Toyota Supra A80 1997-2002 JDM (2JZ-GTE VVT-i, single-turbo) → MaxxECU MaxxECU GEN2 RACE (auto)
Toyota Supra A80 1997-2002 JDM (2JZ-GTE VVT-i, single-turbo) — MaxxECU — MaxxECU GEN2 RACE
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 2: read the Findings page before cutting any wire |
| Size of the job | 82 wires · 14 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-B78-16 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-B78-7 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-B78-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | MAXXECUGEN2R-MX1-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | SP-14V-1 | MAXXECUGEN2R-MX2-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-B74-21 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-B74-31 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-B74-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-B75-17 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | MAXXECUGEN2R-MX1-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | MAXXECUGEN2R-MX2-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | MAXXECUGEN2R-MX3-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-B74-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-B75-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-B75-19 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-B78-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | MAXXECUGEN2R-MX1-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-B75-2 | MAXXECUGEN2R-MX1-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B74-23 | MAXXECUGEN2R-MX1-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B74-10 | MAXXECUGEN2R-MX1-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-B74-28 | MAXXECUGEN2R-MX2-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-B74-27 | MAXXECUGEN2R-MX2-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-B74-11 | MAXXECUGEN2R-MX1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-B74-12 | MAXXECUGEN2R-MX1-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-B74-13 | MAXXECUGEN2R-MX1-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-B75-5 | MAXXECUGEN2R-MX1-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-B75-6 | MAXXECUGEN2R-MX1-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-B74-1 | MAXXECUGEN2R-MX1-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-B74-2 | MAXXECUGEN2R-MX1-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-B74-3 | MAXXECUGEN2R-MX2-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-B74-4 | MAXXECUGEN2R-MX2-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-B74-30 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | SP-SHD-1 | MAXXECUGEN2R-MX1-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-B78-9 | MAXXECUGEN2R-MX2-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-B74-17 | MAXXECUGEN2R-MX1-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-B74-18 | MAXXECUGEN2R-MX1-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-B74-19 | MAXXECUGEN2R-MX1-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-B74-20 | MAXXECUGEN2R-MX1-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-B75-9 | MAXXECUGEN2R-MX1-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-B75-15 | MAXXECUGEN2R-MX1-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-B75-23 | MAXXECUGEN2R-MX1-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-B75-16 | MAXXECUGEN2R-MX1-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-B75-24 | MAXXECUGEN2R-MX1-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-B75-14 | MAXXECUGEN2R-MX2-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-B77-13 | MAXXECUGEN2R-MX1-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-B78-10 | MAXXECUGEN2R-MX2-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-B75-4 | MAXXECUGEN2R-MX2-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-B76-1 | MAXXECUGEN2R-MX3-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-B76-2 | MAXXECUGEN2R-MX3-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-B76-3 | MAXXECUGEN2R-MX3-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-B76-6 | MAXXECUGEN2R-MX3-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-B74-15 | MAXXECUGEN2R-MX3-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-B74-5 | MAXXECUGEN2R-MX3-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-B75-3 | MAXXECUGEN2R-MX3-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-B75-7 | MAXXECUGEN2R-MX4-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-B76-12 | MAXXECUGEN2R-MX4-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-B76-13 | MAXXECUGEN2R-MX4-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-B76-14 | MAXXECUGEN2R-MX4-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-B75-10 | MAXXECUGEN2R-MX2-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-B75-12 | MAXXECUGEN2R-MX2-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-B75-22 | MAXXECUGEN2R-MX2-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-B76-17 | MAXXECUGEN2R-MX2-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-B77-25 | MAXXECUGEN2R-MX1-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-B76-11 | MAXXECUGEN2R-MX1-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-B76-5 | MAXXECUGEN2R-MX4-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-B74-25 | MAXXECUGEN2R-MX4-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-B76-10 | MAXXECUGEN2R-MX4-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-B76-4 | MAXXECUGEN2R-MX4-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-B75-21 | MAXXECUGEN2R-MX2-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-B75-20 | MAXXECUGEN2R-MX2-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-B74-24 | MAXXECUGEN2R-MX2-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-B75-8 | MAXXECUGEN2R-MX2-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-B77-1 | MAXXECUGEN2R-MX2-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-B77-14 | MAXXECUGEN2R-MX2-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-B77-16 | MAXXECUGEN2R-MX3-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-B77-2 | MAXXECUGEN2R-MX3-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-B77-21 | MAXXECUGEN2R-MX3-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-B77-26 | MAXXECUGEN2R-MX3-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-B77-4 | MAXXECUGEN2R-MX3-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-B77-5 | MAXXECUGEN2R-MX3-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-B77-6 | MAXXECUGEN2R-MX3-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W82 | OEM-B77-7 | MAXXECUGEN2R-MX3-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MAXXECUGEN2R-MX1-12 | MAXXECUGEN2R-MX1-25 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 2 | MAXXECUGEN2R-MX1-14 | MAXXECUGEN2R-MX1-12 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 3 | MAXXECUGEN2R-MX1-14 | MAXXECUGEN2R-MX1-25 | open (OL) | sensor ground must not touch +12 V supply | |
