Honda NSX NA2 1997-2005 (C32B) → ECUMASTER EMU PRO 16 (auto)
Honda NSX NA2 1997-2005 (C32B) — ECUMASTER — EMU PRO 16
⚠ NOT CHECKED. Don't build from this.
Drawn by Michael Gnankou · Rev 0 · draft · 2026-10-12
Before you start
Not confident with automotive wiring? Have a professional harness builder or tuner do it, or check your work before first power-up. A wiring mistake can damage the ECU, the engine or the car, or start a fire.
| Status | draft · not yet verified: nobody has reported building and running this harness |
|---|---|
| Open errors | 6: read the Findings page before cutting any wire |
| Size of the job | 84 wires · 13 connectors · 5 part lines |
| Tools | Crimp and extraction tools for each terminal family (see Connectors) · wire strippers · multimeter · heat gun + heat-shrink |
| Terminals | 3-1447221-4 |
| Order of work | 1. Check every part against the parts list. 2. Cut and label every wire (labels: Export → Wire labels). 3. Crimp and pin connector by connector, ticking the build checklist. 4. Run the bench test with nothing plugged in and the battery disconnected. 5. Only then connect the ECU and power up. |
Build checklist
Tick each box as you go. Continuity: meter from end to end, expect under 1 Ω.
| Wire | From | To | Gauge | Colour | Cut | Label | Crimp A | Crimp B | Pin A | Pin B | Continuity |
|---|---|---|---|---|---|---|---|---|---|---|---|
| W1 | OEM-A-13 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W3 | OEM-G-10 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W4 | OEM-G-2 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W5 | OEM-G-3 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W6 | OEM-G-9 | SP-14V-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W7 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W8 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W9 | OEM-A-12 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W10 | OEM-A-25 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W11 | OEM-G-7 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W12 | OEM-G-8 | SP-GND-1 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W13 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W14 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W15 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W16 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W17 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W18 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W19 | OEM-A-26 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W20 | OEM-B-13 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W21 | OEM-B-14 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W22 | OEM-B-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W23 | OEM-B-16 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W24 | OEM-B-9 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W25 | OEM-D-11 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W26 | OEM-F-15 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W27 | OEM-F-2 | SP-0V-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W28 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W29 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W30 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W31 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W32 | OEM-D-10 | EMUPRO16-B-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W33 | OEM-F-1 | EMUPRO16-C-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W34 | OEM-F-14 | EMUPRO16-A-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W35 | OEM-B-8 | EMUPRO16-A-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W36 | OEM-D-13 | EMUPRO16-B-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W37 | OEM-D-2 | EMUPRO16-B-17 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W38 | OEM-A-11 | EMUPRO16-A-30 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W39 | OEM-A-24 | EMUPRO16-A-29 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W40 | OEM-B-12 | EMUPRO16-A-28 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W41 | OEM-B-11 | EMUPRO16-A-27 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W42 | OEM-B-10 | EMUPRO16-A-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W43 | OEM-B-2 | EMUPRO16-A-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W44 | OEM-A-1 | EMUPRO16-A-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W45 | OEM-A-2 | EMUPRO16-A-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W46 | OEM-A-3 | EMUPRO16-A-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W47 | OEM-A-14 | EMUPRO16-A-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W48 | OEM-A-15 | EMUPRO16-A-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W49 | OEM-A-16 | EMUPRO16-A-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W50 | OEM-A-5 | EMUPRO16-B-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W51 | OEM-F-19 | EMUPRO16-B-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W52 | OEM-F-20 | EMUPRO16-B-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W53 | OEM-D-9 | EMUPRO16-C-10 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W54 | OEM-F-13 | EMUPRO16-C-31 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W55 | OEM-F-12 | EMUPRO16-C-18 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W56 | OEM-D-12 | EMUPRO16-C-32 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W57 | OEM-D-7 | EMUPRO16-C-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W58 | OEM-F-4 | EMUPRO16-B-4 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W59 | OEM-A-8 | EMUPRO16-B-5 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W60 | OEM-A-10 | EMUPRO16-B-6 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W61 | OEM-A-22 | EMUPRO16-B-7 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W62 | OEM-A-23 | EMUPRO16-B-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W63 | OEM-A-9 | EMUPRO16-A-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W64 | OEM-A-17 | EMUPRO16-C-1 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W65 | OEM-A-20 | EMUPRO16-C-2 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W66 | OEM-A-21 | EMUPRO16-C-3 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W67 | OEM-A-4 | EMUPRO16-D-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W68 | OEM-A-6 | EMUPRO16-D-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W69 | OEM-A-7 | EMUPRO16-D-26 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W70 | OEM-C-8 | EMUPRO16-D-25 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W71 | OEM-D-16 | EMUPRO16-C-33 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W72 | OEM-D-17 | EMUPRO16-C-19 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W73 | OEM-D-18 | EMUPRO16-C-34 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W74 | OEM-D-19 | EMUPRO16-C-12 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W75 | OEM-D-8 | EMUPRO16-D-21 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W76 | OEM-D-20 | EMUPRO16-C-20 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W77 | OEM-C-7 | EMUPRO16-A-13 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W78 | OEM-F-16 | EMUPRO16-A-22 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W79 | OEM-F-6 | EMUPRO16-A-14 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W80 | OEM-B-1 | EMUPRO16-A-24 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W81 | OEM-B-3 | EMUPRO16-A-16 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W82 | OEM-B-4 | EMUPRO16-A-23 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W83 | OEM-C-4 | EMUPRO16-A-15 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | |
| W84 | OEM-C-6 | EMUPRO16-D-11 | 0.5 | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ | ☐ |
Bench test (before first power-up)
Battery disconnected, ECU and every sensor unplugged. Meter on resistance. Each pair below must read open (OL): a reading means a pinched wire, a stray strand or a mis-pinned cavity. Then check continuity of every wire (last column of the build checklist).
| # | Probe A | Probe B | Expect | Why | Reading |
|---|---|---|---|---|---|
| 1 | EMUPRO16-B-14 | EMUPRO16-A-20 | open (OL) | +12 V supply must not touch sensor ground | |
| 2 | EMUPRO16-A-11 | EMUPRO16-A-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 3 | EMUPRO16-A-11 | EMUPRO16-B-12 | open (OL) | power ground must not touch 5 V sensor reference | |
| 4 | EMUPRO16-A-11 | EMUPRO16-B-14 | open (OL) | power ground must not touch +12 V supply | |
| 5 | EMUPRO16-A-11 | EMUPRO16-C-27 | open (OL) | power ground must not touch 5 V sensor reference | |
| 6 | EMUPRO16-A-20 | EMUPRO16-A-12 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 7 | EMUPRO16-A-20 | EMUPRO16-B-12 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 8 | EMUPRO16-A-20 | EMUPRO16-C-27 | open (OL) | sensor ground must not touch 5 V sensor reference | |
| 9 | EMUPRO16-B-14 | EMUPRO16-A-12 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 10 | EMUPRO16-B-14 | EMUPRO16-B-12 | open (OL) | +12 V supply must not touch 5 V sensor reference | |
| 11 | EMUPRO16-B-14 | EMUPRO16-C-27 | open (OL) | +12 V supply must not touch 5 V sensor reference |
If any reading doesn't match, stop and get help before powering up.
