Chevrolet Camaro SS 2010-15 (LS3/L99) → ECUMASTER EMU Black (auto)
Chevrolet Camaro SS 2010-15 (LS3/L99) — ECUMASTER — EMU Black
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 4: read the Findings page before cutting any wire |
| Size of the job | 80 wires · 8 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X1-19 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X1-47 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-X1-73 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-X2-78 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-X2-79 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-X1-11 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-X1-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-X1-30 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-X1-38 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-X1-49 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X2-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X2-34 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X2-35 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X2-52 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X2-53 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X2-56 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X2-60 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X2-66 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-X2-69 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-X1-33 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-X1-34 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-X1-36 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-X1-56 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X2-2 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X2-3 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X2-41 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X2-43 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X2-44 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X2-68 | EMUBLACK-Black-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X2-64 | EMUBLACK-Black-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X2-26 | EMUBLACK-Black-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X2-27 | EMUBLACK-Black-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X2-70 | EMUBLACK-Grey-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X2-73 | EMUBLACK-Grey-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X2-77 | EMUBLACK-Grey-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X2-76 | EMUBLACK-Black-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X2-75 | EMUBLACK-Black-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X2-74 | EMUBLACK-Grey-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X2-20 | EMUBLACK-Grey-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X2-37 | EMUBLACK-Grey-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X2-38 | EMUBLACK-Grey-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-X2-39 | EMUBLACK-Grey-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X2-18 | EMUBLACK-Grey-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-X2-19 | EMUBLACK-Grey-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X2-40 | EMUBLACK-Grey-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X2-17 | EMUBLACK-Grey-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X2-6 | EMUBLACK-Grey-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X2-5 | EMUBLACK-Grey-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X1-50 | EMUBLACK-Grey-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X1-59 | EMUBLACK-Grey-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X1-17 | EMUBLACK-Grey-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X1-51 | EMUBLACK-Grey-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-X1-52 | EMUBLACK-Grey-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-X1-58 | EMUBLACK-Grey-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-X1-63 | EMUBLACK-Grey-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-X1-64 | EMUBLACK-Grey-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-X1-65 | EMUBLACK-Grey-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-X1-41 | EMUBLACK-Black-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-X2-58 | EMUBLACK-Black-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-X1-29 | EMUBLACK-Black-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-X2-65 | EMUBLACK-Black-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-X1-32 | EMUBLACK-Black-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-X2-63 | EMUBLACK-Black-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-X1-10 | EMUBLACK-Black-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-X1-69 | EMUBLACK-Black-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-X2-21 | EMUBLACK-Black-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-X1-37 | EMUBLACK-Black-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-X1-71 | EMUBLACK-Black-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-X1-72 | EMUBLACK-Black-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-X1-9 | EMUBLACK-Black-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-X2-33 | EMUBLACK-Black-36 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUBLACK-Black-13 | EMUBLACK-Black-27 | open (OL) | +12 V supply must not touch power ground | |
