Toyota 86 (ZN6, FA20) → Emtron Shadow 8 (auto)
Toyota 86 (ZN6, FA20) — Emtron — Shadow 8
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-09
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 1: read the Findings page before cutting any wire |
| Size of the job | 78 wires · 11 connectors · 3 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | SHADOW8-A-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | SHADOW8-B-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-A33-2 | SHADOW8-B-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-A33-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-A34-1 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A34-2 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A34-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-A36-3 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-A36-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | SHADOW8-A-34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | SHADOW8-A-9 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-A33-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-A34-27 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A35-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-A35-30 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-A36-29 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | SP-0V-1 | SHADOW8-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | SP-0V-1 | SHADOW8-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-A34-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-A35-21 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-A35-22 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-A36-19 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-5V1-1 | SHADOW8-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-A34-16 | SHADOW8-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-A34-14 | SHADOW8-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-A34-28 | SHADOW8-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-A34-17 | SHADOW8-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-A36-21 | SHADOW8-B-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-A36-10 | SHADOW8-B-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-A36-31 | SHADOW8-B-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-A36-8 | SHADOW8-B-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-A36-12 | SHADOW8-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-A36-14 | SHADOW8-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-A36-22 | SHADOW8-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-A36-25 | SHADOW8-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A36-24 | SHADOW8-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A36-32 | SHADOW8-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-A36-13 | SHADOW8-B-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-A36-23 | SHADOW8-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-A33-28 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-A34-29 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A34-30 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A34-35 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | SP-SHD-1 | SHADOW8-A-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A33-27 | SHADOW8-B-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A36-1 | SHADOW8-B-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A36-2 | SHADOW8-B-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A35-13 | SHADOW8-B-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-A35-12 | SHADOW8-B-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-A35-11 | SHADOW8-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-A33-20 | SHADOW8-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-A35-17 | SHADOW8-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-A35-35 | SHADOW8-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-A35-5 | SHADOW8-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-A35-7 | SHADOW8-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-A34-5 | SHADOW8-B-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A36-6 | SHADOW8-B-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A33-22 | SHADOW8-A-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-A34-20 | SHADOW8-A-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-A35-31 | SHADOW8-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-A36-28 | SHADOW8-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-A35-23 | SHADOW8-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-A36-18 | SHADOW8-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-A34-21 | SHADOW8-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-A36-30 | SHADOW8-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-A33-12 | SHADOW8-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-A36-20 | SHADOW8-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-A33-14 | SHADOW8-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-A33-15 | SHADOW8-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-A33-16 | SHADOW8-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-A33-17 | SHADOW8-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-A33-3 | SHADOW8-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-A33-7 | SHADOW8-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-A35-26 | SHADOW8-B-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-A33-19 | SHADOW8-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-A33-18 | SHADOW8-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | SHADOW8-A-1 | SHADOW8-A-34 | open (OL) | +12 V supply must not touch power ground | |
