VW Golf/Jetta Mk2 1.8 8v Digifant II → MaxxECU MaxxECU PRO REV10+ (auto)
VW Golf/Jetta Mk2 1.8 8v Digifant II — MaxxECU — MaxxECU PRO
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 33 wires · 9 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-14 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | SP-14V-1 | MAXXECUPRO-C1-M4 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | MAXXECUPRO-C3-M4 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A-13 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A-19 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | SP-GND-1 | MAXXECUPRO-C1-L4 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | MAXXECUPRO-C2-H1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | MAXXECUPRO-C2-H2 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | MAXXECUPRO-C2-H3 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | MAXXECUPRO-C3-L4 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-A-5 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-A-6 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-0V-1 | MAXXECUPRO-C1-H1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-0V-1 | MAXXECUPRO-C1-H2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-0V-1 | MAXXECUPRO-C3-J2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-0V-1 | MAXXECUPRO-C3-J3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A-17 | MAXXECUPRO-C1-G1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A-18 | MAXXECUPRO-C1-H4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-A-4 | MAXXECUPRO-C4-F2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-A-25 | MAXXECUPRO-C1-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-A-12 | MAXXECUPRO-C1-K1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-A-7 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-SHD-1 | MAXXECUPRO-C3-C1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-A-3 | MAXXECUPRO-C1-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-A-21 | MAXXECUPRO-C1-J3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-A-10 | MAXXECUPRO-C1-F1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A-22 | MAXXECUPRO-C1-C4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-A-23 | MAXXECUPRO-C1-D4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-A-2 | MAXXECUPRO-C1-J4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-A-9 | MAXXECUPRO-C1-F2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-A-1 | MAXXECUPRO-C1-K3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A-11 | MAXXECUPRO-C3-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-A-16 | MAXXECUPRO-C1-K4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MAXXECUPRO-C1-G1 | MAXXECUPRO-C1-H1 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | MAXXECUPRO-C1-M4 | MAXXECUPRO-C1-H1 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | MAXXECUPRO-C1-L4 | MAXXECUPRO-C1-G1 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | MAXXECUPRO-C1-L4 | MAXXECUPRO-C1-M4 | open (OL) | power ground must not touch +12 V supply | |
