BMW 3 Series E36 1990–2000 (M50/M52) → Motorsport Electronics ME360 (auto)
BMW 3 Series E36 1990–2000 (M50/M52) — Motorsport Electronics — ME360
Drawn by Michael Gnankou · Rev 0 · proposal · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | proposal · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | none |
| Size of the job | 49 wires · 5 connectors · 1 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X-54 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | SP-14V-1 | ME360-C1-15 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | ME360-C1-64 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-X-15 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-X-34 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-X-55 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-X-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-GND-1 | ME360-C1-10 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | ME360-C1-61 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | ME360-C1-89 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | ME360-C1-90 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-X-28 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | OEM-X-40 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | OEM-X-43 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-X-44 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X-71 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-0V-1 | ME360-C1-52 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-0V-1 | ME360-C1-84 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X-59 | ME360-C1-45 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X-16 | ME360-C1-80 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X-17 | ME360-C1-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X-70 | ME360-C1-53 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X-50 | ME360-C1-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-X-51 | ME360-C1-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-X-52 | ME360-C1-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-X-23 | ME360-C1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-X-25 | ME360-C1-59 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-X-24 | ME360-C1-60 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-X-33 | ME360-C1-63 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | OEM-X-32 | ME360-C1-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-X-31 | ME360-C1-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X-5 | ME360-C1-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X-3 | ME360-C1-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-X-4 | ME360-C1-58 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X-1 | ME360-C1-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X-27 | ME360-C1-42 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X-41 | ME360-C1-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X-73 | ME360-C1-56 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X-78 | ME360-C1-86 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X-38 | ME360-C1-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X-2 | ME360-C1-73 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X-29 | ME360-C1-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X-36 | ME360-C1-74 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X-7 | ME360-C1-44 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X-8 | ME360-C1-69 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X-47 | ME360-C1-79 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X-13 | ME360-C1-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X-77 | ME360-C1-57 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X-42 | ME360-C1-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | ME360-C1-10 | ME360-C1-15 | open (OL) | power ground must not touch +12 V supply | |