| 2 | SHADOW8-A-1 | SHADOW8-A-4 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | SHADOW8-B-1 | SHADOW8-A-34 | open (OL) | +12 V supply must not touch power ground | |
| 4 | SHADOW8-B-1 | SHADOW8-A-4 | open (OL) | +12 V supply must not touch sensor ground | |
| 5 | SHADOW8-A-1 | SHADOW8-A-3 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 6 | SHADOW8-A-34 | SHADOW8-A-3 | open (OL) | power ground must not touch 5 V sensor reference | |
| 7 | SHADOW8-A-4 | SHADOW8-A-3 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 8 | SHADOW8-B-1 | SHADOW8-A-3 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-A33
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU power (+B2, main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 12 | Intake air temperature (THA, in MAF) | — | W68 | — | 0.5 | SHADOW8-A-21 | — | — | — |
| 14 | Starter signal (STSW2) | — | W70 | — | 0.5 | SHADOW8-A-26 | — | — | — |
| 15 | Clutch switch (CLSW) | — | W71 | — | 0.5 | SHADOW8-A-27 | — | — | — |
| 16 | Neutral switch (NSW) | — | W72 | — | 0.5 | SHADOW8-A-28 | — | — | — |
| 17 | Starter signal (STSW2) | — | W73 | — | 0.5 | SHADOW8-A-29 | — | — | — |
| 18 | CAN low (CANL) | — | W78 | — | 0.5 | SHADOW8-A-23 | — | — | — |
| 19 | CAN high (CANH) | — | W77 | — | 0.5 | SHADOW8-A-15 | — | — | — |
| 2 | Battery constant (BATT, memory) | — | W5 | — | 0.85 | SHADOW8-B-1 | — | — | — |
| 20 | Blower relay (HB) | — | W53 | — | 0.5 | SHADOW8-B-13 | — | — | — |
| 22 | Mass air flow (VG) | — | W60 | — | 0.5 | SHADOW8-A-10 | — | — | — |
| 27 | Ignition switch sense (IGSW, IG2 relay) | — | W47 | — | 0.5 | SHADOW8-B-21 | — | — | — |
| 28 | Shield ground (SLE2) | — | W42 | — | 0.5 | SP-SHD-1 | — | — | — |
| 29 | MAF sensor ground (E2G) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Stop light switch (ST1-) | — | W74 | — | 0.5 | SHADOW8-A-30 | — | — | — |
| 4 | Power ground (EC) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Stop light switch (STP) | — | W75 | — | 0.5 | SHADOW8-A-31 | — | — | — |
| 8 | A/C pressure sensor (ACP) | — | — | — | — | — | — | — | — |
OEM-A34
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Power ground (E03) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | DI injector confirmation (IJF1) | — | — | — | — | — | — | — | — |
| 13 | High-pressure fuel pump spill valve (FPF) | — | — | — | — | — | — | — | — |
| 14 | VVT cam sensor exhaust bank 1 (EV1+) | — | W27 | — | 0.5 | SHADOW8-A-6 | — | — | — |
| 15 | VVT cam sensor intake bank 2 (VV2+) | — | — | — | — | — | — | — | — |
| 16 | Crank position (NE+) | — | W26 | — | 0.5 | SHADOW8-A-5 | — | — | — |
| 17 | Knock sensor 2 (KNK2) | — | W29 | — | 0.5 | SHADOW8-A-24 | — | — | — |
| 18 | A/F ratio sensor (A1A-) | — | — | — | — | — | — | — | — |
| 19 | A/F ratio sensor (A1A+) | — | — | — | — | — | — | — | — |
| 2 | Power ground (E04) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Manifold absolute pressure (PIM) | — | W61 | — | 0.5 | SHADOW8-A-11 | — | — | — |
| 21 | Heated oxygen sensor (OX1B, rear) | — | W66 | — | 0.5 | SHADOW8-A-19 | — | — | — |
| 25 | VVT cam sensor exhaust bank 2 (EV2+) | — | — | — | — | — | — | — | — |
| 26 | VVT cam sensor intake bank 1 (VV1+) | — | — | — | — | — | — | — | — |
| 27 | Crank position return (NE-) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 28 | Knock sensor 1 (KNK1) | — | W28 | — | 0.5 | SHADOW8-A-16 | — | — | — |
| 29 | Shield ground (EKNK) | — | W43 | — | 0.5 | SP-SHD-1 | — | — | — |
| 3 | Power ground (E05) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Shield ground (SLE1) | — | W44 | — | 0.5 | SP-SHD-1 | — | — | — |
| 31 | DI injector confirmation (IJF2) | — | — | — | — | — | — | — | — |
| 32 | High-pressure fuel pump spill valve (FPD) | — | — | — | — | — | — | — | — |
| 34 | OCV power source (VCV, 5V) | — | W21 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Shield ground (SLE3) | — | W45 | — | 0.5 | SP-SHD-1 | — | — | — |
| 5 | A/F ratio sensor heater (HA1A) | — | W58 | — | 0.5 | SHADOW8-B-24 | — | — | — |
| 6 | ECU power (+B, main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Fuel pressure sensor (PR) | — | — | — | — | — | — | — | — |
OEM-A35
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Canister vent valve (VPMP) | — | — | — | — | — | — | — | — |
| 10 | Fuel pump control monitor (DI) | — | — | — | — | — | — | — | — |
| 11 | Cooling fan relay 3 (FAN1) | — | W52 | — | 0.5 | SHADOW8-B-12 | — | — | — |
| 12 | Cooling fan relay 2 (FAN2) | — | W51 | — | 0.5 | SHADOW8-B-11 | — | — | — |
| 13 | EFI main relay 1 (SSHUT) | — | W50 | — | 0.5 | SHADOW8-B-10 | — | — | — |
| 15 | Tachometer output (TACH) | — | — | — | — | — | — | — | — |
| 17 | ETCS relay (MCR) | — | W54 | — | 0.5 | SHADOW8-B-14 | — | — | — |
| 19 | Fuel pump control (FPC) | — | — | — | — | — | — | — | — |
| 20 | Canister pressure sensor (PPMP) | — | — | — | — | — | — | — | — |
| 21 | Accelerator pedal 5V supply (VCPA) | — | W22 | — | 0.5 | SP-5V1-1 | — | — | — |
| 22 | Accelerator pedal 5V supply (VCP2) | — | W23 | — | 0.5 | SP-5V1-1 | — | — | — |
| 23 | Accelerator pedal position (VPA) | — | W64 | — | 0.5 | SHADOW8-A-14 | — | — | — |
| 26 | Starter signal (STA) | — | W76 | — | 0.5 | SHADOW8-B-18 | — | — | — |
