BMW 3 Series E46 1998–2006 (M54) → MoTeC M800 universal (auto)
BMW 3 Series E46 1998–2006 (M54) — MoTeC — M800
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 3: read the Findings page before cutting any wire |
| Size of the job | 65 wires · 11 connectors · 4 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | M800-A-26 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-X60001-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-X60001-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-X60001-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-X60005-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | M800-A-10 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | M800-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-X60002-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-X60002-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-X60002-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-X60002-24 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-X60003-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-X60003-17 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X60003-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X60003-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X60003-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X60003-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X60003-25 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X60003-28 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X60004-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X60004-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | M800-B-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | M800-B-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | M800-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-X60003-7 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-X60004-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-X60004-9 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-5V1-1 | M800-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-X60003-8 | M800-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X60003-2 | M800-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X60005-3 | M800-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X60005-2 | M800-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X60005-1 | M800-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X60005-9 | M800-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X60005-8 | M800-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X60005-7 | M800-A-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X60003-33 | M800-A-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X60003-34 | M800-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X60003-35 | M800-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X60003-36 | M800-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X60003-37 | M800-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X60003-38 | M800-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X60001-1 | M800-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X60002-23 | M800-A-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X60004-10 | M800-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X60002-1 | M800-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X60002-13 | M800-A-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X60002-19 | M800-A-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-X60002-7 | M800-A-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X60003-40 | M800-A-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-X60003-41 | M800-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X60003-42 | M800-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X60003-1 | M800-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X60003-19 | M800-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X60004-8 | M800-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X60003-10 | M800-A-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X60004-13 | M800-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X60002-14 | M800-B-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X60002-15 | M800-B-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-X60002-16 | M800-B-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-X60003-24 | M800-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-X60003-22 | M800-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-X60003-27 | M800-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | M800-A-26 | M800-B-14 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | M800-A-10 | M800-A-2 | open (OL) | power ground must not touch 5 V sensor reference | |
