1 exhaust (CMP1 EX) | — | — | — | — | — | — | — | — |
| 57 | Oil pressure switch (MTX) | — | W67 | — | 0.5 | KV16-C-29 | — | — | — |
| 58 | — | — | — | — | — | — | — | — | — |
| 59 | Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD) | — | — | — | — | — | — | — | — |
| 60 | IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD) | — | — | — | — | — | — | — | — |
| 61 | Fuel injector driver 7 (INJ 7) | — | W38 | — | 0.5 | KV16-B-7 | — | — | — |
| 62 | Fuel injector driver 2 (INJ 2) | — | W33 | — | 0.5 | KV16-B-2 | — | — | — |
| 63 | — | — | — | — | — | — | — | — | — |
| 64 | — | — | — | — | — | — | — | — | — |
| 65 | — | — | — | — | — | — | — | — | — |
| 66 | — | — | — | — | — | — | — | — | — |
| 67 | Knock sensor 2 bank 1 return (KS2−) | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 68 | Knock sensor 2 bank 1 signal (KS2+) | — | W23 | — | 0.5 | KV16-D-17 | — | — | — |
| 69 | Crankshaft position return (CKP−) | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 70 | Crankshaft position (CKP+) | — | W18 | — | 0.5 | KV16-D-4 | — | — | — |
| 71 | Canister purge valve (CANP) | — | W52 | — | 0.5 | KV16-B-12 | — | — | — |
| 72 | — | — | — | — | — | — | — | — | — |
| 73 | — | — | — | — | — | — | — | — | — |
| 74 | — | — | — | — | — | — | — | — | — |
| 75 | — | — | — | — | — | — | — | — | — |
| 76 | — | — | — | — | — | — | — | — | — |
| 77 | — | — | — | — | — | — | — | — | — |
| 78 | Heater O2 post-cat 1st (HTR12) | — | W44 | — | 0.5 | KV16-A-10 | — | — | — |
| 79 | Heater O2 pre-cat 1st (HTR11) | — | W45 | — | 0.5 | KV16-A-11 | — | — | — |
| 80 | — | — | — | — | — | — | — | — | — |
| 81 | Throttle actuator control motor − (TACM−) | — | W40 | — | 0.5 | KV16-B-19 | — | — | — |
| 82 | Throttle actuator control motor + (TACM+) | — | W41 | — | 0.5 | KV16-B-18 | — | — | — |
| 83 | Heater O2 post-cat 2nd (HTR22) | — | W46 | — | 0.5 | KV16-B-14 | — | — | — |
| 84 | Heater O2 pre-cat 2nd (HTR21) | — | W47 | — | 0.5 | KV16-B-15 | — | — | — |
| 85 | — | — | — | — | — | — | — | — | — |
| 86 | — | — | — | — | — | — | — | — | — |
| 87 | Ignition coil on plug G (COP-G) | — | W24 | — | 0.5 | KV16-B-26 | — | — | — |
| 88 | Ignition coil on plug F (COP-F) | — | W25 | — | 0.5 | KV16-B-27 | — | — | — |
| 89 | Ignition coil on plug E (COP-E) | — | W26 | — | 0.5 | KV16-B-28 | — | — | — |
| 90 | Ignition coil on plug H (COP-H) | — | W27 | — | 0.5 | KV16-B-29 | — | — | — |
| 91 | — | — | — | — | — | — | — | — | — |
| 92 | Ignition coil on plug D (COP-D) | — | W28 | — | 0.5 | KV16-B-30 | — | — | — |
| 93 | Ignition coil on plug A (COP-A) | — | W29 | — | 0.5 | KV16-B-31 | — | — | — |
| 94 | Ignition coil on plug C (COP-C) | — | W30 | — | 0.5 | KV16-B-32 | — | — | — |
| 95 | Ignition coil on plug B (COP-B) | — | W31 | — | 0.5 | KV16-B-33 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | KV16-C-25 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | KV16-D-5 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | KV16-D-7 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-C175E-69 | — | — | — |
