Toyota 86 (ZN6, FA20) → rusEFI Proteus (auto)
Toyota 86 (ZN6, FA20) — rusEFI — Proteus
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-09
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 88 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A33-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A34-1 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A34-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A34-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A36-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A36-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A33-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A34-27 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A35-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-A35-30 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-A36-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-A34-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A35-21 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-A35-22 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-A36-19 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | SP-5V1-1 | PROTEUS-White35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-A34-16 | PROTEUS-Black23-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A34-14 | PROTEUS-Black23-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A34-26 | PROTEUS-Black23-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A34-25 | PROTEUS-Black23-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A34-28 | PROTEUS-White35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A34-17 | PROTEUS-White35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A36-21 | PROTEUS-Black35-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A36-10 | PROTEUS-Black35-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A36-31 | PROTEUS-Black35-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A36-8 | PROTEUS-Black35-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A36-12 | PROTEUS-Black35-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A36-14 | PROTEUS-Black35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A36-22 | PROTEUS-Black35-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A36-25 | PROTEUS-Black35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A36-24 | PROTEUS-Black35-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-A36-32 | PROTEUS-Black35-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-A36-13 | PROTEUS-Black35-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-A36-23 | PROTEUS-Black35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A33-27 | PROTEUS-Black23-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-A36-1 | PROTEUS-Black23-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-A36-2 | PROTEUS-Black23-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A35-13 | PROTEUS-Black35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A35-12 | PROTEUS-Black35-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-A35-11 | PROTEUS-Black35-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-A33-20 | PROTEUS-Black35-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-A35-17 | PROTEUS-Black35-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-A35-35 | PROTEUS-Black35-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-A35-5 | PROTEUS-Black35-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-A35-7 | PROTEUS-Black35-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-A34-5 | PROTEUS-Black23-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-A36-6 | PROTEUS-Black23-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-A33-22 | PROTEUS-White35-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-A34-20 | PROTEUS-White35-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-A35-31 | PROTEUS-White35-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-A36-28 | PROTEUS-White35-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-A35-23 | PROTEUS-White35-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-A36-18 | PROTEUS-White35-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-A34-21 | PROTEUS-White35-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-A36-30 | PROTEUS-White35-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-A33-12 | PROTEUS-White35-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-A36-20 | PROTEUS-White35-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-A33-8 | PROTEUS-White35-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-A34-11 | PROTEUS-White35-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-A34-31 | PROTEUS-White35-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W82 | OEM-A34-9 | PROTEUS-White35-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W83 | OEM-A33-14 | PROTEUS-Black23-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W84 | OEM-A33-15 | PROTEUS-Black23-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W85 | OEM-A33-16 | PROTEUS-Black23-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W86 | OEM-A33-17 | PROTEUS-Black23-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W87 | OEM-A33-19 | PROTEUS-Black23-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W88 | OEM-A33-18 | PROTEUS-Black23-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | PROTEUS-Black23-23 | PROTEUS-Black23-12 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | PROTEUS-Black23-23 | PROTEUS-Black23-14 | open (OL) | +12 V supply must not touch power ground | |
| 3 | PROTEUS-Black23-12 | PROTEUS-White35-10 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 4 | PROTEUS-Black23-14 | PROTEUS-White35-10 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | PROTEUS-Black23-23 | PROTEUS-White35-10 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-A33
