VW Golf Mk4 1.8T 20v (AUM, Bosch ME7.5) DBW → Link G5 Voodoo Pro V2 (auto)
VW Golf Mk4 1.8T 20v (AUM, Bosch ME7.5) DBW — Link — G5 Voodoo Pro V2
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 68 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-T121-121 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-T121-21 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | G5VOODOOPROV-A-A5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | G5VOODOOPROV-B-B5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-T121-1 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-T121-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | G5VOODOOPROV-A-A25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | G5VOODOOPROV-A-A34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | G5VOODOOPROV-B-B25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | G5VOODOOPROV-B-B34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | G5VOODOOPROV-E-E21 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | G5VOODOOPROV-E-E7 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-T121-108 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-T121-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-T121-34 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-T121-36 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-T121-90 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-T121-91 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | G5VOODOOPROV-A-A24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | G5VOODOOPROV-B-B22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-T121-72 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-T121-73 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-T121-83 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-T121-98 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-T121-99 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-T121-82 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-T121-86 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-T121-106 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-T121-107 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-T121-102 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-T121-95 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-T121-103 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-T121-94 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-T121-96 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-T121-89 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-T121-97 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-T121-88 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-T121-118 | G5VOODOOPROV-B-B26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-T121-117 | G5VOODOOPROV-B-B18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-T121-3 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-T121-53 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-T121-101 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-T121-33 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-T121-84 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-T121-35 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-T121-92 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-T121-93 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-T121-65 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-T121-66 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-T121-5 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-T121-63 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-T121-104 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-T121-105 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-T121-115 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-T121-47 | G5VOODOOPROV-E-E3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-T121-48 | G5VOODOOPROV-E-E2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-T121-64 | G5VOODOOPROV-E-E1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-T121-51 | G5VOODOOPROV-E-E17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-T121-52 | G5VOODOOPROV-E-E24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-T121-70 | G5VOODOOPROV-E-E19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-T121-71 | G5VOODOOPROV-E-E26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-T121-68 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-T121-69 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-T121-85 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-T121-54 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-T121-60 | G5VOODOOPROV-E-E5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-T121-58 | G5VOODOOPROV-E-E6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | G5VOODOOPROV-A-A24 | G5VOODOOPROV-A-A32 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 2 | G5VOODOOPROV-A-A24 | G5VOODOOPROV-A-A5 | open (OL) | sensor ground must not touch +12 V supply | |