| 1 | — | — | W5 | — | 0.5 | OEM-C175E-23 | — | — | — |
| 1 | — | — | W6 | — | 0.5 | OEM-C175E-40 | — | — | — |
| 1 | — | — | W7 | — | 0.5 | OEM-C175E-49 | — | — | — |
| 1 | — | — | W8 | — | 0.5 | OEM-C175E-52 | — | — | — |
| 1 | — | — | W9 | — | 0.5 | OEM-C175E-54 | — | — | — |
| 1 | — | — | W10 | — | 0.5 | OEM-C175E-67 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | KV16-C-17 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-C175E-18 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | KV16-D-1 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | KV16-D-2 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | KV16-D-20 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-C175E-17 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-C175E-34 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-C175E-8 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | KV16-D-21 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W42 | — | 0.5 | OEM-C175E-39 | — | — | — |
| 1 | — | — | W43 | — | 0.5 | KV16-D-13 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-C175E-1 | Fuel injector driver 1 (INJ 1) | injector_out | KV16-B-1 | Injection Channel 1 | injector_out | corroborated | |
| OEM-C175E-10 | Throttle position negative slope (TP1-NS) | analog_in | KV16-C-3 | Analog Input Channel 2 | analog_in | corroborated | |
| OEM-C175E-16 | Fuel injector driver 8 (INJ 8) | injector_out | KV16-B-8 | Injection Channel 8 | injector_out | corroborated | |
| OEM-C175E-17 | Buffered power supply sensors (VBPWR) | vref | KV16-D-21 | Sensor Supply Vref1: 5.0V | vref | corroborated | |
| OEM-C175E-18 | PCM power feed (VPWR, fused) | power_in | KV16-D-1 + KV16-D-2 + KV16-D-20 | ECU 14V Supply + Auxiliary Output 13-16 14V Supply + Auxiliary Output 9-12 14V Supply | power_in | corroborated | |
| OEM-C175E-2 | Fuel injector driver 5 (INJ 5) | injector_out | KV16-B-5 | Injection Channel 5 | injector_out | corroborated | |
| OEM-C175E-20 | Universal HEGO 1st reference (UREF-11) | wb_vgnd | KV16-A-26 | Lambda 1 Virtual Ground (VGnd) | wb_vgnd | corroborated | |
| OEM-C175E-21 | Universal HEGO 2nd reference (UREF-21) | wb_vgnd | KV16-A-23 | Lambda 2 Virtual Ground (VGnd) | wb_vgnd | corroborated | |
| OEM-C175E-23 | Electronic throttle control return (ETCRTN) | sensor_ground | KV16-C-17 + KV16-C-25 + KV16-D-5 + KV16-D-7 | Analog Sensor 0V Reference + Analog Sensor 0V Reference + Crank Index Sensor - + Sync Sensor - | sensor_ground + trigger_in | corroborated | |
| OEM-C175E-27 | Intake air temperature (IAT) | temp_in | KV16-C-5 | Analog Input Channel 4 | analog_in | corroborated | |
| OEM-C175E-3 | Fuel injector driver 4 (INJ 4) | injector_out | KV16-B-4 | Injection Channel 4 | injector_out | corroborated | |
| OEM-C175E-30 | Engine oil level switch (EOL) | digital_in | KV16-C-27 | Digital Input 1 | digital_in | corroborated | |
| OEM-C175E-31 | Fuel injector driver 6 (INJ 6) | injector_out | KV16-B-6 | Injection Channel 6 | injector_out | corroborated | |
