AP2 2006–09 (F22C1, DBW) → Link G5 Voodoo Pro V1 (auto)
AP2 2006–09 (F22C1, DBW) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 11: read the Findings page before cutting any wire |
| Size of the job | 59 wires · 10 connectors · 5 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-A-8 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-A-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A-20 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A-21 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-E-5 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | TB-J-VCC | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-A-7 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-A-6 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-A-1 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-A-16 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-A-15 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A-14 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A-13 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-B-5 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B-4 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B-3 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-B-2 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | TB-J-M- | G5VOODOOPROV-B-B26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | TB-J-M+ | G5VOODOOPROV-B-B18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-E-17 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E-7 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-B-6 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A-30 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-A-25 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-A-26 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-B-8 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | TB-J-TPS1 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | TB-J-TPS2 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E-9 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-D-15 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E-12 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E-18 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E-8 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E-21 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-10 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-B-15 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-B-18 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-B-21 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E-19 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E-20 | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E-1 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-B-17 | G5VOODOOPROV-B-B6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-B-13 | G5VOODOOPROV-B-B16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E-14 | G5VOODOOPROV-B-B23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E-15 | G5VOODOOPROV-B-B24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E-16 | G5VOODOOPROV-B-B31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A-18 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-B-11 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-D-1 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-D-4 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-D-7 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-D-8 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-D-9 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E-22 | G5VOODOOPROV-B-B29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E-28 | G5VOODOOPROV-B-B28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | OEM-A-4 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W21 | — | 0.5 | OEM-B-2 | — | — | — |
| A10 | Ignition 4 | — | W17 | — | 0.5 | OEM-A-13 | — | — | — |
| A11 | Ignition 3 | — | W16 | — | 0.5 | OEM-A-14 | — | — | — |
| A12 | Ignition 2 | — | W15 | — | 0.5 | OEM-A-15 | — | — | — |
| A13 | Ignition 1 | — | W14 | — | 0.5 | OEM-A-16 | — | — | — |
| A14 | Analogue Volt 4 | — | W31 | — | 0.5 | TB-J-TPS1 | — | — | — |
| A15 | Analogue Temp 1 | — | W30 | — | 0.5 | OEM-B-8 | — | — | — |
| A16 | Analogue Temp 2 | — | W45 | — | 0.5 | OEM-E-1 | — | — | — |
| A17 | Analogue Volt 1 | — | W27 | — | 0.5 | OEM-A-30 | — | — | — |
| A18 | Aux 4 | — | W35 | — | 0.5 | OEM-E-12 | — | — | — |
| A19 | Aux 3 | — | W34 | — | 0.5 | OEM-D-15 | — | — | — |
| A2 | Injection 3 | — | W20 | — | 0.5 | OEM-B-3 | — | — | — |
| A20 | Aux 2 | — | W25 | — | 0.5 | OEM-E-7 | — | — | — |
| A21 | Aux 1 | — | W24 | — | 0.5 | OEM-E-17 | — | — | — |
| A22 | Analogue Volt 2 | — | W28 | — | 0.5 | OEM-A-25 | — | — | — |
| A23 | Digital Input 3 | — | W53 | — | 0.5 | OEM-D-1 | — | — | — |
| A26 | Aux 8 | — | W40 | — | 0.5 | OEM-B-15 | — | — | — |
| A27 | Aux 7 | — | W39 | — | 0.5 | OEM-A-10 | — | — | — |