Revisions
| Rev | Label | By | Date |
|---|---|---|---|
| No revisions yet. | |||
Schematic
Connectors
EMUPRO16-A
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Ignition 8 | — | — | — | — | — | — | — | — |
| 2 | Injector 1 | — | W44 | — | 0.5 | OEM-A-1 | — | — | — |
| 3 | Injector 2 | — | W45 | — | 0.5 | OEM-A-2 | — | — | — |
| 4 | Injector 3 | — | W46 | — | 0.5 | OEM-A-3 | — | — | — |
| 5 | Injector 4 | — | W47 | — | 0.5 | OEM-A-14 | — | — | — |
| 6 | Injector 5 | — | W48 | — | 0.5 | OEM-A-15 | — | — | — |
| 7 | Injector 6 | — | W49 | — | 0.5 | OEM-A-16 | — | — | — |
| 8 | Injector 7 | — | — | — | — | — | — | — | — |
| 9 | Injector 8 | — | — | — | — | — | — | — | — |
| 10 | Ignition 7 | — | — | — | — | — | — | — | — |
| 11 | Power GND | — | W13 | — | 0.85 | SP-GND-1 | — | — | — |
| 12 | +5V source A | — | W34 | — | 0.5 | OEM-F-14 | — | — | — |
| 13 | Digital 2 | — | W77 | — | 0.5 | OEM-C-7 | — | — | — |
| 14 | Digital 4 | — | W79 | — | 0.5 | OEM-F-6 | — | — | — |
| 15 | Digital 8 | — | W83 | — | 0.5 | OEM-C-4 | — | — | — |
| 16 | Digital 6 (turbo) | — | W81 | — | 0.5 | OEM-B-3 | — | — | — |
| 17 | Power GND | — | W14 | — | 0.85 | SP-GND-1 | — | — | — |
| 18 | Ignition 6 | — | W43 | — | 0.5 | OEM-B-2 | — | — | — |
| 19 | Power GND | — | W15 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | Digital GND | — | W28 | — | 0.5 | SP-0V-1 | — | — | — |
| 21 | Digital 1 (crank) | — | W35 | — | 0.5 | OEM-B-8 | — | — | — |
| 22 | Digital 3 | — | W78 | — | 0.5 | OEM-F-16 | — | — | — |
| 23 | Digital 7 | — | W82 | — | 0.5 | OEM-B-4 | — | — | — |
| 24 | Digital 5 (turbo) | — | W80 | — | 0.5 | OEM-B-1 | — | — | — |
| 25 | Auxiliary 9 | — | W63 | — | 0.5 | OEM-A-9 | — | — | — |
| 26 | Ignition 5 | — | W42 | — | 0.5 | OEM-B-10 | — | — | — |
| 27 | Ignition 4 | — | W41 | — | 0.5 | OEM-B-11 | — | — | — |
| 28 | Ignition 3 | — | W40 | — | 0.5 | OEM-B-12 | — | — | — |
| 29 | Ignition 2 | — | W39 | — | 0.5 | OEM-A-24 | — | — | — |
| 30 | Ignition 1 | — | W38 | — | 0.5 | OEM-A-11 | — | — | — |
| 31 | CAN 1 high (PC comm) | — | — | — | — | — | — | — | — |
| 32 | CAN 1 low (PC comm) | — | — | — | — | — | — | — | — |
| 33 | CAN 2 high | — | — | — | — | — | — | — | — |
| 34 | CAN 2 low | — | — | — | — | — | — | — | — |
EMUPRO16-B
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 1 (WBO heater) | — | W50 | — | 0.5 | OEM-A-5 | — | — | — |
| 2 | Auxiliary 2 (WBO heater) | — | W51 | — | 0.5 | OEM-F-19 | — | — | — |
| 3 | Auxiliary 3 (WBO heater) | — | W52 | — | 0.5 | OEM-F-20 | — | — | — |
| 4 | Auxiliary 4 (WBO heater) | — | W58 | — | 0.5 | OEM-F-4 | — | — | — |
| 5 | Auxiliary 5 | — | W59 | — | 0.5 | OEM-A-8 | — | — | — |
| 6 | Auxiliary 6 | — | W60 | — | 0.5 | OEM-A-10 | — | — | — |
| 7 | Auxiliary 7 | — | W61 | — | 0.5 | OEM-A-22 | — | — | — |
| 8 | +12V supply | — | W8 | — | 0.85 | SP-14V-1 | — | — | — |
| 9 | Digital GND (flash drive) | — | W29 | — | 0.5 | SP-0V-1 | — | — | — |
| 10 | USB D- (flash drive) | — | — | — | — | — | — | — | — |
| 11 | USB D+ (flash drive) | — | — | — | — | — | — | — | — |
| 12 | +5V source A (flash drive) | — | W32 | — | 0.5 | OEM-D-10 | — | — | — |
| 13 | Auxiliary 8 | — | W62 | — | 0.5 | OEM-A-23 | — | — | — |
| 14 | +12V supply | — | W7 | — | 0.85 | SP-14V-1 | — | — | — |
| 15 | +12V switched | — | — | — | — | — | — | — | — |
| 16 | Knock sensor 1 | — | W36 | — | 0.5 | OEM-D-13 | — | — | — |
| 17 | Knock sensor 2 | — | W37 | — | 0.5 | OEM-D-2 | — | — | — |
| 18 | WBO 2 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 19 | Power GND | — | W16 | — | 0.85 | SP-GND-1 | — | — | — |
| 20 | WBO 1 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 21 | WBO 1 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 22 | WBO 1 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
| 23 | WBO 1 VGND (LSU 4.9) | — | — | — | — | — | — | — | — |
| 24 | WBO 2 IP (LSU 4.9) | — | — | — | — | — | — | — | — |
| 25 | WBO 2 VS (LSU 4.9) | — | — | — | — | — | — | — | — |
| 26 | WBO 2 RCAL (LSU 4.9) | — | — | — | — | — | — | — | — |
EMUPRO16-C
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Auxiliary 10 | — | W64 | — | 0.5 | OEM-A-17 | — | — | — |
| 2 | Auxiliary 11 | — | W65 | — | 0.5 | OEM-A-20 | — | — | — |
| 3 | Auxiliary 12 | — | W66 | — | 0.5 | OEM-A-21 | — | — | — |
| 4 | Analog 7 | — | — | — | — | — | — | — | — |
| 5 | Analog 10 (2k2 pull) | — | — | — | — | — | — | — | — |
| 6 | H-bridge 1A | — | — | — | — | — | — | — | — |
| 7 | H-bridge 2B | — | — | — | — | — | — | — | — |
| 8 | H-bridge 3A | — | — | — | — | — | — | — | — |
| 9 | H-bridge 2A | — | — | — | — | — | — | — | — |
| 10 | Analog 1 (MAP) | — | W53 | — | 0.5 | OEM-D-9 | — | — | — |
| 11 | Analog 3 | — | W57 | — | 0.5 | OEM-D-7 | — | — | — |
| 12 | Analog 5 | — | W74 | — | 0.5 | OEM-D-19 | — | — | — |
| 13 | Analog 8 | — | — | — | — | — | — | — | — |
| 14 | Analog 11 (2k2 pull) | — | — | — | — | — | — | — | — |
| 15 | Analog 13 (1k pull) | — | — | — | — | — | — | — | — |
| 16 | Analog 15 (330R pull) | — | — | — | — | — | — | — | — |
| 17 | H-bridge 3B | — | — | — | — | — | — | — | — |
| 18 | Analog 2 | — | W55 | — | 0.5 | OEM-F-12 | — | — | — |
| 19 | Analog 4 | — | W72 | — | 0.5 | OEM-D-17 | — | — | — |
| 20 | Analog 6 | — | W76 | — | 0.5 | OEM-D-20 | — | — | — |
| 21 | Analog 9 (2k2 pull) | — | — | — | — | — | — | — | — |
| 22 | Analog 12 (2k2 pull) | — | — | — | — | — | — | — | — |
