BMW 3 Series E46 1998–2006 (M54) → Link G5 Voodoo Pro V2 (auto)
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 3: read the Findings page before cutting any wire |
| Size of the job | 73 wires · 13 connectors · 1 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | SP-14V-1 | G5VOODOOPROV-A-A5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | SP-14V-1 | G5VOODOOPROV-B-B5 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-X60001-4 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-X60001-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | OEM-X60001-6 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-X60005-5 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | SP-GND-1 | G5VOODOOPROV-A-A25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | SP-GND-1 | G5VOODOOPROV-A-A34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | SP-GND-1 | G5VOODOOPROV-B-B25 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | G5VOODOOPROV-B-B34 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | G5VOODOOPROV-E-E21 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | G5VOODOOPROV-E-E7 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | OEM-X60002-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-X60002-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-X60002-22 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-X60002-24 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-X60003-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-X60003-17 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-X60003-18 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-X60003-20 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-X60003-21 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-X60003-23 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-X60003-25 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-X60003-28 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-X60004-12 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-X60004-7 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | SP-0V-1 | G5VOODOOPROV-A-A24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | G5VOODOOPROV-B-B22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-X60003-7 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-X60004-14 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-X60004-9 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-X60003-8 | G5VOODOOPROV-A-A8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-X60003-2 | G5VOODOOPROV-A-A9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-X60003-5 | G5VOODOOPROV-A-A30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-X60003-29 | G5VOODOOPROV-B-B9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-X60003-30 | G5VOODOOPROV-B-B8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-X60005-3 | G5VOODOOPROV-A-A13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-X60005-2 | G5VOODOOPROV-A-A12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-X60005-1 | G5VOODOOPROV-A-A11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-X60005-9 | G5VOODOOPROV-A-A10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-X60005-8 | G5VOODOOPROV-B-B13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-X60005-7 | G5VOODOOPROV-B-B12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-X60003-33 | G5VOODOOPROV-A-A4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-X60003-34 | G5VOODOOPROV-A-A3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-X60003-35 | G5VOODOOPROV-A-A2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-X60003-36 | G5VOODOOPROV-A-A1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-X60003-37 | G5VOODOOPROV-B-B4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-X60003-38 | G5VOODOOPROV-B-B3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-X60003-48 | SP-SHD-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | SP-SHD-1 | G5VOODOOPROV-A-A7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-X60003-1 | G5VOODOOPROV-A-A17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-X60003-19 | G5VOODOOPROV-A-A21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-X60004-8 | G5VOODOOPROV-A-A20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-X60003-10 | G5VOODOOPROV-A-A22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-X60004-13 | G5VOODOOPROV-A-A19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-X60003-24 | G5VOODOOPROV-A-A15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-X60001-1 | G5VOODOOPROV-E-E15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-X60002-23 | G5VOODOOPROV-E-E22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-X60004-10 | G5VOODOOPROV-B-B2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-X60002-1 | G5VOODOOPROV-B-B1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-X60002-13 | G5VOODOOPROV-E-E4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-X60002-19 | G5VOODOOPROV-E-E3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-X60002-7 | G5VOODOOPROV-E-E2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-X60003-40 | G5VOODOOPROV-E-E1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-X60002-14 | G5VOODOOPROV-A-A33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-X60002-15 | G5VOODOOPROV-A-A14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-X60002-16 | G5VOODOOPROV-A-A18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-X60002-18 | G5VOODOOPROV-A-A29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-X60003-22 | G5VOODOOPROV-A-A16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-X60003-27 | G5VOODOOPROV-B-B6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | G5VOODOOPROV-A-A5 | G5VOODOOPROV-A-A24 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | G5VOODOOPROV-A-A24 | G5VOODOOPROV-A-A32 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 3 | G5VOODOOPROV-A-A25 | G5VOODOOPROV-A-A32 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | G5VOODOOPROV-A-A25 | G5VOODOOPROV-A-A5 | open (OL) | power ground must not touch +12 V supply | |
| 5 | G5VOODOOPROV-A-A5 | G5VOODOOPROV-A-A32 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
G5VOODOOPROV-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| A1 | Injection 4 | — | W49 | — | 0.5 | OEM-X60003-36 | — | — | — |
| A10 | Ignition 4 | — | W43 | — | 0.5 | OEM-X60005-9 | — | — | — |
| A11 | Ignition 3 | — | W42 | — | 0.5 | OEM-X60005-1 | — | — | — |
| A12 | Ignition 2 | — | W41 | — | 0.5 | OEM-X60005-2 | — | — | — |
| A13 | Ignition 1 | — | W40 | — | 0.5 | OEM-X60005-3 | — | — | — |
| A14 | Analogue Volt 4 | — | W69 | — | 0.5 | OEM-X60002-15 | — | — | — |
| A15 | Analogue Temp 1 | — | W59 | — | 0.5 | OEM-X60003-24 | — | — | — |
| A16 | Analogue Temp 2 | — | W72 | — | 0.5 | OEM-X60003-22 | — | — | — |
| A17 | Analogue Volt 1 | — | W54 | — | 0.5 | OEM-X60003-1 | — | — | — |
| A18 | ADIO 4 | — | W70 | — | 0.5 | OEM-X60002-16 | — | — | — |
| A19 | ADIO 3 | — | W58 | — | 0.5 | OEM-X60004-13 | — | — | — |
| A2 | Injection 3 | — | W48 | — | 0.5 | OEM-X60003-35 | — | — | — |
| A20 | ADIO 2 | — | W56 | — | 0.5 | OEM-X60004-8 | — | — | — |
| A21 | ADIO 1 | — | W55 | — | 0.5 | OEM-X60003-19 | — | — | — |
| A22 | Analogue Volt 2 | — | W57 | — | 0.5 | OEM-X60003-10 | — | — | — |
| A23 | Digital Input 3 | — | — | — | — | — | — | — | — |
| A24 | Sensor Ground | — | W29 | — | 0.5 | SP-0V-1 | — | — | — |
| A25 | Ground | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| A26 | ADIO 8 | — | — | — | — | — | — | — | — |
| A27 | ADIO 7 | — | — | — | — | — | — | — | — |
| A28 | ADIO 6 | — | — | — | — | — | — | — | — |
| A29 | ADIO 5 | — | W71 | — | 0.5 | OEM-X60002-18 | — | — | — |
| A3 | Injection 2 | — | W47 | — | 0.5 | OEM-X60003-34 | — | — | — |
| A30 | Digital Input 1 | — | W37 | — | 0.5 | OEM-X60003-5 | — | — | — |
| A31 | Digital Input 2 | — | — | — | — | — | — | — | — |
| A32 | +5V Out | — | W34 | — | 0.5 | SP-5V1-1 | — | — | — |
| A33 | Analogue Volt 3 | — | W68 | — | 0.5 | OEM-X60002-14 | — | — | — |
| A34 | Ground | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| A4 | Injection 1 | — | W46 | — | 0.5 | OEM-X60003-33 | — | — | — |
| A5 | +14V | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| A6 | Ignition Switch | — | — | — | — | — | — | — | — |
| A7 | Shield Ground | — | W53 | — | 0.5 | SP-SHD-1 | — | — | — |
| A8 | Trigger 1 | — | W35 | — | 0.5 | OEM-X60003-8 | — | — | — |
| A9 | Trigger 2 | — | W36 | — | 0.5 | OEM-X60003-2 | — | — | — |
G5VOODOOPROV-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| B1 | Injection 8 | — | W63 | — | 0.5 | OEM-X60002-1 | — | — | — |
| B10 | Ignition 8 | — | — | — | — | — | — | — | — |
| B11 | Ignition 7 | — | — | — | — | — | — | — | — |
| B12 | Ignition 6 | — | W45 | — | 0.5 | OEM-X60005-7 | — | — | — |
| B13 | Ignition 5 | — | W44 | — | 0.5 | OEM-X60005-8 | — | — | — |
| B14 | Analogue Volt 14 | — | — | — | — | — | — | — | — |
| B15 | Analogue Volt 6 | — | — | — | — | — | — | — | — |
| B16 | Analogue Volt 7 | — | — | — | — | — | — | — | — |
| B17 | Shield Ground | — | — | — | — | — | — | — | — |
| B18 | Aux 1 / H-Bridge 1 | — | — | — | — | — | — | — | — |
| B19 | Digital Input 6 / K-Line 2 | — | — | — | — | — | — | — | — |
| B2 | Injection 7 | — | W62 | — | 0.5 | OEM-X60004-10 | — | — | — |
| B20 | Digital Input 5 / K-Line 1 | — | — | — | — | — | — | — | — |
| B21 | Digital Input 4 | — | — | — | — | — | — | — | — |
| B22 | Sensor Ground | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| B23 | Analogue Volt 8 | — | — | — | — | — | — | — | — |
| B24 | Analogue Volt 9 | — | — | — | — | — | — | — | — |
| B25 | Ground | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| B26 | Aux 2 / H-Bridge 1 | — | — | — | — | — | — | — | — |
| B27 | Digital Input 10 | — | — | — | — | — | — | — | — |
| B28 | Digital Input 9 | — | — | — | — | — | — | — | — |
| B29 | Digital Input 8 | — | — | — | — | — | — | — | — |
| B3 | Injection 6 | — | W51 | — | 0.5 | OEM-X60003-38 | — | — | — |
| B30 | Digital Input 7 | — | — | — | — | — | — | — | — |
