Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
Components
| Ref | Kind | Part | Exclude from BOM |
|---|---|---|---|
| OEM-X | connector | ||
| SP-0V | splice | ||
| SP-14V | splice | ||
| SP-GND | splice | ||
| T8-C1 | connector | ||
| T8-C2 | connector | ||
| T8-C3 | connector |
Create part
Cut list
Lengths need a layout (0 of 46 routed).
| Wire | From / To | Gauge | Signal |
|---|---|---|---|
| W1 | OEM-X-54 / SP-14V-1 | 0.85 | ECU power (+14V from main relay) |
| W2 | SP-14V-1 / T8-C1-31 | 0.85 | Ignition 12v In |
| W3 | OEM-X-26 / T8-C3-26 | 0.85 | Battery voltage (constant +12V) |
| W4 | OEM-X-15 / SP-GND-1 | 0.85 | Ground |
| W5 | OEM-X-34 / SP-GND-1 | 0.85 | Ground (output stages) |
| W6 | OEM-X-55 / SP-GND-1 | 0.85 | Ground (ignition) |
| W7 | OEM-X-6 / SP-GND-1 | 0.85 | Ground (injector output stages) |
| W8 | SP-GND-1 / T8-C1-13 | 0.85 | Power Ground 1 |
| W9 | SP-GND-1 / T8-C1-14 | 0.85 | Power Ground 2 |
| W10 | OEM-X-28 / SP-0V-1 | 0.5 | Ground (electronics + sensor shielding) |
| W11 | OEM-X-40 / SP-0V-1 | 0.5 | O2 sensor signal ground |
| W12 | OEM-X-43 / SP-0V-1 | 0.5 | Crank position sensor (-) |
| W13 | OEM-X-44 / SP-0V-1 | 0.5 | Sensor ground (IAT/ECT/TPS) |
| W14 | OEM-X-71 / SP-0V-1 | 0.5 | Knock sensor ground/shield |
| W15 | SP-0V-1 / T8-C2-21 | 0.5 | Sensor Ground |
| W16 | SP-0V-1 / T8-C2-33 | 0.5 | Sensor Ground |
| W17 | OEM-X-59 / T8-C2-24 | 0.5 | +5V sensor supply |
| W18 | OEM-X-16 / T8-C2-12 | 0.5 | Crank position sensor (+) |
| W19 | OEM-X-17 / T8-C2-22 | 0.5 | Camshaft position sensor (Hall) |
| W20 | OEM-X-50 / T8-C1-10 | 0.5 | Ignition coil cylinder 1 |
| W21 | OEM-X-51 / T8-C1-18 | 0.5 | Ignition coil cylinder 2 |
| W22 | OEM-X-52 / T8-C1-1 | 0.5 | Ignition coil cylinder 3 |
| W23 | OEM-X-23 / T8-C1-26 | 0.5 | Ignition coil cylinder 4 |
| W24 | OEM-X-25 / T8-C1-11 | 0.5 | Ignition coil cylinder 5 |
| W25 | OEM-X-24 / T8-C1-27 | 0.5 | Ignition coil cylinder 6 |
| W26 | OEM-X-33 / T8-C1-9 | 0.5 | Injector cylinder 1 |
| W27 | OEM-X-32 / T8-C1-17 | 0.5 | Injector cylinder 2 |
| W28 | OEM-X-31 / T8-C1-34 | 0.5 | Injector cylinder 3 |
| W29 | OEM-X-5 / T8-C1-25 | 0.5 | Injector cylinder 4 |
| W30 | OEM-X-3 / T8-C1-16 | 0.5 | Injector cylinder 5 |
| W31 | OEM-X-4 / T8-C1-15 | 0.5 | Injector cylinder 6 |
| W32 | OEM-X-1 / T8-C1-5 | 0.5 | Fuel pump relay control |
| W33 | OEM-X-27 / T8-C1-4 | 0.5 | Main relay control |
| W34 | OEM-X-38 / T8-C3-9 | 0.5 | O2 sensor heater relay control |
| W35 | OEM-X-2 / T8-C1-3 | 0.5 | Idle speed control valve (close winding) |
| W36 | OEM-X-29 / T8-C3-22 | 0.5 | Idle speed control valve (open winding) |
| W37 | OEM-X-36 / T8-C3-23 | 0.5 | Evap purge solenoid |
| W38 | OEM-X-7 / T8-C3-24 | 0.5 | VANOS intake camshaft solenoid |
| W39 | OEM-X-8 / T8-C3-25 | 0.5 | Check engine light (MIL) |
| W40 | OEM-X-47 / T8-C3-10 | 0.5 | Tachometer output |
| W41 | OEM-X-41 / T8-C2-10 | 0.5 | Mass air flow (MAF) signal |
| W42 | OEM-X-73 / T8-C2-1 | 0.5 | Throttle position (TPS) |
| W43 | OEM-X-13 / T8-C2-5 | 0.5 | O2 sensor signal |
| W44 | OEM-X-78 / T8-C2-7 | 0.5 | Engine coolant temperature (ECT) |
| W45 | OEM-X-77 / T8-C2-25 | 0.5 | Intake air temperature (IAT) |
| W46 | OEM-X-42 / T8-C2-2 | 0.5 | Vehicle speed signal |
Bill of materials
No wire parts assigned: 46 wires need a wire part.
| Part number | Manufacturer | Description | Qty | Unit | Unit price |
|---|---|---|---|---|---|
| connector1 line | |||||
| BMW-E36-DME-CONN | BMW | E36 DME (M3.1/M3.3.1) harness connector | 1 | ea | |