| 23 | Analog 14 (1k pull) | — | — | — | — | — | — | — | — |
| 24 | Analog 16 (100R pull) | — | — | — | — | — | — | — | — |
| 25 | H-bridge 1B | — | — | — | — | — | — | — | — |
| 26 | LIN | — | — | — | — | — | — | — | — |
| 27 | +5V source B | — | W33 | — | 0.5 | OEM-F-1 | — | — | — |
| 28 | +5V source B | — | — | — | — | — | — | — | — |
| 29 | Analog GND | — | W30 | — | 0.5 | SP-0V-1 | — | — | — |
| 30 | Power GND | — | W17 | — | 0.85 | SP-GND-1 | — | — | — |
| 31 | Precision analog 1 | — | W54 | — | 0.5 | OEM-F-13 | — | — | — |
| 32 | Precision analog 2 | — | W56 | — | 0.5 | OEM-D-12 | — | — | — |
| 33 | Precision analog 3 | — | W71 | — | 0.5 | OEM-D-16 | — | — | — |
| 34 | Precision analog 4 | — | W73 | — | 0.5 | OEM-D-18 | — | — | — |
EMUPRO16-D
Mating face
Wire side
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 10 | — | — | — | — | — | — | — | — |
| 2 | Injector 11 | — | — | — | — | — | — | — | — |
| 3 | Injector 12 | — | — | — | — | — | — | — | — |
| 4 | Injector 13 | — | — | — | — | — | — | — | — |
| 5 | Injector 14 | — | — | — | — | — | — | — | — |
| 6 | Injector 15 | — | — | — | — | — | — | — | — |
| 7 | Injector 16 | — | — | — | — | — | — | — | — |
| 8 | Injector 9 | — | — | — | — | — | — | — | — |
| 9 | Analog 17 | — | — | — | — | — | — | — | — |
| 10 | Analog 18 | — | — | — | — | — | — | — | — |
| 11 | Digital 9 / Analog 19 | — | W84 | — | 0.5 | OEM-C-6 | — | — | — |
| 12 | Digital 10 / Analog 20 | — | — | — | — | — | — | — | — |
| 13 | Auxiliary 13 | — | W67 | — | 0.5 | OEM-A-4 | — | — | — |
| 14 | H-bridge 4A | — | — | — | — | — | — | — | — |
| 15 | Precision analog 6 | — | — | — | — | — | — | — | — |
| 16 | Precision analog 8 | — | — | — | — | — | — | — | — |
| 17 | Analog GND | — | W31 | — | 0.5 | SP-0V-1 | — | — | — |
| 18 | Power GND | — | W18 | — | 0.85 | SP-GND-1 | — | — | — |
| 19 | Auxiliary 14 | — | W68 | — | 0.5 | OEM-A-6 | — | — | — |
| 20 | H-bridge 4B | — | — | — | — | — | — | — | — |
| 21 | Precision analog 5 | — | W75 | — | 0.5 | OEM-D-8 | — | — | — |
| 22 | Precision analog 7 | — | — | — | — | — | — | — | — |
| 23 | Ignition 9 | — | — | — | — | — | — | — | — |
| 24 | Ignition 10 | — | — | — | — | — | — | — | — |
| 25 | Auxiliary 16 | — | W70 | — | 0.5 | OEM-C-8 | — | — | — |
| 26 | Auxiliary 15 | — | W69 | — | 0.5 | OEM-A-7 | — | — | — |
OEM-A
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Injector 1 (INJ1) | — | W44 | — | 0.5 | EMUPRO16-A-2 | — | — | — |
| 10 | Rear secondary O2 heater (RSO2SHTC) | — | W60 | — | 0.5 | EMUPRO16-B-6 | — | — | — |
| 11 | Ignition coil 1 (IGN COIL1) | — | W38 | — | 0.5 | EMUPRO16-A-30 | — | — | — |
| 12 | Power ground (PG1) | — | W9 | — | 0.85 | SP-GND-1 | — | — | — |
| 13 | ECM power source (IGP1) | — | W1 | — | 0.85 | SP-14V-1 | — | — | — |
| 14 | Injector 4 (INJ4) | — | W47 | — | 0.5 | EMUPRO16-A-5 | — | — | — |
| 15 | Injector 5 (INJ5) | — | W48 | — | 0.5 | EMUPRO16-A-6 | — | — | — |
| 16 | Injector 6 (INJ6) | — | W49 | — | 0.5 | EMUPRO16-A-7 | — | — | — |
| 17 | EVAP bypass solenoid (2WBS) | — | W64 | — | 0.5 | EMUPRO16-C-1 | — | — | — |
| 2 | Injector 2 (INJ2) | — | W45 | — | 0.5 | EMUPRO16-A-3 | — | — | — |
| 20 | IAB control solenoid (IABCS) | — | W65 | — | 0.5 | EMUPRO16-C-2 | — | — | — |
| 21 | EVAP purge control solenoid (PCS) | — | W66 | — | 0.5 | EMUPRO16-C-3 | — | — | — |
| 22 | Front primary O2 heater (FPO2SHTC) | — | W61 | — | 0.5 | EMUPRO16-B-7 | — | — | — |
| 23 | Rear primary O2 heater (RPO2SHTC) | — | W62 | — | 0.5 | EMUPRO16-B-13 | — | — | — |
| 24 | Ignition coil 2 (IGN COIL2) | — | W39 | — | 0.5 | EMUPRO16-A-29 | — | — | — |
| 25 | Power ground (PG2) | — | W10 | — | 0.85 | SP-GND-1 | — | — | — |
| 26 | Logic ground (LG1) | — | W19 | — | 0.5 | SP-0V-1 | — | — | — |
| 3 | Injector 3 (INJ3) | — | W46 | — | 0.5 | EMUPRO16-A-4 | — | — | — |
| 4 | EVAP canister vent shut valve (VSV) | — | W67 | — | 0.5 | EMUPRO16-D-13 | — | — | — |
| 5 | Fuel pump relay (FLR1) | — | W50 | — | 0.5 | EMUPRO16-B-1 | — | — | — |
| 6 | EGR control solenoid (ESOL) | — | W68 | — | 0.5 | EMUPRO16-D-19 | — | — | — |
| 7 | Malfunction indicator lamp (MIL) | — | W69 | — | 0.5 | EMUPRO16-D-26 | — | — | — |
| 8 | A/C clutch relay (ACC) | — | W59 | — | 0.5 | EMUPRO16-B-5 | — | — | — |
| 9 | Front secondary O2 heater (FSO2SHTC) | — | W63 | — | 0.5 | EMUPRO16-A-25 | — | — | — |
OEM-B
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | VTEC pressure switch front (VTP SWF) | — | W80 | — | 0.5 | EMUPRO16-A-24 | — | — | — |
| 10 | Ignition coil 5 (IGN COIL5) | — | W42 | — | 0.5 | EMUPRO16-A-26 | — | — | — |
| 11 | Ignition coil 4 (IGN COIL4) | — | W41 | — | 0.5 | EMUPRO16-A-27 | — | — | — |
| 12 | Ignition coil 3 (IGN COIL3) | — | W40 | — | 0.5 | EMUPRO16-A-28 | — | — | — |
| 13 | Cylinder position sensor 2 return (CYP 2M) | — | W20 | — | 0.5 | SP-0V-1 | — | — | — |
| 14 | Cylinder position sensor 1 return (CYP 1M) | — | W21 | — | 0.5 | SP-0V-1 | — | — | — |
| 15 | Crank position sensor 2 return (CKP 2M) | — | W22 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Crank position sensor 1 return (CKP 1M) | — | W23 | — | 0.5 | SP-0V-1 | — | — | — |
| 2 | Ignition coil 6 (IGN COIL6) | — | W43 | — | 0.5 | EMUPRO16-A-18 | — | — | — |
| 3 | VTEC pressure switch rear (VTP SWR) | — | W81 | — | 0.5 | EMUPRO16-A-16 | — | — | — |
| 4 | Neutral switch (NT SW, M/T) | — | W82 | — | 0.5 | EMUPRO16-A-23 | — | — | — |