| 2 | EMUBLACK-Black-26 | EMUBLACK-Black-27 | open (OL) | 5 V sensor reference must not touch power ground | |
| 3 | EMUBLACK-Black-13 | EMUBLACK-Black-26 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 4 | EMUBLACK-Black-29 | EMUBLACK-Black-13 | open (OL) | sensor ground must not touch +12 V supply | |
| 5 | EMUBLACK-Black-29 | EMUBLACK-Black-26 | open (OL) | sensor ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUBLACK-Black
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #5 | — | W46 | — | 0.5 | OEM-X2-75 | — | — | — |
| 10 | Switch #1 In | — | W78 | — | 0.5 | OEM-X1-72 | — | — | — |
| 11 | RS232 TXD | — | — | — | — | — | — | — | — |
| 12 | CAN H | — | — | — | — | — | — | — | — |
| 13 | Battery +12V | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Ignition coil #4 | — | W45 | — | 0.5 | OEM-X2-76 | — | — | — |
| 15 | EGT in #2 | — | — | — | — | — | — | — | — |
| 16 | Knock Sensor in #2 | — | W41 | — | 0.5 | OEM-X2-27 | — | — | — |
| 17 | Analog In #3 | — | W70 | — | 0.5 | OEM-X2-65 | — | — | — |
| 18 | TPS In | — | W69 | — | 0.5 | OEM-X1-29 | — | — | — |
| 19 | WBO Ip | — | — | — | — | — | — | — | — |
| 2 | EGT in #1 | — | — | — | — | — | — | — | — |
| 20 | VSS In | — | W77 | — | 0.5 | OEM-X1-71 | — | — | — |
| 21 | Camsync In #1 | — | W39 | — | 0.5 | OEM-X2-64 | — | — | — |
| 22 | WBO Rcal | — | — | — | — | — | — | — | — |
| 23 | Switch #2 In | — | W79 | — | 0.5 | OEM-X1-9 | — | — | — |
| 24 | RS232 RXD | — | — | — | — | — | — | — | — |
| 25 | CAN L | — | — | — | — | — | — | — | — |
| 26 | +5V supply | — | W37 | — | 0.5 | SP-5V1-1 | — | — | — |
| 27 | Power Ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 28 | Ecu Ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Sensor Ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Knock Sensor in #1 | — | W40 | — | 0.5 | OEM-X2-26 | — | — | — |
| 30 | Analog In #4 | — | W71 | — | 0.5 | OEM-X1-32 | — | — | — |
| 31 | Analog In #1 | — | W67 | — | 0.5 | OEM-X1-41 | — | — | — |
| 32 | IAT In | — | W75 | — | 0.5 | OEM-X2-21 | — | — | — |
| 33 | WBO VGND | — | — | — | — | — | — | — | — |
| 34 | +5V supply | — | — | — | — | — | — | — | — |
| 35 | Analog In #5 | — | W72 | — | 0.5 | OEM-X2-63 | — | — | — |
| 36 | Switch #3 In | — | W80 | — | 0.5 | OEM-X2-33 | — | — | — |
| 37 | Analog In #6 | — | W73 | — | 0.5 | OEM-X1-10 | — | — | — |
| 38 | Sensor Ground | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 39 | Sensor Ground | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | Analog In #2 | — | W68 | — | 0.5 | OEM-X2-58 | — | — | — |
| 5 | CLT In | — | W76 | — | 0.5 | OEM-X1-37 | — | — | — |
| 6 | WBO Vs | — | — | — | — | — | — | — | — |
| 7 | Camsync In #2 | — | — | — | — | — | — | — | — |
| 8 | Primary trigger | — | W38 | — | 0.5 | OEM-X2-68 | — | — | — |
| 9 | Flex Fuel In | — | W74 | — | 0.5 | OEM-X1-69 | — | — | — |
EMUBLACK-Grey
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #6 | — | W47 | — | 0.5 | OEM-X2-74 | — | — | — |
| 10 | H-Bridge #1 Winding B | — | W56 | — | 0.5 | OEM-X2-6 | — | — | — |
| 11 | H-Bridge #2 Winding B | — | W64 | — | 0.5 | OEM-X1-63 | — | — | — |
| 12 | AUX 5 | — | W62 | — | 0.5 | OEM-X1-52 | — | — | — |
| 13 | AUX 2 / Injector #8 | — | W59 | — | 0.5 | OEM-X1-59 | — | — | — |
| 14 | Injector #5 | — | W52 | — | 0.5 | OEM-X2-18 | — | — | — |
| 15 | Injector #2 | — | W49 | — | 0.5 | OEM-X2-37 | — | — | — |
| 15 | Injector #2 | — | W55 | — | 0.5 | OEM-X2-17 | — | — | — |
| 16 | Ignition coil #2 | — | W43 | — | 0.5 | OEM-X2-73 | — | — | — |
| 17 | Power Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition +12V | — | — | — | — | — | — | — | — |
| 19 | WBO Heater | — | W65 | — | 0.5 | OEM-X1-64 | — | — | — |
| 2 | H-Bridge #1 Winding A | — | W57 | — | 0.5 | OEM-X2-5 | — | — | — |
| 20 | AUX 4 / Tacho | — | W61 | — | 0.5 | OEM-X1-51 | — | — | — |
| 21 | AUX 1 / Injector #7 | — | W58 | — | 0.5 | OEM-X1-50 | — | — | — |
| 22 | Injector #6 | — | W53 | — | 0.5 | OEM-X2-19 | — | — | — |
| 23 | Injector #3 | — | W50 | — | 0.5 | OEM-X2-38 | — | — | — |
| 24 | Power Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | H-Bridge #2 Winding A | — | W66 | — | 0.5 | OEM-X1-65 | — | — | — |
| 4 | AUX 6 | — | W63 | — | 0.5 | OEM-X1-58 | — | — | — |
| 5 | AUX 3 | — | W60 | — | 0.5 | OEM-X1-17 | — | — | — |
| 6 | Injector #4 | — | W51 | — | 0.5 | OEM-X2-39 | — | — | — |
| 7 | Injector #1 | — | W48 | — | 0.5 | OEM-X2-20 | — | — | — |
| 7 | Injector #1 | — | W54 | — | 0.5 | OEM-X2-40 | — | — | — |
| 8 | Ignition coil #1 | — | W42 | — | 0.5 | OEM-X2-70 | — | — | — |
| 9 | Ignition coil #3 | — | W44 | — | 0.5 | OEM-X2-77 | — | — | — |
OEM-X1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | HO2S signal, bank 1 sensor 2 (post-cat) | — | W73 | — | 0.5 | EMUBLACK-Black-37 | — | — | — |
| 11 | HO2S low reference, bank 1 sensor 2 | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 12 | A/C refrigerant pressure signal | — | — | — | — | — | — | — | — |
| 17 | High speed cooling fan relay | — | W60 | — | 0.5 | EMUBLACK-Grey-5 | — | — | — |
| 19 | Ignition 1 voltage (key hot) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 20 | Battery positive voltage (batt hot) | — | — | — | — | — | — | — | — |
| 23 | APP sensor low reference | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Fuel tank pressure signal | — | — | — | — | — | — | — | — |
| 29 | Accelerator pedal position (APP) sensor 1 signal | — | W69 | — | 0.5 | EMUBLACK-Black-18 | — | — | — |
