Toyota Supra A70 1986-92 (7M-GTE) → MaxxECU MaxxECU GEN2 RACE (auto)
Toyota Supra A70 1986-92 (7M-GTE) — MaxxECU — MaxxECU GEN2 RACE
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-23
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 24 wires · 10 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-D-12 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-D-13 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | MAXXECUGEN2R-MX1-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | MAXXECUGEN2R-MX2-25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A-26 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | SP-GND-1 | MAXXECUGEN2R-MX1-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | MAXXECUGEN2R-MX2-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | MAXXECUGEN2R-MX3-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-B-9 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-0V-1 | MAXXECUGEN2R-MX1-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-D-5 | MAXXECUGEN2R-MX2-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-A-12 | MAXXECUGEN2R-MX1-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-A-11 | MAXXECUGEN2R-MX1-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-A-25 | MAXXECUGEN2R-MX1-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-D-4 | MAXXECUGEN2R-MX1-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-B-11 | MAXXECUGEN2R-MX1-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-B-4 | MAXXECUGEN2R-MX1-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-D-2 | MAXXECUGEN2R-MX1-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B-6 | MAXXECUGEN2R-MX1-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-D-3 | MAXXECUGEN2R-MX1-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-D-9 | MAXXECUGEN2R-MX1-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-D-10 | MAXXECUGEN2R-MX4-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-D-11 | MAXXECUGEN2R-MX4-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-D-22 | MAXXECUGEN2R-MX4-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | MAXXECUGEN2R-MX1-14 | MAXXECUGEN2R-MX1-25 | open (OL) | sensor ground must not touch +12 V supply | |
| 2 | MAXXECUGEN2R-MX1-9 | MAXXECUGEN2R-MX1-25 | open (OL) | power ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
MAXXECUGEN2R-MX1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 1 | — | — | — | — | — | — | — | — |
| 10 | Digital/VR 1 SIGNAL + | — | — | — | — | — | — | — | — |
| 11 | Digital/VR 1 SIGNAL - | — | — | — | — | — | — | — | — |
| 12 | Digital/VR 1 POWER SUPPLY | — | — | — | — | — | — | — | — |
| 13 | Digital/VR 1 SHIELD | — | — | — | — | — | — | — | — |
| 14 | SENSOR GND | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | CAN L | — | — | — | — | — | — | — | — |
| 16 | CAN H | — | — | — | — | — | — | — | — |
| 17 | GP out 5 (GND) | — | — | — | — | — | — | — | — |
| 18 | Digital/VR 2 SIGNAL + | — | — | — | — | — | — | — | — |
| 19 | Digital/VR 2 SIGNAL - | — | — | — | — | — | — | — | — |
| 2 | Ignition 2 | — | — | — | — | — | — | — | — |
| 20 | Digital/VR 2 POWER SUPPLY | — | — | — | — | — | — | — | — |
| 21 | Digital/VR 2 SHIELD | — | — | — | — | — | — | — | — |
