Scion FR-S (ZN6, FA20) → ECUMASTER EMU Black (auto)
Scion FR-S (ZN6, FA20) — ECUMASTER — EMU Black
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-09
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 2: read the Findings page before cutting any wire |
| Size of the job | 69 wires · 10 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A33-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A34-1 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A34-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A34-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A36-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A36-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-A33-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-A34-27 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A35-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A35-30 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A36-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-A34-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-A35-21 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-A35-22 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-A36-19 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A34-16 | EMUBLACK-Black-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-A34-14 | EMUBLACK-Black-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-A34-26 | EMUBLACK-Black-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-A34-25 | EMUBLACK-Black-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-A34-28 | EMUBLACK-Black-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A34-17 | EMUBLACK-Black-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-A36-21 | EMUBLACK-Grey-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-A36-10 | EMUBLACK-Grey-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-A36-31 | EMUBLACK-Grey-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-A36-8 | EMUBLACK-Black-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-A36-12 | EMUBLACK-Grey-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A36-14 | EMUBLACK-Grey-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A36-22 | EMUBLACK-Grey-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A36-25 | EMUBLACK-Grey-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A36-24 | EMUBLACK-Grey-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A36-32 | EMUBLACK-Grey-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A33-27 | EMUBLACK-Grey-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A36-1 | EMUBLACK-Grey-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A36-2 | EMUBLACK-Grey-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A35-13 | EMUBLACK-Grey-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A35-12 | EMUBLACK-Grey-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A35-11 | EMUBLACK-Grey-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A33-20 | EMUBLACK-Grey-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A35-17 | EMUBLACK-Grey-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A35-35 | EMUBLACK-Grey-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A35-5 | EMUBLACK-Grey-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-A35-7 | EMUBLACK-Grey-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-A34-5 | EMUBLACK-Grey-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-A33-22 | EMUBLACK-Black-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A34-20 | EMUBLACK-Black-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-A35-31 | EMUBLACK-Black-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-A36-28 | EMUBLACK-Black-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A35-23 | EMUBLACK-Black-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A36-18 | EMUBLACK-Black-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-A34-21 | EMUBLACK-Black-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-A36-30 | EMUBLACK-Black-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-A33-12 | EMUBLACK-Black-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-A36-20 | EMUBLACK-Black-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-A33-14 | EMUBLACK-Black-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-A33-15 | EMUBLACK-Black-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-A33-16 | EMUBLACK-Black-36 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-A33-19 | EMUBLACK-Black-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-A33-18 | EMUBLACK-Black-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUBLACK-Black-13 | EMUBLACK-Black-27 | open (OL) | +12 V supply must not touch power ground | |
| 2 | EMUBLACK-Black-13 | EMUBLACK-Black-29 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | EMUBLACK-Black-13 | EMUBLACK-Black-26 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 4 | EMUBLACK-Black-27 | EMUBLACK-Black-26 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | EMUBLACK-Black-29 | EMUBLACK-Black-26 | open (OL) | sensor ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUBLACK-Black