| 30 | APP sensor low reference | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 32 | Accelerator pedal position (APP) sensor 2 signal | — | W71 | — | 0.5 | EMUBLACK-Black-30 | — | — | — |
| 33 | 5V reference (fuel tank pressure) | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
| 34 | 5V reference (A/C pressure) | — | W29 | — | 0.5 | SP-5V1-1 | — | — | — |
| 36 | 5V reference (APP sensor) | — | W30 | — | 0.5 | SP-5V1-1 | — | — | — |
| 37 | Intake air temperature (IAT) signal | — | W76 | — | 0.5 | EMUBLACK-Black-5 | — | — | — |
| 38 | Intake air temperature (IAT) low reference | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 41 | Mass air flow (MAF) signal | — | W67 | — | 0.5 | EMUBLACK-Black-31 | — | — | — |
| 47 | Ignition 1 voltage (key hot) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 48 | Tachometer output | — | — | — | — | — | — | — | — |
| 49 | HO2S low reference, bank 2 sensor 2 | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 50 | Fuel pump relay control (primary) | — | W58 | — | 0.5 | EMUBLACK-Grey-21 | — | — | — |
| 51 | Fuel pump relay control (secondary) | — | W61 | — | 0.5 | EMUBLACK-Grey-20 | — | — | — |
| 52 | Starter enable relay control | — | W62 | — | 0.5 | EMUBLACK-Grey-12 | — | — | — |
| 56 | 5V reference (APP sensor) | — | W31 | — | 0.5 | SP-5V1-1 | — | — | — |
| 57 | VSS output to ABS (128k) | — | — | — | — | — | — | — | — |
| 58 | Low speed cooling fan relay | — | W63 | — | 0.5 | EMUBLACK-Grey-4 | — | — | — |
| 59 | Powertrain relay coil control (main relay) | — | W59 | — | 0.5 | EMUBLACK-Grey-13 | — | — | — |
| 61 | EVAP canister vent solenoid | — | — | — | — | — | — | — | — |
| 63 | A/C compressor clutch relay | — | W64 | — | 0.5 | EMUBLACK-Grey-11 | — | — | — |
| 64 | HO2S heater low control, bank 2 sensor 2 | — | W65 | — | 0.5 | EMUBLACK-Grey-19 | — | — | — |
| 65 | HO2S heater low control, bank 1 sensor 2 | — | W66 | — | 0.5 | EMUBLACK-Grey-3 | — | — | — |
| 68 | Malfunction indicator lamp (MIL) | — | — | — | — | — | — | — | — |
| 69 | HO2S signal, bank 2 sensor 2 (post-cat) | — | W74 | — | 0.5 | EMUBLACK-Black-9 | — | — | — |
| 71 | VSS high signal (manual trans) | — | W77 | — | 0.5 | EMUBLACK-Black-20 | — | — | — |
| 72 | VSS low signal (manual trans) | — | W78 | — | 0.5 | EMUBLACK-Black-10 | — | — | — |
| 73 | Power ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Brake switch signal | — | W79 | — | 0.5 | EMUBLACK-Black-23 | — | — | — |
OEM-X2
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Cylinder shutoff solenoid 1 (AFM) | — | — | — | — | — | — | — | — |
| 11 | Cylinder shutoff solenoid 4 (AFM) | — | — | — | — | — | — | — | — |
| 12 | HO2S heater low control, bank 1 sensor 1 | — | — | — | — | — | — | — | — |
| 13 | HO2S heater low control, bank 2 sensor 1 | — | — | — | — | — | — | — | — |
| 14 | Cylinder shutoff solenoid 2 (AFM) | — | — | — | — | — | — | — | — |
| 16 | Camshaft actuator solenoid (VVT) | — | — | — | — | — | — | — | — |
| 17 | Injector 8 | — | W55 | — | 0.5 | EMUBLACK-Grey-15 | — | — | — |
| 18 | Injector 5 | — | W52 | — | 0.5 | EMUBLACK-Grey-14 | — | — | — |
| 19 | Injector 6 | — | W53 | — | 0.5 | EMUBLACK-Grey-22 | — | — | — |
| 2 | 5V reference (crankshaft sensor) | — | W32 | — | 0.5 | SP-5V1-1 | — | — | — |
| 20 | Injector 1 | — | W48 | — | 0.5 | EMUBLACK-Grey-7 | — | — | — |
| 21 | Engine coolant temperature (ECT) signal | — | W75 | — | 0.5 | EMUBLACK-Black-32 | — | — | — |
| 22 | ECT low reference | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 26 | Knock sensor 1 signal A | — | W40 | — | 0.5 | EMUBLACK-Black-3 | — | — | — |
| 27 | Knock sensor 1 signal B | — | W41 | — | 0.5 | EMUBLACK-Black-16 | — | — | — |
| 29 | Knock sensor 2 signal A | — | — | — | — | — | — | — | — |
| 3 | 5V reference (throttle body) | — | W33 | — | 0.5 | SP-5V1-1 | — | — | — |
| 30 | Knock sensor 2 signal B | — | — | — | — | — | — | — | — |
| 32 | Generator field duty control | — | — | — | — | — | — | — | — |
| 33 | Oil level switch signal | — | W80 | — | 0.5 | EMUBLACK-Black-36 | — | — | — |
| 34 | Oil pressure low reference | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 35 | Throttle body low reference | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 37 | Injector 2 | — | W49 | — | 0.5 | EMUBLACK-Grey-15 | — | — | — |
| 38 | Injector 3 | — | W50 | — | 0.5 | EMUBLACK-Grey-23 | — | — | — |
| 39 | Injector 4 | — | W51 | — | 0.5 | EMUBLACK-Grey-6 | — | — | — |
| 40 | Injector 7 | — | W54 | — | 0.5 | EMUBLACK-Grey-7 | — | — | — |
| 41 | 5V reference (oil pressure) | — | W34 | — | 0.5 | SP-5V1-1 | — | — | — |
| 43 | 5V reference (MAP) | — | W35 | — | 0.5 | SP-5V1-1 | — | — | — |
| 44 | 5V reference (camshaft sensor) | — | W36 | — | 0.5 | SP-5V1-1 | — | — | — |
| 5 | Throttle actuator motor control 2 | — | W57 | — | 0.5 | EMUBLACK-Grey-2 | — | — | — |
| 50 | Engine oil pressure signal | — | — | — | — | — | — | — | — |
| 52 | Camshaft actuator low reference | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 53 | MAP low reference | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 56 | HO2S low reference, bank 1 sensor 1 | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 57 | HO2S signal, bank 1 sensor 1 (pre-cat) | — | — | — | — | — | — | — | — |
| 58 | Manifold absolute pressure (MAP) signal | — | W68 | — | 0.5 | EMUBLACK-Black-4 | — | — | — |
| 59 | HO2S signal, bank 2 sensor 1 (pre-cat) | — | — | — | — | — | — | — | — |