| 22 | 5V power supply | — | — | — | — | — | — | — | — |
| 23 | Digital/VR 3 SIGNAL + | — | W18 | — | 0.5 | OEM-D-2 | — | — | — |
| 24 | Digital/VR 4 SIGNAL + | — | W21 | — | 0.5 | OEM-D-9 | — | — | — |
| 25 | 12V supply 1 | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | AIN 1 | — | W16 | — | 0.5 | OEM-B-11 | — | — | — |
| 27 | AIN 2 | — | W17 | — | 0.5 | OEM-B-4 | — | — | — |
| 28 | AIN 3 | — | W19 | — | 0.5 | OEM-B-6 | — | — | — |
| 29 | AIN 4 | — | W20 | — | 0.5 | OEM-D-3 | — | — | — |
| 3 | Ignition 3 | — | — | — | — | — | — | — | — |
| 30 | AIN 5 | — | — | — | — | — | — | — | — |
| 31 | INJECTOR 1 | — | W12 | — | 0.5 | OEM-A-12 | — | — | — |
| 32 | INJECTOR 2 | — | W13 | — | 0.5 | OEM-A-11 | — | — | — |
| 33 | INJECTOR 3 | — | W14 | — | 0.5 | OEM-A-25 | — | — | — |
| 34 | INJECTOR 4 | — | — | — | — | — | — | — | — |
| 4 | Ignition 4 | — | — | — | — | — | — | — | — |
| 5 | GP out 1 (GND) | — | W15 | — | 0.5 | OEM-D-4 | — | — | — |
| 6 | GP out 2 (GND) | — | — | — | — | — | — | — | — |
| 7 | GP out 3 (GND) | — | — | — | — | — | — | — | — |
| 8 | GP out 4 (GND) | — | — | — | — | — | — | — | — |
| 9 | Engine gnd | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 5 | — | — | — | — | — | — | — | — |
| 10 | WBO2 Sensor 1 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 Sensor 1 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP OUT 7 / WBO2 Sensor 1 H- | — | — | — | — | — | — | — | — |
| 13 | AIN 9 | — | — | — | — | — | — | — | — |
| 14 | AIN 10 | — | — | — | — | — | — | — | — |
| 15 | AIN 11 | — | — | — | — | — | — | — | — |
| 16 | AIN 12 | — | — | — | — | — | — | — | — |
| 17 | AIN 13 | — | — | — | — | — | — | — | — |
| 18 | WBO2 sensor 1 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 1 IP | — | — | — | — | — | — | — | — |
| 2 | Ignition 6 | — | — | — | — | — | — | — | — |
| 20 | 12V WBO2 sensor 1 H+ | — | — | — | — | — | — | — | — |
| 21 | WBO2 sensor 1 SHIELD | — | — | — | — | — | — | — | — |
| 22 | AIN 14 | — | — | — | — | — | — | — | — |
| 23 | AIN 15 | — | — | — | — | — | — | — | — |
| 24 | 12V supply 3 | — | — | — | — | — | — | — | — |
| 25 | 12V supply 2 | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 26 | KNOCK1 SHIELD | — | — | — | — | — | — | — | — |
| 27 | KNOCK 1- | — | — | — | — | — | — | — | — |
| 28 | KNOCK 1+ | — | W11 | — | 0.5 | OEM-D-5 | — | — | — |
| 29 | KNOCK 2 SHIELD | — | — | — | — | — | — | — | — |
| 3 | GP out 6 (GND) | — | — | — | — | — | — | — | — |
| 30 | KNOCK 2- | — | — | — | — | — | — | — | — |
| 31 | KNOCK 2+ | — | — | — | — | — | — | — | — |
| 32 | AIN 16 | — | — | — | — | — | — | — | — |
| 33 | INJECTOR 5 | — | — | — | — | — | — | — | — |
| 34 | INJECTOR 6 | — | — | — | — | — | — | — | — |
| 4 | AIN 6 | — | — | — | — | — | — | — | — |
| 5 | AIN 7 | — | — | — | — | — | — | — | — |
| 6 | AIN 8 | — | — | — | — | — | — | — | — |
| 7 | GP out 13 (H-BRIDGE 1) | — | — | — | — | — | — | — | — |
| 8 | GP out 14 (H-BRIDGE 1) | — | — | — | — | — | — | — | — |
| 9 | Engine gnd | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX3
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | GP out 15 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 10 | WBO2 sensor 2 VS | — | — | — | — | — | — | — | — |
