BMW 3 Series E46 M3 2001–2006 (S54) → Motorsport Electronics ME221 (auto)
BMW 3 Series E46 M3 2001–2006 (S54) — Motorsport Electronics — ME221
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-11
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 7: read the Findings page before cutting any wire |
| Size of the job | 61 wires · 10 connectors · 1 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X60001-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-X60003-4 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-X60003-5 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | SP-14V-1 | ME221-C1-15 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | SP-14V-1 | ME221-C1-64 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-X60001-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-X60001-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-X60001-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-X60001-9 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-X60005-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | ME221-C1-10 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | ME221-C1-61 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | ME221-C1-89 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | ME221-C1-90 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X60003-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X60003-35 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X60003-36 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X60003-37 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X60003-45 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X60003-49 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X60004-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X60004-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | SP-0V-1 | ME221-C1-52 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | ME221-C1-84 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-X60004-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-X60004-9 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-5V1-1 | ME221-C1-45 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-X60003-3 | ME221-C1-80 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-X60003-30 | ME221-C1-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-X60003-29 | ME221-C1-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X60003-33 | ME221-C1-53 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X60005-6 | ME221-C1-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X60005-7 | ME221-C1-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X60005-4 | ME221-C1-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X60005-8 | ME221-C1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X60003-13 | ME221-C1-63 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X60003-6 | ME221-C1-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X60003-26 | ME221-C1-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X60003-7 | ME221-C1-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X60003-11 | ME221-C1-63 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X60003-8 | ME221-C1-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X60003-1 | ME221-C1-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X60003-32 | ME221-C1-56 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X60004-8 | ME221-C1-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X60003-31 | ME221-C1-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X60003-28 | ME221-C1-86 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X60001-1 | ME221-C1-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X60002-23 | ME221-C1-42 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X60004-10 | ME221-C1-72 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-X60002-1 | ME221-C1-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X60002-12 | ME221-C1-73 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-X60002-2 | ME221-C1-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X60002-6 | ME221-C1-74 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X60003-10 | ME221-C1-44 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X60003-12 | ME221-C1-69 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X60003-21 | ME221-C1-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X60003-9 | ME221-C1-43 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X60003-27 | ME221-C1-57 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X60003-16 | ME221-C1-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X60003-50 | ME221-C1-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | ME221-C1-15 | ME221-C1-10 | open (OL) | +12 V supply must not touch power ground | |
| 2 | ME221-C1-15 | ME221-C1-52 | open (OL) | +12 V supply must not touch sensor ground | |
| 3 | ME221-C1-10 | ME221-C1-45 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | ME221-C1-15 | ME221-C1-45 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 5 | ME221-C1-52 | ME221-C1-45 | open (OL) | sensor ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
ME221-C1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | COIL 4 | — | W36 | — | 0.5 | OEM-X60005-8 | — | — | — |
| 10 | GROUND CHASSIS | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | LOW SIDE 2 | — | W53 | — | 0.5 | OEM-X60002-2 | — | — | — |
| 14 | LSU +12V | — | — | — | — | — | — | — | — |
| 15 | IGN +12V | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 16 | LSU HEATER -VE | — | W51 | — | 0.5 | OEM-X60002-1 | — | — | — |
| 17 | ANA VOLT 3 | — | W45 | — | 0.5 | OEM-X60004-8 | — | — | — |
| 18 | ANA VOLT 4 | — | W46 | — | 0.5 | OEM-X60003-31 | — | — | — |
| 19 | LSU UN | — | — | — | — | — | — | — | — |
| 2 | COIL 3 | — | W35 | — | 0.5 | OEM-X60005-4 | — | — | — |
| 20 | LSU VM | — | — | — | — | — | — | — | — |
| 21 | CAN 1 HIGH | — | — | — | — | — | — | — | — |
| 22 | CAM A VR+ | — | W30 | — | 0.5 | OEM-X60003-30 | — | — | — |
| 23 | CAM A VR- | — | W31 | — | 0.5 | OEM-X60003-29 | — | — | — |
| 24 | SERIAL 1 GROUND | — | — | — | — | — | — | — | — |
| 25 | SERIAL 1 TX | — | — | — | — | — | — | — | — |
| 26 | ANA VOLT 1 | — | W43 | — | 0.5 | OEM-X60003-1 | — | — | — |
| 3 | INJECTOR 4 | — | W40 | — | 0.5 | OEM-X60003-7 | — | — | — |
| 31 | COIL 2 | — | W34 | — | 0.5 | OEM-X60005-7 | — | — | — |
| 32 | COIL 1 | — | W33 | — | 0.5 | OEM-X60005-6 | — | — | — |
| 33 | INJECTOR 3 | — | W39 | — | 0.5 | OEM-X60003-26 | — | — | — |
| 35 | USB D+ | — | — | — | — | — | — | — | — |
| 36 | USB D- | — | — | — | — | — | — | — | — |
| 37 | LOW SIDE RELAY 11 | — | W48 | — | 0.5 | OEM-X60001-1 | — | — | — |
| 38 | USB VBUS | — | — | — | — | — | — | — | — |
| 39 | LOW SIDE 6 | — | W57 | — | 0.5 | OEM-X60003-21 | — | — | — |
| 4 | INJECTOR 2 | — | W38 | — | 0.5 | OEM-X60003-6 | — | — | — |
| 4 | INJECTOR 2 | — | W42 | — | 0.5 | OEM-X60003-8 | — | — | — |
| 41 | USB GROUND | — | — | — | — | — | — | — | — |
| 42 | LOW SIDE RELAY 12 | — | W49 | — | 0.5 | OEM-X60002-23 | — | — | — |
| 43 | LOW SIDE RELAY 14 | — | W58 | — | 0.5 | OEM-X60003-9 | — | — | — |
| 44 | LOW SIDE 4 | — | W55 | — | 0.5 | OEM-X60003-10 | — | — | — |
| 45 | 5V REF | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
| 46 | 5V REF | — | — | — | — | — | — | — | — |
| 49 | LSU IA | — | — | — | — | — | — | — | — |
| 50 | LSU IP | — | — | — | — | — | — | — | — |
| 51 | CAN 1 LOW | — | — | — | — | — | — | — | — |
| 52 | SENSORS GROUND | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 53 | KNOCK 1 SIGNAL | — | W32 | — | 0.5 | OEM-X60003-33 | — | — | — |
| 55 | SERIAL 1 RX | — | — | — | — | — | — | — | — |
| 56 | ANA VOLT 2 | — | W44 | — | 0.5 | OEM-X60003-32 | — | — | — |
| 57 | ANA TEMP 2 | — | W59 | — | 0.5 | OEM-X60003-27 | — | — | — |
| 6 | DIG_IN 1 | — | W60 | — | 0.5 | OEM-X60003-16 | — | — | — |
| 61 | GROUND | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 63 | INJECTOR 1 | — | W37 | — | 0.5 | OEM-X60003-13 | — | — | — |
| 63 | INJECTOR 1 | — | W41 | — | 0.5 | OEM-X60003-11 | — | — | — |
| 64 | VBAT | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