| B31 | Analogue Volt 10 | — | — | — | — | — | — | — | — |
| B32 | Analogue Volt 11 | — | — | — | — | — | — | — | — |
| B33 | Analogue Volt 5 | — | — | — | — | — | — | — | — |
| B34 | Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| B4 | Injection 5 | — | W50 | — | 0.5 | OEM-X60003-37 | — | — | — |
| B5 | +14V E-Throttle | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| B6 | Analogue Temp 3 | — | W73 | — | 0.5 | OEM-X60003-27 | — | — | — |
| B7 | Analogue Temp 4 | — | — | — | — | — | — | — | — |
| B8 | Knock 2 | — | W39 | — | 0.5 | OEM-X60003-30 | — | — | — |
| B9 | Knock 1 | — | W38 | — | 0.5 | OEM-X60003-29 | — | — | — |
G5VOODOOPROV-E
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| E1 | Injection 12 | — | W67 | — | 0.5 | OEM-X60003-40 | — | — | — |
| E10 | Ignition 10 / Injection 14 | — | — | — | — | — | — | — | — |
| E11 | Ignition 9 / Injection 13 | — | — | — | — | — | — | — | — |
| E12 | Analogue Volt 12 | — | — | — | — | — | — | — | — |
| E13 | Analogue Volt 13 | — | — | — | — | — | — | — | — |
| E14 | Aux 3 / H-Bridge 2 | — | — | — | — | — | — | — | — |
| E15 | Aux 5 / WB1 Heat | — | W60 | — | 0.5 | OEM-X60001-1 | — | — | — |
| E16 | WB1 RE | — | — | — | — | — | — | — | — |
| E17 | WB1 IPE | — | — | — | — | — | — | — | — |
| E18 | WB1 APE | — | — | — | — | — | — | — | — |
| E19 | WB1 MES | — | — | — | — | — | — | — | — |
| E2 | Injection 11 | — | W66 | — | 0.5 | OEM-X60002-7 | — | — | — |
| E20 | Aux 4 / H-Bridge 2 | — | — | — | — | — | — | — | — |
| E21 | Ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| E22 | Aux 6 / WB2 Heat | — | W61 | — | 0.5 | OEM-X60002-23 | — | — | — |
| E23 | WB2 RE | — | — | — | — | — | — | — | — |
| E24 | WB2 IPE | — | — | — | — | — | — | — | — |
| E25 | WB2 APE | — | — | — | — | — | — | — | — |
| E26 | WB2 MES | — | — | — | — | — | — | — | — |
| E3 | Injection 10 | — | W65 | — | 0.5 | OEM-X60002-19 | — | — | — |
| E4 | Injection 9 | — | W64 | — | 0.5 | OEM-X60002-13 | — | — | — |
| E5 | CAN 2 High | — | — | — | — | — | — | — | — |
| E6 | CAN 2 Low | — | — | — | — | — | — | — | — |
| E7 | Ground | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| E8 | Ignition 12 / Injection 16 | — | — | — | — | — | — | — | — |
| E9 | Ignition 11 / Injection 15 | — | — | — | — | — | — | — | — |
OEM-X60001
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector/unloader relay control (terminal 15) | — | W60 | — | 0.5 | G5VOODOOPROV-E-E15 | — | — | — |
| 4 | Power ground | — | W5 | — | 0.85 | SP-GND-1 | — | — | — |
| 5 | Power ground | — | W6 | — | 0.85 | SP-GND-1 | — | — | — |
| 6 | Power ground | — | W7 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Battery constant (terminal 30) | — | — | — | — | — | — | — | — |
| 8 | ECU main power (terminal 87 via main relay) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Voltage supply (injector / fuse carrier) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
OEM-X60002
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | O2 sensor heater, bank 1 pre-cat | — | W63 | — | 0.5 | G5VOODOOPROV-B-B1 | — | — | — |
| 13 | O2 sensor heater, bank 2 pre-cat | — | W64 | — | 0.5 | G5VOODOOPROV-E-E4 | — | — | — |
| 14 | O2 sensor signal, bank 1 pre-cat | — | W68 | — | 0.5 | G5VOODOOPROV-A-A33 | — | — | — |
| 15 | O2 sensor signal, bank 2 pre-cat | — | W69 | — | 0.5 | G5VOODOOPROV-A-A14 | — | — | — |
| 16 | O2 sensor signal, bank 1 post-cat | — | W70 | — | 0.5 | G5VOODOOPROV-A-A18 | — | — | — |
| 18 | O2 sensor signal, bank 2 post-cat | — | W71 | — | 0.5 | G5VOODOOPROV-A-A29 | — | — | — |
| 19 | O2 sensor heater, bank 2 post-cat | — | W65 | — | 0.5 | G5VOODOOPROV-E-E3 | — | — | — |
| 20 | O2 sensor ground, bank 1 pre-cat | — | W15 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | O2 sensor ground, bank 2 pre-cat | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | O2 sensor ground, bank 1 post-cat | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 23 | Main relay control | — | W61 | — | 0.5 | G5VOODOOPROV-E-E22 | — | — | — |
| 24 | O2 sensor ground, bank 2 post-cat | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 7 | O2 sensor heater, bank 1 post-cat | — | W66 | — | 0.5 | G5VOODOOPROV-E-E2 | — | — | — |
OEM-X60003
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Mass air flow (MAF) signal | — | W54 | — | 0.5 | G5VOODOOPROV-A-A17 | — | — | — |
| 10 | Throttle position sensor 2 | — | W57 | — | 0.5 | G5VOODOOPROV-A-A22 | — | — | — |
| 15 | Exhaust camshaft ground | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 17 | MAF ground | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Intake camshaft ground | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 19 | Throttle position sensor 1 | — | W55 | — | 0.5 | G5VOODOOPROV-A-A21 | — | — | — |
| 2 | Exhaust camshaft position | — | W36 | — | 0.5 | G5VOODOOPROV-A-A9 | — | — | — |
| 20 | Throttle ground | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Crankshaft ground | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 22 | Intake air temperature (IAT) | — | W72 | — | 0.5 | G5VOODOOPROV-A-A16 | — | — | — |