| 5 | MAXXECUPRO-C1-M4 | MAXXECUPRO-C1-G1 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUPRO-C1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | GPO 5 | — | — | — | — | — | — | — | — |
| A2 | IGN 1 | — | W20 | — | 0.5 | OEM-A-25 | — | — | — |
| A3 | IGN 2 | — | — | — | — | — | — | — | — |
| A4 | GPO 8/TACHO | — | — | — | — | — | — | — | — |
| B1 | GPO 6 | — | — | — | — | — | — | — | — |
| B2 | IGN 3 | — | — | — | — | — | — | — | — |
| B3 | IGN 4 | — | — | — | — | — | — | — | — |
| B4 | GPO 1 | — | W24 | — | 0.5 | OEM-A-3 | — | — | — |
| C1 | GPO 7 | — | — | — | — | — | — | — | — |
| C2 | IGN 5 | — | — | — | — | — | — | — | — |
| C3 | IGN 6 | — | — | — | — | — | — | — | — |
| C4 | GPO 2 | — | W27 | — | 0.5 | OEM-A-22 | — | — | — |
| D1 | WBO2 Heater- | — | — | — | — | — | — | — | — |
| D2 | IGN 7 | — | — | — | — | — | — | — | — |
| D3 | IGN 8 | — | — | — | — | — | — | — | — |
| D4 | GPO 3 | — | W28 | — | 0.5 | OEM-A-23 | — | — | — |
| E1 | CAN H | — | — | — | — | — | — | — | — |
| E2 | CAN L | — | — | — | — | — | — | — | — |
| E3 | GND Shield | — | — | — | — | — | — | — | — |
| E4 | GPO 4 | — | — | — | — | — | — | — | — |
| F1 | CLT | — | W26 | — | 0.5 | OEM-A-10 | — | — | — |
| F2 | IAT | — | W30 | — | 0.5 | OEM-A-9 | — | — | — |
| F3 | WBO2 VREF | — | — | — | — | — | — | — | — |
| F4 | WBO2 VS | — | — | — | — | — | — | — | — |
| G1 | +5V sensor supply | — | W17 | — | 0.5 | OEM-A-17 | — | — | — |
| G2 | TPS/AIN | — | — | — | — | — | — | — | — |
| G3 | WBO2 IP | — | — | — | — | — | — | — | — |
| G4 | WBO2 RCAL | — | — | — | — | — | — | — | — |
| H1 | Sensor GND | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| H2 | Trigger GND | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| H3 | TRIGGER | — | — | — | — | — | — | — | — |
| H4 | HOME | — | W18 | — | 0.5 | OEM-A-18 | — | — | — |
| J1 | AIN 1 (temperature) | — | — | — | — | — | — | — | — |
| J2 | AIN 2 (temperature) | — | — | — | — | — | — | — | — |
| J3 | AIN 3 (0-5V) | — | W25 | — | 0.5 | OEM-A-21 | — | — | — |
| J4 | AIN 4 (0-5V) | — | W29 | — | 0.5 | OEM-A-2 | — | — | — |
| K1 | INJ 1 | — | W21 | — | 0.5 | OEM-A-12 | — | — | — |
| K2 | INJ 2 | — | — | — | — | — | — | — | — |
| K3 | DIN/VR 1 | — | W31 | — | 0.5 | OEM-A-1 | — | — | — |
| K4 | DIN/VR 2 | — | W33 | — | 0.5 | OEM-A-16 | — | — | — |
| L1 | INJ 8 | — | — | — | — | — | — | — | — |
| L2 | INJ 7 | — | — | — | — | — | — | — | — |
| L3 | INJ 6 | — | — | — | — | — | — | — | — |
| L4 | Engine GND | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| M1 | INJ 3 | — | — | — | — | — | — | — | — |
| M2 | INJ 4 | — | — | — | — | — | — | — | — |
| M3 | INJ 5 | — | — | — | — | — | — | — | — |
| M4 | +12V ECU power supply | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
MAXXECUPRO-C2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | EGT 1+ | — | — | — | — | — | — | — | — |
| A2 | EGT 2+ | — | — | — | — | — | — | — | — |
| A3 | EGT 3+ | — | — | — | — | — | — | — | — |
| A4 | EGT 4+ | — | — | — | — | — | — | — | — |
| B1 | EGT 1- | — | — | — | — | — | — | — | — |
| B2 | EGT 2- | — | — | — | — | — | — | — | — |
| B3 | EGT 3- | — | — | — | — | — | — | — | — |
| B4 | EGT 4- | — | — | — | — | — | — | — | — |
