Toyota 86 (ZN6, FA20) → ECUMASTER EMU PRO 16 (auto)
Toyota 86 (ZN6, FA20) — ECUMASTER — EMU PRO 16
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-09
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 93 wires · 12 connectors · 5 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A33-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A34-1 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A34-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A34-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A36-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-A36-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A33-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A34-27 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-A35-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-A35-30 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-A36-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-A34-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A35-21 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-A35-22 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-A36-19 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-5V1-1 | EMUPRO16-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-A34-16 | EMUPRO16-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A34-28 | EMUPRO16-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-A34-17 | EMUPRO16-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-A36-21 | EMUPRO16-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-A36-10 | EMUPRO16-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-A36-31 | EMUPRO16-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-A36-8 | EMUPRO16-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A36-12 | EMUPRO16-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A36-14 | EMUPRO16-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A36-22 | EMUPRO16-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A36-25 | EMUPRO16-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A36-24 | EMUPRO16-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A36-32 | EMUPRO16-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A36-13 | EMUPRO16-A-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A36-23 | EMUPRO16-A-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A33-27 | EMUPRO16-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A36-1 | EMUPRO16-C-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A36-2 | EMUPRO16-C-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A35-13 | EMUPRO16-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A35-12 | EMUPRO16-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A35-11 | EMUPRO16-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A33-20 | EMUPRO16-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-A35-17 | EMUPRO16-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-A35-35 | EMUPRO16-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-A35-5 | EMUPRO16-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A35-7 | EMUPRO16-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-A34-5 | EMUPRO16-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-A36-6 | EMUPRO16-C-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A36-17 | EMUPRO16-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A36-7 | EMUPRO16-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-A36-16 | EMUPRO16-D-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-A36-5 | EMUPRO16-D-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-A34-13 | EMUPRO16-D-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-A34-32 | EMUPRO16-D-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-A35-1 | EMUPRO16-D-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-A35-19 | EMUPRO16-D-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-A35-8 | EMUPRO16-D-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-A36-11 | EMUPRO16-D-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-A33-22 | EMUPRO16-C-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-A34-20 | EMUPRO16-C-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-A35-31 | EMUPRO16-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-A36-28 | EMUPRO16-C-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-A35-23 | EMUPRO16-C-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-A36-18 | EMUPRO16-C-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-A34-21 | EMUPRO16-C-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-A36-30 | EMUPRO16-C-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-A33-12 | EMUPRO16-C-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-A36-20 | EMUPRO16-D-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-A33-8 | EMUPRO16-C-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-A34-11 | EMUPRO16-D-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-A34-31 | EMUPRO16-C-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W82 | OEM-A34-9 | EMUPRO16-D-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W83 | OEM-A35-10 | EMUPRO16-C-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W84 | OEM-A35-20 | EMUPRO16-D-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W85 | OEM-A33-14 | EMUPRO16-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W86 | OEM-A33-15 | EMUPRO16-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W87 | OEM-A33-16 | EMUPRO16-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W88 | OEM-A33-17 | EMUPRO16-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W89 | OEM-A33-3 | EMUPRO16-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W90 | OEM-A33-7 | EMUPRO16-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W91 | OEM-A35-26 | EMUPRO16-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W92 | OEM-A33-19 | EMUPRO16-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W93 | OEM-A33-18 | EMUPRO16-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUPRO16-B-14 | EMUPRO16-A-11 | open (OL) | +12 V supply must not touch power ground | |