| 3 | G5VOODOOPROV-A-A25 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | G5VOODOOPROV-A-A25 | G5VOODOOPROV-A-A5 | open (OL) | power ground must not touch +12 V supply | |
| 5 | G5VOODOOPROV-A-A5 | G5VOODOOPROV-A-A32 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W38 | — | 0.5 | OEM-T121-88 | — | — | — |
| A10 | Ignition 4 | — | W34 | — | 0.5 | OEM-T121-94 | — | — | — |
| A11 | Ignition 3 | — | W33 | — | 0.5 | OEM-T121-103 | — | — | — |
| A12 | Ignition 2 | — | W32 | — | 0.5 | OEM-T121-95 | — | — | — |
| A13 | Ignition 1 | — | W31 | — | 0.5 | OEM-T121-102 | — | — | — |
| A14 | Analogue Volt 4 | — | W63 | — | 0.5 | OEM-T121-68 | — | — | — |
| A15 | Analogue Temp 1 | — | W48 | — | 0.5 | OEM-T121-93 | — | — | — |
| A16 | Analogue Temp 2 | — | W65 | — | 0.5 | OEM-T121-85 | — | — | — |
| A17 | Analogue Volt 1 | — | W42 | — | 0.5 | OEM-T121-53 | — | — | — |
| A18 | ADIO 4 | — | W64 | — | 0.5 | OEM-T121-69 | — | — | — |
| A19 | ADIO 3 | — | W46 | — | 0.5 | OEM-T121-35 | — | — | — |
| A2 | Injection 3 | — | W37 | — | 0.5 | OEM-T121-97 | — | — | — |
| A20 | ADIO 2 | — | W44 | — | 0.5 | OEM-T121-33 | — | — | — |
| A21 | ADIO 1 | — | W43 | — | 0.5 | OEM-T121-101 | — | — | — |
| A22 | Analogue Volt 2 | — | W45 | — | 0.5 | OEM-T121-84 | — | — | — |
| A23 | Digital Input 3 | — | — | — | — | — | — | — | — |
| A24 | Sensor Ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| A25 | Ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| A26 | ADIO 8 | — | — | — | — | — | — | — | — |
| A27 | ADIO 7 | — | — | — | — | — | — | — | — |
| A28 | ADIO 6 | — | — | — | — | — | — | — | — |
| A29 | ADIO 5 | — | — | — | — | — | — | — | — |
| A3 | Injection 2 | — | W36 | — | 0.5 | OEM-T121-89 | — | — | — |
| A30 | Digital Input 1 | — | W66 | — | 0.5 | OEM-T121-54 | — | — | — |
| A31 | Digital Input 2 | — | — | — | — | — | — | — | — |
| A32 | +5V Out | — | W26 | — | 0.5 | SP-5V1-1 | — | — | — |
| A33 | Analogue Volt 3 | — | W47 | — | 0.5 | OEM-T121-92 | — | — | — |
| A34 | Ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| A4 | Injection 1 | — | W35 | — | 0.5 | OEM-T121-96 | — | — | — |
| A5 | +14V | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| A6 | Ignition Switch | — | W41 | — | 0.5 | OEM-T121-3 | — | — | — |
| A7 | Shield Ground | — | — | — | — | — | — | — | — |
| A8 | Trigger 1 | — | W27 | — | 0.5 | OEM-T121-82 | — | — | — |
| A9 | Trigger 2 | — | W28 | — | 0.5 | OEM-T121-86 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W54 | — | 0.5 | OEM-T121-105 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | — | — | — | — | — | — | — |
| B13 | Ignition 5 | — | — | — | — | — | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | — | — | — | — | — | — | — |
| B16 | Analogue Volt 7 | — | — | — | — | — | — | — | — |
| B17 | Shield Ground | — | — | — | — | — | — | — | — |
| B18 | Aux 1 / H-Bridge 1 | — | W40 | — | 0.5 | OEM-T121-117 | — | — | — |
| B19 | Digital Input 6 / K-Line 2 | — | — | — | — | — | — | — | — |
| B2 | Injection 7 | — | W53 | — | 0.5 | OEM-T121-104 | — | — | — |
| B20 | Digital Input 5 / K-Line 1 | — | — | — | — | — | — | — | — |
| B21 | Digital Input 4 | — | — | — | — | — | — | — | — |
| B22 | Sensor Ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| B23 | Analogue Volt 8 | — | — | — | — | — | — | — | — |
| B24 | Analogue Volt 9 | — | — | — | — | — | — | — | — |
| B25 | Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| B26 | Aux 2 / H-Bridge 1 | — | W39 | — | 0.5 | OEM-T121-118 | — | — | — |
| B27 | Digital Input 10 | — | — | — | — | — | — | — | — |
| B28 | Digital Input 9 | — | — | — | — | — | — | — | — |
| B29 | Digital Input 8 | — | — | — | — | — | — | — | — |
| B3 | Injection 6 | — | W52 | — | 0.5 | OEM-T121-63 | — | — | — |
| B30 | Digital Input 7 | — | — | — | — | — | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | — | — | — | — | — | — | — |
| B34 | Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| B4 | Injection 5 | — | W51 | — | 0.5 | OEM-T121-5 | — | — | — |
| B5 | +14V E-Throttle | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| B6 | Analogue Temp 3 | — | — | — | — | — | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W30 | — | 0.5 | OEM-T121-107 | — | — | — |