| 23 | IAT ground | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 24 | Engine coolant temperature (ECT) | — | W59 | — | 0.5 | G5VOODOOPROV-A-A15 | — | — | — |
| 25 | ECT ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 27 | Engine oil temperature | — | W73 | — | 0.5 | G5VOODOOPROV-B-B6 | — | — | — |
| 28 | Oil temperature ground | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 29 | Knock sensor, cylinders 1-3 (A) | — | W38 | — | 0.5 | G5VOODOOPROV-B-B9 | — | — | — |
| 30 | Knock sensor, cylinders 1-3 (B) | — | W39 | — | 0.5 | G5VOODOOPROV-B-B8 | — | — | — |
| 31 | Knock sensor, cylinders 4-6 (A) | — | — | — | — | — | — | — | — |
| 32 | Knock sensor, cylinders 4-6 (B) | — | — | — | — | — | — | — | — |
| 33 | Injector cylinder 1 | — | W46 | — | 0.5 | G5VOODOOPROV-A-A4 | — | — | — |
| 34 | Injector cylinder 2 | — | W47 | — | 0.5 | G5VOODOOPROV-A-A3 | — | — | — |
| 35 | Injector cylinder 3 | — | W48 | — | 0.5 | G5VOODOOPROV-A-A2 | — | — | — |
| 36 | Injector cylinder 4 | — | W49 | — | 0.5 | G5VOODOOPROV-A-A1 | — | — | — |
| 37 | Injector cylinder 5 | — | W50 | — | 0.5 | G5VOODOOPROV-B-B4 | — | — | — |
| 38 | Injector cylinder 6 | — | W51 | — | 0.5 | G5VOODOOPROV-B-B3 | — | — | — |
| 40 | VANOS intake solenoid | — | W67 | — | 0.5 | G5VOODOOPROV-E-E1 | — | — | — |
| 41 | VANOS exhaust solenoid | — | — | — | — | — | — | — | — |
| 42 | Evap purge valve | — | — | — | — | — | — | — | — |
| 43 | Throttle motor drive 1 (H-bridge) | — | — | — | — | — | — | — | — |
| 44 | Throttle motor drive 2 (H-bridge) | — | — | — | — | — | — | — | — |
| 45 | Map-controlled thermostat | — | — | — | — | — | — | — | — |
| 46 | Idle speed control, close | — | — | — | — | — | — | — | — |
| 47 | Idle speed control, open | — | — | — | — | — | — | — | — |
| 48 | Knock sensor shield | — | W52 | — | 0.5 | SP-SHD-1 | — | — | — |
| 49 | DISA intake flap | — | — | — | — | — | — | — | — |
| 5 | Intake camshaft position | — | W37 | — | 0.5 | G5VOODOOPROV-A-A30 | — | — | — |
| 7 | Throttle body +5V supply | — | W31 | — | 0.5 | SP-5V1-1 | — | — | — |
| 8 | Crankshaft position | — | W35 | — | 0.5 | G5VOODOOPROV-A-A8 | — | — | — |
OEM-X60004
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Fuel pump relay control | — | W62 | — | 0.5 | G5VOODOOPROV-B-B2 | — | — | — |
| 12 | Pedal ground 2 | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 13 | Pedal position signal 2 | — | W58 | — | 0.5 | G5VOODOOPROV-A-A19 | — | — | — |
| 14 | Pedal +5V supply 2 | — | W32 | — | 0.5 | SP-5V1-1 | — | — | — |
| 7 | Pedal ground 1 | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| 8 | Pedal position signal 1 | — | W56 | — | 0.5 | G5VOODOOPROV-A-A20 | — | — | — |
| 9 | Pedal +5V supply 1 | — | W33 | — | 0.5 | SP-5V1-1 | — | — | — |
OEM-X60005
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil 3 | — | W42 | — | 0.5 | G5VOODOOPROV-A-A11 | — | — | — |
| 2 | Ignition coil 2 | — | W41 | — | 0.5 | G5VOODOOPROV-A-A12 | — | — | — |
| 3 | Ignition coil 1 | — | W40 | — | 0.5 | G5VOODOOPROV-A-A13 | — | — | — |
| 5 | Ignition ground | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 7 | Ignition coil 6 | — | W45 | — | 0.5 | G5VOODOOPROV-B-B12 | — | — | — |
| 8 | Ignition coil 5 | — | W44 | — | 0.5 | G5VOODOOPROV-B-B13 | — | — | — |
| 9 | Ignition coil 4 | — | W43 | — | 0.5 | G5VOODOOPROV-A-A10 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W15 | — | 0.5 | OEM-X60002-20 | — | — | — |
| 1 | — | — | W16 | — | 0.5 | OEM-X60002-21 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-X60002-22 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-X60002-24 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-X60003-15 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-X60003-17 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-X60003-18 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-X60003-20 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-X60003-21 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-X60003-23 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | OEM-X60003-25 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | OEM-X60003-28 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | OEM-X60004-12 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | OEM-X60004-7 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | G5VOODOOPROV-A-A24 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | G5VOODOOPROV-B-B22 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-X60001-8 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-X60001-9 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | G5VOODOOPROV-A-A5 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | G5VOODOOPROV-B-B5 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W31 | — | 0.5 | OEM-X60003-7 | — | — | — |
| 1 | — | — | W32 | — | 0.5 | OEM-X60004-14 | — | — | — |
| 1 | — | — | W33 | — | 0.5 | OEM-X60004-9 | — | — | — |
