Honda NSX NA2 1997-2005 (C32B) → ECUMASTER EMU Black (auto)
Honda NSX NA2 1997-2005 (C32B) — ECUMASTER — EMU Black
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 5: read the Findings page before cutting any wire |
| Size of the job | 69 wires · 12 connectors · 0 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-13 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-G-10 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-G-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-G-3 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-G-9 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | OEM-A-12 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A-25 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-G-7 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-G-8 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | OEM-A-26 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | OEM-B-13 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | OEM-B-14 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-B-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B-16 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-B-9 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-D-11 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-F-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-F-2 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | OEM-D-10 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | OEM-F-1 | SP-5V1-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-5V1-1 | EMUBLACK-Black-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | OEM-F-14 | EMUBLACK-Black-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-B-8 | EMUBLACK-Black-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-B-7 | EMUBLACK-Black-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-B-6 | EMUBLACK-Black-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-B-5 | EMUBLACK-Black-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-D-13 | EMUBLACK-Black-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-D-2 | EMUBLACK-Black-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A-11 | EMUBLACK-Grey-8 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-24 | EMUBLACK-Grey-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-B-12 | EMUBLACK-Grey-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-B-11 | EMUBLACK-Black-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-B-10 | EMUBLACK-Black-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-B-2 | EMUBLACK-Grey-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A-1 | EMUBLACK-Grey-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A-2 | EMUBLACK-Grey-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A-3 | EMUBLACK-Grey-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A-14 | EMUBLACK-Grey-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A-15 | EMUBLACK-Grey-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A-16 | EMUBLACK-Grey-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A-5 | EMUBLACK-Grey-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-F-19 | EMUBLACK-Grey-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-F-20 | EMUBLACK-Grey-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-D-9 | EMUBLACK-Black-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-F-13 | EMUBLACK-Black-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-F-12 | EMUBLACK-Black-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-D-12 | EMUBLACK-Black-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-D-7 | EMUBLACK-Black-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-F-4 | EMUBLACK-Grey-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A-8 | EMUBLACK-Grey-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A-10 | EMUBLACK-Grey-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-A-22 | EMUBLACK-Grey-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-D-16 | EMUBLACK-Black-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-D-17 | EMUBLACK-Black-35 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-D-18 | EMUBLACK-Black-37 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-D-19 | EMUBLACK-Black-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-D-8 | EMUBLACK-Black-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-C-7 | EMUBLACK-Black-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-F-16 | EMUBLACK-Black-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-F-6 | EMUBLACK-Black-36 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUBLACK-Black-13 | EMUBLACK-Black-29 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | EMUBLACK-Black-13 | EMUBLACK-Black-26 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 3 | EMUBLACK-Black-13 | EMUBLACK-Black-34 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 4 | EMUBLACK-Black-27 | EMUBLACK-Black-13 | open (OL) | power ground must not touch +12 V supply | |