| C1 | EGT 5+ | — | — | — | — | — | — | — | — |
| C2 | EGT 6+ | — | — | — | — | — | — | — | — |
| C3 | EGT 7+ | — | — | — | — | — | — | — | — |
| C4 | EGT 8+ | — | — | — | — | — | — | — | — |
| D1 | EGT 5- | — | — | — | — | — | — | — | — |
| D2 | EGT 6- | — | — | — | — | — | — | — | — |
| D3 | EGT 7- | — | — | — | — | — | — | — | — |
| D4 | EGT 8- | — | — | — | — | — | — | — | — |
| E1 | EGT 9+ | — | — | — | — | — | — | — | — |
| E2 | EGT 10+ | — | — | — | — | — | — | — | — |
| E3 | EGT 11+ | — | — | — | — | — | — | — | — |
| E4 | EGT 12+ | — | — | — | — | — | — | — | — |
| F1 | EGT 9- | — | — | — | — | — | — | — | — |
| F2 | EGT 10- | — | — | — | — | — | — | — | — |
| F3 | EGT 11- | — | — | — | — | — | — | — | — |
| F4 | EGT 12- | — | — | — | — | — | — | — | — |
| H1 | Engine ground 3 | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| H2 | Engine ground 3 | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| H3 | Engine ground 3 | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUPRO-C3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | DIN/VR 4 | — | — | — | — | — | — | — | — |
| A2 | DIN/VR 5 | — | — | — | — | — | — | — | — |
| A3 | DIN 6 (SWITCH) | — | W32 | — | 0.5 | OEM-A-11 | — | — | — |
| A4 | DIN 7 (SWITCH) | — | — | — | — | — | — | — | — |
| B1 | WBO2 2 RCAL | — | — | — | — | — | — | — | — |
| B2 | WBO2 2 IP | — | — | — | — | — | — | — | — |
| B3 | WBO2 2 VS | — | — | — | — | — | — | — | — |
| B4 | WBO2 2 COM | — | — | — | — | — | — | — | — |
| C1 | WBO2 2 Shield | — | W23 | — | 0.5 | SP-SHD-1 | — | — | — |
| C2 | +5V SENSOR SUPPLY 2 | — | — | — | — | — | — | — | — |
| C3 | ANALOG IN 5 (0-5V) | — | — | — | — | — | — | — | — |
| C4 | GPO 19 (12V) | — | — | — | — | — | — | — | — |
| D1 | ANALOG IN 6 (0-5V) | — | — | — | — | — | — | — | — |
| D2 | ANALOG IN 7 (0-5V) | — | — | — | — | — | — | — | — |
| D3 | ANALOG IN 8 (0-5V) | — | — | — | — | — | — | — | — |
| D4 | GPO 20 (12V) | — | — | — | — | — | — | — | — |
| E1 | GPO 10/WBO2 2 HTR | — | — | — | — | — | — | — | — |
| E2 | ANALOG IN 9 (0-5V) | — | — | — | — | — | — | — | — |
| E3 | ANALOG IN 10 (0-5V) | — | — | — | — | — | — | — | — |
| E4 | GPO 21 (12V) | — | — | — | — | — | — | — | — |
| F1 | INJECTOR OUT 15 | — | — | — | — | — | — | — | — |
| F2 | ANALOG IN 11 (0-5V) | — | — | — | — | — | — | — | — |
| F3 | ANALOG IN 12 (0-5V) | — | — | — | — | — | — | — | — |
| F4 | GPO 22 (12V) | — | — | — | — | — | — | — | — |
| G1 | INJECTOR OUT 14 | — | — | — | — | — | — | — | — |
| G2 | IGNITION OUT 11 | — | — | — | — | — | — | — | — |
| G3 | IGNITION OUT 9 | — | — | — | — | — | — | — | — |
| G4 | GPO 15 (12V) | — | — | — | — | — | — | — | — |
| H1 | INJECTOR OUT 13 | — | — | — | — | — | — | — | — |
| H2 | IGNITION OUT 12 | — | — | — | — | — | — | — | — |
| H3 | IGNITION OUT 10 | — | — | — | — | — | — | — | — |
| H4 | GPO 16 (12V) | — | — | — | — | — | — | — | — |
| J1 | INJECTOR OUT 16 | — | — | — | — | — | — | — | — |
| J2 | SENSOR GND | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| J3 | SENSOR GND | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| J4 | GPO 17 (12V) | — | — | — | — | — | — | — | — |