| 67 | Stepper 1 / A1 | — | — | — | — | — | — | — | — |
| 68 | Stepper 2 / A2 | — | — | — | — | — | — | — | — |
| 69 | LOW SIDE 5 | — | W56 | — | 0.5 | OEM-X60003-12 | — | — | — |
| 7 | DIG_IN 2 | — | W61 | — | 0.5 | OEM-X60003-50 | — | — | — |
| 70 | Stepper 3 / B1 | — | — | — | — | — | — | — | — |
| 71 | Stepper 4 / B2 | — | — | — | — | — | — | — | — |
| 72 | LOW SIDE RELAY 13 | — | W50 | — | 0.5 | OEM-X60004-10 | — | — | — |
| 73 | LOW SIDE 1 | — | W52 | — | 0.5 | OEM-X60002-12 | — | — | — |
| 74 | LOW SIDE 3 | — | W54 | — | 0.5 | OEM-X60002-6 | — | — | — |
| 76 | 5V REF | — | — | — | — | — | — | — | — |
| 79 | TACHOMETER | — | — | — | — | — | — | — | — |
| 80 | CRANK VR+ | — | W29 | — | 0.5 | OEM-X60003-3 | — | — | — |
| 81 | CRANK VR- | — | — | — | — | — | — | — | — |
| 84 | Sensor Ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 86 | ANA TEMP 1 | — | W47 | — | 0.5 | OEM-X60003-28 | — | — | — |
| 89 | GROUND | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 90 | GROUND | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-X60001
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector relay control | — | W48 | — | 0.5 | ME221-C1-37 | — | — | — |
| 2 | DBW output-stage supply (P_DKSM+) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Power ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Battery constant (terminal 30) | — | — | — | — | — | — | — | — |
| 8 | ECU main power (terminal 87 via main relay) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | DBW output-stage return (P_DKSM-) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-X60002
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | O2 sensor heater, front 1 (pre-cat) | — | W51 | — | 0.5 | ME221-C1-16 | — | — | — |
| 12 | O2 sensor heater, rear 2 (post-cat) | — | W52 | — | 0.5 | ME221-C1-73 | — | — | — |
| 14 | O2 sensor signal, rear 2 (post-cat) | — | — | — | — | — | — | — | — |
| 16 | O2 sensor signal, rear 1 (post-cat) | — | — | — | — | — | — | — | — |
| 2 | O2 sensor heater, front 2 (pre-cat) | — | W53 | — | 0.5 | ME221-C1-12 | — | — | — |
| 23 | Main relay control | — | W49 | — | 0.5 | ME221-C1-42 | — | — | — |
| 6 | O2 sensor heater, rear 1 (post-cat) | — | W54 | — | 0.5 | ME221-C1-74 | — | — | — |
OEM-X60003
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Mass air flow (MAF) signal | — | W43 | — | 0.5 | ME221-C1-26 | — | — | — |
| 10 | VANOS intake solenoid | — | W55 | — | 0.5 | ME221-C1-44 | — | — | — |
| 11 | Injector cylinder 5 | — | W41 | — | 0.5 | ME221-C1-63 | — | — | — |
| 12 | Map-controlled thermostat | — | W56 | — | 0.5 | ME221-C1-69 | — | — | — |
| 13 | Injector cylinder 1 | — | W37 | — | 0.5 | ME221-C1-63 | — | — | — |
| 15 | Throttle ground | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Oil pressure switch | — | W60 | — | 0.5 | ME221-C1-6 | — | — | — |
| 21 | Evap purge valve | — | W57 | — | 0.5 | ME221-C1-39 | — | — | — |
| 22 | Idle speed control, close | — | — | — | — | — | — | — | — |
| 23 | Idle speed control, open | — | — | — | — | — | — | — | — |
| 26 | Injector cylinder 3 | — | W39 | — | 0.5 | ME221-C1-33 | — | — | — |
| 27 | Intake air temperature (IAT) | — | W59 | — | 0.5 | ME221-C1-57 | — | — | — |
| 28 | Engine coolant temperature (ECT) | — | W47 | — | 0.5 | ME221-C1-86 | — | — | — |
| 29 | Intake camshaft position | — | W31 | — | 0.5 | ME221-C1-23 | — | — | — |
| 3 | Crankshaft position | — | W29 | — | 0.5 | ME221-C1-80 | — | — | — |
| 30 | Exhaust camshaft position | — | W30 | — | 0.5 | ME221-C1-22 | — | — | — |
| 31 | Throttle position sensor 2 | — | W46 | — | 0.5 | ME221-C1-18 | — | — | — |
| 32 | Throttle position sensor 1 | — | W44 | — | 0.5 | ME221-C1-56 | — | — | — |
| 33 | Knock sensor 1 | — | W32 | — | 0.5 | ME221-C1-53 | — | — | — |
| 34 | Knock sensor 2 | — | — | — | — | — | — | — | — |
| 35 | ECT ground | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 36 | Intake camshaft ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 37 | Crankshaft ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | MAF supply | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 42 | Throttle motor drive 1 (H-bridge) | — | — | — | — | — | — | — | — |