| 29 | Accelerator pedal ground (EPA) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Accelerator pedal ground (EPA2) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 31 | Accelerator pedal position 2 (VPA2) | — | W62 | — | 0.5 | SHADOW8-A-12 | — | — | — |
| 35 | A/C clutch relay (AC) | — | W55 | — | 0.5 | SHADOW8-B-15 | — | — | — |
| 5 | Injector relay (IREL) | — | W56 | — | 0.5 | SHADOW8-B-16 | — | — | — |
| 7 | ETCS relay (+BM) | — | W57 | — | 0.5 | SHADOW8-B-17 | — | — | — |
| 8 | Leak detection pump (MPMP) | — | — | — | — | — | — | — | — |
OEM-A36
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Throttle actuator motor - (M-) | — | W48 | — | 0.5 | SHADOW8-B-22 | — | — | — |
| 10 | Ignition coil 2 (IGT2) | — | W31 | — | 0.5 | SHADOW8-B-28 | — | — | — |
| 11 | Purge valve (PRG) | — | — | — | — | — | — | — | — |
| 12 | Injector 1 port (#10) | — | W34 | — | 0.5 | SHADOW8-B-2 | — | — | — |
| 13 | Injector 4 port (#40) | — | W40 | — | 0.5 | SHADOW8-B-8 | — | — | — |
| 14 | Injector 1 direct (#1) | — | W35 | — | 0.5 | SHADOW8-B-3 | — | — | — |
| 16 | OCV intake bank 2 (OC2) | — | — | — | — | — | — | — | — |
| 17 | OCV intake bank 1 (OC1) | — | — | — | — | — | — | — | — |
| 18 | Throttle position (VTA1) | — | W65 | — | 0.5 | SHADOW8-A-18 | — | — | — |
| 19 | Sensor 5V supply (VC) | — | W24 | — | 0.5 | SP-5V1-1 | — | — | — |
| 2 | Throttle actuator motor + (M+) | — | W49 | — | 0.5 | SHADOW8-B-23 | — | — | — |
| 20 | Oil temperature (OT) | — | W69 | — | 0.5 | SHADOW8-A-22 | — | — | — |
| 21 | Ignition coil 1 (IGT1) | — | W30 | — | 0.5 | SHADOW8-B-27 | — | — | — |
| 22 | Injector 2 port (#20) | — | W36 | — | 0.5 | SHADOW8-B-4 | — | — | — |
| 23 | Injector 4 direct (#4) | — | W41 | — | 0.5 | SHADOW8-B-9 | — | — | — |
| 24 | Injector 3 direct (#3) | — | W38 | — | 0.5 | SHADOW8-B-6 | — | — | — |
| 25 | Injector 2 direct (#2) | — | W37 | — | 0.5 | SHADOW8-B-5 | — | — | — |
| 28 | Throttle position 2 (VTA2) | — | W63 | — | 0.5 | SHADOW8-A-13 | — | — | — |
| 29 | Sensor ground (E1) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Power ground (E02) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 30 | Engine coolant temperature (THW) | — | W67 | — | 0.5 | SHADOW8-A-20 | — | — | — |
| 31 | Ignition coil 3 (IGT3) | — | W32 | — | 0.5 | SHADOW8-B-29 | — | — | — |
| 32 | Injector 3 port (#30) | — | W39 | — | 0.5 | SHADOW8-B-7 | — | — | — |
| 4 | Power ground (E01) | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | OCV exhaust bank 2 (OE2) | — | — | — | — | — | — | — | — |
| 6 | Heated oxygen sensor heater (HT1B) | — | W59 | — | 0.5 | SHADOW8-B-25 | — | — | — |
| 7 | OCV exhaust bank 1 (OE1) | — | — | — | — | — | — | — | — |
| 8 | Ignition coil 4 (IGT4) | — | W33 | — | 0.5 | SHADOW8-B-30 | — | — | — |
SHADOW8-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECU supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | 8.0V sensor supply | — | — | — | — | — | — | — | — |
| 3 | 5.0V sensor supply | — | W25 | — | 0.5 | SP-5V1-1 | — | — | — |
| 4 | 0V analog reference | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Crank position sensor | — | W26 | — | 0.5 | OEM-A34-16 | — | — | — |
| 6 | Sync position sensor | — | W27 | — | 0.5 | OEM-A34-14 | — | — | — |
| 7 | Trigger ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Shield | — | W46 | — | 0.5 | SP-SHD-1 | — | — | — |
| 9 | Ground 1 | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 10 | Analog voltage 1 | — | W60 | — | 0.5 | OEM-A33-22 | — | — | — |
| 11 | Analog voltage 2 | — | W61 | — | 0.5 | OEM-A34-20 | — | — | — |
| 12 | Analog voltage 3 | — | W62 | — | 0.5 | OEM-A35-31 | — | — | — |
| 13 | Analog voltage 4 | — | W63 | — | 0.5 | OEM-A36-28 | — | — | — |
| 14 | Analog voltage 5 | — | W64 | — | 0.5 | OEM-A35-23 | — | — | — |
| 15 | CAN bus 1 high | — | W77 | — | 0.5 | OEM-A33-19 | — | — | — |
| 16 | Knock 1 + | — | W28 | — | 0.5 | OEM-A34-28 | — | — | — |
| 17 | Knock 1 − | — | — | — | — | — | — | — | — |
| 18 | Analog voltage 6 | — | W65 | — | 0.5 | OEM-A36-18 | — | — | — |
| 19 | Analog voltage 7 (switchable 1k pull-up) | — | W66 | — | 0.5 | OEM-A34-21 | — | — | — |
| 20 | Analog voltage 8 (switchable 1k pull-up) | — | W67 | — | 0.5 | OEM-A36-30 | — | — | — |
| 21 | Analog voltage 9 (switchable 1k pull-up) | — | W68 | — | 0.5 | OEM-A33-12 | — | — | — |
| 22 | Analog voltage 10 (switchable 1k pull-up) | — | W69 | — | 0.5 | OEM-A36-20 | — | — | — |
| 23 | CAN bus 1 low | — | W78 | — | 0.5 | OEM-A33-18 | — | — | — |
| 24 | Knock 2 + | — | W29 | — | 0.5 | OEM-A34-17 | — | — | — |
| 25 | Knock 2 − | — | — | — | — | — | — | — | — |
| 26 | Digital input 1 | — | W70 | — | 0.5 | OEM-A33-14 | — | — | — |
| 27 | Digital input 2 | — | W71 | — | 0.5 | OEM-A33-15 | — | — | — |
| 28 | Digital input 3 | — | W72 | — | 0.5 | OEM-A33-16 | — | — | — |
| 29 | Digital input 4 | — | W73 | — | 0.5 | OEM-A33-17 | — | — | — |
| 30 | Digital input 5 | — | W74 | — | 0.5 | OEM-A33-3 | — | — | — |
| 31 | Digital input 6 | — | W75 | — | 0.5 | OEM-A33-7 | — | — | — |
| 32 | CAN bus 2 high | — | — | — | — | — | — | — | — |
| 33 | CAN bus 2 low | — | — | — | — | — | — | — | — |
| 34 | Ground 2 | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
SHADOW8-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (HOT) supply | — | W5 | — | 0.85 | OEM-A33-2 | — | — | — |
| 2 | Injector cylinder 1 | — | W34 | — | 0.5 | OEM-A36-12 | — | — | — |
| 3 | Injector cylinder 2 | — | W35 | — | 0.5 | OEM-A36-14 | — | — | — |
| 4 | Injector cylinder 3 | — | W36 | — | 0.5 | OEM-A36-22 | — | — | — |
| 5 | Injector cylinder 4 | — | W37 | — | 0.5 | OEM-A36-25 | — | — | — |
