MX-5 Miata Mazdaspeed 2004-05 (BP-ZET turbo, no VVT) → MaxxECU MaxxECU RACE REV9+ (auto)
MX-5 Miata Mazdaspeed 2004-05 (BP-ZET turbo, no VVT) — MaxxECU — MaxxECU RACE
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-17
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 50 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-2-P | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-4-AF | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | MAXXECURACE-C1-M4 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-3-A | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-3-B | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-4-A | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | MAXXECURACE-C1-L4 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | MAXXECURACE-C2-G4 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-4-O | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-0V-1 | MAXXECURACE-C1-H1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-0V-1 | MAXXECURACE-C1-H2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-4-L | MAXXECURACE-C1-G1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-3-Y | MAXXECURACE-C1-H3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-3-V | MAXXECURACE-C1-H4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-4-M | MAXXECURACE-C2-E2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-3-F | MAXXECURACE-C1-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-3-I | MAXXECURACE-C1-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-2-A | MAXXECURACE-C1-K1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-2-D | MAXXECURACE-C1-K2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-2-G | MAXXECURACE-C1-M1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-2-J | MAXXECURACE-C1-M2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-4-X | MAXXECURACE-C1-J3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-4-V | MAXXECURACE-C1-G2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-4-P | MAXXECURACE-C1-F1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-2-B | MAXXECURACE-C1-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-2-C | MAXXECURACE-C1-C4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-2-K | MAXXECURACE-C1-D4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-2-M | MAXXECURACE-C1-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-3-H | MAXXECURACE-C1-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-2-O | MAXXECURACE-C1-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-4-D | MAXXECURACE-C2-G1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-4-E | MAXXECURACE-C2-G2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-3-J | MAXXECURACE-C1-D1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-3-P | MAXXECURACE-C1-C1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-2-Q | MAXXECURACE-C1-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-2-E | MAXXECURACE-C1-M3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-2-F | MAXXECURACE-C1-L3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-2-H | MAXXECURACE-C1-L2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-2-I | MAXXECURACE-C1-L1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-4-AE | MAXXECURACE-C1-J4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-4-AA | MAXXECURACE-C2-G3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-4-W | MAXXECURACE-C2-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-4-R | MAXXECURACE-C1-F2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-4-N | MAXXECURACE-C1-J1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-4-AD | MAXXECURACE-C2-F1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-3-T | MAXXECURACE-C1-K3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-3-S | MAXXECURACE-C1-K4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-4-B | MAXXECURACE-C2-F3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-4-C | MAXXECURACE-C2-F4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-4-F | MAXXECURACE-C2-F2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MAXXECURACE-C1-G1 | MAXXECURACE-C1-H1 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | MAXXECURACE-C1-M4 | MAXXECURACE-C1-H1 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | MAXXECURACE-C1-M4 | MAXXECURACE-C1-L4 | open (OL) | +12 V supply must not touch power ground | |