| A28 | Aux 6 | — | W38 | — | 0.5 | OEM-E-21 | — | — | — |
| A29 | Aux 5 | — | W26 | — | 0.5 | OEM-B-6 | — | — | — |
| A3 | Injection 2 | — | W19 | — | 0.5 | OEM-B-4 | — | — | — |
| A30 | Digital Input 1 | — | W51 | — | 0.5 | OEM-A-18 | — | — | — |
| A31 | Digital Input 2 | — | W52 | — | 0.5 | OEM-B-11 | — | — | — |
| A32 | +5V Out | — | W10 | — | 0.5 | SP-5V1-1 | — | — | — |
| A33 | Analogue Volt 3 | — | W29 | — | 0.5 | OEM-A-26 | — | — | — |
| A4 | Injection 1 | — | W18 | — | 0.5 | OEM-B-5 | — | — | — |
| A6 | Ignition Switch | — | W33 | — | 0.5 | OEM-E-9 | — | — | — |
| A8 | Trigger 1 | — | W11 | — | 0.5 | OEM-A-7 | — | — | — |
| A9 | Trigger 2 | — | W12 | — | 0.5 | OEM-A-6 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | — | — | — | — | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | — | — | — | — | — | — | — |
| B13 | Ignition 5 | — | — | — | — | — | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | W44 | — | 0.5 | OEM-E-20 | — | — | — |
| B16 | Analogue Volt 7 | — | W47 | — | 0.5 | OEM-B-13 | — | — | — |
| B18 | Aux 9 | — | W23 | — | 0.5 | TB-J-M+ | — | — | — |
| B19 | Digital Input 6 | — | W56 | — | 0.5 | OEM-D-8 | — | — | — |
| B2 | Injection 7 | — | W43 | — | 0.5 | OEM-E-19 | — | — | — |
| B20 | Digital Input 5 | — | W55 | — | 0.5 | OEM-D-7 | — | — | — |
| B21 | Digital Input 4 | — | W54 | — | 0.5 | OEM-D-4 | — | — | — |
| B23 | Analogue Volt 8 | — | W48 | — | 0.5 | OEM-E-14 | — | — | — |
| B24 | Analogue Volt 9 | — | W49 | — | 0.5 | OEM-E-15 | — | — | — |
| B26 | Aux 10 | — | W22 | — | 0.5 | TB-J-M- | — | — | — |
| B27 | Digital Input 10 | — | — | — | — | — | — | — | — |
| B28 | Digital Input 9 | — | W59 | — | 0.5 | OEM-E-28 | — | — | — |
| B29 | Digital Input 8 | — | W58 | — | 0.5 | OEM-E-22 | — | — | — |
| B3 | Injection 6 | — | W42 | — | 0.5 | OEM-B-21 | — | — | — |
| B30 | Digital Input 7 | — | W57 | — | 0.5 | OEM-D-9 | — | — | — |
| B31 | Analogue Volt 10 | — | W50 | — | 0.5 | OEM-E-16 | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | W32 | — | 0.5 | TB-J-TPS2 | — | — | — |
| B4 | Injection 5 | — | W41 | — | 0.5 | OEM-B-18 | — | — | — |
| B6 | Analogue Temp 3 | — | W46 | — | 0.5 | OEM-B-17 | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | — | — | — | — | — | — | — |
| B9 | Knock 1 | — | W13 | — | 0.5 | OEM-A-1 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W36 | — | 0.5 | OEM-E-18 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | — | — | — | — | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W37 | — | 0.5 | OEM-E-8 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | — | — | — | — | — | — | — |
| E4 | Injection 9 | — | — | — | — | — | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
OEM-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Knock sensor | — | W13 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 2 | Ignition power 2 | — | — | — | — | — | — | — | — |
| 3 | Ignition power 1 | — | — | — | — | — | — | — | — |
| 4 | Power ground 2 | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground 1 | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Cam position sensor (T2) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 7 | Crank position sensor (T1) | — | W11 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 8 | Logic ground 2 | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Logic ground 1 | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | A/F sensor heater | — | W39 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 11 | Unused cavity | — | — | — | — | — | — | — | — |
| 12 | Unused cavity | — | — | — | — | — | — | — | — |
| 13 | Ignition coil 4 | — | W17 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 14 | Ignition coil 3 | — | W16 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 15 | Ignition coil 2 | — | W15 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 16 | Ignition coil 1 | — | W14 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 17 | Unused cavity | — | — | — | — | — | — | — | — |
| 18 | Vehicle speed sensor | — | W51 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 19 | Unused cavity | — | — | — | — | — | — | — | — |
| 20 | Sensor voltage 2 | — | W6 | — | 0.5 | SP-5V1-1 | — | — | — |
| 21 | Sensor voltage 1 | — | W7 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Unused cavity | — | — | — | — | — | — | — | — |
| 23 | Sensor ground 2 | — | — | — | — | — | — | — | — |
| 24 | Sensor ground 1 | — | — | — | — | — | — | — | — |
| 25 | Accelerator pedal position B | — | W28 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 26 | Accelerator pedal position A | — | W29 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 27 | Unused cavity | — | — | — | — | — | — | — | — |
| 28 | A/F sensor signal − | — | — | — | — | — | — | — | — |
| 29 | Unused cavity | — | — | — | — | — | — | — | — |