| 11 | WBO2 sensor 2 COM/VREF | — | — | — | — | — | — | — | — |
| 12 | GP Out 8 (GND) / WBO2 Sensor 2 H- | — | — | — | — | — | — | — | — |
| 13 | WBO2 sensor 2 SHIELD | — | — | — | — | — | — | — | — |
| 14 | GP OUT 9 (12V) | — | — | — | — | — | — | — | — |
| 15 | GP OUT 10 (12V) | — | — | — | — | — | — | — | — |
| 16 | GP OUT 11 (12V) | — | — | — | — | — | — | — | — |
| 17 | GP OUT 12 (12V) | — | — | — | — | — | — | — | — |
| 18 | WBO2 sensor 2 RCAL | — | — | — | — | — | — | — | — |
| 19 | WBO2 sensor 2 IP | — | — | — | — | — | — | — | — |
| 2 | GP out 16 (H-BRIDGE 2) | — | — | — | — | — | — | — | — |
| 20 | 12V WBO2 sensor 2 (H+) | — | — | — | — | — | — | — | — |
| 21 | AIN 17 | — | — | — | — | — | — | — | — |
| 22 | AIN 18 | — | — | — | — | — | — | — | — |
| 23 | AIN 19 | — | — | — | — | — | — | — | — |
| 24 | AIN 20 | — | — | — | — | — | — | — | — |
| 25 | AIN 21 | — | — | — | — | — | — | — | — |
| 26 | AIN 22 | — | — | — | — | — | — | — | — |
| 27 | AIN 23 | — | — | — | — | — | — | — | — |
| 28 | AIN 24 | — | — | — | — | — | — | — | — |
| 29 | INJECTOR 7 | — | — | — | — | — | — | — | — |
| 3 | Ignition 7 | — | — | — | — | — | — | — | — |
| 30 | INJECTOR 8 | — | — | — | — | — | — | — | — |
| 31 | INJECTOR 9 | — | — | — | — | — | — | — | — |
| 32 | INJECTOR 10 | — | — | — | — | — | — | — | — |
| 33 | INJECTOR 11 | — | — | — | — | — | — | — | — |
| 34 | INJECTOR 12 | — | — | — | — | — | — | — | — |
| 4 | Ignition 8 | — | — | — | — | — | — | — | — |
| 5 | Ignition 9 | — | — | — | — | — | — | — | — |
| 6 | Ignition 10 | — | — | — | — | — | — | — | — |
| 7 | Ignition 11 | — | — | — | — | — | — | — | — |
| 8 | Ignition 12 | — | — | — | — | — | — | — | — |
| 9 | Engine gnd | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
MAXXECUGEN2R-MX4
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Digital/VR 5 SHIELD | — | — | — | — | — | — | — | — |
| 10 | EGT 1 + | — | — | — | — | — | — | — | — |
| 11 | EGT 2 + | — | — | — | — | — | — | — | — |
| 12 | EGT 3 + | — | — | — | — | — | — | — | — |
| 13 | EGT 4 + | — | — | — | — | — | — | — | — |
| 14 | EGT 5 + | — | — | — | — | — | — | — | — |
| 15 | EGT 6 + | — | — | — | — | — | — | — | — |
| 16 | EGT 7 + | — | — | — | — | — | — | — | — |
| 17 | EGT 8 + | — | — | — | — | — | — | — | — |
| 18 | EGT 1 - | — | — | — | — | — | — | — | — |
| 19 | EGT 2 - | — | — | — | — | — | — | — | — |
| 2 | Digital/VR 5 SIGNAL - | — | — | — | — | — | — | — | — |
| 20 | EGT 3 - | — | — | — | — | — | — | — | — |
| 21 | EGT 4 - | — | — | — | — | — | — | — | — |
| 22 | EGT 5 - | — | — | — | — | — | — | — | — |
| 23 | EGT 6 - | — | — | — | — | — | — | — | — |
| 24 | EGT 7 - | — | — | — | — | — | — | — | — |
| 25 | EGT 8 - | — | — | — | — | — | — | — | — |
| 26 | Digital/VR 8 SHIELD | — | — | — | — | — | — | — | — |
| 27 | Digital/VR 8 SIGNAL - | — | — | — | — | — | — | — | — |
| 28 | Digital/VR 8 SIGNAL + | — | — | — | — | — | — | — | — |
| 29 | CAN 2 L | — | — | — | — | — | — | — | — |
| 3 | Digital/VR 5 SIGNAL + | — | W22 | — | 0.5 | OEM-D-10 | — | — | — |
| 30 | CAN 2 H | — | — | — | — | — | — | — | — |