| 2 | EMUPRO16-B-14 | EMUPRO16-A-20 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | EMUPRO16-A-11 | EMUPRO16-A-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | EMUPRO16-A-20 | EMUPRO16-A-12 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 5 | EMUPRO16-B-14 | EMUPRO16-A-12 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUPRO16-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 8 | — | — | — | — | — | — | — | — |
| 2 | Injector 1 | — | W38 | — | 0.5 | OEM-A36-12 | — | — | — |
| 3 | Injector 2 | — | W39 | — | 0.5 | OEM-A36-14 | — | — | — |
| 4 | Injector 3 | — | W40 | — | 0.5 | OEM-A36-22 | — | — | — |
| 5 | Injector 4 | — | W41 | — | 0.5 | OEM-A36-25 | — | — | — |
| 6 | Injector 5 | — | W42 | — | 0.5 | OEM-A36-24 | — | — | — |
| 7 | Injector 6 | — | W43 | — | 0.5 | OEM-A36-32 | — | — | — |
| 8 | Injector 7 | — | W44 | — | 0.5 | OEM-A36-13 | — | — | — |
| 9 | Injector 8 | — | W45 | — | 0.5 | OEM-A36-23 | — | — | — |
| 10 | Ignition 7 | — | — | — | — | — | — | — | — |
| 11 | Power GND | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | +5V source A | — | W30 | — | 0.5 | SP-5V1-1 | — | — | — |
| 13 | Digital 2 | — | W85 | — | 0.5 | OEM-A33-14 | — | — | — |
| 14 | Digital 4 | — | W87 | — | 0.5 | OEM-A33-16 | — | — | — |
| 15 | Digital 8 | — | W91 | — | 0.5 | OEM-A35-26 | — | — | — |
| 16 | Digital 6 (turbo) | — | W89 | — | 0.5 | OEM-A33-3 | — | — | — |
| 17 | Power GND | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition 6 | — | — | — | — | — | — | — | — |
| 19 | Power GND | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Digital GND | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Digital 1 (crank) | — | W31 | — | 0.5 | OEM-A34-16 | — | — | — |
| 22 | Digital 3 | — | W86 | — | 0.5 | OEM-A33-15 | — | — | — |
| 23 | Digital 7 | — | W90 | — | 0.5 | OEM-A33-7 | — | — | — |
| 24 | Digital 5 (turbo) | — | W88 | — | 0.5 | OEM-A33-17 | — | — | — |
| 25 | Auxiliary 9 | — | W57 | — | 0.5 | OEM-A34-5 | — | — | — |
| 26 | Ignition 5 | — | — | — | — | — | — | — | — |
| 27 | Ignition 4 | — | W37 | — | 0.5 | OEM-A36-8 | — | — | — |
| 28 | Ignition 3 | — | W36 | — | 0.5 | OEM-A36-31 | — | — | — |
| 29 | Ignition 2 | — | W35 | — | 0.5 | OEM-A36-10 | — | — | — |
| 30 | Ignition 1 | — | W34 | — | 0.5 | OEM-A36-21 | — | — | — |
| 31 | CAN 1 high (PC comm) | — | W92 | — | 0.5 | OEM-A33-19 | — | — | — |
| 32 | CAN 1 low (PC comm) | — | W93 | — | 0.5 | OEM-A33-18 | — | — | — |
| 33 | CAN 2 high | — | — | — | — | — | — | — | — |
| 34 | CAN 2 low | — | — | — | — | — | — | — | — |
EMUPRO16-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 1 (WBO heater) | — | W49 | — | 0.5 | OEM-A35-13 | — | — | — |
| 2 | Auxiliary 2 (WBO heater) | — | W50 | — | 0.5 | OEM-A35-12 | — | — | — |
| 3 | Auxiliary 3 (WBO heater) | — | W51 | — | 0.5 | OEM-A35-11 | — | — | — |
| 4 | Auxiliary 4 (WBO heater) | — | W52 | — | 0.5 | OEM-A33-20 | — | — | — |
| 5 | Auxiliary 5 | — | W53 | — | 0.5 | OEM-A35-17 | — | — | — |
| 6 | Auxiliary 6 | — | W54 | — | 0.5 | OEM-A35-35 | — | — | — |
| 7 | Auxiliary 7 | — | W55 | — | 0.5 | OEM-A35-5 | — | — | — |
| 8 | +12V supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Digital GND (flash drive) | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | USB D- (flash drive) | — | — | — | — | — | — | — | — |
| 11 | USB D+ (flash drive) | — | — | — | — | — | — | — | — |
| 12 | +5V source A (flash drive) | — | — | — | — | — | — | — | — |
| 13 | Auxiliary 8 | — | W56 | — | 0.5 | OEM-A35-7 | — | — | — |
| 14 | +12V supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 15 | +12V switched | — | W46 | — | 0.5 | OEM-A33-27 | — | — | — |
| 16 | Knock sensor 1 | — | W32 | — | 0.5 | OEM-A34-28 | — | — | — |
| 17 | Knock sensor 2 | — | W33 | — | 0.5 | OEM-A34-17 | — | — | — |
| 18 | WBO 2 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 19 | Power GND | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | WBO 1 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 21 | WBO 1 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 22 | WBO 1 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
| 23 | WBO 1 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 24 | WBO 2 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 25 | WBO 2 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 26 | WBO 2 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
EMUPRO16-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 10 | — | W58 | — | 0.5 | OEM-A36-6 | — | — | — |
| 2 | Auxiliary 11 | — | W59 | — | 0.5 | OEM-A36-17 | — | — | — |
| 3 | Auxiliary 12 | — | W60 | — | 0.5 | OEM-A36-7 | — | — | — |
| 4 | Analog 7 | — | W81 | — | 0.5 | OEM-A34-31 | — | — | — |
| 5 | Analog 10 (2k2 pull) | — | — | — | — | — | — | — | — |
| 6 | H-bridge 1A | — | W48 | — | 0.5 | OEM-A36-2 | — | — | — |
| 7 | H-bridge 2B | — | — | — | — | — | — | — | — |
| 8 | H-bridge 3A | — | — | — | — | — | — | — | — |
| 9 | H-bridge 2A | — | — | — | — | — | — | — | — |
| 10 | Analog 1 (MAP) | — | W70 | — | 0.5 | OEM-A34-20 | — | — | — |
| 11 | Analog 3 | — | W73 | — | 0.5 | OEM-A35-23 | — | — | — |
| 12 | Analog 5 | — | W77 | — | 0.5 | OEM-A33-12 | — | — | — |
| 13 | Analog 8 | — | W83 | — | 0.5 | OEM-A35-10 | — | — | — |
| 14 | Analog 11 (2k2 pull) | — | — | — | — | — | — | — | — |
| 15 | Analog 13 (1k pull) | — | — | — | — | — | — | — | — |
| 16 | Analog 15 (330R pull) | — | — | — | — | — | — | — | — |
| 17 | H-bridge 3B | — | — | — | — | — | — | — | — |