| B9 | Knock 1 | — | W29 | — | 0.5 | OEM-T121-106 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | W58 | — | 0.5 | OEM-T121-64 | — | — | — |
| E10 | Ignition 10 / Injection 14 | — | — | — | — | — | — | — | — |
| E11 | Ignition 9 / Injection 13 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 3 / H-Bridge 2 | — | — | — | — | — | — | — | — |
| E15 | Aux 5 / WB1 Heat | — | W49 | — | 0.5 | OEM-T121-65 | — | — | — |
| E16 | WB1 RE | — | — | — | — | — | — | — | — |
| E17 | WB1 IPE | — | W59 | — | 0.5 | OEM-T121-51 | — | — | — |
| E18 | WB1 APE | — | — | — | — | — | — | — | — |
| E19 | WB1 MES | — | W61 | — | 0.5 | OEM-T121-70 | — | — | — |
| E2 | Injection 11 | — | W57 | — | 0.5 | OEM-T121-48 | — | — | — |
| E20 | Aux 4 / H-Bridge 2 | — | — | — | — | — | — | — | — |
| E21 | Ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| E22 | Aux 6 / WB2 Heat | — | W50 | — | 0.5 | OEM-T121-66 | — | — | — |
| E23 | WB2 RE | — | — | — | — | — | — | — | — |
| E24 | WB2 IPE | — | W60 | — | 0.5 | OEM-T121-52 | — | — | — |
| E25 | WB2 APE | — | — | — | — | — | — | — | — |
| E26 | WB2 MES | — | W62 | — | 0.5 | OEM-T121-71 | — | — | — |
| E3 | Injection 10 | — | W56 | — | 0.5 | OEM-T121-47 | — | — | — |
| E4 | Injection 9 | — | W55 | — | 0.5 | OEM-T121-115 | — | — | — |
| E5 | CAN 2 High | — | W67 | — | 0.5 | OEM-T121-60 | — | — | — |
| E6 | CAN 2 Low | — | W68 | — | 0.5 | OEM-T121-58 | — | — | — |
| E7 | Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| E8 | Ignition 12 / Injection 16 | — | — | — | — | — | — | — | — |
| E9 | Ignition 11 / Injection 15 | — | — | — | — | — | — | — | — |
OEM-T121
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 101 | Boost pressure sensor (G31) | — | W43 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 102 | Ignition coil 1 (N127) | — | W31 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 103 | Ignition coil 3 (N158) | — | W33 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 104 | Boost control solenoid (N75) | — | W53 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 105 | Diverter valve (N249) | — | W54 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 106 | Knock sensor 1 (G61) | — | W29 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 107 | Knock sensor 2 (G66) | — | W30 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 108 | Sensor ground | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 115 | VVT camshaft adjustment valve (N205) | — | W55 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 117 | Throttle motor G186 (+) | — | W40 | — | 0.5 | G5VOODOOPROV-B-B18 | — | — | — |
| 118 | Throttle motor G186 (−) | — | W39 | — | 0.5 | G5VOODOOPROV-B-B26 | — | — | — |
| 121 | ECM + coil power (J271 relay feed) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | ECU ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 21 | ECM power (J271 relay feed) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | MAF sensor supply (G70) | — | — | — | — | — | — | — | — |
| 29 | MAF sensor ground (G70) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Ignition switch +12V (term 15) | — | W41 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
| 33 | Accelerator pedal position 1 (G79) | — | W44 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 34 | Accelerator pedal position 1 ground (G79) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 35 | Accelerator pedal position 2 (G185) | — | W46 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 36 | Accelerator pedal position 2 ground (G185) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 37 | Engine speed signal (tacho to cluster) | — | — | — | — | — | — | — | — |
| 43 | K-line diagnostics (OBD pin 7) | — | — | — | — | — | — | — | — |
| 47 | Check engine light (MIL) | — | W56 | — | 0.5 | G5VOODOOPROV-E-E3 | — | — | — |
| 48 | EPC warning light | — | W57 | — | 0.5 | G5VOODOOPROV-E-E2 | — | — | — |
| 5 | Wideband lambda heater (Z19) | — | W51 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 51 | Wideband lambda pump (G39) | — | W59 | — | 0.5 | G5VOODOOPROV-E-E17 | — | — | — |
| 52 | Wideband lambda pump (G39) | — | W60 | — | 0.5 | G5VOODOOPROV-E-E24 | — | — | — |
| 53 | MAF sensor signal (G70) | — | W42 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 54 | Road speed signal (VSS) | — | W66 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 58 | CAN bus low | — | W68 | — | 0.5 | G5VOODOOPROV-E-E6 | — | — | — |