| 31 | INJECTOR 13 | — | — | — | — | — | — | — | — |
| 32 | INJECTOR 14 | — | — | — | — | — | — | — | — |
| 33 | INJECTOR 15 | — | — | — | — | — | — | — | — |
| 34 | INJECTOR 16 | — | — | — | — | — | — | — | — |
| 4 | Digital/VR 6 SHIELD | — | — | — | — | — | — | — | — |
| 5 | Digital/VR 6 SIGNAL - | — | — | — | — | — | — | — | — |
| 6 | Digital/VR 6 SIGNAL + | — | W23 | — | 0.5 | OEM-D-11 | — | — | — |
| 7 | Digital/VR 7 SHIELD | — | — | — | — | — | — | — | — |
| 8 | Digital/VR 7 SIGNAL - | — | — | — | — | — | — | — | — |
| 9 | Digital/VR 7 SIGNAL + | — | W24 | — | 0.5 | OEM-D-22 | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 11 | Injectors 2 & 6 (No.20) | — | W13 | — | 0.5 | MAXXECUGEN2R-MX1-32 | — | — | — |
| 12 | Injectors 1 & 4 (No.10) | — | W12 | — | 0.5 | MAXXECUGEN2R-MX1-31 | — | — | — |
| 25 | Injectors 3 & 5 (No.30) | — | W14 | — | 0.5 | MAXXECUGEN2R-MX1-33 | — | — | — |
| 26 | Power ground (E01/E02) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 11 | Throttle position sensor (VTA) | — | W16 | — | 0.5 | MAXXECUGEN2R-MX1-26 | — | — | — |
| 4 | Coolant temp (THW) | — | W17 | — | 0.5 | MAXXECUGEN2R-MX1-27 | — | — | — |
| 6 | Primary O2 sensor (OX1) | — | W19 | — | 0.5 | MAXXECUGEN2R-MX1-28 | — | — | — |
| 9 | Sensor ground (E1) | — | W9 | — | 0.5 | SP-0V-1 | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | A/C compressor request (A/C) | — | W22 | — | 0.5 | MAXXECUGEN2R-MX4-3 | — | — | — |
| 11 | Starter signal (STA) | — | W23 | — | 0.5 | MAXXECUGEN2R-MX4-6 | — | — | — |
| 12 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 13 | EFI main relay power (second feed) (+B1) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | Karman-vortex AFM signal (KS) | — | W18 | — | 0.5 | MAXXECUGEN2R-MX1-23 | — | — | — |
| 22 | Neutral start switch (NSW) | — | W24 | — | 0.5 | MAXXECUGEN2R-MX4-9 | — | — | — |
| 3 | Intake air temp (THA) | — | W20 | — | 0.5 | MAXXECUGEN2R-MX1-29 | — | — | — |
| 4 | EFI main relay control (M-REL) | — | W15 | — | 0.5 | MAXXECUGEN2R-MX1-5 | — | — | — |
| 5 | Knock sensor 1 (KNK1) | — | W11 | — | 0.5 | MAXXECUGEN2R-MX2-28 | — | — | — |
| 9 | Vehicle speed sensor (SPD) | — | W21 | — | 0.5 | MAXXECUGEN2R-MX1-24 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W9 | — | 0.5 | OEM-B-9 | — | — | — |
| 1 | — | — | W10 | — | 0.5 | MAXXECUGEN2R-MX1-14 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-D-12 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-D-13 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | MAXXECUGEN2R-MX1-25 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | MAXXECUGEN2R-MX2-25 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-A-26 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | MAXXECUGEN2R-MX1-9 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | MAXXECUGEN2R-MX2-9 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | MAXXECUGEN2R-MX3-9 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-11 | Injectors 2 & 6 (No.20) | injector_out | MAXXECUGEN2R-MX1-32 | INJECTOR 2 | injector_out | corroborated | |
| OEM-A-12 | Injectors 1 & 4 (No.10) | injector_out | MAXXECUGEN2R-MX1-31 | INJECTOR 1 | injector_out | corroborated | |