| 5 | Cylinder position sensor 2 + (CYP 2P) | — | — | — | — | — | — | — | — |
| 6 | Cylinder position sensor 1 + (CYP 1P) | — | — | — | — | — | — | — | — |
| 7 | Crank position sensor 2 + (CKP 2P) | — | — | — | — | — | — | — | — |
| 8 | Crank position sensor 1 + (CKP 1P) | — | W35 | — | 0.5 | EMUPRO16-A-21 | — | — | — |
| 9 | Logic ground (LG2) | — | W24 | — | 0.5 | SP-0V-1 | — | — | — |
OEM-C
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | ECM power source (IGP2) | — | W2 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Clutch switch (MTCLS, M/T) | — | W83 | — | 0.5 | EMUPRO16-A-15 | — | — | — |
| 6 | Starter switch (STS) | — | W84 | — | 0.5 | EMUPRO16-D-11 | — | — | — |
| 7 | Vehicle speed sensor (VSS) | — | W77 | — | 0.5 | EMUPRO16-A-13 | — | — | — |
| 8 | Engine speed pulse (NEP) | — | W70 | — | 0.5 | EMUPRO16-D-25 | — | — | — |
OEM-D
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Backup power (VBU) | — | — | — | — | — | — | — | — |
| 10 | Sensor 5V supply (VCC2) | — | W32 | — | 0.5 | EMUPRO16-B-12 | — | — | — |
| 11 | Sensor ground (SG2) | — | W25 | — | 0.5 | SP-0V-1 | — | — | — |
| 12 | Throttle position sensor (TPS) | — | W56 | — | 0.5 | EMUPRO16-C-32 | — | — | — |
| 13 | Knock sensor front (KSF) | — | W36 | — | 0.5 | EMUPRO16-B-16 | — | — | — |
| 16 | Front secondary O2 signal (O2S FS) | — | W71 | — | 0.5 | EMUPRO16-C-33 | — | — | — |
| 17 | Rear secondary O2 signal (O2S RS) | — | W72 | — | 0.5 | EMUPRO16-C-19 | — | — | — |
| 18 | Front primary O2 signal (O2S FP) | — | W73 | — | 0.5 | EMUPRO16-C-34 | — | — | — |
| 19 | Rear primary O2 signal (O2S RP) | — | W74 | — | 0.5 | EMUPRO16-C-12 | — | — | — |
| 2 | Knock sensor rear (KSR) | — | W37 | — | 0.5 | EMUPRO16-B-17 | — | — | — |
| 20 | EGR valve lift sensor (EGRL) | — | W76 | — | 0.5 | EMUPRO16-C-20 | — | — | — |
| 4 | K-line diagnostics | — | — | — | — | — | — | — | — |
| 7 | Engine coolant temperature (ECT) | — | W57 | — | 0.5 | EMUPRO16-C-11 | — | — | — |
| 8 | Intake air temperature (IAT) | — | W75 | — | 0.5 | EMUPRO16-D-21 | — | — | — |
| 9 | MAP sensor | — | W53 | — | 0.5 | EMUPRO16-C-10 | — | — | — |
OEM-F
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Sensor 5V supply (VCC1) | — | W33 | — | 0.5 | EMUPRO16-C-27 | — | — | — |
| 12 | Accelerator pedal position 2 (AP2) | — | W55 | — | 0.5 | EMUPRO16-C-18 | — | — | — |
| 13 | Accelerator pedal position 1 (AP1) | — | W54 | — | 0.5 | EMUPRO16-C-31 | — | — | — |
| 14 | Accelerator pedal 5V supply (VCC3) | — | W34 | — | 0.5 | EMUPRO16-A-12 | — | — | — |
| 15 | Accelerator pedal ground (SG3) | — | W26 | — | 0.5 | SP-0V-1 | — | — | — |
| 16 | Brake switch 1 (BKSW1) | — | W78 | — | 0.5 | EMUPRO16-A-22 | — | — | — |
| 19 | VTEC solenoid front (VT SOLF) | — | W51 | — | 0.5 | EMUPRO16-B-2 | — | — | — |
| 2 | Sensor ground (SG1) | — | W27 | — | 0.5 | SP-0V-1 | — | — | — |
| 20 | VTEC solenoid rear (VT SOLR) | — | W52 | — | 0.5 | EMUPRO16-B-3 | — | — | — |
| 4 | Fuel pump relay 2 (FLR2) | — | W58 | — | 0.5 | EMUPRO16-B-4 | — | — | — |
| 6 | Brake switch 2 (BKSW2) | — | W79 | — | 0.5 | EMUPRO16-A-14 | — | — | — |
OEM-G
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 10 | Throttle motor common power phases 2&4 (COM2) | — | W3 | — | 0.85 | SP-14V-1 | — | — | — |
| 11 | Throttle motor phase 3 (PM3) | — | — | — | — | — | — | — | — |
| 12 | Throttle motor phase 4 (PM4) | — | — | — | — | — | — | — | — |
| 2 | Throttle motor power source 1 (IGM1) | — | W4 | — | 0.85 | SP-14V-1 | — | — | — |
| 3 | Throttle motor power source 2 (IGM2) | — | W5 | — | 0.85 | SP-14V-1 | — | — | — |
| 4 | Throttle motor phase 1 (PM1) | — | — | — | — | — | — | — | — |
| 5 | Throttle motor phase 2 (PM2) | — | — | — | — | — | — | — | — |
| 7 | Throttle motor ground 1 (PGM1) | — | W11 | — | 0.85 | SP-GND-1 | — | — | — |
| 8 | Throttle motor ground 2 (PGM2) | — | W12 | — | 0.85 | SP-GND-1 | — | — | — |
| 9 | Throttle motor common power phases 1&3 (COM1) | — | W6 | — | 0.85 | SP-14V-1 | — | — | — |
SP-0V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W19 | — | 0.5 | OEM-A-26 | — | — | — |
| 1 | — | — | W20 | — | 0.5 | OEM-B-13 | — | — | — |
| 1 | — | — | W21 | — | 0.5 | OEM-B-14 | — | — | — |
| 1 | — | — | W22 | — | 0.5 | OEM-B-15 | — | — | — |
| 1 | — | — | W23 | — | 0.5 | OEM-B-16 | — | — | — |
| 1 | — | — | W24 | — | 0.5 | OEM-B-9 | — | — | — |
| 1 | — | — | W25 | — | 0.5 | OEM-D-11 | — | — | — |
| 1 | — | — | W26 | — | 0.5 | OEM-F-15 | — | — | — |
| 1 | — | — | W27 | — | 0.5 | OEM-F-2 | — | — | — |
| 1 | — | — | W28 | — | 0.5 | EMUPRO16-A-20 | — | — | — |
| 1 | — | — | W29 | — | 0.5 | EMUPRO16-B-9 | — | — | — |
| 1 | — | — | W30 | — | 0.5 | EMUPRO16-C-29 | — | — | — |
| 1 | — | — | W31 | — | 0.5 | EMUPRO16-D-17 | — | — | — |
SP-14V
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W1 | — | 0.85 | OEM-A-13 | — | — | — |
| 1 | — | — | W2 | — | 0.85 | OEM-C-1 | — | — | — |
| 1 | — | — | W3 | — | 0.85 | OEM-G-10 | — | — | — |
| 1 | — | — | W4 | — | 0.85 | OEM-G-2 | — | — | — |
| 1 | — | — | W5 | — | 0.85 | OEM-G-3 | — | — | — |
| 1 | — | — | W6 | — | 0.85 | OEM-G-9 | — | — | — |
| 1 | — | — | W7 | — | 0.85 | EMUPRO16-B-14 | — | — | — |
| 1 | — | — | W8 | — | 0.85 | EMUPRO16-B-8 | — | — | — |
SP-GND
| Cavity | Function | Signal | Wire | Colour | Gauge (mm²) | Destination | Terminal | Seal | Plug |
|---|---|---|---|---|---|---|---|---|---|
| 1 | — | — | W9 | — | 0.85 | OEM-A-12 | — | — | — |
| 1 | — | — | W10 | — | 0.85 | OEM-A-25 | — | — | — |