| 60 | CAN bus high | — | W67 | — | 0.5 | G5VOODOOPROV-E-E5 | — | — | — |
| 62 | Battery constant +12V (term 30) | — | — | — | — | — | — | — | — |
| 63 | Post-cat lambda heater (Z29) | — | W52 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 64 | EVAP canister valve (N80) | — | W58 | — | 0.5 | G5VOODOOPROV-E-E1 | — | — | — |
| 65 | Fuel pump relay control | — | W49 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 66 | Secondary-air pump relay (J299) | — | W50 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 68 | Post-cat lambda signal (G130) | — | W63 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 69 | Post-cat lambda signal (G130) | — | W64 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 70 | Wideband lambda Nernst signal (G39) | — | W61 | — | 0.5 | G5VOODOOPROV-E-E19 | — | — | — |
| 71 | Wideband lambda Nernst signal (G39) | — | W62 | — | 0.5 | G5VOODOOPROV-E-E26 | — | — | — |
| 72 | Accelerator pedal position 1 5V supply (G79) | — | W21 | — | 0.5 | SP-5V1-1 | — | — | — |
| 73 | Accelerator pedal position 2 5V supply (G185) | — | W22 | — | 0.5 | SP-5V1-1 | — | — | — |
| 82 | Crank position sensor (G28) | — | W27 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 83 | Throttle position sensor 5V supply (G187/G188) | — | W23 | — | 0.5 | SP-5V1-1 | — | — | — |
| 84 | Throttle position sensor 1 (G187) | — | W45 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 85 | Intake air temperature (G42) | — | W65 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 86 | Camshaft position sensor (G40) | — | W28 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 88 | Injector 4 (N33) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 89 | Injector 2 (N31) | — | W36 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 9 | Secondary-air injection valve (N112) | — | — | — | — | — | — | — | — |
| 90 | Crank position sensor ground (G28) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 91 | Throttle position sensor ground (G187/G188) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 92 | Throttle position sensor 2 (G188) | — | W47 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 93 | Engine coolant temperature (G62) | — | W48 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 94 | Ignition coil 4 (N163) | — | W34 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 95 | Ignition coil 2 (N128) | — | W32 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 96 | Injector 1 (N30) | — | W35 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 97 | Injector 3 (N32) | — | W37 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 98 | Cam + boost sensor 5V supply (G40/G31) | — | W24 | — | 0.5 | SP-5V1-1 | — | — | — |
| 99 | Knock sensor 5V supply (G61/G66) | — | W25 | — | 0.5 | SP-5V1-1 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W13 | — | 0.5 | OEM-T121-108 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-T121-29 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-T121-34 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-T121-36 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-T121-90 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-T121-91 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | G5VOODOOPROV-A-A24 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | G5VOODOOPROV-B-B22 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-T121-121 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-T121-21 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | G5VOODOOPROV-A-A5 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | G5VOODOOPROV-B-B5 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W21 | — | 0.5 | OEM-T121-72 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-T121-73 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-T121-83 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-T121-98 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | OEM-T121-99 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-T121-1 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-T121-2 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | G5VOODOOPROV-A-A25 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | G5VOODOOPROV-A-A34 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | G5VOODOOPROV-B-B25 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | G5VOODOOPROV-B-B34 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | G5VOODOOPROV-E-E21 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | G5VOODOOPROV-E-E7 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-T121-1 | ECU ground | ground | G5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7 | Ground + Ground + Ground + Ground + Ground + Ground | ground | corroborated | |
