Link 1UZ
Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by [email protected] · Rev 1 · draft · 2026-10-10
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 29: read the Findings page before cutting any wire |
| Size of the job | 55 wires · 36 connectors · 11 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | COIL1-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | COIL2-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | COIL3-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | COIL4-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | COIL5-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | COIL6-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | COIL7-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | COIL8-GND | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | APP-VCC1 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | APP-VCC2 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | TB-VCC | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | CKP-A | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | CMP-A | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | KS1-SIG | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | KS2-SIG | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | COIL1-TRG | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | COIL2-TRG | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | COIL3-TRG | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | COIL4-TRG | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | COIL5-TRG | G5VOODOOPROV-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | COIL6-TRG | G5VOODOOPROV-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | COIL7-TRG | G5VOODOOPROV-B-B11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | COIL8-TRG | G5VOODOOPROV-B-B10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | INJ1-SIG | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | INJ2-SIG | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | INJ3-SIG | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | INJ4-SIG | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | INJ5-SIG | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | INJ6-SIG | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | INJ7-SIG | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | INJ8-SIG | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | TB-M- | G5VOODOOPROV-B-B26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | TB-M+ | G5VOODOOPROV-B-B18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | NEW-IGN-1 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | RLY-COIL- | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | WBO-3 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | O2-HTR | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | TB-CL | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | WBO-1 | G5VOODOOPROV-E-E17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | WBO-6 | G5VOODOOPROV-E-E19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | WBO-2 | G5VOODOOPROV-E-E16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | MAF-SIG | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | APP-SIG1 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | APP-SIG2 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | TB-TPS1 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | TB-TPS2 | G5VOODOOPROV-B-B33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | O2-SIG | G5VOODOOPROV-B-B15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | ECT-SIG | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | MAF-IAT | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | BAT-+ | F1-1 | 3.0 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | F1-2 | RLY-IN | 3.0 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | RLY-OUT | SP-14V-1 | 3.0 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | BAT-- | SP-GND-1 | 3.0 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | NEW-IGN-1 | RLY-COIL+ | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | APP-VCC1 | BAT-- | open (OL) | 5 V sensor reference must not touch power ground | |
| 2 | NEW-IGN-1 | BAT-- | open (OL) | +12 V supply must not touch power ground | |