| 3 | M800-A-10 | M800-A-26 | open (OL) | power ground must not touch +12 V supply | |
| 4 | M800-A-26 | M800-A-2 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 5 | M800-B-14 | M800-A-2 | open (OL) | sensor ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
M800-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | AUX2 | — | W46 | — | 0.5 | OEM-X60002-23 | — | — | — |
| 2 | 5V Engine Sensor Supply | — | W30 | — | 0.5 | SP-5V1-1 | — | — | — |
| 3 | IGN1 | — | W33 | — | 0.5 | OEM-X60005-3 | — | — | — |
| 4 | IGN2 | — | W34 | — | 0.5 | OEM-X60005-2 | — | — | — |
| 5 | IGN3 | — | W35 | — | 0.5 | OEM-X60005-1 | — | — | — |
| 6 | IGN4 | — | W36 | — | 0.5 | OEM-X60005-9 | — | — | — |
| 7 | IGN5 | — | W37 | — | 0.5 | OEM-X60005-8 | — | — | — |
| 8 | IGN6 | — | W38 | — | 0.5 | OEM-X60005-7 | — | — | — |
| 9 | 5V Auxiliary Sensor Supply | — | — | — | — | — | — | — | — |
| 10 | GND Battery Negative | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | GND Battery Negative | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | 8V Engine Sensor Supply | — | — | — | — | — | — | — | — |
| 13 | 8V Auxiliary Sensor and CAN Supply | — | — | — | — | — | — | — | — |
| 14 | AV1 | — | W55 | — | 0.5 | OEM-X60003-1 | — | — | — |
| 15 | Analog Voltage Input 2 | — | W56 | — | 0.5 | OEM-X60003-19 | — | — | — |
| 16 | Analog Voltage Input 3 | — | W57 | — | 0.5 | OEM-X60004-8 | — | — | — |
| 17 | Analog Voltage Input 4 | — | W58 | — | 0.5 | OEM-X60003-10 | — | — | — |
| 18 | AUX1 | — | W45 | — | 0.5 | OEM-X60001-1 | — | — | — |
| 19 | INJ1 | — | W39 | — | 0.5 | OEM-X60003-33 | — | — | — |
| 20 | INJ2 | — | W40 | — | 0.5 | OEM-X60003-34 | — | — | — |
| 21 | INJ3 | — | W41 | — | 0.5 | OEM-X60003-35 | — | — | — |
| 22 | INJ4 | — | W42 | — | 0.5 | OEM-X60003-36 | — | — | — |
| 23 | AUX3 | — | W47 | — | 0.5 | OEM-X60004-10 | — | — | — |
| 24 | AUX4 | — | W48 | — | 0.5 | OEM-X60002-1 | — | — | — |
| 25 | Analog Voltage Input 5 | — | W59 | — | 0.5 | OEM-X60004-13 | — | — | — |
| 26 | VBAT Battery Positive | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 27 | INJ5 | — | W43 | — | 0.5 | OEM-X60003-37 | — | — | — |
| 28 | INJ6 | — | W44 | — | 0.5 | OEM-X60003-38 | — | — | — |
| 29 | INJ7 | — | W53 | — | 0.5 | OEM-X60003-41 | — | — | — |
| 30 | INJ8 | — | W54 | — | 0.5 | OEM-X60003-42 | — | — | — |
| 31 | AUX5 | — | W49 | — | 0.5 | OEM-X60002-13 | — | — | — |
| 32 | AUX6 | — | W50 | — | 0.5 | OEM-X60002-19 | — | — | — |
| 33 | AUX7 | — | W51 | — | 0.5 | OEM-X60002-7 | — | — | — |
| 34 | AUX8 | — | W52 | — | 0.5 | OEM-X60003-40 | — | — | — |
M800-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Crank Reference Timing Input | — | W31 | — | 0.5 | OEM-X60003-8 | — | — | — |
| 2 | Cam Sync Timing Input | — | W32 | — | 0.5 | OEM-X60003-2 | — | — | — |
| 3 | Analog Temperature Input 1 | — | W63 | — | 0.5 | OEM-X60003-24 | — | — | — |
| 4 | Analog Temperature Input 2 | — | W64 | — | 0.5 | OEM-X60003-22 | — | — | — |
| 5 | Analog Temperature Input 3 | — | W65 | — | 0.5 | OEM-X60003-27 | — | — | — |
| 6 | Analog Temperature Input 4 | — | — | — | — | — | — | — | — |
| 7 | Analog Temperature Input 5 | — | — | — | — | — | — | — | — |
| 8 | Digital Input 1 | — | — | — | — | — | — | — | — |
| 9 | Digital Input 2 | — | — | — | — | — | — | — | — |
| 10 | Digital Input 3 | — | — | — | — | — | — | — | — |
| 11 | Digital Input 4 | — | — | — | — | — | — | — | — |
| 12 | Lambda2 Sense Voltage | — | — | — | — | — | — | — | — |
| 13 | Lambda2 Pump Current | — | — | — | — | — | — | — | — |
| 14 | 0V Comms Reference | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | 0V Auxiliary Sensor Supply | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | 0V Engine Sensor Supply | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | RS232 Transmit Data | — | — | — | — | — | — | — | — |
| 18 | RS232 Receive Data | — | — | — | — | — | — | — | — |
| 19 | Analog Temperature Input 6 | — | — | — | — | — | — | — | — |
