BMW 3 Series E46 1998–2006 (M54) → DTAFast T8 (auto)
BMW 3 Series E46 1998–2006 (M54) — DTAFast — T8
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 3: read the Findings page before cutting any wire |
| Size of the job | 69 wires · 12 connectors · 3 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | T8-C1-31 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-X60001-7 | T8-C3-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-X60001-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-X60001-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-X60001-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-X60005-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | T8-C1-13 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | T8-C1-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-X60002-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-X60002-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-X60002-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-X60002-24 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-X60003-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X60003-17 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X60003-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X60003-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X60003-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X60003-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X60003-25 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X60003-28 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X60004-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-X60004-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | T8-C2-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | T8-C2-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-X60003-7 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-X60004-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-X60004-9 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-5V1-1 | T8-C2-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-X60003-8 | T8-C2-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X60003-2 | T8-C2-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X60003-5 | T8-C2-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X60005-3 | T8-C1-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X60005-2 | T8-C1-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X60005-1 | T8-C1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X60005-9 | T8-C1-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X60005-8 | T8-C1-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X60005-7 | T8-C1-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X60003-33 | T8-C1-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X60003-34 | T8-C1-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X60003-35 | T8-C1-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X60003-36 | T8-C1-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X60003-37 | T8-C1-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X60003-38 | T8-C1-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X60001-1 | T8-C1-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X60002-23 | T8-C1-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X60004-10 | T8-C1-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X60002-1 | T8-C3-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X60002-13 | T8-C3-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-X60002-19 | T8-C3-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X60002-7 | T8-C3-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-X60003-40 | T8-C3-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X60003-41 | T8-C3-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X60003-42 | T8-C3-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X60003-45 | T8-C3-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X60003-49 | T8-C3-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X60003-1 | T8-C2-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X60003-19 | T8-C2-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X60004-8 | T8-C2-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X60003-10 | T8-C2-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-X60004-13 | T8-C2-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-X60002-14 | T8-C2-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-X60002-15 | T8-C3-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-X60002-16 | T8-C3-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-X60002-18 | T8-C2-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-X60003-24 | T8-C2-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-X60003-22 | T8-C2-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-X60003-27 | T8-C2-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | T8-C1-31 | T8-C2-21 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | T8-C3-26 | T8-C2-21 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | T8-C1-13 | T8-C1-31 | open (OL) | power ground must not touch +12 V supply | |
| 4 | T8-C1-13 | T8-C2-24 | open (OL) | power ground must not touch 5 V sensor reference | |
| 5 | T8-C1-13 | T8-C3-26 | open (OL) | power ground must not touch +12 V supply | |
| 6 | T8-C1-31 | T8-C2-24 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 7 | T8-C2-21 | T8-C2-24 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 8 | T8-C3-26 | T8-C2-24 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
OEM-X60001
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector/unloader relay control (terminal 15) | — | W46 | — | 0.5 | T8-C1-5 | — | — | — |
| 4 | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Battery constant (terminal 30) | — | W4 | — | 0.85 | T8-C3-26 | — | — | — |
| 8 | ECU main power (terminal 87 via main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Voltage supply (injector / fuse carrier) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
OEM-X60002
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | O2 sensor heater, bank 1 pre-cat | — | W49 | — | 0.5 | T8-C3-9 | — | — | — |
| 13 | O2 sensor heater, bank 2 pre-cat | — | W50 | — | 0.5 | T8-C3-3 | — | — | — |
| 14 | O2 sensor signal, bank 1 pre-cat | — | W63 | — | 0.5 | T8-C2-19 | — | — | — |
| 15 | O2 sensor signal, bank 2 pre-cat | — | W64 | — | 0.5 | T8-C3-17 | — | — | — |
| 16 | O2 sensor signal, bank 1 post-cat | — | W65 | — | 0.5 | T8-C3-18 | — | — | — |
| 18 | O2 sensor signal, bank 2 post-cat | — | W66 | — | 0.5 | T8-C2-34 | — | — | — |
| 19 | O2 sensor heater, bank 2 post-cat | — | W51 | — | 0.5 | T8-C3-22 | — | — | — |
| 20 | O2 sensor ground, bank 1 pre-cat | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | O2 sensor ground, bank 2 pre-cat | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | O2 sensor ground, bank 1 post-cat | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Main relay control | — | W47 | — | 0.5 | T8-C1-4 | — | — | — |
| 24 | O2 sensor ground, bank 2 post-cat | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | O2 sensor heater, bank 1 post-cat | — | W52 | — | 0.5 | T8-C3-23 | — | — | — |
OEM-X60003
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Mass air flow (MAF) signal | — | W58 | — | 0.5 | T8-C2-10 | — | — | — |
| 10 | Throttle position sensor 2 | — | W61 | — | 0.5 | T8-C2-6 | — | — | — |
| 15 | Exhaust camshaft ground | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | MAF ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Intake camshaft ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Throttle position sensor 1 | — | W59 | — | 0.5 | T8-C2-1 | — | — | — |
| 2 | Exhaust camshaft position | — | W32 | — | 0.5 | T8-C2-22 | — | — | — |
| 20 | Throttle ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Crankshaft ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Intake air temperature (IAT) | — | W68 | — | 0.5 | T8-C2-25 | — | — | — |
| 23 | IAT ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Engine coolant temperature (ECT) | — | W67 | — | 0.5 | T8-C2-7 | — | — | — |
| 25 | ECT ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 27 | Engine oil temperature | — | W69 | — | 0.5 | T8-C2-17 | — | — | — |
| 28 | Oil temperature ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 29 | Knock sensor, cylinders 1-3 (A) | — | — | — | — | — | — | — | — |
| 30 | Knock sensor, cylinders 1-3 (B) | — | — | — | — | — | — | — | — |
| 31 | Knock sensor, cylinders 4-6 (A) | — | — | — | — | — | — | — | — |
| 32 | Knock sensor, cylinders 4-6 (B) | — | — | — | — | — | — | — | — |
| 33 | Injector cylinder 1 | — | W40 | — | 0.5 | T8-C1-9 | — | — | — |
| 34 | Injector cylinder 2 | — | W41 | — | 0.5 | T8-C1-17 | — | — | — |
| 35 | Injector cylinder 3 | — | W42 | — | 0.5 | T8-C1-34 | — | — | — |