| 4 | MAXXECURACE-C1-L4 | MAXXECURACE-C1-G1 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | MAXXECURACE-C1-M4 | MAXXECURACE-C1-G1 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECURACE-C1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | GPO 5 | — | W29 | — | 0.5 | OEM-3-H | — | — | — |
| A2 | IGN 1 | — | W16 | — | 0.5 | OEM-3-F | — | — | — |
| A3 | IGN 2 | — | W17 | — | 0.5 | OEM-3-I | — | — | — |
| A4 | GPO 8/TACHO | — | W35 | — | 0.5 | OEM-2-Q | — | — | — |
| B1 | GPO 6 | — | W30 | — | 0.5 | OEM-2-O | — | — | — |
| B2 | IGN 3 | — | — | — | — | — | — | — | — |
| B3 | IGN 4 | — | — | — | — | — | — | — | — |
| B4 | GPO 1 | — | W25 | — | 0.5 | OEM-2-B | — | — | — |
| C1 | GPO 7 | — | W34 | — | 0.5 | OEM-3-P | — | — | — |
| C2 | IGN 5 | — | — | — | — | — | — | — | — |
| C3 | IGN 6 | — | — | — | — | — | — | — | — |
| C4 | GPO 2 | — | W26 | — | 0.5 | OEM-2-C | — | — | — |
| D1 | WBO2 Heater- | — | W33 | — | 0.5 | OEM-3-J | — | — | — |
| D2 | IGN 7 | — | — | — | — | — | — | — | — |
| D3 | IGN 8 | — | — | — | — | — | — | — | — |
| D4 | GPO 3 | — | W27 | — | 0.5 | OEM-2-K | — | — | — |
| E1 | CAN H | — | — | — | — | — | — | — | — |
| E2 | CAN L | — | — | — | — | — | — | — | — |
| E3 | GND Shield | — | — | — | — | — | — | — | — |
| E4 | GPO 4 | — | W28 | — | 0.5 | OEM-2-M | — | — | — |
| F1 | CLT | — | W24 | — | 0.5 | OEM-4-P | — | — | — |
| F2 | IAT | — | W43 | — | 0.5 | OEM-4-R | — | — | — |
| F3 | WBO2 VREF | — | — | — | — | — | — | — | — |
| F4 | WBO2 VS | — | — | — | — | — | — | — | — |
| G1 | +5V sensor supply | — | W12 | — | 0.5 | OEM-4-L | — | — | — |
| G2 | TPS/AIN | — | W23 | — | 0.5 | OEM-4-V | — | — | — |
| G3 | WBO2 IP | — | — | — | — | — | — | — | — |
| G4 | WBO2 RCAL | — | — | — | — | — | — | — | — |
| H1 | Sensor GND | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| H2 | Trigger GND | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| H3 | TRIGGER | — | W13 | — | 0.5 | OEM-3-Y | — | — | — |
| H4 | HOME | — | W14 | — | 0.5 | OEM-3-V | — | — | — |
| J1 | AIN 1 (temperature) | — | W44 | — | 0.5 | OEM-4-N | — | — | — |
| J2 | AIN 2 (temperature) | — | — | — | — | — | — | — | — |
| J3 | AIN 3 (0-5V) | — | W22 | — | 0.5 | OEM-4-X | — | — | — |
| J4 | AIN 4 (0-5V) | — | W40 | — | 0.5 | OEM-4-AE | — | — | — |
| K1 | INJ 1 | — | W18 | — | 0.5 | OEM-2-A | — | — | — |
| K2 | INJ 2 | — | W19 | — | 0.5 | OEM-2-D | — | — | — |
| K3 | DIN/VR 1 | — | W46 | — | 0.5 | OEM-3-T | — | — | — |
| K4 | DIN/VR 2 | — | W47 | — | 0.5 | OEM-3-S | — | — | — |
| L1 | INJ 8 | — | W39 | — | 0.5 | OEM-2-I | — | — | — |
| L2 | INJ 7 | — | W38 | — | 0.5 | OEM-2-H | — | — | — |
| L3 | INJ 6 | — | W37 | — | 0.5 | OEM-2-F | — | — | — |
| L4 | Engine GND | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| M1 | INJ 3 | — | W20 | — | 0.5 | OEM-2-G | — | — | — |
| M2 | INJ 4 | — | W21 | — | 0.5 | OEM-2-J | — | — | — |
| M3 | INJ 5 | — | W36 | — | 0.5 | OEM-2-E | — | — | — |
| M4 | +12V ECU power supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
MAXXECURACE-C2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | EGT 5+ | — | — | — | — | — | — | — | — |
| A2 | EGT 6+ | — | — | — | — | — | — | — | — |
| A3 | EGT 7+ | — | — | — | — | — | — | — | — |
| A4 | EGT 8+ | — | — | — | — | — | — | — | — |
| B1 | EGT 5- | — | — | — | — | — | — | — | — |
| B2 | EGT 6- | — | — | — | — | — | — | — | — |
| B3 | EGT 7- | — | — | — | — | — | — | — | — |
| B4 | EGT 8- | — | — | — | — | — | — | — | — |
| C1 | EGT 1+ | — | — | — | — | — | — | — | — |
| C2 | EGT 2+ | — | — | — | — | — | — | — | — |
| C3 | EGT 3+ | — | — | — | — | — | — | — | — |