| 20 | Analog Voltage Input 6 | — | W60 | — | 0.5 | OEM-X60002-14 | — | — | — |
| 21 | AV7 | — | W61 | — | 0.5 | OEM-X60002-15 | — | — | — |
| 22 | AV8 | — | W62 | — | 0.5 | OEM-X60002-16 | — | — | — |
| 23 | CAN Bus High | — | — | — | — | — | — | — | — |
| 24 | CAN Bus Low | — | — | — | — | — | — | — | — |
| 25 | Lambda1 Sense Voltage | — | — | — | — | — | — | — | — |
| 26 | Lambda1 Pump Current | — | — | — | — | — | — | — | — |
OEM-X60001
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector/unloader relay control (terminal 15) | — | W45 | — | 0.5 | M800-A-18 | — | — | — |
| 4 | Power ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Battery constant (terminal 30) | — | — | — | — | — | — | — | — |
| 8 | ECU main power (terminal 87 via main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Voltage supply (injector / fuse carrier) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
OEM-X60002
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | O2 sensor heater, bank 1 pre-cat | — | W48 | — | 0.5 | M800-A-24 | — | — | — |
| 13 | O2 sensor heater, bank 2 pre-cat | — | W49 | — | 0.5 | M800-A-31 | — | — | — |
| 14 | O2 sensor signal, bank 1 pre-cat | — | W60 | — | 0.5 | M800-B-20 | — | — | — |
| 15 | O2 sensor signal, bank 2 pre-cat | — | W61 | — | 0.5 | M800-B-21 | — | — | — |
| 16 | O2 sensor signal, bank 1 post-cat | — | W62 | — | 0.5 | M800-B-22 | — | — | — |
| 18 | O2 sensor signal, bank 2 post-cat | — | — | — | — | — | — | — | — |
| 19 | O2 sensor heater, bank 2 post-cat | — | W50 | — | 0.5 | M800-A-32 | — | — | — |
| 20 | O2 sensor ground, bank 1 pre-cat | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | O2 sensor ground, bank 2 pre-cat | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | O2 sensor ground, bank 1 post-cat | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Main relay control | — | W46 | — | 0.5 | M800-A-1 | — | — | — |
| 24 | O2 sensor ground, bank 2 post-cat | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | O2 sensor heater, bank 1 post-cat | — | W51 | — | 0.5 | M800-A-33 | — | — | — |
OEM-X60003
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Mass air flow (MAF) signal | — | W55 | — | 0.5 | M800-A-14 | — | — | — |
| 10 | Throttle position sensor 2 | — | W58 | — | 0.5 | M800-A-17 | — | — | — |
| 15 | Exhaust camshaft ground | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | MAF ground | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Intake camshaft ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Throttle position sensor 1 | — | W56 | — | 0.5 | M800-A-15 | — | — | — |
| 2 | Exhaust camshaft position | — | W32 | — | 0.5 | M800-B-2 | — | — | — |
| 20 | Throttle ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Crankshaft ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Intake air temperature (IAT) | — | W64 | — | 0.5 | M800-B-4 | — | — | — |
| 23 | IAT ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Engine coolant temperature (ECT) | — | W63 | — | 0.5 | M800-B-3 | — | — | — |
| 25 | ECT ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 27 | Engine oil temperature | — | W65 | — | 0.5 | M800-B-5 | — | — | — |
| 28 | Oil temperature ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 29 | Knock sensor, cylinders 1-3 (A) | — | — | — | — | — | — | — | — |
| 30 | Knock sensor, cylinders 1-3 (B) | — | — | — | — | — | — | — | — |
| 31 | Knock sensor, cylinders 4-6 (A) | — | — | — | — | — | — | — | — |
| 32 | Knock sensor, cylinders 4-6 (B) | — | — | — | — | — | — | — | — |
| 33 | Injector cylinder 1 | — | W39 | — | 0.5 | M800-A-19 | — | — | — |
| 34 | Injector cylinder 2 | — | W40 | — | 0.5 | M800-A-20 | — | — | — |
| 35 | Injector cylinder 3 | — | W41 | — | 0.5 | M800-A-21 | — | — | — |
| 36 | Injector cylinder 4 | — | W42 | — | 0.5 | M800-A-22 | — | — | — |
| 37 | Injector cylinder 5 | — | W43 | — | 0.5 | M800-A-27 | — | — | — |
| 38 | Injector cylinder 6 | — | W44 | — | 0.5 | M800-A-28 | — | — | — |
| 40 | VANOS intake solenoid | — | W52 | — | 0.5 | M800-A-34 | — | — | — |
| 41 | VANOS exhaust solenoid | — | W53 | — | 0.5 | M800-A-29 | — | — | — |
| 42 | Evap purge valve | — | W54 | — | 0.5 | M800-A-30 | — | — | — |
| 43 | Throttle motor drive 1 (H-bridge) | — | — | — | — | — | — | — | — |
| 44 | Throttle motor drive 2 (H-bridge) | — | — | — | — | — | — | — | — |