| OEM-T121-101 | Boost pressure sensor (G31) | analog_in | G5VOODOOPROV-A-A21 | ADIO 1 | analog_in | corroborated | |
| OEM-T121-102 | Ignition coil 1 (N127) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | corroborated | |
| OEM-T121-103 | Ignition coil 3 (N158) | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | corroborated | |
| OEM-T121-104 | Boost control solenoid (N75) | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | corroborated | |
| OEM-T121-105 | Diverter valve (N249) | low_side_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | corroborated | |
| OEM-T121-106 | Knock sensor 1 (G61) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | corroborated | |
| OEM-T121-107 | Knock sensor 2 (G66) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | corroborated | |
| OEM-T121-108 | Sensor ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-T121-115 | VVT camshaft adjustment valve (N205) | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | corroborated | |
| OEM-T121-117 | Throttle motor G186 (+) | hbridge_out | G5VOODOOPROV-B-B18 | Aux 1 / H-Bridge 1 | hbridge_out | corroborated | |
| OEM-T121-118 | Throttle motor G186 (−) | hbridge_out | G5VOODOOPROV-B-B26 | Aux 2 / H-Bridge 1 | hbridge_out | corroborated | |
| OEM-T121-121 | ECM + coil power (J271 relay feed) | power_in | G5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5 | +14V + +14V E-Throttle | power_in | corroborated | |
| OEM-T121-2 | ECU ground | ground | G5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7 | Ground + Ground + Ground + Ground + Ground + Ground | ground | corroborated | |
| OEM-T121-21 | ECM power (J271 relay feed) | power_in | G5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5 | +14V + +14V E-Throttle | power_in | corroborated | |
| OEM-T121-27 | MAF sensor supply (G70) | power_in | — | — | — | corroborated | |
| OEM-T121-29 | MAF sensor ground (G70) | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-T121-3 | Ignition switch +12V (term 15) | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | corroborated | |
| OEM-T121-33 | Accelerator pedal position 1 (G79) | analog_in | G5VOODOOPROV-A-A20 | ADIO 2 | analog_in | corroborated | |
| OEM-T121-34 | Accelerator pedal position 1 ground (G79) | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-T121-35 | Accelerator pedal position 2 (G185) | analog_in | G5VOODOOPROV-A-A19 | ADIO 3 | analog_in | corroborated | |
| OEM-T121-36 | Accelerator pedal position 2 ground (G185) | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-T121-37 | Engine speed signal (tacho to cluster) | tacho_out | — | — | — | corroborated | |
| OEM-T121-43 | K-line diagnostics (OBD pin 7) | serial | — | — | — | corroborated | |
| OEM-T121-47 | Check engine light (MIL) | low_side_out | G5VOODOOPROV-E-E3 | Injection 10 | injector_out | corroborated | |
| OEM-T121-48 | EPC warning light | low_side_out | G5VOODOOPROV-E-E2 | Injection 11 | injector_out | corroborated | |
| OEM-T121-5 | Wideband lambda heater (Z19) | low_side_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | corroborated | |
| OEM-T121-51 | Wideband lambda pump (G39) | wb_ip | G5VOODOOPROV-E-E17 | WB1 IPE | wb_ip | corroborated | |
| OEM-T121-52 | Wideband lambda pump (G39) | wb_ip | G5VOODOOPROV-E-E24 | WB2 IPE | wb_ip | corroborated | |
| OEM-T121-53 | MAF sensor signal (G70) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | corroborated | |
| OEM-T121-54 | Road speed signal (VSS) | digital_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | corroborated | |
| OEM-T121-58 | CAN bus low | can_l | G5VOODOOPROV-E-E6 | CAN 2 Low | can_l | corroborated | |
| OEM-T121-60 | CAN bus high | can_h | G5VOODOOPROV-E-E5 | CAN 2 High | can_h | corroborated | |
| OEM-T121-62 | Battery constant +12V (term 30) | power_in | — | — | — | corroborated | |
| OEM-T121-63 | Post-cat lambda heater (Z29) | low_side_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | corroborated | |
| OEM-T121-64 | EVAP canister valve (N80) | low_side_out | G5VOODOOPROV-E-E1 | Injection 12 | injector_out | corroborated | |
| OEM-T121-65 | Fuel pump relay control | low_side_out | G5VOODOOPROV-E-E15 | Aux 5 / WB1 Heat | low_side_out | corroborated | |
| OEM-T121-66 | Secondary-air pump relay (J299) | low_side_out | G5VOODOOPROV-E-E22 | Aux 6 / WB2 Heat | low_side_out | corroborated | |
