Toyota Supra A80 1993-98 USDM (2JZ-GTE, non-VVT) → Link G5 Voodoo Pro V1 (auto)
Toyota Supra A80 1993-98 USDM (2JZ-GTE, non-VVT) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-20
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 68 wires · 11 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E10-1 | MAIN-R-COIL+ | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | NEW-BATT-1 | MAIN-R-IN | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | MAIN-R-COIL- | SP-GND-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | MAIN-R-OUT | G5VOODOOPROV-A-5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | MAIN-R-OUT | G5VOODOOPROV-B-5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E9-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-E9-69 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-E9-78 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-E9-79 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-E9-80 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | G5VOODOOPROV-A-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | G5VOODOOPROV-A-34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | G5VOODOOPROV-B-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | G5VOODOOPROV-B-34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-GND-1 | G5VOODOOPROV-E-21 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-GND-1 | G5VOODOOPROV-E-7 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-E9-5 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-E9-6 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-E9-65 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-E9-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | SP-0V-1 | G5VOODOOPROV-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | SP-0V-1 | G5VOODOOPROV-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | G5VOODOOPROV-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E9-41 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E9-27 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E9-26 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E9-25 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E9-50 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E9-49 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E9-57 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E9-56 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E9-55 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E9-54 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E9-53 | G5VOODOOPROV-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E9-52 | G5VOODOOPROV-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E9-20 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E9-19 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E9-18 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E9-17 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E9-16 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E9-15 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E9-62 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E9-43 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E9-44 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E10-23 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E10-24 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E9-71 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E9-72 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-E10-22 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-E10-6 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-E9-32 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-E9-33 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-E9-34 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-E9-35 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-E9-60 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-E9-73 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-E9-74 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-E9-47 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-E9-48 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-E9-45 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-E10-2 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-E10-21 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-E9-58 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-E10-15 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-E10-4 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-E9-76 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | NEW-KEYON-1 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | G5VOODOOPROV-A-A32 | G5VOODOOPROV-A-24 | open (OL) | 5 V sensor reference must not touch sensor ground | |