| 5 | EMUBLACK-Black-27 | EMUBLACK-Black-26 | open (OL) | power ground must not touch 5 V sensor reference | |
| 6 | EMUBLACK-Black-27 | EMUBLACK-Black-34 | open (OL) | power ground must not touch 5 V sensor reference | |
| 7 | EMUBLACK-Black-29 | EMUBLACK-Black-26 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 8 | EMUBLACK-Black-29 | EMUBLACK-Black-34 | open (OL) | sensor ground must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUBLACK-Black
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #5 | — | W42 | — | 0.5 | OEM-B-10 | — | — | — |
| 10 | Switch #1 In | — | W67 | — | 0.5 | OEM-C-7 | — | — | — |
| 11 | RS232 TXD | — | — | — | — | — | — | — | — |
| 12 | CAN H | — | — | — | — | — | — | — | — |
| 13 | Battery +12V | — | W7 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Ignition coil #4 | — | W41 | — | 0.5 | OEM-B-11 | — | — | — |
| 15 | EGT in #2 | — | — | — | — | — | — | — | — |
| 16 | Knock Sensor in #2 | — | W37 | — | 0.5 | OEM-D-2 | — | — | — |
| 17 | Analog In #3 | — | W56 | — | 0.5 | OEM-D-12 | — | — | — |
| 18 | TPS In | — | W54 | — | 0.5 | OEM-F-13 | — | — | — |
| 19 | WBO Ip | — | — | — | — | — | — | — | — |
| 2 | EGT in #1 | — | — | — | — | — | — | — | — |
| 20 | VSS In | — | W33 | — | 0.5 | OEM-B-7 | — | — | — |
| 21 | Camsync In #1 | — | W34 | — | 0.5 | OEM-B-6 | — | — | — |
| 22 | WBO Rcal | — | — | — | — | — | — | — | — |
| 23 | Switch #2 In | — | W68 | — | 0.5 | OEM-F-16 | — | — | — |
| 24 | RS232 RXD | — | — | — | — | — | — | — | — |
| 25 | CAN L | — | — | — | — | — | — | — | — |
| 26 | +5V supply | — | W31 | — | 0.5 | OEM-F-14 | — | — | — |
| 27 | Power Ground | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 28 | Ecu Ground | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 29 | Sensor Ground | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Knock Sensor in #1 | — | W36 | — | 0.5 | OEM-D-13 | — | — | — |
| 30 | Analog In #4 | — | W62 | — | 0.5 | OEM-D-16 | — | — | — |
| 31 | Analog In #1 | — | W53 | — | 0.5 | OEM-D-9 | — | — | — |
| 32 | IAT In | — | W66 | — | 0.5 | OEM-D-8 | — | — | — |
| 33 | WBO VGND | — | — | — | — | — | — | — | — |
| 34 | +5V supply | — | W30 | — | 0.5 | SP-5V1-1 | — | — | — |
| 35 | Analog In #5 | — | W63 | — | 0.5 | OEM-D-17 | — | — | — |
| 36 | Switch #3 In | — | W69 | — | 0.5 | OEM-F-6 | — | — | — |
| 37 | Analog In #6 | — | W64 | — | 0.5 | OEM-D-18 | — | — | — |
| 38 | Sensor Ground | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 39 | Sensor Ground | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 4 | Analog In #2 | — | W55 | — | 0.5 | OEM-F-12 | — | — | — |
| 5 | CLT In | — | W57 | — | 0.5 | OEM-D-7 | — | — | — |
| 6 | WBO Vs | — | — | — | — | — | — | — | — |
| 7 | Camsync In #2 | — | W35 | — | 0.5 | OEM-B-5 | — | — | — |
| 8 | Primary trigger | — | W32 | — | 0.5 | OEM-B-8 | — | — | — |
| 9 | Flex Fuel In | — | W65 | — | 0.5 | OEM-D-19 | — | — | — |
EMUBLACK-Grey
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition coil #6 | — | W43 | — | 0.5 | OEM-B-2 | — | — | — |
| 10 | H-Bridge #1 Winding B | — | — | — | — | — | — | — | — |
| 11 | H-Bridge #2 Winding B | — | — | — | — | — | — | — | — |
| 12 | AUX 5 | — | W59 | — | 0.5 | OEM-A-8 | — | — | — |
| 13 | AUX 2 / Injector #8 | — | W51 | — | 0.5 | OEM-F-19 | — | — | — |
| 14 | Injector #5 | — | W48 | — | 0.5 | OEM-A-15 | — | — | — |
| 15 | Injector #2 | — | W45 | — | 0.5 | OEM-A-2 | — | — | — |
| 16 | Ignition coil #2 | — | W39 | — | 0.5 | OEM-A-24 | — | — | — |
| 17 | Power Ground | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition +12V | — | — | — | — | — | — | — | — |
| 19 | WBO Heater | — | W60 | — | 0.5 | OEM-A-10 | — | — | — |
| 2 | H-Bridge #1 Winding A | — | — | — | — | — | — | — | — |
| 20 | AUX 4 / Tacho | — | W58 | — | 0.5 | OEM-F-4 | — | — | — |
| 21 | AUX 1 / Injector #7 | — | W50 | — | 0.5 | OEM-A-5 | — | — | — |
| 22 | Injector #6 | — | W49 | — | 0.5 | OEM-A-16 | — | — | — |
| 23 | Injector #3 | — | W46 | — | 0.5 | OEM-A-3 | — | — | — |
| 24 | Power Ground | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| 3 | H-Bridge #2 Winding A | — | — | — | — | — | — | — | — |
| 4 | AUX 6 | — | W61 | — | 0.5 | OEM-A-22 | — | — | — |
| 5 | AUX 3 | — | W52 | — | 0.5 | OEM-F-20 | — | — | — |
| 6 | Injector #4 | — | W47 | — | 0.5 | OEM-A-14 | — | — | — |
| 7 | Injector #1 | — | W44 | — | 0.5 | OEM-A-1 | — | — | — |
| 8 | Ignition coil #1 | — | W38 | — | 0.5 | OEM-A-11 | — | — | — |