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #5 | — | — | — | — | — | — | — | — |
| 10 | Switch #1 In | — | W65 | — | 0.5 | OEM-A33-14 | — | — | — |
| 11 | RS232 TXD | — | — | — | — | — | — | — | — |
| 12 | CAN H | — | W68 | — | 0.5 | OEM-A33-19 | — | — | — |
| 13 | Battery +12V | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Ignition coil #4 | — | W36 | — | 0.5 | OEM-A36-8 | — | — | — |
| 15 | EGT in #2 | — | — | — | — | — | — | — | — |
| 16 | Knock Sensor in #2 | — | W32 | — | 0.5 | OEM-A34-17 | — | — | — |
| 17 | Analog In #3 | — | W58 | — | 0.5 | OEM-A36-28 | — | — | — |
| 18 | TPS In | — | W57 | — | 0.5 | OEM-A35-31 | — | — | — |
| 19 | WBO Ip | — | — | — | — | — | — | — | — |
| 2 | EGT in #1 | — | — | — | — | — | — | — | — |
| 20 | VSS In | — | W30 | — | 0.5 | OEM-A34-25 | — | — | — |
| 21 | Camsync In #1 | — | W28 | — | 0.5 | OEM-A34-14 | — | — | — |
| 22 | WBO Rcal | — | — | — | — | — | — | — | — |
| 23 | Switch #2 In | — | W66 | — | 0.5 | OEM-A33-15 | — | — | — |
| 24 | RS232 RXD | — | — | — | — | — | — | — | — |
| 25 | CAN L | — | W69 | — | 0.5 | OEM-A33-18 | — | — | — |
| 26 | +5V supply | — | W26 | — | 0.5 | SP-5V1-1 | — | — | — |
| 27 | Power Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 28 | Ecu Ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Sensor Ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Knock Sensor in #1 | — | W31 | — | 0.5 | OEM-A34-28 | — | — | — |
| 30 | Analog In #4 | — | W59 | — | 0.5 | OEM-A35-23 | — | — | — |
| 31 | Analog In #1 | — | W55 | — | 0.5 | OEM-A33-22 | — | — | — |
| 32 | IAT In | — | W62 | — | 0.5 | OEM-A36-30 | — | — | — |
| 33 | WBO VGND | — | — | — | — | — | — | — | — |
| 34 | +5V supply | — | — | — | — | — | — | — | — |
| 35 | Analog In #5 | — | W60 | — | 0.5 | OEM-A36-18 | — | — | — |
| 36 | Switch #3 In | — | W67 | — | 0.5 | OEM-A33-16 | — | — | — |
| 37 | Analog In #6 | — | W61 | — | 0.5 | OEM-A34-21 | — | — | — |
| 38 | Sensor Ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 39 | Sensor Ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | Analog In #2 | — | W56 | — | 0.5 | OEM-A34-20 | — | — | — |
| 5 | CLT In | — | W63 | — | 0.5 | OEM-A33-12 | — | — | — |
| 6 | WBO Vs | — | — | — | — | — | — | — | — |
| 7 | Camsync In #2 | — | W29 | — | 0.5 | OEM-A34-26 | — | — | — |
| 8 | Primary trigger | — | W27 | — | 0.5 | OEM-A34-16 | — | — | — |
| 9 | Flex Fuel In | — | W64 | — | 0.5 | OEM-A36-20 | — | — | — |
EMUBLACK-Grey
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #6 | — | — | — | — | — | — | — | — |
| 10 | H-Bridge #1 Winding B | — | W44 | — | 0.5 | OEM-A36-1 | — | — | — |
| 11 | H-Bridge #2 Winding B | — | W52 | — | 0.5 | OEM-A35-5 | — | — | — |
| 12 | AUX 5 | — | W50 | — | 0.5 | OEM-A35-17 | — | — | — |
| 13 | AUX 2 / Injector #8 | — | W47 | — | 0.5 | OEM-A35-12 | — | — | — |
| 14 | Injector #5 | — | W41 | — | 0.5 | OEM-A36-24 | — | — | — |
| 15 | Injector #2 | — | W38 | — | 0.5 | OEM-A36-14 | — | — | — |
| 16 | Ignition coil #2 | — | W34 | — | 0.5 | OEM-A36-10 | — | — | — |
| 17 | Power Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition +12V | — | W43 | — | 0.5 | OEM-A33-27 | — | — | — |
| 19 | WBO Heater | — | W54 | — | 0.5 | OEM-A34-5 | — | — | — |
| 2 | H-Bridge #1 Winding A | — | W45 | — | 0.5 | OEM-A36-2 | — | — | — |
| 20 | AUX 4 / Tacho | — | W49 | — | 0.5 | OEM-A33-20 | — | — | — |
| 21 | AUX 1 / Injector #7 | — | W46 | — | 0.5 | OEM-A35-13 | — | — | — |
| 22 | Injector #6 | — | W42 | — | 0.5 | OEM-A36-32 | — | — | — |
| 23 | Injector #3 | — | W39 | — | 0.5 | OEM-A36-22 | — | — | — |
| 24 | Power Ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | H-Bridge #2 Winding A | — | W53 | — | 0.5 | OEM-A35-7 | — | — | — |
| 4 | AUX 6 | — | W51 | — | 0.5 | OEM-A35-35 | — | — | — |
| 5 | AUX 3 | — | W48 | — | 0.5 | OEM-A35-11 | — | — | — |
| 6 | Injector #4 | — | W40 | — | 0.5 | OEM-A36-25 | — | — | — |
| 7 | Injector #1 | — | W37 | — | 0.5 | OEM-A36-12 | — | — | — |
| 8 | Ignition coil #1 | — | W33 | — | 0.5 | OEM-A36-21 | — | — | — |
| 9 | Ignition coil #3 | — | W35 | — | 0.5 | OEM-A36-31 | — | — | — |
OEM-A33
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU power (+B2, main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 12 | Intake air temperature (THA, in MAF) | — | W63 | — | 0.5 | EMUBLACK-Black-5 | — | — | — |
| 14 | Starter signal (STSW2) | — | W65 | — | 0.5 | EMUBLACK-Black-10 | — | — | — |
| 15 | Clutch switch (CLSW) | — | W66 | — | 0.5 | EMUBLACK-Black-23 | — | — | — |
| 16 | Neutral switch (NSW) | — | W67 | — | 0.5 | EMUBLACK-Black-36 | — | — | — |
| 17 | Starter signal (STSW2) | — | — | — | — | — | — | — | — |
| 18 | CAN low (CANL) | — | W69 | — | 0.5 | EMUBLACK-Black-25 | — | — | — |
| 19 | CAN high (CANH) | — | W68 | — | 0.5 | EMUBLACK-Black-12 | — | — | — |
| 2 | Battery constant (BATT, memory) | — | — | — | — | — | — | — | — |
| 20 | Blower relay (HB) | — | W49 | — | 0.5 | EMUBLACK-Grey-20 | — | — | — |