| 2 | MAIN-R-COIL+ | G5VOODOOPROV-A-24 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | MAIN-R-COIL+ | G5VOODOOPROV-A-25 | open (OL) | +12 V supply must not touch power ground | |
| 4 | OEM-E10-31 | G5VOODOOPROV-A-24 | open (OL) | +12 V supply must not touch sensor ground | |
| 5 | OEM-E10-31 | G5VOODOOPROV-A-25 | open (OL) | +12 V supply must not touch power ground | |
| 6 | G5VOODOOPROV-A-24 | G5VOODOOPROV-A-5 | open (OL) | sensor ground must not touch +12 V supply | |
| 7 | G5VOODOOPROV-A-24 | NEW-BATT-1 | open (OL) | sensor ground must not touch +12 V supply | |
| 8 | G5VOODOOPROV-A-25 | G5VOODOOPROV-A-5 | open (OL) | power ground must not touch +12 V supply | |
| 9 | G5VOODOOPROV-A-25 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference | |
| 10 | G5VOODOOPROV-A-25 | NEW-BATT-1 | open (OL) | power ground must not touch +12 V supply | |
| 11 | G5VOODOOPROV-A-A32 | G5VOODOOPROV-A-5 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 12 | G5VOODOOPROV-A-A32 | NEW-BATT-1 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 13 | MAIN-R-COIL+ | G5VOODOOPROV-A-A32 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 14 | OEM-E10-31 | G5VOODOOPROV-A-A32 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 24 | Sensor Gnd | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 25 | Power Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 34 | Power Ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Main ECU power input (+14V) | — | W5 | — | 0.85 | MAIN-R-OUT | — | — | — |
| 7 | Sensor Gnd / Shield | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| A1 | Injection 4 | — | W40 | — | 0.5 | OEM-E9-17 | — | — | — |
| A10 | Ignition 4 | — | W34 | — | 0.5 | OEM-E9-54 | — | — | — |
| A11 | Ignition 3 | — | W33 | — | 0.5 | OEM-E9-55 | — | — | — |
| A12 | Ignition 2 | — | W32 | — | 0.5 | OEM-E9-56 | — | — | — |
| A13 | Ignition 1 | — | W31 | — | 0.5 | OEM-E9-57 | — | — | — |
| A14 | Analogue Volt 4 | — | W60 | — | 0.5 | OEM-E9-48 | — | — | — |
| A15 | Analogue Temp 1 | — | W45 | — | 0.5 | OEM-E9-44 | — | — | — |
| A16 | Analogue Temp 2 | — | W61 | — | 0.5 | OEM-E9-45 | — | — | — |
| A17 | Analogue Volt 1 | — | W43 | — | 0.5 | OEM-E9-62 | — | — | — |
| A18 | Aux 4 | — | W51 | — | 0.5 | OEM-E10-6 | — | — | — |
| A19 | Aux 3 | — | W50 | — | 0.5 | OEM-E10-22 | — | — | — |
| A2 | Injection 3 | — | W39 | — | 0.5 | OEM-E9-18 | — | — | — |
| A20 | Aux 2 | — | W47 | — | 0.5 | OEM-E10-24 | — | — | — |
| A21 | Aux 1 | — | W46 | — | 0.5 | OEM-E10-23 | — | — | — |
| A22 | Analogue Volt 2 | — | W44 | — | 0.5 | OEM-E9-43 | — | — | — |
| A23 | Digital Input 3 | — | W63 | — | 0.5 | OEM-E10-21 | — | — | — |
| A26 | Aux 8 | — | W55 | — | 0.5 | OEM-E9-35 | — | — | — |
| A27 | Aux 7 | — | W54 | — | 0.5 | OEM-E9-34 | — | — | — |
| A28 | Aux 6 | — | W53 | — | 0.5 | OEM-E9-33 | — | — | — |
| A29 | Aux 5 | — | W52 | — | 0.5 | OEM-E9-32 | — | — | — |
| A3 | Injection 2 | — | W38 | — | 0.5 | OEM-E9-19 | — | — | — |
| A30 | Digital Input 1 | — | W28 | — | 0.5 | OEM-E9-25 | — | — | — |
| A31 | Digital Input 2 | — | W62 | — | 0.5 | OEM-E10-2 | — | — | — |
| A32 | +5V Out | — | W25 | — | 0.5 | OEM-E9-41 | — | — | — |
| A33 | Analogue Volt 3 | — | W59 | — | 0.5 | OEM-E9-47 | — | — | — |
| A4 | Injection 1 | — | W37 | — | 0.5 | OEM-E9-20 | — | — | — |
| A6 | Ignition Switch | — | W68 | — | 0.5 | NEW-KEYON-1 | — | — | — |
| A8 | Trigger 1 | — | W26 | — | 0.5 | OEM-E9-27 | — | — | — |
| A9 | Trigger 2 | — | W27 | — | 0.5 | OEM-E9-26 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 17 | Shield / Gnd | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 25 | Power Ground | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 34 | Power Ground | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | H-Bridge driver power (+14V E-Throttle) | — | W6 | — | 0.85 | MAIN-R-OUT | — | — | — |
