‹ HarnessesdraftCompare ECUsSign in to save your own copy
Menu

Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.

Install modifications

Steps on the car itself, outside the harness. Every harness for this car inherits them.

  • Re-route the pressure-sensor vacuum hose to the intake manifoldrequired

    Re-route the pressure sensor's (Mazda "EGR boost sensor", pin 4AE) vacuum hose directly to the intake manifold, bypassing the EGR boost solenoid. The stock ECU multiplexes baro + MAP through that solenoid: with it off the sensor reads atmosphere, with it energized it reads manifold. After re-routing the sensor reads MAP only, so the standalone needs its own barometric source — its onboard baro sensor if fitted, or a separate baro sensor on a spare analog input. (Alternative, not recommended: keep the hose stock and have the ECU energize the solenoid permanently via a low-side output switched with ignition; this costs an output.)

    Why: With the solenoid off (its default) the sensor reads atmospheric pressure, not manifold pressure, so a standalone that uses this sensor as its MAP input would read the wrong value.

    Where: EGR boost solenoid and the pressure sensor's vacuum hose (sensor signal 4AE).

    Source: Justin Barrera — Miata NA/NB wiring corrections

Components

RefKindPartExclude from BOM
OEM-2connector
OEM-3connector
OEM-4connector
SP-0Vsplice
SP-14Vsplice
SP-GNDsplice
T8-C1connector
T8-C2connector
T8-C3connector

Create part

Cut list

Lengths need a layout (0 of 53 routed).

WireFrom / ToGaugeSignal
W1OEM-2-P / SP-14V-10.85ISC valve +14V feed
W2OEM-4-AF / SP-14V-10.85ECU power +14V (main relay)
W3SP-14V-1 / T8-C1-310.85Ignition 12v In
W4OEM-4-AG / T8-C3-260.85Constant +12V
W5OEM-3-A / SP-GND-10.85Power ground
W6OEM-3-B / SP-GND-10.85Power ground
W7OEM-4-A / SP-GND-10.85Power ground
W8SP-GND-1 / T8-C1-130.85Power Ground 1
W9SP-GND-1 / T8-C1-140.85Power Ground 2
W10OEM-4-O / SP-0V-10.5Signal ground
W11SP-0V-1 / T8-C2-210.5Sensor Ground
W12SP-0V-1 / T8-C2-330.5Sensor Ground
W13OEM-4-L / T8-C2-240.5+5V sensor supply
W14OEM-3-Y / T8-C2-120.5Crank position (CKP)
W15OEM-3-V / T8-C2-220.5Cam position (CMP)
W16OEM-3-F / T8-C1-100.5Ignition 1 (coils 1+4, wasted spark)
W17OEM-3-I / T8-C1-180.5Ignition 2 (coils 2+3, wasted spark)
W18OEM-2-A / T8-C1-90.5Injector 1
W19OEM-2-D / T8-C1-170.5Injector 2
W20OEM-2-G / T8-C1-340.5Injector 3
W21OEM-2-J / T8-C1-250.5Injector 4
W22OEM-2-B / T8-C1-50.5Cooling fan relay
W23OEM-2-C / T8-C1-40.5Condenser fan relay
W24OEM-2-K / T8-C1-30.5A/C clutch relay
W25OEM-2-M / T8-C3-220.5Fuel pump relay
W26OEM-3-H / T8-C3-230.5Main relay
W27OEM-3-J / T8-C3-90.5Front O2 heater
W28OEM-3-P / T8-C3-30.5Rear O2 heater
W29OEM-2-Q / T8-C3-240.5ISC valve low side
W30OEM-2-E / T8-C3-250.5EGR valve
W31OEM-2-F / T8-C3-100.5EGR valve
W32OEM-2-H / T8-C3-40.5EGR valve
W33OEM-2-I / T8-C3-280.5EGR valve
W34OEM-2-N / T8-C1-160.5VTCS solenoid (intake butterflies)
W35OEM-2-R / T8-C1-150.5Malfunction indicator lamp (MIL)
W36OEM-3-E / T8-C1-240.5Charcoal canister purge
W37OEM-3-M / T8-C1-230.5Alternator control
W38OEM-4-X / T8-C2-100.5Mass air flow (MAF)
W39OEM-4-AE / T8-C2-10.5Pressure sensor (Mazda: EGR boost sensor)
W40OEM-4-V / T8-C2-50.5Throttle position (TPS)
W41OEM-4-AA / T8-C2-60.5Rear O2 signal
W42OEM-4-W / T8-C2-180.5Front O2 signal
W43OEM-4-P / T8-C2-70.5Coolant temperature (ECT)
W44OEM-4-N / T8-C2-250.5Intake air temperature (IAT)
W45OEM-4-AD / T8-C2-190.5Fuel level
W46OEM-3-T / T8-C2-20.5Vehicle speed
W47OEM-3-S / T8-C2-40.5Immobiliser
W48OEM-4-B / T8-C2-80.5Brake switch
W49OEM-4-C / T8-C2-110.5Power steering pressure switch
W50OEM-4-F / T8-C2-140.5A/C request
W51OEM-4-H / T8-C2-150.5Neutral switch
W52OEM-4-I / T8-C2-270.5Clutch switch
W53OEM-4-J / T8-C2-200.5VTCS vacuum switch

Bill of materials

No parts in this harness.