| K1 | INJECTOR OUT 10 | — | — | — | — | — | — | — | — |
| K2 | INJECTOR OUT 9 | — | — | — | — | — | — | — | — |
| K3 | KEY IN 12V | — | — | — | — | — | — | — | — |
| K4 | GPO 18 (12V) | — | — | — | — | — | — | — | — |
| L1 | INJECTOR OUT 11 | — | — | — | — | — | — | — | — |
| L2 | GPO 12/MOTOR 1 + | — | — | — | — | — | — | — | — |
| L3 | GPO 11/MOTOR 1 - | — | — | — | — | — | — | — | — |
| L4 | ENGINE GROUND 2 | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| M1 | INJECTOR OUT 12 | — | — | — | — | — | — | — | — |
| M2 | GPO 13/MOTOR 2 + | — | — | — | — | — | — | — | — |
| M3 | GPO 14/MOTOR 2 - | — | — | — | — | — | — | — | — |
| M4 | 12V ECU 2 | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
MAXXECUPRO-C4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | CAN 2 H | — | — | — | — | — | — | — | — |
| A2 | CAN 2 L | — | — | — | — | — | — | — | — |
| A3 | 0-5V out 1 | — | — | — | — | — | — | — | — |
| A4 | 0-5V out 2 | — | — | — | — | — | — | — | — |
| B1 | AIN 18 (0-5V) | — | — | — | — | — | — | — | — |
| B2 | AIN 17 (0-5V) | — | — | — | — | — | — | — | — |
| B3 | AIN 16 (0-5V) | — | — | — | — | — | — | — | — |
| B4 | AIN 15 (0-5V) | — | — | — | — | — | — | — | — |
| C1 | AIN 14 (0-5V) | — | — | — | — | — | — | — | — |
| C2 | AIN 13 (0-5V) | — | — | — | — | — | — | — | — |
| C3 | AIN 19 (temp) | — | — | — | — | — | — | — | — |
| C4 | AIN 20 (temp) | — | — | — | — | — | — | — | — |
| D1 | AIN 21 (temp) | — | — | — | — | — | — | — | — |
| D2 | AIN 22 (temp) | — | — | — | — | — | — | — | — |
| D3 | DIN 8 (switch) | — | — | — | — | — | — | — | — |
| D4 | DIN 9 (switch) | — | — | — | — | — | — | — | — |
| E1 | DIN 10 (switch) | — | — | — | — | — | — | — | — |
| E2 | DIN 11 (switch) | — | — | — | — | — | — | — | — |
| E3 | +5V sensor supply 3 | — | — | — | — | — | — | — | — |
| E4 | 5-10V sensor supply | — | — | — | — | — | — | — | — |
| F1 | GPO 23-30 flyback | — | — | — | — | — | — | — | — |
| F2 | Knock 1 | — | W19 | — | 0.5 | OEM-A-4 | — | — | — |
| F3 | Knock 2 | — | — | — | — | — | — | — | — |
| F4 | Sensor GND3 / knock ground | — | — | — | — | — | — | — | — |
| G1 | GPO 23 | — | — | — | — | — | — | — | — |
| G2 | GPO 24 | — | — | — | — | — | — | — | — |
| G3 | GPO 25 | — | — | — | — | — | — | — | — |
| G4 | GPO 26 | — | — | — | — | — | — | — | — |
| H1 | GPO 27 | — | — | — | — | — | — | — | — |
| H2 | GPO 28 | — | — | — | — | — | — | — | — |
| H3 | GPO 29 | — | — | — | — | — | — | — | — |
| H4 | GPO 30 | — | — | — | — | — | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Starter signal (term 50) | — | W31 | — | 0.5 | MAXXECUPRO-C1-K3 | — | — | — |
| 10 | Coolant temperature sensor | — | W26 | — | 0.5 | MAXXECUPRO-C1-F1 | — | — | — |
| 11 | Idle/WOT throttle switch | — | W32 | — | 0.5 | MAXXECUPRO-C3-A3 | — | — | — |
| 12 | Injector driver (batch, all 4) | — | W21 | — | 0.5 | MAXXECUPRO-C1-K1 | — | — | — |
| 13 | Ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 14 | ECU power (control-unit relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 16 | A/C compressor signal | — | W33 | — | 0.5 | MAXXECUPRO-C1-K4 | — | — | — |