| 36 | Injector cylinder 4 | — | W43 | — | 0.5 | T8-C1-25 | — | — | — |
| 37 | Injector cylinder 5 | — | W44 | — | 0.5 | T8-C1-16 | — | — | — |
| 38 | Injector cylinder 6 | — | W45 | — | 0.5 | T8-C1-15 | — | — | — |
| 40 | VANOS intake solenoid | — | W53 | — | 0.5 | T8-C3-24 | — | — | — |
| 41 | VANOS exhaust solenoid | — | W54 | — | 0.5 | T8-C3-25 | — | — | — |
| 42 | Evap purge valve | — | W55 | — | 0.5 | T8-C3-10 | — | — | — |
| 43 | Throttle motor drive 1 (H-bridge) | — | — | — | — | — | — | — | — |
| 44 | Throttle motor drive 2 (H-bridge) | — | — | — | — | — | — | — | — |
| 45 | Map-controlled thermostat | — | W56 | — | 0.5 | T8-C3-4 | — | — | — |
| 46 | Idle speed control, close | — | — | — | — | — | — | — | — |
| 47 | Idle speed control, open | — | — | — | — | — | — | — | — |
| 48 | Knock sensor shield | — | — | — | — | — | — | — | — |
| 49 | DISA intake flap | — | W57 | — | 0.5 | T8-C3-28 | — | — | — |
| 5 | Intake camshaft position | — | W33 | — | 0.5 | T8-C2-29 | — | — | — |
| 7 | Throttle body +5V supply | — | W27 | — | 0.5 | SP-5V1-1 | — | — | — |
| 8 | Crankshaft position | — | W31 | — | 0.5 | T8-C2-12 | — | — | — |
OEM-X60004
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Fuel pump relay control | — | W48 | — | 0.5 | T8-C1-3 | — | — | — |
| 12 | Pedal ground 2 | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | Pedal position signal 2 | — | W62 | — | 0.5 | T8-C2-18 | — | — | — |
| 14 | Pedal +5V supply 2 | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | Pedal ground 1 | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Pedal position signal 1 | — | W60 | — | 0.5 | T8-C2-5 | — | — | — |
| 9 | Pedal +5V supply 1 | — | W29 | — | 0.5 | SP-5V1-1 | — | — | — |
OEM-X60005
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil 3 | — | W36 | — | 0.5 | T8-C1-1 | — | — | — |
| 2 | Ignition coil 2 | — | W35 | — | 0.5 | T8-C1-18 | — | — | — |
| 3 | Ignition coil 1 | — | W34 | — | 0.5 | T8-C1-10 | — | — | — |
| 5 | Ignition ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Ignition coil 6 | — | W39 | — | 0.5 | T8-C1-27 | — | — | — |
| 8 | Ignition coil 5 | — | W38 | — | 0.5 | T8-C1-11 | — | — | — |
| 9 | Ignition coil 4 | — | W37 | — | 0.5 | T8-C1-26 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W11 | — | 0.5 | OEM-X60002-20 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-X60002-21 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-X60002-22 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-X60002-24 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-X60003-15 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-X60003-17 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-X60003-18 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X60003-20 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X60003-21 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X60003-23 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X60003-25 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-X60003-28 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-X60004-12 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-X60004-7 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | T8-C2-21 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | T8-C2-33 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X60001-8 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X60001-9 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | T8-C1-31 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W27 | — | 0.5 | OEM-X60003-7 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | OEM-X60004-14 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | OEM-X60004-9 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | T8-C2-24 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-X60001-4 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-X60001-5 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-X60001-6 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-X60005-5 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | T8-C1-13 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | T8-C1-14 | — | — | — |
T8-C1
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Coil 3 | — | W36 | — | 0.5 | OEM-X60005-1 | — | — | — |
| 2 | — | — | — | — | — | — | — | — | — |
| 3 | PWM 3 | — | W48 | — | 0.5 | OEM-X60004-10 | — | — | — |
| 4 | PWM 2 | — | W47 | — | 0.5 | OEM-X60002-23 | — | — | — |
