Toyota Supra A80 1993-98 USDM (2JZ-GTE, non-VVT) → Link G5 Voodoo Pro V1 (auto)
Toyota Supra A80 1993-98 USDM (2JZ-GTE, non-VVT) — Link — G5 Voodoo Pro V1
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 8: read the Findings page before cutting any wire |
| Size of the job | 49 wires · 6 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-E9-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-E9-69 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-E9-78 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-E9-79 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-E9-80 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-E9-41 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-E9-27 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-E9-26 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-E9-25 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-E9-50 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-E9-49 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-E9-57 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-E9-56 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-E9-55 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-E9-54 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-E9-53 | G5VOODOOPROV-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-E9-52 | G5VOODOOPROV-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-E9-20 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-E9-19 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-E9-18 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-E9-17 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-E9-16 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-E9-15 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-E10-1 | G5VOODOOPROV-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-E10-23 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-E10-24 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-E9-71 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-E9-72 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-E10-22 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-E10-6 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-E9-32 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-E9-33 | G5VOODOOPROV-A-A28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-E9-34 | G5VOODOOPROV-A-A27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-E9-35 | G5VOODOOPROV-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-E9-60 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-E9-73 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-E9-74 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-E9-62 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-E9-43 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-E9-47 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-E9-48 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-E9-44 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-E9-45 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-E10-2 | G5VOODOOPROV-A-A31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-E10-21 | G5VOODOOPROV-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-E9-58 | G5VOODOOPROV-B-B21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-E10-15 | G5VOODOOPROV-B-B20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-E10-4 | G5VOODOOPROV-B-B19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-E9-76 | G5VOODOOPROV-B-B30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | OEM-E9-4 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W21 | — | 0.5 | OEM-E9-17 | — | — | — |
| A10 | Ignition 4 | — | W15 | — | 0.5 | OEM-E9-54 | — | — | — |
| A11 | Ignition 3 | — | W14 | — | 0.5 | OEM-E9-55 | — | — | — |
| A12 | Ignition 2 | — | W13 | — | 0.5 | OEM-E9-56 | — | — | — |
| A13 | Ignition 1 | — | W12 | — | 0.5 | OEM-E9-57 | — | — | — |
| A14 | Analogue Volt 4 | — | W41 | — | 0.5 | OEM-E9-48 | — | — | — |
| A15 | Analogue Temp 1 | — | W42 | — | 0.5 | OEM-E9-44 | — | — | — |