| 6 | Throttle actuator motor control 1 | — | W56 | — | 0.5 | EMUBLACK-Grey-10 | — | — | — |
| 60 | HO2S low reference, bank 2 sensor 1 | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 61 | Charge indicator signal | — | — | — | — | — | — | — | — |
| 63 | Throttle position sensor 2 signal | — | W72 | — | 0.5 | EMUBLACK-Black-35 | — | — | — |
| 64 | Camshaft position signal (4x) | — | W39 | — | 0.5 | EMUBLACK-Black-21 | — | — | — |
| 65 | Throttle position sensor 1 signal | — | W70 | — | 0.5 | EMUBLACK-Black-17 | — | — | — |
| 66 | Camshaft position low reference | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 68 | Crankshaft position signal (58x) | — | W38 | — | 0.5 | EMUBLACK-Black-8 | — | — | — |
| 69 | Crankshaft position low reference | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 70 | Ignition coil 1 control | — | W42 | — | 0.5 | EMUBLACK-Grey-8 | — | — | — |
| 71 | Ignition coil 8 control | — | — | — | — | — | — | — | — |
| 72 | Ignition coil 7 control | — | — | — | — | — | — | — | — |
| 73 | Ignition coil 2 control | — | W43 | — | 0.5 | EMUBLACK-Grey-16 | — | — | — |
| 74 | Ignition coil 6 control | — | W47 | — | 0.5 | EMUBLACK-Grey-1 | — | — | — |
| 75 | Ignition coil 5 control | — | W46 | — | 0.5 | EMUBLACK-Black-1 | — | — | — |
| 76 | Ignition coil 4 control | — | W45 | — | 0.5 | EMUBLACK-Black-14 | — | — | — |
| 77 | Ignition coil 3 control | — | W44 | — | 0.5 | EMUBLACK-Grey-9 | — | — | — |
| 78 | Coil low reference (odd bank) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 79 | Coil low reference (even bank) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | EVAP canister purge solenoid | — | — | — | — | — | — | — | — |
| 9 | Cylinder shutoff solenoid 3 (AFM) | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W11 | — | 0.5 | OEM-X1-11 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-X1-23 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-X1-30 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-X1-38 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-X1-49 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-X2-22 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-X2-34 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X2-35 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X2-52 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X2-53 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X2-56 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-X2-60 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-X2-66 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-X2-69 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | EMUBLACK-Black-29 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | EMUBLACK-Black-38 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | EMUBLACK-Black-39 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X1-19 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X1-47 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | EMUBLACK-Black-13 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W28 | — | 0.5 | OEM-X1-33 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | OEM-X1-34 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | OEM-X1-36 | — | — | — |
| 1 | — | — | W31 | — | 0.5 | OEM-X1-56 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | OEM-X2-2 | — | — | — |
| 1 | — | — | W33 | — | 0.5 | OEM-X2-3 | — | — | — |
| 1 | — | — | W34 | — | 0.5 | OEM-X2-41 | — | — | — |
| 1 | — | — | W35 | — | 0.5 | OEM-X2-43 | — | — | — |
| 1 | — | — | W36 | — | 0.5 | OEM-X2-44 | — | — | — |
| 1 | — | — | W37 | — | 0.5 | EMUBLACK-Black-26 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-X1-73 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-X2-78 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-X2-79 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | EMUBLACK-Black-27 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | EMUBLACK-Black-28 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | EMUBLACK-Grey-17 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | EMUBLACK-Grey-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X1-10 | HO2S signal, bank 1 sensor 2 (post-cat) | lambda_nb_in | EMUBLACK-Black-37 | Analog In #6 | analog_in | single_source | |
| OEM-X1-11 | HO2S low reference, bank 1 sensor 2 | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X1-12 | A/C refrigerant pressure signal | analog_in | — | — | — | corroborated | |
| OEM-X1-17 | High speed cooling fan relay | low_side_out | EMUBLACK-Grey-5 | AUX 3 | low_side_out | corroborated | |
| OEM-X1-19 | Ignition 1 voltage (key hot) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-X1-20 | Battery positive voltage (batt hot) | power_in | — | — | — | single_source | |
| OEM-X1-23 | APP sensor low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X1-24 | Fuel tank pressure signal | analog_in | — | — | — | corroborated | |
| OEM-X1-29 | Accelerator pedal position (APP) sensor 1 signal | analog_in | EMUBLACK-Black-18 | TPS In | analog_in | single_source | |
| OEM-X1-30 | APP sensor low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X1-32 | Accelerator pedal position (APP) sensor 2 signal | analog_in | EMUBLACK-Black-30 | Analog In #4 | analog_in | single_source | |
