← Back

VW Corrado VR6 12v (AAA) Motronic M2.9 OBD1 → Motorsport Electronics ME360 (auto)

VW Corrado VR6 12v (AAA) Motronic M2.9 OBD1 — Motorsport Electronics — ME360
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12

Before you start

Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.

Statusdraft · not yet verified: nobody has reported building and running this harness
Open errors1: read the Findings page before cutting any wire
Size of the job47 wires · 5 connectors · 0 part lines
ToolsCrimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink
Order of work1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up.

Build checklist

Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.

WireFromToGaugeColourCutLabelCrimp ACrimp BPin APin BContinuity
W1OEM-A-23SP-14V-10.85☐☐☐☐☐☐☐
W2SP-14V-1ME360-C1-150.85☐☐☐☐☐☐☐
W3SP-14V-1ME360-C1-640.85☐☐☐☐☐☐☐
W4OEM-A-1SP-GND-10.85☐☐☐☐☐☐☐
W5OEM-A-10SP-GND-10.85☐☐☐☐☐☐☐
W6OEM-A-55SP-GND-10.85☐☐☐☐☐☐☐
W7OEM-A-56SP-GND-10.85☐☐☐☐☐☐☐
W8OEM-A-7SP-GND-10.85☐☐☐☐☐☐☐
W9SP-GND-1ME360-C1-100.85☐☐☐☐☐☐☐
W10SP-GND-1ME360-C1-610.85☐☐☐☐☐☐☐
W11SP-GND-1ME360-C1-890.85☐☐☐☐☐☐☐
W12SP-GND-1ME360-C1-900.85☐☐☐☐☐☐☐
W13OEM-A-16SP-0V-10.5☐☐☐☐☐☐☐
W14OEM-A-33SP-0V-10.5☐☐☐☐☐☐☐
W15OEM-A-67SP-0V-10.5☐☐☐☐☐☐☐
W16SP-0V-1ME360-C1-520.5☐☐☐☐☐☐☐
W17SP-0V-1ME360-C1-840.5☐☐☐☐☐☐☐
W18OEM-A-41ME360-C1-450.5☐☐☐☐☐☐☐
W19OEM-A-68ME360-C1-800.5☐☐☐☐☐☐☐
W20OEM-A-44ME360-C1-220.5☐☐☐☐☐☐☐
W21OEM-A-34ME360-C1-530.5☐☐☐☐☐☐☐
W22OEM-A-8ME360-C1-320.5☐☐☐☐☐☐☐
W23OEM-A-60ME360-C1-310.5☐☐☐☐☐☐☐
W24OEM-A-52ME360-C1-20.5☐☐☐☐☐☐☐
W25OEM-A-24ME360-C1-630.5☐☐☐☐☐☐☐
W26OEM-A-3ME360-C1-40.5☐☐☐☐☐☐☐
W27OEM-A-26ME360-C1-330.5☐☐☐☐☐☐☐
W28OEM-A-4ME360-C1-30.5☐☐☐☐☐☐☐
W29OEM-A-25ME360-C1-280.5☐☐☐☐☐☐☐
W30OEM-A-2ME360-C1-580.5☐☐☐☐☐☐☐
W31OEM-A-17ME360-C1-260.5☐☐☐☐☐☐☐
W32OEM-A-40ME360-C1-560.5☐☐☐☐☐☐☐
W33OEM-A-14ME360-C1-860.5☐☐☐☐☐☐☐
W34OEM-A-49ME360-C1-730.5☐☐☐☐☐☐☐
W35OEM-A-6ME360-C1-120.5☐☐☐☐☐☐☐
W36OEM-A-9ME360-C1-740.5☐☐☐☐☐☐☐
W37OEM-A-27ME360-C1-440.5☐☐☐☐☐☐☐
W38OEM-A-31ME360-C1-690.5☐☐☐☐☐☐☐
W39OEM-A-5ME360-C1-390.5☐☐☐☐☐☐☐
W40OEM-A-53ME360-C1-370.5☐☐☐☐☐☐☐
W41OEM-A-22ME360-C1-790.5☐☐☐☐☐☐☐
W42OEM-A-20ME360-C1-170.5☐☐☐☐☐☐☐
W43OEM-A-15ME360-C1-570.5☐☐☐☐☐☐☐
W44OEM-A-36ME360-C1-770.5☐☐☐☐☐☐☐
W45OEM-A-65ME360-C1-60.5☐☐☐☐☐☐☐
W46OEM-A-37ME360-C1-70.5☐☐☐☐☐☐☐
W47OEM-A-39ME360-C1-80.5☐☐☐☐☐☐☐

Bench test (before first power-up)

Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).

