Toyota Supra A80 1997-2002 JDM (2JZ-GTE VVT-i, single-turbo) → FuelTech FT450 (auto)
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 6: read the Findings page before cutting any wire |
| Size of the job | 38 wires · 10 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-B78-16 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-B78-7 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-B78-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | FT450-A-A13 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-B74-21 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-B74-31 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-B74-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-B75-17 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | FT450-A-A7 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-B74-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-B75-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-B75-19 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-B78-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-0V-1 | FT450-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-B75-2 | FT450-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-B74-23 | FT450-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | FT450-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-B74-10 | FT450-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B74-11 | FT450-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B74-12 | FT450-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-B74-13 | FT450-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-B75-5 | FT450-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-B75-6 | FT450-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-B74-1 | FT450-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-B74-2 | FT450-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-B74-3 | FT450-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-B74-4 | FT450-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-B74-17 | FT450-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-B74-18 | FT450-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-B74-19 | FT450-A-A5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-B74-20 | FT450-A-A6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-B75-9 | FT450-A-A23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-B75-15 | FT450-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-B75-23 | FT450-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-B75-16 | FT450-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-B75-24 | FT450-A-A25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-B75-14 | FT450-A-A24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-B75-22 | FT450-A-A26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | FT450-A-A12 | FT450-A-A13 | open (OL) | sensor ground must not touch +12 V supply | |
| 2 | FT450-A-A12 | FT450-A-A14 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 3 | FT450-A-A14 | FT450-A-A13 | open (OL) | 5 V sensor reference must not touch +12 V supply | |
| 4 | FT450-A-A7 | FT450-A-A13 | open (OL) | power ground must not touch +12 V supply | |
| 5 | FT450-A-A7 | FT450-A-A14 | open (OL) | power ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
FT450-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injector 1 (Bank A) | — | W22 | — | 0.5 | OEM-B75-5 | — | — | — |
| A1 | Injector 1 (Bank A) | — | W24 | — | 0.5 | OEM-B74-1 | — | — | — |
| A1 | Injector 1 (Bank A) | — | W26 | — | 0.5 | OEM-B74-3 | — | — | — |
| A10 | Ignition 3 | — | W21 | — | 0.5 | OEM-B74-13 | — | — | — |
| A11 | Ignition 4 | — | — | — | — | — | — | — | — |
| A12 | Signal ground | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| A13 | +12V switched | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| A14 | +5V sensor supply | — | W15 | — | 0.5 | OEM-B75-2 | — | — | — |
| A15 | CAN A LOW | — | — | — | — | — | — | — | — |
| A16 | CAN A HIGH | — | — | — | — | — | — | — | — |
| A17 | Phase input (cam) | — | W18 | — | 0.5 | OEM-B74-10 | — | — | — |
| A18 | RPM reference (crank -) | — | W16 | — | 0.5 | OEM-B74-23 | — | — | — |
| A18 | RPM reference (crank -) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| A19 | RPM signal (crank +) | — | — | — | — | — | — | — | — |
| A2 | Injector 2 (Bank A) | — | W23 | — | 0.5 | OEM-B75-6 | — | — | — |
| A2 | Injector 2 (Bank A) | — | W25 | — | 0.5 | OEM-B74-2 | — | — | — |
| A2 | Injector 2 (Bank A) | — | W27 | — | 0.5 | OEM-B74-4 | — | — | — |
| A20 | White input 1 | — | W33 | — | 0.5 | OEM-B75-15 | — | — | — |
| A21 | White input 2 | — | W34 | — | 0.5 | OEM-B75-23 | — | — | — |
| A22 | White input 3 (TPS) | — | W35 | — | 0.5 | OEM-B75-16 | — | — | — |