| OEM-X1-33 | 5V reference (fuel tank pressure) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X1-34 | 5V reference (A/C pressure) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X1-36 | 5V reference (APP sensor) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X1-37 | Intake air temperature (IAT) signal | temp_in | EMUBLACK-Black-5 | CLT In | temp_in | corroborated | |
| OEM-X1-38 | Intake air temperature (IAT) low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X1-41 | Mass air flow (MAF) signal | analog_in | EMUBLACK-Black-31 | Analog In #1 | analog_in | corroborated | |
| OEM-X1-47 | Ignition 1 voltage (key hot) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-X1-48 | Tachometer output | tacho_out | — | — | — | corroborated | |
| OEM-X1-49 | HO2S low reference, bank 2 sensor 2 | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X1-50 | Fuel pump relay control (primary) | low_side_out | EMUBLACK-Grey-21 | AUX 1 / Injector #7 | low_side_out | corroborated | |
| OEM-X1-51 | Fuel pump relay control (secondary) | low_side_out | EMUBLACK-Grey-20 | AUX 4 / Tacho | low_side_out | corroborated | |
| OEM-X1-52 | Starter enable relay control | low_side_out | EMUBLACK-Grey-12 | AUX 5 | low_side_out | corroborated | |
| OEM-X1-56 | 5V reference (APP sensor) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X1-57 | VSS output to ABS (128k) | tacho_out | — | — | — | corroborated | |
| OEM-X1-58 | Low speed cooling fan relay | low_side_out | EMUBLACK-Grey-4 | AUX 6 | low_side_out | corroborated | |
| OEM-X1-59 | Powertrain relay coil control (main relay) | low_side_out | EMUBLACK-Grey-13 | AUX 2 / Injector #8 | low_side_out | corroborated | |
| OEM-X1-61 | EVAP canister vent solenoid | low_side_out | — | — | — | corroborated | |
| OEM-X1-63 | A/C compressor clutch relay | low_side_out | EMUBLACK-Grey-11 | H-Bridge #2 Winding B | hbridge_out | corroborated | |
| OEM-X1-64 | HO2S heater low control, bank 2 sensor 2 | low_side_out | EMUBLACK-Grey-19 | WBO Heater | low_side_out | single_source | |
| OEM-X1-65 | HO2S heater low control, bank 1 sensor 2 | low_side_out | EMUBLACK-Grey-3 | H-Bridge #2 Winding A | hbridge_out | single_source | |
| OEM-X1-68 | Malfunction indicator lamp (MIL) | low_side_out | — | — | — | corroborated | |
| OEM-X1-69 | HO2S signal, bank 2 sensor 2 (post-cat) | lambda_nb_in | EMUBLACK-Black-9 | Flex Fuel In | analog_in | single_source | |
| OEM-X1-71 | VSS high signal (manual trans) | digital_in | EMUBLACK-Black-20 | VSS In | digital_in | corroborated | |
| OEM-X1-72 | VSS low signal (manual trans) | digital_in | EMUBLACK-Black-10 | Switch #1 In | digital_in | corroborated | |
| OEM-X1-73 | Power ground | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-X1-9 | Brake switch signal | digital_in | EMUBLACK-Black-23 | Switch #2 In | digital_in | corroborated | |
| OEM-X2-10 | Cylinder shutoff solenoid 1 (AFM) | low_side_out | — | — | — | corroborated | |
| OEM-X2-11 | Cylinder shutoff solenoid 4 (AFM) | low_side_out | — | — | — | corroborated | |
| OEM-X2-12 | HO2S heater low control, bank 1 sensor 1 | low_side_out | — | — | — | single_source | |
| OEM-X2-13 | HO2S heater low control, bank 2 sensor 1 | low_side_out | — | — | — | single_source | |
| OEM-X2-14 | Cylinder shutoff solenoid 2 (AFM) | low_side_out | — | — | — | corroborated | |
| OEM-X2-16 | Camshaft actuator solenoid (VVT) | low_side_out | — | — | — | corroborated | |
| OEM-X2-17 | Injector 8 | injector_out | EMUBLACK-Grey-15 | Injector #2 | injector_out | single_source | |
| OEM-X2-18 | Injector 5 | injector_out | EMUBLACK-Grey-14 | Injector #5 | injector_out | single_source | |
| OEM-X2-19 | Injector 6 | injector_out | EMUBLACK-Grey-22 | Injector #6 | injector_out | single_source | |
| OEM-X2-2 | 5V reference (crankshaft sensor) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X2-20 | Injector 1 | injector_out | EMUBLACK-Grey-7 | Injector #1 | injector_out | single_source | |
| OEM-X2-21 | Engine coolant temperature (ECT) signal | temp_in | EMUBLACK-Black-32 | IAT In | temp_in | corroborated | |
| OEM-X2-22 | ECT low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-26 | Knock sensor 1 signal A | knock_in | EMUBLACK-Black-3 | Knock Sensor in #1 | knock_in | corroborated | |
| OEM-X2-27 | Knock sensor 1 signal B | knock_in | EMUBLACK-Black-16 | Knock Sensor in #2 | knock_in | single_source | |
| OEM-X2-29 | Knock sensor 2 signal A | knock_in | — | — | — | corroborated | |
| OEM-X2-3 | 5V reference (throttle body) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X2-30 | Knock sensor 2 signal B | knock_in | — | — | — | single_source | |
| OEM-X2-32 | Generator field duty control | low_side_out | — | — | — | corroborated | |
| OEM-X2-33 | Oil level switch signal | digital_in | EMUBLACK-Black-36 | Switch #3 In | digital_in | corroborated | |
| OEM-X2-34 | Oil pressure low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-35 | Throttle body low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-37 | Injector 2 | injector_out | EMUBLACK-Grey-15 | Injector #2 | injector_out | single_source | |
| OEM-X2-38 | Injector 3 | injector_out | EMUBLACK-Grey-23 | Injector #3 | injector_out | single_source | |
| OEM-X2-39 | Injector 4 | injector_out | EMUBLACK-Grey-6 | Injector #4 | injector_out | single_source | |
| OEM-X2-40 | Injector 7 | injector_out | EMUBLACK-Grey-7 | Injector #1 | injector_out | single_source | |