| OEM-C175E-34 | Voltage reference engine (VREF) | vref | KV16-D-21 | Sensor Supply Vref1: 5.0V | vref | corroborated | |
| OEM-C175E-35 | Universal HEGO 1st pump current (UO2SIP-11) | wb_ip | KV16-A-25 | Lambda 1 Pump Cell (Ip) | wb_ip | corroborated | |
| OEM-C175E-36 | Universal HEGO 2nd pump current (UO2SIP-21) | wb_ip | KV16-A-22 | Lambda 2 Pump Cell (Ip) | wb_ip | corroborated | |
| OEM-C175E-39 | Crankshaft sensor shield/drain | shield | KV16-D-13 | Shield (Crank/Cam/ Knock) | shield | corroborated | |
| OEM-C175E-4 | Variable camshaft timing valve 2 (VCT2) | low_side_out | KV16-B-17 | Auxiliary Output 8 | low_side_out | corroborated | |
| OEM-C175E-40 | VR sensor return (VRSRTN) | sensor_ground | KV16-C-17 + KV16-C-25 + KV16-D-5 + KV16-D-7 | Analog Sensor 0V Reference + Analog Sensor 0V Reference + Crank Index Sensor - + Sync Sensor - | sensor_ground + trigger_in | corroborated | |
| OEM-C175E-41 | Camshaft position bank 2 (CMP2) | trigger_in | — | — | — | corroborated | |
| OEM-C175E-42 | Camshaft position bank 2 exhaust (CMP2 EX) | trigger_in | — | — | — | corroborated | |
| OEM-C175E-44 | Intake manifold monitor (IMM) | analog_in | KV16-C-2 | Analog Input Channel 1 | analog_in | corroborated | |
| OEM-C175E-45 | Intake port deactivation valve position | analog_in | KV16-C-7 | Analog Input Channel 6 | analog_in | corroborated | |
| OEM-C175E-46 | Fuel injector driver 3 (INJ 3) | injector_out | KV16-B-3 | Injection Channel 3 | injector_out | corroborated | |
| OEM-C175E-47 | Cylinder head temperature (CHT) | temp_in | KV16-C-6 | Analog Input Channel 5 | analog_in | corroborated | |
| OEM-C175E-48 | Oil pressure switch | digital_in | KV16-C-28 | Digital Input 2 | digital_in | corroborated | |
| OEM-C175E-49 | Signal return engine #2 | sensor_ground | KV16-C-17 + KV16-C-25 + KV16-D-5 + KV16-D-7 | Analog Sensor 0V Reference + Analog Sensor 0V Reference + Crank Index Sensor - + Sync Sensor - | sensor_ground + trigger_in | corroborated | |
| OEM-C175E-5 | Variable camshaft timing valve 1 (VCT1) | low_side_out | KV16-B-16 | Auxiliary Output 7 | low_side_out | corroborated | |
| OEM-C175E-50 | Universal HEGO 1st sense (UO2SN-11) | wb_vs | KV16-A-18 | Lambda 1 Nernst Cell (Vs) | wb_vs | corroborated | |
| OEM-C175E-51 | Universal HEGO 2nd sense (UO2SN-21) | wb_vs | KV16-A-21 | Lambda 2 Nernst Cell (Vs) | wb_vs | corroborated | |
| OEM-C175E-52 | Knock sensor 1 bank 1 return (KS1−) | sensor_ground | KV16-C-17 + KV16-C-25 + KV16-D-5 + KV16-D-7 | Analog Sensor 0V Reference + Analog Sensor 0V Reference + Crank Index Sensor - + Sync Sensor - | sensor_ground + trigger_in | corroborated | |
| OEM-C175E-53 | Knock sensor 1 bank 1 signal (KS1+) | knock_in | KV16-D-11 | Knock 1 + | knock_in | corroborated | |
| OEM-C175E-54 | VR sensor return (VRSRTN) | sensor_ground | KV16-C-17 + KV16-C-25 + KV16-D-5 + KV16-D-7 | Analog Sensor 0V Reference + Analog Sensor 0V Reference + Crank Index Sensor - + Sync Sensor - | sensor_ground + trigger_in | corroborated | |
| OEM-C175E-55 | Camshaft position bank 1 (CMP1) | trigger_in | KV16-D-6 | Sync Sensor + | trigger_in | corroborated | |