| B1 | Injection 8 | — | W57 | — | 0.5 | OEM-E9-73 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | W36 | — | 0.5 | OEM-E9-52 | — | — | — |
| B13 | Ignition 5 | — | W35 | — | 0.5 | OEM-E9-53 | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | — | — | — | — | — | — | — |
| B16 | Analogue Volt 7 | — | — | — | — | — | — | — | — |
| B18 | Aux 9 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 | — | W66 | — | 0.5 | OEM-E10-4 | — | — | — |
| B2 | Injection 7 | — | W56 | — | 0.5 | OEM-E9-60 | — | — | — |
| B20 | Digital Input 5 | — | W65 | — | 0.5 | OEM-E10-15 | — | — | — |
| B21 | Digital Input 4 | — | W64 | — | 0.5 | OEM-E9-58 | — | — | — |
| B23 | Analogue Volt 8 | — | — | — | — | — | — | — | — |
| B24 | Analogue Volt 9 | — | — | — | — | — | — | — | — |
| B26 | Aux 10 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | — | — | — | — | — | — | — |
| B28 | Digital Input 9 | — | — | — | — | — | — | — | — |
| B29 | Digital Input 8 | — | — | — | — | — | — | — | — |
| B3 | Injection 6 | — | W42 | — | 0.5 | OEM-E9-15 | — | — | — |
| B30 | Digital Input 7 | — | W67 | — | 0.5 | OEM-E9-76 | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | — | — | — | — | — | — | — |
| B4 | Injection 5 | — | W41 | — | 0.5 | OEM-E9-16 | — | — | — |
| B6 | Analogue Temp 3 | — | — | — | — | — | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W30 | — | 0.5 | OEM-E9-49 | — | — | — |
| B9 | Knock 1 | — | W29 | — | 0.5 | OEM-E9-50 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 21 | Power Ground | — | W16 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Power Ground | — | W17 | — | 0.85 | SP-GND-1 | — | — | — |
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W48 | — | 0.5 | OEM-E9-71 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | — | — | — | — | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W49 | — | 0.5 | OEM-E9-72 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | — | — | — | — | — | — | — |
| E4 | Injection 9 | — | W58 | — | 0.5 | OEM-E9-74 | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
MAIN-R
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| COIL+ | Relay coil positive (ignition-switched +12V) | — | W2 | — | 0.5 | OEM-E10-1 | — | — | — |
| COIL- | Relay coil negative (ECU low-side driver) | — | W4 | — | 0.5 | SP-GND-1 | — | — | — |
| IN | Relay contact input (battery + via main fuse) | — | W3 | — | 0.85 | NEW-BATT-1 | — | — | — |
| OUT | Relay contact output (switched +12V bus) | — | W5 | — | 0.85 | G5VOODOOPROV-A-5 | — | — | — |
| OUT | Relay contact output (switched +12V bus) | — | W6 | — | 0.85 | G5VOODOOPROV-B-5 | — | — | — |
NEW-BATT
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W3 | — | 0.85 | MAIN-R-IN | — | — | — |
NEW-KEYON
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W68 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
OEM-E10
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition switch (IGSW) | — | W2 | — | 0.5 | MAIN-R-COIL+ | — | — | — |
| 15 | Electrical load sensor (ELS) | — | W65 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
| 16 | Tachometer output | — | — | — | — | — | — | — | — |
| 2 | Vehicle speed sensor (SP1) | — | W62 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 21 | Fuel pump diagnostic (DI) | — | W63 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 22 | Fuel pump control (FPC) | — | W50 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 23 | A/C clutch relay (ACMG) | — | W46 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 24 | Main relay control (M-REL) | — | W47 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 31 | ECU power +B (main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 33 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 4 | Brake switch (STP) | — | W66 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 6 | Malfunction indicator lamp (MIL) | — | W51 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
OEM-E9