| 5 | PWM 1 | — | W46 | — | 0.5 | OEM-X60001-1 | — | — | — |
| 6 | — | — | — | — | — | — | — | — | — |
| 7 | — | — | — | — | — | — | — | — | — |
| 8 | — | — | — | — | — | — | — | — | — |
| 9 | Injector 1 | — | W40 | — | 0.5 | OEM-X60003-33 | — | — | — |
| 10 | Coil 1 | — | W34 | — | 0.5 | OEM-X60005-3 | — | — | — |
| 11 | Coil 5 | — | W38 | — | 0.5 | OEM-X60005-8 | — | — | — |
| 12 | Coil 7 | — | — | — | — | — | — | — | — |
| 13 | Power Ground 1 | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 14 | Power Ground 2 | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 15 | Injector 6 | — | W45 | — | 0.5 | OEM-X60003-38 | — | — | — |
| 16 | Injector 5 | — | W44 | — | 0.5 | OEM-X60003-37 | — | — | — |
| 17 | Injector 2 | — | W41 | — | 0.5 | OEM-X60003-34 | — | — | — |
| 18 | Coil 2 | — | W35 | — | 0.5 | OEM-X60005-2 | — | — | — |
| 19 | Coil 8 | — | — | — | — | — | — | — | — |
| 20 | — | — | — | — | — | — | — | — | — |
| 21 | — | — | — | — | — | — | — | — | — |
| 22 | — | — | — | — | — | — | — | — | — |
| 23 | Injector 8 | — | — | — | — | — | — | — | — |
| 24 | Injector 7 | — | — | — | — | — | — | — | — |
| 25 | Injector 4 | — | W43 | — | 0.5 | OEM-X60003-36 | — | — | — |
| 26 | Coil 4 | — | W37 | — | 0.5 | OEM-X60005-9 | — | — | — |
| 27 | Coil 6 | — | W39 | — | 0.5 | OEM-X60005-7 | — | — | — |
| 28 | — | — | — | — | — | — | — | — | — |
| 29 | — | — | — | — | — | — | — | — | — |
| 30 | — | — | — | — | — | — | — | — | — |
| 31 | Ignition 12v In | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 32 | — | — | — | — | — | — | — | — | — |
| 33 | — | — | — | — | — | — | — | — | — |
| 34 | Injector 3 | — | W42 | — | 0.5 | OEM-X60003-35 | — | — | — |
T8-C2
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Analogue 2 | — | W59 | — | 0.5 | OEM-X60003-19 | — | — | — |
| 2 | Wheel 1 | — | — | — | — | — | — | — | — |
| 3 | Analogue 10 | — | — | — | — | — | — | — | — |
| 4 | Digital 1 | — | — | — | — | — | — | — | — |
| 5 | Analogue 3 | — | W60 | — | 0.5 | OEM-X60004-8 | — | — | — |
| 6 | Analogue 4 | — | W61 | — | 0.5 | OEM-X60003-10 | — | — | — |
| 7 | Thermistor 1 | — | W67 | — | 0.5 | OEM-X60003-24 | — | — | — |
| 8 | Digital 2 | — | — | — | — | — | — | — | — |
| 9 | 5v Output | — | — | — | — | — | — | — | — |
| 10 | Analogue 1 | — | W58 | — | 0.5 | OEM-X60003-1 | — | — | — |
| 11 | Digital 3 | — | — | — | — | — | — | — | — |
| 12 | Crank | — | W31 | — | 0.5 | OEM-X60003-8 | — | — | — |
| 13 | Analogue 12 | — | — | — | — | — | — | — | — |
| 14 | Digital 4 | — | — | — | — | — | — | — | — |
| 15 | Digital 5 | — | — | — | — | — | — | — | — |
| 16 | Analogue 11 | — | — | — | — | — | — | — | — |
| 17 | Thermistor 3 | — | W69 | — | 0.5 | OEM-X60003-27 | — | — | — |
| 18 | Analogue 5 | — | W62 | — | 0.5 | OEM-X60004-13 | — | — | — |
| 19 | Analogue 6 | — | W63 | — | 0.5 | OEM-X60002-14 | — | — | — |
| 20 | Wheel 2 | — | — | — | — | — | — | — | — |
| 21 | Sensor Ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Cam 1 | — | W32 | — | 0.5 | OEM-X60003-2 | — | — | — |
| 23 | — | — | — | — | — | — | — | — | — |
| 24 | 5v Output | — | W30 | — | 0.5 | SP-5V1-1 | — | — | — |
| 25 | Thermistor 2 | — | W68 | — | 0.5 | OEM-X60003-22 | — | — | — |
| 26 | CAN High | — | — | — | — | — | — | — | — |
| 27 | Digital 6 | — | — | — | — | — | — | — | — |
| 28 | CAN Low | — | — | — | — | — | — | — | — |
| 29 | Cam 2 | — | W33 | — | 0.5 | OEM-X60003-5 | — | — | — |
| 30 | — | — | — | — | — | — | — | — | — |
| 31 | Wheel 3 | — | — | — | — | — | — | — | — |
| 32 | Wheel 4 | — | — | — | — | — | — | — | — |
| 33 | Sensor Ground | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 34 | Analogue 9 | — | W66 | — | 0.5 | OEM-X60002-18 | — | — | — |
T8-C3
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Lambda 2 Pump Current | — | — | — | — | — | — | — | — |
| 2 | Lambda 2 VGND | — | — | — | — | — | — | — | — |
| 3 | Lambda 2 Heater Negative | — | W50 | — | 0.5 | OEM-X60002-13 | — | — | — |
| 4 | PWM 9 | — | W56 | — | 0.5 | OEM-X60003-45 | — | — | — |
| 5 | Lambda 2 Trim Resistor | — | — | — | — | — | — | — | — |
| 6 | Lambda 2 Nernst Voltage | — | — | — | — | — | — | — | — |
| 7 | Lambda 1 Pump Current | — | — | — | — | — | — | — | — |
| 8 | Lambda 1 VGND | — | — | — | — | — | — | — | — |
| 9 | Lambda 1 Heater Negative | — | W49 | — | 0.5 | OEM-X60002-1 | — | — | — |
| 10 | PWM 8 | — | W55 | — | 0.5 | OEM-X60003-42 | — | — | — |