| 17 | AFM potentiometer supply | — | W17 | — | 0.5 | MAXXECUPRO-C1-G1 | — | — | — |
| 18 | Hall sender signal (engine speed) | — | W18 | — | 0.5 | MAXXECUPRO-C1-H4 | — | — | — |
| 19 | Ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 2 | Oxygen (lambda) sensor signal | — | W29 | — | 0.5 | MAXXECUPRO-C1-J4 | — | — | — |
| 21 | AFM signal | — | W25 | — | 0.5 | MAXXECUPRO-C1-J3 | — | — | — |
| 22 | Idle stabilizer valve coil 1 | — | W27 | — | 0.5 | MAXXECUPRO-C1-C4 | — | — | — |
| 23 | Idle stabilizer valve coil 2 | — | W28 | — | 0.5 | MAXXECUPRO-C1-D4 | — | — | — |
| 25 | Ignition timing signal to TCI | — | W20 | — | 0.5 | MAXXECUPRO-C1-A2 | — | — | — |
| 3 | Fuel pump relay control | — | W24 | — | 0.5 | MAXXECUPRO-C1-B4 | — | — | — |
| 4 | Knock sensor signal | — | W19 | — | 0.5 | MAXXECUPRO-C4-F2 | — | — | — |
| 5 | Knock sensor return | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 6 | Sensor ground (CTS/Hall/AFM/throttle) | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | Knock sensor shield | — | W22 | — | 0.5 | SP-SHD-1 | — | — | — |
| 8 | Hall sender supply (distributor) | — | — | — | — | — | — | — | — |
| 9 | Intake air temperature sensor | — | W30 | — | 0.5 | MAXXECUPRO-C1-F2 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W11 | — | 0.5 | OEM-A-5 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-A-6 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | MAXXECUPRO-C1-H1 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | MAXXECUPRO-C1-H2 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | MAXXECUPRO-C3-J2 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | MAXXECUPRO-C3-J3 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-14 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | MAXXECUPRO-C1-M4 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MAXXECUPRO-C3-M4 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-A-13 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-A-19 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | MAXXECUPRO-C1-L4 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | MAXXECUPRO-C2-H1 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | MAXXECUPRO-C2-H2 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | MAXXECUPRO-C2-H3 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | MAXXECUPRO-C3-L4 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W22 | — | 0.5 | OEM-A-7 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | MAXXECUPRO-C3-C1 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Starter signal (term 50) | digital_in | MAXXECUPRO-C1-K3 | DIN/VR 1 | digital_in | corroborated | |
| OEM-A-10 | Coolant temperature sensor | temp_in | MAXXECUPRO-C1-F1 | CLT | temp_in | corroborated | |
| OEM-A-11 | Idle/WOT throttle switch | digital_in | MAXXECUPRO-C3-A3 | DIN 6 (SWITCH) | digital_in | corroborated | |
| OEM-A-12 | Injector driver (batch, all 4) | injector_out | MAXXECUPRO-C1-K1 | INJ 1 | injector_out | corroborated | |