| 2 | ME360-C1-10 | ME360-C1-45 | open (OL) | power ground must not touch 5 V sensor reference | |
| 3 | ME360-C1-15 | ME360-C1-45 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 4 | ME360-C1-52 | ME360-C1-15 | open (OL) | sensor ground must not touch +12 V supply | |
| 5 | ME360-C1-52 | ME360-C1-45 | open (OL) | sensor ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
ME360-C1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | COIL 4 | — | W26 | — | 0.5 | OEM-X-23 | — | — | — |
| 10 | GROUND CHASSIS | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 11 | EGT 1 | — | — | — | — | — | — | — | — |
| 12 | LOW SIDE 2 | — | W42 | — | 0.5 | OEM-X-29 | — | — | — |
| 13 | LOW SIDE RELAY 15 | — | — | — | — | — | — | — | — |
| 14 | LSU +12V | — | — | — | — | — | — | — | — |
| 15 | IGN +12V | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 16 | LSU HEATER -VE | — | W40 | — | 0.5 | OEM-X-38 | — | — | — |
| 17 | ANA VOLT 3 | — | W47 | — | 0.5 | OEM-X-13 | — | — | — |
| 18 | ANA VOLT 4 | — | — | — | — | — | — | — | — |
| 19 | LSU UN | — | — | — | — | — | — | — | — |
| 2 | COIL 3 | — | W25 | — | 0.5 | OEM-X-52 | — | — | — |
| 20 | LSU VM | — | — | — | — | — | — | — | — |
| 21 | CAN 1 HIGH | — | — | — | — | — | — | — | — |
| 22 | CAM A VR+ | — | W21 | — | 0.5 | OEM-X-17 | — | — | — |
| 23 | CAM A VR- | — | — | — | — | — | — | — | — |
| 24 | SERIAL 1 GROUND | — | — | — | — | — | — | — | — |
| 25 | SERIAL 1 TX | — | — | — | — | — | — | — | — |
| 26 | ANA VOLT 1 | — | W37 | — | 0.5 | OEM-X-41 | — | — | — |
| 28 | INJECTOR 5 | — | W33 | — | 0.5 | OEM-X-3 | — | — | — |
| 3 | INJECTOR 4 | — | W32 | — | 0.5 | OEM-X-5 | — | — | — |
| 31 | COIL 2 | — | W24 | — | 0.5 | OEM-X-51 | — | — | — |
| 32 | COIL 1 | — | W23 | — | 0.5 | OEM-X-50 | — | — | — |
| 33 | INJECTOR 3 | — | W31 | — | 0.5 | OEM-X-31 | — | — | — |
| 34 | DIG_IN 6 | — | — | — | — | — | — | — | — |
| 35 | USB D+ | — | — | — | — | — | — | — | — |
| 36 | USB D- | — | — | — | — | — | — | — | — |
| 37 | LOW SIDE RELAY 11 | — | W35 | — | 0.5 | OEM-X-1 | — | — | — |
| 38 | USB VBUS | — | — | — | — | — | — | — | — |
| 39 | LOW SIDE 6 | — | — | — | — | — | — | — | — |
| 4 | INJECTOR 2 | — | W30 | — | 0.5 | OEM-X-32 | — | — | — |
| 40 | LOW SIDE RELAY 17 | — | — | — | — | — | — | — | — |
| 41 | USB GROUND | — | — | — | — | — | — | — | — |
| 42 | LOW SIDE RELAY 12 | — | W36 | — | 0.5 | OEM-X-27 | — | — | — |
| 43 | LOW SIDE RELAY 14 | — | — | — | — | — | — | — | — |
| 44 | LOW SIDE 4 | — | W44 | — | 0.5 | OEM-X-7 | — | — | — |
| 45 | 5V REF | — | W19 | — | 0.5 | OEM-X-59 | — | — | — |
| 46 | 5V REF | — | — | — | — | — | — | — | — |
| 49 | LSU IA | — | — | — | — | — | — | — | — |
| 5 | DIG_IN 4 | — | — | — | — | — | — | — | — |
| 50 | LSU IP | — | — | — | — | — | — | — | — |
| 51 | CAN 1 LOW | — | — | — | — | — | — | — | — |
| 52 | SENSORS GROUND | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 53 | KNOCK 1 SIGNAL | — | W22 | — | 0.5 | OEM-X-70 | — | — | — |
| 55 | SERIAL 1 RX | — | — | — | — | — | — | — | — |