| A23 | White input 4 (oil pressure) | — | W32 | — | 0.5 | OEM-B75-9 | — | — | — |
| A24 | White input 5 (water temp) | — | W37 | — | 0.5 | OEM-B75-14 | — | — | — |
| A25 | White input 6 (fuel pressure) | — | W36 | — | 0.5 | OEM-B75-24 | — | — | — |
| A26 | White input 7 (air temp) | — | W38 | — | 0.5 | OEM-B75-22 | — | — | — |
| A3 | Aux 1 | — | W28 | — | 0.5 | OEM-B74-17 | — | — | — |
| A4 | Aux 2 | — | W29 | — | 0.5 | OEM-B74-18 | — | — | — |
| A5 | Aux 3 | — | W30 | — | 0.5 | OEM-B74-19 | — | — | — |
| A6 | Aux 4 (fuel pump / relays) | — | W31 | — | 0.5 | OEM-B74-20 | — | — | — |
| A7 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| A8 | Ignition 1 | — | W19 | — | 0.5 | OEM-B74-11 | — | — | — |
| A9 | Ignition 2 | — | W20 | — | 0.5 | OEM-B74-12 | — | — | — |
OEM-B74
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 3 (#30) | — | W24 | — | 0.5 | FT450-A-A1 | — | — | — |
| 10 | Cam position (G2) | — | W18 | — | 0.5 | FT450-A-A17 | — | — | — |
| 11 | Ignition 1 (IGT, cyl 1&6) | — | W19 | — | 0.5 | FT450-A-A8 | — | — | — |
| 12 | Ignition 2 (IGT2, cyl 5&2) | — | W20 | — | 0.5 | FT450-A-A9 | — | — | — |
| 13 | Ignition 3 (IGT3, cyl 3&4) | — | W21 | — | 0.5 | FT450-A-A10 | — | — | — |
| 15 | Wastegate VSV (PMC) | — | — | — | — | — | — | — | — |
| 17 | VVT-i OCV - (OCV-) | — | W28 | — | 0.5 | FT450-A-A3 | — | — | — |
| 18 | VVT-i OCV + (OCV+) | — | W29 | — | 0.5 | FT450-A-A4 | — | — | — |
| 19 | ETCS-i clutch - (CL-) | — | W30 | — | 0.5 | FT450-A-A5 | — | — | — |
| 2 | Injector 4 (#40) | — | W25 | — | 0.5 | FT450-A-A2 | — | — | — |
| 20 | ETCS-i clutch + (CL+) | — | W31 | — | 0.5 | FT450-A-A6 | — | — | — |
| 21 | Power ground (E01) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 22 | Crank/cam sensor return (NE-) | — | W10 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Crank position (NE+) | — | W16 | — | 0.5 | FT450-A-A18 | — | — | — |
| 24 | Neutral/park switch (NSW) | — | — | — | — | — | — | — | — |
| 25 | Igniter verification (IGF) | — | — | — | — | — | — | — | — |
| 27 | Knock sensor 2 (KNK2, rear) | — | — | — | — | — | — | — | — |
| 28 | Knock sensor 1 (KNK1, front) | — | — | — | — | — | — | — | — |
| 3 | Injector 5 (#50) | — | W26 | — | 0.5 | FT450-A-A1 | — | — | — |
| 30 | ETCS-i motor shield (GEO1) | — | — | — | — | — | — | — | — |
| 31 | Power ground (E02) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 4 | Injector 6 (#60) | — | W27 | — | 0.5 | FT450-A-A2 | — | — | — |
| 5 | Intake air bypass VSV (VSV1) | — | — | — | — | — | — | — | — |
| 7 | ETCS-i motor - (M-) | — | — | — | — | — | — | — | — |
| 8 | ETCS-i motor + (M+) | — | — | — | — | — | — | — | — |
| 9 | ETCS-i ground (ME01) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-B75
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Mass air flow (VG) | — | — | — | — | — | — | — | — |
| 12 | O2 sensor (OX) | — | — | — | — | — | — | — | — |
| 14 | Coolant temperature (THW) | — | W37 | — | 0.5 | FT450-A-A24 | — | — | — |
| 15 | Accelerator pedal 1 (VPA) | — | W33 | — | 0.5 | FT450-A-A20 | — | — | — |
| 16 | Accelerator pedal 2 (VPA2) | — | W35 | — | 0.5 | FT450-A-A22 | — | — | — |
| 17 | Power ground (E1) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Sensor ground (E2) | — | W11 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | MAF ground (EVG) | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Sensor power (VC) | — | W15 | — | 0.5 | FT450-A-A14 | — | — | — |
| 20 | A/T 2nd-gear indicator (2) | — | — | — | — | — | — | — | — |
| 21 | A/T 1st-gear indicator (L) | — | — | — | — | — | — | — | — |
| 22 | Intake air temperature (THA) | — | W38 | — | 0.5 | FT450-A-A26 | — | — | — |
| 23 | Throttle position 1 (VTA) | — | W34 | — | 0.5 | FT450-A-A21 | — | — | — |
| 24 | Throttle position 2 (VTA2) | — | W36 | — | 0.5 | FT450-A-A25 | — | — | — |
| 3 | Exhaust gas control VSV (VSV2) | — | — | — | — | — | — | — | — |
| 4 | O2 sensor heater (HT) | — | — | — | — | — | — | — | — |
| 5 | Injector 1 (#10) | — | W22 | — | 0.5 | FT450-A-A1 | — | — | — |
| 6 | Injector 2 (#20) | — | W23 | — | 0.5 | FT450-A-A2 | — | — | — |
| 7 | EVAP purge VSV (PRG) | — | — | — | — | — | — | — | — |
| 8 | Main oil pressure switch (MOPS) | — | — | — | — | — | — | — | — |
| 9 | Manifold pressure (PIM) | — | W32 | — | 0.5 | FT450-A-A23 | — | — | — |
OEM-B76
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | A/T shift solenoid 1 (S1) | — | — | — | — | — | — | — | — |
| 10 | OD direct-clutch speed (NCO-) | — | — | — | — | — | — | — | — |
| 11 | No.2 speed sensor return (SP2-) | — | — | — | — | — | — | — | — |
| 12 | Exhaust bypass VSV (VSV3) | — | — | — | — | — | — | — | — |
| 13 | A/T lock-up solenoid - (SLU-) | — | — | — | — | — | — | — | — |
| 14 | A/T accumulator solenoid - (SLN-) | — | — | — | — | — | — | — | — |