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU power (+B2, main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 12 | Intake air temperature (THA, in MAF) | — | W77 | — | 0.5 | PROTEUS-White35-30 | — | — | — |
| 14 | Starter signal (STSW2) | — | W83 | — | 0.5 | PROTEUS-Black23-10 | — | — | — |
| 15 | Clutch switch (CLSW) | — | W84 | — | 0.5 | PROTEUS-Black23-3 | — | — | — |
| 16 | Neutral switch (NSW) | — | W85 | — | 0.5 | PROTEUS-Black23-9 | — | — | — |
| 17 | Starter signal (STSW2) | — | W86 | — | 0.5 | PROTEUS-Black23-11 | — | — | — |
| 18 | CAN low (CANL) | — | W88 | — | 0.5 | PROTEUS-Black23-16 | — | — | — |
| 19 | CAN high (CANH) | — | W87 | — | 0.5 | PROTEUS-Black23-17 | — | — | — |
| 2 | Battery constant (BATT, memory) | — | — | — | — | — | — | — | — |
| 20 | Blower relay (HB) | — | W62 | — | 0.5 | PROTEUS-Black35-10 | — | — | — |
| 22 | Mass air flow (VG) | — | W69 | — | 0.5 | PROTEUS-White35-13 | — | — | — |
| 27 | Ignition switch sense (IGSW, IG2 relay) | — | W56 | — | 0.5 | PROTEUS-Black23-18 | — | — | — |
| 28 | Shield ground (SLE2) | — | — | — | — | — | — | — | — |
| 29 | MAF sensor ground (E2G) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Stop light switch (ST1-) | — | — | — | — | — | — | — | — |
| 4 | Power ground (EC) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 8 | A/C pressure sensor (ACP) | — | W79 | — | 0.5 | PROTEUS-White35-27 | — | — | — |
OEM-A34
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power ground (E03) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | DI injector confirmation (IJF1) | — | W80 | — | 0.5 | PROTEUS-White35-17 | — | — | — |
| 13 | High-pressure fuel pump spill valve (FPF) | — | — | — | — | — | — | — | — |
| 14 | VVT cam sensor exhaust bank 1 (EV1+) | — | W38 | — | 0.5 | PROTEUS-Black23-1 | — | — | — |
| 15 | VVT cam sensor intake bank 2 (VV2+) | — | — | — | — | — | — | — | — |
| 16 | Crank position (NE+) | — | W36 | — | 0.5 | PROTEUS-Black23-5 | — | — | — |
| 17 | Knock sensor 2 (KNK2) | — | W43 | — | 0.5 | PROTEUS-White35-35 | — | — | — |
| 18 | A/F ratio sensor (A1A-) | — | — | — | — | — | — | — | — |
| 19 | A/F ratio sensor (A1A+) | — | — | — | — | — | — | — | — |
| 2 | Power ground (E04) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Manifold absolute pressure (PIM) | — | W70 | — | 0.5 | PROTEUS-White35-24 | — | — | — |
| 21 | Heated oxygen sensor (OX1B, rear) | — | W75 | — | 0.5 | PROTEUS-White35-16 | — | — | — |
| 25 | VVT cam sensor exhaust bank 2 (EV2+) | — | W41 | — | 0.5 | PROTEUS-Black23-2 | — | — | — |
| 26 | VVT cam sensor intake bank 1 (VV1+) | — | W39 | — | 0.5 | PROTEUS-Black23-4 | — | — | — |
| 27 | Crank position return (NE-) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 28 | Knock sensor 1 (KNK1) | — | W42 | — | 0.5 | PROTEUS-White35-34 | — | — | — |
| 29 | Shield ground (EKNK) | — | — | — | — | — | — | — | — |
| 3 | Power ground (E05) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Shield ground (SLE1) | — | — | — | — | — | — | — | — |
| 31 | DI injector confirmation (IJF2) | — | W81 | — | 0.5 | PROTEUS-White35-28 | — | — | — |
| 32 | High-pressure fuel pump spill valve (FPD) | — | — | — | — | — | — | — | — |
| 34 | OCV power source (VCV, 5V) | — | W31 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Shield ground (SLE3) | — | — | — | — | — | — | — | — |
| 5 | A/F ratio sensor heater (HA1A) | — | W67 | — | 0.5 | PROTEUS-Black23-15 | — | — | — |
| 6 | ECU power (+B, main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Fuel pressure sensor (PR) | — | W82 | — | 0.5 | PROTEUS-White35-18 | — | — | — |
OEM-A35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Canister vent valve (VPMP) | — | — | — | — | — | — | — | — |
| 10 | Fuel pump control monitor (DI) | — | — | — | — | — | — | — | — |
| 11 | Cooling fan relay 3 (FAN1) | — | W61 | — | 0.5 | PROTEUS-Black35-21 | — | — | — |
| 12 | Cooling fan relay 2 (FAN2) | — | W60 | — | 0.5 | PROTEUS-Black35-9 | — | — | — |
| 13 | EFI main relay 1 (SSHUT) | — | W59 | — | 0.5 | PROTEUS-Black35-20 | — | — | — |
| 15 | Tachometer output (TACH) | — | — | — | — | — | — | — | — |
| 17 | ETCS relay (MCR) | — | W63 | — | 0.5 | PROTEUS-Black35-11 | — | — | — |
| 19 | Fuel pump control (FPC) | — | — | — | — | — | — | — | — |
| 20 | Canister pressure sensor (PPMP) | — | — | — | — | — | — | — | — |
| 21 | Accelerator pedal 5V supply (VCPA) | — | W32 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Accelerator pedal 5V supply (VCP2) | — | W33 | — | 0.5 | SP-5V1-1 | — | — | — |
| 23 | Accelerator pedal position (VPA) | — | W73 | — | 0.5 | PROTEUS-White35-15 | — | — | — |
| 26 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 29 | Accelerator pedal ground (EPA) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Accelerator pedal ground (EPA2) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | Accelerator pedal position 2 (VPA2) | — | W71 | — | 0.5 | PROTEUS-White35-14 | — | — | — |
| 35 | A/C clutch relay (AC) | — | W64 | — | 0.5 | PROTEUS-Black35-12 | — | — | — |
| 5 | Injector relay (IREL) | — | W65 | — | 0.5 | PROTEUS-Black35-23 | — | — | — |
| 7 | ETCS relay (+BM) | — | W66 | — | 0.5 | PROTEUS-Black35-8 | — | — | — |
| 8 | Leak detection pump (MPMP) | — | — | — | — | — | — | — | — |
OEM-A36
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Throttle actuator motor - (M-) | — | W57 | — | 0.5 | PROTEUS-Black23-6 | — | — | — |
| 10 | Ignition coil 2 (IGT2) | — | W45 | — | 0.5 | PROTEUS-Black35-34 | — | — | — |
| 11 | Purge valve (PRG) | — | — | — | — | — | — | — | — |