| OEM-C175E-56 | Camshaft position bank 1 exhaust (CMP1 EX) | trigger_in | — | — | — | corroborated | |
| OEM-C175E-57 | Oil pressure switch (MTX) | digital_in | KV16-C-29 | Digital Input 3 | digital_in | corroborated | |
| OEM-C175E-59 | Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD) | — | — | — | — | corroborated | |
| OEM-C175E-6 | Variable camshaft timing valve 4 (VCT4) | low_side_out | KV16-B-11 | Auxiliary Output 2 | low_side_out | corroborated | |
| OEM-C175E-60 | IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD) | — | — | — | — | corroborated | |
| OEM-C175E-61 | Fuel injector driver 7 (INJ 7) | injector_out | KV16-B-7 | Injection Channel 7 | injector_out | corroborated | |
| OEM-C175E-62 | Fuel injector driver 2 (INJ 2) | injector_out | KV16-B-2 | Injection Channel 2 | injector_out | corroborated | |
| OEM-C175E-67 | Knock sensor 2 bank 1 return (KS2−) | sensor_ground | KV16-C-17 + KV16-C-25 + KV16-D-5 + KV16-D-7 | Analog Sensor 0V Reference + Analog Sensor 0V Reference + Crank Index Sensor - + Sync Sensor - | sensor_ground + trigger_in | corroborated | |
| OEM-C175E-68 | Knock sensor 2 bank 1 signal (KS2+) | knock_in | KV16-D-17 | Knock 2 + | knock_in | corroborated | |
| OEM-C175E-69 | Crankshaft position return (CKP−) | sensor_ground | KV16-C-17 + KV16-C-25 + KV16-D-5 + KV16-D-7 | Analog Sensor 0V Reference + Analog Sensor 0V Reference + Crank Index Sensor - + Sync Sensor - | sensor_ground + trigger_in | corroborated | |
| OEM-C175E-7 | Variable camshaft timing valve 3 (VCT3) | low_side_out | KV16-B-10 | Auxiliary Output 1 | low_side_out | corroborated | |
| OEM-C175E-70 | Crankshaft position (CKP+) | trigger_in | KV16-D-4 | Crank Index Sensor + | trigger_in | corroborated | |
| OEM-C175E-71 | Canister purge valve (CANP) | low_side_out | KV16-B-12 | Auxiliary Output 3 | low_side_out | corroborated | |
| OEM-C175E-78 | Heater O2 post-cat 1st (HTR12) | low_side_out | KV16-A-10 | Lambda 1 Heater - | low_side_out | corroborated | |
| OEM-C175E-79 | Heater O2 pre-cat 1st (HTR11) | low_side_out | KV16-A-11 | Lambda 2 Heater - | low_side_out | corroborated | |
| OEM-C175E-8 | Electronic throttle control reference (ETCREF) | vref | KV16-D-21 | Sensor Supply Vref1: 5.0V | vref | corroborated | |
| OEM-C175E-81 | Throttle actuator control motor − (TACM−) | hbridge_out | KV16-B-19 | Auxiliary Output 10 | hbridge_out | corroborated | |
| OEM-C175E-82 | Throttle actuator control motor + (TACM+) | hbridge_out | KV16-B-18 | Auxiliary Output 9 | hbridge_out | corroborated | |
| OEM-C175E-83 | Heater O2 post-cat 2nd (HTR22) | low_side_out | KV16-B-14 | Auxiliary Output 5 | low_side_out | corroborated | |
| OEM-C175E-84 | Heater O2 pre-cat 2nd (HTR21) | low_side_out | KV16-B-15 | Auxiliary Output 6 | low_side_out | corroborated | |
| OEM-C175E-87 | Ignition coil on plug G (COP-G) | ignition_out | KV16-B-26 | Ignition Channel 1 | ignition_out | corroborated | |
| OEM-C175E-88 | Ignition coil on plug F (COP-F) | ignition_out | KV16-B-27 | Ignition Channel 2 | ignition_out | corroborated | |