| 4 | MAXXECUGEN2R-MX1-9 | MAXXECUGEN2R-MX1-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | MAXXECUGEN2R-MX1-9 | MAXXECUGEN2R-MX1-25 | open (OL) | power ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUGEN2R-MX1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 1 | — | W23 | — | 0.5 | OEM-B74-11 | — | — | — |
| 10 | Digital/VR 1 SIGNAL + | — | W19 | — | 0.5 | OEM-B74-23 | — | — | — |
| 11 | Digital/VR 1 SIGNAL - | — | W33 | — | 0.5 | SP-SHD-1 | — | — | — |
| 12 | Digital/VR 1 POWER SUPPLY | — | W18 | — | 0.5 | OEM-B75-2 | — | — | — |
| 13 | Digital/VR 1 SHIELD | — | — | — | — | — | — | — | — |
| 14 | SENSOR GND | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | CAN L | — | — | — | — | — | — | — | — |
| 16 | CAN H | — | — | — | — | — | — | — | — |
| 17 | GP out 5 (GND) | — | W45 | — | 0.5 | OEM-B77-13 | — | — | — |
| 18 | Digital/VR 2 SIGNAL + | — | W20 | — | 0.5 | OEM-B74-10 | — | — | — |
| 19 | Digital/VR 2 SIGNAL - | — | — | — | — | — | — | — | — |
| 2 | Ignition 2 | — | W24 | — | 0.5 | OEM-B74-12 | — | — | — |
| 20 | Digital/VR 2 POWER SUPPLY | — | — | — | — | — | — | — | — |
| 21 | Digital/VR 2 SHIELD | — | — | — | — | — | — | — | — |
| 22 | 5V power supply | — | — | — | — | — | — | — | — |
| 23 | Digital/VR 3 SIGNAL + | — | W63 | — | 0.5 | OEM-B77-25 | — | — | — |
| 24 | Digital/VR 4 SIGNAL + | — | W64 | — | 0.5 | OEM-B76-11 | — | — | — |
| 25 | 12V supply 1 | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | AIN 1 | — | W39 | — | 0.5 | OEM-B75-9 | — | — | — |
| 27 | AIN 2 | — | W40 | — | 0.5 | OEM-B75-15 | — | — | — |
| 28 | AIN 3 | — | W41 | — | 0.5 | OEM-B75-23 | — | — | — |
| 29 | AIN 4 | — | W42 | — | 0.5 | OEM-B75-16 | — | — | — |
| 3 | Ignition 3 | — | W25 | — | 0.5 | OEM-B74-13 | — | — | — |
| 30 | AIN 5 | — | W43 | — | 0.5 | OEM-B75-24 | — | — | — |
| 31 | INJECTOR 1 | — | W26 | — | 0.5 | OEM-B75-5 | — | — | — |
| 32 | INJECTOR 2 | — | W27 | — | 0.5 | OEM-B75-6 | — | — | — |
| 33 | INJECTOR 3 | — | W28 | — | 0.5 | OEM-B74-1 | — | — | — |
| 34 | INJECTOR 4 | — | W29 | — | 0.5 | OEM-B74-2 | — | — | — |
| 4 | Ignition 4 | — | — | — | — | — | — | — | — |
| 5 | GP out 1 (GND) | — | W35 | — | 0.5 | OEM-B74-17 | — | — | — |
| 6 | GP out 2 (GND) | — | W36 | — | 0.5 | OEM-B74-18 | — | — | — |
| 7 | GP out 3 (GND) | — | W37 | — | 0.5 | OEM-B74-19 | — | — | — |
| 8 | GP out 4 (GND) | — | W38 | — | 0.5 | OEM-B74-20 | — | — | — |
| 9 | Engine gnd | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 5 | — | — | — | — | — | — | — | — |
| 10 | WBO2 Sensor 1 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 Sensor 1 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP OUT 7 / WBO2 Sensor 1 H- | — | W47 | — | 0.5 | OEM-B75-4 | — | — | — |
| 13 | AIN 9 | — | W61 | — | 0.5 | OEM-B75-22 | — | — | — |
| 14 | AIN 10 | — | W62 | — | 0.5 | OEM-B76-17 | — | — | — |
| 15 | AIN 11 | — | W69 | — | 0.5 | OEM-B75-21 | — | — | — |
| 16 | AIN 12 | — | W70 | — | 0.5 | OEM-B75-20 | — | — | — |
| 17 | AIN 13 | — | W71 | — | 0.5 | OEM-B74-24 | — | — | — |
| 18 | WBO2 sensor 1 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 1 IP | — | — | — | — | — | — | — | — |
| 2 | Ignition 6 | — | — | — | — | — | — | — | — |
| 20 | 12V WBO2 sensor 1 H+ | — | — | — | — | — | — | — | — |
| 21 | WBO2 sensor 1 SHIELD | — | — | — | — | — | — | — | — |
| 22 | AIN 14 | — | W72 | — | 0.5 | OEM-B75-8 | — | — | — |
| 23 | AIN 15 | — | W73 | — | 0.5 | OEM-B77-1 | — | — | — |
| 24 | 12V supply 3 | — | W34 | — | 0.5 | OEM-B78-9 | — | — | — |
| 25 | 12V supply 2 | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | KNOCK1 SHIELD | — | — | — | — | — | — | — | — |
| 27 | KNOCK 1- | — | — | — | — | — | — | — | — |
| 28 | KNOCK 1+ | — | W21 | — | 0.5 | OEM-B74-28 | — | — | — |
| 29 | KNOCK 2 SHIELD | — | — | — | — | — | — | — | — |
| 3 | GP out 6 (GND) | — | W46 | — | 0.5 | OEM-B78-10 | — | — | — |
| 30 | KNOCK 2- | — | — | — | — | — | — | — | — |
| 31 | KNOCK 2+ | — | W22 | — | 0.5 | OEM-B74-27 | — | — | — |
| 32 | AIN 16 | — | W74 | — | 0.5 | OEM-B77-14 | — | — | — |
| 33 | INJECTOR 5 | — | W30 | — | 0.5 | OEM-B74-3 | — | — | — |
| 34 | INJECTOR 6 | — | W31 | — | 0.5 | OEM-B74-4 | — | — | — |
| 4 | AIN 6 | — | W44 | — | 0.5 | OEM-B75-14 | — | — | — |
| 5 | AIN 7 | — | W59 | — | 0.5 | OEM-B75-10 | — | — | — |
| 6 | AIN 8 | — | W60 | — | 0.5 | OEM-B75-12 | — | — | — |
| 7 | GP out 13 (H-BRIDGE 1) | — | — | — | — | — | — | — | — |
| 8 | GP out 14 (H-BRIDGE 1) | — | — | — | — | — | — | — | — |
| 9 | Engine gnd | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | GP out 15 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 10 | WBO2 sensor 2 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 sensor 2 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP Out 8 (GND) / WBO2 Sensor 2 H- | — | W48 | — | 0.5 | OEM-B76-1 | — | — | — |
| 13 | WBO2 sensor 2 SHIELD | — | — | — | — | — | — | — | — |
| 14 | GP OUT 9 (12V) | — | — | — | — | — | — | — | — |
| 15 | GP OUT 10 (12V) | — | — | — | — | — | — | — | — |
| 16 | GP OUT 11 (12V) | — | — | — | — | — | — | — | — |
| 17 | GP OUT 12 (12V) | — | — | — | — | — | — | — | — |
| 18 | WBO2 sensor 2 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 2 IP | — | — | — | — | — | — | — | — |
| 2 | GP out 16 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 20 | 12V WBO2 sensor 2 (H+) | — | — | — | — | — | — | — | — |
| 21 | AIN 17 | — | W75 | — | 0.5 | OEM-B77-16 | — | — | — |
| 22 | AIN 18 | — | W76 | — | 0.5 | OEM-B77-2 | — | — | — |
| 23 | AIN 19 | — | W77 | — | 0.5 | OEM-B77-21 | — | — | — |
| 24 | AIN 20 | — | W78 | — | 0.5 | OEM-B77-26 | — | — | — |
| 25 | AIN 21 | — | W79 | — | 0.5 | OEM-B77-4 | — | — | — |
| 26 | AIN 22 | — | W80 | — | 0.5 | OEM-B77-5 | — | — | — |
| 27 | AIN 23 | — | W81 | — | 0.5 | OEM-B77-6 | — | — | — |
| 28 | AIN 24 | — | W82 | — | 0.5 | OEM-B77-7 | — | — | — |
| 29 | INJECTOR 7 | — | W49 | — | 0.5 | OEM-B76-2 | — | — | — |
| 3 | Ignition 7 | — | — | — | — | — | — | — | — |
| 30 | INJECTOR 8 | — | W50 | — | 0.5 | OEM-B76-3 | — | — | — |
| 31 | INJECTOR 9 | — | W51 | — | 0.5 | OEM-B76-6 | — | — | — |
| 32 | INJECTOR 10 | — | W52 | — | 0.5 | OEM-B74-15 | — | — | — |
| 33 | INJECTOR 11 | — | W53 | — | 0.5 | OEM-B74-5 | — | — | — |
| 34 | INJECTOR 12 | — | W54 | — | 0.5 | OEM-B75-3 | — | — | — |
| 4 | Ignition 8 | — | — | — | — | — | — | — | — |
| 5 | Ignition 9 | — | — | — | — | — | — | — | — |