| 22 | Mass air flow (VG) | — | W55 | — | 0.5 | EMUBLACK-Black-31 | — | — | — |
| 27 | Ignition switch sense (IGSW, IG2 relay) | — | W43 | — | 0.5 | EMUBLACK-Grey-18 | — | — | — |
| 28 | Shield ground (SLE2) | — | — | — | — | — | — | — | — |
| 29 | MAF sensor ground (E2G) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Stop light switch (ST1-) | — | — | — | — | — | — | — | — |
| 4 | Power ground (EC) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 8 | A/C pressure sensor (ACP) | — | — | — | — | — | — | — | — |
OEM-A34
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power ground (E03) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | DI injector confirmation (IJF1) | — | — | — | — | — | — | — | — |
| 13 | High-pressure fuel pump spill valve (FPF) | — | — | — | — | — | — | — | — |
| 14 | VVT cam sensor exhaust bank 1 (EV1+) | — | W28 | — | 0.5 | EMUBLACK-Black-21 | — | — | — |
| 15 | VVT cam sensor intake bank 2 (VV2+) | — | — | — | — | — | — | — | — |
| 16 | Crank position (NE+) | — | W27 | — | 0.5 | EMUBLACK-Black-8 | — | — | — |
| 17 | Knock sensor 2 (KNK2) | — | W32 | — | 0.5 | EMUBLACK-Black-16 | — | — | — |
| 18 | A/F ratio sensor (A1A-) | — | — | — | — | — | — | — | — |
| 19 | A/F ratio sensor (A1A+) | — | — | — | — | — | — | — | — |
| 2 | Power ground (E04) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Manifold absolute pressure (PIM) | — | W56 | — | 0.5 | EMUBLACK-Black-4 | — | — | — |
| 21 | Heated oxygen sensor (OX1B, rear) | — | W61 | — | 0.5 | EMUBLACK-Black-37 | — | — | — |
| 25 | VVT cam sensor exhaust bank 2 (EV2+) | — | W30 | — | 0.5 | EMUBLACK-Black-20 | — | — | — |
| 26 | VVT cam sensor intake bank 1 (VV1+) | — | W29 | — | 0.5 | EMUBLACK-Black-7 | — | — | — |
| 27 | Crank position return (NE-) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 28 | Knock sensor 1 (KNK1) | — | W31 | — | 0.5 | EMUBLACK-Black-3 | — | — | — |
| 29 | Shield ground (EKNK) | — | — | — | — | — | — | — | — |
| 3 | Power ground (E05) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Shield ground (SLE1) | — | — | — | — | — | — | — | — |
| 31 | DI injector confirmation (IJF2) | — | — | — | — | — | — | — | — |
| 32 | High-pressure fuel pump spill valve (FPD) | — | — | — | — | — | — | — | — |
| 34 | OCV power source (VCV, 5V) | — | W22 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Shield ground (SLE3) | — | — | — | — | — | — | — | — |
| 5 | A/F ratio sensor heater (HA1A) | — | W54 | — | 0.5 | EMUBLACK-Grey-19 | — | — | — |
| 6 | ECU power (+B, main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Fuel pressure sensor (PR) | — | — | — | — | — | — | — | — |
OEM-A35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Canister vent valve (VPMP) | — | — | — | — | — | — | — | — |
| 10 | Fuel pump control monitor (DI) | — | — | — | — | — | — | — | — |
| 11 | Cooling fan relay 3 (FAN1) | — | W48 | — | 0.5 | EMUBLACK-Grey-5 | — | — | — |
| 12 | Cooling fan relay 2 (FAN2) | — | W47 | — | 0.5 | EMUBLACK-Grey-13 | — | — | — |
| 13 | EFI main relay 1 (SSHUT) | — | W46 | — | 0.5 | EMUBLACK-Grey-21 | — | — | — |
| 15 | Tachometer output (TACH) | — | — | — | — | — | — | — | — |
| 17 | ETCS relay (MCR) | — | W50 | — | 0.5 | EMUBLACK-Grey-12 | — | — | — |
| 19 | Fuel pump control (FPC) | — | — | — | — | — | — | — | — |
| 20 | Canister pressure sensor (PPMP) | — | — | — | — | — | — | — | — |
| 21 | Accelerator pedal 5V supply (VCPA) | — | W23 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Accelerator pedal 5V supply (VCP2) | — | W24 | — | 0.5 | SP-5V1-1 | — | — | — |
| 23 | Accelerator pedal position (VPA) | — | W59 | — | 0.5 | EMUBLACK-Black-30 | — | — | — |
| 26 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 29 | Accelerator pedal ground (EPA) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Accelerator pedal ground (EPA2) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | Accelerator pedal position 2 (VPA2) | — | W57 | — | 0.5 | EMUBLACK-Black-18 | — | — | — |
| 35 | A/C clutch relay (AC) | — | W51 | — | 0.5 | EMUBLACK-Grey-4 | — | — | — |
| 5 | Injector relay (IREL) | — | W52 | — | 0.5 | EMUBLACK-Grey-11 | — | — | — |
| 7 | ETCS relay (+BM) | — | W53 | — | 0.5 | EMUBLACK-Grey-3 | — | — | — |
| 8 | Leak detection pump (MPMP) | — | — | — | — | — | — | — | — |
OEM-A36
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Throttle actuator motor - (M-) | — | W44 | — | 0.5 | EMUBLACK-Grey-10 | — | — | — |
| 10 | Ignition coil 2 (IGT2) | — | W34 | — | 0.5 | EMUBLACK-Grey-16 | — | — | — |
| 11 | Purge valve (PRG) | — | — | — | — | — | — | — | — |
| 12 | Injector 1 port (#10) | — | W37 | — | 0.5 | EMUBLACK-Grey-7 | — | — | — |
| 13 | Injector 4 port (#40) | — | — | — | — | — | — | — | — |
| 14 | Injector 1 direct (#1) | — | W38 | — | 0.5 | EMUBLACK-Grey-15 | — | — | — |
| 16 | OCV intake bank 2 (OC2) | — | — | — | — | — | — | — | — |
| 17 | OCV intake bank 1 (OC1) | — | — | — | — | — | — | — | — |
| 18 | Throttle position (VTA1) | — | W60 | — | 0.5 | EMUBLACK-Black-35 | — | — | — |
| 19 | Sensor 5V supply (VC) | — | W25 | — | 0.5 | SP-5V1-1 | — | — | — |