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 15 | Injector 6 | — | W42 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 16 | Injector 5 | — | W41 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 17 | Injector 4 | — | W40 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 18 | Injector 3 | — | W39 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 19 | Injector 2 | — | W38 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 20 | Injector 1 | — | W37 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 25 | Camshaft position 2 (G2) | — | W28 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 26 | Camshaft position 1 (G1) | — | W27 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 27 | Crank position (NE) | — | W26 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 32 | ISC stepper winding | — | W52 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 33 | ISC stepper winding | — | W53 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 34 | ISC stepper winding | — | W54 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 35 | ISC stepper winding | — | W55 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 4 | Power ground (E11) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 41 | Sensor supply +5V (VCC) | — | W25 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
| 43 | Throttle position (VTA1) | — | W44 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 44 | Coolant temperature (THW) | — | W45 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 45 | Intake air temperature (THA) | — | W61 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 47 | O2 sensor 2 (OX2) | — | W59 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 48 | O2 sensor 1 (OX1) | — | W60 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 49 | Knock sensor 2 (KNK2) | — | W30 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 5 | Cam sensor 2 ground (G2-) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 50 | Knock sensor 1 (KNK1) | — | W29 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 52 | Ignition 6 (IGT6) | — | W36 | — | 0.5 | G5VOODOOPROV-B-B12 | — | — | — |
| 53 | Ignition 5 (IGT5) | — | W35 | — | 0.5 | G5VOODOOPROV-B-B13 | — | — | — |
| 54 | Ignition 4 (IGT4) | — | W34 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 55 | Ignition 3 (IGT3) | — | W33 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 56 | Ignition 2 (IGT2) | — | W32 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 57 | Ignition 1 (IGT1) | — | W31 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 58 | Ignition confirmation (IGF) | — | W64 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 6 | Cam sensor 1 ground (G1-) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 60 | Wastegate VSV (boost control) | — | W56 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 62 | MAP sensor (PIM) | — | W43 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 65 | Sensor ground (E2) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 69 | ECU power ground (E1) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Crank sensor ground (NE-) | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 71 | O2 heater 1 (HT1) | — | W48 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 72 | O2 heater 2 (HT2) | — | W49 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 73 | Fuel pressure-up VSV (FPU) | — | W57 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 74 | Purge VSV (EVAP) | — | W58 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 76 | Starter signal (STA) | — | W67 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 78 | Power ground (E01) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 79 | Power ground (E01/E02) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 80 | Power ground (E01/E02) | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W18 | — | 0.5 | OEM-E9-5 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-E9-6 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-E9-65 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-E9-7 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | G5VOODOOPROV-A-24 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | G5VOODOOPROV-A-7 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | G5VOODOOPROV-B-17 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E10-31 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.5 | MAIN-R-COIL- | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-E9-4 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-E9-69 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-E9-78 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-E9-79 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-E9-80 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | G5VOODOOPROV-A-25 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | G5VOODOOPROV-A-34 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | G5VOODOOPROV-B-25 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | G5VOODOOPROV-B-34 | — | — | — |