| 9 | Ignition coil #3 | — | W40 | — | 0.5 | OEM-B-12 | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 1 (INJ1) | — | W44 | — | 0.5 | EMUBLACK-Grey-7 | — | — | — |
| 10 | Rear secondary O2 heater (RSO2SHTC) | — | W60 | — | 0.5 | EMUBLACK-Grey-19 | — | — | — |
| 11 | Ignition coil 1 (IGN COIL1) | — | W38 | — | 0.5 | EMUBLACK-Grey-8 | — | — | — |
| 12 | Power ground (PG1) | — | W8 | — | 0.85 | SP-GND-1 | — | — | — |
| 13 | ECM power source (IGP1) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Injector 4 (INJ4) | — | W47 | — | 0.5 | EMUBLACK-Grey-6 | — | — | — |
| 15 | Injector 5 (INJ5) | — | W48 | — | 0.5 | EMUBLACK-Grey-14 | — | — | — |
| 16 | Injector 6 (INJ6) | — | W49 | — | 0.5 | EMUBLACK-Grey-22 | — | — | — |
| 17 | EVAP bypass solenoid (2WBS) | — | — | — | — | — | — | — | — |
| 2 | Injector 2 (INJ2) | — | W45 | — | 0.5 | EMUBLACK-Grey-15 | — | — | — |
| 20 | IAB control solenoid (IABCS) | — | — | — | — | — | — | — | — |
| 21 | EVAP purge control solenoid (PCS) | — | — | — | — | — | — | — | — |
| 22 | Front primary O2 heater (FPO2SHTC) | — | W61 | — | 0.5 | EMUBLACK-Grey-4 | — | — | — |
| 23 | Rear primary O2 heater (RPO2SHTC) | — | — | — | — | — | — | — | — |
| 24 | Ignition coil 2 (IGN COIL2) | — | W39 | — | 0.5 | EMUBLACK-Grey-16 | — | — | — |
| 25 | Power ground (PG2) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 26 | Logic ground (LG1) | — | W16 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Injector 3 (INJ3) | — | W46 | — | 0.5 | EMUBLACK-Grey-23 | — | — | — |
| 4 | EVAP canister vent shut valve (VSV) | — | — | — | — | — | — | — | — |
| 5 | Fuel pump relay (FLR1) | — | W50 | — | 0.5 | EMUBLACK-Grey-21 | — | — | — |
| 6 | EGR control solenoid (ESOL) | — | — | — | — | — | — | — | — |
| 7 | Malfunction indicator lamp (MIL) | — | — | — | — | — | — | — | — |
| 8 | A/C clutch relay (ACC) | — | W59 | — | 0.5 | EMUBLACK-Grey-12 | — | — | — |
| 9 | Front secondary O2 heater (FSO2SHTC) | — | — | — | — | — | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | VTEC pressure switch front (VTP SWF) | — | — | — | — | — | — | — | — |
| 10 | Ignition coil 5 (IGN COIL5) | — | W42 | — | 0.5 | EMUBLACK-Black-1 | — | — | — |
| 11 | Ignition coil 4 (IGN COIL4) | — | W41 | — | 0.5 | EMUBLACK-Black-14 | — | — | — |
| 12 | Ignition coil 3 (IGN COIL3) | — | W40 | — | 0.5 | EMUBLACK-Grey-9 | — | — | — |
| 13 | Cylinder position sensor 2 return (CYP 2M) | — | W17 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Cylinder position sensor 1 return (CYP 1M) | — | W18 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Crank position sensor 2 return (CKP 2M) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Crank position sensor 1 return (CKP 1M) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Ignition coil 6 (IGN COIL6) | — | W43 | — | 0.5 | EMUBLACK-Grey-1 | — | — | — |
| 3 | VTEC pressure switch rear (VTP SWR) | — | — | — | — | — | — | — | — |
| 4 | Neutral switch (NT SW, M/T) | — | — | — | — | — | — | — | — |
| 5 | Cylinder position sensor 2 + (CYP 2P) | — | W35 | — | 0.5 | EMUBLACK-Black-7 | — | — | — |
| 6 | Cylinder position sensor 1 + (CYP 1P) | — | W34 | — | 0.5 | EMUBLACK-Black-21 | — | — | — |
| 7 | Crank position sensor 2 + (CKP 2P) | — | W33 | — | 0.5 | EMUBLACK-Black-20 | — | — | — |
| 8 | Crank position sensor 1 + (CKP 1P) | — | W32 | — | 0.5 | EMUBLACK-Black-8 | — | — | — |
| 9 | Logic ground (LG2) | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
OEM-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECM power source (IGP2) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Clutch switch (MTCLS, M/T) | — | — | — | — | — | — | — | — |
| 6 | Starter switch (STS) | — | — | — | — | — | — | — | — |
| 7 | Vehicle speed sensor (VSS) | — | W67 | — | 0.5 | EMUBLACK-Black-10 | — | — | — |
| 8 | Engine speed pulse (NEP) | — | — | — | — | — | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Backup power (VBU) | — | — | — | — | — | — | — | — |
| 10 | Sensor 5V supply (VCC2) | — | W28 | — | 0.5 | SP-5V1-1 | — | — | — |
| 11 | Sensor ground (SG2) | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 12 | Throttle position sensor (TPS) | — | W56 | — | 0.5 | EMUBLACK-Black-17 | — | — | — |
| 13 | Knock sensor front (KSF) | — | W36 | — | 0.5 | EMUBLACK-Black-3 | — | — | — |
| 16 | Front secondary O2 signal (O2S FS) | — | W62 | — | 0.5 | EMUBLACK-Black-30 | — | — | — |
| 17 | Rear secondary O2 signal (O2S RS) | — | W63 | — | 0.5 | EMUBLACK-Black-35 | — | — | — |
| 18 | Front primary O2 signal (O2S FP) | — | W64 | — | 0.5 | EMUBLACK-Black-37 | — | — | — |
| 19 | Rear primary O2 signal (O2S RP) | — | W65 | — | 0.5 | EMUBLACK-Black-9 | — | — | — |
| 2 | Knock sensor rear (KSR) | — | W37 | — | 0.5 | EMUBLACK-Black-16 | — | — | — |