| 6 | Ignition 10 | — | — | — | — | — | — | — | — |
| 7 | Ignition 11 | — | — | — | — | — | — | — | — |
| 8 | Ignition 12 | — | — | — | — | — | — | — | — |
| 9 | Engine gnd | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital/VR 5 SHIELD | — | — | — | — | — | — | — | — |
| 10 | EGT 1 + | — | — | — | — | — | — | — | — |
| 11 | EGT 2 + | — | — | — | — | — | — | — | — |
| 12 | EGT 3 + | — | — | — | — | — | — | — | — |
| 13 | EGT 4 + | — | — | — | — | — | — | — | — |
| 14 | EGT 5 + | — | — | — | — | — | — | — | — |
| 15 | EGT 6 + | — | — | — | — | — | — | — | — |
| 16 | EGT 7 + | — | — | — | — | — | — | — | — |
| 17 | EGT 8 + | — | — | — | — | — | — | — | — |
| 18 | EGT 1 - | — | — | — | — | — | — | — | — |
| 19 | EGT 2 - | — | — | — | — | — | — | — | — |
| 2 | Digital/VR 5 SIGNAL - | — | — | — | — | — | — | — | — |
| 20 | EGT 3 - | — | — | — | — | — | — | — | — |
| 21 | EGT 4 - | — | — | — | — | — | — | — | — |
| 22 | EGT 5 - | — | — | — | — | — | — | — | — |
| 23 | EGT 6 - | — | — | — | — | — | — | — | — |
| 24 | EGT 7 - | — | — | — | — | — | — | — | — |
| 25 | EGT 8 - | — | — | — | — | — | — | — | — |
| 26 | Digital/VR 8 SHIELD | — | — | — | — | — | — | — | — |
| 27 | Digital/VR 8 SIGNAL - | — | — | — | — | — | — | — | — |
| 28 | Digital/VR 8 SIGNAL + | — | W68 | — | 0.5 | OEM-B76-4 | — | — | — |
| 29 | CAN 2 L | — | — | — | — | — | — | — | — |
| 3 | Digital/VR 5 SIGNAL + | — | W65 | — | 0.5 | OEM-B76-5 | — | — | — |
| 30 | CAN 2 H | — | — | — | — | — | — | — | — |
| 31 | INJECTOR 13 | — | W55 | — | 0.5 | OEM-B75-7 | — | — | — |
| 32 | INJECTOR 14 | — | W56 | — | 0.5 | OEM-B76-12 | — | — | — |
| 33 | INJECTOR 15 | — | W57 | — | 0.5 | OEM-B76-13 | — | — | — |
| 34 | INJECTOR 16 | — | W58 | — | 0.5 | OEM-B76-14 | — | — | — |
| 4 | Digital/VR 6 SHIELD | — | — | — | — | — | — | — | — |
| 5 | Digital/VR 6 SIGNAL - | — | — | — | — | — | — | — | — |
| 6 | Digital/VR 6 SIGNAL + | — | W66 | — | 0.5 | OEM-B74-25 | — | — | — |
| 7 | Digital/VR 7 SHIELD | — | — | — | — | — | — | — | — |
| 8 | Digital/VR 7 SIGNAL - | — | — | — | — | — | — | — | — |
| 9 | Digital/VR 7 SIGNAL + | — | W67 | — | 0.5 | OEM-B76-10 | — | — | — |
OEM-B74
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 3 (#30) | — | W28 | — | 0.5 | MAXXECUGEN2R-MX1-33 | — | — | — |
| 10 | Cam position (G2) | — | W20 | — | 0.5 | MAXXECUGEN2R-MX1-18 | — | — | — |
| 11 | Ignition 1 (IGT, cyl 1&6) | — | W23 | — | 0.5 | MAXXECUGEN2R-MX1-1 | — | — | — |
| 12 | Ignition 2 (IGT2, cyl 5&2) | — | W24 | — | 0.5 | MAXXECUGEN2R-MX1-2 | — | — | — |
| 13 | Ignition 3 (IGT3, cyl 3&4) | — | W25 | — | 0.5 | MAXXECUGEN2R-MX1-3 | — | — | — |
| 15 | Wastegate VSV (PMC) | — | W52 | — | 0.5 | MAXXECUGEN2R-MX3-32 | — | — | — |
| 17 | VVT-i OCV - (OCV-) | — | W35 | — | 0.5 | MAXXECUGEN2R-MX1-5 | — | — | — |
| 18 | VVT-i OCV + (OCV+) | — | W36 | — | 0.5 | MAXXECUGEN2R-MX1-6 | — | — | — |
| 19 | ETCS-i clutch - (CL-) | — | W37 | — | 0.5 | MAXXECUGEN2R-MX1-7 | — | — | — |
| 2 | Injector 4 (#40) | — | W29 | — | 0.5 | MAXXECUGEN2R-MX1-34 | — | — | — |
| 20 | ETCS-i clutch + (CL+) | — | W38 | — | 0.5 | MAXXECUGEN2R-MX1-8 | — | — | — |
| 21 | Power ground (E01) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 22 | Crank/cam sensor return (NE-) | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Crank position (NE+) | — | W19 | — | 0.5 | MAXXECUGEN2R-MX1-10 | — | — | — |
| 24 | Neutral/park switch (NSW) | — | W71 | — | 0.5 | MAXXECUGEN2R-MX2-17 | — | — | — |
| 25 | Igniter verification (IGF) | — | W66 | — | 0.5 | MAXXECUGEN2R-MX4-6 | — | — | — |
| 27 | Knock sensor 2 (KNK2, rear) | — | W22 | — | 0.5 | MAXXECUGEN2R-MX2-31 | — | — | — |
| 28 | Knock sensor 1 (KNK1, front) | — | W21 | — | 0.5 | MAXXECUGEN2R-MX2-28 | — | — | — |
| 3 | Injector 5 (#50) | — | W30 | — | 0.5 | MAXXECUGEN2R-MX2-33 | — | — | — |
| 30 | ETCS-i motor shield (GEO1) | — | W32 | — | 0.5 | SP-SHD-1 | — | — | — |
| 31 | Power ground (E02) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Injector 6 (#60) | — | W31 | — | 0.5 | MAXXECUGEN2R-MX2-34 | — | — | — |
| 5 | Intake air bypass VSV (VSV1) | — | W53 | — | 0.5 | MAXXECUGEN2R-MX3-33 | — | — | — |
| 7 | ETCS-i motor - (M-) | — | — | — | — | — | — | — | — |
| 8 | ETCS-i motor + (M+) | — | — | — | — | — | — | — | — |
| 9 | ETCS-i ground (ME01) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-B75
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Mass air flow (VG) | — | W59 | — | 0.5 | MAXXECUGEN2R-MX2-5 | — | — | — |
| 12 | O2 sensor (OX) | — | W60 | — | 0.5 | MAXXECUGEN2R-MX2-6 | — | — | — |
| 14 | Coolant temperature (THW) | — | W44 | — | 0.5 | MAXXECUGEN2R-MX2-4 | — | — | — |
| 15 | Accelerator pedal 1 (VPA) | — | W40 | — | 0.5 | MAXXECUGEN2R-MX1-27 | — | — | — |
| 16 | Accelerator pedal 2 (VPA2) | — | W42 | — | 0.5 | MAXXECUGEN2R-MX1-29 | — | — | — |
| 17 | Power ground (E1) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Sensor ground (E2) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | MAF ground (EVG) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Sensor power (VC) | — | W18 | — | 0.5 | MAXXECUGEN2R-MX1-12 | — | — | — |
| 20 | A/T 2nd-gear indicator (2) | — | W70 | — | 0.5 | MAXXECUGEN2R-MX2-16 | — | — | — |
| 21 | A/T 1st-gear indicator (L) | — | W69 | — | 0.5 | MAXXECUGEN2R-MX2-15 | — | — | — |
| 22 | Intake air temperature (THA) | — | W61 | — | 0.5 | MAXXECUGEN2R-MX2-13 | — | — | — |
| 23 | Throttle position 1 (VTA) | — | W41 | — | 0.5 | MAXXECUGEN2R-MX1-28 | — | — | — |
| 24 | Throttle position 2 (VTA2) | — | W43 | — | 0.5 | MAXXECUGEN2R-MX1-30 | — | — | — |
| 3 | Exhaust gas control VSV (VSV2) | — | W54 | — | 0.5 | MAXXECUGEN2R-MX3-34 | — | — | — |
| 4 | O2 sensor heater (HT) | — | W47 | — | 0.5 | MAXXECUGEN2R-MX2-12 | — | — | — |
| 5 | Injector 1 (#10) | — | W26 | — | 0.5 | MAXXECUGEN2R-MX1-31 | — | — | — |
| 6 | Injector 2 (#20) | — | W27 | — | 0.5 | MAXXECUGEN2R-MX1-32 | — | — | — |
| 7 | EVAP purge VSV (PRG) | — | W55 | — | 0.5 | MAXXECUGEN2R-MX4-31 | — | — | — |
| 8 | Main oil pressure switch (MOPS) | — | W72 | — | 0.5 | MAXXECUGEN2R-MX2-22 | — | — | — |
| 9 | Manifold pressure (PIM) | — | W39 | — | 0.5 | MAXXECUGEN2R-MX1-26 | — | — | — |
OEM-B76
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | A/T shift solenoid 1 (S1) | — | W48 | — | 0.5 | MAXXECUGEN2R-MX3-12 | — | — | — |
| 10 | OD direct-clutch speed (NCO-) | — | W67 | — | 0.5 | MAXXECUGEN2R-MX4-9 | — | — | — |
| 11 | No.2 speed sensor return (SP2-) | — | W64 | — | 0.5 | MAXXECUGEN2R-MX1-24 | — | — | — |
| 12 | Exhaust bypass VSV (VSV3) | — | W56 | — | 0.5 | MAXXECUGEN2R-MX4-32 | — | — | — |
| 13 | A/T lock-up solenoid - (SLU-) | — | W57 | — | 0.5 | MAXXECUGEN2R-MX4-33 | — | — | — |