| 56 | ANA VOLT 2 | — | W38 | — | 0.5 | OEM-X-73 | — | — | — |
| 57 | ANA TEMP 2 | — | W48 | — | 0.5 | OEM-X-77 | — | — | — |
| 58 | INJECTOR 6 | — | W34 | — | 0.5 | OEM-X-4 | — | — | — |
| 59 | COIL 5 | — | W27 | — | 0.5 | OEM-X-25 | — | — | — |
| 6 | DIG_IN 1 | — | W49 | — | 0.5 | OEM-X-42 | — | — | — |
| 60 | COIL 6 | — | W28 | — | 0.5 | OEM-X-24 | — | — | — |
| 61 | GROUND | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 62 | DIG_IN 5 | — | — | — | — | — | — | — | — |
| 63 | INJECTOR 1 | — | W29 | — | 0.5 | OEM-X-33 | — | — | — |
| 64 | VBAT | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 65 | H-BRIDGE A OUT 1 | — | — | — | — | — | — | — | — |
| 66 | H-BRIDGE A OUT 2 | — | — | — | — | — | — | — | — |
| 67 | Stepper 1 / A1 | — | — | — | — | — | — | — | — |
| 68 | Stepper 2 / A2 | — | — | — | — | — | — | — | — |
| 69 | LOW SIDE 5 | — | W45 | — | 0.5 | OEM-X-8 | — | — | — |
| 7 | DIG_IN 2 | — | — | — | — | — | — | — | — |
| 70 | Stepper 3 / B1 | — | — | — | — | — | — | — | — |
| 71 | Stepper 4 / B2 | — | — | — | — | — | — | — | — |
| 72 | LOW SIDE RELAY 13 | — | — | — | — | — | — | — | — |
| 73 | LOW SIDE 1 | — | W41 | — | 0.5 | OEM-X-2 | — | — | — |
| 74 | LOW SIDE 3 | — | W43 | — | 0.5 | OEM-X-36 | — | — | — |
| 75 | LOW SIDE RELAY 16 | — | — | — | — | — | — | — | — |
| 76 | 5V REF | — | — | — | — | — | — | — | — |
| 77 | ANA TEMP 3 | — | — | — | — | — | — | — | — |
| 79 | TACHOMETER | — | W46 | — | 0.5 | OEM-X-47 | — | — | — |
| 8 | DIG_IN 3 | — | — | — | — | — | — | — | — |
| 80 | CRANK VR+ | — | W20 | — | 0.5 | OEM-X-16 | — | — | — |
| 81 | CRANK VR- | — | — | — | — | — | — | — | — |
| 82 | CAM B VR+ | — | — | — | — | — | — | — | — |
| 83 | CAM B VR- | — | — | — | — | — | — | — | — |
| 84 | Sensor Ground | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 86 | ANA TEMP 1 | — | W39 | — | 0.5 | OEM-X-78 | — | — | — |
| 89 | GROUND | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | LOW SIDE RELAY 18 | — | — | — | — | — | — | — | — |
| 90 | GROUND | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
OEM-X
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Fuel pump relay control | — | W35 | — | 0.5 | ME360-C1-37 | — | — | — |
| 13 | O2 sensor signal | — | W47 | — | 0.5 | ME360-C1-17 | — | — | — |
| 15 | Ground | — | W4 | — | 0.85 | SP-GND-1 | — | — | — |
| 16 | Crank position sensor (+) | — | W20 | — | 0.5 | ME360-C1-80 | — | — | — |
| 17 | Camshaft position sensor (Hall) | — | W21 | — | 0.5 | ME360-C1-22 | — | — | — |
| 2 | Idle speed control valve (close winding) | — | W41 | — | 0.5 | ME360-C1-73 | — | — | — |
| 23 | Ignition coil cylinder 4 | — | W26 | — | 0.5 | ME360-C1-1 | — | — | — |
| 24 | Ignition coil cylinder 6 | — | W28 | — | 0.5 | ME360-C1-60 | — | — | — |
| 25 | Ignition coil cylinder 5 | — | W27 | — | 0.5 | ME360-C1-59 | — | — | — |
| 26 | Battery voltage (constant +12V) | — | — | — | — | — | — | — | — |
| 27 | Main relay control | — | W36 | — | 0.5 | ME360-C1-42 | — | — | — |
| 28 | Ground (electronics + sensor shielding) | — | W12 | — | 0.5 | SP-0V-1 | — | — | — |
| 29 | Idle speed control valve (open winding) | — | W42 | — | 0.5 | ME360-C1-12 | — | — | — |
| 3 | Injector cylinder 5 | — | W33 | — | 0.5 | ME360-C1-28 | — | — | — |
| 31 | Injector cylinder 3 | — | W31 | — | 0.5 | ME360-C1-33 | — | — | — |
| 32 | Injector cylinder 2 | — | W30 | — | 0.5 | ME360-C1-4 | — | — | — |
| 33 | Injector cylinder 1 | — | W29 | — | 0.5 | ME360-C1-63 | — | — | — |