| A16 | Analogue Temp 2 | — | W43 | — | 0.5 | OEM-E9-45 | — | — | — |
| A17 | Analogue Volt 1 | — | W38 | — | 0.5 | OEM-E9-62 | — | — | — |
| A18 | Aux 4 | — | W30 | — | 0.5 | OEM-E10-6 | — | — | — |
| A19 | Aux 3 | — | W29 | — | 0.5 | OEM-E10-22 | — | — | — |
| A2 | Injection 3 | — | W20 | — | 0.5 | OEM-E9-18 | — | — | — |
| A20 | Aux 2 | — | W26 | — | 0.5 | OEM-E10-24 | — | — | — |
| A21 | Aux 1 | — | W25 | — | 0.5 | OEM-E10-23 | — | — | — |
| A22 | Analogue Volt 2 | — | W39 | — | 0.5 | OEM-E9-43 | — | — | — |
| A23 | Digital Input 3 | — | W45 | — | 0.5 | OEM-E10-21 | — | — | — |
| A26 | Aux 8 | — | W34 | — | 0.5 | OEM-E9-35 | — | — | — |
| A27 | Aux 7 | — | W33 | — | 0.5 | OEM-E9-34 | — | — | — |
| A28 | Aux 6 | — | W32 | — | 0.5 | OEM-E9-33 | — | — | — |
| A29 | Aux 5 | — | W31 | — | 0.5 | OEM-E9-32 | — | — | — |
| A3 | Injection 2 | — | W19 | — | 0.5 | OEM-E9-19 | — | — | — |
| A30 | Digital Input 1 | — | W9 | — | 0.5 | OEM-E9-25 | — | — | — |
| A31 | Digital Input 2 | — | W44 | — | 0.5 | OEM-E10-2 | — | — | — |
| A32 | +5V Out | — | W6 | — | 0.5 | OEM-E9-41 | — | — | — |
| A33 | Analogue Volt 3 | — | W40 | — | 0.5 | OEM-E9-47 | — | — | — |
| A4 | Injection 1 | — | W18 | — | 0.5 | OEM-E9-20 | — | — | — |
| A6 | Ignition Switch | — | W24 | — | 0.5 | OEM-E10-1 | — | — | — |
| A8 | Trigger 1 | — | W7 | — | 0.5 | OEM-E9-27 | — | — | — |
| A9 | Trigger 2 | — | W8 | — | 0.5 | OEM-E9-26 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W36 | — | 0.5 | OEM-E9-73 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | W17 | — | 0.5 | OEM-E9-52 | — | — | — |
| B13 | Ignition 5 | — | W16 | — | 0.5 | OEM-E9-53 | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | — | — | — | — | — | — | — |
| B16 | Analogue Volt 7 | — | — | — | — | — | — | — | — |
| B18 | Aux 9 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 | — | W48 | — | 0.5 | OEM-E10-4 | — | — | — |
| B2 | Injection 7 | — | W35 | — | 0.5 | OEM-E9-60 | — | — | — |
| B20 | Digital Input 5 | — | W47 | — | 0.5 | OEM-E10-15 | — | — | — |
| B21 | Digital Input 4 | — | W46 | — | 0.5 | OEM-E9-58 | — | — | — |
| B23 | Analogue Volt 8 | — | — | — | — | — | — | — | — |
| B24 | Analogue Volt 9 | — | — | — | — | — | — | — | — |
| B26 | Aux 10 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | — | — | — | — | — | — | — |
| B28 | Digital Input 9 | — | — | — | — | — | — | — | — |
| B29 | Digital Input 8 | — | — | — | — | — | — | — | — |
| B3 | Injection 6 | — | W23 | — | 0.5 | OEM-E9-15 | — | — | — |
| B30 | Digital Input 7 | — | W49 | — | 0.5 | OEM-E9-76 | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | — | — | — | — | — | — | — |
| B4 | Injection 5 | — | W22 | — | 0.5 | OEM-E9-16 | — | — | — |
| B6 | Analogue Temp 3 | — | — | — | — | — | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W11 | — | 0.5 | OEM-E9-49 | — | — | — |
| B9 | Knock 1 | — | W10 | — | 0.5 | OEM-E9-50 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | — | — | — | — | — | — | — |
| E10 | Injection 14 / Ignition 10 | — | — | — | — | — | — | — | — |
| E11 | Injection 13 / Ignition 9 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 11 | — | — | — | — | — | — | — | — |
| E15 | Aux 13 / WB Heater 1 | — | W27 | — | 0.5 | OEM-E9-71 | — | — | — |
| E16 | RE 1 | — | — | — | — | — | — | — | — |
| E17 | IPE 1 | — | — | — | — | — | — | — | — |
| E18 | APE 1 | — | — | — | — | — | — | — | — |
| E19 | MES 1 | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | — | — | — | — | — | — | — |
| E20 | Aux 12 | — | — | — | — | — | — | — | — |
| E22 | Aux 14 / WB Heater 2 | — | W28 | — | 0.5 | OEM-E9-72 | — | — | — |
| E23 | RE 2 | — | — | — | — | — | — | — | — |
| E24 | IPE 2 | — | — | — | — | — | — | — | — |
| E25 | APE 2 | — | — | — | — | — | — | — | — |
| E26 | MES 2 | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | — | — | — | — | — | — | — |
| E4 | Injection 9 | — | W37 | — | 0.5 | OEM-E9-74 | — | — | — |
| E8 | Injection 16 / Ignition 12 | — | — | — | — | — | — | — | — |