| C4 | EGT 4+ | — | — | — | — | — | — | — | — |
| D1 | EGT 1- | — | — | — | — | — | — | — | — |
| D2 | EGT 2- | — | — | — | — | — | — | — | — |
| D3 | EGT 3- | — | — | — | — | — | — | — | — |
| D4 | EGT 4- | — | — | — | — | — | — | — | — |
| E1 | KNOCK GND | — | — | — | — | — | — | — | — |
| E2 | Knock 1 | — | W15 | — | 0.5 | OEM-4-M | — | — | — |
| E3 | Knock 2 | — | — | — | — | — | — | — | — |
| E4 | AIN 6 (0-5V) | — | W42 | — | 0.5 | OEM-4-W | — | — | — |
| F1 | AIN 7 (0-5V) | — | W45 | — | 0.5 | OEM-4-AD | — | — | — |
| F2 | AIN 8 (0-5V) | — | W50 | — | 0.5 | OEM-4-F | — | — | — |
| F3 | DIN/VR 4 | — | W48 | — | 0.5 | OEM-4-B | — | — | — |
| F4 | DIN/VR 5 | — | W49 | — | 0.5 | OEM-4-C | — | — | — |
| G1 | GPO 15 (+12V) | — | W31 | — | 0.5 | OEM-4-D | — | — | — |
| G2 | GPO 16 (+12V) | — | W32 | — | 0.5 | OEM-4-E | — | — | — |
| G3 | AIN 5 (0-5V) | — | W41 | — | 0.5 | OEM-4-AA | — | — | — |
| G4 | ENGINE GROUND | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| H1 | MOTOR 2+ | — | — | — | — | — | — | — | — |
| H2 | MOTOR 1- | — | — | — | — | — | — | — | — |
| H3 | MOTOR 2- | — | — | — | — | — | — | — | — |
| H4 | MOTOR 1+ | — | — | — | — | — | — | — | — |
OEM-2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Injector 1 | — | W18 | — | 0.5 | MAXXECURACE-C1-K1 | — | — | — |
| B | Cooling fan relay | — | W25 | — | 0.5 | MAXXECURACE-C1-B4 | — | — | — |
| C | Condenser fan relay | — | W26 | — | 0.5 | MAXXECURACE-C1-C4 | — | — | — |
| D | Injector 2 | — | W19 | — | 0.5 | MAXXECURACE-C1-K2 | — | — | — |
| E | EGR valve | — | W36 | — | 0.5 | MAXXECURACE-C1-M3 | — | — | — |
| F | EGR valve | — | W37 | — | 0.5 | MAXXECURACE-C1-L3 | — | — | — |
| G | Injector 3 | — | W20 | — | 0.5 | MAXXECURACE-C1-M1 | — | — | — |
| H | EGR valve | — | W38 | — | 0.5 | MAXXECURACE-C1-L2 | — | — | — |
| I | EGR valve | — | W39 | — | 0.5 | MAXXECURACE-C1-L1 | — | — | — |
| J | Injector 4 | — | W21 | — | 0.5 | MAXXECURACE-C1-M2 | — | — | — |
| K | A/C clutch relay | — | W27 | — | 0.5 | MAXXECURACE-C1-D4 | — | — | — |
| L | NC | — | — | — | — | — | — | — | — |
| M | Fuel pump relay | — | W28 | — | 0.5 | MAXXECURACE-C1-E4 | — | — | — |
| N | VTCS solenoid (intake butterflies) | — | — | — | — | — | — | — | — |
| O | Fuel pump relay (non-immobiliser) | — | W30 | — | 0.5 | MAXXECURACE-C1-B1 | — | — | — |
| P | ISC valve +14V feed | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| Q | ISC valve low side | — | W35 | — | 0.5 | MAXXECURACE-C1-A4 | — | — | — |
| R | Malfunction indicator lamp (MIL) | — | — | — | — | — | — | — | — |
OEM-3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| B | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| C | Purge solenoid valve | — | — | — | — | — | — | — | — |
| D | EGR boost solenoid | — | — | — | — | — | — | — | — |
| E | NC | — | — | — | — | — | — | — | — |
| F | Ignition 1 (coils 1+4, wasted spark) | — | W16 | — | 0.5 | MAXXECURACE-C1-A2 | — | — | — |
| G | NC | — | — | — | — | — | — | — | — |
| H | Main relay | — | W29 | — | 0.5 | MAXXECURACE-C1-A1 | — | — | — |
| I | Ignition 2 (coils 2+3, wasted spark) | — | W17 | — | 0.5 | MAXXECURACE-C1-A3 | — | — | — |
| J | Front O2 heater | — | W33 | — | 0.5 | MAXXECURACE-C1-D1 | — | — | — |
| K | EVAP leak detection pump | — | — | — | — | — | — | — | — |
| L | NC | — | — | — | — | — | — | — | — |
| M | Alternator control | — | — | — | — | — | — | — | — |
| N | NC | — | — | — | — | — | — | — | — |
| O | Tachometer output | — | — | — | — | — | — | — | — |
| P | Rear O2 heater | — | W34 | — | 0.5 | MAXXECURACE-C1-C1 | — | — | — |
| Q | Data link connector (K-line) | — | — | — | — | — | — | — | — |
| R | NC | — | — | — | — | — | — | — | — |
| S | Immobiliser | — | W47 | — | 0.5 | MAXXECURACE-C1-K4 | — | — | — |
| T | Vehicle speed | — | W46 | — | 0.5 | MAXXECURACE-C1-K3 | — | — | — |
| U | Charge lamp | — | — | — | — | — | — | — | — |
| V | Cam position (CMP) | — | W14 | — | 0.5 | MAXXECURACE-C1-H4 | — | — | — |