| OEM-A-25 | Injectors 3 & 5 (No.30) | injector_out | MAXXECUGEN2R-MX1-33 | INJECTOR 3 | injector_out | corroborated | |
| OEM-A-26 | Power ground (E01/E02) | ground | MAXXECUGEN2R-MX1-9 + MAXXECUGEN2R-MX2-9 + MAXXECUGEN2R-MX3-9 | Engine gnd + Engine gnd + Engine gnd | ground | corroborated | |
| OEM-B-11 | Throttle position sensor (VTA) | analog_in | MAXXECUGEN2R-MX1-26 | AIN 1 | analog_in | corroborated | |
| OEM-B-4 | Coolant temp (THW) | temp_in | MAXXECUGEN2R-MX1-27 | AIN 2 | analog_in | corroborated | |
| OEM-B-6 | Primary O2 sensor (OX1) | lambda_nb_in | MAXXECUGEN2R-MX1-28 | AIN 3 | analog_in | corroborated | |
| OEM-B-9 | Sensor ground (E1) | sensor_ground | MAXXECUGEN2R-MX1-14 | SENSOR GND | sensor_ground | corroborated | |
| OEM-D-10 | A/C compressor request (A/C) | digital_in | MAXXECUGEN2R-MX4-3 | Digital/VR 5 SIGNAL + | digital_in | single_source | |
| OEM-D-11 | Starter signal (STA) | digital_in | MAXXECUGEN2R-MX4-6 | Digital/VR 6 SIGNAL + | digital_in | single_source | |
| OEM-D-12 | EFI main relay power (+B) | power_in | MAXXECUGEN2R-MX1-25 + MAXXECUGEN2R-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | single_source | |
| OEM-D-13 | EFI main relay power (second feed) (+B1) | power_in | MAXXECUGEN2R-MX1-25 + MAXXECUGEN2R-MX2-25 | 12V supply 1 + 12V supply 2 | power_in | single_source | |
| OEM-D-2 | Karman-vortex AFM signal (KS) | digital_in | MAXXECUGEN2R-MX1-23 | Digital/VR 3 SIGNAL + | digital_in | single_source | |
| OEM-D-22 | Neutral start switch (NSW) | digital_in | MAXXECUGEN2R-MX4-9 | Digital/VR 7 SIGNAL + | digital_in | single_source | |
| OEM-D-3 | Intake air temp (THA) | temp_in | MAXXECUGEN2R-MX1-29 | AIN 4 | analog_in | single_source | |
| OEM-D-4 | EFI main relay control (M-REL) | low_side_out | MAXXECUGEN2R-MX1-5 | GP out 1 (GND) | low_side_out | single_source | |
| OEM-D-5 | Knock sensor 1 (KNK1) | knock_in | MAXXECUGEN2R-MX2-28 | KNOCK 1+ | knock_in | single_source | |
| OEM-D-9 | Vehicle speed sensor (SPD) | digital_in | MAXXECUGEN2R-MX1-24 | Digital/VR 4 SIGNAL + | digital_in | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-D-12 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-D-13 | SP-14V-1 | 0.85 | no route | EFI main relay power (second feed) (+B1) | — | |
| W3 | SP-14V-1 | MAXXECUGEN2R-MX1-25 | 0.85 | no route | 12V supply 1 | — | |
| W4 | SP-14V-1 | MAXXECUGEN2R-MX2-25 | 0.85 | no route | 12V supply 2 | — | |
| W5 | OEM-A-26 | SP-GND-1 | 0.85 | no route | Power ground (E01/E02) | — | |
| W6 | SP-GND-1 | MAXXECUGEN2R-MX1-9 | 0.85 | no route | Engine gnd | — | |
| W7 | SP-GND-1 | MAXXECUGEN2R-MX2-9 | 0.85 | no route | Engine gnd | — | |
| W8 | SP-GND-1 | MAXXECUGEN2R-MX3-9 | 0.85 | no route | Engine gnd | — | |
| W9 | OEM-B-9 | SP-0V-1 | 0.5 | no route | Sensor ground (E1) | — | |
| W10 | SP-0V-1 | MAXXECUGEN2R-MX1-14 | 0.5 | no route | SENSOR GND | — | |
| W11 | OEM-D-5 | MAXXECUGEN2R-MX2-28 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W12 | OEM-A-12 | MAXXECUGEN2R-MX1-31 | 0.5 | no route | Injectors 1 & 4 (No.10) | — | |
| W13 | OEM-A-11 | MAXXECUGEN2R-MX1-32 | 0.5 | no route | Injectors 2 & 6 (No.20) | — | |