| 20 | EGR valve lift sensor (EGRL) | — | — | — | — | — | — | — | — |
| 4 | K-line diagnostics | — | — | — | — | — | — | — | — |
| 7 | Engine coolant temperature (ECT) | — | W57 | — | 0.5 | EMUBLACK-Black-5 | — | — | — |
| 8 | Intake air temperature (IAT) | — | W66 | — | 0.5 | EMUBLACK-Black-32 | — | — | — |
| 9 | MAP sensor | — | W53 | — | 0.5 | EMUBLACK-Black-31 | — | — | — |
OEM-F
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor 5V supply (VCC1) | — | W29 | — | 0.5 | SP-5V1-1 | — | — | — |
| 12 | Accelerator pedal position 2 (AP2) | — | W55 | — | 0.5 | EMUBLACK-Black-4 | — | — | — |
| 13 | Accelerator pedal position 1 (AP1) | — | W54 | — | 0.5 | EMUBLACK-Black-18 | — | — | — |
| 14 | Accelerator pedal 5V supply (VCC3) | — | W31 | — | 0.5 | EMUBLACK-Black-26 | — | — | — |
| 15 | Accelerator pedal ground (SG3) | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Brake switch 1 (BKSW1) | — | W68 | — | 0.5 | EMUBLACK-Black-23 | — | — | — |
| 19 | VTEC solenoid front (VT SOLF) | — | W51 | — | 0.5 | EMUBLACK-Grey-13 | — | — | — |
| 2 | Sensor ground (SG1) | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | VTEC solenoid rear (VT SOLR) | — | W52 | — | 0.5 | EMUBLACK-Grey-5 | — | — | — |
| 4 | Fuel pump relay 2 (FLR2) | — | W58 | — | 0.5 | EMUBLACK-Grey-20 | — | — | — |
| 6 | Brake switch 2 (BKSW2) | — | W69 | — | 0.5 | EMUBLACK-Black-36 | — | — | — |
OEM-G
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Throttle motor common power phases 2&4 (COM2) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 11 | Throttle motor phase 3 (PM3) | — | — | — | — | — | — | — | — |
| 12 | Throttle motor phase 4 (PM4) | — | — | — | — | — | — | — | — |
| 2 | Throttle motor power source 1 (IGM1) | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Throttle motor power source 2 (IGM2) | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Throttle motor phase 1 (PM1) | — | — | — | — | — | — | — | — |
| 5 | Throttle motor phase 2 (PM2) | — | — | — | — | — | — | — | — |
| 7 | Throttle motor ground 1 (PGM1) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | Throttle motor ground 2 (PGM2) | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Throttle motor common power phases 1&3 (COM1) | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W16 | — | 0.5 | OEM-A-26 | — | — | — |
| 1 | — | — | W17 | — | 0.5 | OEM-B-13 | — | — | — |
| 1 | — | — | W18 | — | 0.5 | OEM-B-14 | — | — | — |
| 1 | — | — | W19 | — | 0.5 | OEM-B-15 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-B-16 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-B-9 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-D-11 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-F-15 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-F-2 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | EMUBLACK-Black-29 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | EMUBLACK-Black-38 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | EMUBLACK-Black-39 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-13 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C-1 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-G-10 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-G-2 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-G-3 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-G-9 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | EMUBLACK-Black-13 | — | — | — |
SP-5V1
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W28 | — | 0.5 | OEM-D-10 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | OEM-F-1 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | EMUBLACK-Black-34 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W8 | — | 0.85 | OEM-A-12 | — | — | — |
| 1 | — | — | W9 | — | 0.85 | OEM-A-25 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-G-7 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-G-8 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | EMUBLACK-Black-27 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | EMUBLACK-Black-28 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | EMUBLACK-Grey-17 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | EMUBLACK-Grey-24 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Injector 1 (INJ1) | injector_out | EMUBLACK-Grey-7 | Injector #1 | injector_out | single_source | |
| OEM-A-10 | Rear secondary O2 heater (RSO2SHTC) | low_side_out | EMUBLACK-Grey-19 | WBO Heater | low_side_out | single_source | |
| OEM-A-11 | Ignition coil 1 (IGN COIL1) | ignition_out | EMUBLACK-Grey-8 | Ignition coil #1 | ignition_out | single_source | |
| OEM-A-12 | Power ground (PG1) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A-13 | ECM power source (IGP1) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-A-14 | Injector 4 (INJ4) | injector_out | EMUBLACK-Grey-6 | Injector #4 | injector_out | single_source | |