| 45 | Map-controlled thermostat | — | — | — | — | — | — | — | — |
| 46 | Idle speed control, close | — | — | — | — | — | — | — | — |
| 47 | Idle speed control, open | — | — | — | — | — | — | — | — |
| 48 | Knock sensor shield | — | — | — | — | — | — | — | — |
| 49 | DISA intake flap | — | — | — | — | — | — | — | — |
| 5 | Intake camshaft position | — | — | — | — | — | — | — | — |
| 7 | Throttle body +5V supply | — | W27 | — | 0.5 | SP-5V1-1 | — | — | — |
| 8 | Crankshaft position | — | W31 | — | 0.5 | M800-B-1 | — | — | — |
OEM-X60004
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Fuel pump relay control | — | W47 | — | 0.5 | M800-A-23 | — | — | — |
| 12 | Pedal ground 2 | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | Pedal position signal 2 | — | W59 | — | 0.5 | M800-A-25 | — | — | — |
| 14 | Pedal +5V supply 2 | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | Pedal ground 1 | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Pedal position signal 1 | — | W57 | — | 0.5 | M800-A-16 | — | — | — |
| 9 | Pedal +5V supply 1 | — | W29 | — | 0.5 | SP-5V1-1 | — | — | — |
OEM-X60005
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil 3 | — | W35 | — | 0.5 | M800-A-5 | — | — | — |
| 2 | Ignition coil 2 | — | W34 | — | 0.5 | M800-A-4 | — | — | — |
| 3 | Ignition coil 1 | — | W33 | — | 0.5 | M800-A-3 | — | — | — |
| 5 | Ignition ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Ignition coil 6 | — | W38 | — | 0.5 | M800-A-8 | — | — | — |
| 8 | Ignition coil 5 | — | W37 | — | 0.5 | M800-A-7 | — | — | — |
| 9 | Ignition coil 4 | — | W36 | — | 0.5 | M800-A-6 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.5 | OEM-X60002-20 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-X60002-21 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-X60002-22 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-X60002-24 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-X60003-15 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-X60003-17 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-X60003-18 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-X60003-20 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X60003-21 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X60003-23 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X60003-25 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X60003-28 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-X60004-12 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-X60004-7 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | M800-B-14 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | M800-B-15 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | M800-B-16 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X60001-8 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X60001-9 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | M800-A-26 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W27 | — | 0.5 | OEM-X60003-7 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | OEM-X60004-14 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | OEM-X60004-9 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | M800-A-2 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-X60001-4 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-X60001-5 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-X60001-6 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-X60005-5 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | M800-A-10 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | M800-A-11 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X60001-1 | Injector/unloader relay control (terminal 15) | low_side_out | M800-A-18 | AUX1 | switch_out | corroborated | |
| OEM-X60001-4 | Power ground | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | corroborated | |
| OEM-X60001-5 | Power ground | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | corroborated | |
| OEM-X60001-6 | Power ground | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | corroborated | |
| OEM-X60001-7 | Battery constant (terminal 30) | power_in | — | — | — | corroborated | |
| OEM-X60001-8 | ECU main power (terminal 87 via main relay) | power_in | M800-A-26 | VBAT Battery Positive | power_in | corroborated | |