| W14 | OEM-A-25 | MAXXECUGEN2R-MX1-33 | 0.5 | no route | Injectors 3 & 5 (No.30) | — | |
| W15 | OEM-D-4 | MAXXECUGEN2R-MX1-5 | 0.5 | no route | EFI main relay control (M-REL) | — | |
| W16 | OEM-B-11 | MAXXECUGEN2R-MX1-26 | 0.5 | no route | Throttle position sensor (VTA) | — | |
| W17 | OEM-B-4 | MAXXECUGEN2R-MX1-27 | 0.5 | no route | Coolant temp (THW) | — | |
| W18 | OEM-D-2 | MAXXECUGEN2R-MX1-23 | 0.5 | no route | Karman-vortex AFM signal (KS) | — | |
| W19 | OEM-B-6 | MAXXECUGEN2R-MX1-28 | 0.5 | no route | Primary O2 sensor (OX1) | — | |
| W20 | OEM-D-3 | MAXXECUGEN2R-MX1-29 | 0.5 | no route | Intake air temp (THA) | — | |
| W21 | OEM-D-9 | MAXXECUGEN2R-MX1-24 | 0.5 | no route | Vehicle speed sensor (SPD) | — | |
| W22 | OEM-D-10 | MAXXECUGEN2R-MX4-3 | 0.5 | no route | A/C compressor request (A/C) | — | |
| W23 | OEM-D-11 | MAXXECUGEN2R-MX4-6 | 0.5 | no route | Starter signal (STA) | — | |
| W24 | OEM-D-22 | MAXXECUGEN2R-MX4-9 | 0.5 | no route | Neutral start switch (NSW) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (3)
| Severity | Code | Subject | Message |
|---|---|---|---|
| warn | NO_FUEL_PUMP | fuel pump | This engine harness has no fuel-pump control path: no fuel-pump relay output is wired to the new ECU. If the stock car switches the pump outside the ECU (an airflow-meter contact or a separate module), the standalone must drive the pump relay itself — see the install notes for this car. |
| info | NET_FAMILY | OEM-B-4 ↔ MAXXECUGEN2R-MX1-27 | OEM-B-4 "Coolant temp (THW)" [temp_in] is wired to MAXXECUGEN2R-MX1-27 "AIN 2" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-D-3 ↔ MAXXECUGEN2R-MX1-29 | OEM-D-3 "Intake air temp (THA)" [temp_in] is wired to MAXXECUGEN2R-MX1-29 "AIN 4" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for Toyota 7M-GTE not found in the ECU's docs (2026-10-23 re-check: no 7M-GE/7M-GTE mode in the MTune trigger list (no Nippondenso 24+2 CAS decoder; only generic multitooth modes).) Auto-mapped by auto_map() from the library pin data on 2026-10-23. Review every wire against both manuals before building. Open items: - Fuel-pump control: MaxxECU MaxxECU GEN2 RACE needs to drive the fuel pump, but the stock ECU has no fuel-pump output (an airflow-meter contact or a separate module runs it) and the ECU has no fuel-pump output pin to wire — add a fuel-pump relay on a spare low-side output, see the install notes for this car. Not wired: - MAXXECUGEN2R-MX2 24: 12V supply 3: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 5 | oem_wiring_diagram | Toyota Supra A70 (MA70) 1990 EWD — TCCS (7M-GTE) System Circuit | — | — | — | — |
| 4 | vendor_doc | MaxxECU GEN2 pinout (RACE MX1–MX4 / TRACK MX1–MX3) | http://www.maxxecu.com/webhelp/wirings-maxxecu_gen2_pinout.html | archive | 2026-10-05 | f689b8b6b08f |
| 4 | vendor_doc | Toyota 7M-GTE EFI manual — "Terminals of ECU" (complete terminal list, no pin numbers) | http://shoarmateam.nl/upload/Toyota-Other/Cressida/MX83/efi%20system%20+%20WIRING/toyota-7m-manual-efi-fi%5b1%5d.pdf | — | — | — |
| 2 | forum | AllPinouts: 1989–1992 Toyota Supra ECU | https://allpinouts.org/pinouts/connectors/car/1989-1992-toyota-supra-ecu/ | — | — | — |