| OEM-A-15 | Injector 5 (INJ5) | injector_out | EMUBLACK-Grey-14 | Injector #5 | injector_out | single_source | |
| OEM-A-16 | Injector 6 (INJ6) | injector_out | EMUBLACK-Grey-22 | Injector #6 | injector_out | single_source | |
| OEM-A-17 | EVAP bypass solenoid (2WBS) | low_side_out | — | — | — | single_source | |
| OEM-A-2 | Injector 2 (INJ2) | injector_out | EMUBLACK-Grey-15 | Injector #2 | injector_out | single_source | |
| OEM-A-20 | IAB control solenoid (IABCS) | low_side_out | — | — | — | single_source | |
| OEM-A-21 | EVAP purge control solenoid (PCS) | low_side_out | — | — | — | single_source | |
| OEM-A-22 | Front primary O2 heater (FPO2SHTC) | low_side_out | EMUBLACK-Grey-4 | AUX 6 | low_side_out | single_source | |
| OEM-A-23 | Rear primary O2 heater (RPO2SHTC) | low_side_out | — | — | — | single_source | |
| OEM-A-24 | Ignition coil 2 (IGN COIL2) | ignition_out | EMUBLACK-Grey-16 | Ignition coil #2 | ignition_out | single_source | |
| OEM-A-25 | Power ground (PG2) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-A-26 | Logic ground (LG1) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-A-3 | Injector 3 (INJ3) | injector_out | EMUBLACK-Grey-23 | Injector #3 | injector_out | single_source | |
| OEM-A-4 | EVAP canister vent shut valve (VSV) | low_side_out | — | — | — | single_source | |
| OEM-A-5 | Fuel pump relay (FLR1) | low_side_out | EMUBLACK-Grey-21 | AUX 1 / Injector #7 | low_side_out | single_source | |
| OEM-A-6 | EGR control solenoid (ESOL) | low_side_out | — | — | — | single_source | |
| OEM-A-7 | Malfunction indicator lamp (MIL) | low_side_out | — | — | — | single_source | |
| OEM-A-8 | A/C clutch relay (ACC) | low_side_out | EMUBLACK-Grey-12 | AUX 5 | low_side_out | single_source | |
| OEM-A-9 | Front secondary O2 heater (FSO2SHTC) | low_side_out | — | — | — | single_source | |
| OEM-B-1 | VTEC pressure switch front (VTP SWF) | digital_in | — | — | — | single_source | |
| OEM-B-10 | Ignition coil 5 (IGN COIL5) | ignition_out | EMUBLACK-Black-1 | Ignition coil #5 | ignition_out | single_source | |
| OEM-B-11 | Ignition coil 4 (IGN COIL4) | ignition_out | EMUBLACK-Black-14 | Ignition coil #4 | ignition_out | single_source | |
| OEM-B-12 | Ignition coil 3 (IGN COIL3) | ignition_out | EMUBLACK-Grey-9 | Ignition coil #3 | ignition_out | single_source | |
| OEM-B-13 | Cylinder position sensor 2 return (CYP 2M) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-14 | Cylinder position sensor 1 return (CYP 1M) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-15 | Crank position sensor 2 return (CKP 2M) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-16 | Crank position sensor 1 return (CKP 1M) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-B-2 | Ignition coil 6 (IGN COIL6) | ignition_out | EMUBLACK-Grey-1 | Ignition coil #6 | ignition_out | single_source | |
| OEM-B-3 | VTEC pressure switch rear (VTP SWR) | digital_in | — | — | — | single_source | |
| OEM-B-4 | Neutral switch (NT SW, M/T) | digital_in | — | — | — | single_source | |
| OEM-B-5 | Cylinder position sensor 2 + (CYP 2P) | trigger_in | EMUBLACK-Black-7 | Camsync In #2 | trigger_in | single_source | |
| OEM-B-6 | Cylinder position sensor 1 + (CYP 1P) | trigger_in | EMUBLACK-Black-21 | Camsync In #1 | trigger_in | single_source | |
| OEM-B-7 | Crank position sensor 2 + (CKP 2P) | trigger_in | EMUBLACK-Black-20 | VSS In | digital_in | single_source | |
| OEM-B-8 | Crank position sensor 1 + (CKP 1P) | trigger_in | EMUBLACK-Black-8 | Primary trigger | trigger_in | single_source | |
| OEM-B-9 | Logic ground (LG2) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-C-1 | ECM power source (IGP2) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-C-4 | Clutch switch (MTCLS, M/T) | digital_in | — | — | — | single_source | |
| OEM-C-6 | Starter switch (STS) | digital_in | — | — | — | single_source | |
| OEM-C-7 | Vehicle speed sensor (VSS) | digital_in | EMUBLACK-Black-10 | Switch #1 In | digital_in | single_source | |
| OEM-C-8 | Engine speed pulse (NEP) | tacho_out | — | — | — | single_source | |
| OEM-D-1 | Backup power (VBU) | power_in | — | — | — | single_source | |
| OEM-D-10 | Sensor 5V supply (VCC2) | vref | EMUBLACK-Black-34 | +5V supply | vref | single_source | |
| OEM-D-11 | Sensor ground (SG2) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-D-12 | Throttle position sensor (TPS) | analog_in | EMUBLACK-Black-17 | Analog In #3 | analog_in | single_source | |
| OEM-D-13 | Knock sensor front (KSF) | knock_in | EMUBLACK-Black-3 | Knock Sensor in #1 | knock_in | single_source | |