| 1 | — | — | W11 | — | 0.85 | OEM-G-7 | — | — | — |
| 1 | — | — | W12 | — | 0.85 | OEM-G-8 | — | — | — |
| 1 | — | — | W13 | — | 0.85 | EMUPRO16-A-11 | — | — | — |
| 1 | — | — | W14 | — | 0.85 | EMUPRO16-A-17 | — | — | — |
| 1 | — | — | W15 | — | 0.85 | EMUPRO16-A-19 | — | — | — |
| 1 | — | — | W16 | — | 0.85 | EMUPRO16-B-19 | — | — | — |
| 1 | — | — | W17 | — | 0.85 | EMUPRO16-C-30 | — | — | — |
| 1 | — | — | W18 | — | 0.85 | EMUPRO16-D-18 | — | — | — |
Pin map
| OEM point | OEM function | OEM family | Target point | Target function | Target family | Wire colour | Evidence |
|---|---|---|---|---|---|---|---|
| OEM-A-1 | Injector 1 (INJ1) | injector_out | EMUPRO16-A-2 | Injector 1 | injector_out | single_source | |
| OEM-A-10 | Rear secondary O2 heater (RSO2SHTC) | low_side_out | EMUPRO16-B-6 | Auxiliary 6 | low_side_out | single_source | |
| OEM-A-11 | Ignition coil 1 (IGN COIL1) | ignition_out | EMUPRO16-A-30 | Ignition 1 | ignition_out | single_source | |
| OEM-A-12 | Power ground (PG1) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A-13 | ECM power source (IGP1) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-A-14 | Injector 4 (INJ4) | injector_out | EMUPRO16-A-5 | Injector 4 | injector_out | single_source | |
| OEM-A-15 | Injector 5 (INJ5) | injector_out | EMUPRO16-A-6 | Injector 5 | injector_out | single_source | |
| OEM-A-16 | Injector 6 (INJ6) | injector_out | EMUPRO16-A-7 | Injector 6 | injector_out | single_source | |
| OEM-A-17 | EVAP bypass solenoid (2WBS) | low_side_out | EMUPRO16-C-1 | Auxiliary 10 | low_side_out | single_source | |
| OEM-A-2 | Injector 2 (INJ2) | injector_out | EMUPRO16-A-3 | Injector 2 | injector_out | single_source | |
| OEM-A-20 | IAB control solenoid (IABCS) | low_side_out | EMUPRO16-C-2 | Auxiliary 11 | low_side_out | single_source | |
| OEM-A-21 | EVAP purge control solenoid (PCS) | low_side_out | EMUPRO16-C-3 | Auxiliary 12 | low_side_out | single_source | |
| OEM-A-22 | Front primary O2 heater (FPO2SHTC) | low_side_out | EMUPRO16-B-7 | Auxiliary 7 | low_side_out | single_source | |
| OEM-A-23 | Rear primary O2 heater (RPO2SHTC) | low_side_out | EMUPRO16-B-13 | Auxiliary 8 | low_side_out | single_source | |
| OEM-A-24 | Ignition coil 2 (IGN COIL2) | ignition_out | EMUPRO16-A-29 | Ignition 2 | ignition_out | single_source | |
| OEM-A-25 | Power ground (PG2) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-A-26 | Logic ground (LG1) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-A-3 | Injector 3 (INJ3) | injector_out | EMUPRO16-A-4 | Injector 3 | injector_out | single_source | |
| OEM-A-4 | EVAP canister vent shut valve (VSV) | low_side_out | EMUPRO16-D-13 | Auxiliary 13 | low_side_out | single_source | |
| OEM-A-5 | Fuel pump relay (FLR1) | low_side_out | EMUPRO16-B-1 | Auxiliary 1 (WBO heater) | low_side_out | single_source | |
| OEM-A-6 | EGR control solenoid (ESOL) | low_side_out | EMUPRO16-D-19 | Auxiliary 14 | low_side_out | single_source | |
| OEM-A-7 | Malfunction indicator lamp (MIL) | low_side_out | EMUPRO16-D-26 | Auxiliary 15 | low_side_out | single_source | |
| OEM-A-8 | A/C clutch relay (ACC) | low_side_out | EMUPRO16-B-5 | Auxiliary 5 | low_side_out | single_source | |
| OEM-A-9 | Front secondary O2 heater (FSO2SHTC) | low_side_out | EMUPRO16-A-25 | Auxiliary 9 | low_side_out | single_source | |
| OEM-B-1 | VTEC pressure switch front (VTP SWF) | digital_in | EMUPRO16-A-24 | Digital 5 (turbo) | digital_in | single_source | |
| OEM-B-10 | Ignition coil 5 (IGN COIL5) | ignition_out | EMUPRO16-A-26 | Ignition 5 | ignition_out | single_source | |
| OEM-B-11 | Ignition coil 4 (IGN COIL4) | ignition_out | EMUPRO16-A-27 | Ignition 4 | ignition_out | single_source | |
| OEM-B-12 | Ignition coil 3 (IGN COIL3) | ignition_out | EMUPRO16-A-28 | Ignition 3 | ignition_out | single_source | |
| OEM-B-13 | Cylinder position sensor 2 return (CYP 2M) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-14 | Cylinder position sensor 1 return (CYP 1M) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-15 | Crank position sensor 2 return (CKP 2M) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-16 | Crank position sensor 1 return (CKP 1M) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-B-2 | Ignition coil 6 (IGN COIL6) | ignition_out | EMUPRO16-A-18 | Ignition 6 | ignition_out | single_source | |
| OEM-B-3 | VTEC pressure switch rear (VTP SWR) | digital_in | EMUPRO16-A-16 | Digital 6 (turbo) | digital_in | single_source | |
| OEM-B-4 | Neutral switch (NT SW, M/T) | digital_in | EMUPRO16-A-23 | Digital 7 | digital_in | single_source | |
| OEM-B-5 | Cylinder position sensor 2 + (CYP 2P) | trigger_in | — | — | — | single_source | |
| OEM-B-6 | Cylinder position sensor 1 + (CYP 1P) | trigger_in | — | — | — | single_source | |
| OEM-B-7 | Crank position sensor 2 + (CKP 2P) | trigger_in | — | — | — | single_source | |
| OEM-B-8 | Crank position sensor 1 + (CKP 1P) | trigger_in | EMUPRO16-A-21 | Digital 1 (crank) | trigger_in | single_source | |
| OEM-B-9 | Logic ground (LG2) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-C-1 | ECM power source (IGP2) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-C-4 | Clutch switch (MTCLS, M/T) | digital_in | EMUPRO16-A-15 | Digital 8 | digital_in | single_source | |
| OEM-C-6 | Starter switch (STS) | digital_in | EMUPRO16-D-11 | Digital 9 / Analog 19 | digital_in | single_source | |