#Probe AProbe BExpectWhyReading
1ME360-C1-10ME360-C1-15open (OL)power ground must not touch +12 V supply
2ME360-C1-10ME360-C1-45open (OL)power ground must not touch 5 V sensor reference
3ME360-C1-15ME360-C1-45open (OL)+12 V supply must not touch 5 V sensor reference
4ME360-C1-52ME360-C1-15open (OL)sensor ground must not touch +12 V supply
5ME360-C1-52ME360-C1-45open (OL)sensor ground must not touch 5 V sensor reference

If any reading doesn't match, stop and get help before powering up.

Revisions

RevLabelByDate
No revisions yet.

Schematic

ME360-C1OEM-ASP-0VSP-14VSP-GND

Connectors

ME360-C1

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1COIL 4————————
10GROUND CHASSIS—W9—0.85SP-GND-1———
11EGT 1————————
12LOW SIDE 2—W35—0.5OEM-A-6———
13LOW SIDE RELAY 15————————
14LSU +12V————————
15IGN +12V—W2—0.85SP-14V-1———
16LSU HEATER -VE————————
17ANA VOLT 3—W42—0.5OEM-A-20———
18ANA VOLT 4————————
19LSU UN————————
2COIL 3—W24—0.5OEM-A-52———
20LSU VM————————
21CAN 1 HIGH————————
22CAM A VR+—W20—0.5OEM-A-44———
23CAM A VR-————————
24SERIAL 1 GROUND————————
25SERIAL 1 TX————————
26ANA VOLT 1—W31—0.5OEM-A-17———
28INJECTOR 5—W29—0.5OEM-A-25———
3INJECTOR 4—W28—0.5OEM-A-4———
31COIL 2—W23—0.5OEM-A-60———
32COIL 1—W22—0.5OEM-A-8———
33INJECTOR 3—W27—0.5OEM-A-26———
34DIG_IN 6————————
35USB D+————————
36USB D-————————
37LOW SIDE RELAY 11—W40—0.5OEM-A-53———
38USB VBUS————————
39LOW SIDE 6—W39—0.5OEM-A-5———
4INJECTOR 2—W26—0.5OEM-A-3———
40LOW SIDE RELAY 17————————
41USB GROUND————————
42LOW SIDE RELAY 12————————
43LOW SIDE RELAY 14————————
44LOW SIDE 4—W37—0.5OEM-A-27———
455V REF—W18—0.5OEM-A-41———
465V REF————————
49LSU IA————————
5DIG_IN 4————————
50LSU IP————————
51CAN 1 LOW————————
52SENSORS GROUND—W16—0.5SP-0V-1———
53KNOCK 1 SIGNAL—W21—0.5OEM-A-34———
55SERIAL 1 RX————————
56ANA VOLT 2—W32—0.5OEM-A-40———
57ANA TEMP 2—W43—0.5OEM-A-15———
58INJECTOR 6—W30—0.5OEM-A-2———
59COIL 5————————
6DIG_IN 1—W45—0.5OEM-A-65———
60COIL 6————————
61GROUND—W10—0.85SP-GND-1———
62DIG_IN 5————————
63INJECTOR 1—W25—0.5OEM-A-24———
64VBAT—W3—0.85SP-14V-1———
65H-BRIDGE A OUT 1————————
66H-BRIDGE A OUT 2————————
67Stepper 1 / A1————————
68Stepper 2 / A2————————
69LOW SIDE 5—W38—0.5OEM-A-31———
7DIG_IN 2—W46—0.5OEM-A-37———
70Stepper 3 / B1————————
71Stepper 4 / B2————————
72LOW SIDE RELAY 13————————
73LOW SIDE 1—W34—0.5OEM-A-49———
74LOW SIDE 3—W36—0.5OEM-A-9———
75LOW SIDE RELAY 16————————
765V REF————————
77ANA TEMP 3—W44—0.5OEM-A-36———
79TACHOMETER—W41—0.5OEM-A-22———
8DIG_IN 3—W47—0.5OEM-A-39———
80CRANK VR+—W19—0.5OEM-A-68———
81CRANK VR-————————
82CAM B VR+————————
83CAM B VR-————————
84Sensor Ground—W17—0.5SP-0V-1———
86ANA TEMP 1—W33—0.5OEM-A-14———
89GROUND—W11—0.85SP-GND-1———
9LOW SIDE RELAY 18————————
90GROUND—W12—0.85SP-GND-1———