| 18 | Analog 2 | — | W71 | — | 0.5 | OEM-A35-31 | — | — | — |
| 19 | Analog 4 | — | W75 | — | 0.5 | OEM-A34-21 | — | — | — |
| 20 | Analog 6 | — | W79 | — | 0.5 | OEM-A33-8 | — | — | — |
| 21 | Analog 9 (2k2 pull) | — | — | — | — | — | — | — | — |
| 22 | Analog 12 (2k2 pull) | — | — | — | — | — | — | — | — |
| 23 | Analog 14 (1k pull) | — | — | — | — | — | — | — | — |
| 24 | Analog 16 (100R pull) | — | — | — | — | — | — | — | — |
| 25 | H-bridge 1B | — | W47 | — | 0.5 | OEM-A36-1 | — | — | — |
| 26 | LIN | — | — | — | — | — | — | — | — |
| 27 | +5V source B | — | — | — | — | — | — | — | — |
| 28 | +5V source B | — | — | — | — | — | — | — | — |
| 29 | Analog GND | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Power GND | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| 31 | Precision analog 1 | — | W69 | — | 0.5 | OEM-A33-22 | — | — | — |
| 32 | Precision analog 2 | — | W72 | — | 0.5 | OEM-A36-28 | — | — | — |
| 33 | Precision analog 3 | — | W74 | — | 0.5 | OEM-A36-18 | — | — | — |
| 34 | Precision analog 4 | — | W76 | — | 0.5 | OEM-A36-30 | — | — | — |
EMUPRO16-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 10 | — | W66 | — | 0.5 | OEM-A35-19 | — | — | — |
| 2 | Injector 11 | — | W67 | — | 0.5 | OEM-A35-8 | — | — | — |
| 3 | Injector 12 | — | W68 | — | 0.5 | OEM-A36-11 | — | — | — |
| 4 | Injector 13 | — | — | — | — | — | — | — | — |
| 5 | Injector 14 | — | — | — | — | — | — | — | — |
| 6 | Injector 15 | — | — | — | — | — | — | — | — |
| 7 | Injector 16 | — | — | — | — | — | — | — | — |
| 8 | Injector 9 | — | W65 | — | 0.5 | OEM-A35-1 | — | — | — |
| 9 | Analog 17 | — | — | — | — | — | — | — | — |
| 10 | Analog 18 | — | — | — | — | — | — | — | — |
| 11 | Digital 9 / Analog 19 | — | — | — | — | — | — | — | — |
| 12 | Digital 10 / Analog 20 | — | — | — | — | — | — | — | — |
| 13 | Auxiliary 13 | — | W61 | — | 0.5 | OEM-A36-16 | — | — | — |
| 14 | H-bridge 4A | — | — | — | — | — | — | — | — |
| 15 | Precision analog 6 | — | W80 | — | 0.5 | OEM-A34-11 | — | — | — |
| 16 | Precision analog 8 | — | W84 | — | 0.5 | OEM-A35-20 | — | — | — |
| 17 | Analog GND | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Power GND | — | W16 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Auxiliary 14 | — | W62 | — | 0.5 | OEM-A36-5 | — | — | — |
| 20 | H-bridge 4B | — | — | — | — | — | — | — | — |
| 21 | Precision analog 5 | — | W78 | — | 0.5 | OEM-A36-20 | — | — | — |
| 22 | Precision analog 7 | — | W82 | — | 0.5 | OEM-A34-9 | — | — | — |
| 23 | Ignition 9 | — | — | — | — | — | — | — | — |
| 24 | Ignition 10 | — | — | — | — | — | — | — | — |
| 25 | Auxiliary 16 | — | W64 | — | 0.5 | OEM-A34-32 | — | — | — |
| 26 | Auxiliary 15 | — | W63 | — | 0.5 | OEM-A34-13 | — | — | — |
OEM-A33
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU power (+B2, main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 12 | Intake air temperature (THA, in MAF) | — | W77 | — | 0.5 | EMUPRO16-C-12 | — | — | — |
| 14 | Starter signal (STSW2) | — | W85 | — | 0.5 | EMUPRO16-A-13 | — | — | — |
| 15 | Clutch switch (CLSW) | — | W86 | — | 0.5 | EMUPRO16-A-22 | — | — | — |
| 16 | Neutral switch (NSW) | — | W87 | — | 0.5 | EMUPRO16-A-14 | — | — | — |
| 17 | Starter signal (STSW2) | — | W88 | — | 0.5 | EMUPRO16-A-24 | — | — | — |
| 18 | CAN low (CANL) | — | W93 | — | 0.5 | EMUPRO16-A-32 | — | — | — |
| 19 | CAN high (CANH) | — | W92 | — | 0.5 | EMUPRO16-A-31 | — | — | — |
| 2 | Battery constant (BATT, memory) | — | — | — | — | — | — | — | — |
| 20 | Blower relay (HB) | — | W52 | — | 0.5 | EMUPRO16-B-4 | — | — | — |
| 22 | Mass air flow (VG) | — | W69 | — | 0.5 | EMUPRO16-C-31 | — | — | — |
| 27 | Ignition switch sense (IGSW, IG2 relay) | — | W46 | — | 0.5 | EMUPRO16-B-15 | — | — | — |
| 28 | Shield ground (SLE2) | — | — | — | — | — | — | — | — |
| 29 | MAF sensor ground (E2G) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Stop light switch (ST1-) | — | W89 | — | 0.5 | EMUPRO16-A-16 | — | — | — |
| 4 | Power ground (EC) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Stop light switch (STP) | — | W90 | — | 0.5 | EMUPRO16-A-23 | — | — | — |
| 8 | A/C pressure sensor (ACP) | — | W79 | — | 0.5 | EMUPRO16-C-20 | — | — | — |
OEM-A34
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power ground (E03) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | DI injector confirmation (IJF1) | — | W80 | — | 0.5 | EMUPRO16-D-15 | — | — | — |
| 13 | High-pressure fuel pump spill valve (FPF) | — | W63 | — | 0.5 | EMUPRO16-D-26 | — | — | — |
| 14 | VVT cam sensor exhaust bank 1 (EV1+) | — | — | — | — | — | — | — | — |
| 15 | VVT cam sensor intake bank 2 (VV2+) | — | — | — | — | — | — | — | — |
| 16 | Crank position (NE+) | — | W31 | — | 0.5 | EMUPRO16-A-21 | — | — | — |
| 17 | Knock sensor 2 (KNK2) | — | W33 | — | 0.5 | EMUPRO16-B-17 | — | — | — |
| 18 | A/F ratio sensor (A1A-) | — | — | — | — | — | — | — | — |
| 19 | A/F ratio sensor (A1A+) | — | — | — | — | — | — | — | — |
| 2 | Power ground (E04) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Manifold absolute pressure (PIM) | — | W70 | — | 0.5 | EMUPRO16-C-10 | — | — | — |
| 21 | Heated oxygen sensor (OX1B, rear) | — | W75 | — | 0.5 | EMUPRO16-C-19 | — | — | — |
| 25 | VVT cam sensor exhaust bank 2 (EV2+) | — | — | — | — | — | — | — | — |
| 26 | VVT cam sensor intake bank 1 (VV1+) | — | — | — | — | — | — | — | — |
| 27 | Crank position return (NE-) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 28 | Knock sensor 1 (KNK1) | — | W32 | — | 0.5 | EMUPRO16-B-16 | — | — | — |
| 29 | Shield ground (EKNK) | — | — | — | — | — | — | — | — |
| 3 | Power ground (E05) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Shield ground (SLE1) | — | — | — | — | — | — | — | — |