| OEM-X60001-9 | Voltage supply (injector / fuse carrier) | power_in | M800-A-26 | VBAT Battery Positive | power_in | corroborated | |
| OEM-X60002-1 | O2 sensor heater, bank 1 pre-cat | low_side_out | M800-A-24 | AUX4 | switch_out | corroborated | |
| OEM-X60002-13 | O2 sensor heater, bank 2 pre-cat | low_side_out | M800-A-31 | AUX5 | switch_out | corroborated | |
| OEM-X60002-14 | O2 sensor signal, bank 1 pre-cat | lambda_nb_in | M800-B-20 | Analog Voltage Input 6 | analog_in | corroborated | |
| OEM-X60002-15 | O2 sensor signal, bank 2 pre-cat | lambda_nb_in | M800-B-21 | AV7 | analog_in | corroborated | |
| OEM-X60002-16 | O2 sensor signal, bank 1 post-cat | lambda_nb_in | M800-B-22 | AV8 | analog_in | corroborated | |
| OEM-X60002-18 | O2 sensor signal, bank 2 post-cat | lambda_nb_in | — | — | — | corroborated | |
| OEM-X60002-19 | O2 sensor heater, bank 2 post-cat | low_side_out | M800-A-32 | AUX6 | switch_out | corroborated | |
| OEM-X60002-20 | O2 sensor ground, bank 1 pre-cat | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60002-21 | O2 sensor ground, bank 2 pre-cat | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60002-22 | O2 sensor ground, bank 1 post-cat | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60002-23 | Main relay control | low_side_out | M800-A-1 | AUX2 | switch_out | corroborated | |
| OEM-X60002-24 | O2 sensor ground, bank 2 post-cat | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60002-7 | O2 sensor heater, bank 1 post-cat | low_side_out | M800-A-33 | AUX7 | switch_out | corroborated | |
| OEM-X60003-1 | Mass air flow (MAF) signal | analog_in | M800-A-14 | AV1 | analog_in | corroborated | |
| OEM-X60003-10 | Throttle position sensor 2 | analog_in | M800-A-17 | Analog Voltage Input 4 | analog_in | corroborated | |
| OEM-X60003-15 | Exhaust camshaft ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-17 | MAF ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-18 | Intake camshaft ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-19 | Throttle position sensor 1 | analog_in | M800-A-15 | Analog Voltage Input 2 | analog_in | corroborated | |
| OEM-X60003-2 | Exhaust camshaft position | trigger_in | M800-B-2 | Cam Sync Timing Input | trigger_in | corroborated | |
| OEM-X60003-20 | Throttle ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-21 | Crankshaft ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-22 | Intake air temperature (IAT) | temp_in | M800-B-4 | Analog Temperature Input 2 | temp_in | corroborated | |
| OEM-X60003-23 | IAT ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-24 | Engine coolant temperature (ECT) | temp_in | M800-B-3 | Analog Temperature Input 1 | temp_in | corroborated | |
| OEM-X60003-25 | ECT ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-27 | Engine oil temperature | temp_in | M800-B-5 | Analog Temperature Input 3 | temp_in | corroborated | |
| OEM-X60003-28 | Oil temperature ground | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60003-29 | Knock sensor, cylinders 1-3 (A) | knock_in | — | — | — | corroborated | |
| OEM-X60003-30 | Knock sensor, cylinders 1-3 (B) | knock_in | — | — | — | corroborated | |
| OEM-X60003-31 | Knock sensor, cylinders 4-6 (A) | knock_in | — | — | — | corroborated | |
| OEM-X60003-32 | Knock sensor, cylinders 4-6 (B) | knock_in | — | — | — | corroborated | |
| OEM-X60003-33 | Injector cylinder 1 | injector_out | M800-A-19 | INJ1 | injector_out | corroborated | |
| OEM-X60003-34 | Injector cylinder 2 | injector_out | M800-A-20 | INJ2 | injector_out | corroborated | |
| OEM-X60003-35 | Injector cylinder 3 | injector_out | M800-A-21 | INJ3 | injector_out | corroborated | |
| OEM-X60003-36 | Injector cylinder 4 | injector_out | M800-A-22 | INJ4 | injector_out | corroborated | |
| OEM-X60003-37 | Injector cylinder 5 | injector_out | M800-A-27 | INJ5 | injector_out | corroborated | |
| OEM-X60003-38 | Injector cylinder 6 | injector_out | M800-A-28 | INJ6 | injector_out | corroborated | |
| OEM-X60003-40 | VANOS intake solenoid | low_side_out | M800-A-34 | AUX8 | switch_out | corroborated | |
| OEM-X60003-41 | VANOS exhaust solenoid | low_side_out | M800-A-29 | INJ7 | injector_out | corroborated | |
| OEM-X60003-42 | Evap purge valve | low_side_out | M800-A-30 | INJ8 | injector_out | corroborated | |