| 34 | Ground (output stages) | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 36 | Evap purge solenoid | — | W43 | — | 0.5 | ME360-C1-74 | — | — | — |
| 38 | O2 sensor heater relay control | — | W40 | — | 0.5 | ME360-C1-16 | — | — | — |
| 4 | Injector cylinder 6 | — | W34 | — | 0.5 | ME360-C1-58 | — | — | — |
| 40 | O2 sensor signal ground | — | W13 | — | 0.5 | SP-0V-1 | — | — | — |
| 41 | Mass air flow (MAF) signal | — | W37 | — | 0.5 | ME360-C1-26 | — | — | — |
| 42 | Vehicle speed signal | — | W49 | — | 0.5 | ME360-C1-6 | — | — | — |
| 43 | Crank position sensor (-) | — | W14 | — | 0.5 | SP-0V-1 | — | — | — |
| 44 | Sensor ground (IAT/ECT/TPS) | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 45 | Shield ground | — | — | — | — | — | — | — | — |
| 47 | Tachometer output | — | W46 | — | 0.5 | ME360-C1-79 | — | — | — |
| 5 | Injector cylinder 4 | — | W32 | — | 0.5 | ME360-C1-3 | — | — | — |
| 50 | Ignition coil cylinder 1 | — | W23 | — | 0.5 | ME360-C1-32 | — | — | — |
| 51 | Ignition coil cylinder 2 | — | W24 | — | 0.5 | ME360-C1-31 | — | — | — |
| 52 | Ignition coil cylinder 3 | — | W25 | — | 0.5 | ME360-C1-2 | — | — | — |
| 54 | ECU power (+14V from main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 55 | Ground (ignition) | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 56 | Ignition switch (terminal 15) | — | — | — | — | — | — | — | — |
| 59 | +5V sensor supply | — | W19 | — | 0.5 | ME360-C1-45 | — | — | — |
| 6 | Ground (injector output stages) | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 69 | Knock sensor cylinders 4-6 | — | — | — | — | — | — | — | — |
| 7 | VANOS intake camshaft solenoid | — | W44 | — | 0.5 | ME360-C1-44 | — | — | — |
| 70 | Knock sensor cylinders 1-3 | — | W22 | — | 0.5 | ME360-C1-53 | — | — | — |
| 71 | Knock sensor ground/shield | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 73 | Throttle position (TPS) | — | W38 | — | 0.5 | ME360-C1-56 | — | — | — |
| 77 | Intake air temperature (IAT) | — | W48 | — | 0.5 | ME360-C1-57 | — | — | — |
| 78 | Engine coolant temperature (ECT) | — | W39 | — | 0.5 | ME360-C1-86 | — | — | — |
| 8 | Check engine light (MIL) | — | W45 | — | 0.5 | ME360-C1-69 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W12 | — | 0.5 | OEM-X-28 | — | — | — |
| 1 | — | — | W13 | — | 0.5 | OEM-X-40 | — | — | — |
| 1 | — | — | W14 | — | 0.5 | OEM-X-43 | — | — | — |
| 1 | — | — | W15 | — | 0.5 | OEM-X-44 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-X-71 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | ME360-C1-52 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | ME360-C1-84 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X-54 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | ME360-C1-15 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | ME360-C1-64 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W4 | — | 0.85 | OEM-X-15 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-X-34 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-X-55 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-X-6 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | ME360-C1-10 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | ME360-C1-61 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | ME360-C1-89 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | ME360-C1-90 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X-1 | Fuel pump relay control | low_side_out | ME360-C1-37 | LOW SIDE RELAY 11 | low_side_out | corroborated | |