| 1 | — | — | W34 | — | 0.5 | G5VOODOOPROV-A-A32 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W5 | — | 0.85 | OEM-X60001-4 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-X60001-5 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | OEM-X60001-6 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | OEM-X60005-5 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | G5VOODOOPROV-A-A25 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | G5VOODOOPROV-A-A34 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | G5VOODOOPROV-B-B25 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | G5VOODOOPROV-B-B34 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | G5VOODOOPROV-E-E21 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | G5VOODOOPROV-E-E7 | — | — | — |
SP-SHD
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W52 | — | 0.5 | OEM-X60003-48 | — | — | — |
| 1 | — | — | W53 | — | 0.5 | G5VOODOOPROV-A-A7 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-X60001-1 | Injector/unloader relay control (terminal 15) | low_side_out | G5VOODOOPROV-E-E15 | Aux 5 / WB1 Heat | low_side_out | corroborated | |
| OEM-X60001-4 | Power ground | ground | G5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7 | Ground + Ground + Ground + Ground + Ground + Ground | ground | corroborated | |
| OEM-X60001-5 | Power ground | ground | G5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7 | Ground + Ground + Ground + Ground + Ground + Ground | ground | corroborated | |
| OEM-X60001-6 | Power ground | ground | G5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7 | Ground + Ground + Ground + Ground + Ground + Ground | ground | corroborated | |
| OEM-X60001-7 | Battery constant (terminal 30) | power_in | — | — | — | corroborated | |
| OEM-X60001-8 | ECU main power (terminal 87 via main relay) | power_in | G5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5 | +14V + +14V E-Throttle | power_in | corroborated | |
| OEM-X60001-9 | Voltage supply (injector / fuse carrier) | power_in | G5VOODOOPROV-A-A5 + G5VOODOOPROV-B-B5 | +14V + +14V E-Throttle | power_in | corroborated | |
| OEM-X60002-1 | O2 sensor heater, bank 1 pre-cat | low_side_out | G5VOODOOPROV-B-B1 | Injection 8 | injector_out | corroborated | |
| OEM-X60002-13 | O2 sensor heater, bank 2 pre-cat | low_side_out | G5VOODOOPROV-E-E4 | Injection 9 | injector_out | corroborated | |
| OEM-X60002-14 | O2 sensor signal, bank 1 pre-cat | lambda_nb_in | G5VOODOOPROV-A-A33 | Analogue Volt 3 | analog_in | corroborated | |
| OEM-X60002-15 | O2 sensor signal, bank 2 pre-cat | lambda_nb_in | G5VOODOOPROV-A-A14 | Analogue Volt 4 | analog_in | corroborated | |
| OEM-X60002-16 | O2 sensor signal, bank 1 post-cat | lambda_nb_in | G5VOODOOPROV-A-A18 | ADIO 4 | analog_in | corroborated | |
| OEM-X60002-18 | O2 sensor signal, bank 2 post-cat | lambda_nb_in | G5VOODOOPROV-A-A29 | ADIO 5 | analog_in | corroborated | |
| OEM-X60002-19 | O2 sensor heater, bank 2 post-cat | low_side_out | G5VOODOOPROV-E-E3 | Injection 10 | injector_out | corroborated | |
| OEM-X60002-20 | O2 sensor ground, bank 1 pre-cat | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-21 | O2 sensor ground, bank 2 pre-cat | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-22 | O2 sensor ground, bank 1 post-cat | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-23 | Main relay control | low_side_out | G5VOODOOPROV-E-E22 | Aux 6 / WB2 Heat | low_side_out | corroborated | |
| OEM-X60002-24 | O2 sensor ground, bank 2 post-cat | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60002-7 | O2 sensor heater, bank 1 post-cat | low_side_out | G5VOODOOPROV-E-E2 | Injection 11 | injector_out | corroborated | |
| OEM-X60003-1 | Mass air flow (MAF) signal | analog_in | G5VOODOOPROV-A-A17 | Analogue Volt 1 | analog_in | corroborated | |
| OEM-X60003-10 | Throttle position sensor 2 | analog_in | G5VOODOOPROV-A-A22 | Analogue Volt 2 | analog_in | corroborated | |
| OEM-X60003-15 | Exhaust camshaft ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-17 | MAF ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-18 | Intake camshaft ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-19 | Throttle position sensor 1 | analog_in | G5VOODOOPROV-A-A21 | ADIO 1 | analog_in | corroborated | |
| OEM-X60003-2 | Exhaust camshaft position | trigger_in | G5VOODOOPROV-A-A9 | Trigger 2 | trigger_in | corroborated | |
| OEM-X60003-20 | Throttle ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-21 | Crankshaft ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-22 | Intake air temperature (IAT) | temp_in | G5VOODOOPROV-A-A16 | Analogue Temp 2 | temp_in | corroborated | |
| OEM-X60003-23 | IAT ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-24 | Engine coolant temperature (ECT) | temp_in | G5VOODOOPROV-A-A15 | Analogue Temp 1 | temp_in | corroborated | |
| OEM-X60003-25 | ECT ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-27 | Engine oil temperature | temp_in | G5VOODOOPROV-B-B6 | Analogue Temp 3 | temp_in | corroborated | |