| OEM-X60003-43 | Throttle motor drive 1 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-44 | Throttle motor drive 2 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-45 | Map-controlled thermostat | low_side_out | — | — | — | corroborated | |
| OEM-X60003-46 | Idle speed control, close | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-47 | Idle speed control, open | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-48 | Knock sensor shield | shield | — | — | — | corroborated | |
| OEM-X60003-49 | DISA intake flap | low_side_out | — | — | — | corroborated | |
| OEM-X60003-5 | Intake camshaft position | trigger_in | — | — | — | corroborated | |
| OEM-X60003-7 | Throttle body +5V supply | vref | M800-A-2 | 5V Engine Sensor Supply | vref | corroborated | |
| OEM-X60003-8 | Crankshaft position | trigger_in | M800-B-1 | Crank Reference Timing Input | trigger_in | corroborated | |
| OEM-X60004-10 | Fuel pump relay control | low_side_out | M800-A-23 | AUX3 | switch_out | corroborated | |
| OEM-X60004-12 | Pedal ground 2 | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60004-13 | Pedal position signal 2 | analog_in | M800-A-25 | Analog Voltage Input 5 | analog_in | corroborated | |
| OEM-X60004-14 | Pedal +5V supply 2 | vref | M800-A-2 | 5V Engine Sensor Supply | vref | corroborated | |
| OEM-X60004-7 | Pedal ground 1 | sensor_ground | M800-B-14 + M800-B-15 + M800-B-16 | 0V Comms Reference + 0V Auxiliary Sensor Supply + 0V Engine Sensor Supply | sensor_ground | corroborated | |
| OEM-X60004-8 | Pedal position signal 1 | analog_in | M800-A-16 | Analog Voltage Input 3 | analog_in | corroborated | |
| OEM-X60004-9 | Pedal +5V supply 1 | vref | M800-A-2 | 5V Engine Sensor Supply | vref | corroborated | |
| OEM-X60005-1 | Ignition coil 3 | ignition_out | M800-A-5 | IGN3 | ignition_out | corroborated | |
| OEM-X60005-2 | Ignition coil 2 | ignition_out | M800-A-4 | IGN2 | ignition_out | corroborated | |
| OEM-X60005-3 | Ignition coil 1 | ignition_out | M800-A-3 | IGN1 | ignition_out | corroborated | |
| OEM-X60005-5 | Ignition ground | ground | M800-A-10 + M800-A-11 | GND Battery Negative + GND Battery Negative | ground | corroborated | |
| OEM-X60005-7 | Ignition coil 6 | ignition_out | M800-A-8 | IGN6 | ignition_out | corroborated | |
| OEM-X60005-8 | Ignition coil 5 | ignition_out | M800-A-7 | IGN5 | ignition_out | corroborated | |
| OEM-X60005-9 | Ignition coil 4 | ignition_out | M800-A-6 | IGN4 | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | no route | ECU main power (terminal 87 via main relay) | — | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | no route | Voltage supply (injector / fuse carrier) | — | |
| W3 | SP-14V-1 | M800-A-26 | 0.85 | no route | VBAT Battery Positive | — | |
| W4 | OEM-X60001-4 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W5 | OEM-X60001-5 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-X60001-6 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | OEM-X60005-5 | SP-GND-1 | 0.85 | no route | Ignition ground | — | |
| W8 | SP-GND-1 | M800-A-10 | 0.85 | no route | GND Battery Negative | — | |
| W9 | SP-GND-1 | M800-A-11 | 0.85 | no route | GND Battery Negative | — | |
| W10 | OEM-X60002-20 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 pre-cat | — | |
| W11 | OEM-X60002-21 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 pre-cat | — | |
| W12 | OEM-X60002-22 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 post-cat | — | |
| W13 | OEM-X60002-24 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 post-cat | — | |
| W14 | OEM-X60003-15 | SP-0V-1 | 0.5 | no route | Exhaust camshaft ground | — | |
| W15 | OEM-X60003-17 | SP-0V-1 | 0.5 | no route | MAF ground | — | |
| W16 | OEM-X60003-18 | SP-0V-1 | 0.5 | no route | Intake camshaft ground | — | |
| W17 | OEM-X60003-20 | SP-0V-1 | 0.5 | no route | Throttle ground | — | |
| W18 | OEM-X60003-21 | SP-0V-1 | 0.5 | no route | Crankshaft ground | — | |
| W19 | OEM-X60003-23 | SP-0V-1 | 0.5 | no route | IAT ground | — | |
| W20 | OEM-X60003-25 | SP-0V-1 | 0.5 | no route | ECT ground | — | |
| W21 | OEM-X60003-28 | SP-0V-1 | 0.5 | no route | Oil temperature ground | — | |
| W22 | OEM-X60004-12 | SP-0V-1 | 0.5 | no route | Pedal ground 2 | — | |
| W23 | OEM-X60004-7 | SP-0V-1 | 0.5 | no route | Pedal ground 1 | — | |
| W24 | SP-0V-1 | M800-B-14 | 0.5 | no route | 0V Comms Reference | — | |