| OEM-X2-41 | 5V reference (oil pressure) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X2-43 | 5V reference (MAP) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X2-44 | 5V reference (camshaft sensor) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-X2-5 | Throttle actuator motor control 2 | hbridge_out | EMUBLACK-Grey-2 | H-Bridge #1 Winding A | hbridge_out | corroborated | |
| OEM-X2-50 | Engine oil pressure signal | analog_in | — | — | — | corroborated | |
| OEM-X2-52 | Camshaft actuator low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-53 | MAP low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-56 | HO2S low reference, bank 1 sensor 1 | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-57 | HO2S signal, bank 1 sensor 1 (pre-cat) | lambda_nb_in | — | — | — | single_source | |
| OEM-X2-58 | Manifold absolute pressure (MAP) signal | analog_in | EMUBLACK-Black-4 | Analog In #2 | analog_in | corroborated | |
| OEM-X2-59 | HO2S signal, bank 2 sensor 1 (pre-cat) | lambda_nb_in | — | — | — | single_source | |
| OEM-X2-6 | Throttle actuator motor control 1 | hbridge_out | EMUBLACK-Grey-10 | H-Bridge #1 Winding B | hbridge_out | corroborated | |
| OEM-X2-60 | HO2S low reference, bank 2 sensor 1 | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-61 | Charge indicator signal | low_side_out | — | — | — | corroborated | |
| OEM-X2-63 | Throttle position sensor 2 signal | analog_in | EMUBLACK-Black-35 | Analog In #5 | analog_in | single_source | |
| OEM-X2-64 | Camshaft position signal (4x) | trigger_in | EMUBLACK-Black-21 | Camsync In #1 | trigger_in | single_source | |
| OEM-X2-65 | Throttle position sensor 1 signal | analog_in | EMUBLACK-Black-17 | Analog In #3 | analog_in | single_source | |
| OEM-X2-66 | Camshaft position low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-68 | Crankshaft position signal (58x) | trigger_in | EMUBLACK-Black-8 | Primary trigger | trigger_in | single_source | |
| OEM-X2-69 | Crankshaft position low reference | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-X2-70 | Ignition coil 1 control | ignition_out | EMUBLACK-Grey-8 | Ignition coil #1 | ignition_out | single_source | |
| OEM-X2-71 | Ignition coil 8 control | ignition_out | — | — | — | single_source | |
| OEM-X2-72 | Ignition coil 7 control | ignition_out | — | — | — | single_source | |
| OEM-X2-73 | Ignition coil 2 control | ignition_out | EMUBLACK-Grey-16 | Ignition coil #2 | ignition_out | single_source | |
| OEM-X2-74 | Ignition coil 6 control | ignition_out | EMUBLACK-Grey-1 | Ignition coil #6 | ignition_out | single_source | |
| OEM-X2-75 | Ignition coil 5 control | ignition_out | EMUBLACK-Black-1 | Ignition coil #5 | ignition_out | single_source | |
| OEM-X2-76 | Ignition coil 4 control | ignition_out | EMUBLACK-Black-14 | Ignition coil #4 | ignition_out | single_source | |
| OEM-X2-77 | Ignition coil 3 control | ignition_out | EMUBLACK-Grey-9 | Ignition coil #3 | ignition_out | single_source | |
| OEM-X2-78 | Coil low reference (odd bank) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-X2-79 | Coil low reference (even bank) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-X2-8 | EVAP canister purge solenoid | low_side_out | — | — | — | corroborated | |
| OEM-X2-9 | Cylinder shutoff solenoid 3 (AFM) | low_side_out | — | — | — | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X1-19 | SP-14V-1 | 0.85 | no route | Ignition 1 voltage (key hot) | — | |
| W2 | OEM-X1-47 | SP-14V-1 | 0.85 | no route | Ignition 1 voltage (key hot) | — | |
| W3 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | no route | Battery +12V | — | |
| W4 | OEM-X1-73 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W5 | OEM-X2-78 | SP-GND-1 | 0.85 | no route | Coil low reference (odd bank) | — | |
| W6 | OEM-X2-79 | SP-GND-1 | 0.85 | no route | Coil low reference (even bank) | — | |
| W7 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | no route | Power Ground | — | |
| W8 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | no route | Ecu Ground | — | |
| W9 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | no route | Power Ground | — | |
| W10 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | no route | Power Ground | — | |
| W11 | OEM-X1-11 | SP-0V-1 | 0.5 | no route | HO2S low reference, bank 1 sensor 2 | — | |
| W12 | OEM-X1-23 | SP-0V-1 | 0.5 | no route | APP sensor low reference | — | |
| W13 | OEM-X1-30 | SP-0V-1 | 0.5 | no route | APP sensor low reference | — | |
| W14 | OEM-X1-38 | SP-0V-1 | 0.5 | no route | Intake air temperature (IAT) low reference | — | |
| W15 | OEM-X1-49 | SP-0V-1 | 0.5 | no route | HO2S low reference, bank 2 sensor 2 | — | |
| W16 | OEM-X2-22 | SP-0V-1 | 0.5 | no route | ECT low reference | — | |
| W17 | OEM-X2-34 | SP-0V-1 | 0.5 | no route | Oil pressure low reference | — | |
| W18 | OEM-X2-35 | SP-0V-1 | 0.5 | no route | Throttle body low reference | — | |
| W19 | OEM-X2-52 | SP-0V-1 | 0.5 | no route | Camshaft actuator low reference | — | |
| W20 | OEM-X2-53 | SP-0V-1 | 0.5 | no route | MAP low reference | — | |
| W21 | OEM-X2-56 | SP-0V-1 | 0.5 | no route | HO2S low reference, bank 1 sensor 1 | — | |
| W22 | OEM-X2-60 | SP-0V-1 | 0.5 | no route | HO2S low reference, bank 2 sensor 1 | — | |
| W23 | OEM-X2-66 | SP-0V-1 | 0.5 | no route | Camshaft position low reference | — | |
| W24 | OEM-X2-69 | SP-0V-1 | 0.5 | no route | Crankshaft position low reference | — | |