| 11 | Lambda 1 Trim Resistor | — | — | — | — | — | — | — | — |
| 12 | Lambda 1 Nernst Voltage | — | — | — | — | — | — | — | — |
| 13 | — | — | — | — | — | — | — | — | — |
| 14 | — | — | — | — | — | — | — | — | — |
| 15 | — | — | — | — | — | — | — | — | — |
| 16 | — | — | — | — | — | — | — | — | — |
| 17 | Analogue 7 | — | W64 | — | 0.5 | OEM-X60002-15 | — | — | — |
| 18 | Analogue 8 | — | W65 | — | 0.5 | OEM-X60002-16 | — | — | — |
| 19 | — | — | — | — | — | — | — | — | — |
| 20 | — | — | — | — | — | — | — | — | — |
| 21 | — | — | — | — | — | — | — | — | — |
| 22 | PWM 4 | — | W51 | — | 0.5 | OEM-X60002-19 | — | — | — |
| 23 | PWM 5 | — | W52 | — | 0.5 | OEM-X60002-7 | — | — | — |
| 24 | PWM 6 | — | W53 | — | 0.5 | OEM-X60003-40 | — | — | — |
| 25 | PWM 7 | — | W54 | — | 0.5 | OEM-X60003-41 | — | — | — |
| 26 | Permanent 12v | — | W4 | — | 0.85 | OEM-X60001-7 | — | — | — |
| 27 | Permanent 12v | — | — | — | — | — | — | — | — |
| 28 | PWM 10 | — | W57 | — | 0.5 | OEM-X60003-49 | — | — | — |
| 29 | — | — | — | — | — | — | — | — | — |
| 30 | — | — | — | — | — | — | — | — | — |
| 31 | — | — | — | — | — | — | — | — | — |
| 32 | — | — | — | — | — | — | — | — | — |
| 33 | CAN 2 High | — | — | — | — | — | — | — | — |
| 34 | CAN 2 Low | — | — | — | — | — | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X60001-1 | Injector/unloader relay control (terminal 15) | low_side_out | T8-C1-5 | PWM 1 | low_side_out | corroborated | |
| OEM-X60001-4 | Power ground | ground | T8-C1-13 + T8-C1-14 | Power Ground 1 + Power Ground 2 | ground | corroborated | |
| OEM-X60001-5 | Power ground | ground | T8-C1-13 + T8-C1-14 | Power Ground 1 + Power Ground 2 | ground | corroborated | |
| OEM-X60001-6 | Power ground | ground | T8-C1-13 + T8-C1-14 | Power Ground 1 + Power Ground 2 | ground | corroborated | |
| OEM-X60001-7 | Battery constant (terminal 30) | power_in | T8-C3-26 | Permanent 12v | power_in | corroborated | |
| OEM-X60001-8 | ECU main power (terminal 87 via main relay) | power_in | T8-C1-31 | Ignition 12v In | power_in | corroborated | |
| OEM-X60001-9 | Voltage supply (injector / fuse carrier) | power_in | T8-C1-31 | Ignition 12v In | power_in | corroborated | |
| OEM-X60002-1 | O2 sensor heater, bank 1 pre-cat | low_side_out | T8-C3-9 | Lambda 1 Heater Negative | low_side_out | corroborated | |
| OEM-X60002-13 | O2 sensor heater, bank 2 pre-cat | low_side_out | T8-C3-3 | Lambda 2 Heater Negative | low_side_out | corroborated | |
| OEM-X60002-14 | O2 sensor signal, bank 1 pre-cat | lambda_nb_in | T8-C2-19 | Analogue 6 | analog_in | corroborated | |
| OEM-X60002-15 | O2 sensor signal, bank 2 pre-cat | lambda_nb_in | T8-C3-17 | Analogue 7 | analog_in | corroborated | |
| OEM-X60002-16 | O2 sensor signal, bank 1 post-cat | lambda_nb_in | T8-C3-18 | Analogue 8 | analog_in | corroborated | |
| OEM-X60002-18 | O2 sensor signal, bank 2 post-cat | lambda_nb_in | T8-C2-34 | Analogue 9 | analog_in | corroborated | |
| OEM-X60002-19 | O2 sensor heater, bank 2 post-cat | low_side_out | T8-C3-22 | PWM 4 | low_side_out | corroborated | |
| OEM-X60002-20 | O2 sensor ground, bank 1 pre-cat | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-21 | O2 sensor ground, bank 2 pre-cat | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-22 | O2 sensor ground, bank 1 post-cat | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-23 | Main relay control | low_side_out | T8-C1-4 | PWM 2 | low_side_out | corroborated | |
| OEM-X60002-24 | O2 sensor ground, bank 2 post-cat | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-7 | O2 sensor heater, bank 1 post-cat | low_side_out | T8-C3-23 | PWM 5 | low_side_out | corroborated | |
| OEM-X60003-1 | Mass air flow (MAF) signal | analog_in | T8-C2-10 | Analogue 1 | analog_in | corroborated | |
| OEM-X60003-10 | Throttle position sensor 2 | analog_in | T8-C2-6 | Analogue 4 | analog_in | corroborated | |
| OEM-X60003-15 | Exhaust camshaft ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-17 | MAF ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-18 | Intake camshaft ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-19 | Throttle position sensor 1 | analog_in | T8-C2-1 | Analogue 2 | analog_in | corroborated | |
| OEM-X60003-2 | Exhaust camshaft position | trigger_in | T8-C2-22 | Cam 1 | trigger_in | corroborated | |