| 1 | — | — | W16 | — | 0.85 | G5VOODOOPROV-E-21 | — | — | — |
| 1 | — | — | W17 | — | 0.85 | G5VOODOOPROV-E-7 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E10-1 | Ignition switch (IGSW) | digital_in | MAIN-R-COIL+ | Relay coil positive (ignition-switched +12V) | power_in | corroborated | |
| OEM-E10-15 | Electrical load sensor (ELS) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-E10-16 | Tachometer output | tacho_out | — | — | — | corroborated | |
| OEM-E10-2 | Vehicle speed sensor (SP1) | digital_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | corroborated | |
| OEM-E10-21 | Fuel pump diagnostic (DI) | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-E10-22 | Fuel pump control (FPC) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | corroborated | |
| OEM-E10-23 | A/C clutch relay (ACMG) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | corroborated | |
| OEM-E10-24 | Main relay control (M-REL) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | corroborated | |
| OEM-E10-31 | ECU power +B (main relay) | power_in | — | — | — | corroborated | |
| OEM-E10-33 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-E10-4 | Brake switch (STP) | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-E10-6 | Malfunction indicator lamp (MIL) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | corroborated | |
| OEM-E9-15 | Injector 6 | injector_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | corroborated | |
| OEM-E9-16 | Injector 5 | injector_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | corroborated | |
| OEM-E9-17 | Injector 4 | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | corroborated | |
| OEM-E9-18 | Injector 3 | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | corroborated | |
| OEM-E9-19 | Injector 2 | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | corroborated | |
| OEM-E9-20 | Injector 1 | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | corroborated | |
| OEM-E9-25 | Camshaft position 2 (G2) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | corroborated | |
| OEM-E9-26 | Camshaft position 1 (G1) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | corroborated | |
| OEM-E9-27 | Crank position (NE) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | corroborated | |
| OEM-E9-32 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | corroborated | |
| OEM-E9-33 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | corroborated | |
| OEM-E9-34 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | corroborated | |
| OEM-E9-35 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | corroborated | |
| OEM-E9-4 | Power ground (E11) | ground | G5VOODOOPROV-A-25 + G5VOODOOPROV-A-34 + G5VOODOOPROV-B-25 + G5VOODOOPROV-B-34 + G5VOODOOPROV-E-21 + G5VOODOOPROV-E-7 + MAIN-R-COIL- | Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Relay coil negative (ECU low-side driver) | ground + load | single_source | |
| OEM-E9-41 | Sensor supply +5V (VCC) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-E9-43 | Throttle position (VTA1) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | corroborated | |
| OEM-E9-44 | Coolant temperature (THW) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | corroborated | |
| OEM-E9-45 | Intake air temperature (THA) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | corroborated | |
| OEM-E9-47 | O2 sensor 2 (OX2) | lambda_nb_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | single_source | |
| OEM-E9-48 | O2 sensor 1 (OX1) | lambda_nb_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | corroborated | |
| OEM-E9-49 | Knock sensor 2 (KNK2) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | corroborated | |
| OEM-E9-5 | Cam sensor 2 ground (G2-) | sensor_ground | G5VOODOOPROV-A-24 + G5VOODOOPROV-A-7 + G5VOODOOPROV-B-17 | Sensor Gnd + Sensor Gnd / Shield + Shield / Gnd | sensor_ground | corroborated | |
| OEM-E9-50 | Knock sensor 1 (KNK1) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | corroborated | |