| W25 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | no route | Sensor Ground | — | |
| W26 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | no route | Sensor Ground | — | |
| W27 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | no route | Sensor Ground | — | |
| W28 | OEM-X1-33 | SP-5V1-1 | 0.5 | no route | 5V reference (fuel tank pressure) | — | |
| W29 | OEM-X1-34 | SP-5V1-1 | 0.5 | no route | 5V reference (A/C pressure) | — | |
| W30 | OEM-X1-36 | SP-5V1-1 | 0.5 | no route | 5V reference (APP sensor) | — | |
| W31 | OEM-X1-56 | SP-5V1-1 | 0.5 | no route | 5V reference (APP sensor) | — | |
| W32 | OEM-X2-2 | SP-5V1-1 | 0.5 | no route | 5V reference (crankshaft sensor) | — | |
| W33 | OEM-X2-3 | SP-5V1-1 | 0.5 | no route | 5V reference (throttle body) | — | |
| W34 | OEM-X2-41 | SP-5V1-1 | 0.5 | no route | 5V reference (oil pressure) | — | |
| W35 | OEM-X2-43 | SP-5V1-1 | 0.5 | no route | 5V reference (MAP) | — | |
| W36 | OEM-X2-44 | SP-5V1-1 | 0.5 | no route | 5V reference (camshaft sensor) | — | |
| W37 | SP-5V1-1 | EMUBLACK-Black-26 | 0.5 | no route | +5V supply | — | |
| W38 | OEM-X2-68 | EMUBLACK-Black-8 | 0.5 | no route | Crankshaft position signal (58x) | — | |
| W39 | OEM-X2-64 | EMUBLACK-Black-21 | 0.5 | no route | Camshaft position signal (4x) | — | |
| W40 | OEM-X2-26 | EMUBLACK-Black-3 | 0.5 | no route | Knock sensor 1 signal A | — | |
| W41 | OEM-X2-27 | EMUBLACK-Black-16 | 0.5 | no route | Knock sensor 1 signal B | — | |
| W42 | OEM-X2-70 | EMUBLACK-Grey-8 | 0.5 | no route | Ignition coil 1 control | — | |
| W43 | OEM-X2-73 | EMUBLACK-Grey-16 | 0.5 | no route | Ignition coil 2 control | — | |
| W44 | OEM-X2-77 | EMUBLACK-Grey-9 | 0.5 | no route | Ignition coil 3 control | — | |
| W45 | OEM-X2-76 | EMUBLACK-Black-14 | 0.5 | no route | Ignition coil 4 control | — | |
| W46 | OEM-X2-75 | EMUBLACK-Black-1 | 0.5 | no route | Ignition coil 5 control | — | |
| W47 | OEM-X2-74 | EMUBLACK-Grey-1 | 0.5 | no route | Ignition coil 6 control | — | |
| W48 | OEM-X2-20 | EMUBLACK-Grey-7 | 0.5 | no route | Injector 1 | — | |
| W49 | OEM-X2-37 | EMUBLACK-Grey-15 | 0.5 | no route | Injector 2 | — | |
| W50 | OEM-X2-38 | EMUBLACK-Grey-23 | 0.5 | no route | Injector 3 | — | |
| W51 | OEM-X2-39 | EMUBLACK-Grey-6 | 0.5 | no route | Injector 4 | — | |
| W52 | OEM-X2-18 | EMUBLACK-Grey-14 | 0.5 | no route | Injector 5 | — | |
| W53 | OEM-X2-19 | EMUBLACK-Grey-22 | 0.5 | no route | Injector 6 | — | |
| W54 | OEM-X2-40 | EMUBLACK-Grey-7 | 0.5 | no route | Injector 7 | — | |
| W55 | OEM-X2-17 | EMUBLACK-Grey-15 | 0.5 | no route | Injector 8 | — | |
| W56 | OEM-X2-6 | EMUBLACK-Grey-10 | 0.5 | no route | Throttle actuator motor control 1 | — | |
| W57 | OEM-X2-5 | EMUBLACK-Grey-2 | 0.5 | no route | Throttle actuator motor control 2 | — | |
| W58 | OEM-X1-50 | EMUBLACK-Grey-21 | 0.5 | no route | Fuel pump relay control (primary) | — | |
| W59 | OEM-X1-59 | EMUBLACK-Grey-13 | 0.5 | no route | Powertrain relay coil control (main relay) | — | |
| W60 | OEM-X1-17 | EMUBLACK-Grey-5 | 0.5 | no route | High speed cooling fan relay | — | |
| W61 | OEM-X1-51 | EMUBLACK-Grey-20 | 0.5 | no route | Fuel pump relay control (secondary) | — | |
| W62 | OEM-X1-52 | EMUBLACK-Grey-12 | 0.5 | no route | Starter enable relay control | — | |
| W63 | OEM-X1-58 | EMUBLACK-Grey-4 | 0.5 | no route | Low speed cooling fan relay | — | |
| W64 | OEM-X1-63 | EMUBLACK-Grey-11 | 0.5 | no route | A/C compressor clutch relay | — | |
| W65 | OEM-X1-64 | EMUBLACK-Grey-19 | 0.5 | no route | HO2S heater low control, bank 2 sensor 2 | — | |
| W66 | OEM-X1-65 | EMUBLACK-Grey-3 | 0.5 | no route | HO2S heater low control, bank 1 sensor 2 | — | |
| W67 | OEM-X1-41 | EMUBLACK-Black-31 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W68 | OEM-X2-58 | EMUBLACK-Black-4 | 0.5 | no route | Manifold absolute pressure (MAP) signal | — | |
| W69 | OEM-X1-29 | EMUBLACK-Black-18 | 0.5 | no route | Accelerator pedal position (APP) sensor 1 signal | — | |
| W70 | OEM-X2-65 | EMUBLACK-Black-17 | 0.5 | no route | Throttle position sensor 1 signal | — | |
| W71 | OEM-X1-32 | EMUBLACK-Black-30 | 0.5 | no route | Accelerator pedal position (APP) sensor 2 signal | — | |
| W72 | OEM-X2-63 | EMUBLACK-Black-35 | 0.5 | no route | Throttle position sensor 2 signal | — | |
| W73 | OEM-X1-10 | EMUBLACK-Black-37 | 0.5 | no route | HO2S signal, bank 1 sensor 2 (post-cat) | — | |
| W74 | OEM-X1-69 | EMUBLACK-Black-9 | 0.5 | no route | HO2S signal, bank 2 sensor 2 (post-cat) | — | |
| W75 | OEM-X2-21 | EMUBLACK-Black-32 | 0.5 | no route | Engine coolant temperature (ECT) signal | — | |
| W76 | OEM-X1-37 | EMUBLACK-Black-5 | 0.5 | no route | Intake air temperature (IAT) signal | — | |
| W77 | OEM-X1-71 | EMUBLACK-Black-20 | 0.5 | no route | VSS high signal (manual trans) | — | |
| W78 | OEM-X1-72 | EMUBLACK-Black-10 | 0.5 | no route | VSS low signal (manual trans) | — | |
| W79 | OEM-X1-9 | EMUBLACK-Black-23 | 0.5 | no route | Brake switch signal | — | |
| W80 | OEM-X2-33 | EMUBLACK-Black-36 | 0.5 | no route | Oil level switch signal | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (9)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | NET_MERGED | EMUBLACK-Grey-15 + OEM-X2-17 + OEM-X2-37 | 2 different OEM functions share one net: OEM-X2-17 Injector 8; OEM-X2-37 Injector 2 |
| error | NET_MERGED | EMUBLACK-Grey-7 + OEM-X2-20 + OEM-X2-40 | 2 different OEM functions share one net: OEM-X2-20 Injector 1; OEM-X2-40 Injector 7 |