| 2 | Throttle actuator motor + (M+) | — | W45 | — | 0.5 | EMUBLACK-Grey-2 | — | — | — |
| 20 | Oil temperature (OT) | — | W64 | — | 0.5 | EMUBLACK-Black-9 | — | — | — |
| 21 | Ignition coil 1 (IGT1) | — | W33 | — | 0.5 | EMUBLACK-Grey-8 | — | — | — |
| 22 | Injector 2 port (#20) | — | W39 | — | 0.5 | EMUBLACK-Grey-23 | — | — | — |
| 23 | Injector 4 direct (#4) | — | — | — | — | — | — | — | — |
| 24 | Injector 3 direct (#3) | — | W41 | — | 0.5 | EMUBLACK-Grey-14 | — | — | — |
| 25 | Injector 2 direct (#2) | — | W40 | — | 0.5 | EMUBLACK-Grey-6 | — | — | — |
| 28 | Throttle position 2 (VTA2) | — | W58 | — | 0.5 | EMUBLACK-Black-17 | — | — | — |
| 29 | Sensor ground (E1) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Power ground (E02) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Engine coolant temperature (THW) | — | W62 | — | 0.5 | EMUBLACK-Black-32 | — | — | — |
| 31 | Ignition coil 3 (IGT3) | — | W35 | — | 0.5 | EMUBLACK-Grey-9 | — | — | — |
| 32 | Injector 3 port (#30) | — | W42 | — | 0.5 | EMUBLACK-Grey-22 | — | — | — |
| 4 | Power ground (E01) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | OCV exhaust bank 2 (OE2) | — | — | — | — | — | — | — | — |
| 6 | Heated oxygen sensor heater (HT1B) | — | — | — | — | — | — | — | — |
| 7 | OCV exhaust bank 1 (OE1) | — | — | — | — | — | — | — | — |
| 8 | Ignition coil 4 (IGT4) | — | W36 | — | 0.5 | EMUBLACK-Black-14 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W14 | — | 0.5 | OEM-A33-29 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-A34-27 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-A35-29 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-A35-30 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-A36-29 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | EMUBLACK-Black-29 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | EMUBLACK-Black-38 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | EMUBLACK-Black-39 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A33-1 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A34-6 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | EMUBLACK-Black-13 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W22 | — | 0.5 | OEM-A34-34 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-A35-21 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-A35-22 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | OEM-A36-19 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | EMUBLACK-Black-26 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-A33-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A34-1 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A34-2 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A34-3 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-A36-3 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-A36-4 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | EMUBLACK-Black-27 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | EMUBLACK-Black-28 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | EMUBLACK-Grey-17 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | EMUBLACK-Grey-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A33-1 | ECU power (+B2, main relay) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-A33-12 | Intake air temperature (THA, in MAF) | temp_in | EMUBLACK-Black-5 | CLT In | temp_in | single_source | |
| OEM-A33-14 | Starter signal (STSW2) | digital_in | EMUBLACK-Black-10 | Switch #1 In | digital_in | single_source | |
| OEM-A33-15 | Clutch switch (CLSW) | digital_in | EMUBLACK-Black-23 | Switch #2 In | digital_in | single_source | |
| OEM-A33-16 | Neutral switch (NSW) | digital_in | EMUBLACK-Black-36 | Switch #3 In | digital_in | single_source | |
| OEM-A33-17 | Starter signal (STSW2) | digital_in | — | — | — | single_source | |
| OEM-A33-18 | CAN low (CANL) | can_l | EMUBLACK-Black-25 | CAN L | can_l | single_source | |
| OEM-A33-19 | CAN high (CANH) | can_h | EMUBLACK-Black-12 | CAN H | can_h | single_source | |
| OEM-A33-2 | Battery constant (BATT, memory) | power_in | — | — | — | single_source | |
| OEM-A33-20 | Blower relay (HB) | low_side_out | EMUBLACK-Grey-20 | AUX 4 / Tacho | low_side_out | single_source | |
| OEM-A33-22 | Mass air flow (VG) | analog_in | EMUBLACK-Black-31 | Analog In #1 | analog_in | single_source | |
| OEM-A33-27 | Ignition switch sense (IGSW, IG2 relay) | digital_in | EMUBLACK-Grey-18 | Ignition +12V | digital_in | single_source | |
| OEM-A33-28 | Shield ground (SLE2) | shield | — | — | — | single_source | |
| OEM-A33-29 | MAF sensor ground (E2G) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A33-3 | Stop light switch (ST1-) | digital_in | — | — | — | single_source | |
| OEM-A33-4 | Power ground (EC) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A33-7 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-A33-8 | A/C pressure sensor (ACP) | analog_in | — | — | — | single_source | |