| 3 | APP-VCC1 | F1-1 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 4 | APP-VCC1 | F1-2 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 5 | APP-VCC1 | NEW-IGN-1 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 6 | APP-VCC1 | RLY-OUT | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 7 | BAT-- | F1-1 | open (OL) | power ground must not touch +12 V supply | |
| 8 | BAT-- | F1-2 | open (OL) | power ground must not touch +12 V supply | |
| 9 | BAT-- | RLY-OUT | open (OL) | power ground must not touch +12 V supply |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| 1 | Before edits | [email protected] | 2026-10-09 |
Schematic
Connectors
APP
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG1 | Pedal position 1 | — | W44 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| VCC1 | Pedal 1 5V supply | — | W9 | — | 0.5 | SP-5V1-1 | — | — | — |
| GND1 | Pedal 1 low ref | — | — | — | — | — | — | — | — |
| SIG2 | Pedal position 2 | — | W45 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| VCC2 | Pedal 2 5V supply | — | W10 | — | 0.5 | SP-5V1-1 | — | — | — |
| GND2 | Pedal 2 low ref | — | — | — | — | — | — | — | — |
BAT
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| + | Battery positive | — | W51 | — | 3.0 | F1-1 | — | — | — |
| - | Battery negative / chassis ground | — | W54 | — | 3.0 | SP-GND-1 | — | — | — |
CKP
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Crank sensor + | — | W13 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| B | Crank sensor − | — | — | — | — | — | — | — | — |
CMP
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A | Cam sensor + | — | W14 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| B | Cam sensor − | — | — | — | — | — | — | — | — |
COIL1
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W17 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
COIL2
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W18 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
COIL3
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W19 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
COIL4
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W20 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
COIL5
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W21 | — | 0.5 | G5VOODOOPROV-B-B13 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
COIL6
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W22 | — | 0.5 | G5VOODOOPROV-B-B12 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
COIL7
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W23 | — | 0.5 | G5VOODOOPROV-B-B11 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
COIL8
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| TRG | Coil trigger | — | W24 | — | 0.5 | G5VOODOOPROV-B-B10 | — | — | — |
| 12V | Coil +12V | — | — | — | — | — | — | — | — |
| GND | Coil ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
ECT
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | ECT signal | — | W49 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| GND | ECT sensor ground | — | — | — | — | — | — | — | — |
F1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W51 | — | 3.0 | BAT-+ | — | — | — |
| 2 | — | — | W52 | — | 3.0 | RLY-IN | — | — | — |
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W28 | — | 0.5 | INJ4-SIG | — | — | — |
| A10 | Ignition 4 | — | W20 | — | 0.5 | COIL4-TRG | — | — | — |
| A11 | Ignition 3 | — | W19 | — | 0.5 | COIL3-TRG | — | — | — |
| A12 | Ignition 2 | — | W18 | — | 0.5 | COIL2-TRG | — | — | — |
| A13 | Ignition 1 | — | W17 | — | 0.5 | COIL1-TRG | — | — | — |
| A14 | Analogue Volt 4 | — | W46 | — | 0.5 | TB-TPS1 | — | — | — |
| A15 | Analogue Temp 1 | — | W49 | — | 0.5 | ECT-SIG | — | — | — |
| A16 | Analogue Temp 2 | — | W50 | — | 0.5 | MAF-IAT | — | — | — |
| A17 | Analogue Volt 1 | — | W43 | — | 0.5 | MAF-SIG | — | — | — |
| A18 | Aux 4 | — | — | — | — | — | — | — | — |
| A19 | Aux 3 | — | — | — | — | — | — | — | — |
| A2 | Injection 3 | — | W27 | — | 0.5 | INJ3-SIG | — | — | — |
| A20 | Aux 2 | — | W39 | — | 0.5 | TB-CL | — | — | — |
| A21 | Aux 1 | — | W36 | — | 0.5 | RLY-COIL- | — | — | — |
| A22 | Analogue Volt 2 | — | W44 | — | 0.5 | APP-SIG1 | — | — | — |