| OEM-E9-52 | Ignition 6 (IGT6) | ignition_out | G5VOODOOPROV-B-B12 | Ignition 6 | ignition_out | corroborated | |
| OEM-E9-53 | Ignition 5 (IGT5) | ignition_out | G5VOODOOPROV-B-B13 | Ignition 5 | ignition_out | corroborated | |
| OEM-E9-54 | Ignition 4 (IGT4) | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | corroborated | |
| OEM-E9-55 | Ignition 3 (IGT3) | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | corroborated | |
| OEM-E9-56 | Ignition 2 (IGT2) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | corroborated | |
| OEM-E9-57 | Ignition 1 (IGT1) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | corroborated | |
| OEM-E9-58 | Ignition confirmation (IGF) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-E9-6 | Cam sensor 1 ground (G1-) | sensor_ground | G5VOODOOPROV-A-24 + G5VOODOOPROV-A-7 + G5VOODOOPROV-B-17 | Sensor Gnd + Sensor Gnd / Shield + Shield / Gnd | sensor_ground | corroborated | |
| OEM-E9-60 | Wastegate VSV (boost control) | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-E9-62 | MAP sensor (PIM) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-E9-65 | Sensor ground (E2) | sensor_ground | G5VOODOOPROV-A-24 + G5VOODOOPROV-A-7 + G5VOODOOPROV-B-17 | Sensor Gnd + Sensor Gnd / Shield + Shield / Gnd | sensor_ground | corroborated | |
| OEM-E9-69 | ECU power ground (E1) | ground | G5VOODOOPROV-A-25 + G5VOODOOPROV-A-34 + G5VOODOOPROV-B-25 + G5VOODOOPROV-B-34 + G5VOODOOPROV-E-21 + G5VOODOOPROV-E-7 + MAIN-R-COIL- | Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Relay coil negative (ECU low-side driver) | ground + load | corroborated | |
| OEM-E9-7 | Crank sensor ground (NE-) | sensor_ground | G5VOODOOPROV-A-24 + G5VOODOOPROV-A-7 + G5VOODOOPROV-B-17 | Sensor Gnd + Sensor Gnd / Shield + Shield / Gnd | sensor_ground | corroborated | |
| OEM-E9-71 | O2 heater 1 (HT1) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-E9-72 | O2 heater 2 (HT2) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source | |
| OEM-E9-73 | Fuel pressure-up VSV (FPU) | low_side_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | single_source | |
| OEM-E9-74 | Purge VSV (EVAP) | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | single_source | |
| OEM-E9-76 | Starter signal (STA) | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-E9-78 | Power ground (E01) | ground | G5VOODOOPROV-A-25 + G5VOODOOPROV-A-34 + G5VOODOOPROV-B-25 + G5VOODOOPROV-B-34 + G5VOODOOPROV-E-21 + G5VOODOOPROV-E-7 + MAIN-R-COIL- | Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Relay coil negative (ECU low-side driver) | ground + load | single_source | |
| OEM-E9-79 | Power ground (E01/E02) | ground | G5VOODOOPROV-A-25 + G5VOODOOPROV-A-34 + G5VOODOOPROV-B-25 + G5VOODOOPROV-B-34 + G5VOODOOPROV-E-21 + G5VOODOOPROV-E-7 + MAIN-R-COIL- | Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Relay coil negative (ECU low-side driver) | ground + load | corroborated | |
| OEM-E9-80 | Power ground (E01/E02) | ground | G5VOODOOPROV-A-25 + G5VOODOOPROV-A-34 + G5VOODOOPROV-B-25 + G5VOODOOPROV-B-34 + G5VOODOOPROV-E-21 + G5VOODOOPROV-E-7 + MAIN-R-COIL- | Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Power Ground + Relay coil negative (ECU low-side driver) | ground + load | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E10-31 | SP-14V-1 | 0.85 | no route | ECU power +B (main relay) | — | |
| W2 | OEM-E10-1 | MAIN-R-COIL+ | 0.5 | no route | Ignition switch (IGSW) | — | |
| W3 | NEW-BATT-1 | MAIN-R-IN | 0.85 | no route | Relay contact input (battery + via main fuse) | — | |
| W4 | MAIN-R-COIL- | SP-GND-1 | 0.5 | no route | Relay coil negative (ECU low-side driver) | — | |
| W5 | MAIN-R-OUT | G5VOODOOPROV-A-5 | 0.85 | no route | Relay contact output (switched +12V bus) | — | |
| W6 | MAIN-R-OUT | G5VOODOOPROV-B-5 | 0.85 | no route | Relay contact output (switched +12V bus) | — | |
| W7 | OEM-E9-4 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W8 | OEM-E9-69 | SP-GND-1 | 0.85 | no route | ECU power ground (E1) | — | |
| W9 | OEM-E9-78 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W10 | OEM-E9-79 | SP-GND-1 | 0.85 | no route | Power ground (E01/E02) | — | |
| W11 | OEM-E9-80 | SP-GND-1 | 0.85 | no route | Power ground (E01/E02) | — | |