| 15 | A/T line-pressure solenoid - (SLT-) | — | — | — | — | — | — | — | — |
| 16 | Fuel pressure-up VSV (FPU) | — | — | — | — | — | — | — | — |
| 17 | A/T oil temperature (OIL) | — | — | — | — | — | — | — | — |
| 2 | A/T shift solenoid 2 (S2) | — | — | — | — | — | — | — | — |
| 3 | A/T shift solenoid 3 (S3) | — | — | — | — | — | — | — | — |
| 4 | OD direct-clutch speed (NCO+) | — | — | — | — | — | — | — | — |
| 5 | No.2 speed sensor (SP2+) | — | — | — | — | — | — | — | — |
| 6 | A/T shift solenoid 4 (S4) | — | — | — | — | — | — | — | — |
| 7 | A/T lock-up solenoid + (SLU+) | — | — | — | — | — | — | — | — |
| 8 | A/T accumulator solenoid + (SLN+) | — | — | — | — | — | — | — | — |
| 9 | A/T line-pressure solenoid + (SLT+) | — | — | — | — | — | — | — | — |
OEM-B77
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | A/C request (AC) | — | — | — | — | — | — | — | — |
| 13 | A/C clutch relay (ACMG) | — | — | — | — | — | — | — | — |
| 14 | A/T shift down (SFTD) | — | — | — | — | — | — | — | — |
| 16 | A/T reverse indicator (R) | — | — | — | — | — | — | — | — |
| 18 | Rear right wheel speed (RRO) | — | — | — | — | — | — | — | — |
| 19 | Rear left wheel speed (RLO) | — | — | — | — | — | — | — | — |
| 2 | Starter signal (STA) | — | — | — | — | — | — | — | — |
| 20 | Tachometer output (TACH) | — | — | — | — | — | — | — | — |
| 21 | ABS active (ABS) | — | — | — | — | — | — | — | — |
| 25 | No.1 speed sensor (SPD) | — | — | — | — | — | — | — | — |
| 26 | Electrical load sense (ELS) | — | — | — | — | — | — | — | — |
| 27 | Road speed (RSPD) | — | — | — | — | — | — | — | — |
| 4 | A/T shift up (SFTU) | — | — | — | — | — | — | — | — |
| 5 | Diagnostic/timing check (TC) | — | — | — | — | — | — | — | — |
| 6 | Stop light switch (STP) | — | — | — | — | — | — | — | — |
| 7 | A/T manual position (3) | — | — | — | — | — | — | — | — |
OEM-B78
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Battery constant (BATT) | — | — | — | — | — | — | — | — |
| 10 | EFI main relay control (M-REL) | — | — | — | — | — | — | — | — |
| 11 | Serial diagnostic (SIL) | — | — | — | — | — | — | — | — |
| 16 | EFI main relay power (+B) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 2 | TRAC snow-mode light (SNOW) | — | — | — | — | — | — | — | — |
| 22 | Switch ground (EC) | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | TRAC snow-mode switch (SNWI) | — | — | — | — | — | — | — | — |
| 4 | Fuel pump diagnostic (DI) | — | — | — | — | — | — | — | — |
| 5 | Fuel pump control (FPC) | — | — | — | — | — | — | — | — |
| 6 | Check-engine light (W) | — | — | — | — | — | — | — | — |
| 7 | ETCS-i power (+BM) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 8 | EFI main relay power (+B2) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Ignition switch (IGSW) | — | — | — | — | — | — | — | — |
OEM-B79
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | TRAC enable light (IND) | — | — | — | — | — | — | — | — |
| 14 | TRAC active light (CIND) | — | — | — | — | — | — | — | — |
| 17 | A/T meter LCD (LPO3) | — | — | — | — | — | — | — | — |
| 18 | A/T meter LCD (SPTL) | — | — | — | — | — | — | — | — |
| 19 | Reverse buzzer (BZ) | — | — | — | — | — | — | — | — |
| 2 | TRAC off switch (MSW) | — | — | — | — | — | — | — | — |
| 3 | A/T meter LCD (LPO1) | — | — | — | — | — | — | — | — |
| 4 | A/T meter LCD (LPO2) | — | — | — | — | — | — | — | — |
| 7 | Front right wheel speed (FRO) | — | — | — | — | — | — | — | — |
| 8 | Front left wheel speed (FLO) | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W10 | — | 0.5 | OEM-B74-22 | — | — | — |
| 1 | — | — | W11 | — | 0.5 | OEM-B75-18 | — | — | — |
| 1 | — | — | W12 | — | 0.5 | OEM-B75-19 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-B78-22 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | FT450-A-A12 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | FT450-A-A18 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-B78-16 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-B78-7 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-B78-8 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | FT450-A-A13 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-B74-21 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-B74-31 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-B74-9 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-B75-17 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | FT450-A-A7 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-B74-1 | Injector 3 (#30) | injector_out | FT450-A-A1 | Injector 1 (Bank A) | injector_out | single_source | |
| OEM-B74-10 | Cam position (G2) | trigger_in | FT450-A-A17 | Phase input (cam) | trigger_in | single_source | |
| OEM-B74-11 | Ignition 1 (IGT, cyl 1&6) | ignition_out | FT450-A-A8 | Ignition 1 | ignition_out | single_source | |