| OEM-X60003-28 | Oil temperature ground | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60003-29 | Knock sensor, cylinders 1-3 (A) | knock_in | G5VOODOOPROV-B-B9 | Knock 1 | knock_in | corroborated | |
| OEM-X60003-30 | Knock sensor, cylinders 1-3 (B) | knock_in | G5VOODOOPROV-B-B8 | Knock 2 | knock_in | corroborated | |
| OEM-X60003-31 | Knock sensor, cylinders 4-6 (A) | knock_in | — | — | — | corroborated | |
| OEM-X60003-32 | Knock sensor, cylinders 4-6 (B) | knock_in | — | — | — | corroborated | |
| OEM-X60003-33 | Injector cylinder 1 | injector_out | G5VOODOOPROV-A-A4 | Injection 1 | injector_out | corroborated | |
| OEM-X60003-34 | Injector cylinder 2 | injector_out | G5VOODOOPROV-A-A3 | Injection 2 | injector_out | corroborated | |
| OEM-X60003-35 | Injector cylinder 3 | injector_out | G5VOODOOPROV-A-A2 | Injection 3 | injector_out | corroborated | |
| OEM-X60003-36 | Injector cylinder 4 | injector_out | G5VOODOOPROV-A-A1 | Injection 4 | injector_out | corroborated | |
| OEM-X60003-37 | Injector cylinder 5 | injector_out | G5VOODOOPROV-B-B4 | Injection 5 | injector_out | corroborated | |
| OEM-X60003-38 | Injector cylinder 6 | injector_out | G5VOODOOPROV-B-B3 | Injection 6 | injector_out | corroborated | |
| OEM-X60003-40 | VANOS intake solenoid | low_side_out | G5VOODOOPROV-E-E1 | Injection 12 | injector_out | corroborated | |
| OEM-X60003-41 | VANOS exhaust solenoid | low_side_out | — | — | — | corroborated | |
| OEM-X60003-42 | Evap purge valve | low_side_out | — | — | — | corroborated | |
| OEM-X60003-43 | Throttle motor drive 1 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-44 | Throttle motor drive 2 (H-bridge) | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-45 | Map-controlled thermostat | low_side_out | — | — | — | corroborated | |
| OEM-X60003-46 | Idle speed control, close | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-47 | Idle speed control, open | hbridge_out | — | — | — | corroborated | |
| OEM-X60003-48 | Knock sensor shield | shield | G5VOODOOPROV-A-A7 | Shield Ground | shield | corroborated | |
| OEM-X60003-49 | DISA intake flap | low_side_out | — | — | — | corroborated | |
| OEM-X60003-5 | Intake camshaft position | trigger_in | G5VOODOOPROV-A-A30 | Digital Input 1 | digital_in | corroborated | |
| OEM-X60003-7 | Throttle body +5V supply | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-X60003-8 | Crankshaft position | trigger_in | G5VOODOOPROV-A-A8 | Trigger 1 | trigger_in | corroborated | |
| OEM-X60004-10 | Fuel pump relay control | low_side_out | G5VOODOOPROV-B-B2 | Injection 7 | injector_out | corroborated | |
| OEM-X60004-12 | Pedal ground 2 | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-13 | Pedal position signal 2 | analog_in | G5VOODOOPROV-A-A19 | ADIO 3 | analog_in | corroborated | |
| OEM-X60004-14 | Pedal +5V supply 2 | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-X60004-7 | Pedal ground 1 | sensor_ground | G5VOODOOPROV-A-A24 + G5VOODOOPROV-B-B22 | Sensor Ground + Sensor Ground | sensor_ground | corroborated | |
| OEM-X60004-8 | Pedal position signal 1 | analog_in | G5VOODOOPROV-A-A20 | ADIO 2 | analog_in | corroborated | |
| OEM-X60004-9 | Pedal +5V supply 1 | vref | G5VOODOOPROV-A-A32 | +5V Out | vref | corroborated | |
| OEM-X60005-1 | Ignition coil 3 | ignition_out | G5VOODOOPROV-A-A11 | Ignition 3 | ignition_out | corroborated | |
| OEM-X60005-2 | Ignition coil 2 | ignition_out | G5VOODOOPROV-A-A12 | Ignition 2 | ignition_out | corroborated | |
| OEM-X60005-3 | Ignition coil 1 | ignition_out | G5VOODOOPROV-A-A13 | Ignition 1 | ignition_out | corroborated | |
| OEM-X60005-5 | Ignition ground | ground | G5VOODOOPROV-A-A25 + G5VOODOOPROV-A-A34 + G5VOODOOPROV-B-B25 + G5VOODOOPROV-B-B34 + G5VOODOOPROV-E-E21 + G5VOODOOPROV-E-E7 | Ground + Ground + Ground + Ground + Ground + Ground | ground | corroborated | |
| OEM-X60005-7 | Ignition coil 6 | ignition_out | G5VOODOOPROV-B-B12 | Ignition 6 | ignition_out | corroborated | |
| OEM-X60005-8 | Ignition coil 5 | ignition_out | G5VOODOOPROV-B-B13 | Ignition 5 | ignition_out | corroborated | |
| OEM-X60005-9 | Ignition coil 4 | ignition_out | G5VOODOOPROV-A-A10 | Ignition 4 | ignition_out | corroborated |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-X60001-8 | SP-14V-1 | 0.85 | no route | ECU main power (terminal 87 via main relay) | — | |
| W2 | OEM-X60001-9 | SP-14V-1 | 0.85 | no route | Voltage supply (injector / fuse carrier) | — | |
| W3 | SP-14V-1 | G5VOODOOPROV-A-A5 | 0.85 | no route | +14V | — | |
| W4 | SP-14V-1 | G5VOODOOPROV-B-B5 | 0.85 | no route | +14V E-Throttle | — | |
| W5 | OEM-X60001-4 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W6 | OEM-X60001-5 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W7 | OEM-X60001-6 | SP-GND-1 | 0.85 | no route | Power ground | — | |
| W8 | OEM-X60005-5 | SP-GND-1 | 0.85 | no route | Ignition ground | — | |
| W9 | SP-GND-1 | G5VOODOOPROV-A-A25 | 0.85 | no route | Ground | — | |