| OEM-D-16 | Front secondary O2 signal (O2S FS) | lambda_nb_in | EMUBLACK-Black-30 | Analog In #4 | analog_in | single_source | |
| OEM-D-17 | Rear secondary O2 signal (O2S RS) | lambda_nb_in | EMUBLACK-Black-35 | Analog In #5 | analog_in | single_source | |
| OEM-D-18 | Front primary O2 signal (O2S FP) | lambda_nb_in | EMUBLACK-Black-37 | Analog In #6 | analog_in | single_source | |
| OEM-D-19 | Rear primary O2 signal (O2S RP) | lambda_nb_in | EMUBLACK-Black-9 | Flex Fuel In | analog_in | single_source | |
| OEM-D-2 | Knock sensor rear (KSR) | knock_in | EMUBLACK-Black-16 | Knock Sensor in #2 | knock_in | single_source | |
| OEM-D-20 | EGR valve lift sensor (EGRL) | analog_in | — | — | — | single_source | |
| OEM-D-4 | K-line diagnostics | serial | — | — | — | single_source | |
| OEM-D-7 | Engine coolant temperature (ECT) | temp_in | EMUBLACK-Black-5 | CLT In | temp_in | single_source | |
| OEM-D-8 | Intake air temperature (IAT) | temp_in | EMUBLACK-Black-32 | IAT In | temp_in | single_source | |
| OEM-D-9 | MAP sensor | analog_in | EMUBLACK-Black-31 | Analog In #1 | analog_in | single_source | |
| OEM-F-1 | Sensor 5V supply (VCC1) | vref | EMUBLACK-Black-34 | +5V supply | vref | single_source | |
| OEM-F-12 | Accelerator pedal position 2 (AP2) | analog_in | EMUBLACK-Black-4 | Analog In #2 | analog_in | single_source | |
| OEM-F-13 | Accelerator pedal position 1 (AP1) | analog_in | EMUBLACK-Black-18 | TPS In | analog_in | single_source | |
| OEM-F-14 | Accelerator pedal 5V supply (VCC3) | vref | EMUBLACK-Black-26 | +5V supply | vref | single_source | |
| OEM-F-15 | Accelerator pedal ground (SG3) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-F-16 | Brake switch 1 (BKSW1) | digital_in | EMUBLACK-Black-23 | Switch #2 In | digital_in | single_source | |
| OEM-F-19 | VTEC solenoid front (VT SOLF) | low_side_out | EMUBLACK-Grey-13 | AUX 2 / Injector #8 | low_side_out | single_source | |
| OEM-F-2 | Sensor ground (SG1) | sensor_ground | EMUBLACK-Black-29 + EMUBLACK-Black-38 + EMUBLACK-Black-39 | Sensor Ground + Sensor Ground + Sensor Ground | sensor_ground | single_source | |
| OEM-F-20 | VTEC solenoid rear (VT SOLR) | low_side_out | EMUBLACK-Grey-5 | AUX 3 | low_side_out | single_source | |
| OEM-F-4 | Fuel pump relay 2 (FLR2) | low_side_out | EMUBLACK-Grey-20 | AUX 4 / Tacho | low_side_out | single_source | |
| OEM-F-6 | Brake switch 2 (BKSW2) | digital_in | EMUBLACK-Black-36 | Switch #3 In | digital_in | single_source | |
| OEM-G-10 | Throttle motor common power phases 2&4 (COM2) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-G-11 | Throttle motor phase 3 (PM3) | hbridge_out | — | — | — | single_source | |
| OEM-G-12 | Throttle motor phase 4 (PM4) | hbridge_out | — | — | — | single_source | |
| OEM-G-2 | Throttle motor power source 1 (IGM1) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-G-3 | Throttle motor power source 2 (IGM2) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source | |
| OEM-G-4 | Throttle motor phase 1 (PM1) | hbridge_out | — | — | — | single_source | |
| OEM-G-5 | Throttle motor phase 2 (PM2) | hbridge_out | — | — | — | single_source | |
| OEM-G-7 | Throttle motor ground 1 (PGM1) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-G-8 | Throttle motor ground 2 (PGM2) | ground | EMUBLACK-Black-27 + EMUBLACK-Black-28 + EMUBLACK-Grey-17 + EMUBLACK-Grey-24 | Power Ground + Ecu Ground + Power Ground + Power Ground | ground | single_source | |
| OEM-G-9 | Throttle motor common power phases 1&3 (COM1) | power_in | EMUBLACK-Black-13 | Battery +12V | power_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-13 | SP-14V-1 | 0.85 | no route | ECM power source (IGP1) | — | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | no route | ECM power source (IGP2) | — | |
| W3 | OEM-G-10 | SP-14V-1 | 0.85 | no route | Throttle motor common power phases 2&4 (COM2) | — | |
| W4 | OEM-G-2 | SP-14V-1 | 0.85 | no route | Throttle motor power source 1 (IGM1) | — | |
| W5 | OEM-G-3 | SP-14V-1 | 0.85 | no route | Throttle motor power source 2 (IGM2) | — | |
| W6 | OEM-G-9 | SP-14V-1 | 0.85 | no route | Throttle motor common power phases 1&3 (COM1) | — | |
| W7 | SP-14V-1 | EMUBLACK-Black-13 | 0.85 | no route | Battery +12V | — | |
| W8 | OEM-A-12 | SP-GND-1 | 0.85 | no route | Power ground (PG1) | — | |
| W9 | OEM-A-25 | SP-GND-1 | 0.85 | no route | Power ground (PG2) | — | |
| W10 | OEM-G-7 | SP-GND-1 | 0.85 | no route | Throttle motor ground 1 (PGM1) | — | |
| W11 | OEM-G-8 | SP-GND-1 | 0.85 | no route | Throttle motor ground 2 (PGM2) | — | |
| W12 | SP-GND-1 | EMUBLACK-Black-27 | 0.85 | no route | Power Ground | — | |
| W13 | SP-GND-1 | EMUBLACK-Black-28 | 0.85 | no route | Ecu Ground | — | |