| OEM-A34-1 | Power ground (E03) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A34-11 | DI injector confirmation (IJF1) | analog_in | — | — | — | single_source | |
| OEM-A34-13 | High-pressure fuel pump spill valve (FPF) | low_side_out | — | — | — | single_source | |
| OEM-A34-14 | VVT cam sensor exhaust bank 1 (EV1+) | trigger_in | EMUBLACK-Black-21 | Camsync In #1 | trigger_in | single_source | |
| OEM-A34-15 | VVT cam sensor intake bank 2 (VV2+) | trigger_in | — | — | — | single_source | |
| OEM-A34-16 | Crank position (NE+) | trigger_in | EMUBLACK-Black-8 | Primary trigger | trigger_in | single_source | |
| OEM-A34-17 | Knock sensor 2 (KNK2) | knock_in | EMUBLACK-Black-16 | Knock Sensor in #2 | knock_in | single_source | |
| OEM-A34-18 | A/F ratio sensor (A1A-) | — | — | — | — | single_source | |
| OEM-A34-19 | A/F ratio sensor (A1A+) | — | — | — | — | single_source | |
| OEM-A34-2 | Power ground (E04) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A34-20 | Manifold absolute pressure (PIM) | analog_in | EMUBLACK-Black-4 | Analog In #2 | analog_in | single_source | |
| OEM-A34-21 | Heated oxygen sensor (OX1B, rear) | lambda_nb_in | EMUBLACK-Black-37 | Analog In #6 | analog_in | single_source | |
| OEM-A34-25 | VVT cam sensor exhaust bank 2 (EV2+) | trigger_in | EMUBLACK-Black-20 | VSS In | digital_in | single_source | |
| OEM-A34-26 | VVT cam sensor intake bank 1 (VV1+) | trigger_in | EMUBLACK-Black-7 | Camsync In #2 | trigger_in | single_source | |
| OEM-A34-27 | Crank position return (NE-) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A34-28 | Knock sensor 1 (KNK1) | knock_in | EMUBLACK-Black-3 | Knock Sensor in #1 | knock_in | single_source | |
| OEM-A34-29 | Shield ground (EKNK) | shield | — | — | — | single_source | |
| OEM-A34-3 | Power ground (E05) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A34-30 | Shield ground (SLE1) | shield | — | — | — | single_source | |
| OEM-A34-31 | DI injector confirmation (IJF2) | analog_in | — | — | — | single_source | |
| OEM-A34-32 | High-pressure fuel pump spill valve (FPD) | low_side_out | — | — | — | single_source | |
| OEM-A34-34 | OCV power source (VCV, 5V) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-A34-35 | Shield ground (SLE3) | shield | — | — | — | single_source | |
| OEM-A34-5 | A/F ratio sensor heater (HA1A) | low_side_out | EMUBLACK-Grey-19 | WBO Heater | low_side_out | single_source | |
| OEM-A34-6 | ECU power (+B, main relay) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-A34-9 | Fuel pressure sensor (PR) | analog_in | — | — | — | single_source | |
| OEM-A35-1 | Canister vent valve (VPMP) | low_side_out | — | — | — | single_source | |
| OEM-A35-10 | Fuel pump control monitor (DI) | analog_in | — | — | — | single_source | |
| OEM-A35-11 | Cooling fan relay 3 (FAN1) | low_side_out | EMUBLACK-Grey-5 | AUX 3 | low_side_out | single_source | |
| OEM-A35-12 | Cooling fan relay 2 (FAN2) | low_side_out | EMUBLACK-Grey-13 | AUX 2 / Injector #8 | low_side_out | single_source | |
| OEM-A35-13 | EFI main relay 1 (SSHUT) | low_side_out | EMUBLACK-Grey-21 | AUX 1 / Injector #7 | low_side_out | single_source | |
| OEM-A35-15 | Tachometer output (TACH) | tacho_out | — | — | — | single_source | |
| OEM-A35-17 | ETCS relay (MCR) | low_side_out | EMUBLACK-Grey-12 | AUX 5 | low_side_out | single_source | |
| OEM-A35-19 | Fuel pump control (FPC) | low_side_out | — | — | — | single_source | |
| OEM-A35-20 | Canister pressure sensor (PPMP) | analog_in | — | — | — | single_source | |
| OEM-A35-21 | Accelerator pedal 5V supply (VCPA) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-A35-22 | Accelerator pedal 5V supply (VCP2) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-A35-23 | Accelerator pedal position (VPA) | analog_in | EMUBLACK-Black-30 | Analog In #4 | analog_in | single_source | |
| OEM-A35-26 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-A35-29 | Accelerator pedal ground (EPA) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A35-30 | Accelerator pedal ground (EPA2) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A35-31 | Accelerator pedal position 2 (VPA2) | analog_in | EMUBLACK-Black-18 | TPS In | analog_in | single_source | |
| OEM-A35-35 | A/C clutch relay (AC) | low_side_out | EMUBLACK-Grey-4 | AUX 6 | low_side_out | single_source | |
| OEM-A35-5 | Injector relay (IREL) | low_side_out | EMUBLACK-Grey-11 | H-Bridge #2 Winding B | hbridge_out | single_source | |
| OEM-A35-7 | ETCS relay (+BM) | low_side_out | EMUBLACK-Grey-3 | H-Bridge #2 Winding A | hbridge_out | single_source | |
| OEM-A35-8 | Leak detection pump (MPMP) | low_side_out | — | — | — | single_source | |
| OEM-A36-1 | Throttle actuator motor - (M-) | hbridge_out | EMUBLACK-Grey-10 | H-Bridge #1 Winding B | hbridge_out | single_source | |
| OEM-A36-10 | Ignition coil 2 (IGT2) | ignition_out | EMUBLACK-Grey-16 | Ignition coil #2 | ignition_out | single_source | |
| OEM-A36-11 | Purge valve (PRG) | low_side_out | — | — | — | single_source | |