| 12 | Injector 1 port (#10) | — | W48 | — | 0.5 | PROTEUS-Black35-3 | — | — | — |
| 13 | Injector 4 port (#40) | — | W54 | — | 0.5 | PROTEUS-Black35-7 | — | — | — |
| 14 | Injector 1 direct (#1) | — | W49 | — | 0.5 | PROTEUS-Black35-15 | — | — | — |
| 16 | OCV intake bank 2 (OC2) | — | — | — | — | — | — | — | — |
| 17 | OCV intake bank 1 (OC1) | — | — | — | — | — | — | — | — |
| 18 | Throttle position (VTA1) | — | W74 | — | 0.5 | PROTEUS-White35-26 | — | — | — |
| 19 | Sensor 5V supply (VC) | — | W34 | — | 0.5 | SP-5V1-1 | — | — | — |
| 2 | Throttle actuator motor + (M+) | — | W58 | — | 0.5 | PROTEUS-Black23-7 | — | — | — |
| 20 | Oil temperature (OT) | — | W78 | — | 0.5 | PROTEUS-White35-19 | — | — | — |
| 21 | Ignition coil 1 (IGT1) | — | W44 | — | 0.5 | PROTEUS-Black35-35 | — | — | — |
| 22 | Injector 2 port (#20) | — | W50 | — | 0.5 | PROTEUS-Black35-4 | — | — | — |
| 23 | Injector 4 direct (#4) | — | W55 | — | 0.5 | PROTEUS-Black35-19 | — | — | — |
| 24 | Injector 3 direct (#3) | — | W52 | — | 0.5 | PROTEUS-Black35-5 | — | — | — |
| 25 | Injector 2 direct (#2) | — | W51 | — | 0.5 | PROTEUS-Black35-16 | — | — | — |
| 28 | Throttle position 2 (VTA2) | — | W72 | — | 0.5 | PROTEUS-White35-25 | — | — | — |
| 29 | Sensor ground (E1) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Power ground (E02) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Engine coolant temperature (THW) | — | W76 | — | 0.5 | PROTEUS-White35-20 | — | — | — |
| 31 | Ignition coil 3 (IGT3) | — | W46 | — | 0.5 | PROTEUS-Black35-22 | — | — | — |
| 32 | Injector 3 port (#30) | — | W53 | — | 0.5 | PROTEUS-Black35-6 | — | — | — |
| 4 | Power ground (E01) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | OCV exhaust bank 2 (OE2) | — | — | — | — | — | — | — | — |
| 6 | Heated oxygen sensor heater (HT1B) | — | W68 | — | 0.5 | PROTEUS-Black23-8 | — | — | — |
| 7 | OCV exhaust bank 1 (OE1) | — | — | — | — | — | — | — | — |
| 8 | Ignition coil 4 (IGT4) | — | W47 | — | 0.5 | PROTEUS-Black35-33 | — | — | — |
PROTEUS-Black23
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital 2 | — | W38 | — | 0.5 | OEM-A34-14 | — | — | — |
| 10 | Digital 1 | — | W83 | — | 0.5 | OEM-A33-14 | — | — | — |
| 11 | Digital 6 | — | W86 | — | 0.5 | OEM-A33-17 | — | — | — |
| 12 | VR 2 negative | — | W40 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | VR 1 negative | — | W37 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Power ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | ETB 2 positive | — | W67 | — | 0.5 | OEM-A34-5 | — | — | — |
| 16 | CAN 1 Low | — | W88 | — | 0.5 | OEM-A33-18 | — | — | — |
| 17 | CAN 1 High | — | W87 | — | 0.5 | OEM-A33-19 | — | — | — |
| 18 | Ignition switch in | — | W56 | — | 0.5 | OEM-A33-27 | — | — | — |
| 19 | Power ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Digital 3 | — | W41 | — | 0.5 | OEM-A34-25 | — | — | — |
| 20 | Power ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | CAN 2 Low | — | — | — | — | — | — | — | — |
| 22 | CAN 2 High | — | — | — | — | — | — | — | — |
| 23 | Main relay feed | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Digital 4 | — | W84 | — | 0.5 | OEM-A33-15 | — | — | — |
| 4 | VR 2 positive | — | W39 | — | 0.5 | OEM-A34-26 | — | — | — |
| 5 | VR 1 positive | — | W36 | — | 0.5 | OEM-A34-16 | — | — | — |
| 6 | ETB 1 negative | — | W57 | — | 0.5 | OEM-A36-1 | — | — | — |
| 7 | ETB 1 positive | — | W58 | — | 0.5 | OEM-A36-2 | — | — | — |
| 8 | ETB 2 negative | — | W68 | — | 0.5 | OEM-A36-6 | — | — | — |
| 9 | Digital 5 | — | W85 | — | 0.5 | OEM-A33-16 | — | — | — |
PROTEUS-Black35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Highside 2 | — | — | — | — | — | — | — | — |
| 10 | Lowside 13 | — | W62 | — | 0.5 | OEM-A33-20 | — | — | — |
| 11 | Lowside 14 | — | W63 | — | 0.5 | OEM-A35-17 | — | — | — |
| 12 | Lowside 15 | — | W64 | — | 0.5 | OEM-A35-35 | — | — | — |
| 13 | Highside 3 | — | — | — | — | — | — | — | — |
| 14 | Highside 4 | — | — | — | — | — | — | — | — |
| 15 | Injector 2 | — | W49 | — | 0.5 | OEM-A36-14 | — | — | — |
| 16 | Injector 4 | — | W51 | — | 0.5 | OEM-A36-25 | — | — | — |
| 17 | Power ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Power ground | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Injector 8 | — | W55 | — | 0.5 | OEM-A36-23 | — | — | — |
| 2 | Highside 1 | — | — | — | — | — | — | — | — |
| 20 | Lowside 10 | — | W59 | — | 0.5 | OEM-A35-13 | — | — | — |
| 21 | Lowside 12 | — | W61 | — | 0.5 | OEM-A35-11 | — | — | — |
| 22 | Ignition 3 | — | W46 | — | 0.5 | OEM-A36-31 | — | — | — |
| 23 | Lowside 16 | — | W65 | — | 0.5 | OEM-A35-5 | — | — | — |
| 24 | Power ground | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| 25 | Ignition 12 | — | — | — | — | — | — | — | — |
| 26 | Ignition 11 | — | — | — | — | — | — | — | — |
| 27 | Ignition 10 | — | — | — | — | — | — | — | — |
| 28 | Ignition 9 | — | — | — | — | — | — | — | — |
| 29 | Ignition 8 | — | — | — | — | — | — | — | — |
| 3 | Injector 1 | — | W48 | — | 0.5 | OEM-A36-12 | — | — | — |
| 30 | Ignition 7 | — | — | — | — | — | — | — | — |
| 31 | Ignition 6 | — | — | — | — | — | — | — | — |
| 32 | Ignition 5 | — | — | — | — | — | — | — | — |
| 33 | Ignition 4 | — | W47 | — | 0.5 | OEM-A36-8 | — | — | — |
| 34 | Ignition 2 | — | W45 | — | 0.5 | OEM-A36-10 | — | — | — |
| 35 | Ignition 1 | — | W44 | — | 0.5 | OEM-A36-21 | — | — | — |
| 4 | Injector 3 | — | W50 | — | 0.5 | OEM-A36-22 | — | — | — |
| 5 | Injector 5 | — | W52 | — | 0.5 | OEM-A36-24 | — | — | — |
| 6 | Injector 6 | — | W53 | — | 0.5 | OEM-A36-32 | — | — | — |
| 7 | Injector 7 | — | W54 | — | 0.5 | OEM-A36-13 | — | — | — |