| A23 | Digital Input 3 | — | — | — | — | — | — | — | — |
| A26 | Aux 8 | — | — | — | — | — | — | — | — |
| A27 | Aux 7 | — | — | — | — | — | — | — | — |
| A28 | Aux 6 | — | — | — | — | — | — | — | — |
| A29 | Aux 5 | — | — | — | — | — | — | — | — |
| A3 | Injection 2 | — | W26 | — | 0.5 | INJ2-SIG | — | — | — |
| A30 | Digital Input 1 | — | — | — | — | — | — | — | — |
| A31 | Digital Input 2 | — | — | — | — | — | — | — | — |
| A32 | +5V Out | — | W12 | — | 0.5 | SP-5V1-1 | — | — | — |
| A33 | Analogue Volt 3 | — | W45 | — | 0.5 | APP-SIG2 | — | — | — |
| A4 | Injection 1 | — | W25 | — | 0.5 | INJ1-SIG | — | — | — |
| A6 | Ignition Switch | — | W35 | — | 0.5 | NEW-IGN-1 | — | — | — |
| A8 | Trigger 1 | — | W13 | — | 0.5 | CKP-A | — | — | — |
| A9 | Trigger 2 | — | W14 | — | 0.5 | CMP-A | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W32 | — | 0.5 | INJ8-SIG | — | — | — |
| B10 | Ignition 8 | — | W24 | — | 0.5 | COIL8-TRG | — | — | — |
| B11 | Ignition 7 | — | W23 | — | 0.5 | COIL7-TRG | — | — | — |
| B12 | Ignition 6 | — | W22 | — | 0.5 | COIL6-TRG | — | — | — |
| B13 | Ignition 5 | — | W21 | — | 0.5 | COIL5-TRG | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | W48 | — | 0.5 | O2-SIG | — | — | — |
| B16 | Analogue Volt 7 | — | — | — | — | — | — | — | — |
| B18 | Aux 9 | — | W34 | — | 0.5 | TB-M+ | — | — | — |
| B19 | Digital Input 6 | — | — | — | — | — | — | — | — |
| B2 | Injection 7 | — | W31 | — | 0.5 | INJ7-SIG | — | — | — |
| B20 | Digital Input 5 | — | — | — | — | — | — | — | — |
| B21 | Digital Input 4 | — | — | — | — | — | — | — | — |
| B23 | Analogue Volt 8 | — | — | — | — | — | — | — | — |
| B24 | Analogue Volt 9 | — | — | — | — | — | — | — | — |
| B26 | Aux 10 | — | W33 | — | 0.5 | TB-M- | — | — | — |
| B27 | Digital Input 10 | — | — | — | — | — | — | — | — |
| B28 | Digital Input 9 | — | — | — | — | — | — | — | — |
| B29 | Digital Input 8 | — | — | — | — | — | — | — | — |
| B3 | Injection 6 | — | W30 | — | 0.5 | INJ6-SIG | — | — | — |
| B30 | Digital Input 7 | — | — | — | — | — | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | W47 | — | 0.5 | TB-TPS2 | — | — | — |
| B4 | Injection 5 | — | W29 | — | 0.5 | INJ5-SIG | — | — | — |
| B6 | Analogue Temp 3 | — | — | — | — | — | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W16 | — | 0.5 | KS2-SIG | — | — | — |
| B9 | Knock 1 | — | W15 | — | 0.5 | KS1-SIG | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W37 | — | 0.5 | WBO-3 | — | — | — |
| E16 | RE 1 | — | W42 | — | 0.5 | WBO-2 | — | — | — |
| E17 | IPE 1 | — | W40 | — | 0.5 | WBO-1 | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | W41 | — | 0.5 | WBO-6 | — | — | — |
| E2 | Injection 11 | — | — | — | — | — | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W38 | — | 0.5 | O2-HTR | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | — | — | — | — | — | — | — |
| E4 | Injection 9 | — | — | — | — | — | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
INJ1
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W25 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
INJ2
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W26 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
INJ3
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W27 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
INJ4
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W28 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
INJ5
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W29 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
INJ6
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W30 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
INJ7
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W31 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
INJ8
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Injector low side | — | W32 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 12V | Injector +12V (main relay) | — | — | — | — | — | — | — | — |
KS1
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Knock signal | — | W15 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| GND | Knock shield/return | — | — | — | — | — | — | — | — |
KS2