| 30 | MAP sensor | — | W27 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 31 | A/F sensor signal + | — | — | — | — | — | — | — | — |
OEM-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Unused cavity | — | — | — | — | — | — | — | — |
| 2 | Injector 4 | — | W21 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 3 | Injector 3 | — | W20 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 4 | Injector 2 | — | W19 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 5 | Injector 1 | — | W18 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 6 | VTEC solenoid | — | W26 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 7 | Unused cavity | — | — | — | — | — | — | — | — |
| 8 | Coolant temp sensor | — | W30 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 9 | Unused cavity | — | — | — | — | — | — | — | — |
| 10 | Alternator L signal | — | — | — | — | — | — | — | — |
| 11 | VTEC oil pressure switch | — | W52 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 12 | Unused cavity | — | — | — | — | — | — | — | — |
| 13 | Alternator FR signal | — | W47 | — | 0.5 | G5VOODOOPROV-B-B16 | — | — | — |
| 14 | Unused cavity | — | — | — | — | — | — | — | — |
| 15 | Engine mount control solenoid | — | W40 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 16 | Unused cavity | — | — | — | — | — | — | — | — |
| 17 | Intake air temp sensor | — | W46 | — | 0.5 | G5VOODOOPROV-B-B6 | — | — | — |
| 18 | Alternator control | — | W41 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 19 | Throttle actuator command to throttle control module (SEFD) | — | — | — | — | — | — | — | — |
| 20 | Throttle actuator command to throttle control module (SEDF) | — | — | — | — | — | — | — | — |
| 21 | Evap canister purge valve | — | W42 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 22 | Unused cavity | — | — | — | — | — | — | — | — |
| 23 | Unused cavity | — | — | — | — | — | — | — | — |
| 24 | Unused cavity | — | — | — | — | — | — | — | — |
OEM-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Cruise set switch | — | W53 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 2 | Unused cavity | — | — | — | — | — | — | — | — |
| 3 | Unused cavity | — | — | — | — | — | — | — | — |
| 4 | Cruise main switch | — | W54 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 5 | Unused cavity | — | — | — | — | — | — | — | — |
| 6 | Unused cavity | — | — | — | — | — | — | — | — |
| 7 | Cruise resume switch | — | W55 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
| 8 | Brake pedal position switch | — | W56 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 9 | Cruise clutch signal | — | W57 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 10 | Unused cavity | — | — | — | — | — | — | — | — |
| 11 | Unused cavity | — | — | — | — | — | — | — | — |
| 12 | Unused cavity | — | — | — | — | — | — | — | — |
| 13 | Unused cavity | — | — | — | — | — | — | — | — |
| 14 | Unused cavity | — | — | — | — | — | — | — | — |
| 15 | Throttle actuator relay | — | W34 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 16 | Unused cavity | — | — | — | — | — | — | — | — |
| 17 | Unused cavity | — | — | — | — | — | — | — | — |
OEM-E
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Coolant temp sensor 2 | — | W45 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 2 | Unused cavity | — | — | — | — | — | — | — | — |
| 3 | Logic ground 3 | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Sensor ground 3 | — | — | — | — | — | — | — | — |
| 5 | Sensor voltage 3 | — | W8 | — | 0.5 | SP-5V1-1 | — | — | — |
| 6 | Unused cavity | — | — | — | — | — | — | — | — |
| 7 | Main relay control | — | W25 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 8 | A/F sensor heater relay | — | W37 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 9 | Ignition signal | — | W33 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
| 10 | Unused cavity | — | — | — | — | — | — | — | — |
| 11 | CAN H | — | — | — | — | — | — | — | — |
| 12 | Radiator fan control | — | W35 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 13 | Multiplex communication | — | — | — | — | — | — | — | — |
| 14 | Fuel tank pressure sensor | — | W48 | — | 0.5 | G5VOODOOPROV-B-B23 | — | — | — |
| 15 | Electrical load detector | — | W49 | — | 0.5 | G5VOODOOPROV-B-B24 | — | — | — |
| 16 | Power steering load detector | — | W50 | — | 0.5 | G5VOODOOPROV-B-B31 | — | — | — |
| 17 | Fuel pump relay | — | W24 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 18 | A/C clutch relay | — | W36 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 19 | Evap canister vent shut valve | — | W43 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 20 | Secondary O2 sensor | — | W44 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| 21 | Secondary O2 heater | — | W38 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 22 | Brake pedal switch | — | W58 | — | 0.5 | G5VOODOOPROV-B-B29 | — | — | — |