| E9 | Injection 15 / Ignition 11 | — | — | — | — | — | — | — | — |
OEM-E10
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition switch (IGSW) | — | W24 | — | 0.5 | G5VOODOOPROV-A-A6 | — | — | — |
| 15 | Electrical load sensor (ELS) | — | W47 | — | 0.5 | G5VOODOOPROV-B-B20 | — | — | — |
| 16 | Tachometer output | — | — | — | — | — | — | — | — |
| 2 | Vehicle speed sensor (SP1) | — | W44 | — | 0.5 | G5VOODOOPROV-A-A31 | — | — | — |
| 21 | Fuel pump diagnostic (DI) | — | W45 | — | 0.5 | G5VOODOOPROV-A-A23 | — | — | — |
| 22 | Fuel pump control (FPC) | — | W29 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 23 | A/C clutch relay (ACMG) | — | W25 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 24 | Main relay control (M-REL) | — | W26 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 31 | ECU power +B (main relay) | — | — | — | — | — | — | — | — |
| 33 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 4 | Brake switch (STP) | — | W48 | — | 0.5 | G5VOODOOPROV-B-B19 | — | — | — |
| 6 | Malfunction indicator lamp (MIL) | — | W30 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
OEM-E9
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 15 | Injector 6 | — | W23 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 16 | Injector 5 | — | W22 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 17 | Injector 4 | — | W21 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 18 | Injector 3 | — | W20 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 19 | Injector 2 | — | W19 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 20 | Injector 1 | — | W18 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 25 | Camshaft position 2 (G2) | — | W9 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 26 | Camshaft position 1 (G1) | — | W8 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 27 | Crank position (NE) | — | W7 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
| 32 | ISC stepper winding | — | W31 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 33 | ISC stepper winding | — | W32 | — | 0.5 | G5VOODOOPROV-A-A28 | — | — | — |
| 34 | ISC stepper winding | — | W33 | — | 0.5 | G5VOODOOPROV-A-A27 | — | — | — |
| 35 | ISC stepper winding | — | W34 | — | 0.5 | G5VOODOOPROV-A-A26 | — | — | — |
| 4 | Power ground (E11) | — | W1 | — | 0.85 | SP-GND-1 | — | — | — |
| 41 | Sensor supply +5V (VCC) | — | W6 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
| 43 | Throttle position (VTA1) | — | W39 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 44 | Coolant temperature (THW) | — | W42 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 45 | Intake air temperature (THA) | — | W43 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 47 | O2 sensor 2 (OX2) | — | W40 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 48 | O2 sensor 1 (OX1) | — | W41 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 49 | Knock sensor 2 (KNK2) | — | W11 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 5 | Cam sensor 2 ground (G2-) | — | — | — | — | — | — | — | — |
| 50 | Knock sensor 1 (KNK1) | — | W10 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 52 | Ignition 6 (IGT6) | — | W17 | — | 0.5 | G5VOODOOPROV-B-B12 | — | — | — |
| 53 | Ignition 5 (IGT5) | — | W16 | — | 0.5 | G5VOODOOPROV-B-B13 | — | — | — |
| 54 | Ignition 4 (IGT4) | — | W15 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
| 55 | Ignition 3 (IGT3) | — | W14 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 56 | Ignition 2 (IGT2) | — | W13 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 57 | Ignition 1 (IGT1) | — | W12 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 58 | Ignition confirmation (IGF) | — | W46 | — | 0.5 | G5VOODOOPROV-B-B21 | — | — | — |
| 6 | Cam sensor 1 ground (G1-) | — | — | — | — | — | — | — | — |
| 60 | Wastegate VSV (boost control) | — | W35 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 62 | MAP sensor (PIM) | — | W38 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 65 | Sensor ground (E2) | — | — | — | — | — | — | — | — |