| W25 | SP-0V-1 | M800-B-15 | 0.5 | no route | 0V Auxiliary Sensor Supply | — | |
| W26 | SP-0V-1 | M800-B-16 | 0.5 | no route | 0V Engine Sensor Supply | — | |
| W27 | OEM-X60003-7 | SP-5V1-1 | 0.5 | no route | Throttle body +5V supply | — | |
| W28 | OEM-X60004-14 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 2 | — | |
| W29 | OEM-X60004-9 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 1 | — | |
| W30 | SP-5V1-1 | M800-A-2 | 0.5 | no route | 5V Engine Sensor Supply | — | |
| W31 | OEM-X60003-8 | M800-B-1 | 0.5 | no route | Crankshaft position | — | |
| W32 | OEM-X60003-2 | M800-B-2 | 0.5 | no route | Exhaust camshaft position | — | |
| W33 | OEM-X60005-3 | M800-A-3 | 0.5 | no route | Ignition coil 1 | — | |
| W34 | OEM-X60005-2 | M800-A-4 | 0.5 | no route | Ignition coil 2 | — | |
| W35 | OEM-X60005-1 | M800-A-5 | 0.5 | no route | Ignition coil 3 | — | |
| W36 | OEM-X60005-9 | M800-A-6 | 0.5 | no route | Ignition coil 4 | — | |
| W37 | OEM-X60005-8 | M800-A-7 | 0.5 | no route | Ignition coil 5 | — | |
| W38 | OEM-X60005-7 | M800-A-8 | 0.5 | no route | Ignition coil 6 | — | |
| W39 | OEM-X60003-33 | M800-A-19 | 0.5 | no route | Injector cylinder 1 | — | |
| W40 | OEM-X60003-34 | M800-A-20 | 0.5 | no route | Injector cylinder 2 | — | |
| W41 | OEM-X60003-35 | M800-A-21 | 0.5 | no route | Injector cylinder 3 | — | |
| W42 | OEM-X60003-36 | M800-A-22 | 0.5 | no route | Injector cylinder 4 | — | |
| W43 | OEM-X60003-37 | M800-A-27 | 0.5 | no route | Injector cylinder 5 | — | |
| W44 | OEM-X60003-38 | M800-A-28 | 0.5 | no route | Injector cylinder 6 | — | |
| W45 | OEM-X60001-1 | M800-A-18 | 0.5 | no route | Injector/unloader relay control (terminal 15) | — | |
| W46 | OEM-X60002-23 | M800-A-1 | 0.5 | no route | Main relay control | — | |
| W47 | OEM-X60004-10 | M800-A-23 | 0.5 | no route | Fuel pump relay control | — | |
| W48 | OEM-X60002-1 | M800-A-24 | 0.5 | no route | O2 sensor heater, bank 1 pre-cat | — | |
| W49 | OEM-X60002-13 | M800-A-31 | 0.5 | no route | O2 sensor heater, bank 2 pre-cat | — | |
| W50 | OEM-X60002-19 | M800-A-32 | 0.5 | no route | O2 sensor heater, bank 2 post-cat | — | |
| W51 | OEM-X60002-7 | M800-A-33 | 0.5 | no route | O2 sensor heater, bank 1 post-cat | — | |
| W52 | OEM-X60003-40 | M800-A-34 | 0.5 | no route | VANOS intake solenoid | — | |
| W53 | OEM-X60003-41 | M800-A-29 | 0.5 | no route | VANOS exhaust solenoid | — | |
| W54 | OEM-X60003-42 | M800-A-30 | 0.5 | no route | Evap purge valve | — | |
| W55 | OEM-X60003-1 | M800-A-14 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W56 | OEM-X60003-19 | M800-A-15 | 0.5 | no route | Throttle position sensor 1 | — | |
| W57 | OEM-X60004-8 | M800-A-16 | 0.5 | no route | Pedal position signal 1 | — | |
| W58 | OEM-X60003-10 | M800-A-17 | 0.5 | no route | Throttle position sensor 2 | — | |
| W59 | OEM-X60004-13 | M800-A-25 | 0.5 | no route | Pedal position signal 2 | — | |
| W60 | OEM-X60002-14 | M800-B-20 | 0.5 | no route | O2 sensor signal, bank 1 pre-cat | — | |
| W61 | OEM-X60002-15 | M800-B-21 | 0.5 | no route | O2 sensor signal, bank 2 pre-cat | — | |
| W62 | OEM-X60002-16 | M800-B-22 | 0.5 | no route | O2 sensor signal, bank 1 post-cat | — | |
| W63 | OEM-X60003-24 | M800-B-3 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W64 | OEM-X60003-22 | M800-B-4 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W65 | OEM-X60003-27 | M800-B-5 | 0.5 | no route | Engine oil temperature | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | BMW-E46-MS43-CONN | BMW | E46 DME (MS43) harness connector | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 42.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (14)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | REQUIRED_UNMAPPED | OEM-X60003-43 | Required OEM function "Throttle motor drive 1 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60003-44 | Required OEM function "Throttle motor drive 2 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60003-5 | Required OEM function "Intake camshaft position" (trigger_in) is not connected to the new ECU. |