| W | NC | — | — | — | — | — | — | — | — |
| X | NC | — | — | — | — | — | — | — | — |
| Y | Crank position (CKP) | — | W13 | — | 0.5 | MAXXECURACE-C1-H3 | — | — | — |
| Z | NC | — | — | — | — | — | — | — | — |
OEM-4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| AA | Rear O2 signal | — | W41 | — | 0.5 | MAXXECURACE-C2-G3 | — | — | — |
| AB | NC | — | — | — | — | — | — | — | — |
| AC | Data link connector (DLC TEN, turbo) | — | — | — | — | — | — | — | — |
| AD | Fuel level | — | W45 | — | 0.5 | MAXXECURACE-C2-F1 | — | — | — |
| AE | BARO/MAP sensor (turbo boost pressure) | — | W40 | — | 0.5 | MAXXECURACE-C1-J4 | — | — | — |
| AF | ECU power +14V (main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| AG | Constant +12V | — | — | — | — | — | — | — | — |
| AH | EVAP leak detection pump solenoid valve | — | — | — | — | — | — | — | — |
| B | Brake switch | — | W48 | — | 0.5 | MAXXECURACE-C2-F3 | — | — | — |
| C | Power steering pressure switch | — | W49 | — | 0.5 | MAXXECURACE-C2-F4 | — | — | — |
| D | Boost control solenoid (turbo) | — | W31 | — | 0.5 | MAXXECURACE-C2-G1 | — | — | — |
| E | Boost control solenoid (turbo) | — | W32 | — | 0.5 | MAXXECURACE-C2-G2 | — | — | — |
| F | A/C request | — | W50 | — | 0.5 | MAXXECURACE-C2-F2 | — | — | — |
| G | NC | — | — | — | — | — | — | — | — |
| H | Neutral switch | — | — | — | — | — | — | — | — |
| I | Clutch switch | — | — | — | — | — | — | — | — |
| J | VTCS vacuum switch | — | — | — | — | — | — | — | — |
| K | NC | — | — | — | — | — | — | — | — |
| L | +5V sensor supply | — | W12 | — | 0.5 | MAXXECURACE-C1-G1 | — | — | — |
| M | Knock sensor | — | W15 | — | 0.5 | MAXXECURACE-C2-E2 | — | — | — |
| N | Intake air temperature (IAT) | — | W44 | — | 0.5 | MAXXECURACE-C1-J1 | — | — | — |
| O | Signal ground | — | W9 | — | 0.5 | SP-0V-1 | — | — | — |
| P | Coolant temperature (ECT) | — | W24 | — | 0.5 | MAXXECURACE-C1-F1 | — | — | — |
| Q | NC | — | — | — | — | — | — | — | — |
| R | Intake air temperature 2 (IAT2, turbo) | — | W43 | — | 0.5 | MAXXECURACE-C1-F2 | — | — | — |
| S | Ignition switch (IG1) sense | — | — | — | — | — | — | — | — |
| T | Generator output voltage (terminal P) | — | — | — | — | — | — | — | — |
| U | NC | — | — | — | — | — | — | — | — |
| V | Throttle position (TPS) | — | W23 | — | 0.5 | MAXXECURACE-C1-G2 | — | — | — |
| W | Front O2 signal | — | W42 | — | 0.5 | MAXXECURACE-C2-E4 | — | — | — |
| X | Mass air flow (MAF) | — | W22 | — | 0.5 | MAXXECURACE-C1-J3 | — | — | — |
| Y | NC | — | — | — | — | — | — | — | — |
| Z | TCM (automatic only) | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W9 | — | 0.5 | OEM-4-O | — | — | — |
| 1 | — | — | W10 | — | 0.5 | MAXXECURACE-C1-H1 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | MAXXECURACE-C1-H2 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-2-P | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-4-AF | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MAXXECURACE-C1-M4 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-3-A | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-3-B | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-4-A | — | — | — |
| 1 | — | — | W7 | — | 0.85 | MAXXECURACE-C1-L4 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | MAXXECURACE-C2-G4 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-2-A | Injector 1 | injector_out | MAXXECURACE-C1-K1 | INJ 1 | injector_out | corroborated | |
| OEM-2-B | Cooling fan relay | low_side_out | MAXXECURACE-C1-B4 | GPO 1 | low_side_out | corroborated | |
| OEM-2-C | Condenser fan relay | low_side_out | MAXXECURACE-C1-C4 | GPO 2 | low_side_out | corroborated | |
| OEM-2-D | Injector 2 | injector_out | MAXXECURACE-C1-K2 | INJ 2 | injector_out | corroborated | |
| OEM-2-E | EGR valve | low_side_out | MAXXECURACE-C1-M3 | INJ 5 | injector_out | corroborated | |
| OEM-2-F | EGR valve | low_side_out | MAXXECURACE-C1-L3 | INJ 6 | injector_out | corroborated | |