| W14 | SP-GND-1 | EMUBLACK-Grey-17 | 0.85 | no route | Power Ground | — | |
| W15 | SP-GND-1 | EMUBLACK-Grey-24 | 0.85 | no route | Power Ground | — | |
| W16 | OEM-A-26 | SP-0V-1 | 0.5 | no route | Logic ground (LG1) | — | |
| W17 | OEM-B-13 | SP-0V-1 | 0.5 | no route | Cylinder position sensor 2 return (CYP 2M) | — | |
| W18 | OEM-B-14 | SP-0V-1 | 0.5 | no route | Cylinder position sensor 1 return (CYP 1M) | — | |
| W19 | OEM-B-15 | SP-0V-1 | 0.5 | no route | Crank position sensor 2 return (CKP 2M) | — | |
| W20 | OEM-B-16 | SP-0V-1 | 0.5 | no route | Crank position sensor 1 return (CKP 1M) | — | |
| W21 | OEM-B-9 | SP-0V-1 | 0.5 | no route | Logic ground (LG2) | — | |
| W22 | OEM-D-11 | SP-0V-1 | 0.5 | no route | Sensor ground (SG2) | — | |
| W23 | OEM-F-15 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (SG3) | — | |
| W24 | OEM-F-2 | SP-0V-1 | 0.5 | no route | Sensor ground (SG1) | — | |
| W25 | SP-0V-1 | EMUBLACK-Black-29 | 0.5 | no route | Sensor Ground | — | |
| W26 | SP-0V-1 | EMUBLACK-Black-38 | 0.5 | no route | Sensor Ground | — | |
| W27 | SP-0V-1 | EMUBLACK-Black-39 | 0.5 | no route | Sensor Ground | — | |
| W28 | OEM-D-10 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VCC2) | — | |
| W29 | OEM-F-1 | SP-5V1-1 | 0.5 | no route | Sensor 5V supply (VCC1) | — | |
| W30 | SP-5V1-1 | EMUBLACK-Black-34 | 0.5 | no route | +5V supply | — | |
| W31 | OEM-F-14 | EMUBLACK-Black-26 | 0.5 | no route | Accelerator pedal 5V supply (VCC3) | — | |
| W32 | OEM-B-8 | EMUBLACK-Black-8 | 0.5 | no route | Crank position sensor 1 + (CKP 1P) | — | |
| W33 | OEM-B-7 | EMUBLACK-Black-20 | 0.5 | no route | Crank position sensor 2 + (CKP 2P) | — | |
| W34 | OEM-B-6 | EMUBLACK-Black-21 | 0.5 | no route | Cylinder position sensor 1 + (CYP 1P) | — | |
| W35 | OEM-B-5 | EMUBLACK-Black-7 | 0.5 | no route | Cylinder position sensor 2 + (CYP 2P) | — | |
| W36 | OEM-D-13 | EMUBLACK-Black-3 | 0.5 | no route | Knock sensor front (KSF) | — | |
| W37 | OEM-D-2 | EMUBLACK-Black-16 | 0.5 | no route | Knock sensor rear (KSR) | — | |
| W38 | OEM-A-11 | EMUBLACK-Grey-8 | 0.5 | no route | Ignition coil 1 (IGN COIL1) | — | |
| W39 | OEM-A-24 | EMUBLACK-Grey-16 | 0.5 | no route | Ignition coil 2 (IGN COIL2) | — | |
| W40 | OEM-B-12 | EMUBLACK-Grey-9 | 0.5 | no route | Ignition coil 3 (IGN COIL3) | — | |
| W41 | OEM-B-11 | EMUBLACK-Black-14 | 0.5 | no route | Ignition coil 4 (IGN COIL4) | — | |
| W42 | OEM-B-10 | EMUBLACK-Black-1 | 0.5 | no route | Ignition coil 5 (IGN COIL5) | — | |
| W43 | OEM-B-2 | EMUBLACK-Grey-1 | 0.5 | no route | Ignition coil 6 (IGN COIL6) | — | |
| W44 | OEM-A-1 | EMUBLACK-Grey-7 | 0.5 | no route | Injector 1 (INJ1) | — | |
| W45 | OEM-A-2 | EMUBLACK-Grey-15 | 0.5 | no route | Injector 2 (INJ2) | — | |
| W46 | OEM-A-3 | EMUBLACK-Grey-23 | 0.5 | no route | Injector 3 (INJ3) | — | |
| W47 | OEM-A-14 | EMUBLACK-Grey-6 | 0.5 | no route | Injector 4 (INJ4) | — | |
| W48 | OEM-A-15 | EMUBLACK-Grey-14 | 0.5 | no route | Injector 5 (INJ5) | — | |
| W49 | OEM-A-16 | EMUBLACK-Grey-22 | 0.5 | no route | Injector 6 (INJ6) | — | |
| W50 | OEM-A-5 | EMUBLACK-Grey-21 | 0.5 | no route | Fuel pump relay (FLR1) | — | |
| W51 | OEM-F-19 | EMUBLACK-Grey-13 | 0.5 | no route | VTEC solenoid front (VT SOLF) | — | |
| W52 | OEM-F-20 | EMUBLACK-Grey-5 | 0.5 | no route | VTEC solenoid rear (VT SOLR) | — | |
| W53 | OEM-D-9 | EMUBLACK-Black-31 | 0.5 | no route | MAP sensor | — | |
| W54 | OEM-F-13 | EMUBLACK-Black-18 | 0.5 | no route | Accelerator pedal position 1 (AP1) | — | |
| W55 | OEM-F-12 | EMUBLACK-Black-4 | 0.5 | no route | Accelerator pedal position 2 (AP2) | — | |
| W56 | OEM-D-12 | EMUBLACK-Black-17 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W57 | OEM-D-7 | EMUBLACK-Black-5 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W58 | OEM-F-4 | EMUBLACK-Grey-20 | 0.5 | no route | Fuel pump relay 2 (FLR2) | — | |
| W59 | OEM-A-8 | EMUBLACK-Grey-12 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W60 | OEM-A-10 | EMUBLACK-Grey-19 | 0.5 | no route | Rear secondary O2 heater (RSO2SHTC) | — | |
| W61 | OEM-A-22 | EMUBLACK-Grey-4 | 0.5 | no route | Front primary O2 heater (FPO2SHTC) | — | |
| W62 | OEM-D-16 | EMUBLACK-Black-30 | 0.5 | no route | Front secondary O2 signal (O2S FS) | — | |
| W63 | OEM-D-17 | EMUBLACK-Black-35 | 0.5 | no route | Rear secondary O2 signal (O2S RS) | — | |
| W64 | OEM-D-18 | EMUBLACK-Black-37 | 0.5 | no route | Front primary O2 signal (O2S FP) | — | |
| W65 | OEM-D-19 | EMUBLACK-Black-9 | 0.5 | no route | Rear primary O2 signal (O2S RP) | — | |
| W66 | OEM-D-8 | EMUBLACK-Black-32 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W67 | OEM-C-7 | EMUBLACK-Black-10 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W68 | OEM-F-16 | EMUBLACK-Black-23 | 0.5 | no route | Brake switch 1 (BKSW1) | — | |