| 8 | Injector 9 | — | W66 | — | 0.5 | OEM-A35-7 | — | — | — |
| 9 | Lowside 11 | — | W60 | — | 0.5 | OEM-A35-12 | — | — | — |
PROTEUS-White35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | 5V supply #2 | — | W35 | — | 0.5 | SP-5V1-1 | — | — | — |
| 11 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 12 | 12V sensor supply | — | — | — | — | — | — | — | — |
| 13 | Analog Volt 1 | — | W69 | — | 0.5 | OEM-A33-22 | — | — | — |
| 14 | Analog Volt 3 | — | W71 | — | 0.5 | OEM-A35-31 | — | — | — |
| 15 | Analog Volt 5 | — | W73 | — | 0.5 | OEM-A35-23 | — | — | — |
| 16 | Analog Volt 7 | — | W75 | — | 0.5 | OEM-A34-21 | — | — | — |
| 17 | Analog Volt 9 | — | W80 | — | 0.5 | OEM-A34-11 | — | — | — |
| 18 | Analog Volt 11 | — | W82 | — | 0.5 | OEM-A34-9 | — | — | — |
| 19 | Thermistor 1 | — | W78 | — | 0.5 | OEM-A36-20 | — | — | — |
| 2 | Sensor ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | Coolant temp (CLT) | — | W76 | — | 0.5 | OEM-A36-30 | — | — | — |
| 21 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 22 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 23 | Sensor ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Analog Volt 2 | — | W70 | — | 0.5 | OEM-A34-20 | — | — | — |
| 25 | Analog Volt 4 | — | W72 | — | 0.5 | OEM-A36-28 | — | — | — |
| 26 | Analog Volt 6 | — | W74 | — | 0.5 | OEM-A36-18 | — | — | — |
| 27 | Analog Volt 8 | — | W79 | — | 0.5 | OEM-A33-8 | — | — | — |
| 28 | Analog Volt 10 | — | W81 | — | 0.5 | OEM-A34-31 | — | — | — |
| 29 | Sensor ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Sensor ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Intake air temp (IAT) | — | W77 | — | 0.5 | OEM-A33-12 | — | — | — |
| 31 | Thermistor 4 | — | — | — | — | — | — | — | — |
| 32 | 5V supply #1 | — | — | — | — | — | — | — | — |
| 33 | 5V supply #2 | — | — | — | — | — | — | — | — |
| 34 | Knock 1 | — | W42 | — | 0.5 | OEM-A34-28 | — | — | — |
| 35 | Knock 2 | — | W43 | — | 0.5 | OEM-A34-17 | — | — | — |
| 4 | Sensor ground | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Sensor ground | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Sensor ground | — | W29 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Sensor ground | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| 9 | 5V supply #1 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W16 | — | 0.5 | OEM-A33-29 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-A34-27 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-A35-29 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-A35-30 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-A36-29 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | PROTEUS-White35-1 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | PROTEUS-White35-2 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | PROTEUS-White35-23 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | PROTEUS-White35-29 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | PROTEUS-White35-3 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | PROTEUS-White35-4 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | PROTEUS-White35-5 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | PROTEUS-White35-6 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | PROTEUS-White35-7 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | PROTEUS-White35-8 | — | — | — |
| 1 | — | — | W37 | — | 0.5 | PROTEUS-Black23-13 | — | — | — |
| 1 | — | — | W40 | — | 0.5 | PROTEUS-Black23-12 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A33-1 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A34-6 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | PROTEUS-Black23-23 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W31 | — | 0.5 | OEM-A34-34 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | OEM-A35-21 | — | — | — |
| 1 | — | — | W33 | — | 0.5 | OEM-A35-22 | — | — | — |
| 1 | — | — | W34 | — | 0.5 | OEM-A36-19 | — | — | — |
| 1 | — | — | W35 | — | 0.5 | PROTEUS-White35-10 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-A33-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A34-1 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-A34-2 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A34-3 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-A36-3 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-A36-4 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | PROTEUS-Black23-14 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | PROTEUS-Black23-19 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | PROTEUS-Black23-20 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | PROTEUS-Black35-17 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | PROTEUS-Black35-18 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | PROTEUS-Black35-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A33-1 | ECU power (+B2, main relay) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-A33-12 | Intake air temperature (THA, in MAF) | temp_in | PROTEUS-White35-30 | Intake air temp (IAT) | temp_in | single_source | |
| OEM-A33-14 | Starter signal (STSW2) | digital_in | PROTEUS-Black23-10 | Digital 1 | digital_in | single_source | |
| OEM-A33-15 | Clutch switch (CLSW) | digital_in | PROTEUS-Black23-3 | Digital 4 | digital_in | single_source | |
| OEM-A33-16 | Neutral switch (NSW) | digital_in | PROTEUS-Black23-9 | Digital 5 | digital_in | single_source | |
| OEM-A33-17 | Starter signal (STSW2) | digital_in | PROTEUS-Black23-11 | Digital 6 | digital_in | single_source | |
| OEM-A33-18 | CAN low (CANL) | can_l | PROTEUS-Black23-16 | CAN 1 Low | can_l | single_source | |