| OEM-2-G | Injector 3 | injector_out | MAXXECURACE-C1-M1 | INJ 3 | injector_out | corroborated | |
| OEM-2-H | EGR valve | low_side_out | MAXXECURACE-C1-L2 | INJ 7 | injector_out | corroborated | |
| OEM-2-I | EGR valve | low_side_out | MAXXECURACE-C1-L1 | INJ 8 | injector_out | corroborated | |
| OEM-2-J | Injector 4 | injector_out | MAXXECURACE-C1-M2 | INJ 4 | injector_out | corroborated | |
| OEM-2-K | A/C clutch relay | low_side_out | MAXXECURACE-C1-D4 | GPO 3 | low_side_out | corroborated | |
| OEM-2-L | NC | — | — | — | — | single_source | |
| OEM-2-M | Fuel pump relay | low_side_out | MAXXECURACE-C1-E4 | GPO 4 | low_side_out | corroborated | |
| OEM-2-N | VTCS solenoid (intake butterflies) | low_side_out | — | — | — | corroborated | |
| OEM-2-O | Fuel pump relay (non-immobiliser) | low_side_out | MAXXECURACE-C1-B1 | GPO 6 | low_side_out | corroborated | |
| OEM-2-P | ISC valve +14V feed | power_in | MAXXECURACE-C1-M4 | +12V ECU power supply | power_in | corroborated | |
| OEM-2-Q | ISC valve low side | low_side_out | MAXXECURACE-C1-A4 | GPO 8/TACHO | low_side_out | corroborated | |
| OEM-2-R | Malfunction indicator lamp (MIL) | low_side_out | — | — | — | corroborated | |
| OEM-3-A | Power ground | ground | MAXXECURACE-C1-L4 + MAXXECURACE-C2-G4 | Engine GND + ENGINE GROUND | ground | corroborated | |
| OEM-3-B | Power ground | ground | MAXXECURACE-C1-L4 + MAXXECURACE-C2-G4 | Engine GND + ENGINE GROUND | ground | corroborated | |
| OEM-3-C | Purge solenoid valve | low_side_out | — | — | — | corroborated | |
| OEM-3-D | EGR boost solenoid | — | — | — | — | conflict | |
| OEM-3-E | NC | — | — | — | — | single_source | |
| OEM-3-F | Ignition 1 (coils 1+4, wasted spark) | ignition_out | MAXXECURACE-C1-A2 | IGN 1 | ignition_out | corroborated | |
| OEM-3-G | NC | — | — | — | — | single_source | |
| OEM-3-H | Main relay | low_side_out | MAXXECURACE-C1-A1 | GPO 5 | low_side_out | corroborated | |
| OEM-3-I | Ignition 2 (coils 2+3, wasted spark) | ignition_out | MAXXECURACE-C1-A3 | IGN 2 | ignition_out | corroborated | |
| OEM-3-J | Front O2 heater | low_side_out | MAXXECURACE-C1-D1 | WBO2 Heater- | low_side_out | corroborated | |
| OEM-3-K | EVAP leak detection pump | low_side_out | — | — | — | corroborated | |
| OEM-3-L | NC | — | — | — | — | single_source | |
| OEM-3-M | Alternator control | low_side_out | — | — | — | corroborated | |
| OEM-3-N | NC | — | — | — | — | single_source | |
| OEM-3-O | Tachometer output | tacho_out | — | — | — | corroborated | |
| OEM-3-P | Rear O2 heater | low_side_out | MAXXECURACE-C1-C1 | GPO 7 | low_side_out | corroborated | |
| OEM-3-Q | Data link connector (K-line) | serial | — | — | — | corroborated | |
| OEM-3-R | NC | — | — | — | — | single_source | |
| OEM-3-S | Immobiliser | digital_in | MAXXECURACE-C1-K4 | DIN/VR 2 | digital_in | corroborated | |
| OEM-3-T | Vehicle speed | digital_in | MAXXECURACE-C1-K3 | DIN/VR 1 | digital_in | corroborated | |
| OEM-3-U | Charge lamp | low_side_out | — | — | — | corroborated | |
| OEM-3-V | Cam position (CMP) | trigger_in | MAXXECURACE-C1-H4 | HOME | trigger_in | corroborated | |
| OEM-3-W | NC | — | — | — | — | single_source | |
| OEM-3-X | NC | — | — | — | — | single_source | |
| OEM-3-Y | Crank position (CKP) | trigger_in | MAXXECURACE-C1-H3 | TRIGGER | trigger_in | corroborated | |
| OEM-3-Z | NC | — | — | — | — | single_source | |
| OEM-4-A | Power ground | ground | MAXXECURACE-C1-L4 + MAXXECURACE-C2-G4 | Engine GND + ENGINE GROUND | ground | corroborated | |
| OEM-4-AA | Rear O2 signal | lambda_nb_in | MAXXECURACE-C2-G3 | AIN 5 (0-5V) | analog_in | corroborated | |
| OEM-4-AB | NC | — | — | — | — | single_source | |
| OEM-4-AC | Data link connector (DLC TEN, turbo) | serial | — | — | — | BrY | single_source |
| OEM-4-AD | Fuel level | analog_in | MAXXECURACE-C2-F1 | AIN 7 (0-5V) | analog_in | corroborated | |
| OEM-4-AE | BARO/MAP sensor (turbo boost pressure) | analog_in | MAXXECURACE-C1-J4 | AIN 4 (0-5V) | analog_in | LY | single_source |