OEM-A

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1Ground (E-1)—W4—0.85SP-GND-1———
10Ground (OBD1 EGR enable)—W5—0.85SP-GND-1———
14Coolant temperature (CLT)—W33—0.5ME360-C1-86———
15EGR temperature sensor—W43—0.5ME360-C1-57———
16MAF ground—W13—0.5SP-0V-1———
17MAF signal—W31—0.5ME360-C1-26———
2Injector 6 (cyl 6)—W30—0.5ME360-C1-58———
20O2 sensor 1 (primary)—W42—0.5ME360-C1-17———
21Diagnostic L-line————————
22Tachometer output—W41—0.5ME360-C1-79———
23ECU main power (from engine-electronics relay)—W1—0.85SP-14V-1———
24Injector 1 (cyl 1)—W25—0.5ME360-C1-63———
25Injector 5 (cyl 5)—W29—0.5ME360-C1-28———
26Injector 3 (cyl 3)—W27—0.5ME360-C1-33———
27Idle air control valve—W37—0.5ME360-C1-44———
3Injector 2 (cyl 2)—W26—0.5ME360-C1-4———
31EVAP canister purge valve—W38—0.5ME360-C1-69———
33Sensor ground bus—W14—0.5SP-0V-1———
34Knock sensor 1—W21—0.5ME360-C1-53———
36Intake air temperature (IAT)—W44—0.5ME360-C1-77———
37A/C compressor switch—W46—0.5ME360-C1-7———
38Ignition switch (run/start)————————
39A/C switch (cabin)—W47—0.5ME360-C1-8———
4Injector 4 (cyl 4)—W28—0.5ME360-C1-3———
40Throttle position sensor 1—W32—0.5ME360-C1-56———
41TPS power (+5V)—W18—0.5ME360-C1-45———
43Diagnostic K-line————————
44Camshaft position sensor (G40)—W20—0.5ME360-C1-22———
49Secondary air injection relay control—W34—0.5ME360-C1-73———
5Check engine light (MIL)—W39—0.5ME360-C1-39———
51MFA fuel-consumption signal————————
52Ignition coil 4 (coil pack pin 4)—W24—0.5ME360-C1-2———
53Idle air control valve (2nd)—W40—0.5ME360-C1-37———
54Battery constant (+12V)————————
55Ground (E-3)—W6—0.85SP-GND-1———
56Ground (E-4)—W7—0.85SP-GND-1———
59Mass airflow sensor (5th terminal)————————
6Fuel pump relay control—W35—0.5ME360-C1-12———
60Ignition coil 3 (coil pack pin 3)—W23—0.5ME360-C1-31———
65Vehicle speed sensor (VSS)—W45—0.5ME360-C1-6———
67Crank sensor return (VR-)—W15—0.5SP-0V-1———
68Crank position sensor (G28, VR+)—W19—0.5ME360-C1-80———
7Ground (E-2)—W8—0.85SP-GND-1———
8Ignition coil 2 (coil pack pin 2)—W22—0.5ME360-C1-32———
9Engine electronics relay control—W36—0.5ME360-C1-74———

SP-0V

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W13—0.5OEM-A-16———
1——W14—0.5OEM-A-33———
1——W15—0.5OEM-A-67———
1——W16—0.5ME360-C1-52———
1——W17—0.5ME360-C1-84———