| OEM-B74-12 | Ignition 2 (IGT2, cyl 5&2) | ignition_out | FT450-A-A9 | Ignition 2 | ignition_out | single_source | |
| OEM-B74-13 | Ignition 3 (IGT3, cyl 3&4) | ignition_out | FT450-A-A10 | Ignition 3 | ignition_out | single_source | |
| OEM-B74-15 | Wastegate VSV (PMC) | low_side_out | — | — | — | single_source | |
| OEM-B74-17 | VVT-i OCV - (OCV-) | low_side_out | FT450-A-A3 | Aux 1 | low_side_out | single_source | |
| OEM-B74-18 | VVT-i OCV + (OCV+) | low_side_out | FT450-A-A4 | Aux 2 | low_side_out | single_source | |
| OEM-B74-19 | ETCS-i clutch - (CL-) | low_side_out | FT450-A-A5 | Aux 3 | low_side_out | single_source | |
| OEM-B74-2 | Injector 4 (#40) | injector_out | FT450-A-A2 | Injector 2 (Bank A) | injector_out | single_source | |
| OEM-B74-20 | ETCS-i clutch + (CL+) | low_side_out | FT450-A-A6 | Aux 4 (fuel pump / relays) | low_side_out | single_source | |
| OEM-B74-21 | Power ground (E01) | ground | FT450-A-A7 | Power ground | ground | single_source | |
| OEM-B74-22 | Crank/cam sensor return (NE-) | sensor_ground | FT450-A-A12 + FT450-A-A18 | Signal ground + RPM reference (crank -) | sensor_ground + trigger_in | single_source | |
| OEM-B74-23 | Crank position (NE+) | trigger_in | FT450-A-A12 + FT450-A-A18 | Signal ground + RPM reference (crank -) | sensor_ground + trigger_in | single_source | |
| OEM-B74-24 | Neutral/park switch (NSW) | digital_in | — | — | — | single_source | |
| OEM-B74-25 | Igniter verification (IGF) | digital_in | — | — | — | single_source | |
| OEM-B74-27 | Knock sensor 2 (KNK2, rear) | knock_in | — | — | — | single_source | |
| OEM-B74-28 | Knock sensor 1 (KNK1, front) | knock_in | — | — | — | single_source | |
| OEM-B74-3 | Injector 5 (#50) | injector_out | FT450-A-A1 | Injector 1 (Bank A) | injector_out | single_source | |
| OEM-B74-30 | ETCS-i motor shield (GEO1) | shield | — | — | — | single_source | |
| OEM-B74-31 | Power ground (E02) | ground | FT450-A-A7 | Power ground | ground | single_source | |
| OEM-B74-4 | Injector 6 (#60) | injector_out | FT450-A-A2 | Injector 2 (Bank A) | injector_out | single_source | |
| OEM-B74-5 | Intake air bypass VSV (VSV1) | low_side_out | — | — | — | single_source | |
| OEM-B74-7 | ETCS-i motor - (M-) | hbridge_out | — | — | — | single_source | |
| OEM-B74-8 | ETCS-i motor + (M+) | hbridge_out | — | — | — | single_source | |
| OEM-B74-9 | ETCS-i ground (ME01) | ground | FT450-A-A7 | Power ground | ground | single_source | |
| OEM-B75-10 | Mass air flow (VG) | analog_in | — | — | — | single_source | |
| OEM-B75-12 | O2 sensor (OX) | lambda_nb_in | — | — | — | single_source | |
| OEM-B75-14 | Coolant temperature (THW) | temp_in | FT450-A-A24 | White input 5 (water temp) | temp_in | single_source | |
| OEM-B75-15 | Accelerator pedal 1 (VPA) | analog_in | FT450-A-A20 | White input 1 | analog_in | single_source | |
| OEM-B75-16 | Accelerator pedal 2 (VPA2) | analog_in | FT450-A-A22 | White input 3 (TPS) | analog_in | single_source | |
| OEM-B75-17 | Power ground (E1) | ground | FT450-A-A7 | Power ground | ground | single_source | |
| OEM-B75-18 | Sensor ground (E2) | sensor_ground | FT450-A-A12 + FT450-A-A18 | Signal ground + RPM reference (crank -) | sensor_ground + trigger_in | single_source | |
| OEM-B75-19 | MAF ground (EVG) | sensor_ground | FT450-A-A12 + FT450-A-A18 | Signal ground + RPM reference (crank -) | sensor_ground + trigger_in | single_source | |
| OEM-B75-2 | Sensor power (VC) | vref | FT450-A-A14 | +5V sensor supply | vref | single_source | |
| OEM-B75-20 | A/T 2nd-gear indicator (2) | digital_in | — | — | — | single_source | |
| OEM-B75-21 | A/T 1st-gear indicator (L) | digital_in | — | — | — | single_source | |
| OEM-B75-22 | Intake air temperature (THA) | temp_in | FT450-A-A26 | White input 7 (air temp) | temp_in | single_source | |
| OEM-B75-23 | Throttle position 1 (VTA) | analog_in | FT450-A-A21 | White input 2 | analog_in | single_source | |
| OEM-B75-24 | Throttle position 2 (VTA2) | analog_in | FT450-A-A25 | White input 6 (fuel pressure) | analog_in | single_source | |
| OEM-B75-3 | Exhaust gas control VSV (VSV2) | low_side_out | — | — | — | single_source | |
| OEM-B75-4 | O2 sensor heater (HT) | low_side_out | — | — | — | single_source | |
| OEM-B75-5 | Injector 1 (#10) | injector_out | FT450-A-A1 | Injector 1 (Bank A) | injector_out | single_source | |
| OEM-B75-6 | Injector 2 (#20) | injector_out | FT450-A-A2 | Injector 2 (Bank A) | injector_out | single_source | |
| OEM-B75-7 | EVAP purge VSV (PRG) | low_side_out | — | — | — | single_source | |
| OEM-B75-8 | Main oil pressure switch (MOPS) | digital_in | — | — | — | single_source | |
| OEM-B75-9 | Manifold pressure (PIM) | analog_in | FT450-A-A23 | White input 4 (oil pressure) | analog_in | single_source | |