| 14 | A/T accumulator solenoid - (SLN-) | — | W58 | — | 0.5 | MAXXECUGEN2R-MX4-34 | — | — | — |
| 15 | A/T line-pressure solenoid - (SLT-) | — | — | — | — | — | — | — | — |
| 16 | Fuel pressure-up VSV (FPU) | — | — | — | — | — | — | — | — |
| 17 | A/T oil temperature (OIL) | — | W62 | — | 0.5 | MAXXECUGEN2R-MX2-14 | — | — | — |
| 2 | A/T shift solenoid 2 (S2) | — | W49 | — | 0.5 | MAXXECUGEN2R-MX3-29 | — | — | — |
| 3 | A/T shift solenoid 3 (S3) | — | W50 | — | 0.5 | MAXXECUGEN2R-MX3-30 | — | — | — |
| 4 | OD direct-clutch speed (NCO+) | — | W68 | — | 0.5 | MAXXECUGEN2R-MX4-28 | — | — | — |
| 5 | No.2 speed sensor (SP2+) | — | W65 | — | 0.5 | MAXXECUGEN2R-MX4-3 | — | — | — |
| 6 | A/T shift solenoid 4 (S4) | — | W51 | — | 0.5 | MAXXECUGEN2R-MX3-31 | — | — | — |
| 7 | A/T lock-up solenoid + (SLU+) | — | — | — | — | — | — | — | — |
| 8 | A/T accumulator solenoid + (SLN+) | — | — | — | — | — | — | — | — |
| 9 | A/T line-pressure solenoid + (SLT+) | — | — | — | — | — | — | — | — |
OEM-B77
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | A/C request (AC) | — | W73 | — | 0.5 | MAXXECUGEN2R-MX2-23 | — | — | — |
| 13 | A/C clutch relay (ACMG) | — | W45 | — | 0.5 | MAXXECUGEN2R-MX1-17 | — | — | — |
| 14 | A/T shift down (SFTD) | — | W74 | — | 0.5 | MAXXECUGEN2R-MX2-32 | — | — | — |
| 16 | A/T reverse indicator (R) | — | W75 | — | 0.5 | MAXXECUGEN2R-MX3-21 | — | — | — |
| 18 | Rear right wheel speed (RRO) | — | — | — | — | — | — | — | — |
| 19 | Rear left wheel speed (RLO) | — | — | — | — | — | — | — | — |
| 2 | Starter signal (STA) | — | W76 | — | 0.5 | MAXXECUGEN2R-MX3-22 | — | — | — |
| 20 | Tachometer output (TACH) | — | — | — | — | — | — | — | — |
| 21 | ABS active (ABS) | — | W77 | — | 0.5 | MAXXECUGEN2R-MX3-23 | — | — | — |
| 25 | No.1 speed sensor (SPD) | — | W63 | — | 0.5 | MAXXECUGEN2R-MX1-23 | — | — | — |
| 26 | Electrical load sense (ELS) | — | W78 | — | 0.5 | MAXXECUGEN2R-MX3-24 | — | — | — |
| 27 | Road speed (RSPD) | — | — | — | — | — | — | — | — |
| 4 | A/T shift up (SFTU) | — | W79 | — | 0.5 | MAXXECUGEN2R-MX3-25 | — | — | — |
| 5 | Diagnostic/timing check (TC) | — | W80 | — | 0.5 | MAXXECUGEN2R-MX3-26 | — | — | — |
| 6 | Stop light switch (STP) | — | W81 | — | 0.5 | MAXXECUGEN2R-MX3-27 | — | — | — |
| 7 | A/T manual position (3) | — | W82 | — | 0.5 | MAXXECUGEN2R-MX3-28 | — | — | — |
OEM-B78
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 10 | EFI main relay control (M-REL) | — | W46 | — | 0.5 | MAXXECUGEN2R-MX2-3 | — | — | — |
| 11 | Serial diagnostic (SIL) | — | — | — | — | — | — | — | — |
| 16 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | TRAC snow-mode light (SNOW) | — | — | — | — | — | — | — | — |
| 22 | Switch ground (EC) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | TRAC snow-mode switch (SNWI) | — | — | — | — | — | — | — | — |
| 4 | Fuel pump diagnostic (DI) | — | — | — | — | — | — | — | — |
| 5 | Fuel pump control (FPC) | — | — | — | — | — | — | — | — |
| 6 | Check-engine light (W) | — | — | — | — | — | — | — | — |
| 7 | ETCS-i power (+BM) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 8 | EFI main relay power (+B2) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Ignition switch (IGSW) | — | W34 | — | 0.5 | MAXXECUGEN2R-MX2-24 | — | — | — |
OEM-B79
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | TRAC enable light (IND) | — | — | — | — | — | — | — | — |
| 14 | TRAC active light (CIND) | — | — | — | — | — | — | — | — |
| 17 | A/T meter LCD (LPO3) | — | — | — | — | — | — | — | — |
| 18 | A/T meter LCD (SPTL) | — | — | — | — | — | — | — | — |
| 19 | Reverse buzzer (BZ) | — | — | — | — | — | — | — | — |
| 2 | TRAC off switch (MSW) | — | — | — | — | — | — | — | — |
| 3 | A/T meter LCD (LPO1) | — | — | — | — | — | — | — | — |
| 4 | A/T meter LCD (LPO2) | — | — | — | — | — | — | — | — |
| 7 | Front right wheel speed (FRO) | — | — | — | — | — | — | — | — |
| 8 | Front left wheel speed (FLO) | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | OEM-B74-22 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-B75-18 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-B75-19 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-B78-22 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | MAXXECUGEN2R-MX1-14 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-B78-16 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-B78-7 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-B78-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | MAXXECUGEN2R-MX1-25 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | MAXXECUGEN2R-MX2-25 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W6 | — | 0.85 | OEM-B74-21 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-B74-31 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-B74-9 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-B75-17 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | MAXXECUGEN2R-MX1-9 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | MAXXECUGEN2R-MX2-9 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | MAXXECUGEN2R-MX3-9 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W32 | — | 0.5 | OEM-B74-30 | — | — | — |
| 1 | — | — | W33 | — | 0.5 | MAXXECUGEN2R-MX1-11 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-B74-1 | Injector 3 (#30) | injector_out | MAXXECUGEN2R-MX1-33 | INJECTOR 3 | injector_out | single_source | |
| OEM-B74-10 | Cam position (G2) | trigger_in | MAXXECUGEN2R-MX1-18 | Digital/VR 2 SIGNAL + | trigger_in | single_source | |
| OEM-B74-11 | Ignition 1 (IGT, cyl 1&6) | ignition_out | MAXXECUGEN2R-MX1-1 | Ignition 1 | ignition_out | single_source | |
| OEM-B74-12 | Ignition 2 (IGT2, cyl 5&2) | ignition_out | MAXXECUGEN2R-MX1-2 | Ignition 2 | ignition_out | single_source | |
| OEM-B74-13 | Ignition 3 (IGT3, cyl 3&4) | ignition_out | MAXXECUGEN2R-MX1-3 | Ignition 3 | ignition_out | single_source | |
| OEM-B74-15 | Wastegate VSV (PMC) | low_side_out | MAXXECUGEN2R-MX3-32 | INJECTOR 10 | injector_out | single_source | |
| OEM-B74-17 | VVT-i OCV - (OCV-) | low_side_out | MAXXECUGEN2R-MX1-5 | GP out 1 (GND) | low_side_out | single_source | |
| OEM-B74-18 | VVT-i OCV + (OCV+) | low_side_out | MAXXECUGEN2R-MX1-6 | GP out 2 (GND) | low_side_out | single_source | |
| OEM-B74-19 | ETCS-i clutch - (CL-) | low_side_out | MAXXECUGEN2R-MX1-7 | GP out 3 (GND) | low_side_out | single_source | |
| OEM-B74-2 | Injector 4 (#40) | injector_out | MAXXECUGEN2R-MX1-34 | INJECTOR 4 | injector_out | single_source | |
| OEM-B74-20 | ETCS-i clutch + (CL+) | low_side_out | MAXXECUGEN2R-MX1-8 | GP out 4 (GND) | low_side_out | single_source | |