| 23 | Unused cavity | — | — | — | — | — | — | — | — |
| 24 | CAN L | — | — | — | — | — | — | — | — |
| 25 | Engine speed pulse (tacho) | — | — | — | — | — | — | — | — |
| 26 | Vehicle speed output | — | — | — | — | — | — | — | — |
| 27 | Immobilizer code | — | — | — | — | — | — | — | — |
| 28 | A/C switch signal | — | W59 | — | 0.5 | G5VOODOOPROV-B-B28 | — | — | — |
| 29 | Service check signal | — | — | — | — | — | — | — | — |
| 30 | Write enable signal | — | — | — | — | — | — | — | — |
| 31 | Unused cavity | — | — | — | — | — | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W8 | — | 0.5 | OEM-E-5 | — | — | — |
| 1 | — | — | W6 | — | 0.5 | OEM-A-20 | — | — | — |
| 1 | — | — | W7 | — | 0.5 | OEM-A-21 | — | — | — |
| 1 | — | — | W9 | — | 0.5 | TB-J-VCC | — | — | — |
| 1 | — | — | W10 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W2 | — | 0.85 | OEM-A-5 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-A-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-A-9 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-E-3 | — | — | — |
| 1 | — | — | W1 | — | 0.85 | OEM-A-4 | — | — | — |
TB-J
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TPS1 | Throttle position 1 | — | W31 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| VCC | Throttle sensor 5V supply | — | W9 | — | 0.5 | SP-5V1-1 | — | — | — |
| TPS2 | Throttle position 2 | — | W32 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
| GND | Throttle sensor ground | — | — | — | — | — | — | — | — |
| M- | Throttle motor − | — | W22 | — | 0.5 | G5VOODOOPROV-B-B26 | — | — | — |
| M+ | Throttle motor + | — | W23 | — | 0.5 | G5VOODOOPROV-B-B18 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Knock sensor | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | single_source | |
| OEM-A-10 | A/F sensor heater | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | single_source | |
| OEM-A-11 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-12 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-13 | Ignition coil 4 | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | single_source | |
| OEM-A-14 | Ignition coil 3 | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | single_source | |
| OEM-A-15 | Ignition coil 2 | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | single_source | |
| OEM-A-16 | Ignition coil 1 | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | single_source | |
| OEM-A-17 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-18 | Vehicle speed sensor | digital_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | single_source | |
| OEM-A-19 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-2 | Ignition power 2 | power_in | — | — | — | single_source | |
| OEM-A-20 | Sensor voltage 2 | vref | G5VOODOOPROV-A-A32 + TB-J-VCC | +5V Out + Throttle sensor 5V supply | power_in + vref | corroborated | |
| OEM-A-21 | Sensor voltage 1 | vref | G5VOODOOPROV-A-A32 + TB-J-VCC | +5V Out + Throttle sensor 5V supply | power_in + vref | single_source | |
| OEM-A-22 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-23 | Sensor ground 2 | sensor_ground | — | — | — | corroborated | |
| OEM-A-24 | Sensor ground 1 | sensor_ground | — | — | — | single_source | |
| OEM-A-25 | Accelerator pedal position B | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | corroborated | |
| OEM-A-26 | Accelerator pedal position A | analog_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | corroborated | |
| OEM-A-27 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-28 | A/F sensor signal − | — | — | — | — | single_source | |
| OEM-A-29 | Unused cavity | — | — | — | — | unverified | |
| OEM-A-3 | Ignition power 1 | power_in | — | — | — | single_source | |
| OEM-A-30 | MAP sensor | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-A-31 | A/F sensor signal + | — | — | — | — | single_source | |
| OEM-A-4 | Power ground 2 | ground | — | — | — | single_source | |
| OEM-A-5 | Power ground 1 | ground | — | — | — | single_source | |
| OEM-A-6 | Cam position sensor (T2) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | single_source | |
| OEM-A-7 | Crank position sensor (T1) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | single_source | |
| OEM-A-8 | Logic ground 2 | ground | — | — | — | single_source | |
| OEM-A-9 | Logic ground 1 | ground | — | — | — | single_source | |
| OEM-B-1 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-10 | Alternator L signal | — | — | — | — | single_source | |
| OEM-B-11 | VTEC oil pressure switch | digital_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | single_source | |
| OEM-B-12 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-13 | Alternator FR signal | analog_in | G5VOODOOPROV-B-B16 | Analogue Volt 7 | analog_in | single_source | |