| 31 | DI injector confirmation (IJF2) | — | W81 | — | 0.5 | EMUPRO16-C-4 | — | — | — |
| 32 | High-pressure fuel pump spill valve (FPD) | — | W64 | — | 0.5 | EMUPRO16-D-25 | — | — | — |
| 34 | OCV power source (VCV, 5V) | — | W26 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Shield ground (SLE3) | — | — | — | — | — | — | — | — |
| 5 | A/F ratio sensor heater (HA1A) | — | W57 | — | 0.5 | EMUPRO16-A-25 | — | — | — |
| 6 | ECU power (+B, main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Fuel pressure sensor (PR) | — | W82 | — | 0.5 | EMUPRO16-D-22 | — | — | — |
OEM-A35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Canister vent valve (VPMP) | — | W65 | — | 0.5 | EMUPRO16-D-8 | — | — | — |
| 10 | Fuel pump control monitor (DI) | — | W83 | — | 0.5 | EMUPRO16-C-13 | — | — | — |
| 11 | Cooling fan relay 3 (FAN1) | — | W51 | — | 0.5 | EMUPRO16-B-3 | — | — | — |
| 12 | Cooling fan relay 2 (FAN2) | — | W50 | — | 0.5 | EMUPRO16-B-2 | — | — | — |
| 13 | EFI main relay 1 (SSHUT) | — | W49 | — | 0.5 | EMUPRO16-B-1 | — | — | — |
| 15 | Tachometer output (TACH) | — | — | — | — | — | — | — | — |
| 17 | ETCS relay (MCR) | — | W53 | — | 0.5 | EMUPRO16-B-5 | — | — | — |
| 19 | Fuel pump control (FPC) | — | W66 | — | 0.5 | EMUPRO16-D-1 | — | — | — |
| 20 | Canister pressure sensor (PPMP) | — | W84 | — | 0.5 | EMUPRO16-D-16 | — | — | — |
| 21 | Accelerator pedal 5V supply (VCPA) | — | W27 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Accelerator pedal 5V supply (VCP2) | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
| 23 | Accelerator pedal position (VPA) | — | W73 | — | 0.5 | EMUPRO16-C-11 | — | — | — |
| 26 | Starter signal (STA) | — | W91 | — | 0.5 | EMUPRO16-A-15 | — | — | — |
| 29 | Accelerator pedal ground (EPA) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Accelerator pedal ground (EPA2) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | Accelerator pedal position 2 (VPA2) | — | W71 | — | 0.5 | EMUPRO16-C-18 | — | — | — |
| 35 | A/C clutch relay (AC) | — | W54 | — | 0.5 | EMUPRO16-B-6 | — | — | — |
| 5 | Injector relay (IREL) | — | W55 | — | 0.5 | EMUPRO16-B-7 | — | — | — |
| 7 | ETCS relay (+BM) | — | W56 | — | 0.5 | EMUPRO16-B-13 | — | — | — |
| 8 | Leak detection pump (MPMP) | — | W67 | — | 0.5 | EMUPRO16-D-2 | — | — | — |
OEM-A36
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Throttle actuator motor - (M-) | — | W47 | — | 0.5 | EMUPRO16-C-25 | — | — | — |
| 10 | Ignition coil 2 (IGT2) | — | W35 | — | 0.5 | EMUPRO16-A-29 | — | — | — |
| 11 | Purge valve (PRG) | — | W68 | — | 0.5 | EMUPRO16-D-3 | — | — | — |
| 12 | Injector 1 port (#10) | — | W38 | — | 0.5 | EMUPRO16-A-2 | — | — | — |
| 13 | Injector 4 port (#40) | — | W44 | — | 0.5 | EMUPRO16-A-8 | — | — | — |
| 14 | Injector 1 direct (#1) | — | W39 | — | 0.5 | EMUPRO16-A-3 | — | — | — |
| 16 | OCV intake bank 2 (OC2) | — | W61 | — | 0.5 | EMUPRO16-D-13 | — | — | — |
| 17 | OCV intake bank 1 (OC1) | — | W59 | — | 0.5 | EMUPRO16-C-2 | — | — | — |
| 18 | Throttle position (VTA1) | — | W74 | — | 0.5 | EMUPRO16-C-33 | — | — | — |
| 19 | Sensor 5V supply (VC) | — | W29 | — | 0.5 | SP-5V1-1 | — | — | — |
| 2 | Throttle actuator motor + (M+) | — | W48 | — | 0.5 | EMUPRO16-C-6 | — | — | — |
| 20 | Oil temperature (OT) | — | W78 | — | 0.5 | EMUPRO16-D-21 | — | — | — |
| 21 | Ignition coil 1 (IGT1) | — | W34 | — | 0.5 | EMUPRO16-A-30 | — | — | — |
| 22 | Injector 2 port (#20) | — | W40 | — | 0.5 | EMUPRO16-A-4 | — | — | — |
| 23 | Injector 4 direct (#4) | — | W45 | — | 0.5 | EMUPRO16-A-9 | — | — | — |
| 24 | Injector 3 direct (#3) | — | W42 | — | 0.5 | EMUPRO16-A-6 | — | — | — |
| 25 | Injector 2 direct (#2) | — | W41 | — | 0.5 | EMUPRO16-A-5 | — | — | — |
| 28 | Throttle position 2 (VTA2) | — | W72 | — | 0.5 | EMUPRO16-C-32 | — | — | — |
| 29 | Sensor ground (E1) | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Power ground (E02) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Engine coolant temperature (THW) | — | W76 | — | 0.5 | EMUPRO16-C-34 | — | — | — |
| 31 | Ignition coil 3 (IGT3) | — | W36 | — | 0.5 | EMUPRO16-A-28 | — | — | — |
| 32 | Injector 3 port (#30) | — | W43 | — | 0.5 | EMUPRO16-A-7 | — | — | — |
| 4 | Power ground (E01) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | OCV exhaust bank 2 (OE2) | — | W62 | — | 0.5 | EMUPRO16-D-19 | — | — | — |
| 6 | Heated oxygen sensor heater (HT1B) | — | W58 | — | 0.5 | EMUPRO16-C-1 | — | — | — |
| 7 | OCV exhaust bank 1 (OE1) | — | W60 | — | 0.5 | EMUPRO16-C-3 | — | — | — |
| 8 | Ignition coil 4 (IGT4) | — | W37 | — | 0.5 | EMUPRO16-A-27 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W17 | — | 0.5 | OEM-A33-29 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-A34-27 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-A35-29 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-A35-30 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-A36-29 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | EMUPRO16-A-20 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | EMUPRO16-B-9 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | EMUPRO16-C-29 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | EMUPRO16-D-17 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A33-1 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A34-6 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | EMUPRO16-B-14 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | EMUPRO16-B-8 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W26 | — | 0.5 | OEM-A34-34 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | OEM-A35-21 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | OEM-A35-22 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | OEM-A36-19 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | EMUPRO16-A-12 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-A33-4 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A34-1 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A34-2 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-A34-3 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-A36-3 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-A36-4 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | EMUPRO16-A-11 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | EMUPRO16-A-17 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | EMUPRO16-A-19 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | EMUPRO16-B-19 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | EMUPRO16-C-30 | — | — | — |