| 69 | ECU power ground (E1) | — | W2 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Crank sensor ground (NE-) | — | — | — | — | — | — | — | — |
| 71 | O2 heater 1 (HT1) | — | W27 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 72 | O2 heater 2 (HT2) | — | W28 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 73 | Fuel pressure-up VSV (FPU) | — | W36 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 74 | Purge VSV (EVAP) | — | W37 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 76 | Starter signal (STA) | — | W49 | — | 0.5 | G5VOODOOPROV-B-B30 | — | — | — |
| 78 | Power ground (E01) | — | W3 | — | 0.85 | SP-GND-1 | — | — | — |
| 79 | Power ground (E01/E02) | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 80 | Power ground (E01/E02) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-E9-4 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-E9-69 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-E9-78 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-E9-79 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-E9-80 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-E10-1 | Ignition switch (IGSW) | digital_in | G5VOODOOPROV-A-A6 | Ignition Switch | digital_in | corroborated | |
| OEM-E10-15 | Electrical load sensor (ELS) | digital_in | G5VOODOOPROV-B-B20 | Digital Input 5 | digital_in | single_source | |
| OEM-E10-16 | Tachometer output | tacho_out | — | — | — | corroborated | |
| OEM-E10-2 | Vehicle speed sensor (SP1) | digital_in | G5VOODOOPROV-A-A31 | Digital Input 2 | digital_in | corroborated | |
| OEM-E10-21 | Fuel pump diagnostic (DI) | digital_in | G5VOODOOPROV-A-A23 | Digital Input 3 | digital_in | single_source | |
| OEM-E10-22 | Fuel pump control (FPC) | low_side_out | G5VOODOOPROV-A-A19 | Aux 3 | low_side_out | corroborated | |
| OEM-E10-23 | A/C clutch relay (ACMG) | low_side_out | G5VOODOOPROV-A-A21 | Aux 1 | low_side_out | corroborated | |
| OEM-E10-24 | Main relay control (M-REL) | low_side_out | G5VOODOOPROV-A-A20 | Aux 2 | low_side_out | corroborated | |
| OEM-E10-31 | ECU power +B (main relay) | power_in | — | — | — | corroborated | |
| OEM-E10-33 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-E10-4 | Brake switch (STP) | digital_in | G5VOODOOPROV-B-B19 | Digital Input 6 | digital_in | single_source | |
| OEM-E10-6 | Malfunction indicator lamp (MIL) | low_side_out | G5VOODOOPROV-A-A18 | Aux 4 | low_side_out | corroborated | |
| OEM-E9-15 | Injector 6 | injector_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | corroborated | |
| OEM-E9-16 | Injector 5 | injector_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | corroborated | |
| OEM-E9-17 | Injector 4 | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | corroborated | |
| OEM-E9-18 | Injector 3 | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | corroborated | |
| OEM-E9-19 | Injector 2 | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | corroborated | |
| OEM-E9-20 | Injector 1 | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | corroborated | |
| OEM-E9-25 | Camshaft position 2 (G2) | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | corroborated | |
| OEM-E9-26 | Camshaft position 1 (G1) | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | corroborated | |
| OEM-E9-27 | Crank position (NE) | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | corroborated | |
| OEM-E9-32 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A29 | Aux 5 | switch_out | corroborated | |
| OEM-E9-33 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A28 | Aux 6 | switch_out | corroborated | |
| OEM-E9-34 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A27 | Aux 7 | switch_out | corroborated | |
| OEM-E9-35 | ISC stepper winding | low_side_out | G5VOODOOPROV-A-A26 | Aux 8 | switch_out | corroborated | |
| OEM-E9-4 | Power ground (E11) | ground | — | — | — | single_source | |