| OEM-A36-12 | Injector 1 port (#10) | injector_out | EMUBLACK-Grey-7 | Injector #1 | injector_out | single_source | |
| OEM-A36-13 | Injector 4 port (#40) | injector_out | — | — | — | single_source | |
| OEM-A36-14 | Injector 1 direct (#1) | injector_out | EMUBLACK-Grey-15 | Injector #2 | injector_out | single_source | |
| OEM-A36-16 | OCV intake bank 2 (OC2) | low_side_out | — | — | — | single_source | |
| OEM-A36-17 | OCV intake bank 1 (OC1) | low_side_out | — | — | — | single_source | |
| OEM-A36-18 | Throttle position (VTA1) | analog_in | EMUBLACK-Black-35 | Analog In #5 | analog_in | single_source | |
| OEM-A36-19 | Sensor 5V supply (VC) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-A36-2 | Throttle actuator motor + (M+) | hbridge_out | EMUBLACK-Grey-2 | H-Bridge #1 Winding A | hbridge_out | single_source | |
| OEM-A36-20 | Oil temperature (OT) | temp_in | EMUBLACK-Black-9 | Flex Fuel In | analog_in | single_source | |
| OEM-A36-21 | Ignition coil 1 (IGT1) | ignition_out | EMUBLACK-Grey-8 | Ignition coil #1 | ignition_out | single_source | |
| OEM-A36-22 | Injector 2 port (#20) | injector_out | EMUBLACK-Grey-23 | Injector #3 | injector_out | single_source | |
| OEM-A36-23 | Injector 4 direct (#4) | injector_out | — | — | — | single_source | |
| OEM-A36-24 | Injector 3 direct (#3) | injector_out | EMUBLACK-Grey-14 | Injector #5 | injector_out | single_source | |
| OEM-A36-25 | Injector 2 direct (#2) | injector_out | EMUBLACK-Grey-6 | Injector #4 | injector_out | single_source | |
| OEM-A36-28 | Throttle position 2 (VTA2) | analog_in | EMUBLACK-Black-17 | Analog In #3 | analog_in | single_source | |
| OEM-A36-29 | Sensor ground (E1) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A36-3 | Power ground (E02) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A36-30 | Engine coolant temperature (THW) | temp_in | EMUBLACK-Black-32 | IAT In | temp_in | single_source | |
| OEM-A36-31 | Ignition coil 3 (IGT3) | ignition_out | EMUBLACK-Grey-9 | Ignition coil #3 | ignition_out | single_source | |
| OEM-A36-32 | Injector 3 port (#30) | injector_out | EMUBLACK-Grey-22 | Injector #6 | injector_out | single_source | |
| OEM-A36-4 | Power ground (E01) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A36-5 | OCV exhaust bank 2 (OE2) | low_side_out | — | — | — | single_source | |
| OEM-A36-6 | Heated oxygen sensor heater (HT1B) | low_side_out | — | — | — | single_source | |
| OEM-A36-7 | OCV exhaust bank 1 (OE1) | low_side_out | — | — | — | single_source | |
| OEM-A36-8 | Ignition coil 4 (IGT4) | ignition_out | EMUBLACK-Black-14 | Ignition coil #4 | ignition_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | no route | ECU power (+B2, main relay) | — | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | no route | ECU power (+B, main relay) | — | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | no route | Battery +12V | — | |
| W4 | OEM-A33-4 | SP-GND-1 | 0.85 | no route | Power ground (EC) | — | |
| W5 | OEM-A34-1 | SP-GND-1 | 0.85 | no route | Power ground (E03) | — | |
| W6 | OEM-A34-2 | SP-GND-1 | 0.85 | no route | Power ground (E04) | — | |
| W7 | OEM-A34-3 | SP-GND-1 | 0.85 | no route | Power ground (E05) | — | |
| W8 | OEM-A36-3 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W9 | OEM-A36-4 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W10 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | no route | Power Ground | — | |
| W11 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | no route | Ecu Ground | — | |
| W12 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | no route | Power Ground | — | |
| W13 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | no route | Power Ground | — | |
| W14 | OEM-A33-29 | SP-0V-1 | 0.5 | no route | MAF sensor ground (E2G) | — | |
| W15 | OEM-A34-27 | SP-0V-1 | 0.5 | no route | Crank position return (NE-) | — | |
| W16 | OEM-A35-29 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA) | — | |
| W17 | OEM-A35-30 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA2) | — | |
| W18 | OEM-A36-29 | SP-0V-1 | 0.5 | no route | Sensor ground (E1) | — | |
| W19 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | no route | Sensor Ground | — | |
| W20 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | no route | Sensor Ground | — | |
| W21 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | no route | Sensor Ground | — | |
| W22 | OEM-A34-34 | SP-5V1-1 | 0.5 | no route | OCV power source (VCV, 5V) | — | |
| W23 | OEM-A35-21 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCPA) | — | |
| W24 | OEM-A35-22 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCP2) | — | |
| W25 | OEM-A36-19 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VC) | — | |
| W26 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | no route | +5V supply | — | |
| W27 | OEM-A34-16 | EMUBLACK-Black-8 | 0.5 | no route | Crank position (NE+) | — | |
| W28 | OEM-A34-14 | EMUBLACK-Black-21 | 0.5 | no route | VVT cam sensor exhaust bank 1 (EV1+) | — | |