| 6 | Injector cylinder 5 | — | W38 | — | 0.5 | OEM-A36-24 | — | — | — |
| 7 | Injector cylinder 6 | — | W39 | — | 0.5 | OEM-A36-32 | — | — | — |
| 8 | Injector cylinder 7 | — | W40 | — | 0.5 | OEM-A36-13 | — | — | — |
| 9 | Injector cylinder 8 | — | W41 | — | 0.5 | OEM-A36-23 | — | — | — |
| 10 | Aux output 1 | — | W50 | — | 0.5 | OEM-A35-13 | — | — | — |
| 11 | Aux output 2 | — | W51 | — | 0.5 | OEM-A35-12 | — | — | — |
| 12 | Aux output 3 | — | W52 | — | 0.5 | OEM-A35-11 | — | — | — |
| 13 | Aux output 4 | — | W53 | — | 0.5 | OEM-A33-20 | — | — | — |
| 14 | Aux output 5 | — | W54 | — | 0.5 | OEM-A35-17 | — | — | — |
| 15 | Aux output 6 | — | W55 | — | 0.5 | OEM-A35-35 | — | — | — |
| 16 | Aux output 7 | — | W56 | — | 0.5 | OEM-A35-5 | — | — | — |
| 17 | Aux output 8 | — | W57 | — | 0.5 | OEM-A35-7 | — | — | — |
| 18 | Digital input 7 | — | W76 | — | 0.5 | OEM-A35-26 | — | — | — |
| 19 | Digital input 8 | — | — | — | — | — | — | — | — |
| 20 | Digital input 9 | — | — | — | — | — | — | — | — |
| 21 | Digital input 10 / ignition switch | — | W47 | — | 0.5 | OEM-A33-27 | — | — | — |
| 22 | Aux output 9 | — | W48 | — | 0.5 | OEM-A36-1 | — | — | — |
| 23 | Aux output 10 | — | W49 | — | 0.5 | OEM-A36-2 | — | — | — |
| 24 | Aux output 11 | — | W58 | — | 0.5 | OEM-A34-5 | — | — | — |
| 25 | Aux output 12 | — | W59 | — | 0.5 | OEM-A36-6 | — | — | — |
| 26 | Aux 9–12 power supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | Ignition TTL cylinder 1 | — | W30 | — | 0.5 | OEM-A36-21 | — | — | — |
| 28 | Ignition TTL cylinder 2 | — | W31 | — | 0.5 | OEM-A36-10 | — | — | — |
| 29 | Ignition TTL cylinder 3 | — | W32 | — | 0.5 | OEM-A36-31 | — | — | — |
| 30 | Ignition TTL cylinder 4 | — | W33 | — | 0.5 | OEM-A36-8 | — | — | — |
| 31 | Ignition TTL cylinder 5 | — | — | — | — | — | — | — | — |
| 32 | Ignition TTL cylinder 6 | — | — | — | — | — | — | — | — |
| 33 | Ignition TTL cylinder 7 | — | — | — | — | — | — | — | — |
| 34 | Ignition TTL cylinder 8 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W20 | — | 0.5 | SHADOW8-A-7 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-A33-29 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-A34-27 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-A35-29 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-A35-30 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-A36-29 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | SHADOW8-A-4 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A33-1 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-A34-6 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | SHADOW8-A-1 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | SHADOW8-B-26 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W21 | — | 0.5 | OEM-A34-34 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-A35-21 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-A35-22 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-A36-19 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | SHADOW8-A-3 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W6 | — | 0.85 | OEM-A33-4 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-A34-1 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-A34-2 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-A34-3 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-A36-3 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-A36-4 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | SHADOW8-A-34 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | SHADOW8-A-9 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W42 | — | 0.5 | OEM-A33-28 | — | — | — |
| 1 | — | — | W43 | — | 0.5 | OEM-A34-29 | — | — | — |
| 1 | — | — | W44 | — | 0.5 | OEM-A34-30 | — | — | — |
| 1 | — | — | W45 | — | 0.5 | OEM-A34-35 | — | — | — |
| 1 | — | — | W46 | — | 0.5 | SHADOW8-A-8 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A33-1 | ECU power (+B2, main relay) | power_in | SHADOW8-A-1 + SHADOW8-B-26 | ECU supply + Aux 9–12 power supply | power_in | single_source | |
| OEM-A33-12 | Intake air temperature (THA, in MAF) | temp_in | SHADOW8-A-21 | Analog voltage 9 (switchable 1k pull-up) | analog_in | single_source | |
| OEM-A33-14 | Starter signal (STSW2) | digital_in | SHADOW8-A-26 | Digital input 1 | digital_in | single_source | |
| OEM-A33-15 | Clutch switch (CLSW) | digital_in | SHADOW8-A-27 | Digital input 2 | digital_in | single_source | |
| OEM-A33-16 | Neutral switch (NSW) | digital_in | SHADOW8-A-28 | Digital input 3 | digital_in | single_source | |
| OEM-A33-17 | Starter signal (STSW2) | digital_in | SHADOW8-A-29 | Digital input 4 | digital_in | single_source | |
| OEM-A33-18 | CAN low (CANL) | can_l | SHADOW8-A-23 | CAN bus 1 low | can_l | single_source | |
| OEM-A33-19 | CAN high (CANH) | can_h | SHADOW8-A-15 | CAN bus 1 high | can_h | single_source | |
| OEM-A33-2 | Battery constant (BATT, memory) | power_in | SHADOW8-B-1 | Battery constant (HOT) supply | power_in | single_source | |
| OEM-A33-20 | Blower relay (HB) | low_side_out | SHADOW8-B-13 | Aux output 4 | low_side_out | single_source | |
| OEM-A33-22 | Mass air flow (VG) | analog_in | SHADOW8-A-10 | Analog voltage 1 | analog_in | single_source | |
| OEM-A33-27 | Ignition switch sense (IGSW, IG2 relay) | digital_in | SHADOW8-B-21 | Digital input 10 / ignition switch | digital_in | single_source | |
| OEM-A33-28 | Shield ground (SLE2) | shield | SHADOW8-A-8 | Shield | shield | single_source | |