| OEM-B74-21 | Power ground (E01) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-B74-22 | Crank/cam sensor return (NE-) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-B74-23 | Crank position (NE+) | trigger_in | MAXXECUGEN2R-MX1-10 | Digital/VR 1 SIGNAL + | trigger_in | single_source | |
| OEM-B74-24 | Neutral/park switch (NSW) | digital_in | MAXXECUGEN2R-MX2-17 | AIN 13 | analog_in | single_source | |
| OEM-B74-25 | Igniter verification (IGF) | digital_in | MAXXECUGEN2R-MX4-6 | Digital/VR 6 SIGNAL + | digital_in | single_source | |
| OEM-B74-27 | Knock sensor 2 (KNK2, rear) | knock_in | MAXXECUGEN2R-MX2-31 | KNOCK 2+ | knock_in | single_source | |
| OEM-B74-28 | Knock sensor 1 (KNK1, front) | knock_in | MAXXECUGEN2R-MX2-28 | KNOCK 1+ | knock_in | single_source | |
| OEM-B74-3 | Injector 5 (#50) | injector_out | MAXXECUGEN2R-MX2-33 | INJECTOR 5 | injector_out | single_source | |
| OEM-B74-30 | ETCS-i motor shield (GEO1) | shield | MAXXECUGEN2R-MX1-11 | Digital/VR 1 SIGNAL - | shield | single_source | |
| OEM-B74-31 | Power ground (E02) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-B74-4 | Injector 6 (#60) | injector_out | MAXXECUGEN2R-MX2-34 | INJECTOR 6 | injector_out | single_source | |
| OEM-B74-5 | Intake air bypass VSV (VSV1) | low_side_out | MAXXECUGEN2R-MX3-33 | INJECTOR 11 | injector_out | single_source | |
| OEM-B74-7 | ETCS-i motor - (M-) | hbridge_out | — | — | — | single_source | |
| OEM-B74-8 | ETCS-i motor + (M+) | hbridge_out | — | — | — | single_source | |
| OEM-B74-9 | ETCS-i ground (ME01) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-B75-10 | Mass air flow (VG) | analog_in | MAXXECUGEN2R-MX2-5 | AIN 7 | analog_in | single_source | |
| OEM-B75-12 | O2 sensor (OX) | lambda_nb_in | MAXXECUGEN2R-MX2-6 | AIN 8 | analog_in | single_source | |
| OEM-B75-14 | Coolant temperature (THW) | temp_in | MAXXECUGEN2R-MX2-4 | AIN 6 | analog_in | single_source | |
| OEM-B75-15 | Accelerator pedal 1 (VPA) | analog_in | MAXXECUGEN2R-MX1-27 | AIN 2 | analog_in | single_source | |
| OEM-B75-16 | Accelerator pedal 2 (VPA2) | analog_in | MAXXECUGEN2R-MX1-29 | AIN 4 | analog_in | single_source | |
| OEM-B75-17 | Power ground (E1) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | single_source | |
| OEM-B75-18 | Sensor ground (E2) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-B75-19 | MAF ground (EVG) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-B75-2 | Sensor power (VC) | vref | MAXXECUGEN2R-MX1-12 | Digital/VR 1 POWER SUPPLY | vref | single_source | |
| OEM-B75-20 | A/T 2nd-gear indicator (2) | digital_in | MAXXECUGEN2R-MX2-16 | AIN 12 | analog_in | single_source | |
| OEM-B75-21 | A/T 1st-gear indicator (L) | digital_in | MAXXECUGEN2R-MX2-15 | AIN 11 | analog_in | single_source | |
| OEM-B75-22 | Intake air temperature (THA) | temp_in | MAXXECUGEN2R-MX2-13 | AIN 9 | analog_in | single_source | |
| OEM-B75-23 | Throttle position 1 (VTA) | analog_in | MAXXECUGEN2R-MX1-28 | AIN 3 | analog_in | single_source | |
| OEM-B75-24 | Throttle position 2 (VTA2) | analog_in | MAXXECUGEN2R-MX1-30 | AIN 5 | analog_in | single_source | |
| OEM-B75-3 | Exhaust gas control VSV (VSV2) | low_side_out | MAXXECUGEN2R-MX3-34 | INJECTOR 12 | injector_out | single_source | |
| OEM-B75-4 | O2 sensor heater (HT) | low_side_out | MAXXECUGEN2R-MX2-12 | GP OUT 7 / WBO2 Sensor 1 H- | low_side_out | single_source | |
| OEM-B75-5 | Injector 1 (#10) | injector_out | MAXXECUGEN2R-MX1-31 | INJECTOR 1 | injector_out | single_source | |
| OEM-B75-6 | Injector 2 (#20) | injector_out | MAXXECUGEN2R-MX1-32 | INJECTOR 2 | injector_out | single_source | |
| OEM-B75-7 | EVAP purge VSV (PRG) | low_side_out | MAXXECUGEN2R-MX4-31 | INJECTOR 13 | injector_out | single_source | |
| OEM-B75-8 | Main oil pressure switch (MOPS) | digital_in | MAXXECUGEN2R-MX2-22 | AIN 14 | analog_in | single_source | |
| OEM-B75-9 | Manifold pressure (PIM) | analog_in | MAXXECUGEN2R-MX1-26 | AIN 1 | analog_in | single_source | |
| OEM-B76-1 | A/T shift solenoid 1 (S1) | low_side_out | MAXXECUGEN2R-MX3-12 | GP Out 8 (GND) / WBO2 Sensor 2 H- | low_side_out | single_source | |
| OEM-B76-10 | OD direct-clutch speed (NCO-) | digital_in | MAXXECUGEN2R-MX4-9 | Digital/VR 7 SIGNAL + | digital_in | single_source | |
| OEM-B76-11 | No.2 speed sensor return (SP2-) | digital_in | MAXXECUGEN2R-MX1-24 | Digital/VR 4 SIGNAL + | digital_in | single_source | |
| OEM-B76-12 | Exhaust bypass VSV (VSV3) | low_side_out | MAXXECUGEN2R-MX4-32 | INJECTOR 14 | injector_out | single_source | |
| OEM-B76-13 | A/T lock-up solenoid - (SLU-) | low_side_out | MAXXECUGEN2R-MX4-33 | INJECTOR 15 | injector_out | single_source | |
| OEM-B76-14 | A/T accumulator solenoid - (SLN-) | low_side_out | MAXXECUGEN2R-MX4-34 | INJECTOR 16 | injector_out | single_source | |
| OEM-B76-15 | A/T line-pressure solenoid - (SLT-) | low_side_out | — | — | — | single_source | |
| OEM-B76-16 | Fuel pressure-up VSV (FPU) | low_side_out | — | — | — | single_source | |
| OEM-B76-17 | A/T oil temperature (OIL) | temp_in | MAXXECUGEN2R-MX2-14 | AIN 10 | analog_in | single_source | |
| OEM-B76-2 | A/T shift solenoid 2 (S2) | low_side_out | MAXXECUGEN2R-MX3-29 | INJECTOR 7 | injector_out | single_source | |
| OEM-B76-3 | A/T shift solenoid 3 (S3) | low_side_out | MAXXECUGEN2R-MX3-30 | INJECTOR 8 | injector_out | single_source | |
| OEM-B76-4 | OD direct-clutch speed (NCO+) | digital_in | MAXXECUGEN2R-MX4-28 | Digital/VR 8 SIGNAL + | digital_in | single_source | |
| OEM-B76-5 | No.2 speed sensor (SP2+) | digital_in | MAXXECUGEN2R-MX4-3 | Digital/VR 5 SIGNAL + | digital_in | single_source | |
| OEM-B76-6 | A/T shift solenoid 4 (S4) | low_side_out | MAXXECUGEN2R-MX3-31 | INJECTOR 9 | injector_out | single_source | |
| OEM-B76-7 | A/T lock-up solenoid + (SLU+) | low_side_out | — | — | — | single_source | |
| OEM-B76-8 | A/T accumulator solenoid + (SLN+) | low_side_out | — | — | — | single_source | |
| OEM-B76-9 | A/T line-pressure solenoid + (SLT+) | low_side_out | — | — | — | single_source | |
| OEM-B77-1 | A/C request (AC) | digital_in | MAXXECUGEN2R-MX2-23 | AIN 15 | analog_in | single_source | |
| OEM-B77-13 | A/C clutch relay (ACMG) | low_side_out | MAXXECUGEN2R-MX1-17 | GP out 5 (GND) | low_side_out | single_source | |
| OEM-B77-14 | A/T shift down (SFTD) | digital_in | MAXXECUGEN2R-MX2-32 | AIN 16 | analog_in | single_source | |
| OEM-B77-16 | A/T reverse indicator (R) | digital_in | MAXXECUGEN2R-MX3-21 | AIN 17 | analog_in | single_source | |
| OEM-B77-18 | Rear right wheel speed (RRO) | digital_in | — | — | — | single_source | |
| OEM-B77-19 | Rear left wheel speed (RLO) | digital_in | — | — | — | single_source | |
| OEM-B77-2 | Starter signal (STA) | digital_in | MAXXECUGEN2R-MX3-22 | AIN 18 | analog_in | single_source | |