| error | REQUIRED_UNMAPPED | OEM-X2-71 | Required OEM function "Ignition coil 8 control" (ignition_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X2-72 | Required OEM function "Ignition coil 7 control" (ignition_out) is not connected to the new ECU. |
| warn | DBW_MOTOR_CURRENT | EMUBLACK-Grey-10 | Cannot confirm EMU Black can drive the throttle motor: EMUBLACK-Grey-10 "H-Bridge #1 Winding B" is rated 6.5 A peak, but the motor stall current at OEM-X2-6 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | DBW_MOTOR_CURRENT | EMUBLACK-Grey-2 | Cannot confirm EMU Black can drive the throttle motor: EMUBLACK-Grey-2 "H-Bridge #1 Winding A" is rated 6.5 A peak, but the motor stall current at OEM-X2-5 is unknown. Add the motor's peak current from a source, or measure the motor resistance: peak ≈ 14 V ÷ R (Hondata measured 4.9 A for a Civic Si body, 10.4 A for a ZDX body; holding current is about 1 A). |
| warn | NET_FAMILY | OEM-X1-63 ↔ EMUBLACK-Grey-11 | OEM-X1-63 "A/C compressor clutch relay" [low_side_out] is wired to EMUBLACK-Grey-11 "H-Bridge #2 Winding B" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| warn | NET_FAMILY | OEM-X1-65 ↔ EMUBLACK-Grey-3 | OEM-X1-65 "HO2S heater low control, bank 1 sensor 2" [low_side_out] is wired to EMUBLACK-Grey-3 "H-Bridge #2 Winding A" [hbridge_out]. A half-bridge can act as a low-side switch only if configured that way. |
| info | UNMAPPED | OEM | 21 optional OEM pins are not mapped: OEM-X1-12 A/C refrigerant pressure signal; OEM-X1-24 Fuel tank pressure signal; OEM-X1-48 Tachometer output; OEM-X1-57 VSS output to ABS (128k); OEM-X1-61 EVAP canister vent solenoid; OEM-X1-68 Malfunction indicator lamp (MIL); OEM-X2-10 Cylinder shutoff solenoid 1 (AFM); OEM-X2-11 Cylinder shutoff solenoid 4 (AFM); OEM-X2-12 HO2S heater low control, bank 1 sensor 1; OEM-X2-13 HO2S heater low control, bank 2 sensor 1; OEM-X2-14 Cylinder shutoff solenoid 2 (AFM); OEM-X2-16 Camshaft actuator solenoid (VVT); OEM-X2-29 Knock sensor 2 signal A; OEM-X2-30 Knock sensor 2 signal B; OEM-X2-32 Generator field duty control; OEM-X2-50 Engine oil pressure signal; OEM-X2-57 HO2S signal, bank 1 sensor 1 (pre-cat); OEM-X2-59 HO2S signal, bank 2 sensor 1 (pre-cat); OEM-X2-61 Charge indicator signal; OEM-X2-8 EVAP canister purge solenoid; OEM-X2-9 Cylinder shutoff solenoid 3 (AFM) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X1-20 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-X2 72: Ignition coil 7 control: no free ignition output on ECUMASTER EMU Black - OEM-X2 71: Ignition coil 8 control: no free ignition output on ECUMASTER EMU Black Not wired: - OEM-X1 20: Battery positive voltage (batt hot): ECUMASTER EMU Black has no battery-constant input; not needed - OEM-X2 29: Knock sensor 2 signal A: no free knock input on ECUMASTER EMU Black - OEM-X2 30: Knock sensor 2 signal B: no free knock input on ECUMASTER EMU Black - OEM-X2 12: HO2S heater low control, bank 1 sensor 1: no free heater_low_side/low_side/ls_hs/hbridge on ECUMASTER EMU Black - OEM-X2 13: HO2S heater low control, bank 2 sensor 1: no free heater_low_side/low_side/ls_hs/hbridge on ECUMASTER EMU Black - OEM-X2 10: Cylinder shutoff solenoid 1 (AFM): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X2 14: Cylinder shutoff solenoid 2 (AFM): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X2 9: Cylinder shutoff solenoid 3 (AFM): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X2 11: Cylinder shutoff solenoid 4 (AFM): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X1 61: EVAP canister vent solenoid: no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X1 68: Malfunction indicator lamp (MIL): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X2 16: Camshaft actuator solenoid (VVT): no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X2 32: Generator field duty control: no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X2 61: Charge indicator signal: no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X2 8: EVAP canister purge solenoid: no free low_side/ls_hs/injector/hbridge on ECUMASTER EMU Black - OEM-X1 48: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on ECUMASTER EMU Black - OEM-X1 57: VSS output to ABS (128k): no free frequency_out/tacho/low_side/ls_hs on ECUMASTER EMU Black - OEM-X2 57: HO2S signal, bank 1 sensor 1 (pre-cat): no free o2_narrowband/analog_0_5 on ECUMASTER EMU Black - OEM-X2 59: HO2S signal, bank 2 sensor 1 (pre-cat): no free o2_narrowband/analog_0_5 on ECUMASTER EMU Black - OEM-X1 12: A/C refrigerant pressure signal: no free analog_0_5 on ECUMASTER EMU Black - OEM-X1 24: Fuel tank pressure signal: no free analog_0_5 on ECUMASTER EMU Black - OEM-X2 50: Engine oil pressure signal: no free analog_0_5 on ECUMASTER EMU Black - EMUBLACK-Grey 18: Ignition +12V: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER EMU Black — pinout (Black 39-pin / Grey 24-pin) | https://www.ecumaster.com/wp/wp-content/uploads/2020/05/EMU_Black_pinout.pdf | archive | 2026-10-05 | 096b2b4df1bd |
| 4 | vendor_doc | MaxxECU webhelp: Wiring — plug-in ECU Chevrolet Corvette C6 (GM E38 ECM) | http://www.maxxecu.com/webhelp/wirings-pluginecu-chevrolet_corvette_c6_e38_ecm.html | — | — | — |
| 2 | community_copy | lt1swap.com: E38 ECM Connector Pinouts | https://lt1swap.com/E38 ECM Connector Pinouts.htm | — | — | — |