| OEM-X60003-20 | Throttle ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-21 | Crankshaft ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-22 | Intake air temperature (IAT) | temp_in | T8-C2-25 | Thermistor 2 | temp_in | corroborated | |
| OEM-X60003-23 | IAT ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-24 | Engine coolant temperature (ECT) | temp_in | T8-C2-7 | Thermistor 1 | temp_in | corroborated | |
| OEM-X60003-25 | ECT ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-27 | Engine oil temperature | temp_in | T8-C2-17 | Thermistor 3 | temp_in | corroborated | |
| OEM-X60003-28 | Oil temperature ground | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-29 | Knock sensor, cylinders 1-3 (A) | knock_in | — | — | — | corroborated | |
| OEM-X60003-30 | Knock sensor, cylinders 1-3 (B) | knock_in | — | — | — | corroborated | |
| OEM-X60003-31 | Knock sensor, cylinders 4-6 (A) | knock_in | — | — | — | corroborated | |
| OEM-X60003-32 | Knock sensor, cylinders 4-6 (B) | knock_in | — | — | — | corroborated | |
| OEM-X60003-33 | Injector cylinder 1 | injector_out | T8-C1-9 | Injector 1 | injector_out | corroborated | |
| OEM-X60003-34 | Injector cylinder 2 | injector_out | T8-C1-17 | Injector 2 | injector_out | corroborated | |
| OEM-X60003-35 | Injector cylinder 3 | injector_out | T8-C1-34 | Injector 3 | injector_out | corroborated | |
| OEM-X60003-36 | Injector cylinder 4 | injector_out | T8-C1-25 | Injector 4 | injector_out | corroborated | |
| OEM-X60003-37 | Injector cylinder 5 | injector_out | T8-C1-16 | Injector 5 | injector_out | corroborated | |
| OEM-X60003-38 | Injector cylinder 6 | injector_out | T8-C1-15 | Injector 6 | injector_out | corroborated | |
| OEM-X60003-40 | VANOS intake solenoid | low_side_out | T8-C3-24 | PWM 6 | low_side_out | corroborated | |
| OEM-X60003-41 | VANOS exhaust solenoid | low_side_out | T8-C3-25 | PWM 7 | low_side_out | corroborated | |
| OEM-X60003-42 | Evap purge valve | low_side_out | T8-C3-10 | PWM 8 | low_side_out | corroborated | |
| OEM-X60003-43 | Throttle motor drive 1 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-44 | Throttle motor drive 2 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-45 | Map-controlled thermostat | low_side_out | T8-C3-4 | PWM 9 | low_side_out | corroborated | |
| OEM-X60003-46 | Idle speed control, close | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-47 | Idle speed control, open | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-48 | Knock sensor shield | shield | — | — | — | corroborated | |
| OEM-X60003-49 | DISA intake flap | low_side_out | T8-C3-28 | PWM 10 | low_side_out | corroborated | |
| OEM-X60003-5 | Intake camshaft position | trigger_in | T8-C2-29 | Cam 2 | trigger_in | corroborated | |
| OEM-X60003-7 | Throttle body +5V supply | vref | T8-C2-24 | 5v Output | vref | corroborated | |
| OEM-X60003-8 | Crankshaft position | trigger_in | T8-C2-12 | Crank | trigger_in | corroborated | |
| OEM-X60004-10 | Fuel pump relay control | low_side_out | T8-C1-3 | PWM 3 | low_side_out | corroborated | |
| OEM-X60004-12 | Pedal ground 2 | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-13 | Pedal position signal 2 | analog_in | T8-C2-18 | Analogue 5 | analog_in | corroborated | |
| OEM-X60004-14 | Pedal +5V supply 2 | vref | T8-C2-24 | 5v Output | vref | corroborated | |
| OEM-X60004-7 | Pedal ground 1 | sensor_ground | T8-C2-21 + T8-C2-33 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-8 | Pedal position signal 1 | analog_in | T8-C2-5 | Analogue 3 | analog_in | corroborated | |
| OEM-X60004-9 | Pedal +5V supply 1 | vref | T8-C2-24 | 5v Output | vref | corroborated | |
| OEM-X60005-1 | Ignition coil 3 | ignition_out | T8-C1-1 | Coil 3 | ignition_out | corroborated | |
| OEM-X60005-2 | Ignition coil 2 | ignition_out | T8-C1-18 | Coil 2 | ignition_out | corroborated | |
| OEM-X60005-3 | Ignition coil 1 | ignition_out | T8-C1-10 | Coil 1 | ignition_out | corroborated | |
| OEM-X60005-5 | Ignition ground | ground | T8-C1-13 + T8-C1-14 | Power Ground 1 + Power Ground 2 | ground | corroborated | |
| OEM-X60005-7 | Ignition coil 6 | ignition_out | T8-C1-27 | Coil 6 | ignition_out | corroborated | |
| OEM-X60005-8 | Ignition coil 5 | ignition_out | T8-C1-11 | Coil 5 | ignition_out | corroborated | |