| W12 | SP-GND-1 | G5VOODOOPROV-A-25 | 0.85 | no route | Power Ground | — | |
| W13 | SP-GND-1 | G5VOODOOPROV-A-34 | 0.85 | no route | Power Ground | — | |
| W14 | SP-GND-1 | G5VOODOOPROV-B-25 | 0.85 | no route | Power Ground | — | |
| W15 | SP-GND-1 | G5VOODOOPROV-B-34 | 0.85 | no route | Power Ground | — | |
| W16 | SP-GND-1 | G5VOODOOPROV-E-21 | 0.85 | no route | Power Ground | — | |
| W17 | SP-GND-1 | G5VOODOOPROV-E-7 | 0.85 | no route | Power Ground | — | |
| W18 | OEM-E9-5 | SP-0V-1 | 0.5 | no route | Cam sensor 2 ground (G2-) | — | |
| W19 | OEM-E9-6 | SP-0V-1 | 0.5 | no route | Cam sensor 1 ground (G1-) | — | |
| W20 | OEM-E9-65 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W21 | OEM-E9-7 | SP-0V-1 | 0.5 | no route | Crank sensor ground (NE-) | — | |
| W22 | SP-0V-1 | G5VOODOOPROV-A-24 | 0.5 | no route | Sensor Gnd | — | |
| W23 | SP-0V-1 | G5VOODOOPROV-A-7 | 0.5 | no route | Sensor Gnd / Shield | — | |
| W24 | SP-0V-1 | G5VOODOOPROV-B-17 | 0.5 | no route | Shield / Gnd | — | |
| W25 | OEM-E9-41 | G5VOODOOPROV-A-A32 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W26 | OEM-E9-27 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position (NE) | — | |
| W27 | OEM-E9-26 | G5VOODOOPROV-A-A9 | 0.5 | no route | Camshaft position 1 (G1) | — | |
| W28 | OEM-E9-25 | G5VOODOOPROV-A-A30 | 0.5 | no route | Camshaft position 2 (G2) | — | |
| W29 | OEM-E9-50 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W30 | OEM-E9-49 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W31 | OEM-E9-57 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W32 | OEM-E9-56 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W33 | OEM-E9-55 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition 3 (IGT3) | — | |
| W34 | OEM-E9-54 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition 4 (IGT4) | — | |
| W35 | OEM-E9-53 | G5VOODOOPROV-B-B13 | 0.5 | no route | Ignition 5 (IGT5) | — | |
| W36 | OEM-E9-52 | G5VOODOOPROV-B-B12 | 0.5 | no route | Ignition 6 (IGT6) | — | |
| W37 | OEM-E9-20 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 | — | |
| W38 | OEM-E9-19 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 | — | |
| W39 | OEM-E9-18 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 | — | |
| W40 | OEM-E9-17 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4 | — | |
| W41 | OEM-E9-16 | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector 5 | — | |
| W42 | OEM-E9-15 | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector 6 | — | |
| W43 | OEM-E9-62 | G5VOODOOPROV-A-A17 | 0.5 | no route | MAP sensor (PIM) | — | |
| W44 | OEM-E9-43 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position (VTA1) | — | |
| W45 | OEM-E9-44 | G5VOODOOPROV-A-A15 | 0.5 | no route | Coolant temperature (THW) | — | |
| W46 | OEM-E10-23 | G5VOODOOPROV-A-A21 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W47 | OEM-E10-24 | G5VOODOOPROV-A-A20 | 0.5 | no route | Main relay control (M-REL) | — | |
| W48 | OEM-E9-71 | G5VOODOOPROV-E-E15 | 0.5 | no route | O2 heater 1 (HT1) | — | |
| W49 | OEM-E9-72 | G5VOODOOPROV-E-E22 | 0.5 | no route | O2 heater 2 (HT2) | — | |
| W50 | OEM-E10-22 | G5VOODOOPROV-A-A19 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W51 | OEM-E10-6 | G5VOODOOPROV-A-A18 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W52 | OEM-E9-32 | G5VOODOOPROV-A-A29 | 0.5 | no route | ISC stepper winding | — | |
| W53 | OEM-E9-33 | G5VOODOOPROV-A-A28 | 0.5 | no route | ISC stepper winding | — | |
| W54 | OEM-E9-34 | G5VOODOOPROV-A-A27 | 0.5 | no route | ISC stepper winding | — | |
| W55 | OEM-E9-35 | G5VOODOOPROV-A-A26 | 0.5 | no route | ISC stepper winding | — | |
| W56 | OEM-E9-60 | G5VOODOOPROV-B-B2 | 0.5 | no route | Wastegate VSV (boost control) | — | |
| W57 | OEM-E9-73 | G5VOODOOPROV-B-B1 | 0.5 | no route | Fuel pressure-up VSV (FPU) | — | |
| W58 | OEM-E9-74 | G5VOODOOPROV-E-E4 | 0.5 | no route | Purge VSV (EVAP) | — | |
| W59 | OEM-E9-47 | G5VOODOOPROV-A-A33 | 0.5 | no route | O2 sensor 2 (OX2) | — | |
| W60 | OEM-E9-48 | G5VOODOOPROV-A-A14 | 0.5 | no route | O2 sensor 1 (OX1) | — | |
| W61 | OEM-E9-45 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (THA) | — | |
| W62 | OEM-E10-2 | G5VOODOOPROV-A-A31 | 0.5 | no route | Vehicle speed sensor (SP1) | — | |