| 43 | Throttle motor drive 2 (H-bridge) | — | — | — | — | — | — | — | — |
| 44 | Engine oil temperature | — | — | — | — | — | — | — | — |
| 45 | Oil temperature ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 46 | Knock sensor 3 | — | — | — | — | — | — | — | — |
| 47 | Knock sensor 4 | — | — | — | — | — | — | — | — |
| 49 | Exhaust camshaft ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 5 | Throttle (EDK/ITB) supply | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 50 | Oil level switch | — | W61 | — | 0.5 | ME221-C1-7 | — | — | — |
| 6 | Injector cylinder 2 | — | W38 | — | 0.5 | ME221-C1-4 | — | — | — |
| 7 | Injector cylinder 4 | — | W40 | — | 0.5 | ME221-C1-3 | — | — | — |
| 8 | Injector cylinder 6 | — | W42 | — | 0.5 | ME221-C1-4 | — | — | — |
| 9 | VANOS exhaust solenoid | — | W58 | — | 0.5 | ME221-C1-43 | — | — | — |
OEM-X60004
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Fuel pump relay control | — | W50 | — | 0.5 | ME221-C1-72 | — | — | — |
| 12 | Pedal ground 2 | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | Pedal position signal 2 | — | — | — | — | — | — | — | — |
| 14 | Pedal +5V supply 2 | — | W26 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | Pedal ground 1 | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Pedal position signal 1 | — | W45 | — | 0.5 | ME221-C1-17 | — | — | — |
| 9 | Pedal +5V supply 1 | — | W27 | — | 0.5 | SP-5V1-1 | — | — | — |
OEM-X60005
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil 5 | — | — | — | — | — | — | — | — |
| 4 | Ignition coil 3 | — | W35 | — | 0.5 | ME221-C1-2 | — | — | — |
| 5 | Ignition ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Ignition coil 1 | — | W33 | — | 0.5 | ME221-C1-32 | — | — | — |
| 7 | Ignition coil 2 | — | W34 | — | 0.5 | ME221-C1-31 | — | — | — |
| 8 | Ignition coil 4 | — | W36 | — | 0.5 | ME221-C1-1 | — | — | — |
| 9 | Ignition coil 6 | — | — | — | — | — | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W16 | — | 0.5 | OEM-X60003-15 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-X60003-35 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X60003-36 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X60003-37 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X60003-45 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X60003-49 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-X60004-12 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-X60004-7 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | ME221-C1-52 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | ME221-C1-84 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X60001-2 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X60001-8 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-X60003-4 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-X60003-5 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | ME221-C1-15 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | ME221-C1-64 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W26 | — | 0.5 | OEM-X60004-14 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | OEM-X60004-9 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | ME221-C1-45 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W7 | — | 0.85 | OEM-X60001-4 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-X60001-5 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-X60001-6 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-X60001-9 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-X60005-5 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | ME221-C1-10 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | ME221-C1-61 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | ME221-C1-89 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | ME221-C1-90 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X60001-1 | Injector relay control | low_side_out | ME221-C1-37 | LOW SIDE RELAY 11 | low_side_out | corroborated | |