| OEM-A33-19 | CAN high (CANH) | can_h | PROTEUS-Black23-17 | CAN 1 High | can_h | single_source | |
| OEM-A33-2 | Battery constant (BATT, memory) | power_in | — | — | — | single_source | |
| OEM-A33-20 | Blower relay (HB) | low_side_out | PROTEUS-Black35-10 | Lowside 13 | low_side_out | single_source | |
| OEM-A33-22 | Mass air flow (VG) | analog_in | PROTEUS-White35-13 | Analog Volt 1 | analog_in | single_source | |
| OEM-A33-27 | Ignition switch sense (IGSW, IG2 relay) | digital_in | PROTEUS-Black23-18 | Ignition switch in | digital_in | single_source | |
| OEM-A33-28 | Shield ground (SLE2) | shield | — | — | — | single_source | |
| OEM-A33-29 | MAF sensor ground (E2G) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-A33-3 | Stop light switch (ST1-) | digital_in | — | — | — | single_source | |
| OEM-A33-4 | Power ground (EC) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A33-7 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-A33-8 | A/C pressure sensor (ACP) | analog_in | PROTEUS-White35-27 | Analog Volt 8 | analog_in | single_source | |
| OEM-A34-1 | Power ground (E03) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A34-11 | DI injector confirmation (IJF1) | analog_in | PROTEUS-White35-17 | Analog Volt 9 | analog_in | single_source | |
| OEM-A34-13 | High-pressure fuel pump spill valve (FPF) | low_side_out | — | — | — | single_source | |
| OEM-A34-14 | VVT cam sensor exhaust bank 1 (EV1+) | trigger_in | PROTEUS-Black23-1 | Digital 2 | trigger_in | single_source | |
| OEM-A34-15 | VVT cam sensor intake bank 2 (VV2+) | trigger_in | — | — | — | single_source | |
| OEM-A34-16 | Crank position (NE+) | trigger_in | PROTEUS-Black23-5 | VR 1 positive | trigger_in | single_source | |
| OEM-A34-17 | Knock sensor 2 (KNK2) | knock_in | PROTEUS-White35-35 | Knock 2 | knock_in | single_source | |
| OEM-A34-18 | A/F ratio sensor (A1A-) | — | — | — | — | single_source | |
| OEM-A34-19 | A/F ratio sensor (A1A+) | — | — | — | — | single_source | |
| OEM-A34-2 | Power ground (E04) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A34-20 | Manifold absolute pressure (PIM) | analog_in | PROTEUS-White35-24 | Analog Volt 2 | analog_in | single_source | |
| OEM-A34-21 | Heated oxygen sensor (OX1B, rear) | lambda_nb_in | PROTEUS-White35-16 | Analog Volt 7 | analog_in | single_source | |
| OEM-A34-25 | VVT cam sensor exhaust bank 2 (EV2+) | trigger_in | PROTEUS-Black23-2 | Digital 3 | digital_in | single_source | |
| OEM-A34-26 | VVT cam sensor intake bank 1 (VV1+) | trigger_in | PROTEUS-Black23-4 | VR 2 positive | trigger_in | single_source | |
| OEM-A34-27 | Crank position return (NE-) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-A34-28 | Knock sensor 1 (KNK1) | knock_in | PROTEUS-White35-34 | Knock 1 | knock_in | single_source | |
| OEM-A34-29 | Shield ground (EKNK) | shield | — | — | — | single_source | |
| OEM-A34-3 | Power ground (E05) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A34-30 | Shield ground (SLE1) | shield | — | — | — | single_source | |
| OEM-A34-31 | DI injector confirmation (IJF2) | analog_in | PROTEUS-White35-28 | Analog Volt 10 | analog_in | single_source | |
| OEM-A34-32 | High-pressure fuel pump spill valve (FPD) | low_side_out | — | — | — | single_source | |
| OEM-A34-34 | OCV power source (VCV, 5V) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-A34-35 | Shield ground (SLE3) | shield | — | — | — | single_source | |
| OEM-A34-5 | A/F ratio sensor heater (HA1A) | low_side_out | PROTEUS-Black23-15 | ETB 2 positive | hbridge_out | single_source | |
| OEM-A34-6 | ECU power (+B, main relay) | power_in | PROTEUS-Black23-23 | Main relay feed | power_in | single_source | |
| OEM-A34-9 | Fuel pressure sensor (PR) | analog_in | PROTEUS-White35-18 | Analog Volt 11 | analog_in | single_source | |
| OEM-A35-1 | Canister vent valve (VPMP) | low_side_out | — | — | — | single_source | |
| OEM-A35-10 | Fuel pump control monitor (DI) | analog_in | — | — | — | single_source | |
| OEM-A35-11 | Cooling fan relay 3 (FAN1) | low_side_out | PROTEUS-Black35-21 | Lowside 12 | low_side_out | single_source | |
| OEM-A35-12 | Cooling fan relay 2 (FAN2) | low_side_out | PROTEUS-Black35-9 | Lowside 11 | low_side_out | single_source | |
| OEM-A35-13 | EFI main relay 1 (SSHUT) | low_side_out | PROTEUS-Black35-20 | Lowside 10 | low_side_out | single_source | |
| OEM-A35-15 | Tachometer output (TACH) | tacho_out | — | — | — | single_source | |
| OEM-A35-17 | ETCS relay (MCR) | low_side_out | PROTEUS-Black35-11 | Lowside 14 | low_side_out | single_source | |
| OEM-A35-19 | Fuel pump control (FPC) | low_side_out | — | — | — | single_source | |
| OEM-A35-20 | Canister pressure sensor (PPMP) | analog_in | — | — | — | single_source | |
| OEM-A35-21 | Accelerator pedal 5V supply (VCPA) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-A35-22 | Accelerator pedal 5V supply (VCP2) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-A35-23 | Accelerator pedal position (VPA) | analog_in | PROTEUS-White35-15 | Analog Volt 5 | analog_in | single_source | |
| OEM-A35-26 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-A35-29 | Accelerator pedal ground (EPA) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-A35-30 | Accelerator pedal ground (EPA2) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-A35-31 | Accelerator pedal position 2 (VPA2) | analog_in | PROTEUS-White35-14 | Analog Volt 3 | analog_in | single_source | |
| OEM-A35-35 | A/C clutch relay (AC) | low_side_out | PROTEUS-Black35-12 | Lowside 15 | low_side_out | single_source | |
| OEM-A35-5 | Injector relay (IREL) | low_side_out | PROTEUS-Black35-23 | Lowside 16 | low_side_out | single_source | |