| OEM-A33-29 | MAF sensor ground (E2G) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-A33-3 | Stop light switch (ST1-) | digital_in | SHADOW8-A-30 | Digital input 5 | digital_in | single_source | |
| OEM-A33-4 | Power ground (EC) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A33-7 | Stop light switch (STP) | digital_in | SHADOW8-A-31 | Digital input 6 | digital_in | single_source | |
| OEM-A33-8 | A/C pressure sensor (ACP) | analog_in | — | — | — | single_source | |
| OEM-A34-1 | Power ground (E03) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A34-11 | DI injector confirmation (IJF1) | analog_in | — | — | — | single_source | |
| OEM-A34-13 | High-pressure fuel pump spill valve (FPF) | low_side_out | — | — | — | single_source | |
| OEM-A34-14 | VVT cam sensor exhaust bank 1 (EV1+) | trigger_in | SHADOW8-A-6 | Sync position sensor | trigger_in | single_source | |
| OEM-A34-15 | VVT cam sensor intake bank 2 (VV2+) | trigger_in | — | — | — | single_source | |
| OEM-A34-16 | Crank position (NE+) | trigger_in | SHADOW8-A-5 | Crank position sensor | trigger_in | single_source | |
| OEM-A34-17 | Knock sensor 2 (KNK2) | knock_in | SHADOW8-A-24 | Knock 2 + | knock_in | single_source | |
| OEM-A34-18 | A/F ratio sensor (A1A-) | — | — | — | — | single_source | |
| OEM-A34-19 | A/F ratio sensor (A1A+) | — | — | — | — | single_source | |
| OEM-A34-2 | Power ground (E04) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A34-20 | Manifold absolute pressure (PIM) | analog_in | SHADOW8-A-11 | Analog voltage 2 | analog_in | single_source | |
| OEM-A34-21 | Heated oxygen sensor (OX1B, rear) | lambda_nb_in | SHADOW8-A-19 | Analog voltage 7 (switchable 1k pull-up) | analog_in | single_source | |
| OEM-A34-25 | VVT cam sensor exhaust bank 2 (EV2+) | trigger_in | — | — | — | single_source | |
| OEM-A34-26 | VVT cam sensor intake bank 1 (VV1+) | trigger_in | — | — | — | single_source | |
| OEM-A34-27 | Crank position return (NE-) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-A34-28 | Knock sensor 1 (KNK1) | knock_in | SHADOW8-A-16 | Knock 1 + | knock_in | single_source | |
| OEM-A34-29 | Shield ground (EKNK) | shield | SHADOW8-A-8 | Shield | shield | single_source | |
| OEM-A34-3 | Power ground (E05) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A34-30 | Shield ground (SLE1) | shield | SHADOW8-A-8 | Shield | shield | single_source | |
| OEM-A34-31 | DI injector confirmation (IJF2) | analog_in | — | — | — | single_source | |
| OEM-A34-32 | High-pressure fuel pump spill valve (FPD) | low_side_out | — | — | — | single_source | |
| OEM-A34-34 | OCV power source (VCV, 5V) | vref | SHADOW8-A-3 | 5.0V sensor supply | vref | single_source | |
| OEM-A34-35 | Shield ground (SLE3) | shield | SHADOW8-A-8 | Shield | shield | single_source | |
| OEM-A34-5 | A/F ratio sensor heater (HA1A) | low_side_out | SHADOW8-B-24 | Aux output 11 | hbridge_out | single_source | |
| OEM-A34-6 | ECU power (+B, main relay) | power_in | SHADOW8-A-1 + SHADOW8-B-26 | ECU supply + Aux 9–12 power supply | power_in | single_source | |
| OEM-A34-9 | Fuel pressure sensor (PR) | analog_in | — | — | — | single_source | |
| OEM-A35-1 | Canister vent valve (VPMP) | low_side_out | — | — | — | single_source | |
| OEM-A35-10 | Fuel pump control monitor (DI) | analog_in | — | — | — | single_source | |
| OEM-A35-11 | Cooling fan relay 3 (FAN1) | low_side_out | SHADOW8-B-12 | Aux output 3 | low_side_out | single_source | |
| OEM-A35-12 | Cooling fan relay 2 (FAN2) | low_side_out | SHADOW8-B-11 | Aux output 2 | low_side_out | single_source | |
| OEM-A35-13 | EFI main relay 1 (SSHUT) | low_side_out | SHADOW8-B-10 | Aux output 1 | low_side_out | single_source | |
| OEM-A35-15 | Tachometer output (TACH) | tacho_out | — | — | — | single_source | |
| OEM-A35-17 | ETCS relay (MCR) | low_side_out | SHADOW8-B-14 | Aux output 5 | switch_out | single_source | |
| OEM-A35-19 | Fuel pump control (FPC) | low_side_out | — | — | — | single_source | |
| OEM-A35-20 | Canister pressure sensor (PPMP) | analog_in | — | — | — | single_source | |
| OEM-A35-21 | Accelerator pedal 5V supply (VCPA) | vref | SHADOW8-A-3 | 5.0V sensor supply | vref | single_source | |
| OEM-A35-22 | Accelerator pedal 5V supply (VCP2) | vref | SHADOW8-A-3 | 5.0V sensor supply | vref | single_source | |
| OEM-A35-23 | Accelerator pedal position (VPA) | analog_in | SHADOW8-A-14 | Analog voltage 5 | analog_in | single_source | |
| OEM-A35-26 | Starter signal (STA) | digital_in | SHADOW8-B-18 | Digital input 7 | digital_in | single_source | |
| OEM-A35-29 | Accelerator pedal ground (EPA) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-A35-30 | Accelerator pedal ground (EPA2) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-A35-31 | Accelerator pedal position 2 (VPA2) | analog_in | SHADOW8-A-12 | Analog voltage 3 | analog_in | single_source | |
| OEM-A35-35 | A/C clutch relay (AC) | low_side_out | SHADOW8-B-15 | Aux output 6 | switch_out | single_source | |
| OEM-A35-5 | Injector relay (IREL) | low_side_out | SHADOW8-B-16 | Aux output 7 | switch_out | single_source | |
| OEM-A35-7 | ETCS relay (+BM) | low_side_out | SHADOW8-B-17 | Aux output 8 | switch_out | single_source | |
| OEM-A35-8 | Leak detection pump (MPMP) | low_side_out | — | — | — | single_source | |
| OEM-A36-1 | Throttle actuator motor - (M-) | hbridge_out | SHADOW8-B-22 | Aux output 9 | hbridge_out | single_source | |
| OEM-A36-10 | Ignition coil 2 (IGT2) | ignition_out | SHADOW8-B-28 | Ignition TTL cylinder 2 | ignition_out | single_source | |