| OEM-C-7 | Vehicle speed sensor (VSS) | digital_in | EMUPRO16-A-13 | Digital 2 | digital_in | single_source | |
| OEM-C-8 | Engine speed pulse (NEP) | tacho_out | EMUPRO16-D-25 | Auxiliary 16 | low_side_out | single_source | |
| OEM-D-1 | Backup power (VBU) | power_in | — | — | — | single_source | |
| OEM-D-10 | Sensor 5V supply (VCC2) | vref | EMUPRO16-B-12 | +5V source A (flash drive) | vref | single_source | |
| OEM-D-11 | Sensor ground (SG2) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-D-12 | Throttle position sensor (TPS) | analog_in | EMUPRO16-C-32 | Precision analog 2 | analog_in | single_source | |
| OEM-D-13 | Knock sensor front (KSF) | knock_in | EMUPRO16-B-16 | Knock sensor 1 | knock_in | single_source | |
| OEM-D-16 | Front secondary O2 signal (O2S FS) | lambda_nb_in | EMUPRO16-C-33 | Precision analog 3 | analog_in | single_source | |
| OEM-D-17 | Rear secondary O2 signal (O2S RS) | lambda_nb_in | EMUPRO16-C-19 | Analog 4 | analog_in | single_source | |
| OEM-D-18 | Front primary O2 signal (O2S FP) | lambda_nb_in | EMUPRO16-C-34 | Precision analog 4 | analog_in | single_source | |
| OEM-D-19 | Rear primary O2 signal (O2S RP) | lambda_nb_in | EMUPRO16-C-12 | Analog 5 | analog_in | single_source | |
| OEM-D-2 | Knock sensor rear (KSR) | knock_in | EMUPRO16-B-17 | Knock sensor 2 | knock_in | single_source | |
| OEM-D-20 | EGR valve lift sensor (EGRL) | analog_in | EMUPRO16-C-20 | Analog 6 | analog_in | single_source | |
| OEM-D-4 | K-line diagnostics | serial | — | — | — | single_source | |
| OEM-D-7 | Engine coolant temperature (ECT) | temp_in | EMUPRO16-C-11 | Analog 3 | analog_in | single_source | |
| OEM-D-8 | Intake air temperature (IAT) | temp_in | EMUPRO16-D-21 | Precision analog 5 | analog_in | single_source | |
| OEM-D-9 | MAP sensor | analog_in | EMUPRO16-C-10 | Analog 1 (MAP) | analog_in | single_source | |
| OEM-F-1 | Sensor 5V supply (VCC1) | vref | EMUPRO16-C-27 | +5V source B | vref | single_source | |
| OEM-F-12 | Accelerator pedal position 2 (AP2) | analog_in | EMUPRO16-C-18 | Analog 2 | analog_in | single_source | |
| OEM-F-13 | Accelerator pedal position 1 (AP1) | analog_in | EMUPRO16-C-31 | Precision analog 1 | analog_in | single_source | |
| OEM-F-14 | Accelerator pedal 5V supply (VCC3) | vref | EMUPRO16-A-12 | +5V source A | vref | single_source | |
| OEM-F-15 | Accelerator pedal ground (SG3) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-F-16 | Brake switch 1 (BKSW1) | digital_in | EMUPRO16-A-22 | Digital 3 | digital_in | single_source | |
| OEM-F-19 | VTEC solenoid front (VT SOLF) | low_side_out | EMUPRO16-B-2 | Auxiliary 2 (WBO heater) | low_side_out | single_source | |
| OEM-F-2 | Sensor ground (SG1) | sensor_ground | EMUPRO16-A-20 + EMUPRO16-B-9 + EMUPRO16-C-29 + EMUPRO16-D-17 | Digital GND + Digital GND (flash drive) + Analog GND + Analog GND | sensor_ground | single_source | |
| OEM-F-20 | VTEC solenoid rear (VT SOLR) | low_side_out | EMUPRO16-B-3 | Auxiliary 3 (WBO heater) | low_side_out | single_source | |
| OEM-F-4 | Fuel pump relay 2 (FLR2) | low_side_out | EMUPRO16-B-4 | Auxiliary 4 (WBO heater) | low_side_out | single_source | |
| OEM-F-6 | Brake switch 2 (BKSW2) | digital_in | EMUPRO16-A-14 | Digital 4 | digital_in | single_source | |
| OEM-G-10 | Throttle motor common power phases 2&4 (COM2) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-G-11 | Throttle motor phase 3 (PM3) | hbridge_out | — | — | — | single_source | |
| OEM-G-12 | Throttle motor phase 4 (PM4) | hbridge_out | — | — | — | single_source | |
| OEM-G-2 | Throttle motor power source 1 (IGM1) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-G-3 | Throttle motor power source 2 (IGM2) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source | |
| OEM-G-4 | Throttle motor phase 1 (PM1) | hbridge_out | — | — | — | single_source | |
| OEM-G-5 | Throttle motor phase 2 (PM2) | hbridge_out | — | — | — | single_source | |
| OEM-G-7 | Throttle motor ground 1 (PGM1) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-G-8 | Throttle motor ground 2 (PGM2) | ground | EMUPRO16-A-11 + EMUPRO16-A-17 + EMUPRO16-A-19 + EMUPRO16-B-19 + EMUPRO16-C-30 + EMUPRO16-D-18 | Power GND + Power GND + Power GND + Power GND + Power GND + Power GND | ground | single_source | |
| OEM-G-9 | Throttle motor common power phases 1&3 (COM1) | power_in | EMUPRO16-B-14 + EMUPRO16-B-8 | +12V supply + +12V supply | power_in | single_source |
Cut list
| Wire | From | To | Gauge (mm²) | Colour | Length | Signal | Ident |
|---|---|---|---|---|---|---|---|
| W1 | OEM-A-13 | SP-14V-1 | 0.85 | no route | ECM power source (IGP1) | — | |
| W2 | OEM-C-1 | SP-14V-1 | 0.85 | no route | ECM power source (IGP2) | — | |
| W3 | OEM-G-10 | SP-14V-1 | 0.85 | no route | Throttle motor common power phases 2&4 (COM2) | — | |
| W4 | OEM-G-2 | SP-14V-1 | 0.85 | no route | Throttle motor power source 1 (IGM1) | — | |
| W5 | OEM-G-3 | SP-14V-1 | 0.85 | no route | Throttle motor power source 2 (IGM2) | — | |
| W6 | OEM-G-9 | SP-14V-1 | 0.85 | no route | Throttle motor common power phases 1&3 (COM1) | — | |
| W7 | SP-14V-1 | EMUPRO16-B-14 | 0.85 | no route | +12V supply | — | |
| W8 | SP-14V-1 | EMUPRO16-B-8 | 0.85 | no route | +12V supply | — | |
| W9 | OEM-A-12 | SP-GND-1 | 0.85 | no route | Power ground (PG1) | — | |
| W10 | OEM-A-25 | SP-GND-1 | 0.85 | no route | Power ground (PG2) | — | |