| OEM-X60001-2 | DBW output-stage supply (P_DKSM+) | power_in | ME221-C1-15 + ME221-C1-64 | IGN +12V + VBAT | power_in | single_source | |
| OEM-X60001-4 | Power ground | ground | ME221-C1-10 + ME221-C1-61 + ME221-C1-89 + ME221-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X60001-5 | Power ground | ground | ME221-C1-10 + ME221-C1-61 + ME221-C1-89 + ME221-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X60001-6 | Power ground | ground | ME221-C1-10 + ME221-C1-61 + ME221-C1-89 + ME221-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X60001-7 | Battery constant (terminal 30) | power_in | — | — | — | corroborated | |
| OEM-X60001-8 | ECU main power (terminal 87 via main relay) | power_in | ME221-C1-15 + ME221-C1-64 | IGN +12V + VBAT | power_in | corroborated | |
| OEM-X60001-9 | DBW output-stage return (P_DKSM-) | ground | ME221-C1-10 + ME221-C1-61 + ME221-C1-89 + ME221-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | single_source | |
| OEM-X60002-1 | O2 sensor heater, front 1 (pre-cat) | low_side_out | ME221-C1-16 | LSU HEATER -VE | low_side_out | corroborated | |
| OEM-X60002-12 | O2 sensor heater, rear 2 (post-cat) | low_side_out | ME221-C1-73 | LOW SIDE 1 | low_side_out | corroborated | |
| OEM-X60002-14 | O2 sensor signal, rear 2 (post-cat) | lambda_nb_in | — | — | — | corroborated | |
| OEM-X60002-16 | O2 sensor signal, rear 1 (post-cat) | lambda_nb_in | — | — | — | corroborated | |
| OEM-X60002-2 | O2 sensor heater, front 2 (pre-cat) | low_side_out | ME221-C1-12 | LOW SIDE 2 | low_side_out | corroborated | |
| OEM-X60002-23 | Main relay control | low_side_out | ME221-C1-42 | LOW SIDE RELAY 12 | low_side_out | corroborated | |
| OEM-X60002-6 | O2 sensor heater, rear 1 (post-cat) | low_side_out | ME221-C1-74 | LOW SIDE 3 | low_side_out | corroborated | |
| OEM-X60003-1 | Mass air flow (MAF) signal | analog_in | ME221-C1-26 | ANA VOLT 1 | analog_in | corroborated | |
| OEM-X60003-10 | VANOS intake solenoid | low_side_out | ME221-C1-44 | LOW SIDE 4 | low_side_out | corroborated | |
| OEM-X60003-11 | Injector cylinder 5 | injector_out | ME221-C1-63 | INJECTOR 1 | injector_out | corroborated | |
| OEM-X60003-12 | Map-controlled thermostat | low_side_out | ME221-C1-69 | LOW SIDE 5 | low_side_out | corroborated | |
| OEM-X60003-13 | Injector cylinder 1 | injector_out | ME221-C1-63 | INJECTOR 1 | injector_out | corroborated | |
| OEM-X60003-15 | Throttle ground | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-16 | Oil pressure switch | digital_in | ME221-C1-6 | DIG_IN 1 | digital_in | corroborated | |
| OEM-X60003-21 | Evap purge valve | low_side_out | ME221-C1-39 | LOW SIDE 6 | low_side_out | corroborated | |
| OEM-X60003-22 | Idle speed control, close | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-23 | Idle speed control, open | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-26 | Injector cylinder 3 | injector_out | ME221-C1-33 | INJECTOR 3 | injector_out | corroborated | |
| OEM-X60003-27 | Intake air temperature (IAT) | temp_in | ME221-C1-57 | ANA TEMP 2 | temp_in | corroborated | |
| OEM-X60003-28 | Engine coolant temperature (ECT) | temp_in | ME221-C1-86 | ANA TEMP 1 | temp_in | corroborated | |
| OEM-X60003-29 | Intake camshaft position | trigger_in | ME221-C1-23 | CAM A VR- | trigger_in | corroborated | |
| OEM-X60003-3 | Crankshaft position | trigger_in | ME221-C1-80 | CRANK VR+ | trigger_in | corroborated | |
| OEM-X60003-30 | Exhaust camshaft position | trigger_in | ME221-C1-22 | CAM A VR+ | trigger_in | corroborated | |
| OEM-X60003-31 | Throttle position sensor 2 | analog_in | ME221-C1-18 | ANA VOLT 4 | analog_in | corroborated | |
| OEM-X60003-32 | Throttle position sensor 1 | analog_in | ME221-C1-56 | ANA VOLT 2 | analog_in | corroborated | |
| OEM-X60003-33 | Knock sensor 1 | knock_in | ME221-C1-53 | KNOCK 1 SIGNAL | knock_in | corroborated | |
| OEM-X60003-34 | Knock sensor 2 | knock_in | — | — | — | corroborated | |