| OEM-C175E-89 | Ignition coil on plug E (COP-E) | ignition_out | KV16-B-28 | Ignition Channel 3 | ignition_out | corroborated | |
| OEM-C175E-9 | Throttle position positive slope (TP2-PS) | analog_in | KV16-C-4 | Analog Input Channel 3 | analog_in | corroborated | |
| OEM-C175E-90 | Ignition coil on plug H (COP-H) | ignition_out | KV16-B-29 | Ignition Channel 4 | ignition_out | corroborated | |
| OEM-C175E-92 | Ignition coil on plug D (COP-D) | ignition_out | KV16-B-30 | Ignition Channel 5 | ignition_out | corroborated | |
| OEM-C175E-93 | Ignition coil on plug A (COP-A) | ignition_out | KV16-B-31 | Ignition Channel 6 | ignition_out | corroborated | |
| OEM-C175E-94 | Ignition coil on plug C (COP-C) | ignition_out | KV16-B-32 | Ignition Channel 7 | ignition_out | corroborated | |
| OEM-C175E-95 | Ignition coil on plug B (COP-B) | ignition_out | KV16-B-33 | Ignition Channel 8 | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-C175E-18 | SP-14V-1 | 0.85 | no route | PCM power feed (VPWR, fused) | — | |
| W2 | SP-14V-1 | KV16-D-1 | 0.85 | no route | ECU 14V Supply | — | |
| W3 | SP-14V-1 | KV16-D-2 | 0.85 | no route | Auxiliary Output 13-16 14V Supply | — | |
| W4 | SP-14V-1 | KV16-D-20 | 0.85 | no route | Auxiliary Output 9-12 14V Supply | — | |
| W5 | OEM-C175E-23 | SP-0V-1 | 0.5 | no route | Electronic throttle control return (ETCRTN) | — | |
| W6 | OEM-C175E-40 | SP-0V-1 | 0.5 | no route | VR sensor return (VRSRTN) | — | |
| W7 | OEM-C175E-49 | SP-0V-1 | 0.5 | no route | Signal return engine #2 | — | |
| W8 | OEM-C175E-52 | SP-0V-1 | 0.5 | no route | Knock sensor 1 bank 1 return (KS1−) | — | |
| W9 | OEM-C175E-54 | SP-0V-1 | 0.5 | no route | VR sensor return (VRSRTN) | — | |
| W10 | OEM-C175E-67 | SP-0V-1 | 0.5 | no route | Knock sensor 2 bank 1 return (KS2−) | — | |
| W11 | OEM-C175E-69 | SP-0V-1 | 0.5 | no route | Crankshaft position return (CKP−) | — | |
| W12 | SP-0V-1 | KV16-C-17 | 0.5 | no route | Analog Sensor 0V Reference | — | |
| W13 | SP-0V-1 | KV16-C-25 | 0.5 | no route | Analog Sensor 0V Reference | — | |
| W14 | OEM-C175E-17 | SP-5V1-1 | 0.5 | no route | Buffered power supply sensors (VBPWR) | — | |
| W15 | OEM-C175E-34 | SP-5V1-1 | 0.5 | no route | Voltage reference engine (VREF) | — | |
| W16 | OEM-C175E-8 | SP-5V1-1 | 0.5 | no route | Electronic throttle control reference (ETCREF) | — | |
| W17 | SP-5V1-1 | KV16-D-21 | 0.5 | no route | Sensor Supply Vref1: 5.0V | — | |
| W18 | OEM-C175E-70 | KV16-D-4 | 0.5 | no route | Crankshaft position (CKP+) | — | |
| W19 | SP-0V-1 | KV16-D-5 | 0.5 | no route | Crank Index Sensor - | — | |
| W20 | OEM-C175E-55 | KV16-D-6 | 0.5 | no route | Camshaft position bank 1 (CMP1) | — | |
| W21 | SP-0V-1 | KV16-D-7 | 0.5 | no route | Sync Sensor - | — | |
| W22 | OEM-C175E-53 | KV16-D-11 | 0.5 | no route | Knock sensor 1 bank 1 signal (KS1+) | — | |
| W23 | OEM-C175E-68 | KV16-D-17 | 0.5 | no route | Knock sensor 2 bank 1 signal (KS2+) | — | |
| W24 | OEM-C175E-87 | KV16-B-26 | 0.5 | no route | Ignition coil on plug G (COP-G) | — | |