| OEM-X-13 | O2 sensor signal | lambda_nb_in | ME360-C1-17 | ANA VOLT 3 | analog_in | corroborated | |
| OEM-X-15 | Ground | ground | ME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X-16 | Crank position sensor (+) | trigger_in | ME360-C1-80 | CRANK VR+ | trigger_in | corroborated | |
| OEM-X-17 | Camshaft position sensor (Hall) | trigger_in | ME360-C1-22 | CAM A VR+ | trigger_in | corroborated | |
| OEM-X-2 | Idle speed control valve (close winding) | low_side_out | ME360-C1-73 | LOW SIDE 1 | low_side_out | corroborated | |
| OEM-X-23 | Ignition coil cylinder 4 | ignition_out | ME360-C1-1 | COIL 4 | ignition_out | corroborated | |
| OEM-X-24 | Ignition coil cylinder 6 | ignition_out | ME360-C1-60 | COIL 6 | ignition_out | corroborated | |
| OEM-X-25 | Ignition coil cylinder 5 | ignition_out | ME360-C1-59 | COIL 5 | ignition_out | corroborated | |
| OEM-X-26 | Battery voltage (constant +12V) | power_in | — | — | — | corroborated | |
| OEM-X-27 | Main relay control | low_side_out | ME360-C1-42 | LOW SIDE RELAY 12 | low_side_out | corroborated | |
| OEM-X-28 | Ground (electronics + sensor shielding) | sensor_ground | ME360-C1-52 + ME360-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X-29 | Idle speed control valve (open winding) | low_side_out | ME360-C1-12 | LOW SIDE 2 | low_side_out | corroborated | |
| OEM-X-3 | Injector cylinder 5 | injector_out | ME360-C1-28 | INJECTOR 5 | injector_out | corroborated | |
| OEM-X-31 | Injector cylinder 3 | injector_out | ME360-C1-33 | INJECTOR 3 | injector_out | corroborated | |
| OEM-X-32 | Injector cylinder 2 | injector_out | ME360-C1-4 | INJECTOR 2 | injector_out | corroborated | |
| OEM-X-33 | Injector cylinder 1 | injector_out | ME360-C1-63 | INJECTOR 1 | injector_out | corroborated | |
| OEM-X-34 | Ground (output stages) | ground | ME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X-36 | Evap purge solenoid | low_side_out | ME360-C1-74 | LOW SIDE 3 | low_side_out | corroborated | |
| OEM-X-38 | O2 sensor heater relay control | low_side_out | ME360-C1-16 | LSU HEATER -VE | low_side_out | corroborated | |
| OEM-X-4 | Injector cylinder 6 | injector_out | ME360-C1-58 | INJECTOR 6 | injector_out | corroborated | |
| OEM-X-40 | O2 sensor signal ground | sensor_ground | ME360-C1-52 + ME360-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X-41 | Mass air flow (MAF) signal | analog_in | ME360-C1-26 | ANA VOLT 1 | analog_in | corroborated | |
| OEM-X-42 | Vehicle speed signal | digital_in | ME360-C1-6 | DIG_IN 1 | digital_in | corroborated | |
| OEM-X-43 | Crank position sensor (-) | sensor_ground | ME360-C1-52 + ME360-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X-44 | Sensor ground (IAT/ECT/TPS) | sensor_ground | ME360-C1-52 + ME360-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X-45 | Shield ground | shield | — | — | — | corroborated | |
| OEM-X-47 | Tachometer output | tacho_out | ME360-C1-79 | TACHOMETER | tacho_out | corroborated | |
| OEM-X-5 | Injector cylinder 4 | injector_out | ME360-C1-3 | INJECTOR 4 | injector_out | corroborated | |
| OEM-X-50 | Ignition coil cylinder 1 | ignition_out | ME360-C1-32 | COIL 1 | ignition_out | corroborated | |
| OEM-X-51 | Ignition coil cylinder 2 | ignition_out | ME360-C1-31 | COIL 2 | ignition_out | corroborated | |
| OEM-X-52 | Ignition coil cylinder 3 | ignition_out | ME360-C1-2 | COIL 3 | ignition_out | corroborated | |