| 1 | — | — | W16 | — | 0.85 | EMUPRO16-D-18 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A33-1 | ECU power (+B2, main relay) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-A33-12 | Intake air temperature (THA, in MAF) | temp_in | EMUPRO16-C-12 | Analog 5 | analog_in | single_source | |
| OEM-A33-14 | Starter signal (STSW2) | digital_in | EMUPRO16-A-13 | Digital 2 | digital_in | single_source | |
| OEM-A33-15 | Clutch switch (CLSW) | digital_in | EMUPRO16-A-22 | Digital 3 | digital_in | single_source | |
| OEM-A33-16 | Neutral switch (NSW) | digital_in | EMUPRO16-A-14 | Digital 4 | digital_in | single_source | |
| OEM-A33-17 | Starter signal (STSW2) | digital_in | EMUPRO16-A-24 | Digital 5 (turbo) | digital_in | single_source | |
| OEM-A33-18 | CAN low (CANL) | can_l | EMUPRO16-A-32 | CAN 1 low (PC comm) | can_l | single_source | |
| OEM-A33-19 | CAN high (CANH) | can_h | EMUPRO16-A-31 | CAN 1 high (PC comm) | can_h | single_source | |
| OEM-A33-2 | Battery constant (BATT, memory) | power_in | — | — | — | single_source | |
| OEM-A33-20 | Blower relay (HB) | low_side_out | EMUPRO16-B-4 | Auxiliary 4 (WBO heater) | low_side_out | single_source | |
| OEM-A33-22 | Mass air flow (VG) | analog_in | EMUPRO16-C-31 | Precision analog 1 | analog_in | single_source | |
| OEM-A33-27 | Ignition switch sense (IGSW, IG2 relay) | digital_in | EMUPRO16-B-15 | +12V switched | digital_in | single_source | |
| OEM-A33-28 | Shield ground (SLE2) | shield | — | — | — | single_source | |
| OEM-A33-29 | MAF sensor ground (E2G) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-A33-3 | Stop light switch (ST1-) | digital_in | EMUPRO16-A-16 | Digital 6 (turbo) | digital_in | single_source | |
| OEM-A33-4 | Power ground (EC) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A33-7 | Stop light switch (STP) | digital_in | EMUPRO16-A-23 | Digital 7 | digital_in | single_source | |
| OEM-A33-8 | A/C pressure sensor (ACP) | analog_in | EMUPRO16-C-20 | Analog 6 | analog_in | single_source | |
| OEM-A34-1 | Power ground (E03) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A34-11 | DI injector confirmation (IJF1) | analog_in | EMUPRO16-D-15 | Precision analog 6 | analog_in | single_source | |
| OEM-A34-13 | High-pressure fuel pump spill valve (FPF) | low_side_out | EMUPRO16-D-26 | Auxiliary 15 | low_side_out | single_source | |
| OEM-A34-14 | VVT cam sensor exhaust bank 1 (EV1+) | trigger_in | — | — | — | single_source | |
| OEM-A34-15 | VVT cam sensor intake bank 2 (VV2+) | trigger_in | — | — | — | single_source | |
| OEM-A34-16 | Crank position (NE+) | trigger_in | EMUPRO16-A-21 | Digital 1 (crank) | trigger_in | single_source | |
| OEM-A34-17 | Knock sensor 2 (KNK2) | knock_in | EMUPRO16-B-17 | Knock sensor 2 | knock_in | single_source | |
| OEM-A34-18 | A/F ratio sensor (A1A-) | — | — | — | — | single_source | |
| OEM-A34-19 | A/F ratio sensor (A1A+) | — | — | — | — | single_source | |
| OEM-A34-2 | Power ground (E04) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A34-20 | Manifold absolute pressure (PIM) | analog_in | EMUPRO16-C-10 | Analog 1 (MAP) | analog_in | single_source | |
| OEM-A34-21 | Heated oxygen sensor (OX1B, rear) | lambda_nb_in | EMUPRO16-C-19 | Analog 4 | analog_in | single_source | |
| OEM-A34-25 | VVT cam sensor exhaust bank 2 (EV2+) | trigger_in | — | — | — | single_source | |
| OEM-A34-26 | VVT cam sensor intake bank 1 (VV1+) | trigger_in | — | — | — | single_source | |
| OEM-A34-27 | Crank position return (NE-) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-A34-28 | Knock sensor 1 (KNK1) | knock_in | EMUPRO16-B-16 | Knock sensor 1 | knock_in | single_source | |
| OEM-A34-29 | Shield ground (EKNK) | shield | — | — | — | single_source | |
| OEM-A34-3 | Power ground (E05) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A34-30 | Shield ground (SLE1) | shield | — | — | — | single_source | |
| OEM-A34-31 | DI injector confirmation (IJF2) | analog_in | EMUPRO16-C-4 | Analog 7 | analog_in | single_source | |
| OEM-A34-32 | High-pressure fuel pump spill valve (FPD) | low_side_out | EMUPRO16-D-25 | Auxiliary 16 | low_side_out | single_source | |
| OEM-A34-34 | OCV power source (VCV, 5V) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-A34-35 | Shield ground (SLE3) | shield | — | — | — | single_source | |
| OEM-A34-5 | A/F ratio sensor heater (HA1A) | low_side_out | EMUPRO16-A-25 | Auxiliary 9 | low_side_out | single_source | |
| OEM-A34-6 | ECU power (+B, main relay) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-A34-9 | Fuel pressure sensor (PR) | analog_in | EMUPRO16-D-22 | Precision analog 7 | analog_in | single_source | |
| OEM-A35-1 | Canister vent valve (VPMP) | low_side_out | EMUPRO16-D-8 | Injector 9 | injector_out | single_source | |
| OEM-A35-10 | Fuel pump control monitor (DI) | analog_in | EMUPRO16-C-13 | Analog 8 | analog_in | single_source | |
| OEM-A35-11 | Cooling fan relay 3 (FAN1) | low_side_out | EMUPRO16-B-3 | Auxiliary 3 (WBO heater) | low_side_out | single_source | |