| OEM-X60003-35 | ECT ground | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-36 | Intake camshaft ground | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-37 | Crankshaft ground | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-4 | MAF supply | power_in | ME221-C1-15 + ME221-C1-64 | IGN +12V + VBAT | power_in | corroborated | |
| OEM-X60003-42 | Throttle motor drive 1 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-43 | Throttle motor drive 2 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-44 | Engine oil temperature | temp_in | — | — | — | corroborated | |
| OEM-X60003-45 | Oil temperature ground | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-46 | Knock sensor 3 | knock_in | — | — | — | corroborated | |
| OEM-X60003-47 | Knock sensor 4 | knock_in | — | — | — | corroborated | |
| OEM-X60003-49 | Exhaust camshaft ground | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-5 | Throttle (EDK/ITB) supply | power_in | ME221-C1-15 + ME221-C1-64 | IGN +12V + VBAT | power_in | corroborated | |
| OEM-X60003-50 | Oil level switch | digital_in | ME221-C1-7 | DIG_IN 2 | digital_in | corroborated | |
| OEM-X60003-6 | Injector cylinder 2 | injector_out | ME221-C1-4 | INJECTOR 2 | injector_out | corroborated | |
| OEM-X60003-7 | Injector cylinder 4 | injector_out | ME221-C1-3 | INJECTOR 4 | injector_out | corroborated | |
| OEM-X60003-8 | Injector cylinder 6 | injector_out | ME221-C1-4 | INJECTOR 2 | injector_out | corroborated | |
| OEM-X60003-9 | VANOS exhaust solenoid | low_side_out | ME221-C1-43 | LOW SIDE RELAY 14 | low_side_out | corroborated | |
| OEM-X60004-10 | Fuel pump relay control | low_side_out | ME221-C1-72 | LOW SIDE RELAY 13 | low_side_out | corroborated | |
| OEM-X60004-12 | Pedal ground 2 | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-13 | Pedal position signal 2 | analog_in | — | — | — | corroborated | |
| OEM-X60004-14 | Pedal +5V supply 2 | vref | ME221-C1-45 | 5V REF | vref | corroborated | |
| OEM-X60004-7 | Pedal ground 1 | sensor_ground | ME221-C1-52 + ME221-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-8 | Pedal position signal 1 | analog_in | ME221-C1-17 | ANA VOLT 3 | analog_in | corroborated | |
| OEM-X60004-9 | Pedal +5V supply 1 | vref | ME221-C1-45 | 5V REF | vref | corroborated | |
| OEM-X60005-1 | Ignition coil 5 | ignition_out | — | — | — | corroborated | |
| OEM-X60005-4 | Ignition coil 3 | ignition_out | ME221-C1-2 | COIL 3 | ignition_out | corroborated | |
| OEM-X60005-5 | Ignition ground | ground | ME221-C1-10 + ME221-C1-61 + ME221-C1-89 + ME221-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X60005-6 | Ignition coil 1 | ignition_out | ME221-C1-32 | COIL 1 | ignition_out | corroborated | |
| OEM-X60005-7 | Ignition coil 2 | ignition_out | ME221-C1-31 | COIL 2 | ignition_out | corroborated | |
| OEM-X60005-8 | Ignition coil 4 | ignition_out | ME221-C1-1 | COIL 4 | ignition_out | corroborated | |
| OEM-X60005-9 | Ignition coil 6 | ignition_out | — | — | — | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-2 | SP-14V-1 | 0.85 | no route | DBW output-stage supply (P_DKSM+) | — | |
| W2 | OEM-X60001-8 | SP-14V-1 | 0.85 | no route | ECU main power (terminal 87 via main relay) | — | |
| W3 | OEM-X60003-4 | SP-14V-1 | 0.85 | no route | MAF supply | — | |
| W4 | OEM-X60003-5 | SP-14V-1 | 0.85 | no route | Throttle (EDK/ITB) supply | — | |
| W5 | SP-14V-1 | ME221-C1-15 | 0.85 | no route | IGN +12V | — | |
| W6 | SP-14V-1 | ME221-C1-64 | 0.85 | no route | VBAT | — | |
| W7 | OEM-X60001-4 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W8 | OEM-X60001-5 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W9 | OEM-X60001-6 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W10 | OEM-X60001-9 | SP-GND-1 | 0.85 | no route | DBW output-stage return (P_DKSM-) | — | |
| W11 | OEM-X60005-5 | SP-GND-1 | 0.85 | no route | Ignition ground | — | |
| W12 | SP-GND-1 | ME221-C1-10 | 0.85 | no route | GROUND CHASSIS | — | |
| W13 | SP-GND-1 | ME221-C1-61 | 0.85 | no route | GROUND | — | |