| W29 | OEM-A34-26 | EMUBLACK-Black-7 | 0.5 | no route | VVT cam sensor intake bank 1 (VV1+) | — | |
| W30 | OEM-A34-25 | EMUBLACK-Black-20 | 0.5 | no route | VVT cam sensor exhaust bank 2 (EV2+) | — | |
| W31 | OEM-A34-28 | EMUBLACK-Black-3 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W32 | OEM-A34-17 | EMUBLACK-Black-16 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W33 | OEM-A36-21 | EMUBLACK-Grey-8 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W34 | OEM-A36-10 | EMUBLACK-Grey-16 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W35 | OEM-A36-31 | EMUBLACK-Grey-9 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W36 | OEM-A36-8 | EMUBLACK-Black-14 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W37 | OEM-A36-12 | EMUBLACK-Grey-7 | 0.5 | no route | Injector 1 port (#10) | — | |
| W38 | OEM-A36-14 | EMUBLACK-Grey-15 | 0.5 | no route | Injector 1 direct (#1) | — | |
| W39 | OEM-A36-22 | EMUBLACK-Grey-23 | 0.5 | no route | Injector 2 port (#20) | — | |
| W40 | OEM-A36-25 | EMUBLACK-Grey-6 | 0.5 | no route | Injector 2 direct (#2) | — | |
| W41 | OEM-A36-24 | EMUBLACK-Grey-14 | 0.5 | no route | Injector 3 direct (#3) | — | |
| W42 | OEM-A36-32 | EMUBLACK-Grey-22 | 0.5 | no route | Injector 3 port (#30) | — | |
| W43 | OEM-A33-27 | EMUBLACK-Grey-18 | 0.5 | no route | Ignition switch sense (IGSW, IG2 relay) | — | |
| W44 | OEM-A36-1 | EMUBLACK-Grey-10 | 0.5 | no route | Throttle actuator motor - (M-) | — | |
| W45 | OEM-A36-2 | EMUBLACK-Grey-2 | 0.5 | no route | Throttle actuator motor + (M+) | — | |
| W46 | OEM-A35-13 | EMUBLACK-Grey-21 | 0.5 | no route | EFI main relay 1 (SSHUT) | — | |
| W47 | OEM-A35-12 | EMUBLACK-Grey-13 | 0.5 | no route | Cooling fan relay 2 (FAN2) | — | |
| W48 | OEM-A35-11 | EMUBLACK-Grey-5 | 0.5 | no route | Cooling fan relay 3 (FAN1) | — | |
| W49 | OEM-A33-20 | EMUBLACK-Grey-20 | 0.5 | no route | Blower relay (HB) | — | |
| W50 | OEM-A35-17 | EMUBLACK-Grey-12 | 0.5 | no route | ETCS relay (MCR) | — | |
| W51 | OEM-A35-35 | EMUBLACK-Grey-4 | 0.5 | no route | A/C clutch relay (AC) | — | |
| W52 | OEM-A35-5 | EMUBLACK-Grey-11 | 0.5 | no route | Injector relay (IREL) | — | |
| W53 | OEM-A35-7 | EMUBLACK-Grey-3 | 0.5 | no route | ETCS relay (+BM) | — | |
| W54 | OEM-A34-5 | EMUBLACK-Grey-19 | 0.5 | no route | A/F ratio sensor heater (HA1A) | — | |
| W55 | OEM-A33-22 | EMUBLACK-Black-31 | 0.5 | no route | Mass air flow (VG) | — | |
| W56 | OEM-A34-20 | EMUBLACK-Black-4 | 0.5 | no route | Manifold absolute pressure (PIM) | — | |
| W57 | OEM-A35-31 | EMUBLACK-Black-18 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W58 | OEM-A36-28 | EMUBLACK-Black-17 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W59 | OEM-A35-23 | EMUBLACK-Black-30 | 0.5 | no route | Accelerator pedal position (VPA) | — | |
| W60 | OEM-A36-18 | EMUBLACK-Black-35 | 0.5 | no route | Throttle position (VTA1) | — | |
| W61 | OEM-A34-21 | EMUBLACK-Black-37 | 0.5 | no route | Heated oxygen sensor (OX1B, rear) | — | |
| W62 | OEM-A36-30 | EMUBLACK-Black-32 | 0.5 | no route | Engine coolant temperature (THW) | — | |
| W63 | OEM-A33-12 | EMUBLACK-Black-5 | 0.5 | no route | Intake air temperature (THA, in MAF) | — | |
| W64 | OEM-A36-20 | EMUBLACK-Black-9 | 0.5 | no route | Oil temperature (OT) | — | |
| W65 | OEM-A33-14 | EMUBLACK-Black-10 | 0.5 | no route | Starter signal (STSW2) | — | |
| W66 | OEM-A33-15 | EMUBLACK-Black-23 | 0.5 | no route | Clutch switch (CLSW) | — | |
| W67 | OEM-A33-16 | EMUBLACK-Black-36 | 0.5 | no route | Neutral switch (NSW) | — | |
| W68 | OEM-A33-19 | EMUBLACK-Black-12 | 0.5 | no route | CAN high (CANH) | — | |
| W69 | OEM-A33-18 | EMUBLACK-Black-25 | 0.5 | no route | CAN low (CANL) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (10)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 1 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | REQUIRED_UNMAPPED | OEM-A36-13 | Required OEM function "Injector 4 port (#40)" (injector_out) is not connected to the new ECU. |
| warn | DBW_MOTOR_CURRENT | EMUBLACK-Grey-10 | Cannot confirm EMU Black can drive the throttle motor: EMUBLACK-Grey-10 "H-Bridge #1 Winding B" is rated 6.5 A, but the motor current at OEM-A36-1 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | EMUBLACK-Grey-2 | Cannot confirm EMU Black can drive the throttle motor: EMUBLACK-Grey-2 "H-Bridge #1 Winding A" is rated 6.5 A, but the motor current at OEM-A36-2 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | NET_FAMILY | OEM-A34-25 ↔ EMUBLACK-Black-20 | OEM-A34-25 "VVT cam sensor exhaust bank 2 (EV2+)" [trigger_in] is wired to EMUBLACK-Black-20 "VSS In" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-A35-5 ↔ EMUBLACK-Grey-11 | OEM-A35-5 "Injector relay (IREL)" [low_side_out] is wired to EMUBLACK-Grey-11 "H-Bridge #2 Winding B" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-A35-7 ↔ EMUBLACK-Grey-3 | OEM-A35-7 "ETCS relay (+BM)" [low_side_out] is wired to EMUBLACK-Grey-3 "H-Bridge #2 Winding A" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NO_FUEL_PUMP | fuel pump | This engine harness has no fuel-pump control path: no fuel-pump relay output is wired to the new ECU. If the stock car switches the pump outside the ECU (an airflow-meter contact or a separate module), the standalone must drive the pump relay itself — see the install notes for this car. |