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | Knock signal | — | W16 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| GND | Knock shield/return | — | — | — | — | — | — | — | — |
MAF
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | MAF signal (analog) | — | W43 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 12V | MAF +12V | — | — | — | — | — | — | — | — |
| GND | MAF ground | — | — | — | — | — | — | — | — |
| IAT | IAT signal | — | W50 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| IATGND | IAT ground | — | — | — | — | — | — | — | — |
NEW-IGN
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W55 | — | 0.5 | RLY-COIL+ | — | — | — |
| 1 | — | — | W35 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
O2
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| SIG | O2 signal | — | W48 | — | 0.5 | G5VOODOOPROV-B-B15 | — | — | — |
| GND | O2 signal ground | — | — | — | — | — | — | — | — |
| HTR | O2 heater low side | — | W38 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| HTR+ | O2 heater supply | — | — | — | — | — | — | — | — |
RLY
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| COIL+ | Relay coil positive (ignition-switched +12V) | — | W55 | — | 0.5 | NEW-IGN-1 | — | — | — |
| COIL- | Relay coil negative (ECU low-side driver) | — | W36 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| IN | Relay contact input (battery + via main fuse) | — | W52 | — | 3.0 | F1-2 | — | — | — |
| OUT | Relay contact output (switched +12V bus) | — | W53 | — | 3.0 | SP-14V-1 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W53 | — | 3.0 | RLY-OUT | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W12 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
| 1 | — | — | W9 | — | 0.5 | APP-VCC1 | — | — | — |
| 1 | — | — | W10 | — | 0.5 | APP-VCC2 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | TB-VCC | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | COIL1-GND | — | — | — |
| 1 | — | — | W2 | — | 0.85 | COIL2-GND | — | — | — |
| 1 | — | — | W3 | — | 0.85 | COIL3-GND | — | — | — |
| 1 | — | — | W4 | — | 0.85 | COIL4-GND | — | — | — |
| 1 | — | — | W5 | — | 0.85 | COIL5-GND | — | — | — |
| 1 | — | — | W6 | — | 0.85 | COIL6-GND | — | — | — |
| 1 | — | — | W7 | — | 0.85 | COIL7-GND | — | — | — |
| 1 | — | — | W8 | — | 0.85 | COIL8-GND | — | — | — |
| 1 | — | — | W54 | — | 3.0 | BAT-- | — | — | — |
TB
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| M+ | Throttle motor + | — | W34 | — | 0.5 | G5VOODOOPROV-B-B18 | — | — | — |
| M- | Throttle motor − | — | W33 | — | 0.5 | G5VOODOOPROV-B-B26 | — | — | — |
| CL | Magnetic clutch low side (15 A) | — | W39 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| TPS1 | Throttle position 1 | — | W46 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| TPS2 | Throttle position 2 | — | W47 | — | 0.5 | G5VOODOOPROV-B-B33 | — | — | — |
| VCC | Throttle 5V supply | — | W11 | — | 0.5 | SP-5V1-1 | — | — | — |
| GND | Throttle sensor ground | — | — | — | — | — | — | — | — |
WBO
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Pump current (Ip) | — | W40 | — | 0.5 | G5VOODOOPROV-E-E17 | — | — | — |
| 2 | Virtual ground (VM) | — | W42 | — | 0.5 | G5VOODOOPROV-E-E16 | — | — | — |
| 3 | Heater − | — | W37 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 4 | Heater + | — | — | — | — | — | — | — | — |
| 5 | Trim resistor (IA) | — | — | — | — | — | — | — | — |
| 6 | Nernst cell (UN) | — | W41 | — | 0.5 | G5VOODOOPROV-E-E19 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| No mapped pins. | |||||||
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | COIL1-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W2 | COIL2-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W3 | COIL3-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W4 | COIL4-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W5 | COIL5-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W6 | COIL6-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W7 | COIL7-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W8 | COIL8-GND | SP-GND-1 | 0.85 | no route | Coil ground | — | |
| W9 | APP-VCC1 | SP-5V1-1 | 0.5 | no route | Pedal 1 5V supply | — | |
| W10 | APP-VCC2 | SP-5V1-1 | 0.5 | no route | Pedal 2 5V supply | — | |