| OEM-A36-11 | Purge valve (PRG) | low_side_out | — | — | — | single_source | |
| OEM-A36-12 | Injector 1 port (#10) | injector_out | SHADOW8-B-2 | Injector cylinder 1 | injector_out | single_source | |
| OEM-A36-13 | Injector 4 port (#40) | injector_out | SHADOW8-B-8 | Injector cylinder 7 | injector_out | single_source | |
| OEM-A36-14 | Injector 1 direct (#1) | injector_out | SHADOW8-B-3 | Injector cylinder 2 | injector_out | single_source | |
| OEM-A36-16 | OCV intake bank 2 (OC2) | low_side_out | — | — | — | single_source | |
| OEM-A36-17 | OCV intake bank 1 (OC1) | low_side_out | — | — | — | single_source | |
| OEM-A36-18 | Throttle position (VTA1) | analog_in | SHADOW8-A-18 | Analog voltage 6 | analog_in | single_source | |
| OEM-A36-19 | Sensor 5V supply (VC) | vref | SHADOW8-A-3 | 5.0V sensor supply | vref | single_source | |
| OEM-A36-2 | Throttle actuator motor + (M+) | hbridge_out | SHADOW8-B-23 | Aux output 10 | hbridge_out | single_source | |
| OEM-A36-20 | Oil temperature (OT) | temp_in | SHADOW8-A-22 | Analog voltage 10 (switchable 1k pull-up) | analog_in | single_source | |
| OEM-A36-21 | Ignition coil 1 (IGT1) | ignition_out | SHADOW8-B-27 | Ignition TTL cylinder 1 | ignition_out | single_source | |
| OEM-A36-22 | Injector 2 port (#20) | injector_out | SHADOW8-B-4 | Injector cylinder 3 | injector_out | single_source | |
| OEM-A36-23 | Injector 4 direct (#4) | injector_out | SHADOW8-B-9 | Injector cylinder 8 | injector_out | single_source | |
| OEM-A36-24 | Injector 3 direct (#3) | injector_out | SHADOW8-B-6 | Injector cylinder 5 | injector_out | single_source | |
| OEM-A36-25 | Injector 2 direct (#2) | injector_out | SHADOW8-B-5 | Injector cylinder 4 | injector_out | single_source | |
| OEM-A36-28 | Throttle position 2 (VTA2) | analog_in | SHADOW8-A-13 | Analog voltage 4 | analog_in | single_source | |
| OEM-A36-29 | Sensor ground (E1) | sensor_ground | SHADOW8-A-4 + SHADOW8-A-7 | 0V analog reference + Trigger ground | sensor_ground | single_source | |
| OEM-A36-3 | Power ground (E02) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A36-30 | Engine coolant temperature (THW) | temp_in | SHADOW8-A-20 | Analog voltage 8 (switchable 1k pull-up) | analog_in | single_source | |
| OEM-A36-31 | Ignition coil 3 (IGT3) | ignition_out | SHADOW8-B-29 | Ignition TTL cylinder 3 | ignition_out | single_source | |
| OEM-A36-32 | Injector 3 port (#30) | injector_out | SHADOW8-B-7 | Injector cylinder 6 | injector_out | single_source | |
| OEM-A36-4 | Power ground (E01) | ground | SHADOW8-A-34 + SHADOW8-A-9 | Ground 2 + Ground 1 | ground | single_source | |
| OEM-A36-5 | OCV exhaust bank 2 (OE2) | low_side_out | — | — | — | single_source | |
| OEM-A36-6 | Heated oxygen sensor heater (HT1B) | low_side_out | SHADOW8-B-25 | Aux output 12 | hbridge_out | single_source | |
| OEM-A36-7 | OCV exhaust bank 1 (OE1) | low_side_out | — | — | — | single_source | |
| OEM-A36-8 | Ignition coil 4 (IGT4) | ignition_out | SHADOW8-B-30 | Ignition TTL cylinder 4 | ignition_out | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A33-1 | SP-14V-1 | 0.85 | no route | ECU power (+B2, main relay) | — | |
| W2 | OEM-A34-6 | SP-14V-1 | 0.85 | no route | ECU power (+B, main relay) | — | |
| W3 | SP-14V-1 | SHADOW8-A-1 | 0.85 | no route | ECU supply | — | |
| W4 | SP-14V-1 | SHADOW8-B-26 | 0.85 | no route | Aux 9–12 power supply | — | |
| W5 | OEM-A33-2 | SHADOW8-B-1 | 0.85 | no route | Battery constant (BATT, memory) | — | |
| W6 | OEM-A33-4 | SP-GND-1 | 0.85 | no route | Power ground (EC) | — | |
| W7 | OEM-A34-1 | SP-GND-1 | 0.85 | no route | Power ground (E03) | — | |
| W8 | OEM-A34-2 | SP-GND-1 | 0.85 | no route | Power ground (E04) | — | |
| W9 | OEM-A34-3 | SP-GND-1 | 0.85 | no route | Power ground (E05) | — | |
| W10 | OEM-A36-3 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W11 | OEM-A36-4 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W12 | SP-GND-1 | SHADOW8-A-34 | 0.85 | no route | Ground 2 | — | |
| W13 | SP-GND-1 | SHADOW8-A-9 | 0.85 | no route | Ground 1 | — | |
| W14 | OEM-A33-29 | SP-0V-1 | 0.5 | no route | MAF sensor ground (E2G) | — | |
| W15 | OEM-A34-27 | SP-0V-1 | 0.5 | no route | Crank position return (NE-) | — | |
| W16 | OEM-A35-29 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA) | — | |
| W17 | OEM-A35-30 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (EPA2) | — | |
| W18 | OEM-A36-29 | SP-0V-1 | 0.5 | no route | Sensor ground (E1) | — | |
| W19 | SP-0V-1 | SHADOW8-A-4 | 0.5 | no route | 0V analog reference | — | |
| W20 | SP-0V-1 | SHADOW8-A-7 | 0.5 | no route | Trigger ground | — | |
| W21 | OEM-A34-34 | SP-5V1-1 | 0.5 | no route | OCV power source (VCV, 5V) | — | |
| W22 | OEM-A35-21 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCPA) | — | |
| W23 | OEM-A35-22 | SP-5V1-1 | 0.5 | no route | Accelerator pedal 5V supply (VCP2) | — | |
| W24 | OEM-A36-19 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VC) | — | |
| W25 | SP-5V1-1 | SHADOW8-A-3 | 0.5 | no route | 5.0V sensor supply | — | |
| W26 | OEM-A34-16 | SHADOW8-A-5 | 0.5 | no route | Crank position (NE+) | — | |
| W27 | OEM-A34-14 | SHADOW8-A-6 | 0.5 | no route | VVT cam sensor exhaust bank 1 (EV1+) | — | |
| W28 | OEM-A34-28 | SHADOW8-A-16 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W29 | OEM-A34-17 | SHADOW8-A-24 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W30 | OEM-A36-21 | SHADOW8-B-27 | 0.5 | no route | Ignition coil 1 (IGT1) | — | |