| OEM-X-54 | ECU power (+14V from main relay) | power_in | ME360-C1-15 + ME360-C1-64 | IGN +12V + VBAT | power_in | corroborated | |
| OEM-X-55 | Ground (ignition) | ground | ME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X-56 | Ignition switch (terminal 15) | digital_in | — | — | — | corroborated | |
| OEM-X-59 | +5V sensor supply | vref | ME360-C1-45 | 5V REF | vref | corroborated | |
| OEM-X-6 | Ground (injector output stages) | ground | ME360-C1-10 + ME360-C1-61 + ME360-C1-89 + ME360-C1-90 | GROUND CHASSIS + GROUND + GROUND + GROUND | ground | corroborated | |
| OEM-X-69 | Knock sensor cylinders 4-6 | knock_in | — | — | — | corroborated | |
| OEM-X-7 | VANOS intake camshaft solenoid | low_side_out | ME360-C1-44 | LOW SIDE 4 | low_side_out | corroborated | |
| OEM-X-70 | Knock sensor cylinders 1-3 | knock_in | ME360-C1-53 | KNOCK 1 SIGNAL | knock_in | corroborated | |
| OEM-X-71 | Knock sensor ground/shield | sensor_ground | ME360-C1-52 + ME360-C1-84 | SENSORS GROUND + Sensor Ground | sensor_ground | corroborated | |
| OEM-X-73 | Throttle position (TPS) | analog_in | ME360-C1-56 | ANA VOLT 2 | analog_in | corroborated | |
| OEM-X-77 | Intake air temperature (IAT) | temp_in | ME360-C1-57 | ANA TEMP 2 | temp_in | corroborated | |
| OEM-X-78 | Engine coolant temperature (ECT) | temp_in | ME360-C1-86 | ANA TEMP 1 | temp_in | corroborated | |
| OEM-X-8 | Check engine light (MIL) | low_side_out | ME360-C1-69 | LOW SIDE 5 | low_side_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X-54 | SP-14V-1 | 0.85 | no route | ECU power (+14V from main relay) | — | |
| W2 | SP-14V-1 | ME360-C1-15 | 0.85 | no route | IGN +12V | — | |
| W3 | SP-14V-1 | ME360-C1-64 | 0.85 | no route | VBAT | — | |
| W4 | OEM-X-15 | SP-GND-1 | 0.85 | no route | Ground | — | |
| W5 | OEM-X-34 | SP-GND-1 | 0.85 | no route | Ground (output stages) | — | |
| W6 | OEM-X-55 | SP-GND-1 | 0.85 | no route | Ground (ignition) | — | |
| W7 | OEM-X-6 | SP-GND-1 | 0.85 | no route | Ground (injector output stages) | — | |
| W8 | SP-GND-1 | ME360-C1-10 | 0.85 | no route | GROUND CHASSIS | — | |
| W9 | SP-GND-1 | ME360-C1-61 | 0.85 | no route | GROUND | — | |
| W10 | SP-GND-1 | ME360-C1-89 | 0.85 | no route | GROUND | — | |
| W11 | SP-GND-1 | ME360-C1-90 | 0.85 | no route | GROUND | — | |
| W12 | OEM-X-28 | SP-0V-1 | 0.5 | no route | Ground (electronics + sensor shielding) | — | |
| W13 | OEM-X-40 | SP-0V-1 | 0.5 | no route | O2 sensor signal ground | — | |
| W14 | OEM-X-43 | SP-0V-1 | 0.5 | no route | Crank position sensor (-) | — | |
| W15 | OEM-X-44 | SP-0V-1 | 0.5 | no route | Sensor ground (IAT/ECT/TPS) | — | |
| W16 | OEM-X-71 | SP-0V-1 | 0.5 | no route | Knock sensor ground/shield | — | |
| W17 | SP-0V-1 | ME360-C1-52 | 0.5 | no route | SENSORS GROUND | — | |
| W18 | SP-0V-1 | ME360-C1-84 | 0.5 | no route | Sensor Ground | — | |
| W19 | OEM-X-59 | ME360-C1-45 | 0.5 | no route | +5V sensor supply | — | |
| W20 | OEM-X-16 | ME360-C1-80 | 0.5 | no route | Crank position sensor (+) | — | |
| W21 | OEM-X-17 | ME360-C1-22 | 0.5 | no route | Camshaft position sensor (Hall) | — | |
| W22 | OEM-X-70 | ME360-C1-53 | 0.5 | no route | Knock sensor cylinders 1-3 | — | |
| W23 | OEM-X-50 | ME360-C1-32 | 0.5 | no route | Ignition coil cylinder 1 | — | |
| W24 | OEM-X-51 | ME360-C1-31 | 0.5 | no route | Ignition coil cylinder 2 | — | |
| W25 | OEM-X-52 | ME360-C1-2 | 0.5 | no route | Ignition coil cylinder 3 | — | |
| W26 | OEM-X-23 | ME360-C1-1 | 0.5 | no route | Ignition coil cylinder 4 | — | |