| OEM-B77-20 | Tachometer output (TACH) | tacho_out | — | — | — | single_source | |
| OEM-B77-21 | ABS active (ABS) | digital_in | MAXXECUGEN2R-MX3-23 | AIN 19 | analog_in | single_source | |
| OEM-B77-25 | No.1 speed sensor (SPD) | digital_in | MAXXECUGEN2R-MX1-23 | Digital/VR 3 SIGNAL + | digital_in | single_source | |
| OEM-B77-26 | Electrical load sense (ELS) | digital_in | MAXXECUGEN2R-MX3-24 | AIN 20 | analog_in | single_source | |
| OEM-B77-27 | Road speed (RSPD) | digital_in | — | — | — | single_source | |
| OEM-B77-4 | A/T shift up (SFTU) | digital_in | MAXXECUGEN2R-MX3-25 | AIN 21 | analog_in | single_source | |
| OEM-B77-5 | Diagnostic/timing check (TC) | digital_in | MAXXECUGEN2R-MX3-26 | AIN 22 | analog_in | single_source | |
| OEM-B77-6 | Stop light switch (STP) | digital_in | MAXXECUGEN2R-MX3-27 | AIN 23 | analog_in | single_source | |
| OEM-B77-7 | A/T manual position (3) | digital_in | MAXXECUGEN2R-MX3-28 | AIN 24 | analog_in | single_source | |
| OEM-B78-1 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-B78-10 | EFI main relay control (M-REL) | low_side_out | MAXXECUGEN2R-MX2-3 | GP out 6 (GND) | low_side_out | single_source | |
| OEM-B78-11 | Serial diagnostic (SIL) | serial | — | — | — | single_source | |
| OEM-B78-16 | EFI main relay power (+B) | power_in | MAXXECUGEN2R-MX1-25 + MAXXECUGEN2R-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | single_source | |
| OEM-B78-2 | TRAC snow-mode light (SNOW) | low_side_out | — | — | — | single_source | |
| OEM-B78-22 | Switch ground (EC) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | single_source | |
| OEM-B78-3 | TRAC snow-mode switch (SNWI) | digital_in | — | — | — | single_source | |
| OEM-B78-4 | Fuel pump diagnostic (DI) | digital_in | — | — | — | single_source | |
| OEM-B78-5 | Fuel pump control (FPC) | low_side_out | — | — | — | single_source | |
| OEM-B78-6 | Check-engine light (W) | low_side_out | — | — | — | single_source | |
| OEM-B78-7 | ETCS-i power (+BM) | power_in | MAXXECUGEN2R-MX1-25 + MAXXECUGEN2R-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | single_source | |
| OEM-B78-8 | EFI main relay power (+B2) | power_in | MAXXECUGEN2R-MX1-25 + MAXXECUGEN2R-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | single_source | |
| OEM-B78-9 | Ignition switch (IGSW) | digital_in | MAXXECUGEN2R-MX2-24 | 12V supply 3 | digital_in | single_source | |
| OEM-B79-1 | TRAC enable light (IND) | low_side_out | — | — | — | single_source | |
| OEM-B79-14 | TRAC active light (CIND) | low_side_out | — | — | — | single_source | |
| OEM-B79-17 | A/T meter LCD (LPO3) | low_side_out | — | — | — | single_source | |
| OEM-B79-18 | A/T meter LCD (SPTL) | low_side_out | — | — | — | single_source | |
| OEM-B79-19 | Reverse buzzer (BZ) | low_side_out | — | — | — | single_source | |
| OEM-B79-2 | TRAC off switch (MSW) | digital_in | — | — | — | single_source | |
| OEM-B79-3 | A/T meter LCD (LPO1) | low_side_out | — | — | — | single_source | |
| OEM-B79-4 | A/T meter LCD (LPO2) | low_side_out | — | — | — | single_source | |
| OEM-B79-7 | Front right wheel speed (FRO) | digital_in | — | — | — | single_source | |
| OEM-B79-8 | Front left wheel speed (FLO) | digital_in | — | — | — | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-B78-16 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-B78-7 | SP-14V-1 | 0.85 | no route | ETCS-i power (+BM) | — | |
| W3 | OEM-B78-8 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B2) | — | |
| W4 | SP-14V-1 | MAXXECUGEN2R-MX1-25 | 0.85 | no route | 12V supply 1 | — | |
| W5 | SP-14V-1 | MAXXECUGEN2R-MX2-25 | 0.85 | no route | 12V supply 2 | — | |
| W6 | OEM-B74-21 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W7 | OEM-B74-31 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W8 | OEM-B74-9 | SP-GND-1 | 0.85 | no route | ETCS-i ground (ME01) | — | |
| W9 | OEM-B75-17 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W10 | SP-GND-1 | MAXXECUGEN2R-MX1-9 | 0.85 | no route | Engine gnd | — | |
| W11 | SP-GND-1 | MAXXECUGEN2R-MX2-9 | 0.85 | no route | Engine gnd | — | |
| W12 | SP-GND-1 | MAXXECUGEN2R-MX3-9 | 0.85 | no route | Engine gnd | — | |
| W13 | OEM-B74-22 | SP-0V-1 | 0.5 | no route | Crank/cam sensor return (NE-) | — | |
| W14 | OEM-B75-18 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W15 | OEM-B75-19 | SP-0V-1 | 0.5 | no route | MAF ground (EVG) | — | |
| W16 | OEM-B78-22 | SP-0V-1 | 0.5 | no route | Switch ground (EC) | — | |
| W17 | SP-0V-1 | MAXXECUGEN2R-MX1-14 | 0.5 | no route | SENSOR GND | — | |
| W18 | OEM-B75-2 | MAXXECUGEN2R-MX1-12 | 0.5 | no route | Sensor power (VC) | — | |
| W19 | OEM-B74-23 | MAXXECUGEN2R-MX1-10 | 0.5 | no route | Crank position (NE+) | — | |
| W20 | OEM-B74-10 | MAXXECUGEN2R-MX1-18 | 0.5 | no route | Cam position (G2) | — | |
| W21 | OEM-B74-28 | MAXXECUGEN2R-MX2-28 | 0.5 | no route | Knock sensor 1 (KNK1, front) | — | |
| W22 | OEM-B74-27 | MAXXECUGEN2R-MX2-31 | 0.5 | no route | Knock sensor 2 (KNK2, rear) | — | |
| W23 | OEM-B74-11 | MAXXECUGEN2R-MX1-1 | 0.5 | no route | Ignition 1 (IGT, cyl 1&6) | — | |
| W24 | OEM-B74-12 | MAXXECUGEN2R-MX1-2 | 0.5 | no route | Ignition 2 (IGT2, cyl 5&2) | — | |
| W25 | OEM-B74-13 | MAXXECUGEN2R-MX1-3 | 0.5 | no route | Ignition 3 (IGT3, cyl 3&4) | — | |
| W26 | OEM-B75-5 | MAXXECUGEN2R-MX1-31 | 0.5 | no route | Injector 1 (#10) | — | |
| W27 | OEM-B75-6 | MAXXECUGEN2R-MX1-32 | 0.5 | no route | Injector 2 (#20) | — | |
| W28 | OEM-B74-1 | MAXXECUGEN2R-MX1-33 | 0.5 | no route | Injector 3 (#30) | — | |
| W29 | OEM-B74-2 | MAXXECUGEN2R-MX1-34 | 0.5 | no route | Injector 4 (#40) | — | |
| W30 | OEM-B74-3 | MAXXECUGEN2R-MX2-33 | 0.5 | no route | Injector 5 (#50) | — | |
| W31 | OEM-B74-4 | MAXXECUGEN2R-MX2-34 | 0.5 | no route | Injector 6 (#60) | — | |
| W32 | OEM-B74-30 | SP-SHD-1 | 0.5 | no route | ETCS-i motor shield (GEO1) | — | |
| W33 | SP-SHD-1 | MAXXECUGEN2R-MX1-11 | 0.5 | no route | Digital/VR 1 SIGNAL - | — | |
| W34 | OEM-B78-9 | MAXXECUGEN2R-MX2-24 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W35 | OEM-B74-17 | MAXXECUGEN2R-MX1-5 | 0.5 | no route | VVT-i OCV - (OCV-) | — | |
| W36 | OEM-B74-18 | MAXXECUGEN2R-MX1-6 | 0.5 | no route | VVT-i OCV + (OCV+) | — | |
| W37 | OEM-B74-19 | MAXXECUGEN2R-MX1-7 | 0.5 | no route | ETCS-i clutch - (CL-) | — | |
| W38 | OEM-B74-20 | MAXXECUGEN2R-MX1-8 | 0.5 | no route | ETCS-i clutch + (CL+) | — | |
| W39 | OEM-B75-9 | MAXXECUGEN2R-MX1-26 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W40 | OEM-B75-15 | MAXXECUGEN2R-MX1-27 | 0.5 | no route | Accelerator pedal 1 (VPA) | — | |
| W41 | OEM-B75-23 | MAXXECUGEN2R-MX1-28 | 0.5 | no route | Throttle position 1 (VTA) | — | |