| W31 | OEM-A36-10 | SHADOW8-B-28 | 0.5 | no route | Ignition coil 2 (IGT2) | — | |
| W32 | OEM-A36-31 | SHADOW8-B-29 | 0.5 | no route | Ignition coil 3 (IGT3) | — | |
| W33 | OEM-A36-8 | SHADOW8-B-30 | 0.5 | no route | Ignition coil 4 (IGT4) | — | |
| W34 | OEM-A36-12 | SHADOW8-B-2 | 0.5 | no route | Injector 1 port (#10) | — | |
| W35 | OEM-A36-14 | SHADOW8-B-3 | 0.5 | no route | Injector 1 direct (#1) | — | |
| W36 | OEM-A36-22 | SHADOW8-B-4 | 0.5 | no route | Injector 2 port (#20) | — | |
| W37 | OEM-A36-25 | SHADOW8-B-5 | 0.5 | no route | Injector 2 direct (#2) | — | |
| W38 | OEM-A36-24 | SHADOW8-B-6 | 0.5 | no route | Injector 3 direct (#3) | — | |
| W39 | OEM-A36-32 | SHADOW8-B-7 | 0.5 | no route | Injector 3 port (#30) | — | |
| W40 | OEM-A36-13 | SHADOW8-B-8 | 0.5 | no route | Injector 4 port (#40) | — | |
| W41 | OEM-A36-23 | SHADOW8-B-9 | 0.5 | no route | Injector 4 direct (#4) | — | |
| W42 | OEM-A33-28 | SP-SHD-1 | 0.5 | no route | Shield ground (SLE2) | — | |
| W43 | OEM-A34-29 | SP-SHD-1 | 0.5 | no route | Shield ground (EKNK) | — | |
| W44 | OEM-A34-30 | SP-SHD-1 | 0.5 | no route | Shield ground (SLE1) | — | |
| W45 | OEM-A34-35 | SP-SHD-1 | 0.5 | no route | Shield ground (SLE3) | — | |
| W46 | SP-SHD-1 | SHADOW8-A-8 | 0.5 | no route | Shield | — | |
| W47 | OEM-A33-27 | SHADOW8-B-21 | 0.5 | no route | Ignition switch sense (IGSW, IG2 relay) | — | |
| W48 | OEM-A36-1 | SHADOW8-B-22 | 0.5 | no route | Throttle actuator motor - (M-) | — | |
| W49 | OEM-A36-2 | SHADOW8-B-23 | 0.5 | no route | Throttle actuator motor + (M+) | — | |
| W50 | OEM-A35-13 | SHADOW8-B-10 | 0.5 | no route | EFI main relay 1 (SSHUT) | — | |
| W51 | OEM-A35-12 | SHADOW8-B-11 | 0.5 | no route | Cooling fan relay 2 (FAN2) | — | |
| W52 | OEM-A35-11 | SHADOW8-B-12 | 0.5 | no route | Cooling fan relay 3 (FAN1) | — | |
| W53 | OEM-A33-20 | SHADOW8-B-13 | 0.5 | no route | Blower relay (HB) | — | |
| W54 | OEM-A35-17 | SHADOW8-B-14 | 0.5 | no route | ETCS relay (MCR) | — | |
| W55 | OEM-A35-35 | SHADOW8-B-15 | 0.5 | no route | A/C clutch relay (AC) | — | |
| W56 | OEM-A35-5 | SHADOW8-B-16 | 0.5 | no route | Injector relay (IREL) | — | |
| W57 | OEM-A35-7 | SHADOW8-B-17 | 0.5 | no route | ETCS relay (+BM) | — | |
| W58 | OEM-A34-5 | SHADOW8-B-24 | 0.5 | no route | A/F ratio sensor heater (HA1A) | — | |
| W59 | OEM-A36-6 | SHADOW8-B-25 | 0.5 | no route | Heated oxygen sensor heater (HT1B) | — | |
| W60 | OEM-A33-22 | SHADOW8-A-10 | 0.5 | no route | Mass air flow (VG) | — | |
| W61 | OEM-A34-20 | SHADOW8-A-11 | 0.5 | no route | Manifold absolute pressure (PIM) | — | |
| W62 | OEM-A35-31 | SHADOW8-A-12 | 0.5 | no route | Accelerator pedal position 2 (VPA2) | — | |
| W63 | OEM-A36-28 | SHADOW8-A-13 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W64 | OEM-A35-23 | SHADOW8-A-14 | 0.5 | no route | Accelerator pedal position (VPA) | — | |
| W65 | OEM-A36-18 | SHADOW8-A-18 | 0.5 | no route | Throttle position (VTA1) | — | |
| W66 | OEM-A34-21 | SHADOW8-A-19 | 0.5 | no route | Heated oxygen sensor (OX1B, rear) | — | |
| W67 | OEM-A36-30 | SHADOW8-A-20 | 0.5 | no route | Engine coolant temperature (THW) | — | |
| W68 | OEM-A33-12 | SHADOW8-A-21 | 0.5 | no route | Intake air temperature (THA, in MAF) | — | |
| W69 | OEM-A36-20 | SHADOW8-A-22 | 0.5 | no route | Oil temperature (OT) | — | |
| W70 | OEM-A33-14 | SHADOW8-A-26 | 0.5 | no route | Starter signal (STSW2) | — | |
| W71 | OEM-A33-15 | SHADOW8-A-27 | 0.5 | no route | Clutch switch (CLSW) | — | |
| W72 | OEM-A33-16 | SHADOW8-A-28 | 0.5 | no route | Neutral switch (NSW) | — | |
| W73 | OEM-A33-17 | SHADOW8-A-29 | 0.5 | no route | Starter signal (STSW2) | — | |
| W74 | OEM-A33-3 | SHADOW8-A-30 | 0.5 | no route | Stop light switch (ST1-) | — | |
| W75 | OEM-A33-7 | SHADOW8-A-31 | 0.5 | no route | Stop light switch (STP) | — | |
| W76 | OEM-A35-26 | SHADOW8-B-18 | 0.5 | no route | Starter signal (STA) | — | |
| W77 | OEM-A33-19 | SHADOW8-A-15 | 0.5 | no route | CAN high (CANH) | — | |
| W78 | OEM-A33-18 | SHADOW8-A-23 | 0.5 | no route | CAN low (CANL) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 57.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (15)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 1 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| warn | DBW_MOTOR_CURRENT | SHADOW8-B-22 | Cannot confirm Shadow 8 can drive the throttle motor: SHADOW8-B-22 "Aux output 9" is rated 5.0 A, but the motor current at OEM-A36-1 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | SHADOW8-B-23 | Cannot confirm Shadow 8 can drive the throttle motor: SHADOW8-B-23 "Aux output 10" is rated 5.0 A, but the motor current at OEM-A36-2 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_ISOLATION | SHADOW8-B-26 | SHADOW8-B-26 "Aux 9–12 power supply" is fed from the same net as the ECU main supply (SHADOW8-A-1). Link's S2000 DBW wiring feeds the throttle-motor supply through a separate isolation relay switched by the ECU, so motor power can be cut on a throttle fault. Add one, or confirm Shadow 8 cuts the H-bridge internally. |
| warn | NET_FAMILY | OEM-A34-5 ↔ SHADOW8-B-24 | OEM-A34-5 "A/F ratio sensor heater (HA1A)" [low_side_out] is wired to SHADOW8-B-24 "Aux output 11" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-A36-6 ↔ SHADOW8-B-25 | OEM-A36-6 "Heated oxygen sensor heater (HT1B)" [low_side_out] is wired to SHADOW8-B-25 "Aux output 12" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NO_FUEL_PUMP | fuel pump | This engine harness has no fuel-pump control path: no fuel-pump relay output is wired to the new ECU. If the stock car switches the pump outside the ECU (an airflow-meter contact or a separate module), the standalone must drive the pump relay itself — see the install notes for this car. |