| OEM-A35-7 | ETCS relay (+BM) | low_side_out | PROTEUS-Black35-8 | Injector 9 | injector_out | single_source | |
| OEM-A35-8 | Leak detection pump (MPMP) | low_side_out | — | — | — | single_source | |
| OEM-A36-1 | Throttle actuator motor - (M-) | hbridge_out | PROTEUS-Black23-6 | ETB 1 negative | hbridge_out | single_source | |
| OEM-A36-10 | Ignition coil 2 (IGT2) | ignition_out | PROTEUS-Black35-34 | Ignition 2 | ignition_out | single_source | |
| OEM-A36-11 | Purge valve (PRG) | low_side_out | — | — | — | single_source | |
| OEM-A36-12 | Injector 1 port (#10) | injector_out | PROTEUS-Black35-3 | Injector 1 | injector_out | single_source | |
| OEM-A36-13 | Injector 4 port (#40) | injector_out | PROTEUS-Black35-7 | Injector 7 | injector_out | single_source | |
| OEM-A36-14 | Injector 1 direct (#1) | injector_out | PROTEUS-Black35-15 | Injector 2 | injector_out | single_source | |
| OEM-A36-16 | OCV intake bank 2 (OC2) | low_side_out | — | — | — | single_source | |
| OEM-A36-17 | OCV intake bank 1 (OC1) | low_side_out | — | — | — | single_source | |
| OEM-A36-18 | Throttle position (VTA1) | analog_in | PROTEUS-White35-26 | Analog Volt 6 | analog_in | single_source | |
| OEM-A36-19 | Sensor 5V supply (VC) | vref | PROTEUS-White35-10 | 5V supply #2 | vref | single_source | |
| OEM-A36-2 | Throttle actuator motor + (M+) | hbridge_out | PROTEUS-Black23-7 | ETB 1 positive | hbridge_out | single_source | |
| OEM-A36-20 | Oil temperature (OT) | temp_in | PROTEUS-White35-19 | Thermistor 1 | temp_in | single_source | |
| OEM-A36-21 | Ignition coil 1 (IGT1) | ignition_out | PROTEUS-Black35-35 | Ignition 1 | ignition_out | single_source | |
| OEM-A36-22 | Injector 2 port (#20) | injector_out | PROTEUS-Black35-4 | Injector 3 | injector_out | single_source | |
| OEM-A36-23 | Injector 4 direct (#4) | injector_out | PROTEUS-Black35-19 | Injector 8 | injector_out | single_source | |
| OEM-A36-24 | Injector 3 direct (#3) | injector_out | PROTEUS-Black35-5 | Injector 5 | injector_out | single_source | |
| OEM-A36-25 | Injector 2 direct (#2) | injector_out | PROTEUS-Black35-16 | Injector 4 | injector_out | single_source | |
| OEM-A36-28 | Throttle position 2 (VTA2) | analog_in | PROTEUS-White35-25 | Analog Volt 4 | analog_in | single_source | |
| OEM-A36-29 | Sensor ground (E1) | sensor_ground | PROTEUS-Black23-12 + PROTEUS-Black23-13 + PROTEUS-White35-1 + PROTEUS-White35-2 + PROTEUS-White35-23 + PROTEUS-White35-29 + PROTEUS-White35-3 + PROTEUS-White35-4 + PROTEUS-White35-5 + PROTEUS-White35-6 + PROTEUS-White35-7 + PROTEUS-White35-8 | VR 2 negative + VR 1 negative + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground + Sensor ground | sensor_ground + trigger_in | single_source | |
| OEM-A36-3 | Power ground (E02) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A36-30 | Engine coolant temperature (THW) | temp_in | PROTEUS-White35-20 | Coolant temp (CLT) | temp_in | single_source | |
| OEM-A36-31 | Ignition coil 3 (IGT3) | ignition_out | PROTEUS-Black35-22 | Ignition 3 | ignition_out | single_source | |
| OEM-A36-32 | Injector 3 port (#30) | injector_out | PROTEUS-Black35-6 | Injector 6 | injector_out | single_source | |
| OEM-A36-4 | Power ground (E01) | ground | PROTEUS-Black23-14 + PROTEUS-Black23-19 + PROTEUS-Black23-20 + PROTEUS-Black35-17 + PROTEUS-Black35-18 + PROTEUS-Black35-24 | Power ground + Power ground + Power ground + Power ground + Power ground + Power ground | ground | single_source | |
| OEM-A36-5 | OCV exhaust bank 2 (OE2) | low_side_out | — | — | — | single_source | |
| OEM-A36-6 | Heated oxygen sensor heater (HT1B) | low_side_out | PROTEUS-Black23-8 | ETB 2 negative | hbridge_out | single_source | |
| OEM-A36-7 | OCV exhaust bank 1 (OE1) | low_side_out | — | — | — | single_source | |
| OEM-A36-8 | Ignition coil 4 (IGT4) | ignition_out | PROTEUS-Black35-33 | Ignition 4 | ignition_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | no route | ECU power (+B2, main relay) | — | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | no route | ECU power (+B, main relay) | — | |
| W3 | SP-14V-1 | PROTEUS-Black23-23 | 0.85 | no route | Main relay feed | — | |
| W4 | OEM-A33-4 | SP-GND-1 | 0.85 | no route | Power ground (EC) | — | |
| W5 | OEM-A34-1 | SP-GND-1 | 0.85 | no route | Power ground (E03) | — | |
| W6 | OEM-A34-2 | SP-GND-1 | 0.85 | no route | Power ground (E04) | — | |
| W7 | OEM-A34-3 | SP-GND-1 | 0.85 | no route | Power ground (E05) | — | |
| W8 | OEM-A36-3 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W9 | OEM-A36-4 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W10 | SP-GND-1 | PROTEUS-Black23-14 | 0.85 | no route | Power ground | — | |
| W11 | SP-GND-1 | PROTEUS-Black23-19 | 0.85 | no route | Power ground | — | |
| W12 | SP-GND-1 | PROTEUS-Black23-20 | 0.85 | no route | Power ground | — | |
| W13 | SP-GND-1 | PROTEUS-Black35-17 | 0.85 | no route | Power ground | — | |
| W14 | SP-GND-1 | PROTEUS-Black35-18 | 0.85 | no route | Power ground | — | |
| W15 | SP-GND-1 | PROTEUS-Black35-24 | 0.85 | no route | Power ground | — | |
| W16 | OEM-A33-29 | SP-0V-1 | 0.5 | no route | MAF sensor ground (E2G) | — | |
| W17 | OEM-A34-27 | SP-0V-1 | 0.5 | no route | Crank position return (NE-) | — | |
| W18 | OEM-A35-29 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA) | — | |
| W19 | OEM-A35-30 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA2) | — | |
| W20 | OEM-A36-29 | SP-0V-1 | 0.5 | no route | Sensor ground (E1) | — | |
| W21 | SP-0V-1 | PROTEUS-White35-1 | 0.5 | no route | Sensor ground | — | |
| W22 | SP-0V-1 | PROTEUS-White35-2 | 0.5 | no route | Sensor ground | — | |