SP-14V

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W1—0.85OEM-A-23———
1——W2—0.85ME360-C1-15———
1——W3—0.85ME360-C1-64———

SP-GND

CavityFunctionSignalWireColourGauge (mm²)DestinationTerminalSealPlug
1——W4—0.85OEM-A-1———
1——W5—0.85OEM-A-10———
1——W6—0.85OEM-A-55———
1——W7—0.85OEM-A-56———
1——W8—0.85OEM-A-7———
1——W9—0.85ME360-C1-10———
1——W10—0.85ME360-C1-61———
1——W11—0.85ME360-C1-89———
1——W12—0.85ME360-C1-90———

Pin map

OEM pointOEM functionOEM familyTarget pointTarget functionTarget familyWire colourEvidence
OEM-A-1Ground (E-1)groundME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90GROUND CHASSIS + GROUND + GROUND + GROUNDgroundsingle_source
OEM-A-10Ground (OBD1 EGR enable)groundME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90GROUND CHASSIS + GROUND + GROUND + GROUNDgroundsingle_source
OEM-A-14Coolant temperature (CLT)temp_inME360-C1-86ANA TEMP 1temp_insingle_source
OEM-A-15EGR temperature sensortemp_inME360-C1-57ANA TEMP 2temp_insingle_source
OEM-A-16MAF groundsensor_groundME360-C1-52 + ME360-C1-84SENSORS GROUND + Sensor Groundsensor_groundsingle_source
OEM-A-17MAF signalanalog_inME360-C1-26ANA VOLT 1analog_insingle_source
OEM-A-2Injector 6 (cyl 6)injector_outME360-C1-58INJECTOR 6injector_outsingle_source
OEM-A-20O2 sensor 1 (primary)lambda_nb_inME360-C1-17ANA VOLT 3analog_insingle_source
OEM-A-21Diagnostic L-lineserial———single_source
OEM-A-22Tachometer outputtacho_outME360-C1-79TACHOMETERtacho_outsingle_source
OEM-A-23ECU main power (from engine-electronics relay)power_inME360-C1-15 + ME360-C1-64IGN +12V + VBATpower_insingle_source
OEM-A-24Injector 1 (cyl 1)injector_outME360-C1-63INJECTOR 1injector_outsingle_source
OEM-A-25Injector 5 (cyl 5)injector_outME360-C1-28INJECTOR 5injector_outsingle_source
OEM-A-26Injector 3 (cyl 3)injector_outME360-C1-33INJECTOR 3injector_outsingle_source
OEM-A-27Idle air control valvelow_side_outME360-C1-44LOW SIDE 4low_side_outsingle_source
OEM-A-3Injector 2 (cyl 2)injector_outME360-C1-4INJECTOR 2injector_outsingle_source
OEM-A-31EVAP canister purge valvelow_side_outME360-C1-69LOW SIDE 5low_side_outsingle_source
OEM-A-33Sensor ground bussensor_groundME360-C1-52 + ME360-C1-84SENSORS GROUND + Sensor Groundsensor_groundsingle_source
OEM-A-34Knock sensor 1knock_inME360-C1-53KNOCK 1 SIGNALknock_insingle_source