| OEM-E9-41 | Sensor supply +5V (VCC) | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-E9-43 | Throttle position (VTA1) | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | corroborated | |
| OEM-E9-44 | Coolant temperature (THW) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | corroborated | |
| OEM-E9-45 | Intake air temperature (THA) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | corroborated | |
| OEM-E9-47 | O2 sensor 2 (OX2) | lambda_nb_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | single_source | |
| OEM-E9-48 | O2 sensor 1 (OX1) | lambda_nb_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | corroborated | |
| OEM-E9-49 | Knock sensor 2 (KNK2) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | corroborated | |
| OEM-E9-5 | Cam sensor 2 ground (G2-) | sensor_ground | — | — | — | corroborated | |
| OEM-E9-50 | Knock sensor 1 (KNK1) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | corroborated | |
| OEM-E9-52 | Ignition 6 (IGT6) | ignition_out | G5VOODOOPROV-B-B12 | Ignition 6 | ignition_out | corroborated | |
| OEM-E9-53 | Ignition 5 (IGT5) | ignition_out | G5VOODOOPROV-B-B13 | Ignition 5 | ignition_out | corroborated | |
| OEM-E9-54 | Ignition 4 (IGT4) | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | corroborated | |
| OEM-E9-55 | Ignition 3 (IGT3) | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | corroborated | |
| OEM-E9-56 | Ignition 2 (IGT2) | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | corroborated | |
| OEM-E9-57 | Ignition 1 (IGT1) | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | corroborated | |
| OEM-E9-58 | Ignition confirmation (IGF) | digital_in | G5VOODOOPROV-B-B21 | Digital Input 4 | digital_in | single_source | |
| OEM-E9-6 | Cam sensor 1 ground (G1-) | sensor_ground | — | — | — | corroborated | |
| OEM-E9-60 | Wastegate VSV (boost control) | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | single_source | |
| OEM-E9-62 | MAP sensor (PIM) | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | single_source | |
| OEM-E9-65 | Sensor ground (E2) | sensor_ground | — | — | — | corroborated | |
| OEM-E9-69 | ECU power ground (E1) | ground | — | — | — | corroborated | |
| OEM-E9-7 | Crank sensor ground (NE-) | sensor_ground | — | — | — | corroborated | |
| OEM-E9-71 | O2 heater 1 (HT1) | low_side_out | G5VOODOOPROV-E-E15 | Aux 13 / WB Heater 1 | low_side_out | single_source | |
| OEM-E9-72 | O2 heater 2 (HT2) | low_side_out | G5VOODOOPROV-E-E22 | Aux 14 / WB Heater 2 | low_side_out | single_source | |
| OEM-E9-73 | Fuel pressure-up VSV (FPU) | low_side_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | single_source | |
| OEM-E9-74 | Purge VSV (EVAP) | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | single_source | |
| OEM-E9-76 | Starter signal (STA) | digital_in | G5VOODOOPROV-B-B30 | Digital Input 7 | digital_in | single_source | |
| OEM-E9-78 | Power ground (E01) | ground | — | — | — | single_source | |
| OEM-E9-79 | Power ground (E01/E02) | ground | — | — | — | corroborated | |
| OEM-E9-80 | Power ground (E01/E02) | ground | — | — | — | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-E9-4 | SP-GND-1 | 0.85 | no route | Power ground (E11) | — | |
| W2 | OEM-E9-69 | SP-GND-1 | 0.85 | no route | ECU power ground (E1) | — | |
| W3 | OEM-E9-78 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W4 | OEM-E9-79 | SP-GND-1 | 0.85 | no route | Power ground (E01/E02) | — | |
| W5 | OEM-E9-80 | SP-GND-1 | 0.85 | no route | Power ground (E01/E02) | — | |
| W6 | OEM-E9-41 | G5VOODOOPROV-A-A32 | 0.5 | no route | Sensor supply +5V (VCC) | — | |
| W7 | OEM-E9-27 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crank position (NE) | — | |
| W8 | OEM-E9-26 | G5VOODOOPROV-A-A9 | 0.5 | no route | Camshaft position 1 (G1) | — | |
| W9 | OEM-E9-25 | G5VOODOOPROV-A-A30 | 0.5 | no route | Camshaft position 2 (G2) | — | |
| W10 | OEM-E9-50 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor 1 (KNK1) | — | |
| W11 | OEM-E9-49 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor 2 (KNK2) | — | |