| OEM-4-AF | ECU power +14V (main relay) | power_in | MAXXECURACE-C1-M4 | +12V ECU power supply | power_in | corroborated | |
| OEM-4-AG | Constant +12V | power_in | — | — | — | corroborated | |
| OEM-4-AH | EVAP leak detection pump solenoid valve | low_side_out | — | — | — | corroborated | |
| OEM-4-B | Brake switch | digital_in | MAXXECURACE-C2-F3 | DIN/VR 4 | digital_in | corroborated | |
| OEM-4-C | Power steering pressure switch | digital_in | MAXXECURACE-C2-F4 | DIN/VR 5 | digital_in | corroborated | |
| OEM-4-D | Boost control solenoid (turbo) | high_side_out | MAXXECURACE-C2-G1 | GPO 15 (+12V) | high_side_out | Y | single_source |
| OEM-4-E | Boost control solenoid (turbo) | high_side_out | MAXXECURACE-C2-G2 | GPO 16 (+12V) | high_side_out | Y | single_source |
| OEM-4-F | A/C request | digital_in | MAXXECURACE-C2-F2 | AIN 8 (0-5V) | analog_in | corroborated | |
| OEM-4-G | NC | — | — | — | — | single_source | |
| OEM-4-H | Neutral switch | digital_in | — | — | — | corroborated | |
| OEM-4-I | Clutch switch | digital_in | — | — | — | corroborated | |
| OEM-4-J | VTCS vacuum switch | digital_in | — | — | — | corroborated | |
| OEM-4-K | NC | — | — | — | — | single_source | |
| OEM-4-L | +5V sensor supply | vref | MAXXECURACE-C1-G1 | +5V sensor supply | vref | corroborated | |
| OEM-4-M | Knock sensor | knock_in | MAXXECURACE-C2-E2 | Knock 1 | knock_in | corroborated | |
| OEM-4-N | Intake air temperature (IAT) | temp_in | MAXXECURACE-C1-J1 | AIN 1 (temperature) | temp_in | corroborated | |
| OEM-4-O | Signal ground | sensor_ground | MAXXECURACE-C1-H1 + MAXXECURACE-C1-H2 | Sensor GND + Trigger GND | sensor_ground | corroborated | |
| OEM-4-P | Coolant temperature (ECT) | temp_in | MAXXECURACE-C1-F1 | CLT | temp_in | corroborated | |
| OEM-4-Q | NC | — | — | — | — | single_source | |
| OEM-4-R | Intake air temperature 2 (IAT2, turbo) | temp_in | MAXXECURACE-C1-F2 | IAT | temp_in | VY | single_source |
| OEM-4-S | Ignition switch (IG1) sense | digital_in | — | — | — | corroborated | |
| OEM-4-T | Generator output voltage (terminal P) | — | — | — | — | corroborated | |
| OEM-4-U | NC | — | — | — | — | single_source | |
| OEM-4-V | Throttle position (TPS) | analog_in | MAXXECURACE-C1-G2 | TPS/AIN | analog_in | corroborated | |
| OEM-4-W | Front O2 signal | lambda_nb_in | MAXXECURACE-C2-E4 | AIN 6 (0-5V) | analog_in | corroborated | |
| OEM-4-X | Mass air flow (MAF) | analog_in | MAXXECURACE-C1-J3 | AIN 3 (0-5V) | analog_in | corroborated | |
| OEM-4-Y | NC | — | — | — | — | single_source | |
| OEM-4-Z | TCM (automatic only) | — | — | — | — | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-2-P | SP-14V-1 | 0.85 | no route | ISC valve +14V feed | — | |
| W2 | OEM-4-AF | SP-14V-1 | 0.85 | no route | ECU power +14V (main relay) | — | |
| W3 | SP-14V-1 | MAXXECURACE-C1-M4 | 0.85 | no route | +12V ECU power supply | — | |
| W4 | OEM-3-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W5 | OEM-3-B | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-4-A | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | SP-GND-1 | MAXXECURACE-C1-L4 | 0.85 | no route | Engine GND | — | |
| W8 | SP-GND-1 | MAXXECURACE-C2-G4 | 0.85 | no route | ENGINE GROUND | — | |
| W9 | OEM-4-O | SP-0V-1 | 0.5 | no route | Signal ground | — | |
| W10 | SP-0V-1 | MAXXECURACE-C1-H1 | 0.5 | no route | Sensor GND | — | |
| W11 | SP-0V-1 | MAXXECURACE-C1-H2 | 0.5 | no route | Trigger GND | — | |
| W12 | OEM-4-L | MAXXECURACE-C1-G1 | 0.5 | no route | +5V sensor supply | — | |
| W13 | OEM-3-Y | MAXXECURACE-C1-H3 | 0.5 | no route | Crank position (CKP) | — | |
| W14 | OEM-3-V | MAXXECURACE-C1-H4 | 0.5 | no route | Cam position (CMP) | — | |
| W15 | OEM-4-M | MAXXECURACE-C2-E2 | 0.5 | no route | Knock sensor | — | |
| W16 | OEM-3-F | MAXXECURACE-C1-A2 | 0.5 | no route | Ignition 1 (coils 1+4, wasted spark) | — | |
| W17 | OEM-3-I | MAXXECURACE-C1-A3 | 0.5 | no route | Ignition 2 (coils 2+3, wasted spark) | — | |