| OEM-B76-1 | A/T shift solenoid 1 (S1) | low_side_out | — | — | — | single_source | |
| OEM-B76-10 | OD direct-clutch speed (NCO-) | digital_in | — | — | — | single_source | |
| OEM-B76-11 | No.2 speed sensor return (SP2-) | digital_in | — | — | — | single_source | |
| OEM-B76-12 | Exhaust bypass VSV (VSV3) | low_side_out | — | — | — | single_source | |
| OEM-B76-13 | A/T lock-up solenoid - (SLU-) | low_side_out | — | — | — | single_source | |
| OEM-B76-14 | A/T accumulator solenoid - (SLN-) | low_side_out | — | — | — | single_source | |
| OEM-B76-15 | A/T line-pressure solenoid - (SLT-) | low_side_out | — | — | — | single_source | |
| OEM-B76-16 | Fuel pressure-up VSV (FPU) | low_side_out | — | — | — | single_source | |
| OEM-B76-17 | A/T oil temperature (OIL) | temp_in | — | — | — | single_source | |
| OEM-B76-2 | A/T shift solenoid 2 (S2) | low_side_out | — | — | — | single_source | |
| OEM-B76-3 | A/T shift solenoid 3 (S3) | low_side_out | — | — | — | single_source | |
| OEM-B76-4 | OD direct-clutch speed (NCO+) | digital_in | — | — | — | single_source | |
| OEM-B76-5 | No.2 speed sensor (SP2+) | digital_in | — | — | — | single_source | |
| OEM-B76-6 | A/T shift solenoid 4 (S4) | low_side_out | — | — | — | single_source | |
| OEM-B76-7 | A/T lock-up solenoid + (SLU+) | low_side_out | — | — | — | single_source | |
| OEM-B76-8 | A/T accumulator solenoid + (SLN+) | low_side_out | — | — | — | single_source | |
| OEM-B76-9 | A/T line-pressure solenoid + (SLT+) | low_side_out | — | — | — | single_source | |
| OEM-B77-1 | A/C request (AC) | digital_in | — | — | — | single_source | |
| OEM-B77-13 | A/C clutch relay (ACMG) | low_side_out | — | — | — | single_source | |
| OEM-B77-14 | A/T shift down (SFTD) | digital_in | — | — | — | single_source | |
| OEM-B77-16 | A/T reverse indicator (R) | digital_in | — | — | — | single_source | |
| OEM-B77-18 | Rear right wheel speed (RRO) | digital_in | — | — | — | single_source | |
| OEM-B77-19 | Rear left wheel speed (RLO) | digital_in | — | — | — | single_source | |
| OEM-B77-2 | Starter signal (STA) | digital_in | — | — | — | single_source | |
| OEM-B77-20 | Tachometer output (TACH) | tacho_out | — | — | — | single_source | |
| OEM-B77-21 | ABS active (ABS) | digital_in | — | — | — | single_source | |
| OEM-B77-25 | No.1 speed sensor (SPD) | digital_in | — | — | — | single_source | |
| OEM-B77-26 | Electrical load sense (ELS) | digital_in | — | — | — | single_source | |
| OEM-B77-27 | Road speed (RSPD) | digital_in | — | — | — | single_source | |
| OEM-B77-4 | A/T shift up (SFTU) | digital_in | — | — | — | single_source | |
| OEM-B77-5 | Diagnostic/timing check (TC) | digital_in | — | — | — | single_source | |
| OEM-B77-6 | Stop light switch (STP) | digital_in | — | — | — | single_source | |
| OEM-B77-7 | A/T manual position (3) | digital_in | — | — | — | single_source | |
| OEM-B78-1 | Battery constant (BATT) | power_in | — | — | — | single_source | |
| OEM-B78-10 | EFI main relay control (M-REL) | low_side_out | — | — | — | single_source | |
| OEM-B78-11 | Serial diagnostic (SIL) | serial | — | — | — | single_source | |
| OEM-B78-16 | EFI main relay power (+B) | power_in | FT450-A-A13 | +12V switched | power_in | single_source | |
| OEM-B78-2 | TRAC snow-mode light (SNOW) | low_side_out | — | — | — | single_source | |
| OEM-B78-22 | Switch ground (EC) | sensor_ground | FT450-A-A12 + FT450-A-A18 | Signal ground + RPM reference (crank -) | sensor_ground + trigger_in | single_source | |
| OEM-B78-3 | TRAC snow-mode switch (SNWI) | digital_in | — | — | — | single_source | |
| OEM-B78-4 | Fuel pump diagnostic (DI) | digital_in | — | — | — | single_source | |
| OEM-B78-5 | Fuel pump control (FPC) | low_side_out | — | — | — | single_source | |
| OEM-B78-6 | Check-engine light (W) | low_side_out | — | — | — | single_source | |
| OEM-B78-7 | ETCS-i power (+BM) | power_in | FT450-A-A13 | +12V switched | power_in | single_source | |
| OEM-B78-8 | EFI main relay power (+B2) | power_in | FT450-A-A13 | +12V switched | power_in | single_source | |
| OEM-B78-9 | Ignition switch (IGSW) | digital_in | — | — | — | single_source | |
| OEM-B79-1 | TRAC enable light (IND) | low_side_out | — | — | — | single_source | |
| OEM-B79-14 | TRAC active light (CIND) | low_side_out | — | — | — | single_source | |
| OEM-B79-17 | A/T meter LCD (LPO3) | low_side_out | — | — | — | single_source | |
| OEM-B79-18 | A/T meter LCD (SPTL) | low_side_out | — | — | — | single_source | |
| OEM-B79-19 | Reverse buzzer (BZ) | low_side_out | — | — | — | single_source | |
| OEM-B79-2 | TRAC off switch (MSW) | digital_in | — | — | — | single_source | |
| OEM-B79-3 | A/T meter LCD (LPO1) | low_side_out | — | — | — | single_source | |