| W23 | SP-0V-1 | PROTEUS-White35-23 | 0.5 | no route | Sensor ground | — | |
| W24 | SP-0V-1 | PROTEUS-White35-29 | 0.5 | no route | Sensor ground | — | |
| W25 | SP-0V-1 | PROTEUS-White35-3 | 0.5 | no route | Sensor ground | — | |
| W26 | SP-0V-1 | PROTEUS-White35-4 | 0.5 | no route | Sensor ground | — | |
| W27 | SP-0V-1 | PROTEUS-White35-5 | 0.5 | no route | Sensor ground | — | |
| W28 | SP-0V-1 | PROTEUS-White35-6 | 0.5 | no route | Sensor ground | — | |
| W29 | SP-0V-1 | PROTEUS-White35-7 | 0.5 | no route | Sensor ground | — | |
| W30 | SP-0V-1 | PROTEUS-White35-8 | 0.5 | no route | Sensor ground | — | |
| W31 | OEM-A34-34 | SP-5V1-1 | 0.5 | no route | OCV power source (VCV, 5V) | — | |
| W32 | OEM-A35-21 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCPA) | — | |
| W33 | OEM-A35-22 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCP2) | — | |
| W34 | OEM-A36-19 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VC) | — | |
| W35 | SP-5V1-1 | PROTEUS-White35-10 | 0.5 | no route | 5V supply #2 | — | |
| W36 | OEM-A34-16 | PROTEUS-Black23-5 | 0.5 | no route | Crank position (NE+) | — | |
| W37 | SP-0V-1 | PROTEUS-Black23-13 | 0.5 | no route | VR 1 negative | — | |
| W38 | OEM-A34-14 | PROTEUS-Black23-1 | 0.5 | no route | VVT cam sensor exhaust bank 1 (EV1+) | — | |
| W39 | OEM-A34-26 | PROTEUS-Black23-4 | 0.5 | no route | VVT cam sensor intake bank 1 (VV1+) | — | |
| W40 | SP-0V-1 | PROTEUS-Black23-12 | 0.5 | no route | VR 2 negative | — | |
| W41 | OEM-A34-25 | PROTEUS-Black23-2 | 0.5 | no route | VVT cam sensor exhaust bank 2 (EV2+) | — | |
| W42 | OEM-A34-28 | PROTEUS-White35-34 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W43 | OEM-A34-17 | PROTEUS-White35-35 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W44 | OEM-A36-21 | PROTEUS-Black35-35 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W45 | OEM-A36-10 | PROTEUS-Black35-34 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W46 | OEM-A36-31 | PROTEUS-Black35-22 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W47 | OEM-A36-8 | PROTEUS-Black35-33 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W48 | OEM-A36-12 | PROTEUS-Black35-3 | 0.5 | no route | Injector 1 port (#10) | — | |
| W49 | OEM-A36-14 | PROTEUS-Black35-15 | 0.5 | no route | Injector 1 direct (#1) | — | |
| W50 | OEM-A36-22 | PROTEUS-Black35-4 | 0.5 | no route | Injector 2 port (#20) | — | |
| W51 | OEM-A36-25 | PROTEUS-Black35-16 | 0.5 | no route | Injector 2 direct (#2) | — | |
| W52 | OEM-A36-24 | PROTEUS-Black35-5 | 0.5 | no route | Injector 3 direct (#3) | — | |
| W53 | OEM-A36-32 | PROTEUS-Black35-6 | 0.5 | no route | Injector 3 port (#30) | — | |
| W54 | OEM-A36-13 | PROTEUS-Black35-7 | 0.5 | no route | Injector 4 port (#40) | — | |
| W55 | OEM-A36-23 | PROTEUS-Black35-19 | 0.5 | no route | Injector 4 direct (#4) | — | |
| W56 | OEM-A33-27 | PROTEUS-Black23-18 | 0.5 | no route | Ignition switch sense (IGSW, IG2 relay) | — | |
| W57 | OEM-A36-1 | PROTEUS-Black23-6 | 0.5 | no route | Throttle actuator motor - (M-) | — | |
| W58 | OEM-A36-2 | PROTEUS-Black23-7 | 0.5 | no route | Throttle actuator motor + (M+) | — | |
| W59 | OEM-A35-13 | PROTEUS-Black35-20 | 0.5 | no route | EFI main relay 1 (SSHUT) | — | |
| W60 | OEM-A35-12 | PROTEUS-Black35-9 | 0.5 | no route | Cooling fan relay 2 (FAN2) | — | |
| W61 | OEM-A35-11 | PROTEUS-Black35-21 | 0.5 | no route | Cooling fan relay 3 (FAN1) | — | |
| W62 | OEM-A33-20 | PROTEUS-Black35-10 | 0.5 | no route | Blower relay (HB) | — | |
| W63 | OEM-A35-17 | PROTEUS-Black35-11 | 0.5 | no route | ETCS relay (MCR) | — | |
| W64 | OEM-A35-35 | PROTEUS-Black35-12 | 0.5 | no route | A/C clutch relay (AC) | — | |
| W65 | OEM-A35-5 | PROTEUS-Black35-23 | 0.5 | no route | Injector relay (IREL) | — | |
| W66 | OEM-A35-7 | PROTEUS-Black35-8 | 0.5 | no route | ETCS relay (+BM) | — | |
| W67 | OEM-A34-5 | PROTEUS-Black23-15 | 0.5 | no route | A/F ratio sensor heater (HA1A) | — | |
| W68 | OEM-A36-6 | PROTEUS-Black23-8 | 0.5 | no route | Heated oxygen sensor heater (HT1B) | — | |
| W69 | OEM-A33-22 | PROTEUS-White35-13 | 0.5 | no route | Mass air flow (VG) | — | |
| W70 | OEM-A34-20 | PROTEUS-White35-24 | 0.5 | no route | Manifold absolute pressure (PIM) | — | |
| W71 | OEM-A35-31 | PROTEUS-White35-14 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W72 | OEM-A36-28 | PROTEUS-White35-25 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W73 | OEM-A35-23 | PROTEUS-White35-15 | 0.5 | no route | Accelerator pedal position (VPA) | — | |
| W74 | OEM-A36-18 | PROTEUS-White35-26 | 0.5 | no route | Throttle position (VTA1) | — | |
| W75 | OEM-A34-21 | PROTEUS-White35-16 | 0.5 | no route | Heated oxygen sensor (OX1B, rear) | — | |
| W76 | OEM-A36-30 | PROTEUS-White35-20 | 0.5 | no route | Engine coolant temperature (THW) | — | |
| W77 | OEM-A33-12 | PROTEUS-White35-30 | 0.5 | no route | Intake air temperature (THA, in MAF) | — | |
| W78 | OEM-A36-20 | PROTEUS-White35-19 | 0.5 | no route | Oil temperature (OT) | — | |
| W79 | OEM-A33-8 | PROTEUS-White35-27 | 0.5 | no route | A/C pressure sensor (ACP) | — | |
| W80 | OEM-A34-11 | PROTEUS-White35-17 | 0.5 | no route | DI injector confirmation (IJF1) | — | |
| W81 | OEM-A34-31 | PROTEUS-White35-28 | 0.5 | no route | DI injector confirmation (IJF2) | — | |
| W82 | OEM-A34-9 | PROTEUS-White35-18 | 0.5 | no route | Fuel pressure sensor (PR) | — | |
| W83 | OEM-A33-14 | PROTEUS-Black23-10 | 0.5 | no route | Starter signal (STSW2) | — | |
| W84 | OEM-A33-15 | PROTEUS-Black23-3 | 0.5 | no route | Clutch switch (CLSW) | — | |
| W85 | OEM-A33-16 | PROTEUS-Black23-9 | 0.5 | no route | Neutral switch (NSW) | — | |