| info | NET_FAMILY | OEM-X60001-1 ↔ M800-A-18 | OEM-X60001-1 "Injector/unloader relay control (terminal 15)" [low_side_out] is wired to M800-A-18 "AUX1" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60002-1 ↔ M800-A-24 | OEM-X60002-1 "O2 sensor heater, bank 1 pre-cat" [low_side_out] is wired to M800-A-24 "AUX4" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60002-13 ↔ M800-A-31 | OEM-X60002-13 "O2 sensor heater, bank 2 pre-cat" [low_side_out] is wired to M800-A-31 "AUX5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60002-19 ↔ M800-A-32 | OEM-X60002-19 "O2 sensor heater, bank 2 post-cat" [low_side_out] is wired to M800-A-32 "AUX6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60002-23 ↔ M800-A-1 | OEM-X60002-23 "Main relay control" [low_side_out] is wired to M800-A-1 "AUX2" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60002-7 ↔ M800-A-33 | OEM-X60002-7 "O2 sensor heater, bank 1 post-cat" [low_side_out] is wired to M800-A-33 "AUX7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-40 ↔ M800-A-34 | OEM-X60003-40 "VANOS intake solenoid" [low_side_out] is wired to M800-A-34 "AUX8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-X60003-41 ↔ M800-A-29 | OEM-X60003-41 "VANOS exhaust solenoid" [low_side_out] is wired to M800-A-29 "INJ7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60003-42 ↔ M800-A-30 | OEM-X60003-42 "Evap purge valve" [low_side_out] is wired to M800-A-30 "INJ8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60004-10 ↔ M800-A-23 | OEM-X60004-10 "Fuel pump relay control" [low_side_out] is wired to M800-A-23 "AUX3" [switch_out]. Configure this output as low side. |
| info | UNMAPPED | OEM | 10 optional OEM pins are not mapped: OEM-X60002-18 O2 sensor signal, bank 2 post-cat; OEM-X60003-29 Knock sensor, cylinders 1-3 (A); OEM-X60003-30 Knock sensor, cylinders 1-3 (B); OEM-X60003-31 Knock sensor, cylinders 4-6 (A); OEM-X60003-32 Knock sensor, cylinders 4-6 (B); OEM-X60003-45 Map-controlled thermostat; OEM-X60003-46 Idle speed control, close; OEM-X60003-47 Idle speed control, open; OEM-X60003-48 Knock sensor shield; OEM-X60003-49 DISA intake flap |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X60001-7 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: needs add-on. Resolve these before building: - Drive-by-wire only with an add-on: MoTeC DBW4 expander (obsolete) - Needs CAN (E46 K-bus/CAN); not documented for this ECU - No knock input; the stock knock sensor would be unused - This car has EWS 3.3 (rolling code) immobilizer; needs a delete/bypass - Trigger pattern for BMW M54 not checked yet Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-X60003 5: Intake camshaft position: no free cam_hall/cam_vr/frequency_in input on MoTeC M800 - OEM-X60003 43: Throttle motor drive 1 (H-bridge): no free hbridge on MoTeC M800 - OEM-X60003 44: Throttle motor drive 2 (H-bridge): no free hbridge on MoTeC M800 Not wired: - OEM-X60001 7: Battery constant (terminal 30): MoTeC M800 has no battery-constant input; not needed - OEM-X60003 29: Knock sensor, cylinders 1-3 (A): no free knock input on MoTeC M800 - OEM-X60003 30: Knock sensor, cylinders 1-3 (B): no free knock input on MoTeC M800 - OEM-X60003 31: Knock sensor, cylinders 4-6 (A): no free knock input on MoTeC M800 - OEM-X60003 32: Knock sensor, cylinders 4-6 (B): no free knock input on MoTeC M800 - OEM-X60003 48: Knock sensor shield: no shield pin on MoTeC M800 - OEM-X60003 46: Idle speed control, close: no free hbridge on MoTeC M800 - OEM-X60003 47: Idle speed control, open: no free hbridge on MoTeC M800 - OEM-X60003 45: Map-controlled thermostat: no free low_side/ls_hs/injector/hbridge on MoTeC M800 - OEM-X60003 49: DISA intake flap: no free low_side/ls_hs/injector/hbridge on MoTeC M800 - OEM-X60002 18: O2 sensor signal, bank 2 post-cat: no free o2_narrowband/analog_0_5 on MoTeC M800
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | MoTeC M400/M600/M800/M880 Manual — Appendix L: Pin list by Function | https://starracecars.com/wp-content/uploads/resources/M400_M600_M800_M880_Manual_A5.pdf | archive | 2026-10-05 | b69bb8ffb674 |
| 4 | vendor_doc | MoTeC M800 OEM WRX56 Installation | https://motec.com.au | archive | 2026-10-05 | 2ca4be92bb65 |
| 2 | community_copy | ms4x.net: Siemens MS43 Pinout | https://www.ms4x.net/index.php?title=Siemens_MS43_Pinout | — | — | — |
| 2 | community_copy | rusefi wiki: 2002 BMW 325 / 2004 BMW 330Ci E46 DME pinout (M54/MS43) | https://github.com/rusefi/rusefi/wiki/2002-BMW-325-and-2004-BMW-330Ci-E46-DME-pinout | — | — | — |