| OEM-B79-4 | A/T meter LCD (LPO2) | low_side_out | — | — | — | single_source | |
| OEM-B79-7 | Front right wheel speed (FRO) | digital_in | — | — | — | single_source | |
| OEM-B79-8 | Front left wheel speed (FLO) | digital_in | — | — | — | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-B78-16 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B) | — | |
| W2 | OEM-B78-7 | SP-14V-1 | 0.85 | no route | ETCS-i power (+BM) | — | |
| W3 | OEM-B78-8 | SP-14V-1 | 0.85 | no route | EFI main relay power (+B2) | — | |
| W4 | SP-14V-1 | FT450-A-A13 | 0.85 | no route | +12V switched | — | |
| W5 | OEM-B74-21 | SP-GND-1 | 0.85 | no route | Power ground (E01) | — | |
| W6 | OEM-B74-31 | SP-GND-1 | 0.85 | no route | Power ground (E02) | — | |
| W7 | OEM-B74-9 | SP-GND-1 | 0.85 | no route | ETCS-i ground (ME01) | — | |
| W8 | OEM-B75-17 | SP-GND-1 | 0.85 | no route | Power ground (E1) | — | |
| W9 | SP-GND-1 | FT450-A-A7 | 0.85 | no route | Power ground | — | |
| W10 | OEM-B74-22 | SP-0V-1 | 0.5 | no route | Crank/cam sensor return (NE-) | — | |
| W11 | OEM-B75-18 | SP-0V-1 | 0.5 | no route | Sensor ground (E2) | — | |
| W12 | OEM-B75-19 | SP-0V-1 | 0.5 | no route | MAF ground (EVG) | — | |
| W13 | OEM-B78-22 | SP-0V-1 | 0.5 | no route | Switch ground (EC) | — | |
| W14 | SP-0V-1 | FT450-A-A12 | 0.5 | no route | Signal ground | — | |
| W15 | OEM-B75-2 | FT450-A-A14 | 0.5 | no route | Sensor power (VC) | — | |
| W16 | OEM-B74-23 | FT450-A-A18 | 0.5 | no route | Crank position (NE+) | — | |
| W17 | SP-0V-1 | FT450-A-A18 | 0.5 | no route | RPM reference (crank -) | — | |
| W18 | OEM-B74-10 | FT450-A-A17 | 0.5 | no route | Cam position (G2) | — | |
| W19 | OEM-B74-11 | FT450-A-A8 | 0.5 | no route | Ignition 1 (IGT, cyl 1&6) | — | |
| W20 | OEM-B74-12 | FT450-A-A9 | 0.5 | no route | Ignition 2 (IGT2, cyl 5&2) | — | |
| W21 | OEM-B74-13 | FT450-A-A10 | 0.5 | no route | Ignition 3 (IGT3, cyl 3&4) | — | |
| W22 | OEM-B75-5 | FT450-A-A1 | 0.5 | no route | Injector 1 (#10) | — | |
| W23 | OEM-B75-6 | FT450-A-A2 | 0.5 | no route | Injector 2 (#20) | — | |
| W24 | OEM-B74-1 | FT450-A-A1 | 0.5 | no route | Injector 3 (#30) | — | |
| W25 | OEM-B74-2 | FT450-A-A2 | 0.5 | no route | Injector 4 (#40) | — | |
| W26 | OEM-B74-3 | FT450-A-A1 | 0.5 | no route | Injector 5 (#50) | — | |
| W27 | OEM-B74-4 | FT450-A-A2 | 0.5 | no route | Injector 6 (#60) | — | |
| W28 | OEM-B74-17 | FT450-A-A3 | 0.5 | no route | VVT-i OCV - (OCV-) | — | |
| W29 | OEM-B74-18 | FT450-A-A4 | 0.5 | no route | VVT-i OCV + (OCV+) | — | |
| W30 | OEM-B74-19 | FT450-A-A5 | 0.5 | no route | ETCS-i clutch - (CL-) | — | |
| W31 | OEM-B74-20 | FT450-A-A6 | 0.5 | no route | ETCS-i clutch + (CL+) | — | |
| W32 | OEM-B75-9 | FT450-A-A23 | 0.5 | no route | Manifold pressure (PIM) | — | |
| W33 | OEM-B75-15 | FT450-A-A20 | 0.5 | no route | Accelerator pedal 1 (VPA) | — | |
| W34 | OEM-B75-23 | FT450-A-A21 | 0.5 | no route | Throttle position 1 (VTA) | — | |
| W35 | OEM-B75-16 | FT450-A-A22 | 0.5 | no route | Accelerator pedal 2 (VPA2) | — | |
| W36 | OEM-B75-24 | FT450-A-A25 | 0.5 | no route | Throttle position 2 (VTA2) | — | |
| W37 | OEM-B75-14 | FT450-A-A24 | 0.5 | no route | Coolant temperature (THW) | — | |
| W38 | OEM-B75-22 | FT450-A-A26 | 0.5 | no route | Intake air temperature (THA) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (8)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | INJECTOR_BALLAST | FT450 | The 2JZ-GTE injectors (2JZ-GTE fuel injector) are low-impedance, but FT450 drives saturated (high-Z) injectors only. Add a ballast resistor pack in series with each injector, or use an ECU with low-Z / peak-and-hold injector drivers. |
| error | NET_MERGED | FT450-A-A1 + OEM-B74-1 + OEM-B74-3 + OEM-B75-5 | 3 different OEM functions share one net: OEM-B74-1 Injector 3 (#30); OEM-B74-3 Injector 5 (#50); OEM-B75-5 Injector 1 (#10) |
| error | NET_MERGED | FT450-A-A2 + OEM-B74-2 + OEM-B74-4 + OEM-B75-6 | 3 different OEM functions share one net: OEM-B74-2 Injector 4 (#40); OEM-B74-4 Injector 6 (#60); OEM-B75-6 Injector 2 (#20) |
| error | REQUIRED_UNMAPPED | OEM-B74-7 | Required OEM function "ETCS-i motor - (M-)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-B74-8 | Required OEM function "ETCS-i motor + (M+)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-B78-9 | Required OEM function "Ignition switch (IGSW)" (digital_in) is not connected to the new ECU. |
| info | NET_FAMILY | FT450-A-A12 ↔ FT450-A-A18 | FT450-A-A12 "Signal ground" [sensor_ground] is wired to FT450-A-A18 "RPM reference (crank -)" [trigger_in]. Trigger return tied to sensor/trigger ground: correct for single-ended trigger inputs. |