| W18 | OEM-2-A | MAXXECURACE-C1-K1 | 0.5 | no route | Injector 1 | — | |
| W19 | OEM-2-D | MAXXECURACE-C1-K2 | 0.5 | no route | Injector 2 | — | |
| W20 | OEM-2-G | MAXXECURACE-C1-M1 | 0.5 | no route | Injector 3 | — | |
| W21 | OEM-2-J | MAXXECURACE-C1-M2 | 0.5 | no route | Injector 4 | — | |
| W22 | OEM-4-X | MAXXECURACE-C1-J3 | 0.5 | no route | Mass air flow (MAF) | — | |
| W23 | OEM-4-V | MAXXECURACE-C1-G2 | 0.5 | no route | Throttle position (TPS) | — | |
| W24 | OEM-4-P | MAXXECURACE-C1-F1 | 0.5 | no route | Coolant temperature (ECT) | — | |
| W25 | OEM-2-B | MAXXECURACE-C1-B4 | 0.5 | no route | Cooling fan relay | — | |
| W26 | OEM-2-C | MAXXECURACE-C1-C4 | 0.5 | no route | Condenser fan relay | — | |
| W27 | OEM-2-K | MAXXECURACE-C1-D4 | 0.5 | no route | A/C clutch relay | — | |
| W28 | OEM-2-M | MAXXECURACE-C1-E4 | 0.5 | no route | Fuel pump relay | — | |
| W29 | OEM-3-H | MAXXECURACE-C1-A1 | 0.5 | no route | Main relay | — | |
| W30 | OEM-2-O | MAXXECURACE-C1-B1 | 0.5 | no route | Fuel pump relay (non-immobiliser) | — | |
| W31 | OEM-4-D | MAXXECURACE-C2-G1 | 0.5 | no route | Boost control solenoid (turbo) | — | |
| W32 | OEM-4-E | MAXXECURACE-C2-G2 | 0.5 | no route | Boost control solenoid (turbo) | — | |
| W33 | OEM-3-J | MAXXECURACE-C1-D1 | 0.5 | no route | Front O2 heater | — | |
| W34 | OEM-3-P | MAXXECURACE-C1-C1 | 0.5 | no route | Rear O2 heater | — | |
| W35 | OEM-2-Q | MAXXECURACE-C1-A4 | 0.5 | no route | ISC valve low side | — | |
| W36 | OEM-2-E | MAXXECURACE-C1-M3 | 0.5 | no route | EGR valve | — | |
| W37 | OEM-2-F | MAXXECURACE-C1-L3 | 0.5 | no route | EGR valve | — | |
| W38 | OEM-2-H | MAXXECURACE-C1-L2 | 0.5 | no route | EGR valve | — | |
| W39 | OEM-2-I | MAXXECURACE-C1-L1 | 0.5 | no route | EGR valve | — | |
| W40 | OEM-4-AE | MAXXECURACE-C1-J4 | 0.5 | no route | BARO/MAP sensor (turbo boost pressure) | — | |
| W41 | OEM-4-AA | MAXXECURACE-C2-G3 | 0.5 | no route | Rear O2 signal | — | |
| W42 | OEM-4-W | MAXXECURACE-C2-E4 | 0.5 | no route | Front O2 signal | — | |
| W43 | OEM-4-R | MAXXECURACE-C1-F2 | 0.5 | no route | Intake air temperature 2 (IAT2, turbo) | — | |
| W44 | OEM-4-N | MAXXECURACE-C1-J1 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W45 | OEM-4-AD | MAXXECURACE-C2-F1 | 0.5 | no route | Fuel level | — | |
| W46 | OEM-3-T | MAXXECURACE-C1-K3 | 0.5 | no route | Vehicle speed | — | |
| W47 | OEM-3-S | MAXXECURACE-C1-K4 | 0.5 | no route | Immobiliser | — | |
| W48 | OEM-4-B | MAXXECURACE-C2-F3 | 0.5 | no route | Brake switch | — | |
| W49 | OEM-4-C | MAXXECURACE-C2-F4 | 0.5 | no route | Power steering pressure switch | — | |
| W50 | OEM-4-F | MAXXECURACE-C2-F2 | 0.5 | no route | A/C request | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (12)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | LOAD_UNKNOWN | MAXXECURACE-C1-A1 | MAXXECURACE-C1-A1 "GPO 5" drives OEM-3-H Main relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECURACE-C1-A4 | MAXXECURACE-C1-A4 "GPO 8/TACHO" drives OEM-2-Q ISC valve low side (load 1.0 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECURACE-C1-B4 | MAXXECURACE-C1-B4 "GPO 1" drives OEM-2-B Cooling fan relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECURACE-C1-C4 | MAXXECURACE-C1-C4 "GPO 2" drives OEM-2-C Condenser fan relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECURACE-C1-D4 | MAXXECURACE-C1-D4 "GPO 3" drives OEM-2-K A/C clutch relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | MAXXECURACE-C1-E4 | MAXXECURACE-C1-E4 "GPO 4" drives OEM-2-M Fuel pump relay (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-4-F ↔ MAXXECURACE-C2-F2 | OEM-4-F "A/C request" [digital_in] is wired to MAXXECURACE-C2-F2 "AIN 8 (0-5V)" [analog_in]. Analog and digital on one net. A switch on an analog input works with a pull-up and a threshold; an analog sensor on a digital input loses its value. |