| OEM-A-13 | Ground | ground | MAXXECUPRO-C1-L4 + MAXXECUPRO-C2-H1 + MAXXECUPRO-C2-H2 + MAXXECUPRO-C2-H3 + MAXXECUPRO-C3-L4 | Engine GND + Engine ground 3 + Engine ground 3 + Engine ground 3 + ENGINE GROUND 2 | ground | corroborated | |
| OEM-A-14 | ECU power (control-unit relay) | power_in | MAXXECUPRO-C1-M4 + MAXXECUPRO-C3-M4 | +12V ECU power supply + 12V ECU 2 | power_in | corroborated | |
| OEM-A-16 | A/C compressor signal | digital_in | MAXXECUPRO-C1-K4 | DIN/VR 2 | digital_in | corroborated | |
| OEM-A-17 | AFM potentiometer supply | vref | MAXXECUPRO-C1-G1 | +5V sensor supply | vref | corroborated | |
| OEM-A-18 | Hall sender signal (engine speed) | trigger_in | MAXXECUPRO-C1-H4 | HOME | trigger_in | corroborated | |
| OEM-A-19 | Ground | ground | MAXXECUPRO-C1-L4 + MAXXECUPRO-C2-H1 + MAXXECUPRO-C2-H2 + MAXXECUPRO-C2-H3 + MAXXECUPRO-C3-L4 | Engine GND + Engine ground 3 + Engine ground 3 + Engine ground 3 + ENGINE GROUND 2 | ground | corroborated | |
| OEM-A-2 | Oxygen (lambda) sensor signal | lambda_nb_in | MAXXECUPRO-C1-J4 | AIN 4 (0-5V) | analog_in | corroborated | |
| OEM-A-21 | AFM signal | analog_in | MAXXECUPRO-C1-J3 | AIN 3 (0-5V) | analog_in | corroborated | |
| OEM-A-22 | Idle stabilizer valve coil 1 | low_side_out | MAXXECUPRO-C1-C4 | GPO 2 | low_side_out | corroborated | |
| OEM-A-23 | Idle stabilizer valve coil 2 | low_side_out | MAXXECUPRO-C1-D4 | GPO 3 | low_side_out | corroborated | |
| OEM-A-25 | Ignition timing signal to TCI | ignition_out | MAXXECUPRO-C1-A2 | IGN 1 | ignition_out | corroborated | |
| OEM-A-3 | Fuel pump relay control | low_side_out | MAXXECUPRO-C1-B4 | GPO 1 | low_side_out | corroborated | |
| OEM-A-4 | Knock sensor signal | knock_in | MAXXECUPRO-C4-F2 | Knock 1 | knock_in | corroborated | |
| OEM-A-5 | Knock sensor return | sensor_ground | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-A-6 | Sensor ground (CTS/Hall/AFM/throttle) | sensor_ground | MAXXECUPRO-C1-H1 + MAXXECUPRO-C1-H2 + MAXXECUPRO-C3-J2 + MAXXECUPRO-C3-J3 | Sensor GND + Trigger GND + SENSOR GND + SENSOR GND | sensor_ground | corroborated | |
| OEM-A-7 | Knock sensor shield | shield | MAXXECUPRO-C3-C1 | WBO2 2 Shield | shield | corroborated | |
| OEM-A-8 | Hall sender supply (distributor) | power_in | — | — | — | corroborated | |
| OEM-A-9 | Intake air temperature sensor | temp_in | MAXXECUPRO-C1-F2 | IAT | temp_in | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-14 | SP-14V-1 | 0.85 | no route | ECU power (control-unit relay) | — | |
| W2 | SP-14V-1 | MAXXECUPRO-C1-M4 | 0.85 | no route | +12V ECU power supply | — | |
| W3 | SP-14V-1 | MAXXECUPRO-C3-M4 | 0.85 | no route | 12V ECU 2 | — | |
| W4 | OEM-A-13 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W5 | OEM-A-19 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W6 | SP-GND-1 | MAXXECUPRO-C1-L4 | 0.85 | no route | Engine GND | — | |
| W7 | SP-GND-1 | MAXXECUPRO-C2-H1 | 0.85 | no route | Engine ground 3 | — | |
| W8 | SP-GND-1 | MAXXECUPRO-C2-H2 | 0.85 | no route | Engine ground 3 | — | |
| W9 | SP-GND-1 | MAXXECUPRO-C2-H3 | 0.85 | no route | Engine ground 3 | — | |
| W10 | SP-GND-1 | MAXXECUPRO-C3-L4 | 0.85 | no route | ENGINE GROUND 2 | — | |