| W10 | SP-GND-1 | G5VOODOOPROV-A-A34 | 0.85 | no route | Ground | — | |
| W11 | SP-GND-1 | G5VOODOOPROV-B-B25 | 0.85 | no route | Ground | — | |
| W12 | SP-GND-1 | G5VOODOOPROV-B-B34 | 0.85 | no route | Ground | — | |
| W13 | SP-GND-1 | G5VOODOOPROV-E-E21 | 0.85 | no route | Ground | — | |
| W14 | SP-GND-1 | G5VOODOOPROV-E-E7 | 0.85 | no route | Ground | — | |
| W15 | OEM-X60002-20 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 pre-cat | — | |
| W16 | OEM-X60002-21 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 pre-cat | — | |
| W17 | OEM-X60002-22 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 1 post-cat | — | |
| W18 | OEM-X60002-24 | SP-0V-1 | 0.5 | no route | O2 sensor ground, bank 2 post-cat | — | |
| W19 | OEM-X60003-15 | SP-0V-1 | 0.5 | no route | Exhaust camshaft ground | — | |
| W20 | OEM-X60003-17 | SP-0V-1 | 0.5 | no route | MAF ground | — | |
| W21 | OEM-X60003-18 | SP-0V-1 | 0.5 | no route | Intake camshaft ground | — | |
| W22 | OEM-X60003-20 | SP-0V-1 | 0.5 | no route | Throttle ground | — | |
| W23 | OEM-X60003-21 | SP-0V-1 | 0.5 | no route | Crankshaft ground | — | |
| W24 | OEM-X60003-23 | SP-0V-1 | 0.5 | no route | IAT ground | — | |
| W25 | OEM-X60003-25 | SP-0V-1 | 0.5 | no route | ECT ground | — | |
| W26 | OEM-X60003-28 | SP-0V-1 | 0.5 | no route | Oil temperature ground | — | |
| W27 | OEM-X60004-12 | SP-0V-1 | 0.5 | no route | Pedal ground 2 | — | |
| W28 | OEM-X60004-7 | SP-0V-1 | 0.5 | no route | Pedal ground 1 | — | |
| W29 | SP-0V-1 | G5VOODOOPROV-A-A24 | 0.5 | no route | Sensor Ground | — | |
| W30 | SP-0V-1 | G5VOODOOPROV-B-B22 | 0.5 | no route | Sensor Ground | — | |
| W31 | OEM-X60003-7 | SP-5V1-1 | 0.5 | no route | Throttle body +5V supply | — | |
| W32 | OEM-X60004-14 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 2 | — | |
| W33 | OEM-X60004-9 | SP-5V1-1 | 0.5 | no route | Pedal +5V supply 1 | — | |
| W34 | SP-5V1-1 | G5VOODOOPROV-A-A32 | 0.5 | no route | +5V Out | — | |
| W35 | OEM-X60003-8 | G5VOODOOPROV-A-A8 | 0.5 | no route | Crankshaft position | — | |
| W36 | OEM-X60003-2 | G5VOODOOPROV-A-A9 | 0.5 | no route | Exhaust camshaft position | — | |
| W37 | OEM-X60003-5 | G5VOODOOPROV-A-A30 | 0.5 | no route | Intake camshaft position | — | |
| W38 | OEM-X60003-29 | G5VOODOOPROV-B-B9 | 0.5 | no route | Knock sensor, cylinders 1-3 (A) | — | |
| W39 | OEM-X60003-30 | G5VOODOOPROV-B-B8 | 0.5 | no route | Knock sensor, cylinders 1-3 (B) | — | |
| W40 | OEM-X60005-3 | G5VOODOOPROV-A-A13 | 0.5 | no route | Ignition coil 1 | — | |
| W41 | OEM-X60005-2 | G5VOODOOPROV-A-A12 | 0.5 | no route | Ignition coil 2 | — | |
| W42 | OEM-X60005-1 | G5VOODOOPROV-A-A11 | 0.5 | no route | Ignition coil 3 | — | |
| W43 | OEM-X60005-9 | G5VOODOOPROV-A-A10 | 0.5 | no route | Ignition coil 4 | — | |
| W44 | OEM-X60005-8 | G5VOODOOPROV-B-B13 | 0.5 | no route | Ignition coil 5 | — | |
| W45 | OEM-X60005-7 | G5VOODOOPROV-B-B12 | 0.5 | no route | Ignition coil 6 | — | |
| W46 | OEM-X60003-33 | G5VOODOOPROV-A-A4 | 0.5 | no route | Injector cylinder 1 | — | |
| W47 | OEM-X60003-34 | G5VOODOOPROV-A-A3 | 0.5 | no route | Injector cylinder 2 | — | |
| W48 | OEM-X60003-35 | G5VOODOOPROV-A-A2 | 0.5 | no route | Injector cylinder 3 | — | |
| W49 | OEM-X60003-36 | G5VOODOOPROV-A-A1 | 0.5 | no route | Injector cylinder 4 | — | |
| W50 | OEM-X60003-37 | G5VOODOOPROV-B-B4 | 0.5 | no route | Injector cylinder 5 | — | |
| W51 | OEM-X60003-38 | G5VOODOOPROV-B-B3 | 0.5 | no route | Injector cylinder 6 | — | |
| W52 | OEM-X60003-48 | SP-SHD-1 | 0.5 | no route | Knock sensor shield | — | |
| W53 | SP-SHD-1 | G5VOODOOPROV-A-A7 | 0.5 | no route | Shield Ground | — | |
| W54 | OEM-X60003-1 | G5VOODOOPROV-A-A17 | 0.5 | no route | Mass air flow (MAF) signal | — | |
| W55 | OEM-X60003-19 | G5VOODOOPROV-A-A21 | 0.5 | no route | Throttle position sensor 1 | — | |
| W56 | OEM-X60004-8 | G5VOODOOPROV-A-A20 | 0.5 | no route | Pedal position signal 1 | — | |
| W57 | OEM-X60003-10 | G5VOODOOPROV-A-A22 | 0.5 | no route | Throttle position sensor 2 | — | |
| W58 | OEM-X60004-13 | G5VOODOOPROV-A-A19 | 0.5 | no route | Pedal position signal 2 | — | |
| W59 | OEM-X60003-24 | G5VOODOOPROV-A-A15 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W60 | OEM-X60001-1 | G5VOODOOPROV-E-E15 | 0.5 | no route | Injector/unloader relay control (terminal 15) | — | |
| W61 | OEM-X60002-23 | G5VOODOOPROV-E-E22 | 0.5 | no route | Main relay control | — | |
| W62 | OEM-X60004-10 | G5VOODOOPROV-B-B2 | 0.5 | no route | Fuel pump relay control | — | |
| W63 | OEM-X60002-1 | G5VOODOOPROV-B-B1 | 0.5 | no route | O2 sensor heater, bank 1 pre-cat | — | |
| W64 | OEM-X60002-13 | G5VOODOOPROV-E-E4 | 0.5 | no route | O2 sensor heater, bank 2 pre-cat | — | |
| W65 | OEM-X60002-19 | G5VOODOOPROV-E-E3 | 0.5 | no route | O2 sensor heater, bank 2 post-cat | — | |
| W66 | OEM-X60002-7 | G5VOODOOPROV-E-E2 | 0.5 | no route | O2 sensor heater, bank 1 post-cat | — | |
| W67 | OEM-X60003-40 | G5VOODOOPROV-E-E1 | 0.5 | no route | VANOS intake solenoid | — | |