| W25 | OEM-C175E-88 | KV16-B-27 | 0.5 | no route | Ignition coil on plug F (COP-F) | — | |
| W26 | OEM-C175E-89 | KV16-B-28 | 0.5 | no route | Ignition coil on plug E (COP-E) | — | |
| W27 | OEM-C175E-90 | KV16-B-29 | 0.5 | no route | Ignition coil on plug H (COP-H) | — | |
| W28 | OEM-C175E-92 | KV16-B-30 | 0.5 | no route | Ignition coil on plug D (COP-D) | — | |
| W29 | OEM-C175E-93 | KV16-B-31 | 0.5 | no route | Ignition coil on plug A (COP-A) | — | |
| W30 | OEM-C175E-94 | KV16-B-32 | 0.5 | no route | Ignition coil on plug C (COP-C) | — | |
| W31 | OEM-C175E-95 | KV16-B-33 | 0.5 | no route | Ignition coil on plug B (COP-B) | — | |
| W32 | OEM-C175E-1 | KV16-B-1 | 0.5 | no route | Fuel injector driver 1 (INJ 1) | — | |
| W33 | OEM-C175E-62 | KV16-B-2 | 0.5 | no route | Fuel injector driver 2 (INJ 2) | — | |
| W34 | OEM-C175E-46 | KV16-B-3 | 0.5 | no route | Fuel injector driver 3 (INJ 3) | — | |
| W35 | OEM-C175E-3 | KV16-B-4 | 0.5 | no route | Fuel injector driver 4 (INJ 4) | — | |
| W36 | OEM-C175E-2 | KV16-B-5 | 0.5 | no route | Fuel injector driver 5 (INJ 5) | — | |
| W37 | OEM-C175E-31 | KV16-B-6 | 0.5 | no route | Fuel injector driver 6 (INJ 6) | — | |
| W38 | OEM-C175E-61 | KV16-B-7 | 0.5 | no route | Fuel injector driver 7 (INJ 7) | — | |
| W39 | OEM-C175E-16 | KV16-B-8 | 0.5 | no route | Fuel injector driver 8 (INJ 8) | — | |
| W40 | OEM-C175E-81 | KV16-B-19 | 0.5 | no route | Throttle actuator control motor − (TACM−) | — | |
| W41 | OEM-C175E-82 | KV16-B-18 | 0.5 | no route | Throttle actuator control motor + (TACM+) | — | |
| W42 | OEM-C175E-39 | SP-SHD-1 | 0.5 | no route | Crankshaft sensor shield/drain | — | |
| W43 | SP-SHD-1 | KV16-D-13 | 0.5 | no route | Shield (Crank/Cam/ Knock) | — | |
| W44 | OEM-C175E-78 | KV16-A-10 | 0.5 | no route | Heater O2 post-cat 1st (HTR12) | — | |
| W45 | OEM-C175E-79 | KV16-A-11 | 0.5 | no route | Heater O2 pre-cat 1st (HTR11) | — | |
| W46 | OEM-C175E-83 | KV16-B-14 | 0.5 | no route | Heater O2 post-cat 2nd (HTR22) | — | |
| W47 | OEM-C175E-84 | KV16-B-15 | 0.5 | no route | Heater O2 pre-cat 2nd (HTR21) | — | |
| W48 | OEM-C175E-5 | KV16-B-16 | 0.5 | no route | Variable camshaft timing valve 1 (VCT1) | — | |
| W49 | OEM-C175E-4 | KV16-B-17 | 0.5 | no route | Variable camshaft timing valve 2 (VCT2) | — | |
| W50 | OEM-C175E-7 | KV16-B-10 | 0.5 | no route | Variable camshaft timing valve 3 (VCT3) | — | |
| W51 | OEM-C175E-6 | KV16-B-11 | 0.5 | no route | Variable camshaft timing valve 4 (VCT4) | — | |
| W52 | OEM-C175E-71 | KV16-B-12 | 0.5 | no route | Canister purge valve (CANP) | — | |
| W53 | OEM-C175E-35 | KV16-A-25 | 0.5 | no route | Universal HEGO 1st pump current (UO2SIP-11) | — | |
| W54 | OEM-C175E-36 | KV16-A-22 | 0.5 | no route | Universal HEGO 2nd pump current (UO2SIP-21) | — | |
| W55 | OEM-C175E-50 | KV16-A-18 | 0.5 | no route | Universal HEGO 1st sense (UO2SN-11) | — | |
| W56 | OEM-C175E-51 | KV16-A-21 | 0.5 | no route | Universal HEGO 2nd sense (UO2SN-21) | — | |