| W12 | OEM-E9-57 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition 1 (IGT1) | — | |
| W13 | OEM-E9-56 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition 2 (IGT2) | — | |
| W14 | OEM-E9-55 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition 3 (IGT3) | — | |
| W15 | OEM-E9-54 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition 4 (IGT4) | — | |
| W16 | OEM-E9-53 | G5VOODOOPROV-B-B13 | 0.5 | no route | Ignition 5 (IGT5) | — | |
| W17 | OEM-E9-52 | G5VOODOOPROV-B-B12 | 0.5 | no route | Ignition 6 (IGT6) | — | |
| W18 | OEM-E9-20 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector 1 | — | |
| W19 | OEM-E9-19 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector 2 | — | |
| W20 | OEM-E9-18 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector 3 | — | |
| W21 | OEM-E9-17 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector 4 | — | |
| W22 | OEM-E9-16 | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector 5 | — | |
| W23 | OEM-E9-15 | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector 6 | — | |
| W24 | OEM-E10-1 | G5VOODOOPROV-A-A6 | 0.5 | no route | Ignition switch (IGSW) | — | |
| W25 | OEM-E10-23 | G5VOODOOPROV-A-A21 | 0.5 | no route | A/C clutch relay (ACMG) | — | |
| W26 | OEM-E10-24 | G5VOODOOPROV-A-A20 | 0.5 | no route | Main relay control (M-REL) | — | |
| W27 | OEM-E9-71 | G5VOODOOPROV-E-E15 | 0.5 | no route | O2 heater 1 (HT1) | — | |
| W28 | OEM-E9-72 | G5VOODOOPROV-E-E22 | 0.5 | no route | O2 heater 2 (HT2) | — | |
| W29 | OEM-E10-22 | G5VOODOOPROV-A-A19 | 0.5 | no route | Fuel pump control (FPC) | — | |
| W30 | OEM-E10-6 | G5VOODOOPROV-A-A18 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W31 | OEM-E9-32 | G5VOODOOPROV-A-A29 | 0.5 | no route | ISC stepper winding | — | |
| W32 | OEM-E9-33 | G5VOODOOPROV-A-A28 | 0.5 | no route | ISC stepper winding | — | |
| W33 | OEM-E9-34 | G5VOODOOPROV-A-A27 | 0.5 | no route | ISC stepper winding | — | |
| W34 | OEM-E9-35 | G5VOODOOPROV-A-A26 | 0.5 | no route | ISC stepper winding | — | |
| W35 | OEM-E9-60 | G5VOODOOPROV-B-B2 | 0.5 | no route | Wastegate VSV (boost control) | — | |
| W36 | OEM-E9-73 | G5VOODOOPROV-B-B1 | 0.5 | no route | Fuel pressure-up VSV (FPU) | — | |
| W37 | OEM-E9-74 | G5VOODOOPROV-E-E4 | 0.5 | no route | Purge VSV (EVAP) | — | |
| W38 | OEM-E9-62 | G5VOODOOPROV-A-A17 | 0.5 | no route | MAP sensor (PIM) | — | |
| W39 | OEM-E9-43 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position (VTA1) | — | |
| W40 | OEM-E9-47 | G5VOODOOPROV-A-A33 | 0.5 | no route | O2 sensor 2 (OX2) | — | |
| W41 | OEM-E9-48 | G5VOODOOPROV-A-A14 | 0.5 | no route | O2 sensor 1 (OX1) | — | |
| W42 | OEM-E9-44 | G5VOODOOPROV-A-A15 | 0.5 | no route | Coolant temperature (THW) | — | |
| W43 | OEM-E9-45 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (THA) | — | |
| W44 | OEM-E10-2 | G5VOODOOPROV-A-A31 | 0.5 | no route | Vehicle speed sensor (SP1) | — | |
| W45 | OEM-E10-21 | G5VOODOOPROV-A-A23 | 0.5 | no route | Fuel pump diagnostic (DI) | — | |
| W46 | OEM-E9-58 | G5VOODOOPROV-B-B21 | 0.5 | no route | Ignition confirmation (IGF) | — | |
| W47 | OEM-E10-15 | G5VOODOOPROV-B-B20 | 0.5 | no route | Electrical load sensor (ELS) | — | |
| W48 | OEM-E10-4 | G5VOODOOPROV-B-B19 | 0.5 | no route | Brake switch (STP) | — | |
| W49 | OEM-E9-76 | G5VOODOOPROV-B-B30 | 0.5 | no route | Starter signal (STA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (19)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | INJECTOR_BALLAST | G5 Voodoo Pro V1 | The 2JZ-GTE injectors (2JZ-GTE fuel injector) are low-impedance, but G5 Voodoo Pro V1 drives saturated (high-Z) injectors only. Add a ballast resistor pack in series with each injector, or use an ECU with low-Z / peak-and-hold injector drivers. |