| W11 | OEM-G-7 | SP-GND-1 | 0.85 | no route | Throttle motor ground 1 (PGM1) | — | |
| W12 | OEM-G-8 | SP-GND-1 | 0.85 | no route | Throttle motor ground 2 (PGM2) | — | |
| W13 | SP-GND-1 | EMUPRO16-A-11 | 0.85 | no route | Power GND | — | |
| W14 | SP-GND-1 | EMUPRO16-A-17 | 0.85 | no route | Power GND | — | |
| W15 | SP-GND-1 | EMUPRO16-A-19 | 0.85 | no route | Power GND | — | |
| W16 | SP-GND-1 | EMUPRO16-B-19 | 0.85 | no route | Power GND | — | |
| W17 | SP-GND-1 | EMUPRO16-C-30 | 0.85 | no route | Power GND | — | |
| W18 | SP-GND-1 | EMUPRO16-D-18 | 0.85 | no route | Power GND | — | |
| W19 | OEM-A-26 | SP-0V-1 | 0.5 | no route | Logic ground (LG1) | — | |
| W20 | OEM-B-13 | SP-0V-1 | 0.5 | no route | Cylinder position sensor 2 return (CYP 2M) | — | |
| W21 | OEM-B-14 | SP-0V-1 | 0.5 | no route | Cylinder position sensor 1 return (CYP 1M) | — | |
| W22 | OEM-B-15 | SP-0V-1 | 0.5 | no route | Crank position sensor 2 return (CKP 2M) | — | |
| W23 | OEM-B-16 | SP-0V-1 | 0.5 | no route | Crank position sensor 1 return (CKP 1M) | — | |
| W24 | OEM-B-9 | SP-0V-1 | 0.5 | no route | Logic ground (LG2) | — | |
| W25 | OEM-D-11 | SP-0V-1 | 0.5 | no route | Sensor ground (SG2) | — | |
| W26 | OEM-F-15 | SP-0V-1 | 0.5 | no route | Accelerator pedal ground (SG3) | — | |
| W27 | OEM-F-2 | SP-0V-1 | 0.5 | no route | Sensor ground (SG1) | — | |
| W28 | SP-0V-1 | EMUPRO16-A-20 | 0.5 | no route | Digital GND | — | |
| W29 | SP-0V-1 | EMUPRO16-B-9 | 0.5 | no route | Digital GND (flash drive) | — | |
| W30 | SP-0V-1 | EMUPRO16-C-29 | 0.5 | no route | Analog GND | — | |
| W31 | SP-0V-1 | EMUPRO16-D-17 | 0.5 | no route | Analog GND | — | |
| W32 | OEM-D-10 | EMUPRO16-B-12 | 0.5 | no route | Sensor 5V supply (VCC2) | — | |
| W33 | OEM-F-1 | EMUPRO16-C-27 | 0.5 | no route | Sensor 5V supply (VCC1) | — | |
| W34 | OEM-F-14 | EMUPRO16-A-12 | 0.5 | no route | Accelerator pedal 5V supply (VCC3) | — | |
| W35 | OEM-B-8 | EMUPRO16-A-21 | 0.5 | no route | Crank position sensor 1 + (CKP 1P) | — | |
| W36 | OEM-D-13 | EMUPRO16-B-16 | 0.5 | no route | Knock sensor front (KSF) | — | |
| W37 | OEM-D-2 | EMUPRO16-B-17 | 0.5 | no route | Knock sensor rear (KSR) | — | |
| W38 | OEM-A-11 | EMUPRO16-A-30 | 0.5 | no route | Ignition coil 1 (IGN COIL1) | — | |
| W39 | OEM-A-24 | EMUPRO16-A-29 | 0.5 | no route | Ignition coil 2 (IGN COIL2) | — | |
| W40 | OEM-B-12 | EMUPRO16-A-28 | 0.5 | no route | Ignition coil 3 (IGN COIL3) | — | |
| W41 | OEM-B-11 | EMUPRO16-A-27 | 0.5 | no route | Ignition coil 4 (IGN COIL4) | — | |
| W42 | OEM-B-10 | EMUPRO16-A-26 | 0.5 | no route | Ignition coil 5 (IGN COIL5) | — | |
| W43 | OEM-B-2 | EMUPRO16-A-18 | 0.5 | no route | Ignition coil 6 (IGN COIL6) | — | |
| W44 | OEM-A-1 | EMUPRO16-A-2 | 0.5 | no route | Injector 1 (INJ1) | — | |
| W45 | OEM-A-2 | EMUPRO16-A-3 | 0.5 | no route | Injector 2 (INJ2) | — | |
| W46 | OEM-A-3 | EMUPRO16-A-4 | 0.5 | no route | Injector 3 (INJ3) | — | |
| W47 | OEM-A-14 | EMUPRO16-A-5 | 0.5 | no route | Injector 4 (INJ4) | — | |
| W48 | OEM-A-15 | EMUPRO16-A-6 | 0.5 | no route | Injector 5 (INJ5) | — | |
| W49 | OEM-A-16 | EMUPRO16-A-7 | 0.5 | no route | Injector 6 (INJ6) | — | |
| W50 | OEM-A-5 | EMUPRO16-B-1 | 0.5 | no route | Fuel pump relay (FLR1) | — | |
| W51 | OEM-F-19 | EMUPRO16-B-2 | 0.5 | no route | VTEC solenoid front (VT SOLF) | — | |
| W52 | OEM-F-20 | EMUPRO16-B-3 | 0.5 | no route | VTEC solenoid rear (VT SOLR) | — | |
| W53 | OEM-D-9 | EMUPRO16-C-10 | 0.5 | no route | MAP sensor | — | |
| W54 | OEM-F-13 | EMUPRO16-C-31 | 0.5 | no route | Accelerator pedal position 1 (AP1) | — | |
| W55 | OEM-F-12 | EMUPRO16-C-18 | 0.5 | no route | Accelerator pedal position 2 (AP2) | — | |
| W56 | OEM-D-12 | EMUPRO16-C-32 | 0.5 | no route | Throttle position sensor (TPS) | — | |
| W57 | OEM-D-7 | EMUPRO16-C-11 | 0.5 | no route | Engine coolant temperature (ECT) | — | |
| W58 | OEM-F-4 | EMUPRO16-B-4 | 0.5 | no route | Fuel pump relay 2 (FLR2) | — | |
| W59 | OEM-A-8 | EMUPRO16-B-5 | 0.5 | no route | A/C clutch relay (ACC) | — | |
| W60 | OEM-A-10 | EMUPRO16-B-6 | 0.5 | no route | Rear secondary O2 heater (RSO2SHTC) | — | |
| W61 | OEM-A-22 | EMUPRO16-B-7 | 0.5 | no route | Front primary O2 heater (FPO2SHTC) | — | |
| W62 | OEM-A-23 | EMUPRO16-B-13 | 0.5 | no route | Rear primary O2 heater (RPO2SHTC) | — | |
| W63 | OEM-A-9 | EMUPRO16-A-25 | 0.5 | no route | Front secondary O2 heater (FSO2SHTC) | — | |
| W64 | OEM-A-17 | EMUPRO16-C-1 | 0.5 | no route | EVAP bypass solenoid (2WBS) | — | |
| W65 | OEM-A-20 | EMUPRO16-C-2 | 0.5 | no route | IAB control solenoid (IABCS) | — | |
| W66 | OEM-A-21 | EMUPRO16-C-3 | 0.5 | no route | EVAP purge control solenoid (PCS) | — | |
| W67 | OEM-A-4 | EMUPRO16-D-13 | 0.5 | no route | EVAP canister vent shut valve (VSV) | — | |
| W68 | OEM-A-6 | EMUPRO16-D-19 | 0.5 | no route | EGR control solenoid (ESOL) | — | |
| W69 | OEM-A-7 | EMUPRO16-D-26 | 0.5 | no route | Malfunction indicator lamp (MIL) | — | |
| W70 | OEM-C-8 | EMUPRO16-D-25 | 0.5 | no route | Engine speed pulse (NEP) | — | |
| W71 | OEM-D-16 | EMUPRO16-C-33 | 0.5 | no route | Front secondary O2 signal (O2S FS) | — | |
| W72 | OEM-D-17 | EMUPRO16-C-19 | 0.5 | no route | Rear secondary O2 signal (O2S RS) | — | |
| W73 | OEM-D-18 | EMUPRO16-C-34 | 0.5 | no route | Front primary O2 signal (O2S FP) | — | |
| W74 | OEM-D-19 | EMUPRO16-C-12 | 0.5 | no route | Rear primary O2 signal (O2S RP) | — | |