| W57 | OEM-C175E-20 | KV16-A-26 | 0.5 | no route | Universal HEGO 1st reference (UREF-11) | — | |
| W58 | OEM-C175E-21 | KV16-A-23 | 0.5 | no route | Universal HEGO 2nd reference (UREF-21) | — | |
| W59 | OEM-C175E-44 | KV16-C-2 | 0.5 | no route | Intake manifold monitor (IMM) | — | |
| W60 | OEM-C175E-10 | KV16-C-3 | 0.5 | no route | Throttle position negative slope (TP1-NS) | — | |
| W61 | OEM-C175E-9 | KV16-C-4 | 0.5 | no route | Throttle position positive slope (TP2-PS) | — | |
| W62 | OEM-C175E-27 | KV16-C-5 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W63 | OEM-C175E-47 | KV16-C-6 | 0.5 | no route | Cylinder head temperature (CHT) | — | |
| W64 | OEM-C175E-45 | KV16-C-7 | 0.5 | no route | Intake port deactivation valve position | — | |
| W65 | OEM-C175E-30 | KV16-C-27 | 0.5 | no route | Engine oil level switch (EOL) | — | |
| W66 | OEM-C175E-48 | KV16-C-28 | 0.5 | no route | Oil pressure switch | — | |
| W67 | OEM-C175E-57 | KV16-C-29 | 0.5 | no route | Oil pressure switch (MTX) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 3-1437290-8 | TE | Superseal 1.0 26-way plug, Key 2 | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| connector | COYOTE-PCM-A | — | 2011–14 Mustang GT PCM 70-way connector C175E (housing P/N unknown) | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 55.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (17)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_MOTOR_DRIVE | throttle motor | This car has an electronic throttle, but no throttle-motor pins were found in the harness. Wire the motor to an H-bridge on the ECU, or switch to the cable-conversion variant. |
| error | DBW_SENSOR_INPUT | pedal | Only 0 pedal track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | DBW_SENSOR_INPUT | tps | Only 0 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | PHYS_REQUIRED_OPEN | KV16-A-13 | KV16-A-13 "ECU Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | KV16-A-19 | KV16-A-19 "ECU Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | KV16-B-34 | KV16-B-34 "ECU Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | KV16-B-9 | KV16-B-9 "ECU Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | KV16-C-1 | KV16-C-1 "ECU Ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | KV16-C-26 | KV16-C-26 "ECU Ground" is required but not wired. |
| error | REQUIRED_UNMAPPED | OEM-C175E-41 | Required OEM function "Camshaft position bank 2 (CMP2)" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C175E-42 | Required OEM function "Camshaft position bank 2 exhaust (CMP2 EX)" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-C175E-56 | Required OEM function "Camshaft position bank 1 exhaust (CMP1 EX)" (trigger_in) is not connected to the new ECU. |
| warn | DATASET_GAP | Mustang GT PCM C175E | 32 of 95 cavities on Mustang GT PCM C175E have no pin data (11,12,13,14,15,19,22,24,25,26,28,29,32,33,37,38,43,58,63,64,65,66,72,73,74,75,76,77,80,85,86,91). Anything there is invisible to these checks. |