| info | NET_FAMILY | OEM-A36-20 ↔ EMUBLACK-Black-9 | OEM-A36-20 "Oil temperature (OT)" [temp_in] is wired to EMUBLACK-Black-9 "Flex Fuel In" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 30 optional OEM pins are not mapped: OEM-A33-17 Starter signal (STSW2); OEM-A33-28 Shield ground (SLE2); OEM-A33-3 Stop light switch (ST1-); OEM-A33-7 Stop light switch (STP); OEM-A33-8 A/C pressure sensor (ACP); OEM-A34-11 DI injector confirmation (IJF1); OEM-A34-13 High-pressure fuel pump spill valve (FPF); OEM-A34-15 VVT cam sensor intake bank 2 (VV2+); OEM-A34-18 A/F ratio sensor (A1A-); OEM-A34-19 A/F ratio sensor (A1A+); OEM-A34-29 Shield ground (EKNK); OEM-A34-30 Shield ground (SLE1); OEM-A34-31 DI injector confirmation (IJF2); OEM-A34-32 High-pressure fuel pump spill valve (FPD); OEM-A34-35 Shield ground (SLE3); OEM-A34-9 Fuel pressure sensor (PR); OEM-A35-1 Canister vent valve (VPMP); OEM-A35-10 Fuel pump control monitor (DI); OEM-A35-15 Tachometer output (TACH); OEM-A35-19 Fuel pump control (FPC); OEM-A35-20 Canister pressure sensor (PPMP); OEM-A35-26 Starter signal (STA); OEM-A35-8 Leak detection pump (MPMP); OEM-A36-11 Purge valve (PRG); OEM-A36-16 OCV intake bank 2 (OC2); OEM-A36-17 OCV intake bank 1 (OC1); OEM-A36-23 Injector 4 direct (#4); OEM-A36-5 OCV exhaust bank 2 (OE2); OEM-A36-6 Heated oxygen sensor heater (HT1B); OEM-A36-7 OCV exhaust bank 1 (OE1) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-A33-2 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-09. Review every wire against both manuals before building. Open items: - OEM-A36 13: Injector 4 port (#40): no free injector output on ECUMASTER EMU Black Not wired: - OEM-A33 2: Battery constant (BATT, memory): ECUMASTER EMU Black has no battery-constant input; not needed - OEM-A34 15: VVT cam sensor intake bank 2 (VV2+): no free cam_hall/cam_vr/frequency_in input on ECUMASTER EMU Black - OEM-A36 23: Injector 4 direct (#4): no free injector output on ECUMASTER EMU Black - OEM-A33 28: Shield ground (SLE2): no shield pin on ECUMASTER EMU Black - OEM-A34 29: Shield ground (EKNK): no shield pin on ECUMASTER EMU Black - OEM-A34 30: Shield ground (SLE1): no shield pin on ECUMASTER EMU Black - OEM-A34 35: Shield ground (SLE3): no shield pin on ECUMASTER EMU Black - OEM-A36 6: Heated oxygen sensor heater (HT1B): no free heater_low_side/low_side/ls_hs/hbridge on ECUMASTER EMU Black - OEM-A36 17: OCV intake bank 1 (OC1): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A36 7: OCV exhaust bank 1 (OE1): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A36 16: OCV intake bank 2 (OC2): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A36 5: OCV exhaust bank 2 (OE2): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A34 13: High-pressure fuel pump spill valve (FPF): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A34 32: High-pressure fuel pump spill valve (FPD): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A35 1: Canister vent valve (VPMP): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A35 19: Fuel pump control (FPC): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A35 8: Leak detection pump (MPMP): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A36 11: Purge valve (PRG): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-A35 15: Tachometer output (TACH): no free tacho/frequency_out/low_side/ls_hs on ECUMASTER EMU Black - OEM-A33 8: A/C pressure sensor (ACP): no free analog_0_5 on ECUMASTER EMU Black - OEM-A34 11: DI injector confirmation (IJF1): no free analog_0_5 on ECUMASTER EMU Black - OEM-A34 31: DI injector confirmation (IJF2): no free analog_0_5 on ECUMASTER EMU Black - OEM-A34 9: Fuel pressure sensor (PR): no free analog_0_5 on ECUMASTER EMU Black - OEM-A35 10: Fuel pump control monitor (DI): no free analog_0_5 on ECUMASTER EMU Black - OEM-A35 20: Canister pressure sensor (PPMP): no free analog_0_5 on ECUMASTER EMU Black - OEM-A33 17: Starter signal (STSW2): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-A33 3: Stop light switch (ST1-): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-A33 7: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-A35 26: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-A34 18: A/F ratio sensor (A1A-): not classified in the library; wire by hand - OEM-A34 19: A/F ratio sensor (A1A+): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER EMU Black — pinout (Black 39-pin / Grey 24-pin) | https://www.ecumaster.com/wp/wp-content/uploads/2020/05/EMU_Black_pinout.pdf | archive | 2026-10-05 | 096b2b4df1bd |
| 4 | vendor_doc | Scion FR-S / Toyota 86 Repair Manual (2013) — FA20 ECM terminal pinout (SFI system) | https://gt86.me/images/0/09/2013_Scion_FR-S_Repair_Manual.pdf | — | — | — |