| W68 | OEM-X60002-14 | G5VOODOOPROV-A-A33 | 0.5 | no route | O2 sensor signal, bank 1 pre-cat | — | |
| W69 | OEM-X60002-15 | G5VOODOOPROV-A-A14 | 0.5 | no route | O2 sensor signal, bank 2 pre-cat | — | |
| W70 | OEM-X60002-16 | G5VOODOOPROV-A-A18 | 0.5 | no route | O2 sensor signal, bank 1 post-cat | — | |
| W71 | OEM-X60002-18 | G5VOODOOPROV-A-A29 | 0.5 | no route | O2 sensor signal, bank 2 post-cat | — | |
| W72 | OEM-X60003-22 | G5VOODOOPROV-A-A16 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W73 | OEM-X60003-27 | G5VOODOOPROV-B-B6 | 0.5 | no route | Engine oil temperature | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | BMW-E46-MS43-CONN | BMW | E46 DME (MS43) harness connector | 1.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (11)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | PHYS_REQUIRED_OPEN | G5VOODOOPROV-A-A6 | G5VOODOOPROV-A-A6 "Ignition Switch" is required but not wired. |
| error | REQUIRED_UNMAPPED | OEM-X60003-43 | Required OEM function "Throttle motor drive 1 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-X60003-44 | Required OEM function "Throttle motor drive 2 (H-bridge)" (hbridge_out) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-X60003-5 ↔ G5VOODOOPROV-A-A30 | OEM-X60003-5 "Intake camshaft position" [trigger_in] is wired to G5VOODOOPROV-A-A30 "Digital Input 1" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | NET_FAMILY | OEM-X60002-1 ↔ G5VOODOOPROV-B-B1 | OEM-X60002-1 "O2 sensor heater, bank 1 pre-cat" [low_side_out] is wired to G5VOODOOPROV-B-B1 "Injection 8" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60002-13 ↔ G5VOODOOPROV-E-E4 | OEM-X60002-13 "O2 sensor heater, bank 2 pre-cat" [low_side_out] is wired to G5VOODOOPROV-E-E4 "Injection 9" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60002-19 ↔ G5VOODOOPROV-E-E3 | OEM-X60002-19 "O2 sensor heater, bank 2 post-cat" [low_side_out] is wired to G5VOODOOPROV-E-E3 "Injection 10" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60002-7 ↔ G5VOODOOPROV-E-E2 | OEM-X60002-7 "O2 sensor heater, bank 1 post-cat" [low_side_out] is wired to G5VOODOOPROV-E-E2 "Injection 11" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60003-40 ↔ G5VOODOOPROV-E-E1 | OEM-X60003-40 "VANOS intake solenoid" [low_side_out] is wired to G5VOODOOPROV-E-E1 "Injection 12" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | NET_FAMILY | OEM-X60004-10 ↔ G5VOODOOPROV-B-B2 | OEM-X60004-10 "Fuel pump relay control" [low_side_out] is wired to G5VOODOOPROV-B-B2 "Injection 7" [injector_out]. Injector drivers can usually run general low-side loads; check current and PWM frequency. |
| info | UNMAPPED | OEM | 8 optional OEM pins are not mapped: OEM-X60003-31 Knock sensor, cylinders 4-6 (A); OEM-X60003-32 Knock sensor, cylinders 4-6 (B); OEM-X60003-41 VANOS exhaust solenoid; OEM-X60003-42 Evap purge valve; OEM-X60003-45 Map-controlled thermostat; OEM-X60003-46 Idle speed control, close; OEM-X60003-47 Idle speed control, open; OEM-X60003-49 DISA intake flap |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-X60001-7 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Needs CAN (E46 K-bus/CAN); not documented for this ECU - This car has EWS 3.3 (rolling code) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-X60003 43: Throttle motor drive 1 (H-bridge): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-X60003 44: Throttle motor drive 2 (H-bridge): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - G5VOODOOPROV-A A6: Ignition Switch: required by Link G5 Voodoo Pro V2 but no stock pin feeds it; wire by hand Not wired: - OEM-X60001 7: Battery constant (terminal 30): Link G5 Voodoo Pro V2 has no battery-constant input; not needed - OEM-X60003 31: Knock sensor, cylinders 4-6 (A): no free knock input on Link G5 Voodoo Pro V2 - OEM-X60003 32: Knock sensor, cylinders 4-6 (B): no free knock input on Link G5 Voodoo Pro V2 - OEM-X60003 41: VANOS exhaust solenoid: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-X60003 42: Evap purge valve: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-X60003 45: Map-controlled thermostat: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-X60003 49: DISA intake flap: no free low_side/relay_control/heater_low_side/ls_hs/injector on Link G5 Voodoo Pro V2 - OEM-X60003 46: Idle speed control, close: no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-X60003 47: Idle speed control, open: no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | Link G5 Voodoo Pro V2 Installer I/O Table | https://kb.linkecu.com/__attachments/a_f77d027cd0c72fff9873eaed54ce6e4ec34cf9da8ae01036efdbecbb8c95be0b/G5%20Voodoo%20Pro%20V2%20Installer%20IO%20Table.pdf | — | — | — |
| 2 | community_copy | ms4x.net: Siemens MS43 Pinout | https://www.ms4x.net/index.php?title=Siemens_MS43_Pinout | — | — | — |
| 2 | community_copy | rusefi wiki: 2002 BMW 325 / 2004 BMW 330Ci E46 DME pinout (M54/MS43) | https://github.com/rusefi/rusefi/wiki/2002-BMW-325-and-2004-BMW-330Ci-E46-DME-pinout | — | — | — |