| info | NET_FAMILY | KV16-C-25 ↔ KV16-D-5 | KV16-C-25 "Analog Sensor 0V Reference" [sensor_ground] is wired to KV16-D-5 "Crank Index Sensor -" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | NET_FAMILY | OEM-C175E-27 ↔ KV16-C-5 | OEM-C175E-27 "Intake air temperature (IAT)" [temp_in] is wired to KV16-C-5 "Analog Input Channel 4" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-C175E-47 ↔ KV16-C-6 | OEM-C175E-47 "Cylinder head temperature (CHT)" [temp_in] is wired to KV16-C-6 "Analog Input Channel 5" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 2 optional OEM pins are not mapped: OEM-C175E-59 Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD); OEM-C175E-60 IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD) |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Fit check: unconfirmed. Confirm these before building: - Needs CAN (ford_mustang_2011_14); not documented for this ECU - This car has PATS immobilizer; needs a delete/bypass - Trigger pattern for Ford Coyote not checked yet Auto-mapped by auto_map() from the library pin data on 2026-10-06. Review every wire against both manuals before building. Open items: - OEM-C175E 56: Camshaft position bank 1 exhaust (CMP1 EX): no free cam_vr/cam_hall/frequency_in input on Emtron KV16 - OEM-C175E 41: Camshaft position bank 2 (CMP2): no free cam_vr/cam_hall/frequency_in input on Emtron KV16 - OEM-C175E 42: Camshaft position bank 2 exhaust (CMP2 EX): no free cam_vr/cam_hall/frequency_in input on Emtron KV16 - KV16-A 13: ECU Ground: required by Emtron KV16 but no stock pin feeds it; wire by hand - KV16-A 19: ECU Ground: required by Emtron KV16 but no stock pin feeds it; wire by hand - KV16-B 34: ECU Ground: required by Emtron KV16 but no stock pin feeds it; wire by hand - KV16-B 9: ECU Ground: required by Emtron KV16 but no stock pin feeds it; wire by hand - KV16-C 1: ECU Ground: required by Emtron KV16 but no stock pin feeds it; wire by hand - KV16-C 26: ECU Ground: required by Emtron KV16 but no stock pin feeds it; wire by hand Not wired: - KV16-D 12: Knock 1 - left open: the stock knock sensor has one ECU wire; check the ECU manual for single-wire knock sensors - KV16-D 18: Knock 2 - left open: the stock knock sensor has one ECU wire; check the ECU manual for single-wire knock sensors - OEM-C175E 59: Manifold heater (CE511) or IMRC charge-motion valve (CE315, 5.0L RHD): not classified in the library; wire by hand - OEM-C175E 60: IMTV monitor (CE923) or intake manifold tuning valve (CE316, 5.0L RHD): not classified in the library; wire by hand - KV16-D 15: Ignition Switch Input: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Emtron KV12/KV16 Pinout Rev2 | https://github.com/emtron-australia/help | — | 2026-10-05 | 2f3a1b2d2ed4 |
| 3 | community_copy | iihs.net: 2011 Mustang factory Wiring Diagrams (Cell 24 Electronic Engine Controls, 5.0L) | https://iihs.net/fsm/?d=711 | — | — | — |
| 2 | community_copy | rusEFI OEM-Docs: Coyote C175E pinout (Pin/Circuit/Gauge/Circuit Function/Qualifier) | https://raw.githubusercontent.com/rusefi/rusefi_documentation/master/OEM-Docs/Ford/Coyote-175e-pinout-B.png | — | — | — |