| OEM-B-14 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-15 | Engine mount control solenoid | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | single_source | |
| OEM-B-16 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-17 | Intake air temp sensor | temp_in | G5VOODOOPROV-B-B6 | Analogue Temp 3 | temp_in | single_source | |
| OEM-B-18 | Alternator control | low_side_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | single_source | |
| OEM-B-19 | Throttle actuator command to throttle control module (SEFD) | — | — | — | — | conflict | |
| OEM-B-2 | Injector 4 | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | single_source | |
| OEM-B-20 | Throttle actuator command to throttle control module (SEDF) | — | — | — | — | conflict | |
| OEM-B-21 | Evap canister purge valve | low_side_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | single_source | |
| OEM-B-22 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-23 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-24 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-3 | Injector 3 | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | single_source | |
| OEM-B-4 | Injector 2 | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | single_source | |
| OEM-B-5 | Injector 1 | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | single_source | |
| OEM-B-6 | VTEC solenoid | high_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | single_source | |
| OEM-B-7 | Unused cavity | — | — | — | — | unverified | |
| OEM-B-8 | Coolant temp sensor | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | single_source | |
| OEM-B-9 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-1 | Cruise set switch | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-D-10 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-11 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-12 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-13 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-14 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-15 | Throttle actuator relay | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | single_source | |
| OEM-D-16 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-17 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-2 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-3 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-4 | Cruise main switch | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-D-5 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-6 | Unused cavity | — | — | — | — | unverified | |
| OEM-D-7 | Cruise resume switch | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-D-8 | Brake pedal position switch | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-D-9 | Cruise clutch signal | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-E-1 | Coolant temp sensor 2 | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | single_source | |
| OEM-E-10 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-11 | CAN H | can_h | — | — | — | single_source | |
| OEM-E-12 | Radiator fan control | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | single_source | |
| OEM-E-13 | Multiplex communication | serial | — | — | — | single_source | |
| OEM-E-14 | Fuel tank pressure sensor | analog_in | G5VOODOOPROV-B-B23 | Analogue Volt 8 | analog_in | single_source | |
| OEM-E-15 | Electrical load detector | analog_in | G5VOODOOPROV-B-B24 | Analogue Volt 9 | analog_in | single_source | |
| OEM-E-16 | Power steering load detector | analog_in | G5VOODOOPROV-B-B31 | Analogue Volt 10 | analog_in | corroborated | |
| OEM-E-17 | Fuel pump relay | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | single_source | |
| OEM-E-18 | A/C clutch relay | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-E-19 | Evap canister vent shut valve | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-E-2 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-20 | Secondary O2 sensor | lambda_nb_in | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_in | single_source | |
| OEM-E-21 | Secondary O2 heater | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | single_source | |
| OEM-E-22 | Brake pedal switch | digital_in | G5VOODOOPROV-B-B29 | Digital Input 8 | digital_in | single_source | |
| OEM-E-23 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-24 | CAN L | can_l | — | — | — | single_source | |
| OEM-E-25 | Engine speed pulse (tacho) | tacho_out | — | — | — | single_source | |
| OEM-E-26 | Vehicle speed output | tacho_out | — | — | — | single_source | |
| OEM-E-27 | Immobilizer code | — | — | — | — | single_source | |
| OEM-E-28 | A/C switch signal | digital_in | G5VOODOOPROV-B-B28 | Digital Input 9 | digital_in | single_source | |
| OEM-E-29 | Service check signal | — | — | — | — | single_source | |
| OEM-E-3 | Logic ground 3 | ground | — | — | — | single_source | |