OEM-A-36Intake air temperature (IAT)temp_inME360-C1-77ANA TEMP 3temp_insingle_source
OEM-A-37A/C compressor switchdigital_inME360-C1-7DIG_IN 2digital_insingle_source
OEM-A-38Ignition switch (run/start)digital_in———single_source
OEM-A-39A/C switch (cabin)digital_inME360-C1-8DIG_IN 3digital_insingle_source
OEM-A-4Injector 4 (cyl 4)injector_outME360-C1-3INJECTOR 4injector_outsingle_source
OEM-A-40Throttle position sensor 1analog_inME360-C1-56ANA VOLT 2analog_insingle_source
OEM-A-41TPS power (+5V)vrefME360-C1-455V REFvrefsingle_source
OEM-A-43Diagnostic K-lineserial———single_source
OEM-A-44Camshaft position sensor (G40)trigger_inME360-C1-22CAM A VR+trigger_insingle_source
OEM-A-49Secondary air injection relay controllow_side_outME360-C1-73LOW SIDE 1low_side_outsingle_source
OEM-A-5Check engine light (MIL)low_side_outME360-C1-39LOW SIDE 6low_side_outsingle_source
OEM-A-51MFA fuel-consumption signaltacho_out———single_source
OEM-A-52Ignition coil 4 (coil pack pin 4)ignition_outME360-C1-2COIL 3ignition_outsingle_source
OEM-A-53Idle air control valve (2nd)low_side_outME360-C1-37LOW SIDE RELAY 11low_side_outsingle_source
OEM-A-54Battery constant (+12V)power_in———single_source
OEM-A-55Ground (E-3)groundME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90GROUND CHASSIS + GROUND + GROUND + GROUNDgroundsingle_source
OEM-A-56Ground (E-4)groundME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90GROUND CHASSIS + GROUND + GROUND + GROUNDgroundsingle_source
OEM-A-59Mass airflow sensor (5th terminal)sensor_out———single_source
OEM-A-6Fuel pump relay controllow_side_outME360-C1-12LOW SIDE 2low_side_outsingle_source
OEM-A-60Ignition coil 3 (coil pack pin 3)ignition_outME360-C1-31COIL 2ignition_outsingle_source
OEM-A-65Vehicle speed sensor (VSS)digital_inME360-C1-6DIG_IN 1digital_insingle_source
OEM-A-67Crank sensor return (VR-)sensor_groundME360-C1-52 + ME360-C1-84SENSORS GROUND + Sensor Groundsensor_groundsingle_source
OEM-A-68Crank position sensor (G28, VR+)trigger_inME360-C1-80CRANK VR+trigger_insingle_source
OEM-A-7Ground (E-2)groundME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90GROUND CHASSIS + GROUND + GROUND + GROUNDgroundsingle_source
OEM-A-8Ignition coil 2 (coil pack pin 2)ignition_outME360-C1-32COIL 1ignition_outsingle_source
OEM-A-9Engine electronics relay controllow_side_outME360-C1-74LOW SIDE 3low_side_outsingle_source