| OEM-A35-12 | Cooling fan relay 2 (FAN2) | low_side_out | EMUPRO16-B-2 | Auxiliary 2 (WBO heater) | low_side_out | single_source | |
| OEM-A35-13 | EFI main relay 1 (SSHUT) | low_side_out | EMUPRO16-B-1 | Auxiliary 1 (WBO heater) | low_side_out | single_source | |
| OEM-A35-15 | Tachometer output (TACH) | tacho_out | — | — | — | single_source | |
| OEM-A35-17 | ETCS relay (MCR) | low_side_out | EMUPRO16-B-5 | Auxiliary 5 | low_side_out | single_source | |
| OEM-A35-19 | Fuel pump control (FPC) | low_side_out | EMUPRO16-D-1 | Injector 10 | injector_out | single_source | |
| OEM-A35-20 | Canister pressure sensor (PPMP) | analog_in | EMUPRO16-D-16 | Precision analog 8 | analog_in | single_source | |
| OEM-A35-21 | Accelerator pedal 5V supply (VCPA) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-A35-22 | Accelerator pedal 5V supply (VCP2) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-A35-23 | Accelerator pedal position (VPA) | analog_in | EMUPRO16-C-11 | Analog 3 | analog_in | single_source | |
| OEM-A35-26 | Starter signal (STA) | digital_in | EMUPRO16-A-15 | Digital 8 | digital_in | single_source | |
| OEM-A35-29 | Accelerator pedal ground (EPA) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-A35-30 | Accelerator pedal ground (EPA2) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-A35-31 | Accelerator pedal position 2 (VPA2) | analog_in | EMUPRO16-C-18 | Analog 2 | analog_in | single_source | |
| OEM-A35-35 | A/C clutch relay (AC) | low_side_out | EMUPRO16-B-6 | Auxiliary 6 | low_side_out | single_source | |
| OEM-A35-5 | Injector relay (IREL) | low_side_out | EMUPRO16-B-7 | Auxiliary 7 | low_side_out | single_source | |
| OEM-A35-7 | ETCS relay (+BM) | low_side_out | EMUPRO16-B-13 | Auxiliary 8 | low_side_out | single_source | |
| OEM-A35-8 | Leak detection pump (MPMP) | low_side_out | EMUPRO16-D-2 | Injector 11 | injector_out | single_source | |
| OEM-A36-1 | Throttle actuator motor - (M-) | hbridge_out | EMUPRO16-C-25 | H-bridge 1B | hbridge_out | single_source | |
| OEM-A36-10 | Ignition coil 2 (IGT2) | ignition_out | EMUPRO16-A-29 | Ignition 2 | ignition_out | single_source | |
| OEM-A36-11 | Purge valve (PRG) | low_side_out | EMUPRO16-D-3 | Injector 12 | injector_out | single_source | |
| OEM-A36-12 | Injector 1 port (#10) | injector_out | EMUPRO16-A-2 | Injector 1 | injector_out | single_source | |
| OEM-A36-13 | Injector 4 port (#40) | injector_out | EMUPRO16-A-8 | Injector 7 | injector_out | single_source | |
| OEM-A36-14 | Injector 1 direct (#1) | injector_out | EMUPRO16-A-3 | Injector 2 | injector_out | single_source | |
| OEM-A36-16 | OCV intake bank 2 (OC2) | low_side_out | EMUPRO16-D-13 | Auxiliary 13 | low_side_out | single_source | |
| OEM-A36-17 | OCV intake bank 1 (OC1) | low_side_out | EMUPRO16-C-2 | Auxiliary 11 | low_side_out | single_source | |
| OEM-A36-18 | Throttle position (VTA1) | analog_in | EMUPRO16-C-33 | Precision analog 3 | analog_in | single_source | |
| OEM-A36-19 | Sensor 5V supply (VC) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-A36-2 | Throttle actuator motor + (M+) | hbridge_out | EMUPRO16-C-6 | H-bridge 1A | hbridge_out | single_source | |
| OEM-A36-20 | Oil temperature (OT) | temp_in | EMUPRO16-D-21 | Precision analog 5 | analog_in | single_source | |
| OEM-A36-21 | Ignition coil 1 (IGT1) | ignition_out | EMUPRO16-A-30 | Ignition 1 | ignition_out | single_source | |
| OEM-A36-22 | Injector 2 port (#20) | injector_out | EMUPRO16-A-4 | Injector 3 | injector_out | single_source | |
| OEM-A36-23 | Injector 4 direct (#4) | injector_out | EMUPRO16-A-9 | Injector 8 | injector_out | single_source | |
| OEM-A36-24 | Injector 3 direct (#3) | injector_out | EMUPRO16-A-6 | Injector 5 | injector_out | single_source | |
| OEM-A36-25 | Injector 2 direct (#2) | injector_out | EMUPRO16-A-5 | Injector 4 | injector_out | single_source | |
| OEM-A36-28 | Throttle position 2 (VTA2) | analog_in | EMUPRO16-C-32 | Precision analog 2 | analog_in | single_source | |
| OEM-A36-29 | Sensor ground (E1) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-A36-3 | Power ground (E02) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A36-30 | Engine coolant temperature (THW) | temp_in | EMUPRO16-C-34 | Precision analog 4 | analog_in | single_source | |
| OEM-A36-31 | Ignition coil 3 (IGT3) | ignition_out | EMUPRO16-A-28 | Ignition 3 | ignition_out | single_source | |
| OEM-A36-32 | Injector 3 port (#30) | injector_out | EMUPRO16-A-7 | Injector 6 | injector_out | single_source | |
| OEM-A36-4 | Power ground (E01) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A36-5 | OCV exhaust bank 2 (OE2) | low_side_out | EMUPRO16-D-19 | Auxiliary 14 | low_side_out | single_source | |
| OEM-A36-6 | Heated oxygen sensor heater (HT1B) | low_side_out | EMUPRO16-C-1 | Auxiliary 10 | low_side_out | single_source | |
| OEM-A36-7 | OCV exhaust bank 1 (OE1) | low_side_out | EMUPRO16-C-3 | Auxiliary 12 | low_side_out | single_source | |
| OEM-A36-8 | Ignition coil 4 (IGT4) | ignition_out | EMUPRO16-A-27 | Ignition 4 | ignition_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | no route | ECU power (+B2, main relay) | — | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | no route | ECU power (+B, main relay) | — | |
| W3 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | no route | +12V supply | — | |
| W4 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | no route | +12V supply | — | |
| W5 | OEM-A33-4 | SP-GND-1 | 0.85 | no route | Power ground (EC) | — | |
| W6 | OEM-A34-1 | SP-GND-1 | 0.85 | no route | Power ground (E03) | — | |
| W7 | OEM-A34-2 | SP-GND-1 | 0.85 | no route | Power ground (E04) | — | |
| W8 | OEM-A34-3 | SP-GND-1 | 0.85 | no route | Power ground (E05) | — | |