| W42 | OEM-B75-16 | MAXXECUGEN2R-MX1-29 | 0.5 | no route | Accelerator pedal 2 (VPA2) | — | |
| W43 | OEM-B75-24 | MAXXECUGEN2R-MX1-30 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W44 | OEM-B75-14 | MAXXECUGEN2R-MX2-4 | 0.5 | no route | Coolant temperature (THW) | — | |
| W45 | OEM-B77-13 | MAXXECUGEN2R-MX1-17 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W46 | OEM-B78-10 | MAXXECUGEN2R-MX2-3 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W47 | OEM-B75-4 | MAXXECUGEN2R-MX2-12 | 0.5 | no route | O2 sensor heater (HT) | — | |
| W48 | OEM-B76-1 | MAXXECUGEN2R-MX3-12 | 0.5 | no route | A/T shift solenoid 1 (S1) | — | |
| W49 | OEM-B76-2 | MAXXECUGEN2R-MX3-29 | 0.5 | no route | A/T shift solenoid 2 (S2) | — | |
| W50 | OEM-B76-3 | MAXXECUGEN2R-MX3-30 | 0.5 | no route | A/T shift solenoid 3 (S3) | — | |
| W51 | OEM-B76-6 | MAXXECUGEN2R-MX3-31 | 0.5 | no route | A/T shift solenoid 4 (S4) | — | |
| W52 | OEM-B74-15 | MAXXECUGEN2R-MX3-32 | 0.5 | no route | Wastegate VSV (PMC) | — | |
| W53 | OEM-B74-5 | MAXXECUGEN2R-MX3-33 | 0.5 | no route | Intake air bypass VSV (VSV1) | — | |
| W54 | OEM-B75-3 | MAXXECUGEN2R-MX3-34 | 0.5 | no route | Exhaust gas control VSV (VSV2) | — | |
| W55 | OEM-B75-7 | MAXXECUGEN2R-MX4-31 | 0.5 | no route | EVAP purge VSV (PRG) | — | |
| W56 | OEM-B76-12 | MAXXECUGEN2R-MX4-32 | 0.5 | no route | Exhaust bypass VSV (VSV3) | — | |
| W57 | OEM-B76-13 | MAXXECUGEN2R-MX4-33 | 0.5 | no route | A/T lock-up solenoid - (SLU-) | — | |
| W58 | OEM-B76-14 | MAXXECUGEN2R-MX4-34 | 0.5 | no route | A/T accumulator solenoid - (SLN-) | — | |
| W59 | OEM-B75-10 | MAXXECUGEN2R-MX2-5 | 0.5 | no route | Mass air flow (VG) | — | |
| W60 | OEM-B75-12 | MAXXECUGEN2R-MX2-6 | 0.5 | no route | O2 sensor (OX) | — | |
| W61 | OEM-B75-22 | MAXXECUGEN2R-MX2-13 | 0.5 | no route | Intake air temperature (THA) | — | |
| W62 | OEM-B76-17 | MAXXECUGEN2R-MX2-14 | 0.5 | no route | A/T oil temperature (OIL) | — | |
| W63 | OEM-B77-25 | MAXXECUGEN2R-MX1-23 | 0.5 | no route | No.1 speed sensor (SPD) | — | |
| W64 | OEM-B76-11 | MAXXECUGEN2R-MX1-24 | 0.5 | no route | No.2 speed sensor return (SP2-) | — | |
| W65 | OEM-B76-5 | MAXXECUGEN2R-MX4-3 | 0.5 | no route | No.2 speed sensor (SP2+) | — | |
| W66 | OEM-B74-25 | MAXXECUGEN2R-MX4-6 | 0.5 | no route | Igniter verification (IGF) | — | |
| W67 | OEM-B76-10 | MAXXECUGEN2R-MX4-9 | 0.5 | no route | OD direct-clutch speed (NCO-) | — | |
| W68 | OEM-B76-4 | MAXXECUGEN2R-MX4-28 | 0.5 | no route | OD direct-clutch speed (NCO+) | — | |
| W69 | OEM-B75-21 | MAXXECUGEN2R-MX2-15 | 0.5 | no route | A/T 1st-gear indicator (L) | — | |
| W70 | OEM-B75-20 | MAXXECUGEN2R-MX2-16 | 0.5 | no route | A/T 2nd-gear indicator (2) | — | |
| W71 | OEM-B74-24 | MAXXECUGEN2R-MX2-17 | 0.5 | no route | Neutral/park switch (NSW) | — | |
| W72 | OEM-B75-8 | MAXXECUGEN2R-MX2-22 | 0.5 | no route | Main oil pressure switch (MOPS) | — | |
| W73 | OEM-B77-1 | MAXXECUGEN2R-MX2-23 | 0.5 | no route | A/C request (AC) | — | |
| W74 | OEM-B77-14 | MAXXECUGEN2R-MX2-32 | 0.5 | no route | A/T shift down (SFTD) | — | |
| W75 | OEM-B77-16 | MAXXECUGEN2R-MX3-21 | 0.5 | no route | A/T reverse indicator (R) | — | |
| W76 | OEM-B77-2 | MAXXECUGEN2R-MX3-22 | 0.5 | no route | Starter signal (STA) | — | |
| W77 | OEM-B77-21 | MAXXECUGEN2R-MX3-23 | 0.5 | no route | ABS active (ABS) | — | |
| W78 | OEM-B77-26 | MAXXECUGEN2R-MX3-24 | 0.5 | no route | Electrical load sense (ELS) | — | |
| W79 | OEM-B77-4 | MAXXECUGEN2R-MX3-25 | 0.5 | no route | A/T shift up (SFTU) | — | |
| W80 | OEM-B77-5 | MAXXECUGEN2R-MX3-26 | 0.5 | no route | Diagnostic/timing check (TC) | — | |
| W81 | OEM-B77-6 | MAXXECUGEN2R-MX3-27 | 0.5 | no route | Stop light switch (STP) | — | |
| W82 | OEM-B77-7 | MAXXECUGEN2R-MX3-28 | 0.5 | no route | A/T manual position (3) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (31)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-B74-7 | Required OEM function "ETCS-i motor - (M-)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-B74-8 | Required OEM function "ETCS-i motor + (M+)" (hbridge_out) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-B74-24 ↔ MAXXECUGEN2R-MX2-17 | OEM-B74-24 "Neutral/park switch (NSW)" [digital_in] is wired to MAXXECUGEN2R-MX2-17 "AIN 13" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B75-20 ↔ MAXXECUGEN2R-MX2-16 | OEM-B75-20 "A/T 2nd-gear indicator (2)" [digital_in] is wired to MAXXECUGEN2R-MX2-16 "AIN 12" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B75-21 ↔ MAXXECUGEN2R-MX2-15 | OEM-B75-21 "A/T 1st-gear indicator (L)" [digital_in] is wired to MAXXECUGEN2R-MX2-15 "AIN 11" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B75-8 ↔ MAXXECUGEN2R-MX2-22 | OEM-B75-8 "Main oil pressure switch (MOPS)" [digital_in] is wired to MAXXECUGEN2R-MX2-22 "AIN 14" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-1 ↔ MAXXECUGEN2R-MX2-23 | OEM-B77-1 "A/C request (AC)" [digital_in] is wired to MAXXECUGEN2R-MX2-23 "AIN 15" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-14 ↔ MAXXECUGEN2R-MX2-32 | OEM-B77-14 "A/T shift down (SFTD)" [digital_in] is wired to MAXXECUGEN2R-MX2-32 "AIN 16" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-16 ↔ MAXXECUGEN2R-MX3-21 | OEM-B77-16 "A/T reverse indicator (R)" [digital_in] is wired to MAXXECUGEN2R-MX3-21 "AIN 17" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-2 ↔ MAXXECUGEN2R-MX3-22 | OEM-B77-2 "Starter signal (STA)" [digital_in] is wired to MAXXECUGEN2R-MX3-22 "AIN 18" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-21 ↔ MAXXECUGEN2R-MX3-23 | OEM-B77-21 "ABS active (ABS)" [digital_in] is wired to MAXXECUGEN2R-MX3-23 "AIN 19" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-26 ↔ MAXXECUGEN2R-MX3-24 | OEM-B77-26 "Electrical load sense (ELS)" [digital_in] is wired to MAXXECUGEN2R-MX3-24 "AIN 20" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-4 ↔ MAXXECUGEN2R-MX3-25 | OEM-B77-4 "A/T shift up (SFTU)" [digital_in] is wired to MAXXECUGEN2R-MX3-25 "AIN 21" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-5 ↔ MAXXECUGEN2R-MX3-26 | OEM-B77-5 "Diagnostic/timing check (TC)" [digital_in] is wired to MAXXECUGEN2R-MX3-26 "AIN 22" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-6 ↔ MAXXECUGEN2R-MX3-27 | OEM-B77-6 "Stop light switch (STP)" [digital_in] is wired to MAXXECUGEN2R-MX3-27 "AIN 23" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NET_FAMILY | OEM-B77-7 ↔ MAXXECUGEN2R-MX3-28 | OEM-B77-7 "A/T manual position (3)" [digital_in] is wired to MAXXECUGEN2R-MX3-28 "AIN 24" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| warn | NO_FUEL_PUMP | fuel pump | This engine harness has no fuel-pump control path: no fuel-pump relay output is wired to the new ECU. If the stock car switches the pump outside the ECU (an airflow-meter contact or a separate module), the standalone must drive the pump relay itself — see the install notes for this car. |