| W11 | TB-VCC | SP-5V1-1 | 0.5 | no route | Throttle 5V supply | — | |
| W12 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | no route | +5V Out | — | |
| W13 | CKP-A | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank sensor + | — | |
| W14 | CMP-A | G5VOODOOPROV-A-A9 | 0.5 | no route | Cam sensor + | — | |
| W15 | KS1-SIG | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock signal | — | |
| W16 | KS2-SIG | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock signal | — | |
| W17 | COIL1-TRG | G5VOODOOPROV-A-A13 | 0.5 | no route | Coil trigger | — | |
| W18 | COIL2-TRG | G5VOODOOPROV-A-A12 | 0.5 | no route | Coil trigger | — | |
| W19 | COIL3-TRG | G5VOODOOPROV-A-A11 | 0.5 | no route | Coil trigger | — | |
| W20 | COIL4-TRG | G5VOODOOPROV-A-A10 | 0.5 | no route | Coil trigger | — | |
| W21 | COIL5-TRG | G5VOODOOPROV-B-B13 | 0.5 | no route | Coil trigger | — | |
| W22 | COIL6-TRG | G5VOODOOPROV-B-B12 | 0.5 | no route | Coil trigger | — | |
| W23 | COIL7-TRG | G5VOODOOPROV-B-B11 | 0.5 | no route | Coil trigger | — | |
| W24 | COIL8-TRG | G5VOODOOPROV-B-B10 | 0.5 | no route | Coil trigger | — | |
| W25 | INJ1-SIG | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector low side | — | |
| W26 | INJ2-SIG | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector low side | — | |
| W27 | INJ3-SIG | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector low side | — | |
| W28 | INJ4-SIG | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector low side | — | |
| W29 | INJ5-SIG | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector low side | — | |
| W30 | INJ6-SIG | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector low side | — | |
| W31 | INJ7-SIG | G5VOODOOPROV-B-B2 | 0.5 | no route | Injector low side | — | |
| W32 | INJ8-SIG | G5VOODOOPROV-B-B1 | 0.5 | no route | Injector low side | — | |
| W33 | TB-M- | G5VOODOOPROV-B-B26 | 0.5 | no route | Throttle motor − | — | |
| W34 | TB-M+ | G5VOODOOPROV-B-B18 | 0.5 | no route | Throttle motor + | — | |
| W35 | NEW-IGN-1 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition Switch | — | |
| W36 | RLY-COIL- | G5VOODOOPROV-A-A21 | 0.5 | no route | Relay coil negative (ECU low-side driver) | — | |
| W37 | WBO-3 | G5VOODOOPROV-E-E15 | 0.5 | no route | Heater − | — | |
| W38 | O2-HTR | G5VOODOOPROV-E-E22 | 0.5 | no route | O2 heater low side | — | |
| W39 | TB-CL | G5VOODOOPROV-A-A20 | 0.5 | no route | Magnetic clutch low side (15 A) | — | |
| W40 | WBO-1 | G5VOODOOPROV-E-E17 | 0.5 | no route | Pump current (Ip) | — | |
| W41 | WBO-6 | G5VOODOOPROV-E-E19 | 0.5 | no route | Nernst cell (UN) | — | |
| W42 | WBO-2 | G5VOODOOPROV-E-E16 | 0.5 | no route | Virtual ground (VM) | — | |
| W43 | MAF-SIG | G5VOODOOPROV-A-A17 | 0.5 | no route | MAF signal (analog) | — | |
| W44 | APP-SIG1 | G5VOODOOPROV-A-A22 | 0.5 | no route | Pedal position 1 | — | |
| W45 | APP-SIG2 | G5VOODOOPROV-A-A33 | 0.5 | no route | Pedal position 2 | — | |
| W46 | TB-TPS1 | G5VOODOOPROV-A-A14 | 0.5 | no route | Throttle position 1 | — | |
| W47 | TB-TPS2 | G5VOODOOPROV-B-B33 | 0.5 | no route | Throttle position 2 | — | |
| W48 | O2-SIG | G5VOODOOPROV-B-B15 | 0.5 | no route | O2 signal | — | |
| W49 | ECT-SIG | G5VOODOOPROV-A-A15 | 0.5 | no route | ECT signal | — | |
| W50 | MAF-IAT | G5VOODOOPROV-A-A16 | 0.5 | no route | IAT signal | — | |
| W51 | BAT-+ | F1-1 | 3.0 | no route | Battery positive | — | |
| W52 | F1-2 | RLY-IN | 3.0 | no route | Relay contact input (battery + via main fuse) | — | |
| W53 | RLY-OUT | SP-14V-1 | 3.0 | no route | Relay contact output (switched +12V bus) | — | |
| W54 | BAT-- | SP-GND-1 | 3.0 | no route | Battery negative / chassis ground | — | |
| W55 | NEW-IGN-1 | RLY-COIL+ | 0.5 | no route | Relay coil positive (ignition-switched +12V) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | GM-LS-APP | GM | GM LS accelerator pedal plug (P/N unknown; 6-way) | 1.000 | ea |
| connector | LSU49-MATING-6W | Bosch | LSU 4.9 mating plug, 6-way (placeholder P/N) | 1.000 | ea |
| connector | TOYOTA-1UZ-COP | Denso | 1UZ-FE VVT-i coil-on-plug (Denso 90919-02228; plug P/N unknown; 3-way, metered) | 8.000 | ea |
| connector | TOYOTA-1UZ-INJ | Denso | 1UZ-FE fuel injector plug (P/N unknown; 2-way, metered) | 8.000 | ea |