| OEM-T121-68 | Post-cat lambda signal (G130) | lambda_nb_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | corroborated | |
| OEM-T121-69 | Post-cat lambda signal (G130) | lambda_nb_in | G5VOODOOPROV-A-A18 | ADIO 4 | analog_in | corroborated | |
| OEM-T121-70 | Wideband lambda Nernst signal (G39) | wb_vs | G5VOODOOPROV-E-E19 | WB1 MES | wb_vs | corroborated | |
| OEM-T121-71 | Wideband lambda Nernst signal (G39) | wb_vs | G5VOODOOPROV-E-E26 | WB2 MES | wb_vs | corroborated | |
| OEM-T121-72 | Accelerator pedal position 1 5V supply (G79) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-T121-73 | Accelerator pedal position 2 5V supply (G185) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-T121-82 | Crank position sensor (G28) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | corroborated | |
| OEM-T121-83 | Throttle position sensor 5V supply (G187/G188) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-T121-84 | Throttle position sensor 1 (G187) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | corroborated | |
| OEM-T121-85 | Intake air temperature (G42) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | corroborated | |
| OEM-T121-86 | Camshaft position sensor (G40) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | corroborated | |
| OEM-T121-88 | Injector 4 (N33) | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | corroborated | |
| OEM-T121-89 | Injector 2 (N31) | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | corroborated | |
| OEM-T121-9 | Secondary-air injection valve (N112) | low_side_out | — | — | — | corroborated | |
| OEM-T121-90 | Crank position sensor ground (G28) | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-T121-91 | Throttle position sensor ground (G187/G188) | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-T121-92 | Throttle position sensor 2 (G188) | analog_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | corroborated | |
| OEM-T121-93 | Engine coolant temperature (G62) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | corroborated | |
| OEM-T121-94 | Ignition coil 4 (N163) | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | corroborated | |
| OEM-T121-95 | Ignition coil 2 (N128) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | corroborated | |
| OEM-T121-96 | Injector 1 (N30) | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | corroborated | |
| OEM-T121-97 | Injector 3 (N32) | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | corroborated | |
| OEM-T121-98 | Cam + boost sensor 5V supply (G40/G31) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-T121-99 | Knock sensor 5V supply (G61/G66) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-T121-121 | SP-14V-1 | 0.85 | no route | ECM + coil power (J271 relay feed) | — | |
| W2 | OEM-T121-21 | SP-14V-1 | 0.85 | no route | ECM power (J271 relay feed) | — | |
| W3 | SP-14V-1 | G5VOODOOPROV-A-A5 | 0.85 | no route | +14V | — | |
| W4 | SP-14V-1 | G5VOODOOPROV-B-B5 | 0.85 | no route | +14V E-Throttle | — | |
| W5 | OEM-T121-1 | SP-GND-1 | 0.85 | no route | ECU ground | — | |
| W6 | OEM-T121-2 | SP-GND-1 | 0.85 | no route | ECU ground | — | |
| W7 | SP-GND-1 | G5VOODOOPROV-A-A25 | 0.85 | no route | Ground | — | |
| W8 | SP-GND-1 | G5VOODOOPROV-A-A34 | 0.85 | no route | Ground | — | |
| W9 | SP-GND-1 | G5VOODOOPROV-B-B25 | 0.85 | no route | Ground | — | |
| W10 | SP-GND-1 | G5VOODOOPROV-B-B34 | 0.85 | no route | Ground | — | |
| W11 | SP-GND-1 | G5VOODOOPROV-E-E21 | 0.85 | no route | Ground | — | |
| W12 | SP-GND-1 | G5VOODOOPROV-E-E7 | 0.85 | no route | Ground | — | |
| W13 | OEM-T121-108 | SP-0V-1 | 0.5 | no route | Sensor ground | — | |
| W14 | OEM-T121-29 | SP-0V-1 | 0.5 | no route | MAF sensor ground (G70) | — | |
| W15 | OEM-T121-34 | SP-0V-1 | 0.5 | no route | Accelerator pedal position 1 ground (G79) | — | |
| W16 | OEM-T121-36 | SP-0V-1 | 0.5 | no route | Accelerator pedal position 2 ground (G185) | — | |
| W17 | OEM-T121-90 | SP-0V-1 | 0.5 | no route | Crank position sensor ground (G28) | — | |
| W18 | OEM-T121-91 | SP-0V-1 | 0.5 | no route | Throttle position sensor ground (G187/G188) | — | |
| W19 | SP-0V-1 | G5VOODOOPROV-A-A24 | 0.5 | no route | Sensor Ground | — | |
| W20 | SP-0V-1 | G5VOODOOPROV-B-B22 | 0.5 | no route | Sensor Ground | — | |
| W21 | OEM-T121-72 | SP-5V1-1 | 0.5 | no route | Accelerator pedal position 1 5V supply (G79) | — | |
| W22 | OEM-T121-73 | SP-5V1-1 | 0.5 | no route | Accelerator pedal position 2 5V supply (G185) | — | |