| info | NET_FAMILY | OEM-A33-12 ↔ SHADOW8-A-21 | OEM-A33-12 "Intake air temperature (THA, in MAF)" [temp_in] is wired to SHADOW8-A-21 "Analog voltage 9 (switchable 1k pull-up)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-A35-17 ↔ SHADOW8-B-14 | OEM-A35-17 "ETCS relay (MCR)" [low_side_out] is wired to SHADOW8-B-14 "Aux output 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A35-35 ↔ SHADOW8-B-15 | OEM-A35-35 "A/C clutch relay (AC)" [low_side_out] is wired to SHADOW8-B-15 "Aux output 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A35-5 ↔ SHADOW8-B-16 | OEM-A35-5 "Injector relay (IREL)" [low_side_out] is wired to SHADOW8-B-16 "Aux output 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A35-7 ↔ SHADOW8-B-17 | OEM-A35-7 "ETCS relay (+BM)" [low_side_out] is wired to SHADOW8-B-17 "Aux output 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-A36-20 ↔ SHADOW8-A-22 | OEM-A36-20 "Oil temperature (OT)" [temp_in] is wired to SHADOW8-A-22 "Analog voltage 10 (switchable 1k pull-up)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-A36-30 ↔ SHADOW8-A-20 | OEM-A36-30 "Engine coolant temperature (THW)" [temp_in] is wired to SHADOW8-A-20 "Analog voltage 8 (switchable 1k pull-up)" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 22 optional OEM pins are not mapped: OEM-A33-8 A/C pressure sensor (ACP); OEM-A34-11 DI injector confirmation (IJF1); OEM-A34-13 High-pressure fuel pump spill valve (FPF); OEM-A34-15 VVT cam sensor intake bank 2 (VV2+); OEM-A34-18 A/F ratio sensor (A1A-); OEM-A34-19 A/F ratio sensor (A1A+); OEM-A34-25 VVT cam sensor exhaust bank 2 (EV2+); OEM-A34-26 VVT cam sensor intake bank 1 (VV1+); OEM-A34-31 DI injector confirmation (IJF2); OEM-A34-32 High-pressure fuel pump spill valve (FPD); OEM-A34-9 Fuel pressure sensor (PR); OEM-A35-1 Canister vent valve (VPMP); OEM-A35-10 Fuel pump control monitor (DI); OEM-A35-15 Tachometer output (TACH); OEM-A35-19 Fuel pump control (FPC); OEM-A35-20 Canister pressure sensor (PPMP); OEM-A35-8 Leak detection pump (MPMP); OEM-A36-11 Purge valve (PRG); OEM-A36-16 OCV intake bank 2 (OC2); OEM-A36-17 OCV intake bank 1 (OC1); OEM-A36-5 OCV exhaust bank 2 (OE2); OEM-A36-7 OCV exhaust bank 1 (OE1) |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-09. Review every wire against both manuals before building. Not wired: - OEM-A34 26: VVT cam sensor intake bank 1 (VV1+): no free cam_hall/cam_vr/frequency_in input on Emtron Shadow 8 - OEM-A34 25: VVT cam sensor exhaust bank 2 (EV2+): no free cam_hall/cam_vr/frequency_in input on Emtron Shadow 8 - OEM-A34 15: VVT cam sensor intake bank 2 (VV2+): no free cam_hall/cam_vr/frequency_in input on Emtron Shadow 8 - SHADOW8-A 17: Knock 1 − left open: the stock knock sensor has one ECU wire; check the ECU manual for single-wire knock sensors - SHADOW8-A 25: Knock 2 − left open: the stock knock sensor has one ECU wire; check the ECU manual for single-wire knock sensors - OEM-A36 17: OCV intake bank 1 (OC1): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A36 7: OCV exhaust bank 1 (OE1): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A36 16: OCV intake bank 2 (OC2): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A36 5: OCV exhaust bank 2 (OE2): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A34 13: High-pressure fuel pump spill valve (FPF): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A34 32: High-pressure fuel pump spill valve (FPD): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A35 1: Canister vent valve (VPMP): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A35 19: Fuel pump control (FPC): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A35 8: Leak detection pump (MPMP): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A36 11: Purge valve (PRG): no free low_side/ls_hs/injector/hbridge on Emtron Shadow 8 - OEM-A35 15: Tachometer output (TACH): no free tacho/frequency_out/low_side/ls_hs on Emtron Shadow 8 - OEM-A33 8: A/C pressure sensor (ACP): no free analog_0_5 on Emtron Shadow 8 - OEM-A34 11: DI injector confirmation (IJF1): no free analog_0_5 on Emtron Shadow 8 - OEM-A34 31: DI injector confirmation (IJF2): no free analog_0_5 on Emtron Shadow 8 - OEM-A34 9: Fuel pressure sensor (PR): no free analog_0_5 on Emtron Shadow 8 - OEM-A35 10: Fuel pump control monitor (DI): no free analog_0_5 on Emtron Shadow 8 - OEM-A35 20: Canister pressure sensor (PPMP): no free analog_0_5 on Emtron Shadow 8 - OEM-A34 18: A/F ratio sensor (A1A-): not classified in the library; wire by hand - OEM-A34 19: A/F ratio sensor (A1A+): not classified in the library; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Emtron Shadow 8 ECU datasheet | https://docs.emtronaustralia.com.au/engine-management/datasheets/shadow-8-datasheet/index.html | archive | 2026-10-05 | f004c9a8d60c |
| 4 | vendor_doc | Emtron Shadow 8 pinout | https://docs.emtronaustralia.com.au/engine-management/wiring/shadow-8/shadow-8-pinout/index.html | archive | 2026-10-05 | f510053951c7 |
| 4 | vendor_doc | Scion FR-S / Toyota 86 Repair Manual (2013) — FA20 ECM terminal pinout (SFI system) | https://gt86.me/images/0/09/2013_Scion_FR-S_Repair_Manual.pdf | — | — | — |