| info | UNMAPPED | OEM | 65 optional OEM pins are not mapped: OEM-B74-15 Wastegate VSV (PMC); OEM-B74-24 Neutral/park switch (NSW); OEM-B74-25 Igniter verification (IGF); OEM-B74-27 Knock sensor 2 (KNK2, rear); OEM-B74-28 Knock sensor 1 (KNK1, front); OEM-B74-30 ETCS-i motor shield (GEO1); OEM-B74-5 Intake air bypass VSV (VSV1); OEM-B75-10 Mass air flow (VG); OEM-B75-12 O2 sensor (OX); OEM-B75-20 A/T 2nd-gear indicator (2); OEM-B75-21 A/T 1st-gear indicator (L); OEM-B75-3 Exhaust gas control VSV (VSV2); OEM-B75-4 O2 sensor heater (HT); OEM-B75-7 EVAP purge VSV (PRG); OEM-B75-8 Main oil pressure switch (MOPS); OEM-B76-1 A/T shift solenoid 1 (S1); OEM-B76-10 OD direct-clutch speed (NCO-); OEM-B76-11 No.2 speed sensor return (SP2-); OEM-B76-12 Exhaust bypass VSV (VSV3); OEM-B76-13 A/T lock-up solenoid - (SLU-); OEM-B76-14 A/T accumulator solenoid - (SLN-); OEM-B76-15 A/T line-pressure solenoid - (SLT-); OEM-B76-16 Fuel pressure-up VSV (FPU); OEM-B76-17 A/T oil temperature (OIL); OEM-B76-2 A/T shift solenoid 2 (S2); OEM-B76-3 A/T shift solenoid 3 (S3); OEM-B76-4 OD direct-clutch speed (NCO+); OEM-B76-5 No.2 speed sensor (SP2+); OEM-B76-6 A/T shift solenoid 4 (S4); OEM-B76-7 A/T lock-up solenoid + (SLU+); OEM-B76-8 A/T accumulator solenoid + (SLN+); OEM-B76-9 A/T line-pressure solenoid + (SLT+); OEM-B77-1 A/C request (AC); OEM-B77-13 A/C clutch relay (ACMG); OEM-B77-14 A/T shift down (SFTD); OEM-B77-16 A/T reverse indicator (R); OEM-B77-18 Rear right wheel speed (RRO); OEM-B77-19 Rear left wheel speed (RLO); OEM-B77-2 Starter signal (STA); OEM-B77-20 Tachometer output (TACH); OEM-B77-21 ABS active (ABS); OEM-B77-25 No.1 speed sensor (SPD); OEM-B77-26 Electrical load sense (ELS); OEM-B77-27 Road speed (RSPD); OEM-B77-4 A/T shift up (SFTU); OEM-B77-5 Diagnostic/timing check (TC); OEM-B77-6 Stop light switch (STP); OEM-B77-7 A/T manual position (3); OEM-B78-10 EFI main relay control (M-REL); OEM-B78-11 Serial diagnostic (SIL); OEM-B78-2 TRAC snow-mode light (SNOW); OEM-B78-3 TRAC snow-mode switch (SNWI); OEM-B78-4 Fuel pump diagnostic (DI); OEM-B78-5 Fuel pump control (FPC); OEM-B78-6 Check-engine light (W); OEM-B79-1 TRAC enable light (IND); OEM-B79-14 TRAC active light (CIND); OEM-B79-17 A/T meter LCD (LPO3); OEM-B79-18 A/T meter LCD (SPTL); OEM-B79-19 Reverse buzzer (BZ); OEM-B79-2 TRAC off switch (MSW); OEM-B79-3 A/T meter LCD (LPO1); OEM-B79-4 A/T meter LCD (LPO2); OEM-B79-7 Front right wheel speed (FRO); OEM-B79-8 Front left wheel speed (FLO) |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-B78-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: needs add-on. Resolve these before building: - No drive-by-wire; needs a cable-throttle conversion or an external DBW controller - No knock input; the stock knock sensor would be unused - Only 4 ignition outputs for 6 cylinders: wasted spark (pair coils per firing order) Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-B78 9: Ignition switch (IGSW): key-on 12 V sense — optional in a swap (the main relay is energized from keyed 12 V, not from this pin); FuelTech FT450 has no dedicated key-on input - OEM-B74 7: ETCS-i motor - (M-): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-B74 8: ETCS-i motor + (M+): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand Not wired: - OEM-B78 1: Battery constant (BATT): FuelTech FT450 has no battery-constant input; not needed - OEM-B74 28: Knock sensor 1 (KNK1, front): no free knock input on FuelTech FT450 - OEM-B74 27: Knock sensor 2 (KNK2, rear): no free knock input on FuelTech FT450 - OEM-B74 30: ETCS-i motor shield (GEO1): no shield pin on FuelTech FT450 - OEM-B77 13: A/C clutch relay (ACMG): no free relay_control/low_side/heater_low_side/ls_hs/injector rated ≥ 0.2 A on FuelTech FT450 - OEM-B78 10: EFI main relay control (M-REL): no free relay_control/low_side/heater_low_side/ls_hs/injector rated ≥ 0.2 A on FuelTech FT450 - OEM-B75 4: O2 sensor heater (HT): no free heater_low_side/low_side/relay_control/ls_hs/injector on FuelTech FT450 - OEM-B76 1: A/T shift solenoid 1 (S1): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 2: A/T shift solenoid 2 (S2): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 3: A/T shift solenoid 3 (S3): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 6: A/T shift solenoid 4 (S4): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B74 15: Wastegate VSV (PMC): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B74 5: Intake air bypass VSV (VSV1): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B75 3: Exhaust gas control VSV (VSV2): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B75 7: EVAP purge VSV (PRG): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 12: Exhaust bypass VSV (VSV3): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 13: A/T lock-up solenoid - (SLU-): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 14: A/T accumulator solenoid - (SLN-): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 15: A/T line-pressure solenoid - (SLT-): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 16: Fuel pressure-up VSV (FPU): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 7: A/T lock-up solenoid + (SLU+): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 8: A/T accumulator solenoid + (SLN+): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B76 9: A/T line-pressure solenoid + (SLT+): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B78 2: TRAC snow-mode light (SNOW): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B78 5: Fuel pump control (FPC): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B78 6: Check-engine light (W): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B79 1: TRAC enable light (IND): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B79 14: TRAC active light (CIND): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B79 17: A/T meter LCD (LPO3): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B79 18: A/T meter LCD (SPTL): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B79 19: Reverse buzzer (BZ): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B79 3: A/T meter LCD (LPO1): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B79 4: A/T meter LCD (LPO2): no free low_side/relay_control/heater_low_side/ls_hs/injector on FuelTech FT450 - OEM-B77 20: Tachometer output (TACH): no free tacho/frequency_out/low_side/ls_hs on FuelTech FT450 - OEM-B75 10: Mass air flow (VG): no free maf/analog_0_5 on FuelTech FT450 - OEM-B75 12: O2 sensor (OX): no free o2_narrowband/analog_0_5 on FuelTech FT450 - OEM-B76 17: A/T oil temperature (OIL): no free thermistor/analog_0_5 on FuelTech FT450 - OEM-B77 25: No.1 speed sensor (SPD): no free frequency_in/switch_in on FuelTech FT450 - OEM-B76 11: No.2 speed sensor return (SP2-): no free frequency_in/switch_in on FuelTech FT450 - OEM-B76 5: No.2 speed sensor (SP2+): no free frequency_in/switch_in on FuelTech FT450 - OEM-B74 25: Igniter verification (IGF): no free frequency_in/switch_in on FuelTech FT450 - OEM-B76 10: OD direct-clutch speed (NCO-): no free frequency_in/switch_in on FuelTech FT450 - OEM-B76 4: OD direct-clutch speed (NCO+): no free frequency_in/switch_in on FuelTech FT450 - OEM-B77 18: Rear right wheel speed (RRO): no free frequency_in/switch_in on FuelTech FT450 - OEM-B77 19: Rear left wheel speed (RLO): no free frequency_in/switch_in on FuelTech FT450 - OEM-B77 27: Road speed (RSPD): no free frequency_in/switch_in on FuelTech FT450 - OEM-B78 4: Fuel pump diagnostic (DI): no free frequency_in/switch_in on FuelTech FT450 - OEM-B79 7: Front right wheel speed (FRO): no free frequency_in/switch_in on FuelTech FT450 - OEM-B79 8: Front left wheel speed (FLO): no free frequency_in/switch_in on FuelTech FT450 - OEM-B75 21: A/T 1st-gear indicator (L): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B75 20: A/T 2nd-gear indicator (2): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B74 24: Neutral/park switch (NSW): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B75 8: Main oil pressure switch (MOPS): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 1: A/C request (AC): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 14: A/T shift down (SFTD): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 16: A/T reverse indicator (R): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 2: Starter signal (STA): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 21: ABS active (ABS): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 26: Electrical load sense (ELS): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 4: A/T shift up (SFTU): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 5: Diagnostic/timing check (TC): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 6: Stop light switch (STP): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B77 7: A/T manual position (3): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B78 3: TRAC snow-mode switch (SNWI): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B79 2: TRAC off switch (MSW): no free switch_in/frequency_in/analog_0_5 on FuelTech FT450 - OEM-B78 11: Serial diagnostic (SIL): no free k_line on FuelTech FT450
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | FuelTech FT450/FT550 ready harness manual (4 & 6 cylinder) — FT450 Connector A pinout | http://ftmanager.fueltech.com.br/downloads/manual/Portugues/Chicote_pronto_FT450-FT550.pdf | — | — | — |
| 3 | community_copy | wilbo666: 2JZ-GTE VVTi JZA80 Supra Engine Wiring (ECU pinout, B74-B79) | http://wilbo666.pbworks.com/w/page/57949268/2JZ-GTE%20VVTi%20JZA80%20Supra%20Engine%20Wiring | — | — | — |