| OEM-E-30 | Write enable signal | — | — | — | — | single_source | |
| OEM-E-31 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-4 | Sensor ground 3 | sensor_ground | — | — | — | corroborated | |
| OEM-E-5 | Sensor voltage 3 | vref | G5VOODOOPROV-A-A32 + TB-J-VCC | +5V Out + Throttle sensor 5V supply | power_in + vref | corroborated | |
| OEM-E-6 | Unused cavity | — | — | — | — | unverified | |
| OEM-E-7 | Main relay control | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | single_source | |
| OEM-E-8 | A/F sensor heater relay | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source | |
| OEM-E-9 | Ignition signal | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-4 | SP-GND-1 | 0.85 | no route | Power ground 2 | — | |
| W2 | OEM-A-5 | SP-GND-1 | 0.85 | no route | Power ground 1 | — | |
| W3 | OEM-A-8 | SP-GND-1 | 0.85 | no route | Logic ground 2 | — | |
| W4 | OEM-A-9 | SP-GND-1 | 0.85 | no route | Logic ground 1 | — | |
| W5 | OEM-E-3 | SP-GND-1 | 0.85 | no route | Logic ground 3 | — | |
| W6 | OEM-A-20 | SP-5V1-1 | 0.5 | no route | Sensor voltage 2 | — | |
| W7 | OEM-A-21 | SP-5V1-1 | 0.5 | no route | Sensor voltage 1 | — | |
| W8 | OEM-E-5 | SP-5V1-1 | 0.5 | no route | Sensor voltage 3 | — | |
| W9 | TB-J-VCC | SP-5V1-1 | 0.5 | no route | Throttle sensor 5V supply | — | |
| W10 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | no route | +5V Out | — | |
| W11 | OEM-A-7 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position sensor (T1) | — | |
| W12 | OEM-A-6 | G5VOODOOPROV-A-A9 | 0.5 | no route | Cam position sensor (T2) | — | |
| W13 | OEM-A-1 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor | — | |
| W14 | OEM-A-16 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition coil 1 | — | |
| W15 | OEM-A-15 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition coil 2 | — | |
| W16 | OEM-A-14 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition coil 3 | — | |
| W17 | OEM-A-13 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition coil 4 | — | |
| W18 | OEM-B-5 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 | — | |
| W19 | OEM-B-4 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 | — | |
| W20 | OEM-B-3 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 | — | |
| W21 | OEM-B-2 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4 | — | |
| W22 | TB-J-M- | G5VOODOOPROV-B-B26 | 0.5 | no route | Throttle motor − | — | |
| W23 | TB-J-M+ | G5VOODOOPROV-B-B18 | 0.5 | no route | Throttle motor + | — | |
| W24 | OEM-E-17 | G5VOODOOPROV-A-A21 | 0.5 | no route | Fuel pump relay | — | |
| W25 | OEM-E-7 | G5VOODOOPROV-A-A20 | 0.5 | no route | Main relay control | — | |
| W26 | OEM-B-6 | G5VOODOOPROV-A-A29 | 0.5 | no route | VTEC solenoid | — | |
| W27 | OEM-A-30 | G5VOODOOPROV-A-A17 | 0.5 | no route | MAP sensor | — | |
| W28 | OEM-A-25 | G5VOODOOPROV-A-A22 | 0.5 | no route | Accelerator pedal position B | — | |
| W29 | OEM-A-26 | G5VOODOOPROV-A-A33 | 0.5 | no route | Accelerator pedal position A | — | |
| W30 | OEM-B-8 | G5VOODOOPROV-A-A15 | 0.5 | no route | Coolant temp sensor | — | |
| W31 | TB-J-TPS1 | G5VOODOOPROV-A-A14 | 0.5 | no route | Throttle position 1 | — | |
| W32 | TB-J-TPS2 | G5VOODOOPROV-B-B33 | 0.5 | no route | Throttle position 2 | — | |
| W33 | OEM-E-9 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition signal | — | |
| W34 | OEM-D-15 | G5VOODOOPROV-A-A19 | 0.5 | no route | Throttle actuator relay | — | |
| W35 | OEM-E-12 | G5VOODOOPROV-A-A18 | 0.5 | no route | Radiator fan control | — | |
| W36 | OEM-E-18 | G5VOODOOPROV-E-E15 | 0.5 | no route | A/C clutch relay | — | |
| W37 | OEM-E-8 | G5VOODOOPROV-E-E22 | 0.5 | no route | A/F sensor heater relay | — | |
| W38 | OEM-E-21 | G5VOODOOPROV-A-A28 | 0.5 | no route | Secondary O2 heater | — | |
| W39 | OEM-A-10 | G5VOODOOPROV-A-A27 | 0.5 | no route | A/F sensor heater | — | |
| W40 | OEM-B-15 | G5VOODOOPROV-A-A26 | 0.5 | no route | Engine mount control solenoid | — | |
| W41 | OEM-B-18 | G5VOODOOPROV-B-B4 | 0.5 | no route | Alternator control | — | |
| W42 | OEM-B-21 | G5VOODOOPROV-B-B3 | 0.5 | no route | Evap canister purge valve | — | |
| W43 | OEM-E-19 | G5VOODOOPROV-B-B2 | 0.5 | no route | Evap canister vent shut valve | — | |
| W44 | OEM-E-20 | G5VOODOOPROV-B-B15 | 0.5 | no route | Secondary O2 sensor | — | |
| W45 | OEM-E-1 | G5VOODOOPROV-A-A16 | 0.5 | no route | Coolant temp sensor 2 | — | |
| W46 | OEM-B-17 | G5VOODOOPROV-B-B6 | 0.5 | no route | Intake air temp sensor | — | |
| W47 | OEM-B-13 | G5VOODOOPROV-B-B16 | 0.5 | no route | Alternator FR signal | — | |
| W48 | OEM-E-14 | G5VOODOOPROV-B-B23 | 0.5 | no route | Fuel tank pressure sensor | — | |
| W49 | OEM-E-15 | G5VOODOOPROV-B-B24 | 0.5 | no route | Electrical load detector | — | |
| W50 | OEM-E-16 | G5VOODOOPROV-B-B31 | 0.5 | no route | Power steering load detector | — | |