| W69 | OEM-F-6 | EMUBLACK-Black-36 | 0.5 | no route | Brake switch 2 (BKSW2) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (7)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 0 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | REQUIRED_UNMAPPED | OEM-G-11 | Required OEM function "Throttle motor phase 3 (PM3)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-12 | Required OEM function "Throttle motor phase 4 (PM4)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-4 | Required OEM function "Throttle motor phase 1 (PM1)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-5 | Required OEM function "Throttle motor phase 2 (PM2)" (hbridge_out) is not connected to the new ECU. |
| warn | NET_FAMILY | OEM-B-7 ↔ EMUBLACK-Black-20 | OEM-B-7 "Crank position sensor 2 + (CKP 2P)" [trigger_in] is wired to EMUBLACK-Black-20 "VSS In" [digital_in]. Hall-type cam/speed signals can use a digital input if it handles the frequency; VR signals cannot. |
| info | UNMAPPED | OEM | 16 optional OEM pins are not mapped: OEM-A-17 EVAP bypass solenoid (2WBS); OEM-A-20 IAB control solenoid (IABCS); OEM-A-21 EVAP purge control solenoid (PCS); OEM-A-23 Rear primary O2 heater (RPO2SHTC); OEM-A-4 EVAP canister vent shut valve (VSV); OEM-A-6 EGR control solenoid (ESOL); OEM-A-7 Malfunction indicator lamp (MIL); OEM-A-9 Front secondary O2 heater (FSO2SHTC); OEM-B-1 VTEC pressure switch front (VTP SWF); OEM-B-3 VTEC pressure switch rear (VTP SWR); OEM-B-4 Neutral switch (NT SW, M/T); OEM-C-4 Clutch switch (MTCLS, M/T); OEM-C-6 Starter switch (STS); OEM-C-8 Engine speed pulse (NEP); OEM-D-20 EGR valve lift sensor (EGRL); OEM-D-4 K-line diagnostics |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-D-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for Honda C32B not found in the ECU's docs (No C32B (NSX) trigger named.) - This car has Honda Type 1A (1997+) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-G 4: Throttle motor phase 1 (PM1): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 5: Throttle motor phase 2 (PM2): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 11: Throttle motor phase 3 (PM3): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 12: Throttle motor phase 4 (PM4): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand Not wired: - OEM-D 1: Backup power (VBU): ECUMASTER EMU Black has no battery-constant input; not needed - OEM-A 23: Rear primary O2 heater (RPO2SHTC): no free heater_low_side/low_side/relay_control/ls_hs/injector on ECUMASTER EMU Black - OEM-A 9: Front secondary O2 heater (FSO2SHTC): no free heater_low_side/low_side/relay_control/ls_hs/injector on ECUMASTER EMU Black - OEM-A 17: EVAP bypass solenoid (2WBS): no free low_side/relay_control/heater_low_side/ls_hs/injector on ECUMASTER EMU Black - OEM-A 20: IAB control solenoid (IABCS): no free low_side/relay_control/heater_low_side/ls_hs/injector on ECUMASTER EMU Black - OEM-A 21: EVAP purge control solenoid (PCS): no free low_side/relay_control/heater_low_side/ls_hs/injector on ECUMASTER EMU Black - OEM-A 4: EVAP canister vent shut valve (VSV): no free low_side/relay_control/heater_low_side/ls_hs/injector on ECUMASTER EMU Black - OEM-A 6: EGR control solenoid (ESOL): no free low_side/relay_control/heater_low_side/ls_hs/injector on ECUMASTER EMU Black - OEM-A 7: Malfunction indicator lamp (MIL): no free low_side/relay_control/heater_low_side/ls_hs/injector on ECUMASTER EMU Black - OEM-C 8: Engine speed pulse (NEP): no free tacho/frequency_out/low_side/ls_hs on ECUMASTER EMU Black - OEM-D 20: EGR valve lift sensor (EGRL): no free analog_0_5 on ECUMASTER EMU Black - OEM-B 1: VTEC pressure switch front (VTP SWF): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-B 3: VTEC pressure switch rear (VTP SWR): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-B 4: Neutral switch (NT SW, M/T): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-C 4: Clutch switch (MTCLS, M/T): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-C 6: Starter switch (STS): no free switch_in/frequency_in/analog_0_5 on ECUMASTER EMU Black - OEM-D 4: K-line diagnostics: no free k_line on ECUMASTER EMU Black - EMUBLACK-Grey 18: Ignition +12V: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | 1997-2005 Acura NSX Service Manual §11 (PGM-FI), ECM terminal arrangement | https://www.manualslib.com/manual/1540331/Acura-Nsx-1997.html | — | — | — |
| 4 | vendor_doc | ECUMASTER EMU Black — pinout (Black 39-pin / Grey 24-pin) | https://www.ecumaster.com/wp/wp-content/uploads/2020/05/EMU_Black_pinout.pdf | archive | 2026-10-05 | 096b2b4df1bd |