| W9 | OEM-A36-3 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W10 | OEM-A36-4 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W11 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | no route | Power GND | — | |
| W12 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | no route | Power GND | — | |
| W13 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | no route | Power GND | — | |
| W14 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | no route | Power GND | — | |
| W15 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | no route | Power GND | — | |
| W16 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | no route | Power GND | — | |
| W17 | OEM-A33-29 | SP-0V-1 | 0.5 | no route | MAF sensor ground (E2G) | — | |
| W18 | OEM-A34-27 | SP-0V-1 | 0.5 | no route | Crank position return (NE-) | — | |
| W19 | OEM-A35-29 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA) | — | |
| W20 | OEM-A35-30 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA2) | — | |
| W21 | OEM-A36-29 | SP-0V-1 | 0.5 | no route | Sensor ground (E1) | — | |
| W22 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | no route | Digital GND | — | |
| W23 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | no route | Digital GND (flash drive) | — | |
| W24 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | no route | Analog GND | — | |
| W25 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | no route | Analog GND | — | |
| W26 | OEM-A34-34 | SP-5V1-1 | 0.5 | no route | OCV power source (VCV, 5V) | — | |
| W27 | OEM-A35-21 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCPA) | — | |
| W28 | OEM-A35-22 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCP2) | — | |
| W29 | OEM-A36-19 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VC) | — | |
| W30 | SP-5V1-1 | EMUPRO16-A-12 | 0.5 | no route | +5V source A | — | |
| W31 | OEM-A34-16 | EMUPRO16-A-21 | 0.5 | no route | Crank position (NE+) | — | |
| W32 | OEM-A34-28 | EMUPRO16-B-16 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W33 | OEM-A34-17 | EMUPRO16-B-17 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W34 | OEM-A36-21 | EMUPRO16-A-30 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W35 | OEM-A36-10 | EMUPRO16-A-29 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W36 | OEM-A36-31 | EMUPRO16-A-28 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W37 | OEM-A36-8 | EMUPRO16-A-27 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W38 | OEM-A36-12 | EMUPRO16-A-2 | 0.5 | no route | Injector 1 port (#10) | — | |
| W39 | OEM-A36-14 | EMUPRO16-A-3 | 0.5 | no route | Injector 1 direct (#1) | — | |
| W40 | OEM-A36-22 | EMUPRO16-A-4 | 0.5 | no route | Injector 2 port (#20) | — | |
| W41 | OEM-A36-25 | EMUPRO16-A-5 | 0.5 | no route | Injector 2 direct (#2) | — | |
| W42 | OEM-A36-24 | EMUPRO16-A-6 | 0.5 | no route | Injector 3 direct (#3) | — | |
| W43 | OEM-A36-32 | EMUPRO16-A-7 | 0.5 | no route | Injector 3 port (#30) | — | |
| W44 | OEM-A36-13 | EMUPRO16-A-8 | 0.5 | no route | Injector 4 port (#40) | — | |
| W45 | OEM-A36-23 | EMUPRO16-A-9 | 0.5 | no route | Injector 4 direct (#4) | — | |
| W46 | OEM-A33-27 | EMUPRO16-B-15 | 0.5 | no route | Ignition switch sense (IGSW, IG2 relay) | — | |
| W47 | OEM-A36-1 | EMUPRO16-C-25 | 0.5 | no route | Throttle actuator motor - (M-) | — | |
| W48 | OEM-A36-2 | EMUPRO16-C-6 | 0.5 | no route | Throttle actuator motor + (M+) | — | |
| W49 | OEM-A35-13 | EMUPRO16-B-1 | 0.5 | no route | EFI main relay 1 (SSHUT) | — | |
| W50 | OEM-A35-12 | EMUPRO16-B-2 | 0.5 | no route | Cooling fan relay 2 (FAN2) | — | |
| W51 | OEM-A35-11 | EMUPRO16-B-3 | 0.5 | no route | Cooling fan relay 3 (FAN1) | — | |
| W52 | OEM-A33-20 | EMUPRO16-B-4 | 0.5 | no route | Blower relay (HB) | — | |
| W53 | OEM-A35-17 | EMUPRO16-B-5 | 0.5 | no route | ETCS relay (MCR) | — | |
| W54 | OEM-A35-35 | EMUPRO16-B-6 | 0.5 | no route | A/C clutch relay (AC) | — | |
| W55 | OEM-A35-5 | EMUPRO16-B-7 | 0.5 | no route | Injector relay (IREL) | — | |
| W56 | OEM-A35-7 | EMUPRO16-B-13 | 0.5 | no route | ETCS relay (+BM) | — | |
| W57 | OEM-A34-5 | EMUPRO16-A-25 | 0.5 | no route | A/F ratio sensor heater (HA1A) | — | |
| W58 | OEM-A36-6 | EMUPRO16-C-1 | 0.5 | no route | Heated oxygen sensor heater (HT1B) | — | |
| W59 | OEM-A36-17 | EMUPRO16-C-2 | 0.5 | no route | OCV intake bank 1 (OC1) | — | |
| W60 | OEM-A36-7 | EMUPRO16-C-3 | 0.5 | no route | OCV exhaust bank 1 (OE1) | — | |
| W61 | OEM-A36-16 | EMUPRO16-D-13 | 0.5 | no route | OCV intake bank 2 (OC2) | — | |
| W62 | OEM-A36-5 | EMUPRO16-D-19 | 0.5 | no route | OCV exhaust bank 2 (OE2) | — | |
| W63 | OEM-A34-13 | EMUPRO16-D-26 | 0.5 | no route | High-pressure fuel pump spill valve (FPF) | — | |
| W64 | OEM-A34-32 | EMUPRO16-D-25 | 0.5 | no route | High-pressure fuel pump spill valve (FPD) | — | |
| W65 | OEM-A35-1 | EMUPRO16-D-8 | 0.5 | no route | Canister vent valve (VPMP) | — | |
| W66 | OEM-A35-19 | EMUPRO16-D-1 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W67 | OEM-A35-8 | EMUPRO16-D-2 | 0.5 | no route | Leak detection pump (MPMP) | — | |
| W68 | OEM-A36-11 | EMUPRO16-D-3 | 0.5 | no route | Purge valve (PRG) | — | |
| W69 | OEM-A33-22 | EMUPRO16-C-31 | 0.5 | no route | Mass air flow (VG) | — | |
| W70 | OEM-A34-20 | EMUPRO16-C-10 | 0.5 | no route | Manifold absolute pressure (PIM) | — | |
| W71 | OEM-A35-31 | EMUPRO16-C-18 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W72 | OEM-A36-28 | EMUPRO16-C-32 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W73 | OEM-A35-23 | EMUPRO16-C-11 | 0.5 | no route | Accelerator pedal position (VPA) | — | |
| W74 | OEM-A36-18 | EMUPRO16-C-33 | 0.5 | no route | Throttle position (VTA1) | — | |
| W75 | OEM-A34-21 | EMUPRO16-C-19 | 0.5 | no route | Heated oxygen sensor (OX1B, rear) | — | |