| OEM-X60005-9 | Ignition coil 4 | ignition_out | T8-C1-26 | Coil 4 | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | no route | ECU main power (terminal 87 via main relay) | — | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | no route | Voltage supply (injector / fuse carrier) | — | |
| W3 | SP-14V-1 | T8-C1-31 | 0.85 | no route | Ignition 12v In | — | |
| W4 | OEM-X60001-7 | T8-C3-26 | 0.85 | no route | Battery constant (terminal 30) | — | |
| W5 | OEM-X60001-4 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-X60001-5 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | OEM-X60001-6 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W8 | OEM-X60005-5 | SP-GND-1 | 0.85 | no route | Ignition ground | — | |
| W9 | SP-GND-1 | T8-C1-13 | 0.85 | no route | Power Ground 1 | — | |
| W10 | SP-GND-1 | T8-C1-14 | 0.85 | no route | Power Ground 2 | — | |
| W11 | OEM-X60002-20 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 pre-cat | — | |
| W12 | OEM-X60002-21 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 pre-cat | — | |
| W13 | OEM-X60002-22 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 post-cat | — | |
| W14 | OEM-X60002-24 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 post-cat | — | |
| W15 | OEM-X60003-15 | SP-0V-1 | 0.5 | no route | Exhaust camshaft ground | — | |
| W16 | OEM-X60003-17 | SP-0V-1 | 0.5 | no route | MAF ground | — | |
| W17 | OEM-X60003-18 | SP-0V-1 | 0.5 | no route | Intake camshaft ground | — | |
| W18 | OEM-X60003-20 | SP-0V-1 | 0.5 | no route | Throttle ground | — | |
| W19 | OEM-X60003-21 | SP-0V-1 | 0.5 | no route | Crankshaft ground | — | |
| W20 | OEM-X60003-23 | SP-0V-1 | 0.5 | no route | IAT ground | — | |
| W21 | OEM-X60003-25 | SP-0V-1 | 0.5 | no route | ECT ground | — | |
| W22 | OEM-X60003-28 | SP-0V-1 | 0.5 | no route | Oil temperature ground | — | |
| W23 | OEM-X60004-12 | SP-0V-1 | 0.5 | no route | Pedal ground 2 | — | |
| W24 | OEM-X60004-7 | SP-0V-1 | 0.5 | no route | Pedal ground 1 | — | |
| W25 | SP-0V-1 | T8-C2-21 | 0.5 | no route | Sensor Ground | — | |
| W26 | SP-0V-1 | T8-C2-33 | 0.5 | no route | Sensor Ground | — | |
| W27 | OEM-X60003-7 | SP-5V1-1 | 0.5 | no route | Throttle body +5V supply | — | |
| W28 | OEM-X60004-14 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 2 | — | |
| W29 | OEM-X60004-9 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 1 | — | |
| W30 | SP-5V1-1 | T8-C2-24 | 0.5 | no route | 5v Output | — | |
| W31 | OEM-X60003-8 | T8-C2-12 | 0.5 | no route | Crankshaft position | — | |
| W32 | OEM-X60003-2 | T8-C2-22 | 0.5 | no route | Exhaust camshaft position | — | |
| W33 | OEM-X60003-5 | T8-C2-29 | 0.5 | no route | Intake camshaft position | — | |
| W34 | OEM-X60005-3 | T8-C1-10 | 0.5 | no route | Ignition coil 1 | — | |
| W35 | OEM-X60005-2 | T8-C1-18 | 0.5 | no route | Ignition coil 2 | — | |
| W36 | OEM-X60005-1 | T8-C1-1 | 0.5 | no route | Ignition coil 3 | — | |
| W37 | OEM-X60005-9 | T8-C1-26 | 0.5 | no route | Ignition coil 4 | — | |
| W38 | OEM-X60005-8 | T8-C1-11 | 0.5 | no route | Ignition coil 5 | — | |
| W39 | OEM-X60005-7 | T8-C1-27 | 0.5 | no route | Ignition coil 6 | — | |
| W40 | OEM-X60003-33 | T8-C1-9 | 0.5 | no route | Injector cylinder 1 | — | |
| W41 | OEM-X60003-34 | T8-C1-17 | 0.5 | no route | Injector cylinder 2 | — | |
| W42 | OEM-X60003-35 | T8-C1-34 | 0.5 | no route | Injector cylinder 3 | — | |
| W43 | OEM-X60003-36 | T8-C1-25 | 0.5 | no route | Injector cylinder 4 | — | |
| W44 | OEM-X60003-37 | T8-C1-16 | 0.5 | no route | Injector cylinder 5 | — | |
| W45 | OEM-X60003-38 | T8-C1-15 | 0.5 | no route | Injector cylinder 6 | — | |
| W46 | OEM-X60001-1 | T8-C1-5 | 0.5 | no route | Injector/unloader relay control (terminal 15) | — | |
| W47 | OEM-X60002-23 | T8-C1-4 | 0.5 | no route | Main relay control | — | |
| W48 | OEM-X60004-10 | T8-C1-3 | 0.5 | no route | Fuel pump relay control | — | |
| W49 | OEM-X60002-1 | T8-C3-9 | 0.5 | no route | O2 sensor heater, bank 1 pre-cat | — | |
| W50 | OEM-X60002-13 | T8-C3-3 | 0.5 | no route | O2 sensor heater, bank 2 pre-cat | — | |
| W51 | OEM-X60002-19 | T8-C3-22 | 0.5 | no route | O2 sensor heater, bank 2 post-cat | — | |
| W52 | OEM-X60002-7 | T8-C3-23 | 0.5 | no route | O2 sensor heater, bank 1 post-cat | — | |
| W53 | OEM-X60003-40 | T8-C3-24 | 0.5 | no route | VANOS intake solenoid | — | |
| W54 | OEM-X60003-41 | T8-C3-25 | 0.5 | no route | VANOS exhaust solenoid | — | |
| W55 | OEM-X60003-42 | T8-C3-10 | 0.5 | no route | Evap purge valve | — | |