| W51 | OEM-A-18 | G5VOODOOPROV-A-A30 | 0.5 | no route | Vehicle speed sensor | — | |
| W52 | OEM-B-11 | G5VOODOOPROV-A-A31 | 0.5 | no route | VTEC oil pressure switch | — | |
| W53 | OEM-D-1 | G5VOODOOPROV-A-A23 | 0.5 | no route | Cruise set switch | — | |
| W54 | OEM-D-4 | G5VOODOOPROV-B-B21 | 0.5 | no route | Cruise main switch | — | |
| W55 | OEM-D-7 | G5VOODOOPROV-B-B20 | 0.5 | no route | Cruise resume switch | — | |
| W56 | OEM-D-8 | G5VOODOOPROV-B-B19 | 0.5 | no route | Brake pedal position switch | — | |
| W57 | OEM-D-9 | G5VOODOOPROV-B-B30 | 0.5 | no route | Cruise clutch signal | — | |
| W58 | OEM-E-22 | G5VOODOOPROV-B-B29 | 0.5 | no route | Brake pedal switch | — | |
| W59 | OEM-E-28 | G5VOODOOPROV-B-B28 | 0.5 | no route | A/C switch signal | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | S2K-0609-ECU-A | Honda | S2000 2006–09 ECU plug A (P/N unknown) | 1.000 | ea |
| connector | S2K-0609-ECU-B | Honda | S2000 2006–09 ECU plug B (P/N unknown) | 1.000 | ea |
| connector | S2K-0609-ECU-D | Honda | S2000 2006–09 ECU plug D (P/N unknown) | 1.000 | ea |
| connector | S2K-0609-ECU-E | Honda | S2000 2006–09 ECU plug E (P/N unknown) | 1.000 | ea |
| connector | S2K-0609-TB | Honda | 2006–09 S2000 throttle body plug, 6-way (pin numbers from Link forum dealer post; housing P/N unknown) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| dbw_motor | TB | Throttle motor + | — | G5VOODOOPROV-B-B18 | Aux 9 | hbridge | — |
| dbw_motor | TB | Throttle motor − | — | G5VOODOOPROV-B-B26 | Aux 10 | hbridge | — |
| dbw_tps | TB | Throttle position 1 | 0_5v | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_0_5 | — |
| dbw_tps | TB | Throttle position 2 | 0_5v | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_0_5 | — |
Findings
Open (34)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | PHYS_REQUIRED_OPEN | TB-J-GND | TB-J-GND "Throttle sensor ground" is required but not wired. |
| error | REQUIRED_UNMAPPED | OEM-A-2 | Required OEM function "Ignition power 2" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-23 | Required OEM function "Sensor ground 2" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-24 | Required OEM function "Sensor ground 1" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-3 | Required OEM function "Ignition power 1" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-4 | Required OEM function "Power ground 2" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-5 | Required OEM function "Power ground 1" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-8 | Required OEM function "Logic ground 2" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-A-9 | Required OEM function "Logic ground 1" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E-3 | Required OEM function "Logic ground 3" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E-4 | Required OEM function "Sensor ground 3" (sensor_ground) is not connected to the new ECU. |
| warn | DBW_MOTOR_CURRENT | G5VOODOOPROV-B-B18 | Cannot confirm G5 Voodoo Pro V1 can drive the throttle motor: G5VOODOOPROV-B-B18 "Aux 9" has no peak rating (motor stalls at ~14 A). |
| warn | DBW_MOTOR_CURRENT | G5VOODOOPROV-B-B26 | Cannot confirm G5 Voodoo Pro V1 can drive the throttle motor: G5VOODOOPROV-B-B26 "Aux 10" has no peak rating (motor stalls at ~14 A). |
| warn | DBW_SHARED_5V | G5VOODOOPROV-A-A32 + OEM-A-20 + OEM-A-21 + OEM-E-5 + SP-5V1-1 + TB-J-VCC | These 5 V supplies are separate in the stock car (OEM-A-20 [s2k_vcc2], OEM-A-21 [s2k_vcc1], OEM-E-5 [s2k_vcc3]) and here share one ECU 5 V (G5VOODOOPROV-A-A32). On a drive-by-wire car the OEM splits them so one short or fault can't corrupt both throttle/pedal tracks at once. G5 Voodoo Pro V1 has 1 5 V sensor supply pin(s). All are in use, so decide: accept the shared supply (and rely on the ECU's DBW fault checks), or add a separate regulated 5 V for the sub tracks. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A1 | G5VOODOOPROV-A-A1 "Injection 4" drives OEM-B-2 Injector 4 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A18 | G5VOODOOPROV-A-A18 "Aux 4" drives OEM-E-12 Radiator fan control (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A19 | G5VOODOOPROV-A-A19 "Aux 3" drives OEM-D-15 Throttle actuator relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A2 | G5VOODOOPROV-A-A2 "Injection 3" drives OEM-B-3 Injector 3 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A20 | G5VOODOOPROV-A-A20 "Aux 2" drives OEM-E-7 Main relay control (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-E-17 Fuel pump relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A29 | G5VOODOOPROV-A-A29 "Aux 5" drives OEM-B-6 VTEC solenoid (load 1.0 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A3 | G5VOODOOPROV-A-A3 "Injection 2" drives OEM-B-4 Injector 2 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A4 | G5VOODOOPROV-A-A4 "Injection 1" drives OEM-B-5 Injector 1 (load 1.