| W11 | OEM-A-5 | SP-0V-1 | 0.5 | no route | Knock sensor return | — | |
| W12 | OEM-A-6 | SP-0V-1 | 0.5 | no route | Sensor ground (CTS/Hall/AFM/throttle) | — | |
| W13 | SP-0V-1 | MAXXECUPRO-C1-H1 | 0.5 | no route | Sensor GND | — | |
| W14 | SP-0V-1 | MAXXECUPRO-C1-H2 | 0.5 | no route | Trigger GND | — | |
| W15 | SP-0V-1 | MAXXECUPRO-C3-J2 | 0.5 | no route | SENSOR GND | — | |
| W16 | SP-0V-1 | MAXXECUPRO-C3-J3 | 0.5 | no route | SENSOR GND | — | |
| W17 | OEM-A-17 | MAXXECUPRO-C1-G1 | 0.5 | no route | AFM potentiometer supply | — | |
| W18 | OEM-A-18 | MAXXECUPRO-C1-H4 | 0.5 | no route | Hall sender signal (engine speed) | — | |
| W19 | OEM-A-4 | MAXXECUPRO-C4-F2 | 0.5 | no route | Knock sensor signal | — | |
| W20 | OEM-A-25 | MAXXECUPRO-C1-A2 | 0.5 | no route | Ignition timing signal to TCI | — | |
| W21 | OEM-A-12 | MAXXECUPRO-C1-K1 | 0.5 | no route | Injector driver (batch, all 4) | — | |
| W22 | OEM-A-7 | SP-SHD-1 | 0.5 | no route | Knock sensor shield | — | |
| W23 | SP-SHD-1 | MAXXECUPRO-C3-C1 | 0.5 | no route | WBO2 2 Shield | — | |
| W24 | OEM-A-3 | MAXXECUPRO-C1-B4 | 0.5 | no route | Fuel pump relay control | — | |
| W25 | OEM-A-21 | MAXXECUPRO-C1-J3 | 0.5 | no route | AFM signal | — | |
| W26 | OEM-A-10 | MAXXECUPRO-C1-F1 | 0.5 | no route | Coolant temperature sensor | — | |
| W27 | OEM-A-22 | MAXXECUPRO-C1-C4 | 0.5 | no route | Idle stabilizer valve coil 1 | — | |
| W28 | OEM-A-23 | MAXXECUPRO-C1-D4 | 0.5 | no route | Idle stabilizer valve coil 2 | — | |
| W29 | OEM-A-2 | MAXXECUPRO-C1-J4 | 0.5 | no route | Oxygen (lambda) sensor signal | — | |
| W30 | OEM-A-9 | MAXXECUPRO-C1-F2 | 0.5 | no route | Intake air temperature sensor | — | |
| W31 | OEM-A-1 | MAXXECUPRO-C1-K3 | 0.5 | no route | Starter signal (term 50) | — | |
| W32 | OEM-A-11 | MAXXECUPRO-C3-A3 | 0.5 | no route | Idle/WOT throttle switch | — | |
| W33 | OEM-A-16 | MAXXECUPRO-C1-K4 | 0.5 | no route | A/C compressor signal | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (2)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-A-8 | Required OEM function "Hall sender supply (distributor)" (power_in) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | MAXXECUPRO-C1-B4 | MAXXECUPRO-C1-B4 "GPO 1" drives OEM-A-3 Fuel pump relay control (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for VW Digifant not found in the ECU's docs (No OEM-named Digifant pattern; distributor via generic "Distributor" mode only.) Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-A 8: Hall sender supply (distributor): no rule for class sensor_supply_in; wire by hand Not wired: - MAXXECUPRO-C3 K3: KEY IN 12V: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | MaxxECU GEN1 pinout (MINI / STREET / SPORT / V1 / RACE / PRO) | http://www.maxxecu.com/webhelp/wirings-maxxecu_pinout.html | archive | 2026-10-05 | 2e37b6814690 |
| 2 | community_copy | a2resource: Digifant II engine controller pinout (VW Golf/Jetta Mk2 1.8 8v) | http://www.a2resource.com/electrical/management/digifant2.html | — | — | — |
| 2 | community_copy | drive2.ru: VW Golf Mk2 PF Digifant II ECU pinout | https://www.drive2.ru/l/9886121 | — | — | — |