Cut list

WireFromToGauge (mm²)ColourLengthSignalIdent
W1OEM-A-23SP-14V-10.85no routeECU main power (from engine-electronics relay)—
W2SP-14V-1ME360-C1-150.85no routeIGN +12V—
W3SP-14V-1ME360-C1-640.85no routeVBAT—
W4OEM-A-1SP-GND-10.85no routeGround (E-1)—
W5OEM-A-10SP-GND-10.85no routeGround (OBD1 EGR enable)—
W6OEM-A-55SP-GND-10.85no routeGround (E-3)—
W7OEM-A-56SP-GND-10.85no routeGround (E-4)—
W8OEM-A-7SP-GND-10.85no routeGround (E-2)—
W9SP-GND-1ME360-C1-100.85no routeGROUND CHASSIS—
W10SP-GND-1ME360-C1-610.85no routeGROUND—
W11SP-GND-1ME360-C1-890.85no routeGROUND—
W12SP-GND-1ME360-C1-900.85no routeGROUND—
W13OEM-A-16SP-0V-10.5no routeMAF ground—
W14OEM-A-33SP-0V-10.5no routeSensor ground bus—
W15OEM-A-67SP-0V-10.5no routeCrank sensor return (VR-)—
W16SP-0V-1ME360-C1-520.5no routeSENSORS GROUND—
W17SP-0V-1ME360-C1-840.5no routeSensor Ground—
W18OEM-A-41ME360-C1-450.5no routeTPS power (+5V)—
W19OEM-A-68ME360-C1-800.5no routeCrank position sensor (G28, VR+)—
W20OEM-A-44ME360-C1-220.5no routeCamshaft position sensor (G40)—
W21OEM-A-34ME360-C1-530.5no routeKnock sensor 1—
W22OEM-A-8ME360-C1-320.5no routeIgnition coil 2 (coil pack pin 2)—
W23OEM-A-60ME360-C1-310.5no routeIgnition coil 3 (coil pack pin 3)—
W24OEM-A-52ME360-C1-20.5no routeIgnition coil 4 (coil pack pin 4)—
W25OEM-A-24ME360-C1-630.5no routeInjector 1 (cyl 1)—
W26OEM-A-3ME360-C1-40.5no routeInjector 2 (cyl 2)—
W27OEM-A-26ME360-C1-330.5no routeInjector 3 (cyl 3)—
W28OEM-A-4ME360-C1-30.5no routeInjector 4 (cyl 4)—
W29OEM-A-25ME360-C1-280.5no routeInjector 5 (cyl 5)—
W30OEM-A-2ME360-C1-580.5no routeInjector 6 (cyl 6)—
W31OEM-A-17ME360-C1-260.5no routeMAF signal—
W32OEM-A-40ME360-C1-560.5no routeThrottle position sensor 1—
W33OEM-A-14ME360-C1-860.5no routeCoolant temperature (CLT)—
W34OEM-A-49ME360-C1-730.5no routeSecondary air injection relay control—
W35OEM-A-6ME360-C1-120.5no routeFuel pump relay control—
W36OEM-A-9ME360-C1-740.5no routeEngine electronics relay control—
W37OEM-A-27ME360-C1-440.5no routeIdle air control valve—
W38OEM-A-31ME360-C1-690.5no routeEVAP canister purge valve—
W39OEM-A-5ME360-C1-390.5no routeCheck engine light (MIL)—
W40OEM-A-53ME360-C1-370.5no routeIdle air control valve (2nd)—
W41OEM-A-22ME360-C1-790.5no routeTachometer output—
W42OEM-A-20ME360-C1-170.5no routeO2 sensor 1 (primary)—
W43OEM-A-15ME360-C1-570.5no routeEGR temperature sensor—
W44OEM-A-36ME360-C1-770.5no routeIntake air temperature (IAT)—
W45OEM-A-65ME360-C1-60.5no routeVehicle speed sensor (VSS)—
W46OEM-A-37ME360-C1-70.5no routeA/C compressor switch—
W47OEM-A-39ME360-C1-80.5no routeA/C switch (cabin)—

Bill of materials

CategoryPart numberManufacturerDescriptionQtyUnit

ECU setup sheet

RoleEngine refEngine signalSensorECU pointECU functionECU classSetup flag
No configured channels.

Findings

Open (2)

SeverityCodeSubjectMessage
errorREQUIRED_UNMAPPEDOEM-A-38Required OEM function "Ignition switch (run/start)" (digital_in) is not connected to the new ECU.
infoUNMAPPEDOEM4 optional OEM pins are not mapped: OEM-A-21 Diagnostic L-line; OEM-A-43 Diagnostic K-line; OEM-A-51 MFA fuel-consumption signal; OEM-A-59 Mass airflow sensor (5th terminal)

Accepted (1)

CodeSubjectReasonBy
REQUIRED_UNMAPPEDOEM-A-54Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed.mapping-proposal

Notes

Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-A 38: Ignition switch (run/start): key-on 12 V sense — optional in a swap (the main relay is energized from keyed 12 V, not from this pin); Motorsport Electronics ME360 has no dedicated key-on input Not wired: - OEM-A 54: Battery constant (+12V): Motorsport Electronics ME360 has no battery-constant input; not needed - OEM-A 51: MFA fuel-consumption signal: no free tacho/frequency_out/low_side/ls_hs on Motorsport Electronics ME360 - OEM-A 21: Diagnostic L-line: no free k_line on Motorsport Electronics ME360 - OEM-A 43: Diagnostic K-line: no free k_line on Motorsport Electronics ME360 - OEM-A 59: Mass airflow sensor (5th terminal): no rule for class sensor_signal; wire by hand

Sources

ReliabilityKindTitleURLArchiveCapturedSHA-256
4vendor_docMotorsport Electronics GEN2 ME221/ME360/ME442 wire-in pinouthttps://motorsport-electronics.co.uk/onlinehelp/html/ME442ME360ME221GEN2Wire-InPinout.html———
2community_copya2resource: VR6/ABA Motronic M2.9 (OBD1) engine control unit pinouthttp://www.a2resource.com/electrical/management/motronicvr6aba.html———