| W63 | OEM-E10-21 | G5VOODOOPROV-A-A23 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W64 | OEM-E9-58 | G5VOODOOPROV-B-B21 | 0.5 | no route | Ignition confirmation (IGF) | — | |
| W65 | OEM-E10-15 | G5VOODOOPROV-B-B20 | 0.5 | no route | Electrical load sensor (ELS) | — | |
| W66 | OEM-E10-4 | G5VOODOOPROV-B-B19 | 0.5 | no route | Brake switch (STP) | — | |
| W67 | OEM-E9-76 | G5VOODOOPROV-B-B30 | 0.5 | no route | Starter signal (STA) | — | |
| W68 | NEW-KEYON-1 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition Switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (13)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | INJECTOR_BALLAST | G5 Voodoo Pro V1 | The 2JZ-GTE injectors (2JZ-GTE fuel injector) are low-impedance, but G5 Voodoo Pro V1 drives saturated (high-Z) injectors only. Add a ballast resistor pack in series with each injector, or use an ECU with low-Z / peak-and-hold injector drivers. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A20 | G5VOODOOPROV-A-A20 "Aux 2" drives OEM-E10-24 Main relay control (M-REL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-E10-23 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-E9-25 ↔ G5VOODOOPROV-A-A30 | OEM-E9-25 "Camshaft position 2 (G2)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-E10-1 ↔ MAIN-R-COIL+ | OEM-E10-1 "Ignition switch (IGSW)" [digital_in] is wired to MAIN-R-COIL+ "Relay coil positive (ignition-switched +12V)" [power_in]. Switched supply used as the ignition-on sense. |
| info | NET_FAMILY | OEM-E9-32 ↔ G5VOODOOPROV-A-A29 | OEM-E9-32 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-33 ↔ G5VOODOOPROV-A-A28 | OEM-E9-33 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-34 ↔ G5VOODOOPROV-A-A27 | OEM-E9-34 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-35 ↔ G5VOODOOPROV-A-A26 | OEM-E9-35 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-60 ↔ G5VOODOOPROV-B-B2 | OEM-E9-60 "Wastegate VSV (boost control)" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-73 ↔ G5VOODOOPROV-B-B1 | OEM-E9-73 "Fuel pressure-up VSV (FPU)" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-74 ↔ G5VOODOOPROV-E-E4 | OEM-E9-74 "Purge VSV (EVAP)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 1 optional OEM pins are not mapped: OEM-E10-16 Tachometer output |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E10-33 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: needs add-on. Resolve these before building: - Low-impedance injectors need a ballast resistor pack in series with each injector, or an ECU with low-Z / peak-and-hold injector drivers - Main power feed not sourced — G5 Voodoo Pro V1's relay-fed power input is drawn through the main relay, but the feed's fuse rating is not in the library yet Auto-mapped by auto_map() from the library pin data on 2026-10-20. Review every wire against both manuals before building. Not wired: - OEM-E10 33: Battery constant (BATT): Link G5 Voodoo Pro V1 has no battery-constant memory input; not needed - OEM-E10 16: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on Link G5 Voodoo Pro V1
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER: ECU2JZ JZA80 2JZ-GTE adapter technical information (knock sensor count) | https://drive.google.com/file/d/15sTEetwLt0aKjuQo6aXODn4EBAkEJrtN/view | archive | 2026-10-05 | 6a4adabba0f5 |
| 4 | vendor_doc | Emtron SL4/SL6/SL8 pinout pages | https://docs.emtronaustralia.com.au/engine-management/wiring/index.html | archive | 2026-10-05 | e52b3da9996a |
| 4 | vendor_doc | G5 Voodoo Pro V1 Quick Start Guide, Version 1.0 | https://kb.linkecu.com/__attachments/a_799c9660e24430aba47c7b062abe1c22afe25af8135cfd2ff1448e5769a0de6e/G5%20Voodoo%20Pro%20V1%20QS.pdf | — | — | — |
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Pinouts (KB, V1) | https://kb.linkecu.com/ecu-kb/latest/g5-voodoo-pro-v1-pinouts | — | — | — |
| 4 | vendor_doc | Link SupraLink TS2JZX install manual (JZA80 2JZ-GTE non-VVT) | https://linkecu.com/documentation/TS2JZX.pdf | — | — | — |
| 4 | service_manual | Toyota FSM P1300 Igniter Circuit (2JZ-GTE) — IGT1-6 / IGF ECM terminals | http://97supraturbo.com/Trouble%20Codes/P1300%20Ignitor.pdf | — | — | — |
| 3 | forum | rusEFI Mazda Miata 2002 engine wiring | https://github.com/rusefi/rusefi/wiki/Mazda-Miata-2002 | archive | 2026-10-05 | cc3cae670408 |