| W75 | OEM-D-8 | EMUPRO16-D-21 | 0.5 | no route | Intake air temperature (IAT) | — | |
| W76 | OEM-D-20 | EMUPRO16-C-20 | 0.5 | no route | EGR valve lift sensor (EGRL) | — | |
| W77 | OEM-C-7 | EMUPRO16-A-13 | 0.5 | no route | Vehicle speed sensor (VSS) | — | |
| W78 | OEM-F-16 | EMUPRO16-A-22 | 0.5 | no route | Brake switch 1 (BKSW1) | — | |
| W79 | OEM-F-6 | EMUPRO16-A-14 | 0.5 | no route | Brake switch 2 (BKSW2) | — | |
| W80 | OEM-B-1 | EMUPRO16-A-24 | 0.5 | no route | VTEC pressure switch front (VTP SWF) | — | |
| W81 | OEM-B-3 | EMUPRO16-A-16 | 0.5 | no route | VTEC pressure switch rear (VTP SWR) | — | |
| W82 | OEM-B-4 | EMUPRO16-A-23 | 0.5 | no route | Neutral switch (NT SW, M/T) | — | |
| W83 | OEM-C-4 | EMUPRO16-A-15 | 0.5 | no route | Clutch switch (MTCLS, M/T) | — | |
| W84 | OEM-C-6 | EMUPRO16-D-11 | 0.5 | no route | Starter switch (STS) | — |
Bill of materials
| Category | Part number | Manufacturer | Description | Qty | Unit |
|---|---|---|---|---|---|
| connector | 1473416-1 | TE | Superseal 1.0 26-way plug, Key 3 | 1.000 | ea |
| connector | 3-1437290-7 | TE | Superseal 1.0 26-way plug | 1.000 | ea |
| connector | 4-1437290-0 | TE | Superseal 1.0 34-way plug, Key 1 | 1.000 | ea |
| connector | 4-1437290-1 | TE | Superseal 1.0 34-way plug, Key 2 | 1.000 | ea |
| terminal | 3-1447221-4 | TE | Superseal 1.0 socket terminal, 20 AWG (0.5 sq mm) | 65.000 | ea |
ECU setup sheet
| Role | Engine ref | Engine signal | Sensor | ECU point | ECU function | ECU class | Setup flag |
|---|---|---|---|---|---|---|---|
| No configured channels. | |||||||
Findings
Open (10)
| Severity | Code | Subject | Message |
|---|---|---|---|
| error | DBW_SENSOR_INPUT | tps | Only 0 throttle-position track(s) found. An electronic throttle needs two (main and sub) so the ECU can cross-check them. |
| error | REQUIRED_UNMAPPED | OEM-B-6 | Required OEM function "Cylinder position sensor 1 + (CYP 1P)" (trigger_in) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-11 | Required OEM function "Throttle motor phase 3 (PM3)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-12 | Required OEM function "Throttle motor phase 4 (PM4)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-4 | Required OEM function "Throttle motor phase 1 (PM1)" (hbridge_out) is not connected to the new ECU. |
| error | REQUIRED_UNMAPPED | OEM-G-5 | Required OEM function "Throttle motor phase 2 (PM2)" (hbridge_out) is not connected to the new ECU. |
| info | NET_FAMILY | OEM-C-8 ↔ EMUPRO16-D-25 | OEM-C-8 "Engine speed pulse (NEP)" [tacho_out] is wired to EMUPRO16-D-25 "Auxiliary 16" [low_side_out]. Tacho as a low-side output: check the tach needs a pull-up. |
| info | NET_FAMILY | OEM-D-7 ↔ EMUPRO16-C-11 | OEM-D-7 "Engine coolant temperature (ECT)" [temp_in] is wired to EMUPRO16-C-11 "Analog 3" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | NET_FAMILY | OEM-D-8 ↔ EMUPRO16-D-21 | OEM-D-8 "Intake air temperature (IAT)" [temp_in] is wired to EMUPRO16-D-21 "Precision analog 5" [analog_in]. Thermistor on a plain analog input needs a pull-up; check the channel can enable one. |
| info | UNMAPPED | OEM | 3 optional OEM pins are not mapped: OEM-B-5 Cylinder position sensor 2 + (CYP 2P); OEM-B-7 Crank position sensor 2 + (CKP 2P); OEM-D-4 K-line diagnostics |
Accepted (1)
| Code | Subject | Reason | By |
|---|---|---|---|
| REQUIRED_UNMAPPED | OEM-D-1 | Battery-constant (memory) feed of the stock ECU: the new ECU has no such input, so it is not needed. | mapping-proposal |
Notes
Fit check: unconfirmed. Confirm these before building: - Trigger pattern for Honda C32B not found in the ECU's docs (No C32B (NSX) trigger named.) - This car has Honda Type 1A (1997+) immobilizer; needs a delete/bypass Auto-mapped by auto_map() from the library pin data on 2026-10-11. Review every wire against both manuals before building. Open items: - OEM-B 6: Cylinder position sensor 1 + (CYP 1P): no free cam_vr/cam_hall/frequency_in input on ECUMASTER EMU PRO 16 - OEM-G 4: Throttle motor phase 1 (PM1): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 5: Throttle motor phase 2 (PM2): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 11: Throttle motor phase 3 (PM3): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand - OEM-G 12: Throttle motor phase 4 (PM4): no +/− pair in the pinout (multi-phase or half-documented motor); wire by hand Not wired: - OEM-D 1: Backup power (VBU): ECUMASTER EMU PRO 16 has no battery-constant input; not needed - OEM-B 7: Crank position sensor 2 + (CKP 2P): no free crank_vr/frequency_in input on ECUMASTER EMU PRO 16 - OEM-B 5: Cylinder position sensor 2 + (CYP 2P): no free cam_vr/cam_hall/frequency_in input on ECUMASTER EMU PRO 16 - OEM-D 4: K-line diagnostics: no free k_line on ECUMASTER EMU PRO 16 - EMUPRO16-B 15: +12V switched: not fed (the stock ECU has no ignition-sense pin); feed it from a switched-ignition source
Sources
| Reliability | Kind | Title | URL | Archive | Captured | SHA-256 |
|---|---|---|---|---|---|---|
| 4 | vendor_doc | 1997-2005 Acura NSX Service Manual §11 (PGM-FI), ECM terminal arrangement | https://www.manualslib.com/manual/1540331/Acura-Nsx-1997.html | — | — | — |
| 4 | vendor_doc | ECUMASTER EMU PRO 16 — pinout (Connectors A/B/C/D) | https://www.ecumaster.com/files/EMU_PRO/EMU_PRO_16_Pinout_v1.0.pdf | archive | 2026-10-05 | 72799bed63fb |