| error | REQUIRED_UNMAPPED | OEM-E10-31 | Required OEM function "ECU power +B (main relay)" (power_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-4 | Required OEM function "Power ground (E11)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-65 | Required OEM function "Sensor ground (E2)" (sensor_ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-69 | Required OEM function "ECU power ground (E1)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-78 | Required OEM function "Power ground (E01)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-79 | Required OEM function "Power ground (E01/E02)" (ground) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-E9-80 | Required OEM function "Power ground (E01/E02)" (ground) is not connected to the new ECU. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A20 | G5VOODOOPROV-A-A20 "Aux 2" drives OEM-E10-24 Main relay control (M-REL) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | LOAD_UNKNOWN | G5VOODOOPROV-A-A21 | G5VOODOOPROV-A-A21 "Aux 1" drives OEM-E10-23 A/C clutch relay (ACMG) (load 0.2 A) but its current rating is unknown. Check the ECU manual. |
| warn | NET_FAMILY | OEM-E9-25 ↔ G5VOODOOPROV-A-A30 | OEM-E9-25 "Camshaft position 2 (G2)" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-E9-32 ↔ G5VOODOOPROV-A-A29 | OEM-E9-32 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A29 "Aux 5" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-33 ↔ G5VOODOOPROV-A-A28 | OEM-E9-33 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A28 "Aux 6" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-34 ↔ G5VOODOOPROV-A-A27 | OEM-E9-34 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A27 "Aux 7" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-35 ↔ G5VOODOOPROV-A-A26 | OEM-E9-35 "ISC stepper winding" [low_side_out] is wired to G5VOODOOPROV-A-A26 "Aux 8" [switch_out]. Configure this output as low side. |
| info | NET_FAMILY | OEM-E9-60 ↔ G5VOODOOPROV-B-B2 | OEM-E9-60 "Wastegate VSV (boost control)" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-73 ↔ G5VOODOOPROV-B-B1 | OEM-E9-73 "Fuel pressure-up VSV (FPU)" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-E9-74 ↔ G5VOODOOPROV-E-E4 | OEM-E9-74 "Purge VSV (EVAP)" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 4 optional OEM pins are not mapped: OEM-E10-16 Tachometer output; OEM-E9-5 Cam sensor 2 ground (G2-); OEM-E9-6 Cam sensor 1 ground (G1-); OEM-E9-7 Crank sensor ground (NE-) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-E10-33 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - Main-relay feed: no ecu_main_power pin on the stock or the new ECU - Link G5 Voodoo Pro V1: no power-ground pins in the library - Link G5 Voodoo Pro V1: no sensor-ground pin in the library - OEM-E10 31: ECU power +B (main relay): no rule for class ecu_main_power; wire by hand - OEM-E9 65: Sensor ground (E2): no rule for class ground_sensor; wire by hand Not wired: - OEM-E10 33: Battery constant (BATT): Link G5 Voodoo Pro V1 has no battery-constant input; not needed - OEM-E10 16: Tachometer output: no free tacho/frequency_out/low_side/ls_hs on Link G5 Voodoo Pro V1 - OEM-E9 6: Cam sensor 1 ground (G1-): no rule for class ground_sensor; wire by hand - OEM-E9 5: Cam sensor 2 ground (G2-): no rule for class ground_sensor; wire by hand - OEM-E9 7: Crank sensor ground (NE-): no rule for class ground_sensor; wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | ECUMASTER: ECU2JZ JZA80 2JZ-GTE adapter technical information (knock sensor count) | https://drive.google.com/file/d/15sTEetwLt0aKjuQo6aXODn4EBAkEJrtN/view | archive | 2026-10-05 | 6a4adabba0f5 |
| 4 | vendor_doc | Link G5 Voodoo Pro V1 Installer I/O Table | https://kb.linkecu.com/__attachments/a_5cf0fc044bcfb915ac75562b29399beb93e47860e38990b3c01614530f927686/G5%20Voodoo%20Pro%20V1%20Installer%20IO%20Table.pdf | — | — | — |
| 4 | vendor_doc | Link SupraLink TS2JZX install manual (JZA80 2JZ-GTE non-VVT) | https://linkecu.com/documentation/TS2JZX.pdf | — | — | — |
| 4 | service_manual | Toyota FSM P1300 Igniter Circuit (2JZ-GTE) — IGT1-6 / IGF ECM terminals | http://97supraturbo.com/Trouble%20Codes/P1300%20Ignitor.pdf | — | — | — |