| W76 | OEM-A36-30 | EMUPRO16-C-34 | 0.5 | no route | Engine coolant temperature (THW) | — | |
| W77 | OEM-A33-12 | EMUPRO16-C-12 | 0.5 | no route | Intake air temperature (THA, in MAF) | — | |
| W78 | OEM-A36-20 | EMUPRO16-D-21 | 0.5 | no route | Oil temperature (OT) | — | |
| W79 | OEM-A33-8 | EMUPRO16-C-20 | 0.5 | no route | A/C pressure sensor (ACP) | — | |
| W80 | OEM-A34-11 | EMUPRO16-D-15 | 0.5 | no route | DI injector confirmation (IJF1) | — | |
| W81 | OEM-A34-31 | EMUPRO16-C-4 | 0.5 | no route | DI injector confirmation (IJF2) | — | |
| W82 | OEM-A34-9 | EMUPRO16-D-22 | 0.5 | no route | Fuel pressure sensor (PR) | — | |
| W83 | OEM-A35-10 | EMUPRO16-C-13 | 0.5 | no route | Fuel pump control monitor (DI) | — | |
| W84 | OEM-A35-20 | EMUPRO16-D-16 | 0.5 | no route | Canister pressure sensor (PPMP) | — | |
| W85 | OEM-A33-14 | EMUPRO16-A-13 | 0.5 | no route | Starter signal (STSW2) | — | |
| W86 | OEM-A33-15 | EMUPRO16-A-22 | 0.5 | no route | Clutch switch (CLSW) | — | |
| W87 | OEM-A33-16 | EMUPRO16-A-14 | 0.5 | no route | Neutral switch (NSW) | — | |
| W88 | OEM-A33-17 | EMUPRO16-A-24 | 0.5 | no route | Starter signal (STSW2) | — | |
| W89 | OEM-A33-3 | EMUPRO16-A-16 | 0.5 | no route | Stop light switch (ST1-) | — | |
| W90 | OEM-A33-7 | EMUPRO16-A-23 | 0.5 | no route | Stop light switch (STP) | — | |
| W91 | OEM-A35-26 | EMUPRO16-A-15 | 0.5 | no route | Starter signal (STA) | — | |
| W92 | OEM-A33-19 | EMUPRO16-A-31 | 0.5 | no route | CAN high (CANH) | — | |
| W93 | OEM-A33-18 | EMUPRO16-A-32 | 0.5 | no route | CAN low (CANL) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 1473416-1 | TE | Superseal 1.0 26-way plug, Key 3 | 1.000 | ea |
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 76.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (11)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 1 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| warn | DBW_MOTOR_CURRENT | EMUPRO16-C-25 | Cannot confirm EMU PRO 16 can drive the throttle motor: EMUPRO16-C-25 "H-bridge 1B" is rated 7.0 A, but the motor current at OEM-A36-1 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | EMUPRO16-C-6 | Cannot confirm EMU PRO 16 can drive the throttle motor: EMUPRO16-C-6 "H-bridge 1A" is rated 7.0 A, but the motor current at OEM-A36-2 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| info | NET_FAMILY | OEM-A33-12 ↔ EMUPRO16-C-12 | OEM-A33-12 "Intake air temperature (THA, in MAF)" [temp_in] is wired to EMUPRO16-C-12 "Analog 5" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-A35-1 ↔ EMUPRO16-D-8 | OEM-A35-1 "Canister vent valve (VPMP)" [low_side_out] is wired to EMUPRO16-D-8 "Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A35-19 ↔ EMUPRO16-D-1 | OEM-A35-19 "Fuel pump control (FPC)" [low_side_out] is wired to EMUPRO16-D-1 "Injector 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A35-8 ↔ EMUPRO16-D-2 | OEM-A35-8 "Leak detection pump (MPMP)" [low_side_out] is wired to EMUPRO16-D-2 "Injector 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A36-11 ↔ EMUPRO16-D-3 | OEM-A36-11 "Purge valve (PRG)" [low_side_out] is wired to EMUPRO16-D-3 "Injector 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-A36-20 ↔ EMUPRO16-D-21 | OEM-A36-20 "Oil temperature (OT)" [temp_in] is wired to EMUPRO16-D-21 "Precision analog 5" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-A36-30 ↔ EMUPRO16-C-34 | OEM-A36-30 "Engine coolant temperature (THW)" [temp_in] is wired to EMUPRO16-C-34 "Precision analog 4" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 11 optional OEM pins are not mapped: OEM-A33-28 Shield ground (SLE2); OEM-A34-14 VVT cam sensor exhaust bank 1 (EV1+); OEM-A34-15 VVT cam sensor intake bank 2 (VV2+); OEM-A34-18 A/F ratio sensor (A1A-); OEM-A34-19 A/F ratio sensor (A1A+); OEM-A34-25 VVT cam sensor exhaust bank 2 (EV2+); OEM-A34-26 VVT cam sensor intake bank 1 (VV1+); OEM-A34-29 Shield ground (EKNK); OEM-A34-30 Shield ground (SLE1); OEM-A34-35 Shield ground (SLE3); OEM-A35-15 Tachometer output (TACH) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-A33-2 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-09. Review every wire against both manuals before building. Not wired: - OEM-A33 2: Battery constant (BATT, memory): ECUMASTER EMU PRO 16 has no battery-constant input; not needed - OEM-A34 14: VVT cam sensor exhaust bank 1 (EV1+): no free cam_hall/cam_vr/frequency_in input on ECUMASTER EMU PRO 16 - OEM-A34 26: VVT cam sensor intake bank 1 (VV1+): no free cam_hall/cam_vr/frequency_in input on ECUMASTER EMU PRO 16 - OEM-A34 25: VVT cam sensor exhaust bank 2 (EV2+): no free cam_hall/cam_vr/frequency_in input on ECUMASTER EMU PRO 16 - OEM-A34 15: VVT cam sensor intake bank 2 (VV2+): no free cam_hall/cam_vr/frequency_in input on ECUMASTER EMU PRO 16 - OEM-A33 28: Shield ground (SLE2): no shield pin on ECUMASTER EMU PRO 16 - OEM-A34 29: Shield ground (EKNK): no shield pin on ECUMASTER EMU PRO 16 - OEM-A34 30: Shield ground (SLE1): no shield pin on ECUMASTER EMU PRO 16 - OEM-A34 35: Shield ground (SLE3): no shield pin on ECUMASTER EMU PRO 16 - OEM-A35 15: Tachometer output (TACH): no free tacho/frequency_out/low_side/ls_hs on ECUMASTER EMU PRO 16 - OEM-A34 18: A/F ratio sensor (A1A-): not classified in the library; wire by hand - OEM-A34 19: A/F ratio sensor (A1A+): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER EMU PRO 16 — pinout (Connectors A/B/C/D) | https://www.ecumaster.com/files/EMU_PRO/EMU_PRO_16_Pinout_v1.0.pdf | archive | 2026-10-05 | 72799bed63fb |
| 4 | vendor_doc | Scion FR-S / Toyota 86 Repair Manual (2013) — FA20 ECM terminal pinout (SFI system) | https://gt86.me/images/0/09/2013_Scion_FR-S_Repair_Manual.pdf | — | — | — |