| W27 | OEM-X-25 | ME360-C1-59 | 0.5 | no route | Ignition coil cylinder 5 | — | |
| W28 | OEM-X-24 | ME360-C1-60 | 0.5 | no route | Ignition coil cylinder 6 | — | |
| W29 | OEM-X-33 | ME360-C1-63 | 0.5 | no route | Injector cylinder 1 | — | |
| W30 | OEM-X-32 | ME360-C1-4 | 0.5 | no route | Injector cylinder 2 | — | |
| W31 | OEM-X-31 | ME360-C1-33 | 0.5 | no route | Injector cylinder 3 | — | |
| W32 | OEM-X-5 | ME360-C1-3 | 0.5 | no route | Injector cylinder 4 | — | |
| W33 | OEM-X-3 | ME360-C1-28 | 0.5 | no route | Injector cylinder 5 | — | |
| W34 | OEM-X-4 | ME360-C1-58 | 0.5 | no route | Injector cylinder 6 | — | |
| W35 | OEM-X-1 | ME360-C1-37 | 0.5 | no route | Fuel pump relay control | — | |
| W36 | OEM-X-27 | ME360-C1-42 | 0.5 | no route | Main relay control | — | |
| W37 | OEM-X-41 | ME360-C1-26 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W38 | OEM-X-73 | ME360-C1-56 | 0.5 | no route | Throttle position (TPS) | — | |
| W39 | OEM-X-78 | ME360-C1-86 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W40 | OEM-X-38 | ME360-C1-16 | 0.5 | no route | O2 sensor heater relay control | — | |
| W41 | OEM-X-2 | ME360-C1-73 | 0.5 | no route | Idle speed control valve (close winding) | — | |
| W42 | OEM-X-29 | ME360-C1-12 | 0.5 | no route | Idle speed control valve (open winding) | — | |
| W43 | OEM-X-36 | ME360-C1-74 | 0.5 | no route | Evap purge solenoid | — | |
| W44 | OEM-X-7 | ME360-C1-44 | 0.5 | no route | VANOS intake camshaft solenoid | — | |
| W45 | OEM-X-8 | ME360-C1-69 | 0.5 | no route | Check engine light (MIL) | — | |
| W46 | OEM-X-47 | ME360-C1-79 | 0.5 | no route | Tachometer output | — | |
| W47 | OEM-X-13 | ME360-C1-17 | 0.5 | no route | O2 sensor signal | — | |
| W48 | OEM-X-77 | ME360-C1-57 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W49 | OEM-X-42 | ME360-C1-6 | 0.5 | no route | Vehicle speed signal | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | BMW-E36-DME-CONN | BMW | E36 DME (M3.1/M3.3.1) harness connector | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (1)
| Severity | Code | Subject | Message |
|---|---|---|---|
| info | UNMAPPED | OEM | 3 optional OEM pins are not mapped: OEM-X-45 Shield ground; OEM-X-56 Ignition switch (terminal 15); OEM-X-69 Knock sensor cylinders 4-6 |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X-26 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Not wired: - OEM-X 26: Battery voltage (constant +12V): Motorsport Electronics ME360 has no battery-constant input; not needed - OEM-X 69: Knock sensor cylinders 4-6: no free knock input on Motorsport Electronics ME360 - OEM-X 45: Shield ground: no shield pin on Motorsport Electronics ME360 - OEM-X 56: Ignition switch (terminal 15): key-on 12 V sense — optional in a swap (the main relay is energized from keyed 12 V, not from this pin); Motorsport Electronics ME360 has no dedicated key-on input
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link BMWLink E36X (G4X) plug-in install manual | https://linkecu.com/documentation/E36X.pdf | archive | 2026-10-05 | 010cda3acd08 |
| 4 | vendor_doc | Motorsport Electronics GEN2 ME221/ME360/ME442 wire-in pinout | https://motorsport-electronics.co.uk/onlinehelp/html/ME442ME360ME221GEN2Wire-InPinout.html | — | — | — |
| 2 | community_copy | bimmer-service: Bosch Motronic M3.3.1 pinout (E36 M50) | https://www.bimmer-service.com/2025/11/17/bosch-motronic-m3-3-1-pinout-wiring-diagram/ | — | — | — |