| info | NET_FAMILY | OEM-2-E ↔ MAXXECURACE-C1-M3 | OEM-2-E "EGR valve" [low_side_out] is wired to MAXXECURACE-C1-M3 "INJ 5" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-F ↔ MAXXECURACE-C1-L3 | OEM-2-F "EGR valve" [low_side_out] is wired to MAXXECURACE-C1-L3 "INJ 6" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-H ↔ MAXXECURACE-C1-L2 | OEM-2-H "EGR valve" [low_side_out] is wired to MAXXECURACE-C1-L2 "INJ 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-2-I ↔ MAXXECURACE-C1-L1 | OEM-2-I "EGR valve" [low_side_out] is wired to MAXXECURACE-C1-L1 "INJ 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 17 optional OEM pins are not mapped: OEM-2-N VTCS solenoid (intake butterflies); OEM-2-R Malfunction indicator lamp (MIL); OEM-3-C Purge solenoid valve; OEM-3-D EGR boost solenoid; OEM-3-K EVAP leak detection pump; OEM-3-M Alternator control; OEM-3-O Tachometer output; OEM-3-Q Data link connector (K-line); OEM-3-U Charge lamp; OEM-4-AC Data link connector (DLC TEN, turbo); OEM-4-AH EVAP leak detection pump solenoid valve; OEM-4-H Neutral switch; OEM-4-I Clutch switch; OEM-4-J VTCS vacuum switch; OEM-4-S Ignition switch (IG1) sense; OEM-4-T Generator output voltage (terminal P); OEM-4-Z TCM (automatic only) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-4-AG | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-17. Review every wire against both manuals before building. Not wired: - OEM-4 AG: Constant +12V: MaxxECU MaxxECU RACE has no battery-constant input; not needed - OEM-4 S: Ignition switch (IG1) sense: key-on 12 V sense — optional in a swap (the main relay is energized from keyed 12 V, not from this pin); MaxxECU MaxxECU RACE has no dedicated key-on input - OEM-2 N: VTCS solenoid (intake butterflies): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU RACE - OEM-2 R: Malfunction indicator lamp (MIL): no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU RACE - OEM-3 C: Purge solenoid valve: no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU RACE - OEM-3 K: EVAP leak detection pump: no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU RACE - OEM-3 M: Alternator control: no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU RACE - OEM-3 U: Charge lamp: no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU RACE - OEM-4 AH: EVAP leak detection pump solenoid valve: no free low_side/relay_control/heater_low_side/ls_hs/injector on MaxxECU MaxxECU RACE - OEM-3 O: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on MaxxECU MaxxECU RACE - OEM-4 H: Neutral switch: no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU RACE - OEM-4 I: Clutch switch: no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU RACE - OEM-4 J: VTCS vacuum switch: no free switch_in/frequency_in/analog_0_5 on MaxxECU MaxxECU RACE - OEM-3 Q: Data link connector (K-line): no free k_line on MaxxECU MaxxECU RACE - OEM-4 AC: Data link connector (DLC TEN, turbo): no free k_line on MaxxECU MaxxECU RACE - OEM-3 D: EGR boost solenoid: not classified in the library; wire by hand - OEM-4 T: Generator output voltage (terminal P): not classified in the library; wire by hand - OEM-4 Z: TCM (automatic only): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | oem_manual | 2005 Mazda MX-5 Miata Engine Performance Control System (PCM terminal voltage reference, BP and BP WITH TC) | https://trull.org/alex/pubmirror/www.mellens.net/mazda/Mazda-Miata-2005/engine_control_system.pdf | — | — | — |
| 4 | vendor_doc | Adaptronic eSel039 Select Plugin ECU for Mazda MX5 / Miata NB8B/C (OEM ECU pinout) | https://www.miataturbo.net/attachments/ecus-tuning-54/04-msm-ecu-pinout-104032/nb8bc_oem_ecu_pinouts-224948d1602912806 | — | — | — |
| 4 | vendor_doc | Link G4X MX5NB2X install manual (NB2 2001-05) | https://linkecu.com/documentation/MX5XNB2.pdf | archive | 2026-10-05 | 741efdd9f2c8 |
| 4 | vendor_doc | MaxxECU GEN1 pinout (MINI / STREET / SPORT / V1 / RACE / PRO) | http://www.maxxecu.com/webhelp/wirings-maxxecu_pinout.html | archive | 2026-10-05 | 2e37b6814690 |