| connector | TOYOTA-1UZ-MAF | Denso | 1UZ-FE VVT-i hot-wire MAF plug (P/N unknown; 5-way, metered) | 1.000 | ea |
| connector | TOYOTA-1UZ-TB | Denso | 1UZ-FE VVT-i electronic throttle body plug (P/N unknown; 7-way, metered) | 1.000 | ea |
| connector | TOYOTA-2JZ-CKP | Denso | 2JZ-GTE crank position sensor plug (P/N unknown; 2-way) | 1.000 | ea |
| connector | TOYOTA-2JZ-CMP | Denso | 2JZ-GTE cam position sensor plug (P/N unknown; 2-way) | 1.000 | ea |
| connector | TOYOTA-2JZ-ECT | Denso | 2JZ-GTE ECT sensor plug (P/N unknown; 2-way) | 1.000 | ea |
| connector | TOYOTA-2JZ-KS | Denso | 2JZ-GTE knock sensor plug (P/N unknown; 2-way) | 2.000 | ea |
| connector | TOYOTA-2JZ-O2 | Denso | 2JZ-GTE O2 sensor plug (P/N unknown; 4-way) | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| cam | CMP | Cam sensor + | vr | G5VOODOOPROV-A-A9 | Trigger 2 | cam_hall | — |
| cam | CMP | Cam sensor − | vr | — | — | — | — |
| coil | COIL1 | Coil trigger | — | G5VOODOOPROV-A-A13 | Ignition 1 | ignition | — |
| coil | COIL2 | Coil trigger | — | G5VOODOOPROV-A-A12 | Ignition 2 | ignition | — |
| coil | COIL3 | Coil trigger | — | G5VOODOOPROV-A-A11 | Ignition 3 | ignition | — |
| coil | COIL4 | Coil trigger | — | G5VOODOOPROV-A-A10 | Ignition 4 | ignition | — |
| coil | COIL5 | Coil trigger | — | G5VOODOOPROV-B-B13 | Ignition 5 | ignition | — |
| coil | COIL6 | Coil trigger | — | G5VOODOOPROV-B-B12 | Ignition 6 | ignition | — |
| coil | COIL7 | Coil trigger | — | G5VOODOOPROV-B-B11 | Ignition 7 | ignition | — |
| coil | COIL8 | Coil trigger | — | G5VOODOOPROV-B-B10 | Ignition 8 | ignition | — |
| crank | CKP | Crank sensor + | vr | G5VOODOOPROV-A-A8 | Trigger 1 | crank_vr | — |
| crank | CKP | Crank sensor − | vr | — | — | — | — |
| dbw_motor | TB | Throttle motor + | — | G5VOODOOPROV-B-B18 | Aux 9 | hbridge | — |
| dbw_motor | TB | Throttle motor − | — | G5VOODOOPROV-B-B26 | Aux 10 | hbridge | — |
| dbw_pedal | APP | Pedal position 1 | 0_5v | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_0_5 | — |
| dbw_pedal | APP | Pedal position 2 | 0_5v | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_0_5 | — |
| dbw_tps | TB | Throttle position 1 | 0_5v | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_0_5 | — |
| dbw_tps | TB | Throttle position 2 | 0_5v | G5VOODOOPROV-B-B33 | Analogue Volt 5 | analog_0_5 | — |
| heater | O2 | O2 heater low side | — | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | heater_low_side | — |
| injector | INJ1 | Injector low side | — | G5VOODOOPROV-A-A4 | Injection 1 | injector | — |
| injector | INJ2 | Injector low side | — | G5VOODOOPROV-A-A3 | Injection 2 | injector | — |
| injector | INJ3 | Injector low side | — | G5VOODOOPROV-A-A2 | Injection 3 | injector | — |
| injector | INJ4 | Injector low side | — | G5VOODOOPROV-A-A1 | Injection 4 | injector | — |
| injector | INJ5 | Injector low side | — | G5VOODOOPROV-B-B4 | Injection 5 | injector | — |
| injector | INJ6 | Injector low side | — | G5VOODOOPROV-B-B3 | Injection 6 | injector | — |
| injector | INJ7 | Injector low side | — | G5VOODOOPROV-B-B2 | Injection 7 | injector | — |
| injector | INJ8 | Injector low side | — | G5VOODOOPROV-B-B1 | Injection 8 | injector | — |
| knock | KS1 | Knock signal | — | G5VOODOOPROV-B-B9 | Knock 1 | knock | — |
| knock | KS2 | Knock signal | — | G5VOODOOPROV-B-B8 | Knock 2 | knock | — |
| maf | MAF | MAF signal (analog) | 0_5v | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_0_5 | — |
| o2 | O2 | O2 signal | 0_5v | G5VOODOOPROV-B-B15 | Analogue Volt 6 | analog_0_5 | — |
| solenoid | TB | Magnetic clutch low side (15 A) | — | G5VOODOOPROV-A-A20 | Aux 2 | low_side | — |
| temp | ECT | ECT signal | thermistor | G5VOODOOPROV-A-A15 | Analogue Temp 1 | thermistor | — |
| temp | MAF | IAT signal | thermistor | G5VOODOOPROV-A-A16 | Analogue Temp 2 | thermistor | — |
Findings