| W86 | OEM-A33-17 | PROTEUS-Black23-11 | 0.5 | no route | Starter signal (STSW2) | — | |
| W87 | OEM-A33-19 | PROTEUS-Black23-17 | 0.5 | no route | CAN high (CANH) | — | |
| W88 | OEM-A33-18 | PROTEUS-Black23-16 | 0.5 | no route | CAN low (CANL) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (10)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 1 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| warn | DBW_MOTOR_CURRENT | PROTEUS-Black23-6 | Cannot confirm Proteus can drive the throttle motor: neither the motor current (OEM-A36-1) nor the rating of PROTEUS-Black23-6 "ETB 1 negative" is known. |
| warn | DBW_MOTOR_CURRENT | PROTEUS-Black23-7 | Cannot confirm Proteus can drive the throttle motor: neither the motor current (OEM-A36-2) nor the rating of PROTEUS-Black23-7 "ETB 1 positive" is known. |
| warn | NET_FAMILY | OEM-A34-25 ↔ PROTEUS-Black23-2 | OEM-A34-25 "VVT cam sensor exhaust bank 2 (EV2+)" [trigger_in] is wired to PROTEUS-Black23-2 "Digital 3" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| warn | NET_FAMILY | OEM-A34-5 ↔ PROTEUS-Black23-15 | OEM-A34-5 "A/F ratio sensor heater (HA1A)" [low_side_out] is wired to PROTEUS-Black23-15 "ETB 2 positive" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-A36-6 ↔ PROTEUS-Black23-8 | OEM-A36-6 "Heated oxygen sensor heater (HT1B)" [low_side_out] is wired to PROTEUS-Black23-8 "ETB 2 negative" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NO_FUEL_PUMP | fuel pump | This engine harness has no fuel-pump control path: no fuel-pump relay output is wired to the new ECU. If the stock car switches the pump outside the ECU (an airflow-meter contact or a separate module), the standalone must drive the pump relay itself — see the install notes for this car. |
| info | NET_FAMILY | OEM-A35-7 ↔ PROTEUS-Black35-8 | OEM-A35-7 "ETCS relay (+BM)" [low_side_out] is wired to PROTEUS-Black35-8 "Injector 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | PROTEUS-White35-8 ↔ PROTEUS-Black23-13 | PROTEUS-White35-8 "Sensor ground" [sensor_ground] is wired to PROTEUS-Black23-13 "VR 1 negative" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 23 optional OEM pins are not mapped: OEM-A33-28 Shield ground (SLE2); OEM-A33-3 Stop light switch (ST1-); OEM-A33-7 Stop light switch (STP); OEM-A34-13 High-pressure fuel pump spill valve (FPF); OEM-A34-15 VVT cam sensor intake bank 2 (VV2+); OEM-A34-18 A/F ratio sensor (A1A-); OEM-A34-19 A/F ratio sensor (A1A+); OEM-A34-29 Shield ground (EKNK); OEM-A34-30 Shield ground (SLE1); OEM-A34-32 High-pressure fuel pump spill valve (FPD); OEM-A34-35 Shield ground (SLE3); OEM-A35-1 Canister vent valve (VPMP); OEM-A35-10 Fuel pump control monitor (DI); OEM-A35-15 Tachometer output (TACH); OEM-A35-19 Fuel pump control (FPC); OEM-A35-20 Canister pressure sensor (PPMP); OEM-A35-26 Starter signal (STA); OEM-A35-8 Leak detection pump (MPMP); OEM-A36-11 Purge valve (PRG); OEM-A36-16 OCV intake bank 2 (OC2); OEM-A36-17 OCV intake bank 1 (OC1); OEM-A36-5 OCV exhaust bank 2 (OE2); OEM-A36-7 OCV exhaust bank 1 (OE1) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-A33-2 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-09. Review every wire against both manuals before building. Not wired: - OEM-A33 2: Battery constant (BATT, memory): rusEFI Proteus has no battery-constant input; not needed - OEM-A34 15: VVT cam sensor intake bank 2 (VV2+): no free cam_hall/cam_vr/frequency_in input on rusEFI Proteus - OEM-A33 28: Shield ground (SLE2): no shield pin on rusEFI Proteus - OEM-A34 29: Shield ground (EKNK): no shield pin on rusEFI Proteus - OEM-A34 30: Shield ground (SLE1): no shield pin on rusEFI Proteus - OEM-A34 35: Shield ground (SLE3): no shield pin on rusEFI Proteus - OEM-A36 17: OCV intake bank 1 (OC1): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A36 7: OCV exhaust bank 1 (OE1): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A36 16: OCV intake bank 2 (OC2): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A36 5: OCV exhaust bank 2 (OE2): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A34 13: High-pressure fuel pump spill valve (FPF): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A34 32: High-pressure fuel pump spill valve (FPD): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A35 1: Canister vent valve (VPMP): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A35 19: Fuel pump control (FPC): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A35 8: Leak detection pump (MPMP): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A36 11: Purge valve (PRG): no free low_side/ls_hs/injector/hbridge on rusEFI Proteus - OEM-A35 15: Tachometer output (TACH): no free tacho/frequency_out/low_side/ls_hs on rusEFI Proteus - OEM-A35 10: Fuel pump control monitor (DI): no free analog_0_5 on rusEFI Proteus - OEM-A35 20: Canister pressure sensor (PPMP): no free analog_0_5 on rusEFI Proteus - OEM-A33 3: Stop light switch (ST1-): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-A33 7: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-A35 26: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on rusEFI Proteus - OEM-A34 18: A/F ratio sensor (A1A-): not classified in the library; wire by hand - OEM-A34 19: A/F ratio sensor (A1A+): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Scion FR-S / Toyota 86 Repair Manual (2013) — FA20 ECM terminal pinout (SFI system) | https://gt86.me/images/0/09/2013_Scion_FR-S_Repair_Manual.pdf | — | — | — |
| 4 | vendor_doc | rusEFI Proteus — board connector definitions (Black35 / White35 / Black23) | https://github.com/rusefi/rusefi/tree/master/firmware/config/boards/proteus/connectors | archive | 2026-10-05 | 738a2ea934c0 |