| W23 | OEM-T121-83 | SP-5V1-1 | 0.5 | no route | Throttle position sensor 5V supply (G187/G188) | — | |
| W24 | OEM-T121-98 | SP-5V1-1 | 0.5 | no route | Cam + boost sensor 5V supply (G40/G31) | — | |
| W25 | OEM-T121-99 | SP-5V1-1 | 0.5 | no route | Knock sensor 5V supply (G61/G66) | — | |
| W26 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | no route | +5V Out | — | |
| W27 | OEM-T121-82 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position sensor (G28) | — | |
| W28 | OEM-T121-86 | G5VOODOOPROV-A-A9 | 0.5 | no route | Camshaft position sensor (G40) | — | |
| W29 | OEM-T121-106 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor 1 (G61) | — | |
| W30 | OEM-T121-107 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor 2 (G66) | — | |
| W31 | OEM-T121-102 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition coil 1 (N127) | — | |
| W32 | OEM-T121-95 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition coil 2 (N128) | — | |
| W33 | OEM-T121-103 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition coil 3 (N158) | — | |
| W34 | OEM-T121-94 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition coil 4 (N163) | — | |
| W35 | OEM-T121-96 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 (N30) | — | |
| W36 | OEM-T121-89 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 (N31) | — | |
| W37 | OEM-T121-97 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 (N32) | — | |
| W38 | OEM-T121-88 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4 (N33) | — | |
| W39 | OEM-T121-118 | G5VOODOOPROV-B-B26 | 0.5 | no route | Throttle motor G186 (−) | — | |
| W40 | OEM-T121-117 | G5VOODOOPROV-B-B18 | 0.5 | no route | Throttle motor G186 (+) | — | |
| W41 | OEM-T121-3 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition switch +12V (term 15) | — | |
| W42 | OEM-T121-53 | G5VOODOOPROV-A-A17 | 0.5 | no route | MAF sensor signal (G70) | — | |
| W43 | OEM-T121-101 | G5VOODOOPROV-A-A21 | 0.5 | no route | Boost pressure sensor (G31) | — | |
| W44 | OEM-T121-33 | G5VOODOOPROV-A-A20 | 0.5 | no route | Accelerator pedal position 1 (G79) | — | |
| W45 | OEM-T121-84 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position sensor 1 (G187) | — | |
| W46 | OEM-T121-35 | G5VOODOOPROV-A-A19 | 0.5 | no route | Accelerator pedal position 2 (G185) | — | |
| W47 | OEM-T121-92 | G5VOODOOPROV-A-A33 | 0.5 | no route | Throttle position sensor 2 (G188) | — | |
| W48 | OEM-T121-93 | G5VOODOOPROV-A-A15 | 0.5 | no route | Engine coolant temperature (G62) | — | |
| W49 | OEM-T121-65 | G5VOODOOPROV-E-E15 | 0.5 | no route | Fuel pump relay control | — | |
| W50 | OEM-T121-66 | G5VOODOOPROV-E-E22 | 0.5 | no route | Secondary-air pump relay (J299) | — | |
| W51 | OEM-T121-5 | G5VOODOOPROV-B-B4 | 0.5 | no route | Wideband lambda heater (Z19) | — | |
| W52 | OEM-T121-63 | G5VOODOOPROV-B-B3 | 0.5 | no route | Post-cat lambda heater (Z29) | — | |
| W53 | OEM-T121-104 | G5VOODOOPROV-B-B2 | 0.5 | no route | Boost control solenoid (N75) | — | |
| W54 | OEM-T121-105 | G5VOODOOPROV-B-B1 | 0.5 | no route | Diverter valve (N249) | — | |
| W55 | OEM-T121-115 | G5VOODOOPROV-E-E4 | 0.5 | no route | VVT camshaft adjustment valve (N205) | — | |
| W56 | OEM-T121-47 | G5VOODOOPROV-E-E3 | 0.5 | no route | Check engine light (MIL) | — | |
| W57 | OEM-T121-48 | G5VOODOOPROV-E-E2 | 0.5 | no route | EPC warning light | — | |
| W58 | OEM-T121-64 | G5VOODOOPROV-E-E1 | 0.5 | no route | EVAP canister valve (N80) | — | |
| W59 | OEM-T121-51 | G5VOODOOPROV-E-E17 | 0.5 | no route | Wideband lambda pump (G39) | — | |
| W60 | OEM-T121-52 | G5VOODOOPROV-E-E24 | 0.5 | no route | Wideband lambda pump (G39) | — | |
| W61 | OEM-T121-70 | G5VOODOOPROV-E-E19 | 0.5 | no route | Wideband lambda Nernst signal (G39) | — | |
| W62 | OEM-T121-71 | G5VOODOOPROV-E-E26 | 0.5 | no route | Wideband lambda Nernst signal (G39) | — | |
| W63 | OEM-T121-68 | G5VOODOOPROV-A-A14 | 0.5 | no route | Post-cat lambda signal (G130) | — | |
| W64 | OEM-T121-69 | G5VOODOOPROV-A-A18 | 0.5 | no route | Post-cat lambda signal (G130) | — | |
| W65 | OEM-T121-85 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (G42) | — | |
| W66 | OEM-T121-54 | G5VOODOOPROV-A-A30 | 0.5 | no route | Road speed signal (VSS) | — | |
| W67 | OEM-T121-60 | G5VOODOOPROV-E-E5 | 0.5 | no route | CAN bus high | — | |