| W14 | SP-GND-1 | ME221-C1-89 | 0.85 | no route | GROUND | — | |
| W15 | SP-GND-1 | ME221-C1-90 | 0.85 | no route | GROUND | — | |
| W16 | OEM-X60003-15 | SP-0V-1 | 0.5 | no route | Throttle ground | — | |
| W17 | OEM-X60003-35 | SP-0V-1 | 0.5 | no route | ECT ground | — | |
| W18 | OEM-X60003-36 | SP-0V-1 | 0.5 | no route | Intake camshaft ground | — | |
| W19 | OEM-X60003-37 | SP-0V-1 | 0.5 | no route | Crankshaft ground | — | |
| W20 | OEM-X60003-45 | SP-0V-1 | 0.5 | no route | Oil temperature ground | — | |
| W21 | OEM-X60003-49 | SP-0V-1 | 0.5 | no route | Exhaust camshaft ground | — | |
| W22 | OEM-X60004-12 | SP-0V-1 | 0.5 | no route | Pedal ground 2 | — | |
| W23 | OEM-X60004-7 | SP-0V-1 | 0.5 | no route | Pedal ground 1 | — | |
| W24 | SP-0V-1 | ME221-C1-52 | 0.5 | no route | SENSORS GROUND | — | |
| W25 | SP-0V-1 | ME221-C1-84 | 0.5 | no route | Sensor Ground | — | |
| W26 | OEM-X60004-14 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 2 | — | |
| W27 | OEM-X60004-9 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 1 | — | |
| W28 | SP-5V1-1 | ME221-C1-45 | 0.5 | no route | 5V REF | — | |
| W29 | OEM-X60003-3 | ME221-C1-80 | 0.5 | no route | Crankshaft position | — | |
| W30 | OEM-X60003-30 | ME221-C1-22 | 0.5 | no route | Exhaust camshaft position | — | |
| W31 | OEM-X60003-29 | ME221-C1-23 | 0.5 | no route | Intake camshaft position | — | |
| W32 | OEM-X60003-33 | ME221-C1-53 | 0.5 | no route | Knock sensor 1 | — | |
| W33 | OEM-X60005-6 | ME221-C1-32 | 0.5 | no route | Ignition coil 1 | — | |
| W34 | OEM-X60005-7 | ME221-C1-31 | 0.5 | no route | Ignition coil 2 | — | |
| W35 | OEM-X60005-4 | ME221-C1-2 | 0.5 | no route | Ignition coil 3 | — | |
| W36 | OEM-X60005-8 | ME221-C1-1 | 0.5 | no route | Ignition coil 4 | — | |
| W37 | OEM-X60003-13 | ME221-C1-63 | 0.5 | no route | Injector cylinder 1 | — | |
| W38 | OEM-X60003-6 | ME221-C1-4 | 0.5 | no route | Injector cylinder 2 | — | |
| W39 | OEM-X60003-26 | ME221-C1-33 | 0.5 | no route | Injector cylinder 3 | — | |
| W40 | OEM-X60003-7 | ME221-C1-3 | 0.5 | no route | Injector cylinder 4 | — | |
| W41 | OEM-X60003-11 | ME221-C1-63 | 0.5 | no route | Injector cylinder 5 | — | |
| W42 | OEM-X60003-8 | ME221-C1-4 | 0.5 | no route | Injector cylinder 6 | — | |
| W43 | OEM-X60003-1 | ME221-C1-26 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W44 | OEM-X60003-32 | ME221-C1-56 | 0.5 | no route | Throttle position sensor 1 | — | |
| W45 | OEM-X60004-8 | ME221-C1-17 | 0.5 | no route | Pedal position signal 1 | — | |
| W46 | OEM-X60003-31 | ME221-C1-18 | 0.5 | no route | Throttle position sensor 2 | — | |
| W47 | OEM-X60003-28 | ME221-C1-86 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W48 | OEM-X60001-1 | ME221-C1-37 | 0.5 | no route | Injector relay control | — | |
| W49 | OEM-X60002-23 | ME221-C1-42 | 0.5 | no route | Main relay control | — | |
| W50 | OEM-X60004-10 | ME221-C1-72 | 0.5 | no route | Fuel pump relay control | — | |
| W51 | OEM-X60002-1 | ME221-C1-16 | 0.5 | no route | O2 sensor heater, front 1 (pre-cat) | — | |
| W52 | OEM-X60002-12 | ME221-C1-73 | 0.5 | no route | O2 sensor heater, rear 2 (post-cat) | — | |
| W53 | OEM-X60002-2 | ME221-C1-12 | 0.5 | no route | O2 sensor heater, front 2 (pre-cat) | — | |
| W54 | OEM-X60002-6 | ME221-C1-74 | 0.5 | no route | O2 sensor heater, rear 1 (post-cat) | — | |
| W55 | OEM-X60003-10 | ME221-C1-44 | 0.5 | no route | VANOS intake solenoid | — | |
| W56 | OEM-X60003-12 | ME221-C1-69 | 0.5 | no route | Map-controlled thermostat | — | |
| W57 | OEM-X60003-21 | ME221-C1-39 | 0.5 | no route | Evap purge valve | — | |
| W58 | OEM-X60003-9 | ME221-C1-43 | 0.5 | no route | VANOS exhaust solenoid | — | |
| W59 | OEM-X60003-27 | ME221-C1-57 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W60 | OEM-X60003-16 | ME221-C1-6 | 0.5 | no route | Oil pressure switch | — | |