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-E-E15 | G5VOODOOPROV-E-E15 "Aux 13 / WB Heater 1" drives OEM-E-18 A/C clutch relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-E-E22 | G5VOODOOPROV-E-E22 "Aux 14 / WB Heater 2" drives OEM-E-8 A/F sensor heater relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | SUPPLY_GROUP | G5VOODOOPROV-A-A32 + OEM-A-20 + OEM-A-21 + OEM-E-5 + SP-5V1-1 + TB-J-VCC | Supplies meant to stay independent share one net: OEM-A-20 [s2k_vcc2], OEM-A-21 [s2k_vcc1], OEM-E-5 [s2k_vcc3]. The new ECU has no free 5 V reference, so they share one: normal on a standalone, but a short on any of these sensors drops them all. |
| info | NET_FAMILY | OEM-A-10 ↔ G5VOODOOPROV-A-A27 | OEM-A-10 "A/F sensor heater" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-B-15 ↔ G5VOODOOPROV-A-A26 | OEM-B-15 "Engine mount control solenoid" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-B-18 ↔ G5VOODOOPROV-B-B4 | OEM-B-18 "Alternator control" [low_side_out] is wired to G5VOODOOPROV-B-B4 "Injection 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-21 ↔ G5VOODOOPROV-B-B3 | OEM-B-21 "Evap canister purge valve" [low_side_out] is wired to G5VOODOOPROV-B-B3 "Injection 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-B-6 ↔ G5VOODOOPROV-A-A29 | OEM-B-6 "VTEC solenoid" [high_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as high side. |
| info | NET_FAMILY | OEM-E-19 ↔ G5VOODOOPROV-B-B2 | OEM-E-19 "Evap canister vent shut valve" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E-21 ↔ G5VOODOOPROV-A-A28 | OEM-E-21 "Secondary O2 heater" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | UNMAPPED | OEM | 13 optional OEM pins are not mapped: OEM-A-28 A/F sensor signal −; OEM-A-31 A/F sensor signal +; OEM-B-10 Alternator L signal; OEM-B-19 Throttle actuator command to throttle control module (SEFD); OEM-B-20 Throttle actuator command to throttle control module (SEDF); OEM-E-11 CAN H; OEM-E-13 Multiplex communication; OEM-E-24 CAN L; OEM-E-25 Engine speed pulse (tacho); OEM-E-26 Vehicle speed output; OEM-E-27 Immobilizer code; OEM-E-29 Service check signal; OEM-E-30 Write enable signal |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Fit check: unconfirmed. Confirm these before building: - Throttle motor draws ≥ ~14 A at stall; this ECU's H-bridge rating is not known Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-A 24: Sensor ground 1: no rule for class ground_sensor; wire by hand - OEM-A 3: Ignition power 1: no rule for class ecu_main_power; wire by hand - OEM-A 2: Ignition power 2: no rule for class ecu_main_power; wire by hand - OEM-A 23: Sensor ground 2: no rule for class ground_sensor; wire by hand - OEM-E 4: Sensor ground 3: no rule for class ground_sensor; wire by hand - TB-J GND: Throttle sensor ground: no rule for class ground_sensor; wire by hand Not wired: - OEM-E 25: Engine speed pulse (tacho): no free tacho/frequency_out/low_side/ls_hs on Link G5 Voodoo Pro V1 - OEM-E 26: Vehicle speed output: no free frequency_out/tacho/low_side/ls_hs on Link G5 Voodoo Pro V1 - OEM-E 11: CAN H: no free can_h on Link G5 Voodoo Pro V1 - OEM-E 24: CAN L: no free can_l on Link G5 Voodoo Pro V1 - OEM-E 13: Multiplex communication: no free k_line on Link G5 Voodoo Pro V1 - OEM-A 28: A/F sensor signal −: not classified in the library; wire by hand - OEM-A 31: A/F sensor signal +: not classified in the library; wire by hand - OEM-B 10: Alternator L signal: not classified in the library; wire by hand - OEM-B 19: Throttle actuator command to throttle control module (SEFD): not classified in the library; wire by hand - OEM-B 20: Throttle actuator command to throttle control module (SEDF): not classified in the library; wire by hand - OEM-E 27: Immobilizer code: not classified in the library; wire by hand - OEM-E 29: Service check signal: not classified in the library; wire by hand - OEM-E 30: Write enable signal: not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | AEM 30-6053 Series 2 Plug & Play EMS, 2006–2008 S2000 AP2 (original ECU pinout) | https://documents.aemelectronics.com/techlibrary_30-6053_series_2_plug___play_ems.pdf | — | 2026-10-05 | ecc8006f849f |
| 4 | community_copy | Honda S2000 Service Manual 2000–2008, Fuel and Emissions Systems | https://www.s2000.wiki/view/images/7/7f/Service_Manual_2000-2008.pdf | archive | 2026-10-05 | a470cfc928e9 |
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 3 | vendor_doc | ScienceofSpeed Link G4X ECU, S2000 2006–09 (product page) | https://www.scienceofspeed.com/s2000-2000-09/scienceofspeed-link-g4x-ecu-s2000-2006-09-enpp-3822.html | archive | 2026-10-05 | 643bc0efd6d7 |
| 2 | forum | Link forum: dbw wiring (07/08 S2000, ViPEC V88) | https://forums.linkecu.com/topic/313-dbw-wiring/ | — | 2026-10-05 | b788a1b47b9e |