| W68 | OEM-T121-58 | G5VOODOOPROV-E-E6 | 0.5 | no route | CAN bus low | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (15)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | DBW_MOTOR_CURRENT | G5VOODOOPROV-B-B18 | Cannot confirm G5 Voodoo Pro V2 can drive the throttle motor: neither the motor stall current (OEM-T121-117) nor the peak rating of G5VOODOOPROV-B-B18 "Aux 1 / H-Bridge 1" is known. |
| warn | DBW_MOTOR_CURRENT | G5VOODOOPROV-B-B26 | Cannot confirm G5 Voodoo Pro V2 can drive the throttle motor: neither the motor stall current (OEM-T121-118) nor the peak rating of G5VOODOOPROV-B-B26 "Aux 2 / H-Bridge 1" is known. |
| warn | DBW_SHARED_5V | G5VOODOOPROV-A-A32 + OEM-T121-72 + OEM-T121-73 + OEM-T121-83 + OEM-T121-98 + OEM-T121-99 + SP-5V1-1 | These 5 V supplies are separate in the stock car (OEM-T121-72 [pedal1], OEM-T121-73 [pedal2], OEM-T121-83 [tps], OEM-T121-98 [cam_boost], OEM-T121-99 [knock]) and here share one ECU 5 V (G5VOODOOPROV-A-A32). On a drive-by-wire car the OEM splits them so one short or fault can't corrupt both throttle/pedal tracks at once. G5 Voodoo Pro V2 has 1 5 V sensor supply pin(s). All are in use, so decide: accept the shared supply (and rely on the ECU's DBW fault checks), or add a separate regulated 5 V for the sub tracks. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-E-E15 | G5VOODOOPROV-E-E15 "Aux 5 / WB1 Heat" drives OEM-T121-65 Fuel pump relay control (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-E-E22 | G5VOODOOPROV-E-E22 "Aux 6 / WB2 Heat" drives OEM-T121-66 Secondary-air pump relay (J299) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | SUPPLY_GROUP | G5VOODOOPROV-A-A32 + OEM-T121-72 + OEM-T121-73 + OEM-T121-83 + OEM-T121-98 + OEM-T121-99 + SP-5V1-1 | Supplies meant to stay independent share one net: OEM-T121-72 [pedal1], OEM-T121-73 [pedal2], OEM-T121-83 [tps], OEM-T121-98 [cam_boost], OEM-T121-99 [knock]. The new ECU has no free 5 V reference, so they share one: normal on a standalone, but a short on any of these sensors drops them all. |
| info | NET_FAMILY | OEM-T121-104 ↔ G5VOODOOPROV-B-B2 | OEM-T121-104 "Boost control solenoid (N75)" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-T121-105 ↔ G5VOODOOPROV-B-B1 | OEM-T121-105 "Diverter valve (N249)" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-T121-115 ↔ G5VOODOOPROV-E-E4 | OEM-T121-115 "VVT camshaft adjustment valve (N205)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-T121-47 ↔ G5VOODOOPROV-E-E3 | OEM-T121-47 "Check engine light (MIL)" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-T121-48 ↔ G5VOODOOPROV-E-E2 | OEM-T121-48 "EPC warning light" [low_side_out] is wired to G5VOODOOPROV-E-E2 "Injection 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-T121-5 ↔ G5VOODOOPROV-B-B4 | OEM-T121-5 "Wideband lambda heater (Z19)" [low_side_out] is wired to G5VOODOOPROV-B-B4 "Injection 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-T121-63 ↔ G5VOODOOPROV-B-B3 | OEM-T121-63 "Post-cat lambda heater (Z29)" [low_side_out] is wired to G5VOODOOPROV-B-B3 "Injection 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-T121-64 ↔ G5VOODOOPROV-E-E1 | OEM-T121-64 "EVAP canister valve (N80)" [low_side_out] is wired to G5VOODOOPROV-E-E1 "Injection 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 4 optional OEM pins are not mapped: OEM-T121-27 MAF sensor supply (G70); OEM-T121-37 Engine speed signal (tacho to cluster); OEM-T121-43 K-line diagnostics (OBD pin 7); OEM-T121-9 Secondary-air injection valve (N112) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-T121-62 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-T121 62: Battery constant +12V (term 30): Link G5 Voodoo Pro V2 has no battery-constant input; not needed - OEM-T121 9: Secondary-air injection valve (N112): no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-T121 37: Engine speed signal (tacho to cluster): no free tacho/frequency_out/low_side/ls_hs on Link G5 Voodoo Pro V2 - OEM-T121 43: K-line diagnostics (OBD pin 7): no free k_line on Link G5 Voodoo Pro V2 - OEM-T121 27: MAF sensor supply (G70): no rule for class sensor_supply_in; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G5 Voodoo Pro V2 Installer I/O Table | https://kb.linkecu.com/__attachments/a_f77d027cd0c72fff9873eaed54ce6e4ec34cf9da8ae01036efdbecbb8c95be0b/G5%20Voodoo%20Pro%20V2%20Installer%20IO%20Table.pdf | — | — | — |
| 3 | community_copy | NefMoto: ME7.5 ECU bench-flashing power/ground pins | http://nefmoto.com/wiki/index.php?title=ECU_Bench_Flashing | — | — | — |
| 3 | community_copy | vwressources: Bosch Motronic ME7.5 (AMK/ARY/AUQ/ARX/AUM) T121 pinout | https://www.vwressources.planethoster.world/me75_pinout.html | — | — | — |