| W61 | OEM-X60003-50 | ME221-C1-7 | 0.5 | no route | Oil level switch | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | BMW-E46-MSS54-CONN | BMW | E46 DME (MSS54) harness connector | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (8)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | NET_MERGED | ME221-C1-4 + OEM-X60003-6 + OEM-X60003-8 | 2 different OEM functions share one net: OEM-X60003-6 Injector cylinder 2; OEM-X60003-8 Injector cylinder 6 |
| error | NET_MERGED | ME221-C1-63 + OEM-X60003-11 + OEM-X60003-13 | 2 different OEM functions share one net: OEM-X60003-11 Injector cylinder 5; OEM-X60003-13 Injector cylinder 1 |
| error | REQUIRED_UNMAPPED | OEM-X60003-42 | Required OEM function "Throttle motor drive 1 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60003-43 | Required OEM function "Throttle motor drive 2 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60004-13 | Required OEM function "Pedal position signal 2" (analog_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60005-1 | Required OEM function "Ignition coil 5" (ignition_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60005-9 | Required OEM function "Ignition coil 6" (ignition_out) is not connected to the new ECU. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-X60002-14 O2 sensor signal, rear 2 (post-cat); OEM-X60002-16 O2 sensor signal, rear 1 (post-cat); OEM-X60003-22 Idle speed control, close; OEM-X60003-23 Idle speed control, open; OEM-X60003-34 Knock sensor 2; OEM-X60003-44 Engine oil temperature; OEM-X60003-46 Knock sensor 3; OEM-X60003-47 Knock sensor 4 |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X60001-7 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: needs add-on. Resolve these before building: - No drive-by-wire; needs a cable-throttle conversion or an external DBW controller - Needs CAN (E46 K-bus/CAN); not documented for this ECU - Only 4 ignition outputs for 6 cylinders: wasted spark (pair coils per firing order) - Only 4 injector outputs for 6 injectors: batch / semi-sequential injection - This car has EWS 3.3 (rolling code) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-X60005 1: Ignition coil 5: no free ignition output on Motorsport Electronics ME221 - OEM-X60005 9: Ignition coil 6: no free ignition output on Motorsport Electronics ME221 - OEM-X60004 13: Pedal position signal 2: no free tps/analog_0_5 on Motorsport Electronics ME221 - OEM-X60003 42: Throttle motor drive 1 (H-bridge): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-X60003 43: Throttle motor drive 2 (H-bridge): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand Not wired: - OEM-X60001 7: Battery constant (terminal 30): Motorsport Electronics ME221 has no battery-constant input; not needed - OEM-X60003 34: Knock sensor 2: no free knock input on Motorsport Electronics ME221 - OEM-X60003 46: Knock sensor 3: no free knock input on Motorsport Electronics ME221 - OEM-X60003 47: Knock sensor 4: no free knock input on Motorsport Electronics ME221 - OEM-X60002 14: O2 sensor signal, rear 2 (post-cat): no free o2_narrowband/analog_0_5 on Motorsport Electronics ME221 - OEM-X60002 16: O2 sensor signal, rear 1 (post-cat): no free o2_narrowband/analog_0_5 on Motorsport Electronics ME221 - OEM-X60003 44: Engine oil temperature: no free thermistor/analog_0_5 on Motorsport Electronics ME221 - OEM-X60003 22: Idle speed control, close: no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-X60003 23: Idle speed control, open: no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | oem_wiring_diagram | BMW WDS A6000 DME pin table, E83 X3 (M54B30/MS45) | https://wds.psjr.org/sv/e83/zinfo/E83_PA6000A.htm | — | — | — |
| 4 | vendor_doc | Motorsport Electronics GEN2 ME221/ME360/ME442 wire-in pinout | https://motorsport-electronics.co.uk/onlinehelp/html/ME442ME360ME221GEN2Wire-InPinout.html | — | — | — |
| 2 | community_copy | bimmer-service: DME MSS54 (S54) pinout | https://www.bimmer-service.com/2025/11/14/dme-mss54-s54-pinout-schematic-diagram/ | — | — | — |
| 2 | community_copy | rusefi wiki: 2002 and 2004 BMW M3 E46 DME pinout (S54/MSS54) | https://github.com/rusefi/rusefi/wiki/2002-and-2004-BMW-M3-E46-DME-pinout | — | — | — |