| W56 | OEM-X60003-45 | T8-C3-4 | 0.5 | no route | Map-controlled thermostat | — | |
| W57 | OEM-X60003-49 | T8-C3-28 | 0.5 | no route | DISA intake flap | — | |
| W58 | OEM-X60003-1 | T8-C2-10 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W59 | OEM-X60003-19 | T8-C2-1 | 0.5 | no route | Throttle position sensor 1 | — | |
| W60 | OEM-X60004-8 | T8-C2-5 | 0.5 | no route | Pedal position signal 1 | — | |
| W61 | OEM-X60003-10 | T8-C2-6 | 0.5 | no route | Throttle position sensor 2 | — | |
| W62 | OEM-X60004-13 | T8-C2-18 | 0.5 | no route | Pedal position signal 2 | — | |
| W63 | OEM-X60002-14 | T8-C2-19 | 0.5 | no route | O2 sensor signal, bank 1 pre-cat | — | |
| W64 | OEM-X60002-15 | T8-C3-17 | 0.5 | no route | O2 sensor signal, bank 2 pre-cat | — | |
| W65 | OEM-X60002-16 | T8-C3-18 | 0.5 | no route | O2 sensor signal, bank 1 post-cat | — | |
| W66 | OEM-X60002-18 | T8-C2-34 | 0.5 | no route | O2 sensor signal, bank 2 post-cat | — | |
| W67 | OEM-X60003-24 | T8-C2-7 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W68 | OEM-X60003-22 | T8-C2-25 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W69 | OEM-X60003-27 | T8-C2-17 | 0.5 | no route | Engine oil temperature | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 3.000 | ea |
| connector | BMW-E46-MS43-CONN | BMW | E46 DME (MS43) harness connector | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 46.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (7)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | PHYS_REQUIRED_OPEN | T8-C3-27 | T8-C3-27 "Permanent 12v" is required but not wired. |
| error | REQUIRED_UNMAPPED | OEM-X60003-43 | Required OEM function "Throttle motor drive 1 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60003-44 | Required OEM function "Throttle motor drive 2 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| warn | DATASET_GAP | T8 C1 | 12 of 34 cavities on T8 C1 have no pin data (2,6,7,8,20,21,22,28,29,30,32,33). Anything there is invisible to these checks. |
| warn | DATASET_GAP | T8 C2 | 2 of 34 cavities on T8 C2 have no pin data (23,30). Anything there is invisible to these checks. |
| warn | DATASET_GAP | T8 C3 | 11 of 34 cavities on T8 C3 have no pin data (13,14,15,16,19,20,21,29,30,31,32). Anything there is invisible to these checks. |
| info | UNMAPPED | OEM | 7 optional OEM pins are not mapped: OEM-X60003-29 Knock sensor, cylinders 1-3 (A); OEM-X60003-30 Knock sensor, cylinders 1-3 (B); OEM-X60003-31 Knock sensor, cylinders 4-6 (A); OEM-X60003-32 Knock sensor, cylinders 4-6 (B); OEM-X60003-46 Idle speed control, close; OEM-X60003-47 Idle speed control, open; OEM-X60003-48 Knock sensor shield |
Accepted (0)
| Code | Subject | Reason | By |
|---|
Notes
Fit check: needs add-on. Resolve these before building: - No drive-by-wire; needs a cable-throttle conversion or an external DBW controller - Needs CAN (E46 K-bus/CAN); not documented for this ECU - No knock input; the stock knock sensor would be unused - This car has EWS 3.3 (rolling code) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-X60003 43: Throttle motor drive 1 (H-bridge): no free hbridge on DTAFast T8 - OEM-X60003 44: Throttle motor drive 2 (H-bridge): no free hbridge on DTAFast T8 - T8-C3 27: Permanent 12v: required by DTAFast T8 but no stock pin feeds it; wire by hand Not wired: - OEM-X60003 29: Knock sensor, cylinders 1-3 (A): no free knock input on DTAFast T8 - OEM-X60003 30: Knock sensor, cylinders 1-3 (B): no free knock input on DTAFast T8 - OEM-X60003 31: Knock sensor, cylinders 4-6 (A): no free knock input on DTAFast T8 - OEM-X60003 32: Knock sensor, cylinders 4-6 (B): no free knock input on DTAFast T8 - OEM-X60003 48: Knock sensor shield: no shield pin on DTAFast T8 - OEM-X60003 46: Idle speed control, close: no free hbridge on DTAFast T8 - OEM-X60003 47: Idle speed control, open: no free hbridge on DTAFast T8
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | DTAFast T8 ECU wiring diagram | https://cdn.shopify.com/s/files/1/0848/7508/4108/files/T8_Wiring-Diagram.pdf?v=1728571343 | — | — | — |
| 2 | community_copy | ms4x.net: Siemens MS43 Pinout | https://www.ms4x.net/index.php?title=Siemens_MS43_Pinout | — | — | — |
| 2 | community_copy | rusefi wiki: 2002 BMW 325 / 2004 BMW 330Ci E46 DME pinout (M54/MS43) | https://github.com/rusefi/rusefi/wiki/2002-BMW-325-and-2004-BMW-330Ci-E46-DME-pinout | — | — | — |