| info | NET_FAMILY | OEM-B74-15 ↔ MAXXECUGEN2R-MX3-32 | OEM-B74-15 "Wastegate VSV (PMC)" [low_side_out] is wired to MAXXECUGEN2R-MX3-32 "INJECTOR 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B74-5 ↔ MAXXECUGEN2R-MX3-33 | OEM-B74-5 "Intake air bypass VSV (VSV1)" [low_side_out] is wired to MAXXECUGEN2R-MX3-33 "INJECTOR 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B75-14 ↔ MAXXECUGEN2R-MX2-4 | OEM-B75-14 "Coolant temperature (THW)" [temp_in] is wired to MAXXECUGEN2R-MX2-4 "AIN 6" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-B75-22 ↔ MAXXECUGEN2R-MX2-13 | OEM-B75-22 "Intake air temperature (THA)" [temp_in] is wired to MAXXECUGEN2R-MX2-13 "AIN 9" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-B75-3 ↔ MAXXECUGEN2R-MX3-34 | OEM-B75-3 "Exhaust gas control VSV (VSV2)" [low_side_out] is wired to MAXXECUGEN2R-MX3-34 "INJECTOR 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B75-7 ↔ MAXXECUGEN2R-MX4-31 | OEM-B75-7 "EVAP purge VSV (PRG)" [low_side_out] is wired to MAXXECUGEN2R-MX4-31 "INJECTOR 13" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B76-12 ↔ MAXXECUGEN2R-MX4-32 | OEM-B76-12 "Exhaust bypass VSV (VSV3)" [low_side_out] is wired to MAXXECUGEN2R-MX4-32 "INJECTOR 14" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B76-13 ↔ MAXXECUGEN2R-MX4-33 | OEM-B76-13 "A/T lock-up solenoid - (SLU-)" [low_side_out] is wired to MAXXECUGEN2R-MX4-33 "INJECTOR 15" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B76-14 ↔ MAXXECUGEN2R-MX4-34 | OEM-B76-14 "A/T accumulator solenoid - (SLN-)" [low_side_out] is wired to MAXXECUGEN2R-MX4-34 "INJECTOR 16" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B76-17 ↔ MAXXECUGEN2R-MX2-14 | OEM-B76-17 "A/T oil temperature (OIL)" [temp_in] is wired to MAXXECUGEN2R-MX2-14 "AIN 10" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-B76-2 ↔ MAXXECUGEN2R-MX3-29 | OEM-B76-2 "A/T shift solenoid 2 (S2)" [low_side_out] is wired to MAXXECUGEN2R-MX3-29 "INJECTOR 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B76-3 ↔ MAXXECUGEN2R-MX3-30 | OEM-B76-3 "A/T shift solenoid 3 (S3)" [low_side_out] is wired to MAXXECUGEN2R-MX3-30 "INJECTOR 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B76-6 ↔ MAXXECUGEN2R-MX3-31 | OEM-B76-6 "A/T shift solenoid 4 (S4)" [low_side_out] is wired to MAXXECUGEN2R-MX3-31 "INJECTOR 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 25 optional OEM pins are not mapped: OEM-B76-15 A/T line-pressure solenoid - (SLT-); OEM-B76-16 Fuel pressure-up VSV (FPU); OEM-B76-7 A/T lock-up solenoid + (SLU+); OEM-B76-8 A/T accumulator solenoid + (SLN+); OEM-B76-9 A/T line-pressure solenoid + (SLT+); OEM-B77-18 Rear right wheel speed (RRO); OEM-B77-19 Rear left wheel speed (RLO); OEM-B77-20 Tachometer output (TACH); OEM-B77-27 Road speed (RSPD); OEM-B78-11 Serial diagnostic (SIL); OEM-B78-2 TRAC snow-mode light (SNOW); OEM-B78-3 TRAC snow-mode switch (SNWI); OEM-B78-4 Fuel pump diagnostic (DI); OEM-B78-5 Fuel pump control (FPC); OEM-B78-6 Check-engine light (W); OEM-B79-1 TRAC enable light (IND); OEM-B79-14 TRAC active light (CIND); OEM-B79-17 A/T meter LCD (LPO3); OEM-B79-18 A/T meter LCD (SPTL); OEM-B79-19 Reverse buzzer (BZ); OEM-B79-2 TRAC off switch (MSW); OEM-B79-3 A/T meter LCD (LPO1); OEM-B79-4 A/T meter LCD (LPO2); OEM-B79-7 Front right wheel speed (FRO); OEM-B79-8 Front left wheel speed (FLO) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-B78-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-B74 7: ETCS-i motor - (M-): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-B74 8: ETCS-i motor + (M+): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand Not wired: - OEM-B78 1: Battery constant (BATT): MaxxECU MaxxECU GEN2 RACE has no battery-constant input; not needed - OEM-B76 15: A/T line-pressure solenoid - (SLT-): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B76 16: Fuel pressure-up VSV (FPU): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B76 7: A/T lock-up solenoid + (SLU+): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B76 8: A/T accumulator solenoid + (SLN+): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B76 9: A/T line-pressure solenoid + (SLT+): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B78 2: TRAC snow-mode light (SNOW): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B78 5: Fuel pump control (FPC): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B78 6: Check-engine light (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B79 1: TRAC enable light (IND): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B79 14: TRAC active light (CIND): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B79 17: A/T meter LCD (LPO3): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B79 18: A/T meter LCD (SPTL): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B79 19: Reverse buzzer (BZ): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B79 3: A/T meter LCD (LPO1): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B79 4: A/T meter LCD (LPO2): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU GEN2 RACE - OEM-B77 20: Tachometer output (TACH): no free tacho/frequency_out/low_side/ls_hs on MaxxECU MaxxECU GEN2 RACE - OEM-B77 18: Rear right wheel speed (RRO): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-B77 19: Rear left wheel speed (RLO): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-B77 27: Road speed (RSPD): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-B78 4: Fuel pump diagnostic (DI): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-B79 7: Front right wheel speed (FRO): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-B79 8: Front left wheel speed (FLO): no free frequency_in/switch_in on MaxxECU MaxxECU GEN2 RACE - OEM-B78 3: TRAC snow-mode switch (SNWI): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU GEN2 RACE - OEM-B79 2: TRAC off switch (MSW): no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU GEN2 RACE - OEM-B78 11: Serial diagnostic (SIL): no free k_line on MaxxECU MaxxECU GEN2 RACE
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | MaxxECU GEN2 pinout (RACE MX1–MX4 / TRACK MX1–MX3) | http://www.maxxecu.com/webhelp/wirings-maxxecu_gen2_pinout.html | archive | 2026-10-05 | f689b8b6b08f |
| 3 | community_copy | wilbo666: 2JZ-GTE VVTi JZA80 Supra Engine Wiring (ECU pinout, B74-B79) | http://wilbo666.pbworks.com/w/page/57949268/2JZ-GTE%20VVTi%20JZA80%20Supra%20Engine%20Wiring | — | — | — |