Open (38)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | PHYS_REQUIRED_OPEN | APP-GND1 | APP-GND1 "Pedal 1 low ref" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | APP-GND2 | APP-GND2 "Pedal 2 low ref" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | CKP-B | CKP-B "Crank sensor −" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | CMP-B | CMP-B "Cam sensor −" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL1-12V | COIL1-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL2-12V | COIL2-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL3-12V | COIL3-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL4-12V | COIL4-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL5-12V | COIL5-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL6-12V | COIL6-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL7-12V | COIL7-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | COIL8-12V | COIL8-12V "Coil +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | ECT-GND | ECT-GND "ECT sensor ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ1-12V | INJ1-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ2-12V | INJ2-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ3-12V | INJ3-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ4-12V | INJ4-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ5-12V | INJ5-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ6-12V | INJ6-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ7-12V | INJ7-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | INJ8-12V | INJ8-12V "Injector +12V (main relay)" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | KS1-GND | KS1-GND "Knock shield/return" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | KS2-GND | KS2-GND "Knock shield/return" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | MAF-12V | MAF-12V "MAF +12V" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | MAF-GND | MAF-GND "MAF ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | MAF-IATGND | MAF-IATGND "IAT ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | TB-GND | TB-GND "Throttle sensor ground" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | WBO-4 | WBO-4 "Heater +" is required but not wired. |
| error | PHYS_REQUIRED_OPEN | WBO-5 | WBO-5 "Trim resistor (IA)" is required but not wired. |
| warn | NET_FAMILY | G5VOODOOPROV-A-A10 ↔ COIL4-TRG | G5VOODOOPROV-A-A10 "Ignition 4" [ignition_out] is wired to COIL4-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| warn | NET_FAMILY | G5VOODOOPROV-A-A11 ↔ COIL3-TRG | G5VOODOOPROV-A-A11 "Ignition 3" [ignition_out] is wired to COIL3-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| warn | NET_FAMILY | G5VOODOOPROV-A-A12 ↔ COIL2-TRG | G5VOODOOPROV-A-A12 "Ignition 2" [ignition_out] is wired to COIL2-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| warn | NET_FAMILY | G5VOODOOPROV-A-A13 ↔ COIL1-TRG | G5VOODOOPROV-A-A13 "Ignition 1" [ignition_out] is wired to COIL1-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| warn | NET_FAMILY | G5VOODOOPROV-B-B10 ↔ COIL8-TRG | G5VOODOOPROV-B-B10 "Ignition 8" [ignition_out] is wired to COIL8-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| warn | NET_FAMILY | G5VOODOOPROV-B-B11 ↔ COIL7-TRG | G5VOODOOPROV-B-B11 "Ignition 7" [ignition_out] is wired to COIL7-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| warn | NET_FAMILY | G5VOODOOPROV-B-B12 ↔ COIL6-TRG | G5VOODOOPROV-B-B12 "Ignition 6" [ignition_out] is wired to COIL6-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| warn | NET_FAMILY | G5VOODOOPROV-B-B13 ↔ COIL5-TRG | G5VOODOOPROV-B-B13 "Ignition 5" [ignition_out] is wired to COIL5-TRG "Coil trigger" [load]. Ignition outputs are often logic-level drivers for coils with built-in igniters; confirm the channel can sink this load. |
| info | NET_FAMILY | G5VOODOOPROV-A-A6 ↔ RLY-COIL+ | G5VOODOOPROV-A-A6 "Ignition Switch" [digital_in] is wired to RLY-COIL+ "Relay coil positive (ignition-switched +12V)" [power_in]. Switched supply used as the ignition-on sense. |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Engine harness for Toyota 1UZ-FE VVT-i, generated by engine_build() on 2026-10-09. Draft: engine-side plugs are named by function; meter each pin at the component, and confirm cylinder numbering and firing order, before crimping. Power layer to finish: size main fuse F1 for the total load, and feed NEW-IGN from the ignition switch (key-on +12 V). Pigtails: 0 plug(s) as ready-made pigtails; no pigtail sourced yet for APP, CKP, CMP, COIL1, COIL2, COIL3, COIL4, COIL5, COIL6, COIL7, COIL8, ECT, INJ1, INJ2, INJ3, INJ4, INJ5, INJ6, INJ7, INJ8, KS1, KS2, MAF, O2, TB, WBO (loose mating plug in the parts list). Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - CKP B: CKP Crank sensor −: single-ended input on Link G5 Voodoo Pro V1 but no sensor ground to return it to - CMP B: CMP Cam sensor −: single-ended input on Link G5 Voodoo Pro V1 but no sensor ground to return it to - COIL1 12V: COIL1 Coil +12V: no rule for class switched_feed; wire by hand - INJ1 12V: INJ1 Injector +12V (main relay): no rule for class switched_feed; wire by hand - KS1 GND: KS1 Knock shield/return: no rule for class ground_sensor; wire by hand - COIL2 12V: COIL2 Coil +12V: no rule for class switched_feed; wire by hand - INJ2 12V: INJ2 Injector +12V (main relay): no rule for class switched_feed; wire by hand - KS2 GND: KS2 Knock shield/return: no rule for class ground_sensor; wire by hand - COIL3 12V: COIL3 Coil +12V: no rule for class switched_feed; wire by hand - INJ3 12V: INJ3 Injector +12V (main relay): no rule for class switched_feed; wire by hand - COIL4 12V: COIL4 Coil +12V: no rule for class switched_feed; wire by hand - INJ4 12V: INJ4 Injector +12V (main relay): no rule for class switched_feed; wire by hand - COIL5 12V: COIL5 Coil +12V: no rule for class switched_feed; wire by hand - INJ5 12V: INJ5 Injector +12V (main relay): no rule for class switched_feed; wire by hand - COIL6 12V: COIL6 Coil +12V: no rule for class switched_feed; wire by hand - INJ6 12V: INJ6 Injector +12V (main relay): no rule for class switched_feed; wire by hand - COIL7 12V: COIL7 Coil +12V: no rule for class switched_feed; wire by hand - INJ7 12V: INJ7 Injector +12V (main relay): no rule for class switched_feed; wire by hand - COIL8 12V: COIL8 Coil +12V: no rule for class switched_feed; wire by hand - INJ8 12V: INJ8 Injector +12V (main relay): no rule for class switched_feed; wire by hand - APP GND1: APP Pedal 1 low ref: no rule for class ground_sensor; wire by hand - APP GND2: APP Pedal 2 low ref: no rule for class ground_sensor; wire by hand - ECT GND: ECT ECT sensor ground: no rule for class ground_sensor; wire by hand - MAF 12V: MAF MAF +12V: no rule for class switched_feed; wire by hand - MAF GND: MAF MAF ground: no rule for class ground_sensor; wire by hand - MAF IATGND: MAF IAT ground: no rule for class ground_sensor; wire by hand - TB GND: TB Throttle sensor ground: no rule for class ground_sensor; wire by hand - Fuel-pump control: Link G5 Voodoo Pro V1 needs to drive the fuel pump, but the stock ECU has no fuel-pump output (an airflow-meter contact or a separate module runs it). Add a fuel-pump relay on a spare low-side output — see the install notes for this car. Not wired: - WBO 5: WBO Trim resistor (IA): no free wb_cal on Link G5 Voodoo Pro V1 - WBO 4: WBO Heater +: no rule for class switched_feed; wire by hand - O2 GND: O2 O2 signal ground: no rule for class ground_sensor; wire by hand - O2 HTR+: O2 O2 heater supply: no rule for class switched_feed; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Emtron SL4/SL6/SL8 pinout pages | https://docs.emtronaustralia.com.au/engine-management/wiring/index.html | archive | 2026-10-05 | e52b3da9996a |
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 4 | vendor_doc | Link SupraLink TS2JZX install manual (JZA80 2JZ-GTE non-VVT) | https://linkecu.com/documentation/TS2JZX.pdf | — | — | — |
| 4 | oem_manual | Mazda MX-5 NB2 (2003) wiring diagram — engine / starting / charging | https://web.archive.org/web/20191104195207/http://mellens.net/mazda/mazda_miata_extra_manual/2003_wiring.pdf | — | 2026-10-05 | 5ee0777f12c1 |
| 3 | forum | rusEFI Mazda Miata 2002 engine wiring | https://github.com/rusefi/rusefi/wiki/Mazda-Miata-2002 | archive | 2026-10-05 | cc3cae670408 |
| 2 | derived | Commonly published Bosch LSU 4.9 pinout | — | — | — | — |
| 2 | community_copy | Lextreme: Adaptronic install for 1UZ-FE (Lexus LS400/SC400) — 4-plug A/B/C/D ECU pin table (1992 LS400) | https://www.lextreme.com/installation-of-an-adaptronic-ecu-for-a-lexus-ls400-sc400-1uzfe-engine/ | — | — | — |
| 2 | community_copy | lt1swap.com: E38 ECM Connector Pinouts | https://lt1swap.com/E38 ECM Connector Pinouts.htm | — | — | — |